CADANT-TRAP-LOG-MIB
33 objects
This MIB defines objects which are used to control and report on Cadant proprietary event notificaton (trap) and logging operation.
Imported Objects
| CADANT-PRODUCTS-MIB | cadNotification |
| CADANT-TC | InetAddressIPv4or6 |
| DOCS-CABLE-DEVICE-MIB | docsDevEvControlEntry |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4998.1.1.6.2 | IdentitycadTrapLogMib | This MIB defines objects which are used to control and report on Cadant proprietary event notificaton (trap) and logging operation. | ||
| 1.3.6.1.4.1.4998.1.1.6.2.1 | NodecadTrapLogGlobals | |||
| 1.3.6.1.4.1.4998.1.1.6.2.1.1 | ScalarcadProprietaryLoggingEnabled | read-write | current | If this value is set to true, then all Cadant proprietary log entries are enabled. Otherwise, the syslog logs will consist only of standard logs entries. |
| 1.3.6.1.4.1.4998.1.1.6.2.1.2 | ScalarcadLocalLogSize | read-write | current | The maximum size of the local log, in number of entries. The local log is only what is put into the docsDevEventTable. |
| 1.3.6.1.4.1.4998.1.1.6.2.1.3 | ScalarcadLogHistorySize | read-write | current | The maximum size of the log history, in number of entries. This log contains both Cadant prioprietary and DOCSIS notifications. |
| 1.3.6.1.4.1.4998.1.1.6.2.1.4 | ScalarcadSyslogFacility | read-write | current | The syslog logging facility. |
| 1.3.6.1.4.1.4998.1.1.6.2.1.5 | ScalarcadCmTrapInhibit | read-write | current | Controls the generation of SNMP traps regarding to CM status change. A cleared bit indicates that a trap must be generated if a CM resets while in the correspo… |
| 1.3.6.1.4.1.4998.1.1.6.2.2 | TablecadEvControlTable | not-accessible | current | This table allows control of the reporting of event classes. For each event priority, a combination of logging and reporting mechanisms may be chosen. |
| 1.3.6.1.4.1.4998.1.1.6.2.2.1 | RowcadEvControlEntry | not-accessible | current | Allows configuration of the reporting mechanisms for a particular event priority. |
| 1.3.6.1.4.1.4998.1.1.6.2.2.1.1 | ColumncadEvReporting | read-write | current | Currently, only the console destination is persistent in SNMP. Transient sessions, such as telnet, are not configurable via the MIB. Those are configurable onl… |
| 1.3.6.1.4.1.4998.1.1.6.2.3 | TablecadEvOverrideTable | not-accessible | current | This table allows the event priority to be overridden. Each entry indicates an override condition for the given event. |
| 1.3.6.1.4.1.4998.1.1.6.2.3.1 | RowcadEvOverrideEntry | not-accessible | current | Allows configuration of the event priority overrides. |
| 1.3.6.1.4.1.4998.1.1.6.2.3.1.1 | ColumncadEvOvrdEvId | read-only | current | Uniquely identifies the type of event that is reported by this entry. |
| 1.3.6.1.4.1.4998.1.1.6.2.3.1.2 | ColumncadEvOvrdState | read-create | current | Indicates the current override state of the event. admit allows the event to be generated and inhibit prevents the event from being generated regardless of the… |
| 1.3.6.1.4.1.4998.1.1.6.2.3.1.3 | ColumncadEvOvrdRowStatus | read-create | current | This variable indicates the status of the entry. Valid values for a set include createAndGo(4) and destroy(6). |
| 1.3.6.1.4.1.4998.1.1.6.2.3.1.4 | ColumncadEvOvrdPriority | read-create | current | This field is only valid when the override state is set to priority and indicates the priority level that should be used when this notification is generated. |
| 1.3.6.1.4.1.4998.1.1.6.2.4 | TablecadSyslogSvrTable | not-accessible | current | This table stores syslog server information when there is more than one syslog server configured. |
| 1.3.6.1.4.1.4998.1.1.6.2.4.1 | RowcadSyslogSvrEntry | not-accessible | current | Syslog server information. |
| 1.3.6.1.4.1.4998.1.1.6.2.4.1.1 | ColumncadSyslogSvrIpAddr | not-accessible | current | IP address of the syslog server. |
| 1.3.6.1.4.1.4998.1.1.6.2.4.1.2 | ColumncadSyslogSvrFacility | read-create | current | Facility associated with the syslog server. |
| 1.3.6.1.4.1.4998.1.1.6.2.4.1.3 | ColumncadSyslogSvrRowStatus | read-create | current | This variable displays the status of the entry. |
| 1.3.6.1.4.1.4998.1.1.6.2.5 | TablecadCliAuthToLogLevelTable | not-accessible | current | This table is used to configure the logging level for each of the CLI authorization levels. |
| 1.3.6.1.4.1.4998.1.1.6.2.5.1 | RowcadCliAuthToLogLevelEntry | not-accessible | current | Syslog server information. |
| 1.3.6.1.4.1.4998.1.1.6.2.5.1.1 | ColumncadCliAuthLevel | not-accessible | current | A CLI authorization level. |
| 1.3.6.1.4.1.4998.1.1.6.2.5.1.2 | ColumncadCliLogLevel | read-write | current | The logging level that all commands assigned to this authorization level will be output at when executed. |
| 1.3.6.1.4.1.4998.1.1.6.2.10 | NodecadTrapLogMibConformance | |||
| 1.3.6.1.4.1.4998.1.1.6.2.10.1 | NodecadTrapLogCompliances | |||
| 1.3.6.1.4.1.4998.1.1.6.2.10.1.1 | CompliancecadTrapLogCompliance | current | Compliance statement for entities implementing the CADANT-TRAP-LOG-MIB | |
| 1.3.6.1.4.1.4998.1.1.6.2.10.2 | NodecadTrapLogGroups | |||
| 1.3.6.1.4.1.4998.1.1.6.2.10.2.1 | GroupcadTrapLogGlobalsGroup | current | Global trap and logging objects | |
| 1.3.6.1.4.1.4998.1.1.6.2.10.2.2 | GroupcadTrapLogEventGroup | current | Trap and log event control objects | |
| 1.3.6.1.4.1.4998.1.1.6.2.10.2.3 | GroupcadSyslogGroup | current | Syslog control objects | |
| 1.3.6.1.4.1.4998.1.1.6.2.10.2.4 | GroupcadCliAuthToLogLevelGroup | current | CLI authorization to log level mapping control objects |