CDE-MIB
38 objects
No module-level DESCRIPTION found.
Imported Objects
| RADWARE-MIB | rdwrConfigurationSync TruthValue |
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | IpAddress |
| RFC1213-MIB | PhysAddress |
| SNMPv2-SMI | Unsigned32 |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.89.35.1.161.1 | NoderdwrConfigurationSyncMonitor | |||
| 1.3.6.1.4.1.89.35.1.161.1.1 | ScalarrdwrConfSyncState | read-only | mandatory | The current state of the configuration synchronisation mechanism. |
| 1.3.6.1.4.1.89.35.1.161.1.2 | ScalarrdwrConfSyncIP | read-only | mandatory | The current IP interface used for the communication with the configuration peer. |
| 1.3.6.1.4.1.89.35.1.161.1.3 | ScalarrdwrConfSyncPeerIP | read-only | mandatory | The current IP of the configuration peer. |
| 1.3.6.1.4.1.89.35.1.161.1.4 | ScalarrdwrConfSyncPeerBaseMac | read-write | mandatory | The base MAC of the configuration peer device that is currently logged in or has last logged in. |
| 1.3.6.1.4.1.89.35.1.161.1.5 | ScalarrdwrConfSyncIncompatibilityReason | read-only | mandatory | The grounds for the incompatibilty between the primary device and the secondary device |
| 1.3.6.1.4.1.89.35.1.161.1.6 | ScalarrdwrConfSyncLastConfSyncTime | read-only | mandatory | The last time the configuration was successfully propagated from the master to the slave. The time is in seconds since epoch. |
| 1.3.6.1.4.1.89.35.1.161.1.7 | ScalarrdwrConfSyncLastConfFullSyncTime | read-only | mandatory | The last time a full configuration synchronisation was last performed. The time is in seconds since epoch. |
| 1.3.6.1.4.1.89.35.1.161.1.8 | ScalarrdwrConfSyncNumOfFullSyncOperations | read-only | mandatory | The number of full synchronisations successfully performed since the automatic configuration synchronisation was last enabled, or since the last reboot. |
| 1.3.6.1.4.1.89.35.1.161.1.9 | ScalarrdwrConfSyncNumOfSyncOperations | read-only | mandatory | The number of synchronisations operations performed since the last configuration full synchronisation, or since the last reboot. |
| 1.3.6.1.4.1.89.35.1.161.1.10 | ScalarrdwrConfSyncNumOfFailedSyncAttempts | read-only | mandatory | The number of synchronisation operations (incremental or full) that failed since the synchronisation was last enabled, or since the last reboot. |
| 1.3.6.1.4.1.89.35.1.161.1.11 | ScalarrdwrConfSyncPeerConfigVersion | read-only | mandatory | The configuration version the slave. |
| 1.3.6.1.4.1.89.35.1.161.1.12 | ScalarrdwrConfSyncConfigTimestamp | read-only | mandatory | Timestamp of the last configuration change in the machine. |
| 1.3.6.1.4.1.89.35.1.161.1.13 | ScalarrdwrConfSyncResetStatistics | read-write | mandatory | Reset the configuration synchronisation statistics. |
| 1.3.6.1.4.1.89.35.1.161.1.14 | ScalarrdwrConfSyncShouldReboot | read-only | mandatory | Whether master/slave are waiting for reboot. |
| 1.3.6.1.4.1.89.35.1.161.1.15 | ScalarrdwrConfSyncNumOfConnects | read-only | mandatory | Number of successful connections since last mode change or primary device reboot. |
| 1.3.6.1.4.1.89.35.1.161.1.16 | ScalarrdwrConfSyncNumOfDisconnects | read-only | mandatory | Number of times the master disconnected from the peer since last mode change or reboot. |
| 1.3.6.1.4.1.89.35.1.161.1.18 | ScalarrdwrConfSyncIPString | read-only | mandatory | The current IP interface used for the communication with the configuration peer. Similar to rdwrConfSyncIP but in string format to enable IPv6 support |
| 1.3.6.1.4.1.89.35.1.161.1.19 | ScalarrdwrConfSyncPeerIPString | read-only | mandatory | The current IP of the configuration peer. Similar to rdwrConfSyncPeerIP but in string format to enable IPv6 support. |
| 1.3.6.1.4.1.89.35.1.161.2 | NoderdwrConfigurationSyncConf | |||
| 1.3.6.1.4.1.89.35.1.161.2.1 | ScalarrdwrConfSyncMode | read-write | mandatory | The role of the device inthe configuration synchronisation and whether the feature is enabled. |
| 1.3.6.1.4.1.89.35.1.161.2.2 | ScalarrdwrConfSyncRetryTimeout | read-write | mandatory | Time in seconds between attempts to connect to configuration slave. Must be in the range of 1 second to 10 minutes. Default is 5 seconds. |
| 1.3.6.1.4.1.89.35.1.161.2.3 | ScalarrdwrConfSyncKeepAlivePeriod | read-write | mandatory | Time in seconds between keep-alive messages to slave. Must be in the range of 5 seconds to 10 minutes. Default is 10 seconds. |
| 1.3.6.1.4.1.89.35.1.161.2.4 | ScalarrdwrConfSyncRebootTimeout | read-write | mandatory | Time in seconds allowed for slave to reboot. After this time slave is considered disconnected. Must be in the range of 1 second to 10 minutes. Default is 4 min… |
| 1.3.6.1.4.1.89.35.1.161.2.5 | ScalarrdwrConfSyncPeerDiscTrapDelay | read-write | mandatory | Disconnected peer trap is only issued after this delay. If connection is reestablished within this time period trap is deferred. Must be in the range of 0 (imm… |
| 1.3.6.1.4.1.89.35.1.161.2.6 | ScalarrdwrConfSyncPeerResponseTimeout | read-write | mandatory | Time in seconds allowed for response to arrive from peer. If the timeout is exceeded, peer is considered disconnected. Must be in the range of 1 second to 10 m… |
| 1.3.6.1.4.1.89.35.1.161.2.7 | ScalarrdwrConfSyncMasterActivityTimeout | read-write | mandatory | Maximum time in seconds allowed by slave between master messages. If the timeout is exceeded. Slave considers master as disconnected. This value must be greate… |
| 1.3.6.1.4.1.89.35.1.161.2.8 | ScalarrdwrConfSyncAllowRebootActiveDevice | read-write | mandatory | Allow master to reboot slave event if the slave is the VRRP active device. Default value is false. |
| 1.3.6.1.4.1.89.35.1.161.2.9 | ScalarrdwrConfSyncRebootSlave | read-write | mandatory | Manually reboot the secondary device. |
| 1.3.6.1.4.1.89.35.1.161.2.10 | ScalarrdwrConfSyncExcludeMgmtIP | read-write | mandatory | Exclude the management ports IP interface from the synchronisations. When true the IPs have to be handled manually. Default value is false. |
| 1.3.6.1.4.1.89.35.1.161.2.11 | ScalarrdwrConfSyncExcludeMgmtCert | read-write | mandatory | Exclude the WBM & SSH service configuration and the certificates references from them from the synchronisations. When true, their configuration has to be handl… |
| 1.3.6.1.4.1.89.35.1.161.2.12 | ScalarrdwrConfSyncDiscoverMngIPOnly | read-write | obsolete | obsolete |
| 1.3.6.1.4.1.89.35.1.161.2.13 | ScalarrdwrConfSyncFullSyncDelay | read-write | mandatory | Time in seconds between the need to full sync is detected and the actual full sync operation. full sync will occure when this time is passed and the master wss… |
| 1.3.6.1.4.1.89.35.1.161.2.14 | ScalarrdwrConfSyncFullSyncMaxDelay | read-write | mandatory | Maximum time in seconds between the need to full sync is detected and the actual full sync operation. Full sync will occure if this time passed, even if the ma… |
| 1.3.6.1.4.1.89.35.1.161.2.15 | ScalarrdwrConfSyncCommunicationPassword | read-write | mandatory | Sets the password for the synchronization session. This is mandatory before activating the module. |
| 1.3.6.1.4.1.89.35.1.161.2.16 | ScalarrdwrConfSyncConnectionPreference | read-write | mandatory | Specifies the first choice of IP through which config-sync connects to peer. Can also be set to the values 'any' and 'any-mng-ip'. |
| 1.3.6.1.4.1.89.35.1.161.2.17 | ScalarrdwrConfSyncAlternateConnectionPreference | read-write | mandatory | Specifies the second choice of IP through which config-sync connects to peer. Can also be set to the values 'any', 'any-mng-ip' and 'none'. |
| 1.3.6.1.4.1.89.35.1.161.2.18 | ScalarrdwrConfSyncReconnect | read-write | mandatory | Manually reconnect the config-sync connection to the secondary device. |