CENTILLION-CONFIG-MIB
115 objects
No module-level DESCRIPTION found.
Imported Objects
| CENTILLION-ROOT-MIB | BitField EnableIndicator MacAddress StatusIndicator sysConfig |
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter IpAddress TimeTicks |
| RFC1213-MIB | DisplayString PhysAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.930.2.1.2.1 | NodesysTableConfig | |||
| 1.3.6.1.4.1.930.2.1.2.2 | NodesysImgInfo | |||
| 1.3.6.1.4.1.930.2.1.2.2.1 | NodesysImgGbl | |||
| 1.3.6.1.4.1.930.2.1.2.2.1.1 | ScalarsysImgGblInvokeSrc | read-write | mandatory | The source of system image to be invoked at next boot. Default setting is image1. If the desired image cannot be invoked, another image (if found and valid) wi… |
| 1.3.6.1.4.1.930.2.1.2.2.1.2 | ScalarsysImgGblLoadDst | read-write | mandatory | The non volatile memory destination where the system image will be (programmed by boot loader) down loaded to at next boot. Default setting is location1. Note … |
| 1.3.6.1.4.1.930.2.1.2.2.2 | TablesysImgTable | not-accessible | mandatory | A table that provides additional information about the system images. The number of entries in the table is determined by the number of index of the system ima… |
| 1.3.6.1.4.1.930.2.1.2.2.2.1 | RowsysImgEntry | not-accessible | mandatory | A row in the table of additional information about the system images. Entries can not be created or deleted via SNMP requests. |
| 1.3.6.1.4.1.930.2.1.2.2.2.1.1 | ColumnsysImgIndx | read-only | mandatory | The index of the system image. |
| 1.3.6.1.4.1.930.2.1.2.2.2.1.2 | ColumnsysImgVer | read-only | mandatory | The version of the system image stored in non volatile memory. Note that if the system does not support dual boot image, then zero length string should be retu… |
| 1.3.6.1.4.1.930.2.1.2.2.2.1.3 | ColumnsysImgStatus | read-only | mandatory | The status of system image stored in non volatile memory. |
| 1.3.6.1.4.1.930.2.1.2.3 | NodesysMcpRedundInfo | |||
| 1.3.6.1.4.1.930.2.1.2.3.1 | NodesysMcpRedundGbl | |||
| 1.3.6.1.4.1.930.2.1.2.3.1.1 | ScalarsysMcpRedundNxtGblState | read-write | mandatory | State of the Redundant MCP during next boot. Request to enable or disable redundant MCP. This will update the configuration information for the redundant MCP p… |
| 1.3.6.1.4.1.930.2.1.2.3.2 | TablesysMcpRedundTable | not-accessible | mandatory | A table that provides additional information about the system MCP redundancy. The number of entries in the table is determined by the number of index of the sy… |
| 1.3.6.1.4.1.930.2.1.2.3.2.1 | RowsysMcpRedundEntry | not-accessible | mandatory | A row in the table of additional information about the system MCP redundancy. Entries can not be created or deleted via SNMP requests. |
| 1.3.6.1.4.1.930.2.1.2.3.2.1.1 | ColumnsysMcpRedundIndx | read-only | mandatory | The index of the system MCP redundancy. Currently represents the slot number that this MCP is in. |
| 1.3.6.1.4.1.930.2.1.2.3.2.1.2 | ColumnsysMcpRedundPriority | read-write | mandatory | The MCP redundancy priority which is used for primary MCP selection. Default setting is zero. |
| 1.3.6.1.4.1.930.2.1.2.3.2.1.3 | ColumnsysMcpRedundType | read-only | mandatory | Functional type of MCP in the chassis. Currently only ATM MCPs can be used for the redundant function. Only MCPs in slots 1 and 2 can participate in redundancy… |
| 1.3.6.1.4.1.930.2.1.2.3.2.1.4 | ColumnsysMcpRedundOperState | read-only | mandatory | Current state of this MCP |
| 1.3.6.1.4.1.930.2.1.2.3.2.1.5 | ColumnsysMcpRedundCfgStatus | read-only | mandatory | State of the Redundant MCP. Other(1) is used when the MCP is not participating in redundancy, default enable/disable used to represent the factory default case… |
| 1.3.6.1.4.1.930.2.1.2.5 | TablerifTable | not-accessible | mandatory | This table contains Routing Information Field (RIF) parameters. Entries may be used by one or more stations on the switch. |
| 1.3.6.1.4.1.930.2.1.2.5.1 | RowrifEntry | not-accessible | mandatory | A single entry in the RIF table. |
| 1.3.6.1.4.1.930.2.1.2.5.1.1 | ColumnrifPath | read-only | mandatory | RIF field, read from left to right, i.e. read from the switch. |
| 1.3.6.1.4.1.930.2.1.2.5.1.2 | ColumnrifIndex | read-only | mandatory | Index into the RIF table. This index is used to enter a RIF in the station table. |
| 1.3.6.1.4.1.930.2.1.2.5.1.3 | ColumnrifInUse | read-write | mandatory | Indicates that this RIF entry is valid if set. A unique RIF entry may be deleted only if it is not in use by a station. |
| 1.3.6.1.4.1.930.2.1.2.5.1.4 | ColumnrifCount | read-only | mandatory | The number stations that this RIF is associated with. |
| 1.3.6.1.4.1.930.2.1.2.5.1.5 | ColumnrifLength | read-only | mandatory | Byte length of the RIF entry. |
| 1.3.6.1.4.1.930.2.1.2.5.1.6 | ColumnrifNext | read-only | mandatory | Next RIF field. |
| 1.3.6.1.4.1.930.2.1.2.5.1.7 | ColumnrifPrevious | read-only | mandatory | Previous RIF field. |
| 1.3.6.1.4.1.930.2.1.2.6 | ScalarsystemMaxPacketInfoSize | read-write | mandatory | The system maximum packet information field size. Changing the maximum information size does not take effect until the next system reset. |
| 1.3.6.1.4.1.930.2.1.2.7 | ScalarsystemConfigMode | read-write | mandatory | This variable describes the current mode of bridging configuration in the switch. The bridging mode applies to all ports. The value other(1) is a read-only ind… |
| 1.3.6.1.4.1.930.2.1.2.8 | ScalarmaxPerfMode | read-write | mandatory | The current value of the system maximum performance mode. Setting this value to enabled causes the system to perform in maximum performance mode. Default is di… |
| 1.3.6.1.4.1.930.2.1.2.10 | ScalarconfigSave | read-write | mandatory | Save the current configuration into flash memory. When read, this value is always clear (1). The value may only be set to the set (2) state. |
| 1.3.6.1.4.1.930.2.1.2.12 | ScalarlocalAdminMacAddress | read-write | mandatory | The system's locally administered MAC address. The current operation MAC address may be obtained by the ifPhysAddress entry in the ifTable. This parameter will… |
| 1.3.6.1.4.1.930.2.1.2.13 | ScalarconfigLogin | read-write | mandatory | The system login object. This object is used to login a network management station to the system for configuration. The format of the login request follows: lo… |
| 1.3.6.1.4.1.930.2.1.2.14 | NodesysNetProtocol | |||
| 1.3.6.1.4.1.930.2.1.2.14.1 | NodesysIpProtocol | |||
| 1.3.6.1.4.1.930.2.1.2.14.1.1 | ScalarsysAddr | read-write | deprecated | The system's IP address. The current operational IP address may be obtained by the ipAdEntAddr entry in the ipAddrTable. This parameter will take effect only a… |
| 1.3.6.1.4.1.930.2.1.2.14.1.2 | ScalarsysNetMask | read-write | deprecated | The system's IP subnet mask. The current operational IP subnet mask may be obtained by the ipAdEntNetMask entry in the ipAddrTable. This parameter will take ef… |
| 1.3.6.1.4.1.930.2.1.2.14.1.3 | ScalarsysBcastAddr | read-write | deprecated | The system's IP broadcast address. The current operational IP broadcast address may be obtained by the ipAdEntBcastAddr in the ipAddrTable. This parameter will… |
| 1.3.6.1.4.1.930.2.1.2.14.1.4 | ScalardefaultGatewayAddr | read-write | deprecated | The system's default getway IP address. the current operational default gateway's IP address can be obtained from the ipRoutingTable. This parameter will take … |
| 1.3.6.1.4.1.930.2.1.2.14.1.5 | ScalarconfigServerAddr | read-write | mandatory | The IP address to which the requests for configuration files are sent. The protocol used to retrieve the configuration is determined by the configProtocol obje… |
| 1.3.6.1.4.1.930.2.1.2.14.1.6 | ScalaripConfigProtocol | read-write | deprecated | The protocol used to obtain this IP addressing information. |
| 1.3.6.1.4.1.930.2.1.2.14.1.7 | ScalaripHostNumber | read-only | mandatory | The number of IP entities (regardless of their current state) present on this system. |
| 1.3.6.1.4.1.930.2.1.2.14.1.8 | TableipHostTable | not-accessible | mandatory | This table contains all the ip entities this agent manages. The number of entries is given by the value of ipHostNumber. |
| 1.3.6.1.4.1.930.2.1.2.14.1.8.1 | RowipHostEntry | not-accessible | mandatory | An IP entity entry containing objects regarding this IP entity. |
| 1.3.6.1.4.1.930.2.1.2.14.1.8.1.1 | ColumnipHostIndex | read-write | mandatory | An index to the ipHostTable. Its value ranges between 1 and the value of ipHostNumber. |
| 1.3.6.1.4.1.930.2.1.2.14.1.8.1.2 | ColumnipHostAddress | read-write | mandatory | The IP address of this entity. |
| 1.3.6.1.4.1.930.2.1.2.14.1.8.1.3 | ColumnipHostNetMask | read-write | mandatory | The subnet mask associated with the Ip address of this entry. |
| 1.3.6.1.4.1.930.2.1.2.14.1.8.1.4 | ColumnipHostBcastAddr | read-write | mandatory | The Broadcast address associated with the IP address of this entry. |
| 1.3.6.1.4.1.930.2.1.2.14.1.8.1.5 | ColumnipHostDefaultGatewayAddr | read-write | mandatory | The gateway address associated with the IP address of this entry. |
| 1.3.6.1.4.1.930.2.1.2.14.1.8.1.6 | ColumnipHostConfigProtocol | read-write | mandatory | The protocol used to obtain this IP host's addressing information. |
| 1.3.6.1.4.1.930.2.1.2.14.1.8.1.7 | ColumnipHostEnable | read-write | mandatory | Enable or disable of this ip host entry. |
| 1.3.6.1.4.1.930.2.1.2.14.1.8.1.8 | ColumnipHostType | read-only | mandatory | A read only object indicating the type of this IP entity. |
| 1.3.6.1.4.1.930.2.1.2.15 | ScalarconfigProtocol | read-write | mandatory | The protocol used to retrieve system configuration. Flash indicates that the configuration is read from the flash. tftpNoSave indicates that the TFTP protocol … |
| 1.3.6.1.4.1.930.2.1.2.16 | ScalarconfigFilename | read-write | mandatory | The name of the configuration file that is sent to the server. The actual boot protocol used to retrieve the file is determined by configProtocol. This paramet… |
| 1.3.6.1.4.1.930.2.1.2.17 | ScalarconfigSource | read-only | mandatory | An indication of how the system was actually configured. flashConfig indicates that the current configuration was obtained via flash. remoteConfig indicates th… |
| 1.3.6.1.4.1.930.2.1.2.18 | NodesysTFTPGroup | |||
| 1.3.6.1.4.1.930.2.1.2.18.1 | ScalarsysTFTPStart | read-write | mandatory | Setting sysTFTPStart to tftpGet(2) initiates a file transfer to the agent (download); tftpPut(3) initiates a file transfer to the server (upload). |
| 1.3.6.1.4.1.930.2.1.2.18.2 | ScalarsysTFTPIpAddress | read-write | mandatory | The IP Address of the TFTP server. |
| 1.3.6.1.4.1.930.2.1.2.18.3 | ScalarsysTFTPFileName | read-write | mandatory | The file name of the file to retrieve (tftpGet), or the name of the file to create (tftpPut). |
| 1.3.6.1.4.1.930.2.1.2.18.4 | ScalarsysTFTPFileType | read-write | mandatory | The type of file image to upload/download. The file type indicates to the agent what kind of file it is receiving. configuration(1) indicates an update of the … |
| 1.3.6.1.4.1.930.2.1.2.18.5 | ScalarsysTFTPResult | read-only | mandatory | The result of the last TFTP operation. |
| 1.3.6.1.4.1.930.2.1.2.19 | NodesysSNMPGroup | |||
| 1.3.6.1.4.1.930.2.1.2.19.1 | ScalarsysSNMPGetCommunity | read-write | mandatory | The system get community string. |
| 1.3.6.1.4.1.930.2.1.2.19.2 | ScalarsysSNMPSetCommunity | read-write | mandatory | The system set community string. |
| 1.3.6.1.4.1.930.2.1.2.19.3 | ScalarsysSNMPEnableTraps | read-write | mandatory | Indicates whether the SNMP agent process is permitted to generate traps. This object provides global trap enable status, as specific traps may be enabled or di… |
| 1.3.6.1.4.1.930.2.1.2.19.4 | TablesysSNMPTrapIPReceiverTable | not-accessible | mandatory | A table containing of network management stations that are to receive traps generated by the system. |
| 1.3.6.1.4.1.930.2.1.2.19.4.1 | RowsysSNMPTrapIPReceiverEntry | not-accessible | mandatory | A destination address and community string to a particular IP trap server. Entries are created by supplying a valid IP address of the trap server. |
| 1.3.6.1.4.1.930.2.1.2.19.4.1.1 | ColumntrapIPRcvrAddress | read-write | mandatory | The IP network address of the network management entity which will receive traps. |
| 1.3.6.1.4.1.930.2.1.2.19.4.1.2 | ColumntrapIPRcvrStatus | read-write | mandatory | Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the sysSNMPReceiverTrapTable. On a read, the value of val… |
| 1.3.6.1.4.1.930.2.1.2.19.4.1.3 | ColumntrapIPRcvrCommunity | read-write | mandatory | The community string to use for traps sent to this trap receiver. |
| 1.3.6.1.4.1.930.2.1.2.20 | ScalarsysMgmtRingNumber | read-write | mandatory | A unique ring number assigned to the system's managment entity. This ring will not appear as a source-route hop as it is seen only in frames destined to or sou… |
| 1.3.6.1.4.1.930.2.1.2.21 | NodenetbiosGroup | |||
| 1.3.6.1.4.1.930.2.1.2.21.1 | ScalarnetbiosNameTableAgingTimer | read-write | mandatory | The non-zero timeout period in seconds for aging out dynamically learned Netbios names. The default value is 300 seconds. |
| 1.3.6.1.4.1.930.2.1.2.21.2 | ScalarnetbiosNameQueryInterval | read-write | mandatory | The time period in hundreds of milliseconds in which NetBIOS name queries are allowed to be bridged. A value of 0 disables briding NetBIOS name queries. The de… |
| 1.3.6.1.4.1.930.2.1.2.21.3 | ScalarnetbiosNameTableFlush | read-write | mandatory | If set, indicates that the NetBIOS name table should be flushed. Flushing the table removes all of the dynamically learned entries from the NetBIOS name table.… |
| 1.3.6.1.4.1.930.2.1.2.21.4 | TablenetbiosNameTableEntry | not-accessible | deprecated | A NetBIOS name table. This table is a list of the NetBIOS names learned or configured on the switch. |
| 1.3.6.1.4.1.930.2.1.2.21.4.1 | RownetbiosNameEntry | not-accessible | deprecated | A NetBIOS name table entry. Entries may be deleted by setting the status object to invalid (2). Entries are added by specifying the name, station and ring or c… |
| 1.3.6.1.4.1.930.2.1.2.21.4.1.1 | ColumnnetbiosNameName | read-only | deprecated | The NetBIOS name. |
| 1.3.6.1.4.1.930.2.1.2.21.4.1.2 | ColumnnetbiosNameStatus | read-only | deprecated | The status of the NetBIOS name entry. Setting this object to invalid (2) causes the entry to be deleted from the name table. The value should always be read as… |
| 1.3.6.1.4.1.930.2.1.2.21.4.1.3 | ColumnnetbiosNameStationAddress | read-only | deprecated | The address of the station from which this name was learned or configured. This object must be specified when adding an entry into the table. |
| 1.3.6.1.4.1.930.2.1.2.21.4.1.4 | ColumnnetbiosNameVirtualRingNumber | read-only | deprecated | The virtual ring number from which the entry was learned or configured. If the switch is operating is a mode where virtual rings are invalid, then this number … |
| 1.3.6.1.4.1.930.2.1.2.21.4.1.5 | ColumnnetbiosNameCardNumber | read-only | deprecated | The card number from which the entry was learned or configured. If the switch is operating is a mode where virtual rings are valid, then this number will be 0.… |
| 1.3.6.1.4.1.930.2.1.2.21.4.1.6 | ColumnnetbiosNamePortNumber | read-only | deprecated | The port number from which the entry was learned or configured. If the switch is operating is a mode where virtual rings are valid, then this number will be 0.… |
| 1.3.6.1.4.1.930.2.1.2.21.4.1.7 | ColumnnetbiosNamePortType | read-only | deprecated | The type of port from which the entry was learned or configured. |
| 1.3.6.1.4.1.930.2.1.2.21.4.1.8 | ColumnnetbiosNameAge | read-only | deprecated | The amount of time (in hundredths of a second) before this entry is aged, or the elapsed time since the entry was learned or configured. |
| 1.3.6.1.4.1.930.2.1.2.21.4.1.9 | ColumnnetbiosNameProxies | read-only | deprecated | The number of times that the switch has proxied for this station. |
| 1.3.6.1.4.1.930.2.1.2.21.4.1.10 | ColumnnetbiosNameSuppressedQueries | read-only | deprecated | The number of NetBIOS name queries from this station which were suppressed by the switch due to the configured name query interval (netbiosNameQueryInterval) |
| 1.3.6.1.4.1.930.2.1.2.21.5 | TablecnnetbiosNameTableEntry | not-accessible | mandatory | A NetBIOS name table with VLAN information. This table is a list of the NetBIOS names learned or configured on the switch. |
| 1.3.6.1.4.1.930.2.1.2.21.5.1 | RowcnnetbiosNameEntry | not-accessible | mandatory | A NetBIOS name table entry. Entries may be deleted by setting the status object to invalid (2). Entries are added by specifying the name, station, ring or card… |
| 1.3.6.1.4.1.930.2.1.2.21.5.1.1 | ColumncnnetbiosNameName | read-only | mandatory | The NetBIOS name. |
| 1.3.6.1.4.1.930.2.1.2.21.5.1.2 | ColumncnnetbiosNameStatus | read-only | mandatory | The status of the NetBIOS name entry. Setting this object to invalid (2) causes the entry to be deleted from the name table. The value should always be read as… |
| 1.3.6.1.4.1.930.2.1.2.21.5.1.3 | ColumncnnetbiosNameStationAddress | read-only | mandatory | The address of the station from which this name was learned or configured. This object must be specified when adding an entry into the table. |
| 1.3.6.1.4.1.930.2.1.2.21.5.1.4 | ColumncnnetbiosNameVirtualRingNumber | read-only | mandatory | The virtual ring number from which the entry was learned or configured. If the switch is operating is a mode where virtual rings are invalid, then this number … |
| 1.3.6.1.4.1.930.2.1.2.21.5.1.5 | ColumncnnetbiosNameCardNumber | read-only | mandatory | The card number from which the entry was learned or configured. If the switch is operating is a mode where virtual rings are valid, then this number will be 0.… |
| 1.3.6.1.4.1.930.2.1.2.21.5.1.6 | ColumncnnetbiosNamePortNumber | read-only | mandatory | The port number from which the entry was learned or configured. If the switch is operating is a mode where virtual rings are valid, then this number will be 0.… |
| 1.3.6.1.4.1.930.2.1.2.21.5.1.7 | ColumncnnetbiosNameVlanId | read-only | mandatory | The 802.1q vid for the VLan from which the entry was learned or configured. This object must be specified when adding an entry in the table if appropriate. |
| 1.3.6.1.4.1.930.2.1.2.21.5.1.8 | ColumncnnetbiosNamePortType | read-only | mandatory | The type of port from which the entry was learned or configured. |
| 1.3.6.1.4.1.930.2.1.2.21.5.1.9 | ColumncnnetbiosNameAge | read-only | mandatory | The amount of time (in hundredths of a second) before this entry is aged, or the elapsed time since the entry was learned or configured. |
| 1.3.6.1.4.1.930.2.1.2.21.5.1.10 | ColumncnnetbiosNameProxies | read-only | mandatory | The number of times that the switch has proxied for this station. |
| 1.3.6.1.4.1.930.2.1.2.21.5.1.11 | ColumncnnetbiosNameSuppressedQueries | read-only | mandatory | The number of NetBIOS name queries from this station which were suppressed by the switch due to the configured name query interval (netbiosNameQueryInterval) |
| 1.3.6.1.4.1.930.2.1.2.25 | NodelnmGroup | |||
| 1.3.6.1.4.1.930.2.1.2.25.1 | ScalarlnmOperStatus | read-only | mandatory | This object reflects the actual state of LNM which may differ from that of the lnmAdminStatus object. This can occur when the LNM task has failed but the the c… |
| 1.3.6.1.4.1.930.2.1.2.25.2 | ScalarlnmAdminStatus | read-write | mandatory | The desired state of the LNM on the switch as prescribed by the operator. The actions of the agent will, if at all possible, eventually result in the desired s… |
| 1.3.6.1.4.1.930.2.1.2.25.3 | ScalarlnmBridgeGroupDisplayMode | read-write | mandatory | Indicates how LNM should display spanning tree groups. If set to aggregate, LNM displays all spanning tree groups as one internal management ring. If set to se… |
| 1.3.6.1.4.1.930.2.1.2.25.4 | ScalarlnmLinkPassword | read-write | mandatory | Indicates the use of the default LNM management password or the first 6 to 8 characters of the system password. |
| 1.3.6.1.4.1.930.2.1.2.28 | ScalarsonmpTrConfig | read-write | mandatory | The configuration status of the Token Ring auto-topology. If the value of this object is set to enable(1), the Token Ring auto-topology frames will be sent out… |
| 1.3.6.1.4.1.930.2.1.2.29 | ScalarsystemConfigIpOption | read-write | mandatory | Reading this object always returns other(1). Setting of this object, which is optional, must be accomplished in the same SNMP request that set systemConfigMode. |
| 1.3.6.1.4.1.930.2.1.2.30 | ScalarsonmpTrSpeed | read-write | mandatory | The Token Ring topology message (SONMP frame) transmit speed. The values that are read/write are: topFast(2)...short interval between transmitting topSlow(3)..… |
| 1.3.6.1.4.1.930.2.1.2.32 | ScalarsrUnknownFrameFlood | read-write | mandatory | Unknown Source Route Frame Flood. Enable/Disable flooding of Source Route Frames to the next hop while the route to the remote ring is being learned and circui… |
| 1.3.6.1.4.1.930.2.1.2.33 | ScalarsrbIeeeBpduEnable | read-write | mandatory | Send Srb/Ieee BPDU as explorer. Enable/Disable the sending of Srb/IEEE BPDU's as explorers, allowing some routers to receive the BPDU with a rif. |
| 1.3.6.1.4.1.930.2.1.2.34 | ScalartbRifProxyEnable | read-write | mandatory | Process route descriptor LE_ARP requests in token ring transparent bridging LANE. Enable/Disable the processing of LE_ARP requests for route descriptors when r… |
| 1.3.6.1.4.1.930.2.1.2.35 | ScalarcpuClkRate | read-only | mandatory | MCP Clock Rate. Indicates the speed at which the MCP processor functions. |
| 1.3.6.1.4.1.930.2.1.2.36 | ScalarmaxRids | read-only | mandatory | Maximum number of Reassembly Ids. Indicates the maximum number of RIDs the switch supports. Determined by the XRam installed on the ATM cards in the switch. |