CIE1000-IPMC-SNOOPING-MIB
209 objects
This is a private version of the IPMC Snooping MIB
Imported Objects
| CIE1000-TC | CIE1000DisplayString CIE1000InterfaceIndex CIE1000PortList CIE1000RowEditorState CIE1000Unsigned8 |
| CISCO-IE1000-MIB | cie1000SwitchMgmt |
| INET-ADDRESS-MIB | InetAddressIPv6 |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.832.1.69 | Identitycie1000IpmcSnoopingMib | This is a private version of the IPMC Snooping MIB | ||
| 1.3.6.1.4.1.9.9.832.1.69.1 | Nodecie1000IpmcSnoopingMibObjects | |||
| 1.3.6.1.4.1.9.9.832.1.69.1.2 | Nodecie1000IpmcSnoopingConfig | |||
| 1.3.6.1.4.1.9.9.832.1.69.1.2.1 | Nodecie1000IpmcSnoopingConfigIgmpGlobals | |||
| 1.3.6.1.4.1.9.9.832.1.69.1.2.1.1 | Scalarcie1000IpmcSnoopingConfigIgmpGlobalsAdminState | read-write | current | Enable/Disable the IGMP snooping global functionality. |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.1.2 | Scalarcie1000IpmcSnoopingConfigIgmpGlobalsUnregisteredFlooding | read-write | current | Enable/Disable the control for flooding unregistered IPv4 multicast traffic. |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.1.3 | Scalarcie1000IpmcSnoopingConfigIgmpGlobalsSsmRangeAddress | read-write | current | The address prefix value defined for IGMP SSM service model. |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.1.4 | Scalarcie1000IpmcSnoopingConfigIgmpGlobalsSsmRangeMask | read-write | current | The address prefix length defined for IGMP SSM service model. |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.1.5 | Scalarcie1000IpmcSnoopingConfigIgmpGlobalsProxy | read-write | current | Enable/Disable the IGMP proxy functionality. |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.1.6 | Scalarcie1000IpmcSnoopingConfigIgmpGlobalsLeaveProxy | read-write | current | Enable/Disable the IGMP leave-proxy functionality. |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.2 | Tablecie1000IpmcSnoopingConfigIgmpPortTable | not-accessible | current | This is a table for managing extra IGMP snooping helper features per port basis |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.2.1 | Rowcie1000IpmcSnoopingConfigIgmpPortEntry | not-accessible | current | Each port has a set of parameters |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.2.1.1 | Columncie1000IpmcSnoopingConfigIgmpPortPortIndex | accessible-for-notify | current | Logical interface number of the physical port. |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.2.1.2 | Columncie1000IpmcSnoopingConfigIgmpPortAsRouterPort | read-write | current | Enable/Disable the IGMP static router port functionality. |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.2.1.3 | Columncie1000IpmcSnoopingConfigIgmpPortDoFastLeave | read-write | current | Enable/Disable the IGMP fast leave functionality. |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.2.1.4 | Columncie1000IpmcSnoopingConfigIgmpPortThrottlingNumber | read-write | current | The maximum number of groups to be registered on the specific port. |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.2.1.5 | Columncie1000IpmcSnoopingConfigIgmpPortFilteringProfile | read-write | current | The profile used for IGMP filtering per-port basis. |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.3 | Tablecie1000IpmcSnoopingConfigIgmpIfTable | not-accessible | current | This is a table for managing IGMP Snooping VLAN interface entries. |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.3.1 | Rowcie1000IpmcSnoopingConfigIgmpIfEntry | not-accessible | current | Each entry has a set of parameters |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.3.1.1 | Columncie1000IpmcSnoopingConfigIgmpIfIfIndex | accessible-for-notify | current | Logical interface number of the VLAN interface. |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.3.1.2 | Columncie1000IpmcSnoopingConfigIgmpIfAdminState | read-write | current | Enable/Disable the IGMP snooping per-VLAN functionality. |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.3.1.3 | Columncie1000IpmcSnoopingConfigIgmpIfQuerierElection | read-write | current | Enable/Disable the capability to run IGMP Querier election per-VLAN basis. |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.3.1.4 | Columncie1000IpmcSnoopingConfigIgmpIfQuerierAddress | read-write | current | The static IPv4 source address of the specific IGMP interface for seding IGMP Query message with respect to IGMP Querier election. |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.3.1.5 | Columncie1000IpmcSnoopingConfigIgmpIfCompatibility | read-write | current | The compatibility control for IGMP snooping to run the corresponding protocol version. |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.3.1.6 | Columncie1000IpmcSnoopingConfigIgmpIfPriority | read-write | current | This setting is used for prioritizing the IGMP control frames to be sent for IGMP snooping. |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.3.1.7 | Columncie1000IpmcSnoopingConfigIgmpIfRv | read-write | current | This setting Robustness Variable is used to control IGMP protocol stack as stated in RFC-3376 8.1. |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.3.1.8 | Columncie1000IpmcSnoopingConfigIgmpIfQi | read-write | current | This setting Query Interval is used to control IGMP protocol stack as stated in RFC-3376 8.2. |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.3.1.9 | Columncie1000IpmcSnoopingConfigIgmpIfQri | read-write | current | This setting Query Response Intervalis used to control IGMP protocol stack as stated in RFC-3376 8.3. |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.3.1.10 | Columncie1000IpmcSnoopingConfigIgmpIfLmqi | read-write | current | This setting Last Member Query Interval is used to control IGMP protocol stack as stated in RFC-3376 8.8. |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.3.1.11 | Columncie1000IpmcSnoopingConfigIgmpIfUri | read-write | current | This setting Unsolicited Report Interval is used to control IGMP protocol stack as stated in RFC-3376 8.11. |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.3.1.100 | Columncie1000IpmcSnoopingConfigIgmpIfAction | read-write | current | Action |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.4 | Nodecie1000IpmcSnoopingConfigIgmpIfTableRowEditor | |||
| 1.3.6.1.4.1.9.9.832.1.69.1.2.4.1 | Scalarcie1000IpmcSnoopingConfigIgmpIfTableRowEditorIfIndex | read-write | current | Logical interface number of the VLAN interface. |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.4.2 | Scalarcie1000IpmcSnoopingConfigIgmpIfTableRowEditorAdminState | read-write | current | Enable/Disable the IGMP snooping per-VLAN functionality. |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.4.3 | Scalarcie1000IpmcSnoopingConfigIgmpIfTableRowEditorQuerierElection | read-write | current | Enable/Disable the capability to run IGMP Querier election per-VLAN basis. |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.4.4 | Scalarcie1000IpmcSnoopingConfigIgmpIfTableRowEditorQuerierAddress | read-write | current | The static IPv4 source address of the specific IGMP interface for seding IGMP Query message with respect to IGMP Querier election. |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.4.5 | Scalarcie1000IpmcSnoopingConfigIgmpIfTableRowEditorCompatibility | read-write | current | The compatibility control for IGMP snooping to run the corresponding protocol version. |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.4.6 | Scalarcie1000IpmcSnoopingConfigIgmpIfTableRowEditorPriority | read-write | current | This setting is used for prioritizing the IGMP control frames to be sent for IGMP snooping. |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.4.7 | Scalarcie1000IpmcSnoopingConfigIgmpIfTableRowEditorRv | read-write | current | This setting Robustness Variable is used to control IGMP protocol stack as stated in RFC-3376 8.1. |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.4.8 | Scalarcie1000IpmcSnoopingConfigIgmpIfTableRowEditorQi | read-write | current | This setting Query Interval is used to control IGMP protocol stack as stated in RFC-3376 8.2. |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.4.9 | Scalarcie1000IpmcSnoopingConfigIgmpIfTableRowEditorQri | read-write | current | This setting Query Response Intervalis used to control IGMP protocol stack as stated in RFC-3376 8.3. |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.4.10 | Scalarcie1000IpmcSnoopingConfigIgmpIfTableRowEditorLmqi | read-write | current | This setting Last Member Query Interval is used to control IGMP protocol stack as stated in RFC-3376 8.8. |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.4.11 | Scalarcie1000IpmcSnoopingConfigIgmpIfTableRowEditorUri | read-write | current | This setting Unsolicited Report Interval is used to control IGMP protocol stack as stated in RFC-3376 8.11. |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.4.100 | Scalarcie1000IpmcSnoopingConfigIgmpIfTableRowEditorAction | read-write | current | Action |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.5 | Nodecie1000IpmcSnoopingConfigMldGlobals | |||
| 1.3.6.1.4.1.9.9.832.1.69.1.2.5.1 | Scalarcie1000IpmcSnoopingConfigMldGlobalsAdminState | read-write | current | Enable/Disable the MLD snooping global functionality. |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.5.2 | Scalarcie1000IpmcSnoopingConfigMldGlobalsUnregisteredFlooding | read-write | current | Enable/Disable the control for flooding unregistered IPv6 multicast traffic. |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.5.3 | Scalarcie1000IpmcSnoopingConfigMldGlobalsSsmRangeAddress | read-write | current | The address prefix value defined for MLD SSM service model. |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.5.4 | Scalarcie1000IpmcSnoopingConfigMldGlobalsSsmRangeMask | read-write | current | The address prefix length defined for MLD SSM service model. |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.5.5 | Scalarcie1000IpmcSnoopingConfigMldGlobalsProxy | read-write | current | Enable/Disable the MLD proxy functionality. |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.5.6 | Scalarcie1000IpmcSnoopingConfigMldGlobalsLeaveProxy | read-write | current | Enable/Disable the MLD leave-proxy functionality. |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.6 | Tablecie1000IpmcSnoopingConfigMldPortTable | not-accessible | current | This is a table for managing extra MLD snooping helper features per port basis |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.6.1 | Rowcie1000IpmcSnoopingConfigMldPortEntry | not-accessible | current | Each port has a set of parameters |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.6.1.1 | Columncie1000IpmcSnoopingConfigMldPortPortIndex | accessible-for-notify | current | Logical interface number of the physical port. |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.6.1.2 | Columncie1000IpmcSnoopingConfigMldPortAsRouterPort | read-write | current | Enable/Disable the MLD static router port functionality. |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.6.1.3 | Columncie1000IpmcSnoopingConfigMldPortDoFastLeave | read-write | current | Enable/Disable the MLD fast leave functionality. |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.6.1.4 | Columncie1000IpmcSnoopingConfigMldPortThrottlingNumber | read-write | current | The maximum number of groups to be registered on the specific port. |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.6.1.5 | Columncie1000IpmcSnoopingConfigMldPortFilteringProfile | read-write | current | The profile used for MLD filtering per-port basis. |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.7 | Tablecie1000IpmcSnoopingConfigMldIfTable | not-accessible | current | This is a table for managing MLD Snooping VLAN interface entries. |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.7.1 | Rowcie1000IpmcSnoopingConfigMldIfEntry | not-accessible | current | Each entry has a set of parameters |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.7.1.1 | Columncie1000IpmcSnoopingConfigMldIfIfIndex | accessible-for-notify | current | Logical interface number of the VLAN interface. |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.7.1.2 | Columncie1000IpmcSnoopingConfigMldIfAdminState | read-write | current | Enable/Disable the MLD snooping per-VLAN functionality. |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.7.1.3 | Columncie1000IpmcSnoopingConfigMldIfQuerierElection | read-write | current | Enable/Disable the capability to run MLD Querier election per-VLAN basis. |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.7.1.4 | Columncie1000IpmcSnoopingConfigMldIfCompatibility | read-write | current | The compatibility control for MLD snooping to run the corresponding protocol version. |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.7.1.5 | Columncie1000IpmcSnoopingConfigMldIfPriority | read-write | current | This setting is used for prioritizing the MLD control frames to be sent for MLD snooping. |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.7.1.6 | Columncie1000IpmcSnoopingConfigMldIfRv | read-write | current | This setting Robustness Variableis used to control MLD protocol stack as stated in RFC-3810 9.1. |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.7.1.7 | Columncie1000IpmcSnoopingConfigMldIfQi | read-write | current | This setting Query Intervalis used to control MLD protocol stack as stated in RFC-3810 9.2. |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.7.1.8 | Columncie1000IpmcSnoopingConfigMldIfQri | read-write | current | This setting Query Response Intervalis used to control MLD protocol stack as stated in RFC-3810 9.3. |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.7.1.9 | Columncie1000IpmcSnoopingConfigMldIfLlqi | read-write | current | This setting Last Listener Query Interval is used to control MLD protocol stack as stated in RFC-3810 9.8. |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.7.1.10 | Columncie1000IpmcSnoopingConfigMldIfUri | read-write | current | This setting Unsolicited Report Intervalis used to control MLD protocol stack as stated in RFC-3810 9.11. |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.7.1.100 | Columncie1000IpmcSnoopingConfigMldIfAction | read-write | current | Action |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.8 | Nodecie1000IpmcSnoopingConfigMldIfTableRowEditor | |||
| 1.3.6.1.4.1.9.9.832.1.69.1.2.8.1 | Scalarcie1000IpmcSnoopingConfigMldIfTableRowEditorIfIndex | read-write | current | Logical interface number of the VLAN interface. |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.8.2 | Scalarcie1000IpmcSnoopingConfigMldIfTableRowEditorAdminState | read-write | current | Enable/Disable the MLD snooping per-VLAN functionality. |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.8.3 | Scalarcie1000IpmcSnoopingConfigMldIfTableRowEditorQuerierElection | read-write | current | Enable/Disable the capability to run MLD Querier election per-VLAN basis. |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.8.4 | Scalarcie1000IpmcSnoopingConfigMldIfTableRowEditorCompatibility | read-write | current | The compatibility control for MLD snooping to run the corresponding protocol version. |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.8.5 | Scalarcie1000IpmcSnoopingConfigMldIfTableRowEditorPriority | read-write | current | This setting is used for prioritizing the MLD control frames to be sent for MLD snooping. |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.8.6 | Scalarcie1000IpmcSnoopingConfigMldIfTableRowEditorRv | read-write | current | This setting Robustness Variableis used to control MLD protocol stack as stated in RFC-3810 9.1. |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.8.7 | Scalarcie1000IpmcSnoopingConfigMldIfTableRowEditorQi | read-write | current | This setting Query Intervalis used to control MLD protocol stack as stated in RFC-3810 9.2. |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.8.8 | Scalarcie1000IpmcSnoopingConfigMldIfTableRowEditorQri | read-write | current | This setting Query Response Intervalis used to control MLD protocol stack as stated in RFC-3810 9.3. |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.8.9 | Scalarcie1000IpmcSnoopingConfigMldIfTableRowEditorLlqi | read-write | current | This setting Last Listener Query Interval is used to control MLD protocol stack as stated in RFC-3810 9.8. |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.8.10 | Scalarcie1000IpmcSnoopingConfigMldIfTableRowEditorUri | read-write | current | This setting Unsolicited Report Intervalis used to control MLD protocol stack as stated in RFC-3810 9.11. |
| 1.3.6.1.4.1.9.9.832.1.69.1.2.8.100 | Scalarcie1000IpmcSnoopingConfigMldIfTableRowEditorAction | read-write | current | Action |
| 1.3.6.1.4.1.9.9.832.1.69.1.3 | Nodecie1000IpmcSnoopingStatus | |||
| 1.3.6.1.4.1.9.9.832.1.69.1.3.1 | Nodecie1000IpmcSnoopingStatusGroupAddressCount | |||
| 1.3.6.1.4.1.9.9.832.1.69.1.3.1.1 | Scalarcie1000IpmcSnoopingStatusGroupAddressCountFromIgmp | read-only | current | It is used to denote the total number of registered multicast group address from IGMP snooping. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.1.2 | Scalarcie1000IpmcSnoopingStatusGroupAddressCountFromMld | read-only | current | It is used to denote the total number of registered multicast group address from MLD snooping. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.2 | Tablecie1000IpmcSnoopingStatusIgmpRouterPortTable | not-accessible | current | This is a table for displaying the router port status from IGMP snooping configuration. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.2.1 | Rowcie1000IpmcSnoopingStatusIgmpRouterPortEntry | not-accessible | current | Each entry has a set of parameters. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.2.1.1 | Columncie1000IpmcSnoopingStatusIgmpRouterPortPortIndex | accessible-for-notify | current | Logical interface number of the physical port. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.2.1.2 | Columncie1000IpmcSnoopingStatusIgmpRouterPortStatus | read-only | current | The IGMP snooping router port status. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.3 | Tablecie1000IpmcSnoopingStatusIgmpVlanTable | not-accessible | current | This is a table for displaying the per VLAN interface status in IGMP snooping configuration. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.3.1 | Rowcie1000IpmcSnoopingStatusIgmpVlanEntry | not-accessible | current | Each entry has a set of parameters. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.3.1.1 | Columncie1000IpmcSnoopingStatusIgmpVlanIfIndex | accessible-for-notify | current | Logical interface number of the VLAN interface. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.3.1.2 | Columncie1000IpmcSnoopingStatusIgmpVlanQuerierStatus | read-only | current | The IGMP Querier status of the specific VLAN interface. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.3.1.3 | Columncie1000IpmcSnoopingStatusIgmpVlanActiveQuerierAddress | read-only | current | The active IGMP Querier address on the specific VLAN interface. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.3.1.4 | Columncie1000IpmcSnoopingStatusIgmpVlanQuerierUptime | read-only | current | It presents the in operation timer for the specific interface act as a IGMP Querier. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.3.1.5 | Columncie1000IpmcSnoopingStatusIgmpVlanQueryInterval | read-only | current | This setting is used to control IGMP protocol stack as stated in RFC-3376 8.2. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.3.1.6 | Columncie1000IpmcSnoopingStatusIgmpVlanStartupQueryCount | read-only | current | This setting is used to control IGMP protocol stack as stated in RFC-3376 8.7. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.3.1.7 | Columncie1000IpmcSnoopingStatusIgmpVlanQuerierExpiryTime | read-only | current | This setting is used to control IGMP protocol stack as stated in RFC-3376 8.5. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.3.1.8 | Columncie1000IpmcSnoopingStatusIgmpVlanQuerierVersion | read-only | current | It presents the current IGMP version that the IGMP interface should behave in running IGMP protocol as a router. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.3.1.9 | Columncie1000IpmcSnoopingStatusIgmpVlanQuerierPresentTimeout | read-only | current | This setting is used to control IGMP protocol stack as stated in RFC-3376 8.12. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.3.1.10 | Columncie1000IpmcSnoopingStatusIgmpVlanHostVersion | read-only | current | It presents the current IGMP version that the IGMP interface should behave in running IGMP protocol as a host. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.3.1.11 | Columncie1000IpmcSnoopingStatusIgmpVlanHostPresentTimeout | read-only | current | This setting is used to control IGMP protocol stack as stated in RFC-3376 8.13. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.3.1.12 | Columncie1000IpmcSnoopingStatusIgmpVlanCounterTxQuery | read-only | current | It presents the current packet count on the specific IGMP interface for transmitting IGMP Query control frames. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.3.1.13 | Columncie1000IpmcSnoopingStatusIgmpVlanCounterTxSpecificQuery | read-only | current | It presents the current packet count on the specific IGMP interface for transmitting IGMP Specific Query control frames. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.3.1.14 | Columncie1000IpmcSnoopingStatusIgmpVlanCounterRxQuery | read-only | current | It presents the current packet count on the specific IGMP interface for receiving IGMP Query control frames. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.3.1.15 | Columncie1000IpmcSnoopingStatusIgmpVlanCounterRxV1Join | read-only | current | It presents the current packet count on the specific IGMP interface for receiving IGMPv1 Join control frames. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.3.1.16 | Columncie1000IpmcSnoopingStatusIgmpVlanCounterRxV2Join | read-only | current | It presents the current packet count on the specific IGMP interface for receiving IGMPv2 Join control frames. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.3.1.17 | Columncie1000IpmcSnoopingStatusIgmpVlanCounterRxV2Leave | read-only | current | It presents the current packet count on the specific IGMP interface for receiving IGMPv2 Leave control frames. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.3.1.18 | Columncie1000IpmcSnoopingStatusIgmpVlanCounterRxV3Join | read-only | current | It presents the current packet count on the specific IGMP interface for receiving IGMPv3 Join control frames. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.3.1.19 | Columncie1000IpmcSnoopingStatusIgmpVlanCounterRxErrors | read-only | current | It presents the current packet count on the specific IGMP interface for receiving invalid IGMP control frames. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.4 | Tablecie1000IpmcSnoopingStatusIgmpGroupAddressTable | not-accessible | current | This is a table for displaying the registered IPv4 multicast group address status from IGMP snooping. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.4.1 | Rowcie1000IpmcSnoopingStatusIgmpGroupAddressEntry | not-accessible | current | Each entry has a set of parameters. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.4.1.1 | Columncie1000IpmcSnoopingStatusIgmpGroupAddressIfIndex | accessible-for-notify | current | Logical interface number of the VLAN interface. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.4.1.2 | Columncie1000IpmcSnoopingStatusIgmpGroupAddressGroupAddress | accessible-for-notify | current | Assigned IPv4 multicast address. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.4.1.3 | Columncie1000IpmcSnoopingStatusIgmpGroupAddressMemberPorts | read-only | current | It is used to denote the memberships of the registered multicast group address from IGMP snooping. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.4.1.4 | Columncie1000IpmcSnoopingStatusIgmpGroupAddressHardwareSwitch | read-only | current | It is used to denote whether the multicast traffic destined to the registered group address could be forwarding by switch hardware or not. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.5 | Tablecie1000IpmcSnoopingStatusIgmpGroupSrcListTable | not-accessible | current | This is a table for displaying the address SFM (a.k.a Source List Multicast) status in source list of the registered IPv4 multicast group from IGMP snooping. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.5.1 | Rowcie1000IpmcSnoopingStatusIgmpGroupSrcListEntry | not-accessible | current | Each entry has a set of parameters. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.5.1.1 | Columncie1000IpmcSnoopingStatusIgmpGroupSrcListIfIndex | accessible-for-notify | current | Logical interface number of the VLAN interface. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.5.1.2 | Columncie1000IpmcSnoopingStatusIgmpGroupSrcListGroupAddress | accessible-for-notify | current | Assigned IPv4 multicast address. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.5.1.3 | Columncie1000IpmcSnoopingStatusIgmpGroupSrcListPortIndex | accessible-for-notify | current | Logical interface number of the physical port. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.5.1.4 | Columncie1000IpmcSnoopingStatusIgmpGroupSrcListHostAddress | accessible-for-notify | current | Assigned IPv4 source address. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.5.1.5 | Columncie1000IpmcSnoopingStatusIgmpGroupSrcListGroupFilterMode | read-only | current | It is used to denote the source filtering mode of the specific registered multicast group address from IGMP snooping. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.5.1.6 | Columncie1000IpmcSnoopingStatusIgmpGroupSrcListFilterTimer | read-only | current | It is used to count down the timer for the specific multicast group's filtering mode transition. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.5.1.7 | Columncie1000IpmcSnoopingStatusIgmpGroupSrcListSourceType | read-only | current | It is used to denote the filtering type of the specific source address in multicasting to the registered group address. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.5.1.8 | Columncie1000IpmcSnoopingStatusIgmpGroupSrcListSourceTimer | read-only | current | It is used to count down the timer for purging the specific source address from the registered multicast group's source list. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.5.1.9 | Columncie1000IpmcSnoopingStatusIgmpGroupSrcListHardwareFilter | read-only | current | It is used to denote whether the traffic destined to the multicast group address from the specific source address could be forwarding by switch hardware or not. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.6 | Tablecie1000IpmcSnoopingStatusMldRouterPortTable | not-accessible | current | This is a table for displaying the router port status from MLD snooping configuration. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.6.1 | Rowcie1000IpmcSnoopingStatusMldRouterPortEntry | not-accessible | current | Each entry has a set of parameters. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.6.1.1 | Columncie1000IpmcSnoopingStatusMldRouterPortPortIndex | accessible-for-notify | current | Logical interface number of the physical port. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.6.1.2 | Columncie1000IpmcSnoopingStatusMldRouterPortStatus | read-only | current | The MLD snooping router port status. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.7 | Tablecie1000IpmcSnoopingStatusMldVlanTable | not-accessible | current | This is a table for displaying the per VLAN interface status in MLD snooping configuration. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.7.1 | Rowcie1000IpmcSnoopingStatusMldVlanEntry | not-accessible | current | Each entry has a set of parameters. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.7.1.1 | Columncie1000IpmcSnoopingStatusMldVlanIfIndex | accessible-for-notify | current | Logical interface number of the VLAN interface. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.7.1.2 | Columncie1000IpmcSnoopingStatusMldVlanQuerierStatus | read-only | current | The MLD Querier status of the specific VLAN interface. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.7.1.3 | Columncie1000IpmcSnoopingStatusMldVlanActiveQuerierAddress | read-only | current | The active MLD Querier address on the specific VLAN interface. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.7.1.4 | Columncie1000IpmcSnoopingStatusMldVlanQuerierUptime | read-only | current | It presents the in operation timer for the specific interface act as a MLD Querier. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.7.1.5 | Columncie1000IpmcSnoopingStatusMldVlanQueryInterval | read-only | current | This setting is used to control MLD protocol stack as stated in RFC-3810 9.2. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.7.1.6 | Columncie1000IpmcSnoopingStatusMldVlanStartupQueryCount | read-only | current | This setting is used to control MLD protocol stack as stated in RFC-3810 9.7. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.7.1.7 | Columncie1000IpmcSnoopingStatusMldVlanQuerierExpiryTime | read-only | current | This setting is used to control MLD protocol stack as stated in RFC-3810 9.5. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.7.1.8 | Columncie1000IpmcSnoopingStatusMldVlanQuerierVersion | read-only | current | It presents the current MLD version that the MLD interface should behave in running MLD protocol as a router. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.7.1.9 | Columncie1000IpmcSnoopingStatusMldVlanQuerierPresentTimeout | read-only | current | This setting is used to control MLD protocol stack as stated in RFC-3810 9.12. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.7.1.10 | Columncie1000IpmcSnoopingStatusMldVlanHostVersion | read-only | current | It presents the current MLD version that the MLD interface should behave in running MLD protocol as a host. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.7.1.11 | Columncie1000IpmcSnoopingStatusMldVlanHostPresentTimeout | read-only | current | This setting is used to control MLD protocol stack as stated in RFC-3810 9.13. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.7.1.12 | Columncie1000IpmcSnoopingStatusMldVlanCounterTxQuery | read-only | current | It presents the current packet count on the specific MLD interface for transmitting MLD Query control frames. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.7.1.13 | Columncie1000IpmcSnoopingStatusMldVlanCounterTxSpecificQuery | read-only | current | It presents the current packet count on the specific MLD interface for transmitting MLD Specific Query control frames. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.7.1.14 | Columncie1000IpmcSnoopingStatusMldVlanCounterRxQuery | read-only | current | It presents the current packet count on the specific MLD interface for receiving MLD Query control frames. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.7.1.15 | Columncie1000IpmcSnoopingStatusMldVlanCounterRxV1Report | read-only | current | It presents the current packet count on the specific MLD interface for receiving MLDv1 Report control frames. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.7.1.16 | Columncie1000IpmcSnoopingStatusMldVlanCounterRxV1Done | read-only | current | It presents the current packet count on the specific MLD interface for receiving MLDv1 Done control frames. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.7.1.17 | Columncie1000IpmcSnoopingStatusMldVlanCounterRxV2Report | read-only | current | It presents the current packet count on the specific MLD interface for receiving MLDv2 Report control frames. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.7.1.18 | Columncie1000IpmcSnoopingStatusMldVlanCounterRxErrors | read-only | current | It presents the current packet count on the specific MLD interface for receiving invalid MLD control frames. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.8 | Tablecie1000IpmcSnoopingStatusMldGroupAddressTable | not-accessible | current | This is a table for displaying the registered IPv6 multicast group address status from MLD snooping. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.8.1 | Rowcie1000IpmcSnoopingStatusMldGroupAddressEntry | not-accessible | current | Each entry has a set of parameters. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.8.1.1 | Columncie1000IpmcSnoopingStatusMldGroupAddressIfIndex | accessible-for-notify | current | Logical interface number of the VLAN interface. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.8.1.2 | Columncie1000IpmcSnoopingStatusMldGroupAddressGroupAddress | accessible-for-notify | current | Assigned IPv6 multicast address. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.8.1.3 | Columncie1000IpmcSnoopingStatusMldGroupAddressMemberPorts | read-only | current | It is used to denote the memberships of the registered multicast group address from MLD snooping. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.8.1.4 | Columncie1000IpmcSnoopingStatusMldGroupAddressHardwareSwitch | read-only | current | It is used to denote whether the multicast traffic destined to the registered group address could be forwarding by switch hardware or not. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.9 | Tablecie1000IpmcSnoopingStatusMldGroupSrcListTable | not-accessible | current | This is a table for displaying the address SFM (a.k.a Source List Multicast) status in source list of the registered IPv6 multicast group from MLD snooping. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.9.1 | Rowcie1000IpmcSnoopingStatusMldGroupSrcListEntry | not-accessible | current | Each entry has a set of parameters. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.9.1.1 | Columncie1000IpmcSnoopingStatusMldGroupSrcListIfIndex | accessible-for-notify | current | Logical interface number of the VLAN interface. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.9.1.2 | Columncie1000IpmcSnoopingStatusMldGroupSrcListGroupAddress | accessible-for-notify | current | Assigned IPv6 multicast address. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.9.1.3 | Columncie1000IpmcSnoopingStatusMldGroupSrcListPortIndex | accessible-for-notify | current | Logical interface number of the physical port. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.9.1.4 | Columncie1000IpmcSnoopingStatusMldGroupSrcListHostAddress | accessible-for-notify | current | Assigned IPv6 source address. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.9.1.5 | Columncie1000IpmcSnoopingStatusMldGroupSrcListGroupFilterMode | read-only | current | It is used to denote the source filtering mode of the specific registered multicast group address from MLD snooping. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.9.1.6 | Columncie1000IpmcSnoopingStatusMldGroupSrcListFilterTimer | read-only | current | It is used to count down the timer for the specific multicast group's filtering mode transition. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.9.1.7 | Columncie1000IpmcSnoopingStatusMldGroupSrcListSourceType | read-only | current | It is used to denote the filtering type of the specific source address in multicasting to the registered group address. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.9.1.8 | Columncie1000IpmcSnoopingStatusMldGroupSrcListSourceTimer | read-only | current | It is used to count down the timer for purging the specific source address from the registered multicast group's source list. |
| 1.3.6.1.4.1.9.9.832.1.69.1.3.9.1.9 | Columncie1000IpmcSnoopingStatusMldGroupSrcListHardwareFilter | read-only | current | It is used to denote whether the traffic destined to the multicast group address from the specific source address could be forwarding by switch hardware or not. |
| 1.3.6.1.4.1.9.9.832.1.69.1.4 | Nodecie1000IpmcSnoopingControl | |||
| 1.3.6.1.4.1.9.9.832.1.69.1.4.1 | Nodecie1000IpmcSnoopingControlStatistics | |||
| 1.3.6.1.4.1.9.9.832.1.69.1.4.1.1 | Nodecie1000IpmcSnoopingControlStatisticsIgmpClearByIfIndex | |||
| 1.3.6.1.4.1.9.9.832.1.69.1.4.1.1.1 | Scalarcie1000IpmcSnoopingControlStatisticsIgmpClearByIfIndexIfIndex | read-write | current | Logical interface number of the VLAN interface. |
| 1.3.6.1.4.1.9.9.832.1.69.1.4.1.2 | Nodecie1000IpmcSnoopingControlStatisticsMldClearByIfIndex | |||
| 1.3.6.1.4.1.9.9.832.1.69.1.4.1.2.1 | Scalarcie1000IpmcSnoopingControlStatisticsMldClearByIfIndexIfIndex | read-write | current | Logical interface number of the VLAN interface. |
| 1.3.6.1.4.1.9.9.832.1.69.2 | Nodecie1000IpmcSnoopingMibConformance | |||
| 1.3.6.1.4.1.9.9.832.1.69.2.1 | Nodecie1000IpmcSnoopingMibCompliances | |||
| 1.3.6.1.4.1.9.9.832.1.69.2.1.1 | Compliancecie1000IpmcSnoopingMibCompliance | current | The compliance statement for the implementation. | |
| 1.3.6.1.4.1.9.9.832.1.69.2.2 | Nodecie1000IpmcSnoopingMibGroups | |||
| 1.3.6.1.4.1.9.9.832.1.69.2.2.1 | Groupcie1000IpmcSnoopingConfigIgmpGlobalsInfoGroup | current | A collection of objects. | |
| 1.3.6.1.4.1.9.9.832.1.69.2.2.2 | Groupcie1000IpmcSnoopingConfigIgmpPortTableInfoGroup | current | A collection of objects. | |
| 1.3.6.1.4.1.9.9.832.1.69.2.2.3 | Groupcie1000IpmcSnoopingConfigIgmpIfTableInfoGroup | current | A collection of objects. | |
| 1.3.6.1.4.1.9.9.832.1.69.2.2.4 | Groupcie1000IpmcSnoopingConfigIgmpIfTableRowEditorInfoGroup | current | A collection of objects. | |
| 1.3.6.1.4.1.9.9.832.1.69.2.2.5 | Groupcie1000IpmcSnoopingConfigMldGlobalsInfoGroup | current | A collection of objects. | |
| 1.3.6.1.4.1.9.9.832.1.69.2.2.6 | Groupcie1000IpmcSnoopingConfigMldPortTableInfoGroup | current | A collection of objects. | |
| 1.3.6.1.4.1.9.9.832.1.69.2.2.7 | Groupcie1000IpmcSnoopingConfigMldIfTableInfoGroup | current | A collection of objects. | |
| 1.3.6.1.4.1.9.9.832.1.69.2.2.8 | Groupcie1000IpmcSnoopingConfigMldIfTableRowEditorInfoGroup | current | A collection of objects. | |
| 1.3.6.1.4.1.9.9.832.1.69.2.2.9 | Groupcie1000IpmcSnoopingStatusGroupAddressCountInfoGroup | current | A collection of objects. | |
| 1.3.6.1.4.1.9.9.832.1.69.2.2.10 | Groupcie1000IpmcSnoopingStatusIgmpRouterPortTableInfoGroup | current | A collection of objects. | |
| 1.3.6.1.4.1.9.9.832.1.69.2.2.11 | Groupcie1000IpmcSnoopingStatusIgmpVlanTableInfoGroup | current | A collection of objects. | |
| 1.3.6.1.4.1.9.9.832.1.69.2.2.12 | Groupcie1000IpmcSnoopingStatusIgmpGroupAddressTableInfoGroup | current | A collection of objects. | |
| 1.3.6.1.4.1.9.9.832.1.69.2.2.13 | Groupcie1000IpmcSnoopingStatusIgmpGroupSrcListTableInfoGroup | current | A collection of objects. | |
| 1.3.6.1.4.1.9.9.832.1.69.2.2.14 | Groupcie1000IpmcSnoopingStatusMldRouterPortTableInfoGroup | current | A collection of objects. | |
| 1.3.6.1.4.1.9.9.832.1.69.2.2.15 | Groupcie1000IpmcSnoopingStatusMldVlanTableInfoGroup | current | A collection of objects. | |
| 1.3.6.1.4.1.9.9.832.1.69.2.2.16 | Groupcie1000IpmcSnoopingStatusMldGroupAddressTableInfoGroup | current | A collection of objects. | |
| 1.3.6.1.4.1.9.9.832.1.69.2.2.17 | Groupcie1000IpmcSnoopingStatusMldGroupSrcListTableInfoGroup | current | A collection of objects. | |
| 1.3.6.1.4.1.9.9.832.1.69.2.2.18 | Groupcie1000IpmcSnoopingControlStatisticsIgmpClearByIfIndexInfoGroup | current | A collection of objects. | |
| 1.3.6.1.4.1.9.9.832.1.69.2.2.19 | Groupcie1000IpmcSnoopingControlStatisticsMldClearByIfIndexInfoGroup | current | A collection of objects. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CIE1000IpmcSnoopingIgmpGroupSrcListGroupFilterModeEnum | INTEGER { exclude(0), include(1), none(2) } | current | This enumeration indicates the group filter mode for a IGMP group address. |
| CIE1000IpmcSnoopingIgmpGroupSrcListSourceTypeEnum | INTEGER { deny(0), permit(1) } | current | This enumeration indicates the source filtering type from IGMP snooping. |
| CIE1000IpmcSnoopingIgmpInterfaceCompatibilityEnum | INTEGER { auto(0), igmpv1(1), igmpv2(2), igmpv3(3) } | current | This enumeration indicates the version compatibility for IGMP snooping VLAN interface. |
| CIE1000IpmcSnoopingIgmpRouterPortStatusEnum | INTEGER { none(0), static(1), dynamic(2), both(3) } | current | This enumeration indicates the router port status from IGMP snooping. |
| CIE1000IpmcSnoopingIgmpVlanStatusQuerierStatusEnum | INTEGER { disabled(0), initial(1), idle(2), active(3) } | current | This enumeration indicates the querier status for IGMP snooping VLAN interface. |
| CIE1000IpmcSnoopingMldGroupSrcListGroupFilterModeEnum | INTEGER { exclude(0), include(1), none(2) } | current | This enumeration indicates the group filter mode for a MLD group address. |
| CIE1000IpmcSnoopingMldGroupSrcListSourceEnum | INTEGER { deny(0), permit(1) } | current | This enumeration indicates the source filtering type from MLD snooping. |
| CIE1000IpmcSnoopingMldInterfaceCompatibilityEnum | INTEGER { auto(0), mldv1(1), mldv2(2) } | current | This enumeration indicates the version compatibility for MLD snooping VLAN interface. |
| CIE1000IpmcSnoopingMldRouterPortStatusEnum | INTEGER { none(0), static(1), dynamic(2), both(3) } | current | This enumeration indicates the router port status from MLD snooping. |
| CIE1000IpmcSnoopingMldVlanStatusQuerierStatusEnum | INTEGER { disabled(0), initial(1), idle(2), active(3) } | current | This enumeration indicates the querier status for MLD snooping VLAN interface. |