CIE1000-POE-MIB
45 objects
This is a private version of Power over Ethernet(PoE).
Imported Objects
| CIE1000-TC | CIE1000InterfaceIndex |
| CISCO-IE1000-MIB | cie1000SwitchMgmt |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.832.1.43 | Identitycie1000PoeMib | This is a private version of Power over Ethernet(PoE). | ||
| 1.3.6.1.4.1.9.9.832.1.43.1 | Nodecie1000PoeMibObjects | |||
| 1.3.6.1.4.1.9.9.832.1.43.1.1 | Nodecie1000PoeCapabilities | |||
| 1.3.6.1.4.1.9.9.832.1.43.1.1.1 | Tablecie1000PoeCapabilitiesInterfaceTable | not-accessible | current | This is a table to interface capabilities |
| 1.3.6.1.4.1.9.9.832.1.43.1.1.1.1 | Rowcie1000PoeCapabilitiesInterfaceEntry | not-accessible | current | Each interface has a set of capability parameters |
| 1.3.6.1.4.1.9.9.832.1.43.1.1.1.1.1 | Columncie1000PoeCapabilitiesInterfaceIfIndex | accessible-for-notify | current | Logical interface number. |
| 1.3.6.1.4.1.9.9.832.1.43.1.1.1.1.2 | Columncie1000PoeCapabilitiesInterfacePoE | read-only | current | Indicates whether interface is PoE capable or not. |
| 1.3.6.1.4.1.9.9.832.1.43.1.2 | Nodecie1000PoeConfig | |||
| 1.3.6.1.4.1.9.9.832.1.43.1.2.1 | Nodecie1000PoeConfigGlobals | |||
| 1.3.6.1.4.1.9.9.832.1.43.1.2.1.1 | Scalarcie1000PoeConfigGlobalsManagementMode | read-write | current | PoE management modes, six PoE management modes are supported. CLASS_RESERVED: Maximum port power determined by class, and power is managed according to power c… |
| 1.3.6.1.4.1.9.9.832.1.43.1.2.2 | Nodecie1000PoeConfigSwitch | |||
| 1.3.6.1.4.1.9.9.832.1.43.1.2.2.1 | Tablecie1000PoeConfigSwitchParamTable | not-accessible | current | This is a table to configure PoE configurations for a switch. |
| 1.3.6.1.4.1.9.9.832.1.43.1.2.2.1.1 | Rowcie1000PoeConfigSwitchParamEntry | not-accessible | current | Each switch has a set of PoE configurable parameters |
| 1.3.6.1.4.1.9.9.832.1.43.1.2.2.1.1.1 | Columncie1000PoeConfigSwitchParamSwitchId | accessible-for-notify | current | User Switch Id. |
| 1.3.6.1.4.1.9.9.832.1.43.1.2.2.1.1.2 | Columncie1000PoeConfigSwitchParamMaxPower | read-write | current | The Maximum power(in Watt) that the power sourcing equipment(such as switch) can deliver. |
| 1.3.6.1.4.1.9.9.832.1.43.1.2.2.1.1.3 | Columncie1000PoeConfigSwitchParamCapacitorDetection | read-write | current | Indicates whether switch capacitor detection feature is enabled or not. |
| 1.3.6.1.4.1.9.9.832.1.43.1.2.3 | Nodecie1000PoeConfigInterface | |||
| 1.3.6.1.4.1.9.9.832.1.43.1.2.3.1 | Tablecie1000PoeConfigInterfaceParamTable | not-accessible | current | This is a table to configure PoE configurations for a specific interface. |
| 1.3.6.1.4.1.9.9.832.1.43.1.2.3.1.1 | Rowcie1000PoeConfigInterfaceParamEntry | not-accessible | current | Each interface has a set of PoE configurable parameters |
| 1.3.6.1.4.1.9.9.832.1.43.1.2.3.1.1.1 | Columncie1000PoeConfigInterfaceParamIfIndex | accessible-for-notify | current | Logical interface number. |
| 1.3.6.1.4.1.9.9.832.1.43.1.2.3.1.1.2 | Columncie1000PoeConfigInterfaceParamMode | read-write | current | Set PoE mode or disable PoE feature, two PoE modes are supported. POE: Enables PoE based on IEEE 802.3af standard, and provides power up to 15.4W(154 deciwatt)… |
| 1.3.6.1.4.1.9.9.832.1.43.1.2.3.1.1.3 | Columncie1000PoeConfigInterfaceParamPriority | read-write | current | Set port power priority. Priority determines the order in which the interfaces will receive power. Interfaces with a higher priority will receive power before … |
| 1.3.6.1.4.1.9.9.832.1.43.1.2.3.1.1.4 | Columncie1000PoeConfigInterfaceParamMaxPower | read-write | current | Maximum port power(in deciwatt) that can be delivered to remote device. Maximum allowed values from 0 to 154 deciwatt in POE standard mode, and from 0 to 300 d… |
| 1.3.6.1.4.1.9.9.832.1.43.1.3 | Nodecie1000PoeStatus | |||
| 1.3.6.1.4.1.9.9.832.1.43.1.3.1 | Tablecie1000PoeStatusInterfaceTable | not-accessible | current | This is a table to Power over Ethernet interface status |
| 1.3.6.1.4.1.9.9.832.1.43.1.3.1.1 | Rowcie1000PoeStatusInterfaceEntry | not-accessible | current | Each interface has a set of status parameters |
| 1.3.6.1.4.1.9.9.832.1.43.1.3.1.1.1 | Columncie1000PoeStatusInterfaceIfIndex | accessible-for-notify | current | Logical interface number. |
| 1.3.6.1.4.1.9.9.832.1.43.1.3.1.1.2 | Columncie1000PoeStatusInterfacePDClass | read-only | current | Powered device(PD) negotiates a power class with sourcing equipment(PSE) during the time of initial connection, each class have a maximum supported power. Clas… |
| 1.3.6.1.4.1.9.9.832.1.43.1.3.1.1.3 | Columncie1000PoeStatusInterfaceCurrentState | read-only | current | Indicate port status. POWER_BUDGET_EXCEEDED: PoE is turned OFF due to power budget exceeded on PSE. NO_PD_DETECTED: No PD detected. PD_ON: PSE supplying power … |
| 1.3.6.1.4.1.9.9.832.1.43.1.3.1.1.4 | Columncie1000PoeStatusInterfacePowerConsumption | read-only | current | Indicates the power(in deciwatt) that the PD is consuming right now. |
| 1.3.6.1.4.1.9.9.832.1.43.1.3.1.1.5 | Columncie1000PoeStatusInterfacePowerReserved | read-only | current | Indicates the power(in deciwatt) that the PD has requested/reserved. |
| 1.3.6.1.4.1.9.9.832.1.43.1.3.1.1.6 | Columncie1000PoeStatusInterfaceCurrentConsumption | read-only | current | Indicates the current(in mA) that the PD is consuming right now. |
| 1.3.6.1.4.1.9.9.832.1.43.2 | Nodecie1000PoeMibConformance | |||
| 1.3.6.1.4.1.9.9.832.1.43.2.1 | Nodecie1000PoeMibCompliances | |||
| 1.3.6.1.4.1.9.9.832.1.43.2.1.1 | Compliancecie1000PoeMibCompliance | current | The compliance statement for the implementation. | |
| 1.3.6.1.4.1.9.9.832.1.43.2.2 | Nodecie1000PoeMibGroups | |||
| 1.3.6.1.4.1.9.9.832.1.43.2.2.1 | Groupcie1000PoeCapabilitiesInterfaceInfoGroup | current | A collection of objects. | |
| 1.3.6.1.4.1.9.9.832.1.43.2.2.2 | Groupcie1000PoeConfigGlobalsInfoGroup | current | A collection of objects. | |
| 1.3.6.1.4.1.9.9.832.1.43.2.2.3 | Groupcie1000PoeConfigSwitchParamTableInfoGroup | current | A collection of objects. | |
| 1.3.6.1.4.1.9.9.832.1.43.2.2.4 | Groupcie1000PoeConfigInterfaceParamTableInfoGroup | current | A collection of objects. | |
| 1.3.6.1.4.1.9.9.832.1.43.2.2.5 | Groupcie1000PoeStatusInterfaceTableInfoGroup | current | A collection of objects. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CIE1000poeMgmtModeType | INTEGER { classReservedPower(0), classConsumption(1), allocatedReservedPower(2), allocatedConsumption(3), lldpReservedPower(4), lldpConsumption(5) } | current | This enumeration defines the types of PoE management mode. |
| CIE1000poeModeType | INTEGER { disable(0), poeDot3af(1), poePlusDot3at(2) } | current | This enumeration defines the types of port PoE mode. |
| CIE1000poePowerPriorityType | INTEGER { low(0), high(1), critical(2) } | current | This enumeration defines the port power priority. |
| CIE1000poeStatusType | INTEGER { notSupported(0), budgetExceeded(1), noPoweredDeviceDetected(2), poweredDeviceOn(3), poweredDeviceOff(4), poweredDeviceOverloaded(5), unknownState(6), disabled(7) } | current | This enumeration defines the feature status. |