CIE1000-PSEC-MIB
61 objects
This is a private version of the Port Security MIB
Imported Objects
| CIE1000-TC | CIE1000DisplayString CIE1000InterfaceIndex CIE1000Unsigned16 |
| CISCO-IE1000-MIB | cie1000SwitchMgmt |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | MacAddress TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.832.1.66 | Identitycie1000PsecMib | This is a private version of the Port Security MIB | ||
| 1.3.6.1.4.1.9.9.832.1.66.1 | Nodecie1000PsecMibObjects | |||
| 1.3.6.1.4.1.9.9.832.1.66.1.2 | Nodecie1000PsecConfig | |||
| 1.3.6.1.4.1.9.9.832.1.66.1.2.1 | Nodecie1000PsecConfigGlobals | |||
| 1.3.6.1.4.1.9.9.832.1.66.1.2.1.1 | Scalarcie1000PsecConfigGlobalsEnabled | read-write | current | Globally enable/disable aging of secured entries. This doesn't affect aging of addresses secured by other modules. |
| 1.3.6.1.4.1.9.9.832.1.66.1.2.1.2 | Scalarcie1000PsecConfigGlobalsEnableAging | read-write | current | If aging is globally enabled, this is the aging period in seconds. Valid range is [10; 10000000] seconds(max is around 115 days). |
| 1.3.6.1.4.1.9.9.832.1.66.1.2.1.3 | Scalarcie1000PsecConfigGlobalsAgingPeriodSecs | read-write | current | If aging is globally enabled, this is the aging period in seconds. Valid range is [10; 10000000] seconds(max is around 115 days). |
| 1.3.6.1.4.1.9.9.832.1.66.1.2.2 | Tablecie1000PsecConfigPortTable | not-accessible | current | This is a table of port configuration per session |
| 1.3.6.1.4.1.9.9.832.1.66.1.2.2.1 | Rowcie1000PsecConfigPortEntry | not-accessible | current | Each session has a set of parameters |
| 1.3.6.1.4.1.9.9.832.1.66.1.2.2.1.1 | Columncie1000PsecConfigPortIfIndex | accessible-for-notify | current | Logical interface number of the physical port. |
| 1.3.6.1.4.1.9.9.832.1.66.1.2.2.1.2 | Columncie1000PsecConfigPortEnabled | read-write | current | Controls whether Port Security Limit Control is enabled for this port. |
| 1.3.6.1.4.1.9.9.832.1.66.1.2.2.1.3 | Columncie1000PsecConfigPortLimit | read-write | current | Maximum number of MAC addresses allowed on this port.Valid values = [PSEC_LIMIT_MIN; PSEC_LIMIT_MAX]. |
| 1.3.6.1.4.1.9.9.832.1.66.1.2.2.1.4 | Columncie1000PsecConfigPortAction | read-write | current | Action to take if number of MAC addresses exceeds the limit. NONE(0) Do nothing, except disallowing further clients. TRAP(1) Send an SNMP trap notification. SH… |
| 1.3.6.1.4.1.9.9.832.1.66.1.3 | Nodecie1000PsecStatus | |||
| 1.3.6.1.4.1.9.9.832.1.66.1.3.1 | Tablecie1000PsecStatusPortTable | not-accessible | current | This is a table of port configuration per session |
| 1.3.6.1.4.1.9.9.832.1.66.1.3.1.1 | Rowcie1000PsecStatusPortEntry | not-accessible | current | Each session has a set of parameters |
| 1.3.6.1.4.1.9.9.832.1.66.1.3.1.1.1 | Columncie1000PsecStatusPortIfIndex | accessible-for-notify | current | Logical interface number of the physical port. |
| 1.3.6.1.4.1.9.9.832.1.66.1.3.1.1.2 | Columncie1000PsecStatusPortUsers | read-only | current | Bit masks to indicate what users currently use port security on this port. Where bit 0 - port security limit, bit 1 - 802.1x, bit 2 - voice VLAN. |
| 1.3.6.1.4.1.9.9.832.1.66.1.3.1.1.3 | Columncie1000PsecStatusPortLimitReached | read-only | current | TRUE if the limit is reached on the port, FALSE otherwise. |
| 1.3.6.1.4.1.9.9.832.1.66.1.3.1.1.4 | Columncie1000PsecStatusPortShutdown | read-only | current | TRUE if the port is shut down, FALSE otherwise. |
| 1.3.6.1.4.1.9.9.832.1.66.1.3.1.1.5 | Columncie1000PsecStatusPortMacCount | read-only | current | Number of MAC addresses currently assigned to this port. The number does NOT include the number of entries that are held due to a H/W failure or S/W failure. |
| 1.3.6.1.4.1.9.9.832.1.66.1.3.2 | Tablecie1000PsecStatusPortTrapsTable | not-accessible | current | This is a table of port configuration per session |
| 1.3.6.1.4.1.9.9.832.1.66.1.3.2.1 | Rowcie1000PsecStatusPortTrapsEntry | not-accessible | current | Each session has a set of parameters |
| 1.3.6.1.4.1.9.9.832.1.66.1.3.2.1.1 | Columncie1000PsecStatusPortTrapsIfIndex | accessible-for-notify | current | Logical interface number of the physical port. |
| 1.3.6.1.4.1.9.9.832.1.66.1.3.2.1.2 | Columncie1000PsecStatusPortTrapsUsers | read-only | current | Bit masks to indicate what users currently use port security on this port. Where bit 0 - port security limit, bit 1 - 802.1x, bit 2 - voice VLAN. |
| 1.3.6.1.4.1.9.9.832.1.66.1.3.2.1.3 | Columncie1000PsecStatusPortTrapsLimitReached | read-only | current | TRUE if the limit is reached on the port, FALSE otherwise. |
| 1.3.6.1.4.1.9.9.832.1.66.1.3.2.1.4 | Columncie1000PsecStatusPortTrapsShutdown | read-only | current | TRUE if the port is shut down, FALSE otherwise. |
| 1.3.6.1.4.1.9.9.832.1.66.1.3.2.1.5 | Columncie1000PsecStatusPortTrapsMacCount | read-only | current | Number of MAC addresses currently assigned to this port. The number does NOT include the number of entries that are held due to a H/W failure or S/W failure. |
| 1.3.6.1.4.1.9.9.832.1.66.1.4 | Nodecie1000PsecControl | |||
| 1.3.6.1.4.1.9.9.832.1.66.1.4.1 | Tablecie1000PsecControlPortReopenTable | not-accessible | current | This is a table to re-open port and move it to ready state, if it was being disabled after limit was reached. |
| 1.3.6.1.4.1.9.9.832.1.66.1.4.1.1 | Rowcie1000PsecControlPortReopenEntry | not-accessible | current | Each session has a set of parameters |
| 1.3.6.1.4.1.9.9.832.1.66.1.4.1.1.1 | Columncie1000PsecControlPortReopenIfIndex | accessible-for-notify | current | Logical interface number of the physical port. |
| 1.3.6.1.4.1.9.9.832.1.66.1.4.1.1.2 | Columncie1000PsecControlPortReopenPortReOpen | read-write | current | Set to true to reopen after it is shutdown |
| 1.3.6.1.4.1.9.9.832.1.66.1.5 | Nodecie1000PsecStatistics | |||
| 1.3.6.1.4.1.9.9.832.1.66.1.5.1 | Tablecie1000PsecStatisticsPortTable | not-accessible | current | This is a table of port statistics per session |
| 1.3.6.1.4.1.9.9.832.1.66.1.5.1.1 | Rowcie1000PsecStatisticsPortEntry | not-accessible | current | Each session has a set of parameters |
| 1.3.6.1.4.1.9.9.832.1.66.1.5.1.1.1 | Columncie1000PsecStatisticsPortIfIndex | accessible-for-notify | current | Logical interface number of the physical port. |
| 1.3.6.1.4.1.9.9.832.1.66.1.5.1.1.5 | Columncie1000PsecStatisticsPortAgeOrHold | read-only | current | Down-counter used in block and ageing process. |
| 1.3.6.1.4.1.9.9.832.1.66.1.5.1.1.6 | Columncie1000PsecStatisticsPortCreationTime | read-only | current | Time when this entry was orignally added. |
| 1.3.6.1.4.1.9.9.832.1.66.1.5.1.1.7 | Columncie1000PsecStatisticsPortState | read-only | current | Current State of a entry, expected state can be either FORWARDING or BLOCKED. |
| 1.3.6.1.4.1.9.9.832.1.66.1.5.1.1.8 | Columncie1000PsecStatisticsPortMacId | read-only | current | The MAC address that this is all about. |
| 1.3.6.1.4.1.9.9.832.1.66.1.5.1.1.9 | Columncie1000PsecStatisticsPortVlanId | read-only | current | The VID that this is all about. |
| 1.3.6.1.4.1.9.9.832.1.66.1.6 | Nodecie1000PsecTrap | |||
| 1.3.6.1.4.1.9.9.832.1.66.1.6.1 | Notificationcie1000PsecTrapLimitExceeded | current | This trap signals that a row has been added. The index(es) and value(s) of the row is included in the trap. | |
| 1.3.6.1.4.1.9.9.832.1.66.1.6.2 | Notificationcie1000PsecTrapMod | current | This trap signals that one or more of the objects included in the trap has been updated. | |
| 1.3.6.1.4.1.9.9.832.1.66.1.6.3 | Notificationcie1000PsecTrapLimitRecovered | current | This trap signals that a row has been deleted. The index(es) of the row is included in the trap. | |
| 1.3.6.1.4.1.9.9.832.1.66.2 | Nodecie1000PsecMibConformance | |||
| 1.3.6.1.4.1.9.9.832.1.66.2.1 | Nodecie1000PsecMibCompliances | |||
| 1.3.6.1.4.1.9.9.832.1.66.2.1.1 | Compliancecie1000PsecMibCompliance | current | The compliance statement for the implementation. | |
| 1.3.6.1.4.1.9.9.832.1.66.2.2 | Nodecie1000PsecMibGroups | |||
| 1.3.6.1.4.1.9.9.832.1.66.2.2.1 | Groupcie1000PsecConfigGlobalsInfoGroup | current | A collection of objects. | |
| 1.3.6.1.4.1.9.9.832.1.66.2.2.2 | Groupcie1000PsecConfigPortTableInfoGroup | current | A collection of objects. | |
| 1.3.6.1.4.1.9.9.832.1.66.2.2.3 | Groupcie1000PsecStatusPortTableInfoGroup | current | A collection of objects. | |
| 1.3.6.1.4.1.9.9.832.1.66.2.2.4 | Groupcie1000PsecStatusPortTrapsInfoGroup | current | A collection of objects. | |
| 1.3.6.1.4.1.9.9.832.1.66.2.2.5 | Groupcie1000PsecControlPortReopenTableInfoGroup | current | A collection of objects. | |
| 1.3.6.1.4.1.9.9.832.1.66.2.2.6 | Groupcie1000PsecStatisticsPortTableInfoGroup | current | A collection of objects. | |
| 1.3.6.1.4.1.9.9.832.1.66.2.2.7 | Groupcie1000PsecTrapLimitExceededInfoGroup | current | Information group containing a trap. | |
| 1.3.6.1.4.1.9.9.832.1.66.2.2.8 | Groupcie1000PsecTrapModInfoGroup | current | Information group containing a trap. | |
| 1.3.6.1.4.1.9.9.832.1.66.2.2.9 | Groupcie1000PsecTrapLimitRecoveredInfoGroup | current | Information group containing a trap. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CIE1000PsecLimitActionType | INTEGER { none(0), trap(1), shutdown(2), trapShutdown(3) } | current | This enumeration defines the Action type in psec function. |
| CIE1000PsecStateType | INTEGER { forwarding(0), blocked(1) } | current | This enumeration defines the state of Psec config. |