CIE1000-VLAN-MIB
87 objects
Private MIB for VLAN.
Imported Objects
| CIE1000-TC | CIE1000DisplayString CIE1000EtherType CIE1000InterfaceIndex CIE1000PortList CIE1000RowEditorState CIE1000Unsigned16 CIE1000Vlan CIE1000VlanListQuarter |
| CISCO-IE1000-MIB | cie1000SwitchMgmt |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.832.1.13 | Identitycie1000VlanMib | Private MIB for VLAN. | ||
| 1.3.6.1.4.1.9.9.832.1.13.1 | Nodecie1000VlanMibObjects | |||
| 1.3.6.1.4.1.9.9.832.1.13.1.1 | Nodecie1000VlanCapabilities | |||
| 1.3.6.1.4.1.9.9.832.1.13.1.1.1 | Scalarcie1000VlanCapabilitiesVlanIdMin | read-only | current | The minimum VLAN ID that can be configured on the device. |
| 1.3.6.1.4.1.9.9.832.1.13.1.1.2 | Scalarcie1000VlanCapabilitiesVlanIdMax | read-only | current | The maximum VLAN ID that can be configured on the device. |
| 1.3.6.1.4.1.9.9.832.1.13.1.1.3 | Scalarcie1000VlanCapabilitiesFidCnt | read-only | current | The number of Shared VLAN Learning (SVL) Filter IDs (FIDs) supported by this device. 0 if SVL is not supported. |
| 1.3.6.1.4.1.9.9.832.1.13.1.2 | Nodecie1000VlanConfig | |||
| 1.3.6.1.4.1.9.9.832.1.13.1.2.1 | Nodecie1000VlanConfigGlobals | |||
| 1.3.6.1.4.1.9.9.832.1.13.1.2.1.1 | Nodecie1000VlanConfigGlobalsMain | |||
| 1.3.6.1.4.1.9.9.832.1.13.1.2.1.1.1 | Scalarcie1000VlanConfigGlobalsMainCustomSPortEtherType | read-write | current | TPID (EtherType) for ports marked as Custom-S tag aware. |
| 1.3.6.1.4.1.9.9.832.1.13.1.2.1.1.2 | Scalarcie1000VlanConfigGlobalsMainAccessVlans0To1K | read-write | current | First quarter of bit-array indicating the enabled access VLANs. |
| 1.3.6.1.4.1.9.9.832.1.13.1.2.1.1.3 | Scalarcie1000VlanConfigGlobalsMainAccessVlans1KTo2K | read-write | current | Second quarter of bit-array indicating the enabled access VLANs. |
| 1.3.6.1.4.1.9.9.832.1.13.1.2.1.1.4 | Scalarcie1000VlanConfigGlobalsMainAccessVlans2KTo3K | read-write | current | Third quarter of bit-array indicating the enabled access VLANs. |
| 1.3.6.1.4.1.9.9.832.1.13.1.2.1.1.5 | Scalarcie1000VlanConfigGlobalsMainAccessVlans3KTo4K | read-write | current | Last quarter of bit-array indicating the enabled access VLANs. |
| 1.3.6.1.4.1.9.9.832.1.13.1.2.1.2 | Tablecie1000VlanConfigGlobalsNameTable | not-accessible | current | Table of VLAN names. |
| 1.3.6.1.4.1.9.9.832.1.13.1.2.1.2.1 | Rowcie1000VlanConfigGlobalsNameEntry | not-accessible | current | Each row contains the name of a given VLAN. |
| 1.3.6.1.4.1.9.9.832.1.13.1.2.1.2.1.1 | Columncie1000VlanConfigGlobalsNameVlanId | accessible-for-notify | current | VLAN ID. Valid range is 1 - 4095. |
| 1.3.6.1.4.1.9.9.832.1.13.1.2.1.2.1.2 | Columncie1000VlanConfigGlobalsNameName | read-write | current | VLAN Name. Default for VLAN 1 is 'default'. Default for any other VLAN is 'VLANxxxx', where 'xxxx' is a decimal representation of the VLAN ID with leading zero… |
| 1.3.6.1.4.1.9.9.832.1.13.1.2.2 | Nodecie1000VlanConfigInterfaces | |||
| 1.3.6.1.4.1.9.9.832.1.13.1.2.2.1 | Tablecie1000VlanConfigInterfacesTable | not-accessible | current | Table of per-port configuration. |
| 1.3.6.1.4.1.9.9.832.1.13.1.2.2.1.1 | Rowcie1000VlanConfigInterfacesEntry | not-accessible | current | Each row contains the VLAN configuration for a port interface. |
| 1.3.6.1.4.1.9.9.832.1.13.1.2.2.1.1.1 | Columncie1000VlanConfigInterfacesIfIndex | accessible-for-notify | current | Logical interface index. |
| 1.3.6.1.4.1.9.9.832.1.13.1.2.2.1.1.2 | Columncie1000VlanConfigInterfacesMode | read-write | current | VLAN mode of the port. |
| 1.3.6.1.4.1.9.9.832.1.13.1.2.2.1.1.3 | Columncie1000VlanConfigInterfacesAccessVlan | read-write | current | The port VLAN ID the port will be assigned when Mode is Access. |
| 1.3.6.1.4.1.9.9.832.1.13.1.2.2.1.1.4 | Columncie1000VlanConfigInterfacesTrunkNativeVlan | read-write | current | The port VLAN ID the port will be assigned when Mode is trunk. |
| 1.3.6.1.4.1.9.9.832.1.13.1.2.2.1.1.5 | Columncie1000VlanConfigInterfacesTrunkTagNativeVlan | read-write | current | Controls whether frames classified to TrunkNativeVlan get tagged on egress. Used when Mode is trunk. |
| 1.3.6.1.4.1.9.9.832.1.13.1.2.2.1.1.6 | Columncie1000VlanConfigInterfacesTrunkVlans0KTo1K | read-write | current | First quarter of bit-array indicating whether the port is member of a VLAN ('1') or not ('0'). Used when Mode is trunk. |
| 1.3.6.1.4.1.9.9.832.1.13.1.2.2.1.1.7 | Columncie1000VlanConfigInterfacesTrunkVlans1KTo2K | read-write | current | Second quarter of bit-array indicating whether the port is member of a VLAN ('1') or not ('0'). Used when Mode is trunk. |
| 1.3.6.1.4.1.9.9.832.1.13.1.2.2.1.1.8 | Columncie1000VlanConfigInterfacesTrunkVlans2KTo3K | read-write | current | Third quarter of bit-array indicating whether the port is member of a VLAN ('1') or not ('0'). Used when Mode is trunk. |
| 1.3.6.1.4.1.9.9.832.1.13.1.2.2.1.1.9 | Columncie1000VlanConfigInterfacesTrunkVlans3KTo4K | read-write | current | Last quarter of bit-array indicating whether the port is member of a VLAN ('1') or not ('0'). Used when Mode is trunk. |
| 1.3.6.1.4.1.9.9.832.1.13.1.2.2.1.1.10 | Columncie1000VlanConfigInterfacesHybridNativeVlan | read-write | current | The port VLAN ID the port will be assigned when Mode is hybrid. |
| 1.3.6.1.4.1.9.9.832.1.13.1.2.2.1.1.11 | Columncie1000VlanConfigInterfacesHybridPortType | read-write | current | Controls awareness and whether it reacts to C-tags, S-tags, Custom-S-tags. Used when Mode is hybrid. |
| 1.3.6.1.4.1.9.9.832.1.13.1.2.2.1.1.12 | Columncie1000VlanConfigInterfacesHybridIngressFiltering | read-write | current | Controls whether frames classified to a certain VLAN ID get discarded (true) or not (false) if the port is not member of the VLAN ID. Used when Mode is hybrid. |
| 1.3.6.1.4.1.9.9.832.1.13.1.2.2.1.1.13 | Columncie1000VlanConfigInterfacesHybridIngressAcceptance | read-write | current | Controls whether frames are accepted on ingress depending on VLAN tag in frame. Used when Mode is hybrid. |
| 1.3.6.1.4.1.9.9.832.1.13.1.2.2.1.1.14 | Columncie1000VlanConfigInterfacesHybridEgressTagging | read-write | current | Controls tagging of frames on egress. tagThis(1) is not allowed. Used when Mode is hybrid. |
| 1.3.6.1.4.1.9.9.832.1.13.1.2.2.1.1.15 | Columncie1000VlanConfigInterfacesHybridVlans0KTo1K | read-write | current | First quarter of bit-array indicating whether the port is member of a VLAN ('1') or not ('0'). Used when Mode is hybrid. |
| 1.3.6.1.4.1.9.9.832.1.13.1.2.2.1.1.16 | Columncie1000VlanConfigInterfacesHybridVlans1KTo2K | read-write | current | Second quarter of bit-array indicating whether the port is member of a VLAN ('1') or not ('0'). Used when Mode is hybrid. |
| 1.3.6.1.4.1.9.9.832.1.13.1.2.2.1.1.17 | Columncie1000VlanConfigInterfacesHybridVlans2KTo3K | read-write | current | Third quarter of bit-array indicating whether the port is member of a VLAN ('1') or not ('0'). Used when Mode is hybrid. |
| 1.3.6.1.4.1.9.9.832.1.13.1.2.2.1.1.18 | Columncie1000VlanConfigInterfacesHybridVlans3KTo4K | read-write | current | Last quarter of bit-array indicating whether the port is member of a VLAN ('1') or not ('0'). Used when Mode is hybrid. |
| 1.3.6.1.4.1.9.9.832.1.13.1.2.2.1.1.19 | Columncie1000VlanConfigInterfacesForbiddenVlans0KTo1K | read-write | current | First quarter of bit-array indicating whether the port can ever become a member of a VLAN ('0') or not ('1'). Used in all modes. |
| 1.3.6.1.4.1.9.9.832.1.13.1.2.2.1.1.20 | Columncie1000VlanConfigInterfacesForbiddenVlans1KTo2K | read-write | current | Second quarter of bit-array indicating whether the port can ever become a member of a VLAN ('0') or not ('1'). Used in all modes. |
| 1.3.6.1.4.1.9.9.832.1.13.1.2.2.1.1.21 | Columncie1000VlanConfigInterfacesForbiddenVlans2KTo3K | read-write | current | Third quarter of bit-array indicating whether the port can ever become a member of a VLAN ('0') or not ('1'). Used in all modes. |
| 1.3.6.1.4.1.9.9.832.1.13.1.2.2.1.1.22 | Columncie1000VlanConfigInterfacesForbiddenVlans3KTo4K | read-write | current | Last quarter of bit-array indicating whether the port can ever become a member of a VLAN ('0') or not ('1'). Used in all modes. |
| 1.3.6.1.4.1.9.9.832.1.13.1.2.2.2 | Tablecie1000VlanConfigInterfacesSvlTable | not-accessible | current | Shared VLAN Learning (SVL) allows for having one or more VLAN IDs map to the same Filter ID (FID). For a given set of VLANs, if an individual MAC address is le… |
| 1.3.6.1.4.1.9.9.832.1.13.1.2.2.2.1 | Rowcie1000VlanConfigInterfacesSvlEntry | not-accessible | current | The table is indexed by VLAN ID |
| 1.3.6.1.4.1.9.9.832.1.13.1.2.2.2.1.1 | Columncie1000VlanConfigInterfacesSvlVlanId | accessible-for-notify | current | VLAN ID. Valid range is 1 - 4095. |
| 1.3.6.1.4.1.9.9.832.1.13.1.2.2.2.1.2 | Columncie1000VlanConfigInterfacesSvlFilterId | read-write | current | Filter ID (FID) used in Shared VLAN Learning. Zero or more VLANs may map into the same FID. |
| 1.3.6.1.4.1.9.9.832.1.13.1.2.2.2.1.100 | Columncie1000VlanConfigInterfacesSvlAction | read-write | current | Action |
| 1.3.6.1.4.1.9.9.832.1.13.1.2.2.3 | Nodecie1000VlanConfigInterfacesSvlTableRowEditor | |||
| 1.3.6.1.4.1.9.9.832.1.13.1.2.2.3.1 | Scalarcie1000VlanConfigInterfacesSvlTableRowEditorVlanId | read-write | current | VLAN ID. Valid range is 1 - 4095. |
| 1.3.6.1.4.1.9.9.832.1.13.1.2.2.3.2 | Scalarcie1000VlanConfigInterfacesSvlTableRowEditorFilterId | read-write | current | Filter ID (FID) used in Shared VLAN Learning. Zero or more VLANs may map into the same FID. |
| 1.3.6.1.4.1.9.9.832.1.13.1.2.2.3.100 | Scalarcie1000VlanConfigInterfacesSvlTableRowEditorAction | read-write | current | Action |
| 1.3.6.1.4.1.9.9.832.1.13.1.3 | Nodecie1000VlanStatus | |||
| 1.3.6.1.4.1.9.9.832.1.13.1.3.1 | Nodecie1000VlanStatusInterfaces | |||
| 1.3.6.1.4.1.9.9.832.1.13.1.3.1.1 | Tablecie1000VlanStatusInterfacesTable | not-accessible | current | Table of per-interface (port) status. |
| 1.3.6.1.4.1.9.9.832.1.13.1.3.1.1.1 | Rowcie1000VlanStatusInterfacesEntry | not-accessible | current | Each row contains the VLAN configuration for a port interface for a given VLAN user. |
| 1.3.6.1.4.1.9.9.832.1.13.1.3.1.1.1.1 | Columncie1000VlanStatusInterfacesIfIndex | accessible-for-notify | current | Logical interface index. |
| 1.3.6.1.4.1.9.9.832.1.13.1.3.1.1.1.2 | Columncie1000VlanStatusInterfacesVlanUser | accessible-for-notify | current | VLAN user. |
| 1.3.6.1.4.1.9.9.832.1.13.1.3.1.1.1.3 | Columncie1000VlanStatusInterfacesPvid | read-only | current | Port VLAN ID set by this user. |
| 1.3.6.1.4.1.9.9.832.1.13.1.3.1.1.1.4 | Columncie1000VlanStatusInterfacesUvid | read-only | current | Untagged VLAN ID set by a user. This may only be populated by non-admin users. |
| 1.3.6.1.4.1.9.9.832.1.13.1.3.1.1.1.5 | Columncie1000VlanStatusInterfacesPortType | read-only | current | VLAN Awareness and tag reaction set by this user. |
| 1.3.6.1.4.1.9.9.832.1.13.1.3.1.1.1.6 | Columncie1000VlanStatusInterfacesIngressFiltering | read-only | current | Ingress filtering enabled or disabled by this user. |
| 1.3.6.1.4.1.9.9.832.1.13.1.3.1.1.1.7 | Columncie1000VlanStatusInterfacesIngressAcceptance | read-only | current | VLAN tagging accepted upon ingress configured by this user. |
| 1.3.6.1.4.1.9.9.832.1.13.1.3.1.1.1.8 | Columncie1000VlanStatusInterfacesEgressTagging | read-only | current | Egress tagging configured by this user. |
| 1.3.6.1.4.1.9.9.832.1.13.1.3.2 | Nodecie1000VlanStatusMemberships | |||
| 1.3.6.1.4.1.9.9.832.1.13.1.3.2.1 | Tablecie1000VlanStatusMembershipsVlanTable | not-accessible | current | Table of per-VLAN, per-VLAN user port memberships. |
| 1.3.6.1.4.1.9.9.832.1.13.1.3.2.1.1 | Rowcie1000VlanStatusMembershipsVlanEntry | not-accessible | current | Each row contains a port list of VLAN memberships for a given VLAN and VLAN user.The table is sparsely populated, so if a VLAN user doesn't contribute, the row… |
| 1.3.6.1.4.1.9.9.832.1.13.1.3.2.1.1.1 | Columncie1000VlanStatusMembershipsVlanVlanId | accessible-for-notify | current | VLAN ID. Valid range is 1 - 4095. |
| 1.3.6.1.4.1.9.9.832.1.13.1.3.2.1.1.2 | Columncie1000VlanStatusMembershipsVlanVlanUser | accessible-for-notify | current | VLAN user. |
| 1.3.6.1.4.1.9.9.832.1.13.1.3.2.1.1.3 | Columncie1000VlanStatusMembershipsVlanPortList | read-only | current | Port list. |
| 1.3.6.1.4.1.9.9.832.1.13.2 | Nodecie1000VlanMibConformance | |||
| 1.3.6.1.4.1.9.9.832.1.13.2.1 | Nodecie1000VlanMibCompliances | |||
| 1.3.6.1.4.1.9.9.832.1.13.2.1.1 | Compliancecie1000VlanMibCompliance | current | The compliance statement for the implementation. | |
| 1.3.6.1.4.1.9.9.832.1.13.2.2 | Nodecie1000VlanMibGroups | |||
| 1.3.6.1.4.1.9.9.832.1.13.2.2.1 | Groupcie1000VlanCapabilitiesInfoGroup | current | A collection of objects. | |
| 1.3.6.1.4.1.9.9.832.1.13.2.2.2 | Groupcie1000VlanConfigGlobalsMainInfoGroup | current | A collection of objects. | |
| 1.3.6.1.4.1.9.9.832.1.13.2.2.3 | Groupcie1000VlanConfigGlobalsNameTableInfoGroup | current | A collection of objects. | |
| 1.3.6.1.4.1.9.9.832.1.13.2.2.4 | Groupcie1000VlanConfigInterfacesTableInfoGroup | current | A collection of objects. | |
| 1.3.6.1.4.1.9.9.832.1.13.2.2.5 | Groupcie1000VlanConfigInterfacesSvlTableInfoGroup | current | A collection of objects. | |
| 1.3.6.1.4.1.9.9.832.1.13.2.2.6 | Groupcie1000VlanConfigInterfacesSvlTableRowEditorInfoGroup | current | A collection of objects. | |
| 1.3.6.1.4.1.9.9.832.1.13.2.2.7 | Groupcie1000VlanStatusInterfacesTableInfoGroup | current | A collection of objects. | |
| 1.3.6.1.4.1.9.9.832.1.13.2.2.8 | Groupcie1000VlanStatusMembershipsVlanTableInfoGroup | current | A collection of objects. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CIE1000VlanEgressTagging | INTEGER { untagThis(0), tagThis(1), tagAll(2), untagAll(3) } | current | An integer that indicates how egress tagging occurs. |
| CIE1000VlanIngressAcceptance | INTEGER { all(0), tagged(1), untagged(2) } | current | An integer that indicates the type of frames that are not discarded on ingress w.r.t. VLAN tagging. |
| CIE1000VlanPortMode | INTEGER { access(0), trunk(1), hybrid(2) } | current | Determines the underlying port mode. Access ports are only members of one VLAN, the AccessVlan. Trunk ports are by default members of all VLANs, which can be limited with TrunkVlans. Hybrid ports allow for changing all … |
| CIE1000VlanPortType | INTEGER { unaware(0), c(1), s(2), sCustom(3) } | current | An integer that indicates if a port is VLAN aware, and if so, to which EtherType it is sensitive. |
| CIE1000VlanUserType | INTEGER { combined(0), admin(1), dot1x(3), mvrp(4), gvrp(5), mvr(6), voiceVlan(7), mstp(8), erps(9), mep(10), evc(11), vcl(12), rmirror(13) } | current | An integer that indicates the VLAN user type. A value of 'combined' indicates the VLAN settings as programmed to hardware. A value of 'admin' indicates the VLAN settings as programmed by the administrative user, and any… |