CISCO-802-TAP-MIB
20 objects
This module manages Cisco's intercept feature for 802 (layer 2) streams. This MIB is used along with CISCO-TAP2-MIB to intercept 802 traffic. CISCO-TAP2-MIB along with specific filter MIBs like this MIB replace CISCO-TAP-MIB. To create an 802 intercept, an entry c802tapStreamEntry is created which contains the filter details. An entry cTap2StreamEntry of CISCO-TAP2-MIB is created which is the common stream information for all kinds of intercepts and type of the specific stream is set to mac in this entry.
Imported Objects
| CISCO-SMI | ciscoMgmt |
| CISCO-TAP2-MIB | cTap2MediationContentId cTap2StreamIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | MacAddress RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.395 | Identitycisco802TapMIB | This module manages Cisco's intercept feature for 802 (layer 2) streams. This MIB is used along with CISCO-TAP2-MIB to intercept 802 traffic. CISCO-TAP2-MIB al… | ||
| 1.3.6.1.4.1.9.9.395.0 | Nodecisco802TapMIBNotifs | |||
| 1.3.6.1.4.1.9.9.395.1 | Nodecisco802TapMIBObjects | |||
| 1.3.6.1.4.1.9.9.395.1.1 | Nodec802tapStreamEncodePacket | |||
| 1.3.6.1.4.1.9.9.395.1.1.1 | Scalarc802tapStreamCapabilities | read-only | current | This object displays what types of intercept streams can be configured on this type of device. This may be dependent on hardware capabilities, software capabil… |
| 1.3.6.1.4.1.9.9.395.1.1.2 | Tablec802tapStreamTable | not-accessible | current | The Intercept Stream 802 Table lists the IEEE 802 data streams to be intercepted. The same data stream may be required by multiple taps, and one might assume t… |
| 1.3.6.1.4.1.9.9.395.1.1.2.1 | Rowc802tapStreamEntry | not-accessible | current | A stream entry indicates a single data stream to be intercepted to a Mediation Device. Many selected data streams may go to the same application interface, and… |
| 1.3.6.1.4.1.9.9.395.1.1.2.1.1 | Columnc802tapStreamFields | read-create | current | This object displays what attributes must be tested to identify traffic which requires interception. The packet matches if all flagged fields match. interface:… |
| 1.3.6.1.4.1.9.9.395.1.1.2.1.2 | Columnc802tapStreamInterface | read-create | current | The ifIndex value of the interface over which traffic to be intercepted is received or transmitted. The interface may be physical or virtual. If this is the on… |
| 1.3.6.1.4.1.9.9.395.1.1.2.1.3 | Columnc802tapStreamDestinationAddress | read-create | current | The Destination address used in packet selection. |
| 1.3.6.1.4.1.9.9.395.1.1.2.1.4 | Columnc802tapStreamSourceAddress | read-create | current | The Source Address used in packet selection. |
| 1.3.6.1.4.1.9.9.395.1.1.2.1.5 | Columnc802tapStreamEthernetPid | read-create | current | The value of the Ethernet Protocol Identifier, which may be found on Ethernet traffic or IEEE 802.2 SNAP traffic. |
| 1.3.6.1.4.1.9.9.395.1.1.2.1.6 | Columnc802tapStreamDestinationLlcSap | read-create | current | The value of the IEEE 802.2 Destination SAP. |
| 1.3.6.1.4.1.9.9.395.1.1.2.1.7 | Columnc802tapStreamSourceLlcSap | read-create | current | The value of the IEEE 802.2 Source SAP. |
| 1.3.6.1.4.1.9.9.395.1.1.2.1.8 | Columnc802tapStreamStatus | read-create | current | The status of this conceptual row. This object manages creation, modification, and deletion of rows in this table. When any rows must be changed, c802tapStream… |
| 1.3.6.1.4.1.9.9.395.2 | Nodecisco802TapMIBConform | |||
| 1.3.6.1.4.1.9.9.395.2.1 | Nodecisco802TapMIBCompliances | |||
| 1.3.6.1.4.1.9.9.395.2.1.1 | Compliancecisco802TapMIBCompliance | current | The compliance statement for entities which implement the Cisco Intercept MIB for 802 streams. | |
| 1.3.6.1.4.1.9.9.395.2.2 | Nodecisco802TapMIBGroups | |||
| 1.3.6.1.4.1.9.9.395.2.2.1 | Groupcisco802TapStreamGroup | current | These objects are necessary for a description of IEEE 802 packets to select for interception. |