CISCO-APS-EXT-MIB
56 objects
The Cisco APS Extension MIB extends the Cisco APS MIB in order to a) support path APS architectures and b) support interfaces other than SONET (e.g. Cisco CDL). For configuration and monitoring of APS for CDL interfaces, all objects and notifications in the Cisco APS MIB apply, with the exception of the following: - cApsStatusK1K2Rcv and cApsStatusK1K2Trans in cApsStatusEntry, - cApsConfigSdBerThreshold and cApsConfigSfBerThreshold in cApsConfigEntry, - cApsChanStatusSignalDegrades and cApsChanStatusSignalFailures in cApsChanStatusEntry, - cApsStatusFEPLFs in cApsStatusEntry, - cApsEventFEPLF. Whenever the description of an object in the Cisco APS MIB refers to a SONET LTE interface, this applies to CDL terminating interfaces as well. CDL interfaces have ifType values other than 'sonet'. For SONET path APS support, whenever the description of an object in the Cisco APS MIB refers to a SONET LTE interface, this applies to SONET PTE interfaces as well. SONET PTE interfaces have ifType values 'sonetPath'.
Imported Objects
| CISCO-APS-MIB | cApsChanConfigEntry cApsChanStatusEntry cApsConfigEntry CApsK1K2 cApsStatusEntry |
| CISCO-SMI | ciscoExperiment |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.10.72 | IdentitycApsExtMIB | The Cisco APS Extension MIB extends the Cisco APS MIB in order to a) support path APS architectures and b) support interfaces other than SONET (e.g. Cisco CDL)… | ||
| 1.3.6.1.4.1.9.10.72.1 | NodecApsExtMIBObjects | |||
| 1.3.6.1.4.1.9.10.72.1.1 | ScalarcApsNotifiesEnable | read-write | current | When this object is set to 'true', it allows the generation of the APS-related notifications defined in the CISCO-APS-MIB. When this object is set to 'false', … |
| 1.3.6.1.4.1.9.10.72.1.2 | TablecApsConfigExtTable | not-accessible | current | This table augments the cApsConfigTable. |
| 1.3.6.1.4.1.9.10.72.1.2.1 | RowcApsConfigExtEntry | not-accessible | current | A conceptual row in the cApsConfigExtTable. |
| 1.3.6.1.4.1.9.10.72.1.2.1.1 | ColumncApsConfigSpan | read-create | current | The span (hopByHop or endToEnd) for the APS group. hopByHop This refers to linear APS, e.g. linear SONET APS, or hopByHop CDL APS. In a DWDM system, an APS cha… |
| 1.3.6.1.4.1.9.10.72.1.2.1.2 | ColumncApsConfigYcable | read-create | current | The Y-cable configuration for the APS group associated with user channels. noYcable The APS channels in the APS group are not connected to an external Y-cable.… |
| 1.3.6.1.4.1.9.10.72.1.2.1.3 | ColumncApsConfigMinSearchUpInterval | read-create | current | This object is instantiated only when the standby interface is not monitored. If both interfaces go down and the standby interface is not monitored, successive… |
| 1.3.6.1.4.1.9.10.72.1.2.1.4 | ColumncApsConfigMaxSearchUpInterval | read-create | current | This object is instantiated only when the standby interface is not monitored. If both interfaces go down and the standby interface is not monitored, successive… |
| 1.3.6.1.4.1.9.10.72.1.2.1.5 | ColumncApsConfigSwitchoverEnableInterval | read-create | current | This object specifies the value of the timer to control the minimum interval between switchovers. After a switchover, APS is re-enabled only after this amount … |
| 1.3.6.1.4.1.9.10.72.1.2.1.6 | ColumncApsConfigMessageTransport | read-create | current | This object specifies the type of transport configured for exchange of APS protocol messages. The type of transport currently being used is indicated in the cA… |
| 1.3.6.1.4.1.9.10.72.1.2.1.7 | ColumncApsConfigMessageHolddown | read-create | current | The value specified in this object applies when the value of cApsStatusMessageTransport is 'dcc', 'ip', or 'osc'. APS messages are exchanged between systems to… |
| 1.3.6.1.4.1.9.10.72.1.2.1.8 | ColumncApsConfigMessageHolddownCount | read-create | current | The value specified in this object applies when the value of cApsStatusMessageTransport is 'dcc', 'ip', or 'osc'. The maximum number of APS messages that can b… |
| 1.3.6.1.4.1.9.10.72.1.2.1.9 | ColumncApsConfigMessageMaxInterval | read-create | current | The value specified in this object applies when the value of cApsStatusMessageTransport is 'dcc', 'ip', or 'osc'. An APS message is sent unconditionally, whene… |
| 1.3.6.1.4.1.9.10.72.1.2.1.10 | ColumncApsConfigFarEndGroupName | read-create | current | The value specified in this object applies when the value of cApsStatusMessageTransport is 'dcc', 'ip', or 'osc'. APS messages, used to support bidirectional o… |
| 1.3.6.1.4.1.9.10.72.1.2.1.11 | ColumncApsConfigFarEndIpAddressType | read-create | current | This object can be set only when the value of cApsConfigMessageTransport is 'ip'. This object specifies the type of IP address defined in cApsConfigFarEndIpAdd… |
| 1.3.6.1.4.1.9.10.72.1.2.1.12 | ColumncApsConfigFarEndIpAddress | read-create | current | This object can be set only when the value of cApsConfigMessageTransport is 'ip'. This object specifies the IP address of the far end, which is used as the des… |
| 1.3.6.1.4.1.9.10.72.1.3 | TablecApsStatusExtTable | not-accessible | current | This table augments the cApsStatusTable. |
| 1.3.6.1.4.1.9.10.72.1.3.1 | RowcApsStatusExtEntry | not-accessible | current | A conceptual row in the cApsStatusExtTable. |
| 1.3.6.1.4.1.9.10.72.1.3.1.1 | ColumncApsStatusCdlApsBytesRcv | read-only | current | The current value of the APS bytes received on the protection channel. This object applies only to CDL interfaces. This is equivalent to cApsStatusK1K2Rcv for … |
| 1.3.6.1.4.1.9.10.72.1.3.1.2 | ColumncApsStatusCdlApsBytesTrans | read-only | current | The current value of the APS bytes transmitted on the protection channel. This object applies only to CDL interfaces. This is equivalent to cApsStatusK1K2Trans… |
| 1.3.6.1.4.1.9.10.72.1.3.1.3 | ColumncApsStatusMessageTransport | read-only | current | This object specifies the type of transport currently being used for exchange of APS protocol messages. The value of this object is the same as the value speci… |
| 1.3.6.1.4.1.9.10.72.1.4 | TablecApsChanStatusExtTable | not-accessible | current | This table augments the cApsChanStatusTable. |
| 1.3.6.1.4.1.9.10.72.1.4.1 | RowcApsChanStatusExtEntry | not-accessible | current | A conceptual row in the cApsChanStatusExtTable. |
| 1.3.6.1.4.1.9.10.72.1.4.1.1 | ColumncApsChanStatusExtRequest | read-only | current | The highest priority local request for a channel in an APS group. This object uses only the 'Type of Request' part (bits 1-4) of the K1 byte. |
| 1.3.6.1.4.1.9.10.72.1.5 | TablecApsChanConfigExtTable | not-accessible | current | This table augments the cApsChanConfigTable. |
| 1.3.6.1.4.1.9.10.72.1.5.1 | RowcApsChanConfigExtEntry | not-accessible | current | A conceptual row in the cApsChanConfigExtTable. |
| 1.3.6.1.4.1.9.10.72.1.5.1.1 | ColumncApsChanConfigReflectorMode | read-only | current | Indicates whether the channel is in reflector mode or not. Reflector mode establishes a communication channel between the local PTE and the remote PTE at the o… |
| 1.3.6.1.4.1.9.10.72.1.6 | TablecApsChanAssociationTable | not-accessible | current | This table lists the configured IP address of the protect/working interfaces. |
| 1.3.6.1.4.1.9.10.72.1.6.1 | RowcApsChanAssociationEntry | not-accessible | current | A conceptual row in cApsChanAssociationTable. |
| 1.3.6.1.4.1.9.10.72.1.6.1.1 | ColumncApsChanAssociationGroupName | not-accessible | current | A textual name for the APS group which this channel is included in. |
| 1.3.6.1.4.1.9.10.72.1.6.1.2 | ColumncApsChanAssociationNumber | not-accessible | current | This field is set to a unique working/protection channel number within an APS group. The value 0 indicates the null channel. The values 1-14 define a working c… |
| 1.3.6.1.4.1.9.10.72.1.6.1.3 | ColumncApsChanAssociationMapNumber | not-accessible | current | This field is set to the associated working/protection channel number corresponding to the field cApsChanAssociationNumber within an APS group. The value 0 ind… |
| 1.3.6.1.4.1.9.10.72.1.6.1.4 | ColumncApsChanAssociationIpAddressType | read-only | current | This object specifies the type of IP address defined in cApsChanAssociationIpAddress. |
| 1.3.6.1.4.1.9.10.72.1.6.1.5 | ColumncApsChanAssociationIpAddress | read-only | current | IP Address of the working/protection channel. If cApsChanAssociationNumber represents a working channel number, this object indicates the IP Address of the ass… |
| 1.3.6.1.4.1.9.10.72.2 | NodecApsExtMIBConformance | |||
| 1.3.6.1.4.1.9.10.72.2.1 | NodecApsExtGroups | |||
| 1.3.6.1.4.1.9.10.72.2.1.1 | GroupcApsNotifiesEnableGroup | current | A managed object that controls the generation of APS-related notifications defined in the CISCO-APS-MIB. | |
| 1.3.6.1.4.1.9.10.72.2.1.2 | GroupcApsConfigPathExt | current | An augmentation to cApsConfigTable objects providing configuration information applicable to path APS architectures. | |
| 1.3.6.1.4.1.9.10.72.2.1.3 | GroupcApsConfigYcableExt | current | An augmentation to cApsConfigTable objects providing configuration information applicable to APS groups when Y cable protection is supported. | |
| 1.3.6.1.4.1.9.10.72.2.1.4 | GroupcApsConfigSearchExt | current | An augmentation to cApsConfigTable objects providing configuration information applicable to APS groups in which the standby interface is not monitored. | |
| 1.3.6.1.4.1.9.10.72.2.1.5 | GroupcApsStatusCdlExt | current | An augmentation to cApsStatusTable objects providing status information applicable to APS groups for CDL. | |
| 1.3.6.1.4.1.9.10.72.2.1.6 | GroupcApsConfigSwitchoverTimerExt | current | An augmentation to cApsConfigTable objects providing configuration information to prevent quick successive switchovers. | |
| 1.3.6.1.4.1.9.10.72.2.1.7 | GroupcApsConfigMessageExt | current | An augmentation to cApsConfigTable objects providing configuration information applicable to message transport used to exchange APS protocol messages. | |
| 1.3.6.1.4.1.9.10.72.2.1.8 | GroupcApsConfigIPExt | current | An augmentation to cApsConfigTable objects providing configuration information applicable to APS groups communicating over IP. | |
| 1.3.6.1.4.1.9.10.72.2.1.9 | GroupcApsStatusMessageExt | current | An augmentation to cApsStatusTable objects providing status information applicable to message transport used to exchange APS protocol messages. | |
| 1.3.6.1.4.1.9.10.72.2.1.10 | GroupcApsChanStatusRequestExt | current | An augmentation to cApsChanStatusTable objects providing additional status information for channels in APS groups. | |
| 1.3.6.1.4.1.9.10.72.2.1.11 | GroupcApsChanConfigExt | current | An augmentation to cApsChanConfigTable objects providing configuration information of channels in APS groups. | |
| 1.3.6.1.4.1.9.10.72.2.1.12 | GroupcApsChanAssociationGroup | current | cApsChanAssociationTable object provides for all protection/working channels, the associated working/protection channel IP address. | |
| 1.3.6.1.4.1.9.10.72.2.2 | NodecApsExtCompliances | |||
| 1.3.6.1.4.1.9.10.72.2.2.1 | CompliancecApsExtCompliance | read-only | deprecated | The compliance statement for augmented APS groups. |
| 1.3.6.1.4.1.9.10.72.2.2.2 | CompliancecApsExtCompliance2 | read-only | current | The compliance statement for augmented APS groups. |
| 1.3.6.1.4.1.9.10.72.2.2.3 | CompliancecApsExtComplianceRev1 | current | The compliance statement for augmented APS groups. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CApsChannelConfigNumber | Integer32 (0..14) | current | This Textual Convention describes an object that is set to a unique channel number within an APS group. The value 0 indicates the null channel. The values 1-14 define a working channel. |
| CApsMessageTransport | INTEGER { none(1), autoSelect(2), dcc(3), apsChannel(4), ip(5), osc(6) } | current | The type of transport used to exchange APS protocol messages. none There is no APS message exchange between the endpoints of the associated channels. autoSelect APS automatically selects a transport mechanism to send AP… |
| CdlApsBytes | OCTET STRING (SIZE (2)) | current | This Textual Convention describes an object that stores the APS protocol field used in CDL. The semantics of the CDL APS protocol field are similar to those of the SONET K1 and K2 byte APS protocol field. |