CISCO-BUS-MIB
40 objects
The MIB module for the management of LANE broadcast and unknown servers.
Imported Objects
| CISCO-SMI | ciscoMgmt |
| LAN-EMULATION-CLIENT-MIB | AtmLaneAddress |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION TimeStamp |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.40 | IdentityciscoBusMIB | The MIB module for the management of LANE broadcast and unknown servers. | ||
| 1.3.6.1.4.1.9.9.40.1 | NodeciscoBusMIBObjects | |||
| 1.3.6.1.4.1.9.9.40.1.1 | TablebusTable | not-accessible | current | A (conceptual) table representing all the instantiations of BUSs on the designated device. This table may or may not allow the creation of rows depending on wh… |
| 1.3.6.1.4.1.9.9.40.1.1.1 | RowbusEntry | not-accessible | current | An entry (conceptual row) in the busTable. |
| 1.3.6.1.4.1.9.9.40.1.1.1.1 | ColumnbusElanName | not-accessible | current | The ELAN name of the designated bridge. |
| 1.3.6.1.4.1.9.9.40.1.1.1.2 | ColumnbusIndex | not-accessible | current | A unique identifier for this particular BUS on this ELAN. This value must remain constant while the entry is in existence and during the operation of the agent… |
| 1.3.6.1.4.1.9.9.40.1.1.1.3 | ColumnbusAtmAddrSpec | read-create | current | The specified ATM address of the BUS on the interface of interest. Note that setting this object will have the side effect of reinitializing the BUS and conseq… |
| 1.3.6.1.4.1.9.9.40.1.1.1.4 | ColumnbusAtmAddrMask | read-create | current | An address mask that when used with the busAtmAddrSpec, specifies the portion of the BUS' ATM address that is desired to be configured. Note that setting this … |
| 1.3.6.1.4.1.9.9.40.1.1.1.5 | ColumnbusAtmAddrActl | read-only | current | The resultant ATM address in use by the BUS. This object is a product of the specified ATM address, mask and interaction with the switch via the ILMI. |
| 1.3.6.1.4.1.9.9.40.1.1.1.6 | ColumnbusIfIndex | read-create | current | The interface that a BUS will forward traffic over. The value specified for this object must equate to a value of ifIndex in the ifTable. The interface will be… |
| 1.3.6.1.4.1.9.9.40.1.1.1.7 | ColumnbusSubIfNum | read-create | current | Specifies the sub-interface number that the BUS will reside on. This sub-interface may be shared with a LEC or BUS of the same ELAN but is not required to do s… |
| 1.3.6.1.4.1.9.9.40.1.1.1.8 | ColumnbusUpTime | read-only | current | The value of sysUpTime when this BUS became enabled. |
| 1.3.6.1.4.1.9.9.40.1.1.1.9 | ColumnbusLanType | read-create | current | The type of legacy LAN that this LES emulates. |
| 1.3.6.1.4.1.9.9.40.1.1.1.10 | ColumnbusMaxFrm | read-create | current | The maximum frame size that the emulated LAN may accept. |
| 1.3.6.1.4.1.9.9.40.1.1.1.11 | ColumnbusMaxFrmAge | read-create | current | The maximum number of seconds a BUS will hold onto a packet for forwarding until it is dropped. Dropping a packet will result in the incrementing of the busFrm… |
| 1.3.6.1.4.1.9.9.40.1.1.1.12 | ColumnbusOutFwdOctets | read-only | current | The number of octets that this BUS has forwarded since its initialization. |
| 1.3.6.1.4.1.9.9.40.1.1.1.13 | ColumnbusOutFwdUcastFrms | read-only | current | The number of frames that the BUS has forwarded which were unicast data frames including all control frames (i.e. they were flooded from the client). |
| 1.3.6.1.4.1.9.9.40.1.1.1.14 | ColumnbusOutFwdNUcastFrms | read-only | current | The number of frames that the BUS has forwarded which were multicast frames. |
| 1.3.6.1.4.1.9.9.40.1.1.1.15 | ColumnbusFrmTimeOuts | read-only | current | The number of frames dropped by the BUS due to time out. |
| 1.3.6.1.4.1.9.9.40.1.1.1.16 | ColumnbusMultiFwdVpi | read-only | current | The virtual path identifier for the multicast forward VCC. |
| 1.3.6.1.4.1.9.9.40.1.1.1.17 | ColumnbusMultiFwdVci | read-only | current | The virtual channel identifier for the multicast forward VCC. |
| 1.3.6.1.4.1.9.9.40.1.1.1.18 | ColumnbusOperStatus | read-only | current | This object reflects the actual state of the BUS which may differ from that of the busAdminStatus object. This can occur when the interface ifOperStatus is 'do… |
| 1.3.6.1.4.1.9.9.40.1.1.1.19 | ColumnbusAdminStatus | read-create | current | The desired state of the designated BUS as prescribed by the operator. The actions of the agent will, if at all possible, eventually result in the desired stat… |
| 1.3.6.1.4.1.9.9.40.1.1.1.20 | ColumnbusStatus | read-create | current | The status of the BUS entry. This object cannot be set to active until the busIfIndex object has an appropiate value. Note that implementations that do not sup… |
| 1.3.6.1.4.1.9.9.40.1.2 | TablebusClientTable | not-accessible | current | A (conceptual) table listing the clients associated with a BUS. Note that the local or network management will not create or destroy rows in this table but may… |
| 1.3.6.1.4.1.9.9.40.1.2.1 | RowbusClientEntry | not-accessible | current | An entry (conceptual) row that denotes a client that is establishing/has established a multicast send VC to the BUS. |
| 1.3.6.1.4.1.9.9.40.1.2.1.1 | ColumnbusClientId | not-accessible | current | A unique identifier for a LEC which is establishing/ has-established a multicast send VC to the BUS. The identifier only persists for as long as the LEC is ass… |
| 1.3.6.1.4.1.9.9.40.1.2.1.2 | ColumnbusClientIfIndex | read-only | current | The interface of the uni-directional multicast send connection between the LEC and BUS. |
| 1.3.6.1.4.1.9.9.40.1.2.1.3 | ColumnbusClientMSendVpi | read-only | current | The VPI of the uni-directional multicast send connection between the LEC and BUS. |
| 1.3.6.1.4.1.9.9.40.1.2.1.4 | ColumnbusClientMSendVci | read-only | current | The VCI of the uni-directional multicast send connection between the LEC and BUS. |
| 1.3.6.1.4.1.9.9.40.1.2.1.5 | ColumnbusClientAtmAddress | read-only | current | The address associated with the LANE client on the mulicast send VCC. |
| 1.3.6.1.4.1.9.9.40.2 | NodeciscoBusMIBConformance | |||
| 1.3.6.1.4.1.9.9.40.2.1 | NodeciscoBusMIBGroups | |||
| 1.3.6.1.4.1.9.9.40.2.1.1 | GroupciscoBusGroup | current | A collection of objects for the managing of BUS operation. | |
| 1.3.6.1.4.1.9.9.40.2.1.2 | GroupciscoBusSubIfGroup | current | For those implementations that wish to tie their LE service components to an aflane_802x ifIndex. | |
| 1.3.6.1.4.1.9.9.40.2.1.3 | GroupciscoBusClientGroup | current | A collection of objects for the identification of a BUS's multicast send VCs. | |
| 1.3.6.1.4.1.9.9.40.2.2 | NodeciscoBusMIBCompliances | |||
| 1.3.6.1.4.1.9.9.40.2.2.1 | ComplianceciscoBusMIBCompliance | read-only | current | The compliance statement for SNMP entities that support Cisco's BUS MIB. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CiscoVciInteger | INTEGER (-1..65535) | current | An integer large enough to hold a VCI. In the event that VC does not exist, the value on an object with this syntax shall be -1. |
| CiscoVpiInteger | INTEGER (-1..255) | current | An integer large enough to hold a VPI. In the event that VC does not exist, the value of an object with this syntax shall be -1. |