CISCO-CALL-TRACKER-MIB
99 objects
This MIB module provides information for tracking the progress and status of a data call from the hardware layer through the application or service layer. A data call is a call setup via a signaling protocol (e.g., ISDN D Channel signaling) on the Public Switching Telephony Network to a Network Access Server in order to transfer data, either as a byte stream (e.g., terminal emulation) or in a packet format (e.g., PPP packets) from a data terminal (e.g., Personal Computer) to a data network (e.g., Internet).
Imported Objects
| CISCO-SMI | ciscoMgmt |
| DIAL-CONTROL-MIB | AbsoluteCounter32 |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.163 | IdentityciscoCallTrackerMIB | This MIB module provides information for tracking the progress and status of a data call from the hardware layer through the application or service layer. A da… | ||
| 1.3.6.1.4.1.9.9.163.1 | NodecctMIBObjects | |||
| 1.3.6.1.4.1.9.9.163.1.1 | NodecctGeneral | |||
| 1.3.6.1.4.1.9.9.163.1.1.1 | ScalarcctCallIdPrefix | read-only | current | This object may be used in conjunction with objects of type CctCallId to provide call references which are unique across system re-initializations. This value … |
| 1.3.6.1.4.1.9.9.163.1.2 | NodecctActive | |||
| 1.3.6.1.4.1.9.9.163.1.2.1 | ScalarcctActiveTableNumberEntries | read-only | current | The number of entries currently in the cctActiveTable. |
| 1.3.6.1.4.1.9.9.163.1.2.2 | ScalarcctActiveTableHighWaterMark | read-only | current | Maximum number of entries present in cctActiveTable since last system re-initialization. This corresponds to the maximum value reported by cctActiveTableNumber… |
| 1.3.6.1.4.1.9.9.163.1.2.3 | TablecctActiveTable | not-accessible | current | This table contains entries for active calls in the system. All such calls either originate or terminate at this system. The table is indexed by call ID assign… |
| 1.3.6.1.4.1.9.9.163.1.2.3.1 | RowcctActiveEntry | not-accessible | current | The information regarding a single call. Entries are created when a setup request is first received by the system. Entries are removed when a call is terminate… |
| 1.3.6.1.4.1.9.9.163.1.2.3.1.1 | ColumncctActiveCallId | not-accessible | current | Represents a Call Identifier. The call identifier is a monotonically increasing unsigned integer which uniquely identifies the call within the system. The Call… |
| 1.3.6.1.4.1.9.9.163.1.2.3.1.2 | ColumncctActiveSetupTime | read-only | current | Value of sysUpTime when the call is first made known to the system. |
| 1.3.6.1.4.1.9.9.163.1.2.3.1.3 | ColumncctActiveOrigin | read-only | current | This object indicates how the call was created. originate(1) - The call was initiated locally with the system sending the setup request. Dialout answer(2) - Th… |
| 1.3.6.1.4.1.9.9.163.1.2.3.1.4 | ColumncctActiveConnectionTime | read-only | current | Value of sysUpTime when the system connected the call. |
| 1.3.6.1.4.1.9.9.163.1.2.3.1.5 | ColumncctActivePhysicalLayerReadyTime | read-only | current | Value of sysUpTime when the physical layer for the call achieved a steady state and the call is ready for higher protocol layers to begin. In the case of modem… |
| 1.3.6.1.4.1.9.9.163.1.2.3.1.6 | ColumncctActiveServiceUpTime | read-only | current | Value of sysUpTime when the call service type identified in cctActiveServiceType was established. |
| 1.3.6.1.4.1.9.9.163.1.2.3.1.7 | ColumncctActiveServiceType | read-only | current | Service associated with the call. This is the highest level of service known to the system for the call. The service represents the encapsulation protocol laye… |
| 1.3.6.1.4.1.9.9.163.1.2.3.1.8 | ColumncctActiveUserValidationTime | read-only | current | Value of sysUpTime when the user identification associated with this call was validated. See cctActiveUserId for description of user identification. |
| 1.3.6.1.4.1.9.9.163.1.2.3.1.9 | ColumncctActiveUserId | read-only | current | The User login ID or zero length string if unavailable. |
| 1.3.6.1.4.1.9.9.163.1.2.3.1.10 | ColumncctActiveUserIpAddr | read-only | current | The IP address assigned to the cctActiveUserId for this call or 0.0.0.0 if not applicable or unavailable. |
| 1.3.6.1.4.1.9.9.163.1.2.3.1.11 | ColumncctActiveUserSubnetMask | read-only | current | The IP subnet mask assigned to the cctActiveUserId for this call or 0.0.0.0 if not applicable or unavailable. |
| 1.3.6.1.4.1.9.9.163.1.2.3.1.12 | ColumncctActiveAccountingSessionId | read-only | current | Accounting session identification assigned to this call by AAA. The session ID is sent by AAA to RADIUS as the Acct-Session-Id attribute or TACACS+ as the task… |
| 1.3.6.1.4.1.9.9.163.1.2.3.1.13 | ColumncctActiveCallCategory | read-only | current | The call category or type |
| 1.3.6.1.4.1.9.9.163.1.2.3.1.14 | ColumncctActiveInitialRxRate | read-only | current | Initial receive data rate for this call. If call is a synchronous digital call such as ISDN sync, this value is the data rate of the B-channel. If call is asyn… |
| 1.3.6.1.4.1.9.9.163.1.2.3.1.15 | ColumncctActiveInitialTxRate | read-only | current | Initial transmit data rate for this call. If call is a synchronous digital call such as ISDN sync, this value is the data rate of the B-channel. If call is asy… |
| 1.3.6.1.4.1.9.9.163.1.2.3.1.16 | ColumncctActiveResourceSlot | read-only | current | Identification of the processing resource allocated to the call. In the case of a call requiring a modem resource, this is the value of cmSlotIndex from CISCO-… |
| 1.3.6.1.4.1.9.9.163.1.2.3.1.17 | ColumncctActiveResourcePort | read-only | current | Identification of the processing resource allocated to the call. In the case of a call requiring a modem resource, this is the value of cmPortIndex from CISCO-… |
| 1.3.6.1.4.1.9.9.163.1.2.3.1.18 | ColumncctActiveEntrySlot | read-only | current | The device slot containing the port on which the call exists. |
| 1.3.6.1.4.1.9.9.163.1.2.3.1.19 | ColumncctActiveEntryPort | read-only | current | The physical port within the device slot on which the call exists. |
| 1.3.6.1.4.1.9.9.163.1.2.3.1.20 | ColumncctActiveEntryDs1 | read-only | current | The DS1 link containing the call. This may be a DS1 contained within a larger grouping of multiple DS1s within a single physical port. If the physical port is … |
| 1.3.6.1.4.1.9.9.163.1.2.3.1.21 | ColumncctActiveEntryChannel | read-only | current | The channel or timeslot within the cctActiveEntryDs1 allocated to the call. |
| 1.3.6.1.4.1.9.9.163.1.2.3.1.22 | ColumncctActiveCalledPartyId | read-only | current | The called telephone number for this call. For calls answered by the system, this corresponds to the Dialed Number Identification (DNIS). For calls originated … |
| 1.3.6.1.4.1.9.9.163.1.2.3.1.23 | ColumncctActiveCallingPartyId | read-only | current | The calling telephone number for this call. For calls answered by the system, this corresponds to the calling identification (CLID). For calls originated by th… |
| 1.3.6.1.4.1.9.9.163.1.2.3.1.24 | ColumncctActiveMpBundleId | read-only | current | Multilink PPP bundle identification for call if cctActiveServiceType has the value 'mp'. If the value of cctActiveServiceType for this call is not 'mp', then t… |
| 1.3.6.1.4.1.9.9.163.1.2.3.1.25 | ColumncctActiveChargedUnits | read-only | current | The number of charged units for this connection. For incoming calls or if charging information is not supplied by the switch, the value of this object will be … |
| 1.3.6.1.4.1.9.9.163.1.2.3.1.26 | ColumncctActiveReceiveBytes | read-only | current | The number of bytes received on the call. All the 'raw' bytes are counted including any protocol headers which may or may not be present depending on the value… |
| 1.3.6.1.4.1.9.9.163.1.2.3.1.27 | ColumncctActiveTransmitBytes | read-only | current | The number of bytes transmitted on the call. All the 'raw' bytes are counted including any protocol headers which may or may not be present depending on the va… |
| 1.3.6.1.4.1.9.9.163.1.2.3.1.28 | ColumncctActiveCallSignalingType | read-only | current | Signaling type used to setup the call. |
| 1.3.6.1.4.1.9.9.163.1.3 | NodecctHistory | |||
| 1.3.6.1.4.1.9.9.163.1.3.1 | ScalarcctHistoryTableEntriesLimit | read-write | current | The upper limit on the number of entries that the cctHistoryTable may contain. A value of zero will prevent any history from being retained. This value may not… |
| 1.3.6.1.4.1.9.9.163.1.3.2 | ScalarcctHistoryTableMaxEntries | read-only | current | The maximum allowed table length supported by this system. The value of cctHistoryTableEntriesLimit may not exceed this value. |
| 1.3.6.1.4.1.9.9.163.1.3.3 | ScalarcctHistoryTableRetainTimer | read-write | current | The maximum amount of time that an entry will be maintained within the cctHistoryTable before being deleted. A value of zero will prevent any history from bein… |
| 1.3.6.1.4.1.9.9.163.1.3.4 | ScalarcctHistoryTableNumberEntries | read-only | current | Count of the number of entries currently in the cctHistoryTable. |
| 1.3.6.1.4.1.9.9.163.1.3.5 | ScalarcctHistoryTableHighWaterMark | read-only | current | Maximum number of entries present in cctHistoryTable since last system re-initialization or the value of cctHistoryTableEntriesLimit has been changed. This cor… |
| 1.3.6.1.4.1.9.9.163.1.3.6 | ScalarcctHistoryTableNewestIndex | read-only | current | This object provides the index value of the most recent entry currently in the cctHistoryTable. A value of zero indicates there has never been an entry in the … |
| 1.3.6.1.4.1.9.9.163.1.3.7 | TablecctHistoryTable | not-accessible | current | This table provides information on terminated calls. |
| 1.3.6.1.4.1.9.9.163.1.3.7.1 | RowcctHistoryEntry | not-accessible | current | The information regarding a single terminated call. An entry of this table is created when the system initiates, detects, or is notified of a call termination.… |
| 1.3.6.1.4.1.9.9.163.1.3.7.1.1 | ColumncctHistoryIndex | not-accessible | current | A monotonically increasing integer for the sole purpose of indexing terminated calls. When it reaches the maximum value the agent wraps the value back to 1 and… |
| 1.3.6.1.4.1.9.9.163.1.3.7.1.2 | ColumncctHistoryCallId | read-only | current | The call identifier for the call. This is the same value assigned to the call in cctActiveCallId when it was in the cctActiveTable. It is possible for two cctH… |
| 1.3.6.1.4.1.9.9.163.1.3.7.1.3 | ColumncctHistorySetupTime | read-only | current | Value of sysUpTime when the call was first made known to the system. |
| 1.3.6.1.4.1.9.9.163.1.3.7.1.4 | ColumncctHistoryOrigin | read-only | current | This object indicates how the call was created. originate(1) - The call was initiated locally with the system sending the setup request. Dialout answer(2) - Th… |
| 1.3.6.1.4.1.9.9.163.1.3.7.1.5 | ColumncctHistoryConnectionTime | read-only | current | Value of sysUpTime when the system connected the call. |
| 1.3.6.1.4.1.9.9.163.1.3.7.1.6 | ColumncctHistoryPhysicalLayerReadyTime | read-only | current | Value of sysUpTime when the physical layer for the call achieved a steady state and the call is ready for higher protocol layers to begin. In the case of modem… |
| 1.3.6.1.4.1.9.9.163.1.3.7.1.7 | ColumncctHistoryServiceUpTime | read-only | current | Value of sysUpTime when the call service type identified in cctHistoryServiceType was established. |
| 1.3.6.1.4.1.9.9.163.1.3.7.1.8 | ColumncctHistoryServiceType | read-only | current | Service associated with the call. This is the highest level of service known to the system for the call. The service represents the encapsulation protocol laye… |
| 1.3.6.1.4.1.9.9.163.1.3.7.1.9 | ColumncctHistoryUserValidationTime | read-only | current | Value of sysUpTime when the user identification associated with this call was validated. See cctHistoryUserId for description of user identification. |
| 1.3.6.1.4.1.9.9.163.1.3.7.1.10 | ColumncctHistoryUserId | read-only | current | The User login ID or zero length string if unavailable. If this contains a non-zero length string, and cctHistoryUserValidationTime is zero, then the user fail… |
| 1.3.6.1.4.1.9.9.163.1.3.7.1.11 | ColumncctHistoryUserIpAddr | read-only | current | The IP address assigned to the cctHistoryUserId for this call or 0.0.0.0 if not applicable or unavailable. |
| 1.3.6.1.4.1.9.9.163.1.3.7.1.12 | ColumncctHistoryUserSubnetMask | read-only | current | The IP subnet mask assigned to the cctHistoryUserId for this call or 0.0.0.0 if not applicable or unavailable. |
| 1.3.6.1.4.1.9.9.163.1.3.7.1.13 | ColumncctHistoryAccountingSessionId | read-only | current | Accounting session identification assigned to this call by AAA. The session ID is sent by AAA to RADIUS as the Acct-Session-Id attribute or TACACS+ as the task… |
| 1.3.6.1.4.1.9.9.163.1.3.7.1.14 | ColumncctHistoryCallCategory | read-only | current | The call category or type |
| 1.3.6.1.4.1.9.9.163.1.3.7.1.15 | ColumncctHistoryInitialRxRate | read-only | current | Initial receive data rate for this call. If call is a synchronous digital call such as ISDN sync, this value is the data rate of the B-channel. If call is asyn… |
| 1.3.6.1.4.1.9.9.163.1.3.7.1.16 | ColumncctHistoryInitialTxRate | read-only | current | Initial transmit data rate for this call. If call is a synchronous digital call such as ISDN sync, this value is the data rate of the B-channel. If call is asy… |
| 1.3.6.1.4.1.9.9.163.1.3.7.1.17 | ColumncctHistoryResourceSlot | read-only | current | Identification of processing resource allocated to call. In the case of a call requiring a modem resource, this is the value of cmSlotIndex from CISCO-MODEM-MG… |
| 1.3.6.1.4.1.9.9.163.1.3.7.1.18 | ColumncctHistoryResourcePort | read-only | current | Identification of processing resource allocated to call. In the case of a call requiring a modem resource, this is the value of cmPortIndex from CISCO-MODEM-MG… |
| 1.3.6.1.4.1.9.9.163.1.3.7.1.19 | ColumncctHistoryEntrySlot | read-only | current | The device slot containing the port on which the call existed. |
| 1.3.6.1.4.1.9.9.163.1.3.7.1.20 | ColumncctHistoryEntryPort | read-only | current | The physical port within the device slot on which the call existed. |
| 1.3.6.1.4.1.9.9.163.1.3.7.1.22 | ColumncctHistoryEntryDs1 | read-only | current | The DS1 link containing the call. This may be a DS1 contained within a larger grouping of multiple DS1s within a single physical port. If the physical port is … |
| 1.3.6.1.4.1.9.9.163.1.3.7.1.23 | ColumncctHistoryEntryChannel | read-only | current | The channel or timeslot within the cctHistoryEntryDs1 which was allocated to the call. |
| 1.3.6.1.4.1.9.9.163.1.3.7.1.24 | ColumncctHistoryCalledPartyId | read-only | current | The called telephone number for this call. For calls answered by the system, this corresponds to the Dialed Number Identification (DNIS). For calls originated … |
| 1.3.6.1.4.1.9.9.163.1.3.7.1.25 | ColumncctHistoryCallingPartyId | read-only | current | The calling telephone number for this call. For calls answered by the system, this corresponds to the calling identification (CLID). For calls originated by th… |
| 1.3.6.1.4.1.9.9.163.1.3.7.1.26 | ColumncctHistoryMpBundleId | read-only | current | Multilink PPP bundle identification for call if cctHistoryServiceType has the value 'mp'. If the value of cctHistoryServiceType for this call is not 'mp', then… |
| 1.3.6.1.4.1.9.9.163.1.3.7.1.27 | ColumncctHistoryChargedUnits | read-only | current | The number of charged units for this connection. For incoming calls or if charging information is not supplied by the switch, the value of this object will be … |
| 1.3.6.1.4.1.9.9.163.1.3.7.1.28 | ColumncctHistoryReceiveBytes | read-only | current | The number of bytes received on the call. All the 'raw' bytes are counted including any protocol headers which may or may not be present depending on the value… |
| 1.3.6.1.4.1.9.9.163.1.3.7.1.29 | ColumncctHistoryTransmitBytes | read-only | current | The number of bytes transmitted on the call. All the 'raw' bytes are counted including any protocol headers which may or may not be present depending on the va… |
| 1.3.6.1.4.1.9.9.163.1.3.7.1.30 | ColumncctHistoryDisconnectTime | read-only | current | Value of sysUpTime when call was disconnected. This is when the system initiates, detects, or is notified of call termination. This is the call duration from i… |
| 1.3.6.1.4.1.9.9.163.1.3.7.1.31 | ColumncctHistoryDisconnectReasonText | read-only | current | Text description of the disconnect reason provided. Value is zero-length string if no text is available. |
| 1.3.6.1.4.1.9.9.163.1.3.7.1.32 | ColumncctHistoryCallSignalingType | read-only | current | Signaling type used to setup the call. |
| 1.3.6.1.4.1.9.9.163.1.4 | NodecctNotificationConfig | |||
| 1.3.6.1.4.1.9.9.163.1.4.1 | ScalarcctCallSetupTermNotifyEnable | read-write | current | This variable controls generation of cctCallSetupNotification and cctCallTerminateNotification. When this variable is 'true(1)', generation of these notificati… |
| 1.3.6.1.4.1.9.9.163.2 | NodecctMIBNotificationPrefix | |||
| 1.3.6.1.4.1.9.9.163.2.0 | NodecctMIBNotifications | |||
| 1.3.6.1.4.1.9.9.163.2.0.1 | NotificationcctCallSetupNotification | current | A Call Tracker Setup notification is generated whenever a new active call entry is created in the cctActiveTable. | |
| 1.3.6.1.4.1.9.9.163.2.0.2 | NotificationcctCallTerminateNotification | current | A Call Tracker Terminate notification is generated whenever a new history call entry is created in the cctHistoryTable. | |
| 1.3.6.1.4.1.9.9.163.3 | NodecctMIBConformance | |||
| 1.3.6.1.4.1.9.9.163.3.1 | NodecctMIBCompliances | |||
| 1.3.6.1.4.1.9.9.163.3.1.1 | CompliancecctMIBCompliance | deprecated | The compliance statement for entities which implement the CISCO CALL TRACKER MIB | |
| 1.3.6.1.4.1.9.9.163.3.1.2 | CompliancecctMIBComplianceRev1 | current | The compliance statement for entities which implement the CISCO CALL TRACKER MIB | |
| 1.3.6.1.4.1.9.9.163.3.2 | NodecctMIBGroups | |||
| 1.3.6.1.4.1.9.9.163.3.2.1 | GroupcctGeneralGroup | current | A collection of objects providing the general information. | |
| 1.3.6.1.4.1.9.9.163.3.2.2 | GroupcctActiveGroup | deprecated | A collection of objects providing the active call information. | |
| 1.3.6.1.4.1.9.9.163.3.2.3 | GroupcctHistoryGroup | deprecated | A collection of objects providing the historical call information. | |
| 1.3.6.1.4.1.9.9.163.3.2.4 | GroupcctNotificationConfigGroup | current | A collection of objects providing the notification configuration. | |
| 1.3.6.1.4.1.9.9.163.3.2.5 | GroupcctNotificationGroup | current | The collection of notifications used for call status changes. | |
| 1.3.6.1.4.1.9.9.163.3.2.6 | GroupcctActiveGroupRev1 | current | A collection of objects providing the active call information. | |
| 1.3.6.1.4.1.9.9.163.3.2.7 | GroupcctHistoryGroupRev1 | current | A collection of objects providing the historical call information. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CctCallCategory | INTEGER { none (1), other (2), modem (3), isdnSync (4), v110 (5), v120 (6), casDigital (7), mgcpData (8), syncData (9), lapb-ta (10) } | current | Represents possible call categories or types. none - No call category associated with call other - None of the following modem - Modem call isdn-sync - ISDN sync digital call Now mapped to syncData v110 - V110 Call v120… |
| CctCallId | Unsigned32 (1..4294967295) | current | Represents a Call Identifier. The call identifier is a monotonically assigned, positive integer which uniquely identifies the call within the system. |
| CctCallSigType | INTEGER { unknown (1), external (2), q931 (3), autoDetect (4) } | current | Represents supported signaling types for a call. Unknown - Signaling origin of call type unknown. External - Signaling origin of call type by external agent e.g. MGCP, H.248 Q931 - Signaling origin of call type by Q.931… |
| CctServiceType | INTEGER { none (1), other (2), slip (3), ppp (4), mp (5), tcpClear (6), telnet (7), exec (8), l2f (9), l2tp (10) } | current | Represents possible service types. none - No service associated with call. other - Service active, but none of the following. slip - Serial Line IP ppp - PPP mp - Multilink PPP (RFC 1990) tcpClear - Byte stream over TCP… |