CISCO-DIAL-CONTROL-MIB
44 objects
The MIB module to describe call history information for demand access and possibly other kinds of interfaces.
Imported Objects
| CISCO-SMI | ciscoExperiment |
| DIAL-CONTROL-MIB | AbsoluteCounter32 |
| IF-MIB | InterfaceIndexOrZero |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TimeStamp |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.10.25 | IdentityciscoDialControlMib | The MIB module to describe call history information for demand access and possibly other kinds of interfaces. | ||
| 1.3.6.1.4.1.9.10.25.1 | NodeciscoDialControlMibObjects | |||
| 1.3.6.1.4.1.9.10.25.1.4 | NodecCallHistory | |||
| 1.3.6.1.4.1.9.10.25.1.4.3 | TablecCallHistoryTable | not-accessible | current | A table containing information about specific calls to a specific destination. |
| 1.3.6.1.4.1.9.10.25.1.4.3.1 | RowcCallHistoryEntry | not-accessible | current | The information regarding a single Connection. |
| 1.3.6.1.4.1.9.10.25.1.4.3.1.1 | ColumncCallHistoryIndex | not-accessible | current | A monotonically increasing integer for the sole purpose of indexing call disconnection events. When it reaches the maximum value, an extremely unlikely event, … |
| 1.3.6.1.4.1.9.10.25.1.4.3.1.2 | ColumncCallHistorySetupTime | read-only | current | The value of sysUpTime when the call setup was started. This will be useful for an NMS to sort the call history entry with call setup time. Also, this object c… |
| 1.3.6.1.4.1.9.10.25.1.4.3.1.3 | ColumncCallHistoryPeerAddress | read-only | current | The number this call was connected to. If the number is not available, then it will have a length of zero. |
| 1.3.6.1.4.1.9.10.25.1.4.3.1.4 | ColumncCallHistoryPeerSubAddress | read-only | current | The subaddress this call was connected to. If the subaddress is undefined or not available, this will be a zero length string. |
| 1.3.6.1.4.1.9.10.25.1.4.3.1.5 | ColumncCallHistoryPeerId | read-only | current | This is the Id value of the peer table entry to which this call was made. If a peer table entry for this call does not exist, the value of this object will be … |
| 1.3.6.1.4.1.9.10.25.1.4.3.1.6 | ColumncCallHistoryPeerIfIndex | read-only | current | This is the ifIndex value of the peer table entry to which this call was made. If a peer table entry for this call does not exist, the value of this object wil… |
| 1.3.6.1.4.1.9.10.25.1.4.3.1.7 | ColumncCallHistoryLogicalIfIndex | read-only | current | This is the ifIndex value of the logical interface through which this call was made. For ISDN media, this would be the ifIndex of the B channel which was used … |
| 1.3.6.1.4.1.9.10.25.1.4.3.1.8 | ColumncCallHistoryDisconnectCause | read-only | current | The encoded network cause value associated with this call. The value of this object will depend on the interface type as well as on the protocol and protocol v… |
| 1.3.6.1.4.1.9.10.25.1.4.3.1.9 | ColumncCallHistoryDisconnectText | read-only | current | ASCII text describing the reason for call termination. This object exists because it would be impossible for a management station to store all possible cause v… |
| 1.3.6.1.4.1.9.10.25.1.4.3.1.10 | ColumncCallHistoryConnectTime | read-only | current | The value of sysUpTime when the call was connected. |
| 1.3.6.1.4.1.9.10.25.1.4.3.1.11 | ColumncCallHistoryDisconnectTime | read-only | current | The value of sysUpTime when the call was disconnected. |
| 1.3.6.1.4.1.9.10.25.1.4.3.1.12 | ColumncCallHistoryCallOrigin | read-only | current | The call origin. |
| 1.3.6.1.4.1.9.10.25.1.4.3.1.13 | ColumncCallHistoryChargedUnits | read-only | current | The number of charged units for this connection. For incoming calls or if charging information is not supplied by the switch, the value of this object will be … |
| 1.3.6.1.4.1.9.10.25.1.4.3.1.14 | ColumncCallHistoryInfoType | read-only | current | The information type for this call. |
| 1.3.6.1.4.1.9.10.25.1.4.3.1.15 | ColumncCallHistoryTransmitPackets | read-only | current | The number of packets which were transmitted while this call was active. |
| 1.3.6.1.4.1.9.10.25.1.4.3.1.16 | ColumncCallHistoryTransmitBytes | read-only | current | The number of bytes which were transmitted while this call was active. |
| 1.3.6.1.4.1.9.10.25.1.4.3.1.17 | ColumncCallHistoryReceivePackets | read-only | current | The number of packets which were received while this call was active. |
| 1.3.6.1.4.1.9.10.25.1.4.3.1.18 | ColumncCallHistoryReceiveBytes | read-only | current | The number of bytes which were received while this call was active. |
| 1.3.6.1.4.1.9.10.25.1.4.3.1.19 | ColumncCallHistoryReleaseSource | read-only | deprecated | Originator of the call release. |
| 1.3.6.1.4.1.9.10.25.1.4.3.1.20 | ColumncCallHistoryReleaseSrc | read-only | current | Originator of the call release. Indicates the source of the call release as follows : 1) callingPartyInPstn : Calling party in PSTN. 2) callingPartyInVoip : Ca… |
| 1.3.6.1.4.1.9.10.25.1.4.4 | TablecCallHistoryIecTable | not-accessible | current | This table contains information about Internal Error Code(s) (IEC) which caused the call to fail. |
| 1.3.6.1.4.1.9.10.25.1.4.4.1 | RowcCallHistoryIecEntry | not-accessible | current | The IEC information regarding a single call. |
| 1.3.6.1.4.1.9.10.25.1.4.4.1.1 | ColumncCallHistoryIecIndex | not-accessible | current | This object is used to index one or more IECs in the context of a single call. In most cases there will only be one IEC when a call fails. However, it is possi… |
| 1.3.6.1.4.1.9.10.25.1.4.4.1.2 | ColumncCallHistoryIec | read-only | current | This object reflects the Internal Error Code. The format is a string of dotted decimal numbers composed of the following components: Version.Entity.Category.Su… |
| 1.3.6.1.4.1.9.10.25.1.5 | NodecPeerGlobalConfiguration | |||
| 1.3.6.1.4.1.9.10.25.1.5.1 | ScalarcPeerSearchType | read-write | current | Specifies the peer search preference based on the type of peers in an universal/integrated port platform. none - both voice and data peers are searched in same… |
| 1.3.6.1.4.1.9.10.25.3 | NodeciscoDialControlMibConformance | |||
| 1.3.6.1.4.1.9.10.25.3.1 | NodeciscoDialControlMibCompliances | |||
| 1.3.6.1.4.1.9.10.25.3.1.1 | ComplianceciscoDialControlMibCompliance | deprecated | The compliance statement for entities which implement the DIAL CONTROL MIB | |
| 1.3.6.1.4.1.9.10.25.3.1.2 | ComplianceciscoDialControlMibComplianceRev1 | deprecated | The compliance statement for entities which implement the DIAL CONTROL MIB | |
| 1.3.6.1.4.1.9.10.25.3.1.3 | ComplianceciscoDialControlMibComplianceRev2 | deprecated | The compliance statement for entities which implement the DIAL CONTROL MIB | |
| 1.3.6.1.4.1.9.10.25.3.1.4 | ComplianceciscoDialControlMibComplianceRev3 | deprecated | The compliance statement for entities which implement the DIAL CONTROL MIB | |
| 1.3.6.1.4.1.9.10.25.3.1.5 | ComplianceciscoDialControlMibComplianceRev4 | current | The compliance statement for entities which implement the DIAL CONTROL MIB | |
| 1.3.6.1.4.1.9.10.25.3.2 | NodeciscoDialControlMibGroups | |||
| 1.3.6.1.4.1.9.10.25.3.2.1 | GroupcCallHistoryGroup | deprecated | A collection of objects providing the Call History capability. | |
| 1.3.6.1.4.1.9.10.25.3.2.2 | GroupcCallHistoryGroupRev1 | deprecated | A collection of objects providing the Call History capability. | |
| 1.3.6.1.4.1.9.10.25.3.2.3 | GroupcCallHistoryGroupRev2 | current | A collection of objects providing the Call History capability. | |
| 1.3.6.1.4.1.9.10.25.3.2.4 | GroupcPeerGlobalConfigurationGroup | current | A collection of objects providing the Peer global configuration. | |
| 1.3.6.1.4.1.9.10.25.3.2.5 | GroupcCallHistoryIecGroup | current | A collection of objects providing information about Internal Error Code. |