CISCO-DLSW-MIB
225 objects
This MIB module contains objects to manage Data Link Switches.
Imported Objects
| CISCO-SMI | ciscoExperiment |
| IF-MIB | ifIndex |
| SNA-SDLC-MIB | sdlcLSAddress |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks |
| SNMPv2-TC | DisplayString InstancePointer RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.10.9 | IdentityciscoDlswMIB | This MIB module contains objects to manage Data Link Switches. | ||
| 1.3.6.1.4.1.9.10.9.1 | NodeciscoDlswMIBObjects | |||
| 1.3.6.1.4.1.9.10.9.1.1 | NodeciscoDlswNode | |||
| 1.3.6.1.4.1.9.10.9.1.1.1 | ScalarciscoDlswVersion | read-only | current | This value identifies the particular version of the DLSw standard supported by this DLSw. The first octet is a hexadecimal value representing the DLSw standard… |
| 1.3.6.1.4.1.9.10.9.1.1.2 | ScalarciscoDlswVendorID | read-only | current | The value identifies the manufacturer's IEEE-assigned organizationally Unique Identifier (OUI) of this DLSw. This information is reported in DLSw Capabilities … |
| 1.3.6.1.4.1.9.10.9.1.1.3 | ScalarciscoDlswVersionString | read-only | current | This string gives product-specific information about this DLSw (e.g., product name, code release and fix level). This flows in Capabilities Exchange messages. |
| 1.3.6.1.4.1.9.10.9.1.1.4 | ScalarciscoDlswStdPacingSupport | read-only | current | Circuit pacing, as defined in the DLSw Standard, allows each of the two DLSw nodes on a circuit to control the amount of data the other is permitted to send to… |
| 1.3.6.1.4.1.9.10.9.1.1.5 | ScalarciscoDlswStatus | read-only | current | The status of the DLSw part of the system. Changing the value from active to inactive causes DLSw to take the following actions - (1) it disconnects all circui… |
| 1.3.6.1.4.1.9.10.9.1.1.6 | ScalarciscoDlswUpTime | read-only | current | The time (in hundredths of a second) since the DLSw portion of the system was last re-initialized. That is, if dciscoDlswtate is in the active state, the time … |
| 1.3.6.1.4.1.9.10.9.1.1.7 | ScalarciscoDlswVirtualSegmentLFSize | read-only | current | The largest frame size (including DLC header and info field but not any MAC-level or framing octets) this DLSw can forward on any path through itself. This obj… |
| 1.3.6.1.4.1.9.10.9.1.1.8 | ScalarciscoDlswResourceNBExclusivity | read-only | current | The value of true indicates that the NetBIOS Names configured in ciscoDlswDirNBTable are the only ones accessible via this DLSw. If a node supports sending run… |
| 1.3.6.1.4.1.9.10.9.1.1.9 | ScalarciscoDlswResourceMacExclusivity | read-only | current | The value of true indicates that the MAC addresses configured in the ciscoDlswDirMacTable are the only ones accessible via this DLSw. If a node supports sendin… |
| 1.3.6.1.4.1.9.10.9.1.1.10 | NodeciscoDlswTrapControl | |||
| 1.3.6.1.4.1.9.10.9.1.1.10.1 | ScalarciscoDlswTrapCntlTConnPartnerReject | read-only | current | Indicates whether the DLSw is permitted to emit partner reject related traps. With the value of `enabled' the DLSw will emit all partner reject related traps. … |
| 1.3.6.1.4.1.9.10.9.1.1.10.2 | ScalarciscoDlswTrapCntlTConnProtViolation | read-only | current | Indicates whether the DLSw is permitted to generate protocol-violation traps on the events such as window size violation. The changes take effect immediately. |
| 1.3.6.1.4.1.9.10.9.1.1.10.3 | ScalarciscoDlswTrapCntlTConn | read-only | current | Indicates whether the DLSw is permitted to emit transport connection up and down traps. With the value of `enabled' the DLSw will emit traps when connections e… |
| 1.3.6.1.4.1.9.10.9.1.1.10.4 | ScalarciscoDlswTrapCntlCircuit | read-only | current | Indicates whether the DLSw is permitted to generate circuit up and down traps. With the value of `enabled' the DLSw will emit traps when circuits enter `connec… |
| 1.3.6.1.4.1.9.10.9.1.2 | NodeciscoDlswTConn | |||
| 1.3.6.1.4.1.9.10.9.1.2.1 | NodeciscoDlswTConnStat | |||
| 1.3.6.1.4.1.9.10.9.1.2.1.1 | ScalarciscoDlswTConnStatActiveConnections | read-only | current | The number of transport connections that are not in `disconnected' state. |
| 1.3.6.1.4.1.9.10.9.1.2.1.2 | ScalarciscoDlswTConnStatCloseIdles | read-only | current | The number of times transport connections in this node exited the connected state with zero active circuits on the transport connection. |
| 1.3.6.1.4.1.9.10.9.1.2.1.3 | ScalarciscoDlswTConnStatCloseBusys | read-only | current | The number of times transport connections in this node exited the connected state with some non-zero number of active circuits on the transport connection. Nor… |
| 1.3.6.1.4.1.9.10.9.1.2.2 | TableciscoDlswTConnConfigTable | not-accessible | current | This table defines the transport connections that will be initiated or accepted by this DLSw. Structure of masks allows wildcard definition for a collection of… |
| 1.3.6.1.4.1.9.10.9.1.2.2.1 | RowciscoDlswTConnConfigEntry | not-accessible | current | Each conceptual row defines a collection of transport connections. |
| 1.3.6.1.4.1.9.10.9.1.2.2.1.1 | ColumnciscoDlswTConnConfigIndex | not-accessible | current | The index to the conceptual row of the table. Non-positive numbers are not allowed. There are objects defined that point to conceptual rows of this table with … |
| 1.3.6.1.4.1.9.10.9.1.2.2.1.2 | ColumnciscoDlswTConnConfigTDomain | read-only | current | The object identifier which indicates the transport domain of this conceptual row. |
| 1.3.6.1.4.1.9.10.9.1.2.2.1.3 | ColumnciscoDlswTConnConfigLocalTAddr | read-only | current | The local transport address for this conceptual row of the transport connection definition. |
| 1.3.6.1.4.1.9.10.9.1.2.2.1.4 | ColumnciscoDlswTConnConfigRemoteTAddr | read-only | current | The remote transport address. Together with the ciscoDlswTConnConfigRemoteTAddrMask, the object instance of this conceptual row identifies a collection of the … |
| 1.3.6.1.4.1.9.10.9.1.2.2.1.5 | ColumnciscoDlswTConnConfigLastModifyTime | read-only | current | The value of ciscoDlswUpTime when the value of any object in this conceptual row was last changed. This value may be compared to ciscoDlswTConnOperConnectTime … |
| 1.3.6.1.4.1.9.10.9.1.2.2.1.6 | ColumnciscoDlswTConnConfigEntryType | read-only | current | The object instance signifies the type of entry in the associated conceptual row. The value of `individual' means that the entry applies to a specific partner … |
| 1.3.6.1.4.1.9.10.9.1.2.2.1.7 | ColumnciscoDlswTConnConfigGroupDefinition | read-only | current | For conceptual rows of `individual' and `global' as specified in ciscoDlswTConnConfigEntryType, the instance of this object is `0.0'. For conceptual rows of `g… |
| 1.3.6.1.4.1.9.10.9.1.2.2.1.8 | ColumnciscoDlswTConnConfigSetupType | read-only | current | This value of the instance of a conceptual row identifies the behavior of the collection of transport connections that this conceptual row defines. The value o… |
| 1.3.6.1.4.1.9.10.9.1.2.2.1.9 | ColumnciscoDlswTConnConfigSapList | read-only | current | The SAP list indicates which SAPs are advertised to the transport connection defined by the local peer whose transport address is given by ciscoDlswTConnConfig… |
| 1.3.6.1.4.1.9.10.9.1.2.2.1.10 | ColumnciscoDlswTConnConfigAdvertiseMacNB | read-only | current | The value of true indicates that defined local MAC addresses and NetBIOS names will be advertised to a partner node via initial and (if supported) run-time cap… |
| 1.3.6.1.4.1.9.10.9.1.2.2.1.11 | ColumnciscoDlswTConnConfigInitCirRecvWndw | read-only | current | The initial circuit receive pacing window size, in the unit of SSP messages, to be used for future transport connections activated using this table row. The ma… |
| 1.3.6.1.4.1.9.10.9.1.2.2.1.12 | ColumnciscoDlswTConnConfigOpens | read-only | current | Number of times transport connections entered connected state according to the definition of this conceptual row. |
| 1.3.6.1.4.1.9.10.9.1.2.2.1.13 | ColumnciscoDlswTConnConfigRowStatus | read-only | current | This object is used by a Management Station to create or delete the row entry in the ciscoDlswTConnConfigTable following the RowStatus textual convention. The … |
| 1.3.6.1.4.1.9.10.9.1.2.3 | TableciscoDlswTConnOperTable | not-accessible | current | A list of transport connections. It is optional but desirable for an implementation to keep an entry for some period of time after the transport connection is … |
| 1.3.6.1.4.1.9.10.9.1.2.3.1 | RowciscoDlswTConnOperEntry | not-accessible | current | |
| 1.3.6.1.4.1.9.10.9.1.2.3.1.1 | ColumnciscoDlswTConnOperTDomain | not-accessible | current | The object identifier indicates the transport domain of this transport connection. |
| 1.3.6.1.4.1.9.10.9.1.2.3.1.2 | ColumnciscoDlswTConnOperLocalTAddr | read-only | current | The local transport address for this transport connection. This value could be different from ciscoDlswTConnConfigLocalAddr, if the value of the latter were ch… |
| 1.3.6.1.4.1.9.10.9.1.2.3.1.3 | ColumnciscoDlswTConnOperRemoteTAddr | not-accessible | current | The remote transport address of this transport connection. |
| 1.3.6.1.4.1.9.10.9.1.2.3.1.4 | ColumnciscoDlswTConnOperEntryTime | read-only | current | The value of ciscoDlswUpTime when this transport connection conceptual row was created. |
| 1.3.6.1.4.1.9.10.9.1.2.3.1.5 | ColumnciscoDlswTConnOperConnectTime | read-only | current | The value of ciscoDlswUpTime when this transport connection last entered the 'connected' state. A value of zero means this transport connection has never been … |
| 1.3.6.1.4.1.9.10.9.1.2.3.1.6 | ColumnciscoDlswTConnOperState | read-only | current | The state of this transport connection. The transport connection enters `connecting' state when DLSw makes a connection request to the transport layer. Once in… |
| 1.3.6.1.4.1.9.10.9.1.2.3.1.7 | ColumnciscoDlswTConnOperConfigIndex | read-only | current | The value of ciscoDlswTConnConfigIndex of the ciscoDlswTConnConfigEntry that governs the configuration information used by this ciscoDlswTConnOperEntry. A mana… |
| 1.3.6.1.4.1.9.10.9.1.2.3.1.8 | ColumnciscoDlswTConnOperFlowCntlMode | read-only | current | The flow control mechanism in use on this transport connection. This value is undetermined (1) before the mode of flow control can be established on a new tran… |
| 1.3.6.1.4.1.9.10.9.1.2.3.1.9 | ColumnciscoDlswTConnOperPartnerVersion | read-only | current | This value identifies which version (first octet) and release (second octet) of the DLSw standard is supported by this partner DLSw. This information is obtain… |
| 1.3.6.1.4.1.9.10.9.1.2.3.1.10 | ColumnciscoDlswTConnOperPartnerVendorID | read-only | current | This value identifies the IEEE-assigned organizationally Unique Identifier (OUI) of the maker of this partner DLSw. This information is obtained from a DLSw ca… |
| 1.3.6.1.4.1.9.10.9.1.2.3.1.11 | ColumnciscoDlswTConnOperPartnerVersionStr | read-only | current | This value identifies the particular product version (e.g., product name, code level, fix level) of this partner DLSw. The format of the actual version string … |
| 1.3.6.1.4.1.9.10.9.1.2.3.1.12 | ColumnciscoDlswTConnOperPartnerInitPacingWndw | read-only | current | The value of the partner initial receive pacing window. This is our initial send pacing window for all new circuits on this transport connection, as modified a… |
| 1.3.6.1.4.1.9.10.9.1.2.3.1.13 | ColumnciscoDlswTConnOperPartnerSapList | read-only | current | The Supported SAP List received in the capabilities exchange message from the partner DLSw. This list has the same format described for ciscoDlswTConnConfigSap… |
| 1.3.6.1.4.1.9.10.9.1.2.3.1.14 | ColumnciscoDlswTConnOperPartnerNBExcl | read-only | current | The value of true signifies that the NetBIOS names received from this partner in the NetBIOS name list in its capabilities exchange message are the only NetBIO… |
| 1.3.6.1.4.1.9.10.9.1.2.3.1.15 | ColumnciscoDlswTConnOperPartnerMacExcl | read-only | current | The value of true signifies that the MAC addresses received from this partner in the MAC address list in its capabilities exchange message are the only MAC add… |
| 1.3.6.1.4.1.9.10.9.1.2.3.1.16 | ColumnciscoDlswTConnOperPartnerNBInfo | read-only | current | It is up to this DSLw whether to keep either none, some, or all of the NetBIOS name list that was received in the capabilities exchange message sent by this pa… |
| 1.3.6.1.4.1.9.10.9.1.2.3.1.17 | ColumnciscoDlswTConnOperPartnerMacInfo | read-only | current | It is up to this DLSw whether to keep either none, some, or all of the MAC address list that was received in the capabilities exchange message sent by this par… |
| 1.3.6.1.4.1.9.10.9.1.2.3.1.18 | ColumnciscoDlswTConnOperDiscTime | read-only | current | The value of ciscoDlswUpTime when ciscoDlswTConnOperState last entered `disconnected' state. |
| 1.3.6.1.4.1.9.10.9.1.2.3.1.19 | ColumnciscoDlswTConnOperDiscReason | read-only | current | This object signifies the reason that either prevented the transport connection from entering the connected state, or caused the transport connection to enter … |
| 1.3.6.1.4.1.9.10.9.1.2.3.1.20 | ColumnciscoDlswTConnOperDiscActiveCir | read-only | current | The number of circuits active (not in DISCONNECTED state) at the time the transport connection was last disconnected. This value is zero if the transport conne… |
| 1.3.6.1.4.1.9.10.9.1.2.3.1.21 | ColumnciscoDlswTConnOperInDataPkts | read-only | current | The number of Switch-to-Switch Protocol (SSP) messages of type DGRMFRAME, DATAFRAME, or INFOFRAME received on this transport connection. |
| 1.3.6.1.4.1.9.10.9.1.2.3.1.22 | ColumnciscoDlswTConnOperOutDataPkts | read-only | current | The number of Switch-to-Switch Protocol (SSP) messages of type DGRMFRAME, DATAFRAME, or INFOFRAME transmitted on this transport connection. |
| 1.3.6.1.4.1.9.10.9.1.2.3.1.23 | ColumnciscoDlswTConnOperInDataOctets | read-only | current | The number octets in Switch-to-Switch Protocol (SSP) messages of type DGRMFRAME, DATAFRAME, or INFOFRAME received on this transport connection. Each message is… |
| 1.3.6.1.4.1.9.10.9.1.2.3.1.24 | ColumnciscoDlswTConnOperOutDataOctets | read-only | current | The number octets in Switch-to-Switch Protocol (SSP) messages of type DGRMFRAME, DATAFRAME, or INFOFRAME transmitted on this transport connection. Each message… |
| 1.3.6.1.4.1.9.10.9.1.2.3.1.25 | ColumnciscoDlswTConnOperInCntlPkts | read-only | current | The number of Switch-to-Switch Protocol (SSP) messages received on this transport connection which were not of type DGRMFRAME, DATAFRAME, or INFOFRAME. |
| 1.3.6.1.4.1.9.10.9.1.2.3.1.26 | ColumnciscoDlswTConnOperOutCntlPkts | read-only | current | The number of Switch-to-Switch Protocol (SSP) messages of transmitted on this transport connection which were not of type DGRMFRAME, DATAFRAME, or INFOFRAME. |
| 1.3.6.1.4.1.9.10.9.1.2.3.1.27 | ColumnciscoDlswTConnOperCURexSents | read-only | current | The number of CanUReach_ex messages sent on this transport connection. |
| 1.3.6.1.4.1.9.10.9.1.2.3.1.28 | ColumnciscoDlswTConnOperICRexRcvds | read-only | current | The number of ICanReach_ex messages received on this transport connection. |
| 1.3.6.1.4.1.9.10.9.1.2.3.1.29 | ColumnciscoDlswTConnOperCURexRcvds | read-only | current | The number of CanUReach_ex messages received on this transport connection. |
| 1.3.6.1.4.1.9.10.9.1.2.3.1.30 | ColumnciscoDlswTConnOperICRexSents | read-only | current | The number of ICanReach_ex messages sent on this transport connection. |
| 1.3.6.1.4.1.9.10.9.1.2.3.1.31 | ColumnciscoDlswTConnOperNQexSents | read-only | current | The number of NetBIOS_NQ_ex (NetBIOS Name Query-explorer) messages sent on this transport connection. |
| 1.3.6.1.4.1.9.10.9.1.2.3.1.32 | ColumnciscoDlswTConnOperNRexRcvds | read-only | current | The number of NETBIOS_NR_ex (NetBIOS Name Recognized-explorer) messages received on this transport connection. |
| 1.3.6.1.4.1.9.10.9.1.2.3.1.33 | ColumnciscoDlswTConnOperNQexRcvds | read-only | current | The number of NETBIOS_NQ_ex messages received on this transport connection. |
| 1.3.6.1.4.1.9.10.9.1.2.3.1.34 | ColumnciscoDlswTConnOperNRexSents | read-only | current | The number of NETBIOS_NR_ex messages sent on this transport connection. |
| 1.3.6.1.4.1.9.10.9.1.2.3.1.35 | ColumnciscoDlswTConnOperCirCreates | read-only | current | The number of times that circuits entered `circuit_established' state (not counting transitions from `circuit_restart'). |
| 1.3.6.1.4.1.9.10.9.1.2.3.1.36 | ColumnciscoDlswTConnOperCircuits | read-only | current | The number of currently active circuits on this transport connection, where `active' means not in `disconnected' state. |
| 1.3.6.1.4.1.9.10.9.1.2.4 | NodeciscoDlswTConnSpecific | |||
| 1.3.6.1.4.1.9.10.9.1.2.4.1 | NodeciscoDlswTConnTcp | |||
| 1.3.6.1.4.1.9.10.9.1.2.4.1.1 | TableciscoDlswTConnTcpConfigTable | not-accessible | current | This table defines the TCP transport connections that will be either initiated by or accepted by this DSLw. It augments the entries in ciscoDlswTConnConfigTabl… |
| 1.3.6.1.4.1.9.10.9.1.2.4.1.1.1 | RowciscoDlswTConnTcpConfigEntry | not-accessible | current | Each conceptual row defines parameters that are specific to ciscoDlswTCPDomain transport connections. |
| 1.3.6.1.4.1.9.10.9.1.2.4.1.1.1.1 | ColumnciscoDlswTConnTcpConfigKeepAliveInt | read-only | current | The time in seconds between TCP keepAlive messages when no traffic is flowing. Zero signifies no keepAlive protocol. Changes take effect only for new TCP conne… |
| 1.3.6.1.4.1.9.10.9.1.2.4.1.1.1.2 | ColumnciscoDlswTConnTcpConfigTcpConnections | read-only | current | This is our preferred number of TCP connections within a TCP transport connection. The actual number used is negotiated at capabilities exchange time. Changes … |
| 1.3.6.1.4.1.9.10.9.1.2.4.1.1.1.3 | ColumnciscoDlswTConnTcpConfigMaxSegmentSize | read-only | current | This is the number of bytes that this node is willing to receive over the read TCP connection(s). Changes take effect for new transport connections. |
| 1.3.6.1.4.1.9.10.9.1.2.4.1.2 | TableciscoDlswTConnTcpOperTable | not-accessible | current | A list of TCP transport connections. It is optional but desirable for an implementation to keep an entry for some period of time after the transport connection… |
| 1.3.6.1.4.1.9.10.9.1.2.4.1.2.1 | RowciscoDlswTConnTcpOperEntry | not-accessible | current | |
| 1.3.6.1.4.1.9.10.9.1.2.4.1.2.1.1 | ColumnciscoDlswTConnTcpOperKeepAliveInt | read-only | current | The time in seconds between TCP keepAlive messages when no traffic is flowing. Zero signifies no keepAlive protocol is operating. |
| 1.3.6.1.4.1.9.10.9.1.2.4.1.2.1.2 | ColumnciscoDlswTConnTcpOperPrefTcpConnections | read-only | current | This is the number of TCP connections preferred by this DLSw partner, as received in its capabilities exchange message. |
| 1.3.6.1.4.1.9.10.9.1.2.4.1.2.1.3 | ColumnciscoDlswTConnTcpOperTcpConnections | read-only | current | This is the actual current number of TCP connections within this transport connection. |
| 1.3.6.1.4.1.9.10.9.1.3 | NodeciscoDlswInterface | |||
| 1.3.6.1.4.1.9.10.9.1.3.1 | TableciscoDlswIfTable | not-accessible | current | The list of interfaces on which DLSw is active. |
| 1.3.6.1.4.1.9.10.9.1.3.1.1 | RowciscoDlswIfEntry | not-accessible | current | |
| 1.3.6.1.4.1.9.10.9.1.3.1.1.1 | ColumnciscoDlswIfRowStatus | read-only | current | This object is used by a Management Station to create or delete the row entry in the ciscoDlswIfTable following the RowStatus textual convention. |
| 1.3.6.1.4.1.9.10.9.1.3.1.1.2 | ColumnciscoDlswIfVirtualSegment | read-only | current | The segment number that uniquely identifies the virtual segment to which this DLSw interface is connected. Current source routing protocols limit this value to… |
| 1.3.6.1.4.1.9.10.9.1.3.1.1.3 | ColumnciscoDlswIfSapList | read-only | current | The SAP list indicates which SAPs are allowed to be data link switched through this interface. This list has the same format described for ciscoDlswTConnConfig… |
| 1.3.6.1.4.1.9.10.9.1.4 | NodeciscoDlswDirectory | |||
| 1.3.6.1.4.1.9.10.9.1.4.1 | NodeciscoDlswDirStat | |||
| 1.3.6.1.4.1.9.10.9.1.4.1.1 | ScalarciscoDlswDirMacEntries | read-only | current | The current total number of entries in the ciscoDlswDirMacTable. |
| 1.3.6.1.4.1.9.10.9.1.4.1.2 | ScalarciscoDlswDirMacCacheHits | read-only | current | The number of times a cache search for a particular MAC address resulted in success. |
| 1.3.6.1.4.1.9.10.9.1.4.1.3 | ScalarciscoDlswDirMacCacheMisses | read-only | current | The number of times a cache search for a particular MAC address resulted in failure. |
| 1.3.6.1.4.1.9.10.9.1.4.1.4 | ScalarciscoDlswDirNBEntries | read-only | current | The current total number of entries in the ciscoDlswDirNBTable. |
| 1.3.6.1.4.1.9.10.9.1.4.1.5 | ScalarciscoDlswDirNBCacheHits | read-only | current | The number of times a cache search for a particular NetBIOS name resulted in success. |
| 1.3.6.1.4.1.9.10.9.1.4.1.6 | ScalarciscoDlswDirNBCacheMisses | read-only | current | The number of times a cache search for a particular NetBIOS name resulted in failure. |
| 1.3.6.1.4.1.9.10.9.1.4.2 | NodeciscoDlswDirCache | |||
| 1.3.6.1.4.1.9.10.9.1.4.2.1 | TableciscoDlswDirMacTable | not-accessible | current | This table contains locations of MAC addresses. They could be either verified or not verified, local or remote, and configured locally or learned from either C… |
| 1.3.6.1.4.1.9.10.9.1.4.2.1.1 | RowciscoDlswDirMacEntry | not-accessible | current | Indexed by ciscoDlswDirMacIndex. |
| 1.3.6.1.4.1.9.10.9.1.4.2.1.1.1 | ColumnciscoDlswDirMacIndex | not-accessible | current | Uniquely identifies a conceptual row of this table. |
| 1.3.6.1.4.1.9.10.9.1.4.2.1.1.2 | ColumnciscoDlswDirMacMac | read-only | current | The MAC address, together with the ciscoDlswDirMacMask, specifies a set of MAC addresses that are defined or discovered through an interface or partner DLSw no… |
| 1.3.6.1.4.1.9.10.9.1.4.2.1.1.3 | ColumnciscoDlswDirMacMask | read-only | current | The MAC address mask, together with the ciscoDlswDirMacMac, specifies a set of MAC addresses that are defined or discovered through an interface or partner DLS… |
| 1.3.6.1.4.1.9.10.9.1.4.2.1.1.4 | ColumnciscoDlswDirMacEntryType | read-only | current | The cause of the creation of this conceptual row. It could be one of the three methods: (1) user configured, including via management protocol set operations, … |
| 1.3.6.1.4.1.9.10.9.1.4.2.1.1.5 | ColumnciscoDlswDirMacLocationType | read-only | current | The location of the resource (or a collection of resources using a mask) of this conceptual row is either (1) local - the resource is reachable via an interfac… |
| 1.3.6.1.4.1.9.10.9.1.4.2.1.1.6 | ColumnciscoDlswDirMacLocation | read-only | current | Points to either the ifEntry, ciscoDlswTConnConfigEntry, ciscoDlswTConnOperEntry, 0.0, or something that is implementation specific. It identifies the location… |
| 1.3.6.1.4.1.9.10.9.1.4.2.1.1.7 | ColumnciscoDlswDirMacStatus | read-only | current | This object specifies whether DLSw currently believes the MAC address to be accessible at the specified location. The value `notReachable' allows a configured … |
| 1.3.6.1.4.1.9.10.9.1.4.2.1.1.8 | ColumnciscoDlswDirMacLFSize | read-only | current | The largest size of the MAC INFO field (LLC header and data) that a circuit to the MAC address can carry through this path. |
| 1.3.6.1.4.1.9.10.9.1.4.2.1.1.9 | ColumnciscoDlswDirMacRowStatus | read-only | current | This object is used by a Management Station to create or delete the row entry in the ciscoDlswDirMacTable following the RowStatus textual convention. |
| 1.3.6.1.4.1.9.10.9.1.4.2.2 | TableciscoDlswDirNBTable | not-accessible | current | This table contains locations of NetBIOS names. They could be either verified or not verified, local or remote, and configured locally or learned from either C… |
| 1.3.6.1.4.1.9.10.9.1.4.2.2.1 | RowciscoDlswDirNBEntry | not-accessible | current | Indexed by ciscoDlswDirNBIndex. |
| 1.3.6.1.4.1.9.10.9.1.4.2.2.1.1 | ColumnciscoDlswDirNBIndex | not-accessible | current | Uniquely identifies a conceptual row of this table. |
| 1.3.6.1.4.1.9.10.9.1.4.2.2.1.2 | ColumnciscoDlswDirNBName | read-only | current | The NetBIOS name (including `any char' and `wildcard' characters) specifies a set of NetBIOS names that are defined or discovered through an interface or partn… |
| 1.3.6.1.4.1.9.10.9.1.4.2.2.1.3 | ColumnciscoDlswDirNBNameType | read-only | current | Whether ciscoDlswDirNBName represents an (or a set of) individual or group NetBIOS name(s). |
| 1.3.6.1.4.1.9.10.9.1.4.2.2.1.4 | ColumnciscoDlswDirNBEntryType | read-only | current | The cause of the creation of this conceptual row. It could be one of the three methods: (1) user configured, including via management protocol set operations, … |
| 1.3.6.1.4.1.9.10.9.1.4.2.2.1.5 | ColumnciscoDlswDirNBLocationType | read-only | current | The location of the resource (or a collection of resources using any char/wildcard characters) of this conceptual row is either (1) local - the resource is rea… |
| 1.3.6.1.4.1.9.10.9.1.4.2.2.1.6 | ColumnciscoDlswDirNBLocation | read-only | current | Points to either the ifEntry, ciscoDlswTConnConfigEntry, ciscoDlswTConnOperEntry, 0.0, or something that is implementation specific. It identifies the location… |
| 1.3.6.1.4.1.9.10.9.1.4.2.2.1.7 | ColumnciscoDlswDirNBStatus | read-only | current | This object specifies whether DLSw currently believes the NetBIOS name to be accessible at the specified location. The value `notReachable' allows a configured… |
| 1.3.6.1.4.1.9.10.9.1.4.2.2.1.8 | ColumnciscoDlswDirNBLFSize | read-only | current | The largest size of the MAC INFO field (LLC header and data) that a circuit to the NB name can carry through this path. |
| 1.3.6.1.4.1.9.10.9.1.4.2.2.1.9 | ColumnciscoDlswDirNBRowStatus | read-only | current | This object is used by a Management Station to create or delete the row entry in the ciscoDlswDirNBTable following the RowStatus textual convention. |
| 1.3.6.1.4.1.9.10.9.1.4.3 | NodeciscoDlswDirLocate | |||
| 1.3.6.1.4.1.9.10.9.1.4.3.1 | TableciscoDlswDirLocateMacTable | not-accessible | current | This table is used to retrieve all entries in the ciscoDlswDirMacTable that match a given MAC address, in the order of the best matched first, the second best … |
| 1.3.6.1.4.1.9.10.9.1.4.3.1.1 | RowciscoDlswDirLocateMacEntry | not-accessible | current | Indexed by ciscoDlswDirLocateMacMac and ciscoDlswDirLocateMacMatch. The first object is the MAC address of interest, and the second object is the order in the … |
| 1.3.6.1.4.1.9.10.9.1.4.3.1.1.1 | ColumnciscoDlswDirLocateMacMac | not-accessible | current | The MAC address to be located. |
| 1.3.6.1.4.1.9.10.9.1.4.3.1.1.2 | ColumnciscoDlswDirLocateMacMatch | not-accessible | current | The order of the entries of ciscoDlswDirMacTable that match ciscoDlswDirLocateMacMac. A value of one represents the entry that best matches the MAC address. A … |
| 1.3.6.1.4.1.9.10.9.1.4.3.1.1.3 | ColumnciscoDlswDirLocateMacLocation | read-only | current | Points to the ciscoDlswDirMacEntry. |
| 1.3.6.1.4.1.9.10.9.1.4.3.2 | TableciscoDlswDirLocateNBTable | not-accessible | current | This table is used to retrieve all entries in the ciscoDlswDirNBTable that match a given NetBIOS name, in the order of the best matched first, the second best … |
| 1.3.6.1.4.1.9.10.9.1.4.3.2.1 | RowciscoDlswDirLocateNBEntry | not-accessible | current | Indexed by ciscoDlswDirLocateNBName and ciscoDlswDirLocateNBMatch. The first object is the NetBIOS name of interest, and the second object is the order in the … |
| 1.3.6.1.4.1.9.10.9.1.4.3.2.1.1 | ColumnciscoDlswDirLocateNBName | not-accessible | current | The NetBIOS name to be located (no any char or wildcards). |
| 1.3.6.1.4.1.9.10.9.1.4.3.2.1.2 | ColumnciscoDlswDirLocateNBMatch | not-accessible | current | The order of the entries of ciscoDlswDirNBTable that match ciscoDlswDirLocateNBName. A value of one represents the entry that best matches the NetBIOS name. A … |
| 1.3.6.1.4.1.9.10.9.1.4.3.2.1.3 | ColumnciscoDlswDirLocateNBLocation | read-only | current | Points to the ciscoDlswDirNBEntry. |
| 1.3.6.1.4.1.9.10.9.1.5 | NodeciscoDlswCircuit | |||
| 1.3.6.1.4.1.9.10.9.1.5.1 | NodeciscoDlswCircuitStat | |||
| 1.3.6.1.4.1.9.10.9.1.5.1.1 | ScalarciscoDlswActiveCircuits | read-only | current | The current number of circuits in ciscoDlswCircuitTable that are not in the disconnected state. |
| 1.3.6.1.4.1.9.10.9.1.5.1.2 | ScalarciscoDlswCircuitCreates | read-only | current | The total number of entries ever added to ciscoDlswCircuitTable, or reactivated upon exiting `disconnected' state. |
| 1.3.6.1.4.1.9.10.9.1.5.2 | TableciscoDlswCircuitTable | not-accessible | current | This table is the circuit representation in the DLSw entity. Virtual data links are used to represent any internal end stations. There is a conceptual row asso… |
| 1.3.6.1.4.1.9.10.9.1.5.2.1 | RowciscoDlswCircuitEntry | not-accessible | current | |
| 1.3.6.1.4.1.9.10.9.1.5.2.1.1 | ColumnciscoDlswCircuitS1Mac | not-accessible | current | The MAC Address of End Station 1 (S1) used for this circuit. |
| 1.3.6.1.4.1.9.10.9.1.5.2.1.2 | ColumnciscoDlswCircuitS1Sap | not-accessible | current | The SAP at End Station 1 (S1) used for this circuit. |
| 1.3.6.1.4.1.9.10.9.1.5.2.1.3 | ColumnciscoDlswCircuitS1IfIndex | read-only | current | The IfEntry index of the local interface through which S1 can be reached. |
| 1.3.6.1.4.1.9.10.9.1.5.2.1.4 | ColumnciscoDlswCircuitS1DlcType | read-only | current | The DLC protocol in use between the DLSw node and S1. |
| 1.3.6.1.4.1.9.10.9.1.5.2.1.5 | ColumnciscoDlswCircuitS1RouteInfo | read-only | current | If source-route bridging is in use between the DLSw node and S1, this is the routing information field describing the path between the two devices. Otherwise t… |
| 1.3.6.1.4.1.9.10.9.1.5.2.1.6 | ColumnciscoDlswCircuitS1CircuitId | read-only | current | The Circuit ID assigned by this DLSw node to this circuit. The first four octets are the DLC port Id, and the second four octets are the Data Link Correlator. … |
| 1.3.6.1.4.1.9.10.9.1.5.2.1.7 | ColumnciscoDlswCircuitS1Dlc | read-only | current | Points to a conceptual row of the underlying DLC MIB, which could either be the standard SDLC or LLC MIBs, or an enterprise-specific DLC MIB. |
| 1.3.6.1.4.1.9.10.9.1.5.2.1.8 | ColumnciscoDlswCircuitS2Mac | not-accessible | current | The MAC Address of End Station 2 (S2) used for this circuit. |
| 1.3.6.1.4.1.9.10.9.1.5.2.1.9 | ColumnciscoDlswCircuitS2Sap | not-accessible | current | The SAP at End Station 2 (S2) used for this circuit. |
| 1.3.6.1.4.1.9.10.9.1.5.2.1.10 | ColumnciscoDlswCircuitS2Location | read-only | current | The location of End Station 2 (S2). If the location of End Station 2 is local, the interface information will be available in the conceptual row whose S1 and S… |
| 1.3.6.1.4.1.9.10.9.1.5.2.1.11 | ColumnciscoDlswCircuitS2TDomain | read-only | current | If the location of End Station 2 is remote, this value is the transport domain of the transport protocol the circuit is running over. Otherwise, the value is 0… |
| 1.3.6.1.4.1.9.10.9.1.5.2.1.12 | ColumnciscoDlswCircuitS2TAddress | read-only | current | If the location of End Station 2 is remote, this object contains the address of the partner DLSw, else it will be an OCTET STRING of zero length. |
| 1.3.6.1.4.1.9.10.9.1.5.2.1.13 | ColumnciscoDlswCircuitS2CircuitId | read-only | current | The Circuit ID assigned to this circuit by the partner DLSw node. The first four octets are the DLC port Id, and the second four octets are the Data Link Corre… |
| 1.3.6.1.4.1.9.10.9.1.5.2.1.14 | ColumnciscoDlswCircuitOrigin | read-only | current | This object specifies which of the two end stations initiated the establishment of this circuit. |
| 1.3.6.1.4.1.9.10.9.1.5.2.1.15 | ColumnciscoDlswCircuitEntryTime | read-only | current | The value of ciscoDlswUpTime when this circuit table conceptual row was created. |
| 1.3.6.1.4.1.9.10.9.1.5.2.1.16 | ColumnciscoDlswCircuitStateTime | read-only | current | The value of ciscoDlswUpTime when this circuit entered the current state. |
| 1.3.6.1.4.1.9.10.9.1.5.2.1.17 | ColumnciscoDlswCircuitState | read-only | current | The current state of this circuit. The implementation may choose to keep entries for some period of time after circuit disconnect, so the network management st… |
| 1.3.6.1.4.1.9.10.9.1.5.2.1.18 | ColumnciscoDlswCircuitPriority | read-only | current | The transmission priority of this circuit as understood by this DLSw node. This value is determined by the two DLSw nodes at circuit startup time. If this DLSw… |
| 1.3.6.1.4.1.9.10.9.1.5.2.1.19 | ColumnciscoDlswCircuitFCSendGrantedUnits | read-only | current | The number of paced SSP messages that this DLSw is currently authorized to send on this circuit before it must stop and wait for an additional flow control ind… |
| 1.3.6.1.4.1.9.10.9.1.5.2.1.20 | ColumnciscoDlswCircuitFCSendCurrentWndw | read-only | current | The current window size that this DLSw is using in its role as a data sender. This is the value by which this DLSw would increase the number of messages it is … |
| 1.3.6.1.4.1.9.10.9.1.5.2.1.21 | ColumnciscoDlswCircuitFCRecvGrantedUnits | read-only | current | The current number of paced SSP messages that this DLSw has authorized the partner DLSw to send on this circuit before the partner DLSw must stop and wait for … |
| 1.3.6.1.4.1.9.10.9.1.5.2.1.22 | ColumnciscoDlswCircuitFCRecvCurrentWndw | read-only | current | The current window size that this DLSw is using in its role as a data receiver. This is the number of additional paced SSP messages that this DLSw would be aut… |
| 1.3.6.1.4.1.9.10.9.1.5.2.1.23 | ColumnciscoDlswCircuitFCLargestRecvGranted | read-only | current | The largest receive window size granted by this DLSw during the current activation of this circuit. This is not the largest number of messages granted at any t… |
| 1.3.6.1.4.1.9.10.9.1.5.2.1.24 | ColumnciscoDlswCircuitFCLargestSendGranted | read-only | current | The largest send (with respect to this DLSw) window size granted by the partner DLSw during the current activation of this circuit. The value zero should be re… |
| 1.3.6.1.4.1.9.10.9.1.5.2.1.25 | ColumnciscoDlswCircuitFCHalveWndwSents | read-only | current | The number of Halve Window operations this DLSw has sent on this circuit, in its role as a data receiver. The value zero should be returned if this circuit is … |
| 1.3.6.1.4.1.9.10.9.1.5.2.1.26 | ColumnciscoDlswCircuitFCResetOpSents | read-only | current | The number of Reset Window operations this DLSw has sent on this circuit, in its role as a data receiver. The value zero should be returned if this circuit is … |
| 1.3.6.1.4.1.9.10.9.1.5.2.1.27 | ColumnciscoDlswCircuitFCHalveWndwRcvds | read-only | current | The number of Halve Window operations this DLSw has received on this circuit, in its role as a data sender. The value zero should be returned if this circuit i… |
| 1.3.6.1.4.1.9.10.9.1.5.2.1.28 | ColumnciscoDlswCircuitFCResetOpRcvds | read-only | current | The number of Reset Window operations this DLSw has received on this circuit, in its role as a data sender. The value zero should be returned if this circuit i… |
| 1.3.6.1.4.1.9.10.9.1.5.2.1.29 | ColumnciscoDlswCircuitDiscReasonLocal | read-only | current | The reason why this circuit was last disconnected, as seen by this DLSw node. This object is present only if the implementation keeps circuit table entries aro… |
| 1.3.6.1.4.1.9.10.9.1.5.2.1.30 | ColumnciscoDlswCircuitDiscReasonRemote | read-only | current | The generic reason code why this circuit was last disconnected, as reported by the DLSw partner in a HALT_DL or HALT_DL_NOACK. If the partner does not send a r… |
| 1.3.6.1.4.1.9.10.9.1.5.2.1.31 | ColumnciscoDlswCircuitDiscReasonRemoteData | read-only | current | Implementation-specific data reported by the DLSw partner in a HALT_DL or HALT_DL_NOACK, to help specify how and why this circuit was last disconnected. If the… |
| 1.3.6.1.4.1.9.10.9.1.6 | NodeciscoDlswSdlc | |||
| 1.3.6.1.4.1.9.10.9.1.6.1 | ScalarciscoDlswSdlcLsEntries | read-only | current | The number of entries in ciscoDlswSdlcLsTable. |
| 1.3.6.1.4.1.9.10.9.1.6.2 | TableciscoDlswSdlcLsTable | not-accessible | current | The table defines the virtual MAC addresses for those SDLC link stations that participate in data link switching. |
| 1.3.6.1.4.1.9.10.9.1.6.2.1 | RowciscoDlswSdlcLsEntry | not-accessible | current | The index of this table is the ifIndex value for the SDLC port which owns this link station and the poll address of the particular SDLC link station. |
| 1.3.6.1.4.1.9.10.9.1.6.2.1.1 | ColumnciscoDlswSdlcLsLocalMac | read-only | current | The virtual MAC address used to represent the SDLC-attached link station to the rest of the DLSw network. |
| 1.3.6.1.4.1.9.10.9.1.6.2.1.2 | ColumnciscoDlswSdlcLsLocalSap | read-only | current | The SAP used to represent this link station. |
| 1.3.6.1.4.1.9.10.9.1.6.2.1.3 | ColumnciscoDlswSdlcLsLocalBlockNum | read-only | current | The block number is the first three digits of the node_id, if available. These 3 hexadecimal digits identify the product and are not configurable. |
| 1.3.6.1.4.1.9.10.9.1.6.2.1.4 | ColumnciscoDlswSdlcLsLocalIdNum | read-only | current | The ID number is the last 5 digits of the node_id, if available. These 5 hexadecimal digits are administratively defined and combined with the 3 digit block nu… |
| 1.3.6.1.4.1.9.10.9.1.6.2.1.5 | ColumnciscoDlswSdlcLsRemoteMac | read-only | current | The MAC address to which DLSw should attempt to connect this link station. If this information is not available, a value of zero for this object should be retu… |
| 1.3.6.1.4.1.9.10.9.1.6.2.1.6 | ColumnciscoDlswSdlcLsRemoteSap | read-only | current | The SAP of the remote station to which this link station should be connected. If this information is not available, a length of zero for this object should be … |
| 1.3.6.1.4.1.9.10.9.1.6.2.1.7 | ColumnciscoDlswSdlcLsRowStatus | read-only | current | This object is used by a Management Station to create or delete the row entry in the ciscoDlswSdlcLsTable following the RowStatus textual convention. |
| 1.3.6.1.4.1.9.10.9.1.7 | NodeciscoDlswTraps | |||
| 1.3.6.1.4.1.9.10.9.1.7.1 | NotificationciscoDlswTrapTConnPartnerReject | current | This trap is sent each time a transport connection is rejected by a partner DLSw during Capabilities Exchanges. | |
| 1.3.6.1.4.1.9.10.9.1.7.2 | NotificationciscoDlswTrapTConnProtViolation | current | This trap is sent each time a protocol violation is detected for a transport connection. | |
| 1.3.6.1.4.1.9.10.9.1.7.3 | NotificationciscoDlswTrapTConnUp | current | This trap is sent each time a transport connection enters `connected' state. | |
| 1.3.6.1.4.1.9.10.9.1.7.4 | NotificationciscoDlswTrapTConnDown | current | This trap is sent each time a transport connection enters `disconnected' state. | |
| 1.3.6.1.4.1.9.10.9.1.7.5 | NotificationciscoDlswTrapCircuitUp | current | This trap is sent each time a circuit enters `connected' state. | |
| 1.3.6.1.4.1.9.10.9.1.7.6 | NotificationciscoDlswTrapCircuitDown | current | This trap is sent each time a circuit enters `disconnected' state. | |
| 1.3.6.1.4.1.9.10.9.2 | NodeciscoDlswDomains | |||
| 1.3.6.1.4.1.9.10.9.2.1 | NodeciscoDlswTCPDomain | |||
| 1.3.6.1.4.1.9.10.9.3 | NodeciscoDlswConformance | |||
| 1.3.6.1.4.1.9.10.9.3.1 | NodeciscoDlswCompliances | |||
| 1.3.6.1.4.1.9.10.9.3.1.1 | ComplianceciscoDlswCoreCompliance | obsolete | The core compliance statement for all DLSw nodes. | |
| 1.3.6.1.4.1.9.10.9.3.1.2 | ComplianceciscoDlswDirCompliance | obsolete | ||
| 1.3.6.1.4.1.9.10.9.3.1.3 | ComplianceciscoDlswDirLocateCompliance | current | ||
| 1.3.6.1.4.1.9.10.9.3.1.4 | ComplianceciscoDlswSdlcCompliance | obsolete | ||
| 1.3.6.1.4.1.9.10.9.3.1.5 | ComplianceciscoDlswCoreComplianceV11R01 | current | The core compliance statement for all DLSw nodes. | |
| 1.3.6.1.4.1.9.10.9.3.1.6 | ComplianceciscoDlswDirComplianceV11R01 | current | ||
| 1.3.6.1.4.1.9.10.9.3.1.7 | ComplianceciscoDlswSdlcComplianceV11R01 | current | ||
| 1.3.6.1.4.1.9.10.9.3.2 | NodeciscoDlswGroups | |||
| 1.3.6.1.4.1.9.10.9.3.2.1 | GroupciscoDlswNodeGroup | current | ||
| 1.3.6.1.4.1.9.10.9.3.2.2 | GroupciscoDlswNodeNBGroup | current | ||
| 1.3.6.1.4.1.9.10.9.3.2.3 | GroupciscoDlswTConnStatGroup | current | ||
| 1.3.6.1.4.1.9.10.9.3.2.4 | GroupciscoDlswTConnConfigGroup | current | ||
| 1.3.6.1.4.1.9.10.9.3.2.5 | GroupciscoDlswTConnOperGroup | current | ||
| 1.3.6.1.4.1.9.10.9.3.2.6 | GroupciscoDlswTConnNBGroup | current | ||
| 1.3.6.1.4.1.9.10.9.3.2.7 | GroupciscoDlswInterfaceGroup | current | ||
| 1.3.6.1.4.1.9.10.9.3.2.8 | GroupciscoDlswDirGroup | current | ||
| 1.3.6.1.4.1.9.10.9.3.2.9 | GroupciscoDlswDirNBGroup | current | ||
| 1.3.6.1.4.1.9.10.9.3.2.10 | GroupciscoDlswDirLocateGroup | current | ||
| 1.3.6.1.4.1.9.10.9.3.2.11 | GroupciscoDlswDirLocateNBGroup | current | ||
| 1.3.6.1.4.1.9.10.9.3.2.12 | GroupciscoDlswCircuitGroup | current | ||
| 1.3.6.1.4.1.9.10.9.3.2.13 | GroupciscoDlswSdlcGroup | current | ||
| 1.3.6.1.4.1.9.10.9.3.2.15 | GroupciscoDlswTConnTcpConfigGroup | current | ||
| 1.3.6.1.4.1.9.10.9.3.2.16 | GroupciscoDlswTConnTcpOperGroup | current | ||
| 1.3.6.1.4.1.9.10.9.3.2.17 | GroupciscoDlswCircuitStatGroup | current |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DlcType | INTEGER { other (1), na (2), llc (3), sdlc (4), qllc (5) } | current | Representing the type of DLC of an end station, if applicable. |
| DlswTimeStamp | TimeTicks | current | The value of dlwsUpTime when the event of interest occurred. |
| EndStationLocation | INTEGER { other (1), internal (2), remote (3), local (4) } | current | Representing the location of an end station related to the managed DLSw node. |
| LFSize | INTEGER { lfs516(516), lfs635(635), lfs754(754), lfs873(873), lfs993(993), lfs1112(1112), lfs1231(1231), lfs1350(1350), lfs1470(1470), lfs1542(1542), lfs1615(1615), lfs1688(1688), lfs1761(1761), lfs1833(1833), lfs1906(1906), lfs1979(1979), lfs2052(2052), lfs2345(2345), lfs2638(2638), lfs2932(2932), lfs3225(3225), lfs3518(3518), lfs3812(3812), lfs4105(4105), lfs4399(4399), lfs4865(4865), lfs5331(5331), lfs5798(5798), lfs6264(6264), lfs6730(6730), lfs7197(7197), lfs7663(7663), lfs8130(8130), lfs8539(8539), lfs8949(8949), lfs9358(9358), lfs9768(9768), lfs10178(10178), lfs10587(10587), lfs10997(10997), lfs11407(11407), lfs12199(12199), lfs12992(12992), lfs13785(13785), lfs14578(14578), lfs15370(15370), lfs16163(16163), lfs16956(16956), lfs17749(17749), lfs20730(20730), lfs23711(23711), lfs26693(26693), lfs29674(29674), lfs32655(32655), lfs38618(38618), lfs41600(41600), lfs44591(44591), lfs47583(47583), lfs50575(50575), lfs53567(53567), lfs56559(56559), lfs59551(59551), lfs65535(65535) } | current | The largest size of the INFO field (including DLC header, not including any MAC-level or framing octets). 64 valid values as defined by the IEEE 802.1D Addendum are acceptable. |
| MacAddress | OCTET STRING (SIZE (0 | 6)) | current | Represents an 802 MAC address represented in non-canonical format. That is, the most significant bit will be transmitted first. |
| NBName | OCTET STRING (SIZE (0..16)) | current | Represents a single qualified NetBIOS name, which can include `don't care' and `wildcard' characters to represent a number of real NetBIOS names. If an individual character position in the qualified name contains a `?',… |
| TAddress | OCTET STRING (SIZE (4)) | current | Denotes a transport service address. For ciscoDlswTCPDomain, a TAddress is 4 octets long, containing the IP-address in network-byte order. |