CISCO-FC-FE-MIB
348 objects
This is the Cisco fibre element management MIB module. It covers: - Cisco extension to the interface MIB ( IF-MIB ) - Contains all the groups from FIBRE-CHANNEL-FE-MIB relevant to Cisco fabric. - Other features specific to Cisco fabric. This MIB supports all the port types defined by the textual convention FcPortTypes. In addition it also supports Nx_port, where Nx_port can be either N_port or NL_port. The FC standards define Interconnect_Ports to be E_ports or B_Ports. This MIB supports Port Channel ports. Port Channel port is a single logical port, which contains multiple physical ports as its members. Presently only E_ports can be a member of Port Channel port. In addition it provides GigE and port channel information for all the Gigabit Ethernet (GigE) ports in the fabric. Terminology ELP : Exchange Link parameters EPP : Exchange Peer Parameters.
Imported Objects
| CISCO-IF-EXTENSION-MIB | cieIfOperStatusCause |
| CISCO-SMI | ciscoMgmt |
| CISCO-ST-TC | FcAddressId FcClassOfServices FcIfServiceStateType FcIfSpeed FcNameId FcPortModuleTypes FcPortTxTypes FcPortTypes |
| CISCO-TC | CiscoMilliSeconds MicroSeconds |
| CISCO-VSAN-MIB | vsanIndex |
| CISCO-ZS-MIB | FcList |
| ENTITY-MIB | entPhysicalIndex |
| IF-MIB | ifIndex InterfaceIndexOrZero |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.289 | IdentityciscoFcFeMIB | This is the Cisco fibre element management MIB module. It covers: - Cisco extension to the interface MIB ( IF-MIB ) - Contains all the groups from FIBRE-CHANNE… | ||
| 1.3.6.1.4.1.9.9.289.1 | NodeciscoFcFeObjects | |||
| 1.3.6.1.4.1.9.9.289.1.1 | NodecffFcFeConfig | |||
| 1.3.6.1.4.1.9.9.289.1.1.1 | ScalarcffFcFeElementName | read-write | current | The World-Wide Name of this fabric element. It's a 64-bit identifier and is unique worldwide. |
| 1.3.6.1.4.1.9.9.289.1.1.2 | TablefcIfTable | not-accessible | current | This table contains one entry per fibre channel switch port interface. Each entry holds the port interface parameters. The entries are created by the fabric sw… |
| 1.3.6.1.4.1.9.9.289.1.1.2.1 | RowfcIfEntry | not-accessible | current | Each entry contains FC-port configuration parameters and state information. |
| 1.3.6.1.4.1.9.9.289.1.1.2.1.1 | ColumnfcIfWwn | read-only | current | The World-Wide Name of this FC-Port. It's a 64-bit identifier and is unique worldwide. |
| 1.3.6.1.4.1.9.9.289.1.1.2.1.2 | ColumnfcIfAdminMode | read-write | current | The port mode configured by the user. If the user configured the port as auto(1), then the port initialization scheme determines the mode of the port. In this … |
| 1.3.6.1.4.1.9.9.289.1.1.2.1.3 | ColumnfcIfOperMode | read-only | current | The current operating mode of the port. This object will also be an additional varbind sent in the linkUp notification ( defined in IF-MIB ) in addition to the… |
| 1.3.6.1.4.1.9.9.289.1.1.2.1.4 | ColumnfcIfAdminSpeed | read-write | current | The port speed configured by the user. If this interface is a member of a port channel port then this object cannot be modified. Since this is a characteristic… |
| 1.3.6.1.4.1.9.9.289.1.1.2.1.5 | ColumnfcIfBeaconMode | read-write | current | The Beacon mode configured by the user. If 'true', the Beacon mode is enabled. If 'false', the beacon mode is disabled. In Beacon mode, an interface LED is put… |
| 1.3.6.1.4.1.9.9.289.1.1.2.1.6 | ColumnfcIfPortChannelIfIndex | read-only | current | The ifIndex of the port channel port this port belongs to. A value of zero indicates that this port is not part of any port channel. For port channel port this… |
| 1.3.6.1.4.1.9.9.289.1.1.2.1.7 | ColumnfcIfOperStatusCause | read-only | current | The cause of current operational state of the port. The current operational state of the port is shown by the 'ifOperStatus' defined in IF-MIB. This object wil… |
| 1.3.6.1.4.1.9.9.289.1.1.2.1.8 | ColumnfcIfOperStatusCauseDescr | read-only | current | The description for the cause of current operational state of the port, shown by the object 'fcIfOperStatusCause'. |
| 1.3.6.1.4.1.9.9.289.1.1.2.1.9 | ColumnfcIfAdminTrunkMode | read-write | current | The trunking mode configured by the user. When set to 'nonTrunk(1)', the port negotiates and converts the link into non-trunking mode. This port and the neighb… |
| 1.3.6.1.4.1.9.9.289.1.1.2.1.10 | ColumnfcIfOperTrunkMode | read-only | current | The current trunking mode of the port. |
| 1.3.6.1.4.1.9.9.289.1.1.2.1.11 | ColumnfcIfAllowedVsanList2k | read-write | current | The list of VSANs (in the range 0 through 2047) which are allowed to be received/transmitted on the port when the port is operating in trunking mode. Only port… |
| 1.3.6.1.4.1.9.9.289.1.1.2.1.12 | ColumnfcIfAllowedVsanList4k | read-write | current | The list of VSANs (in the range 2048 to 4096 ) which are allowed to be received/transmitted on the port when the port is operating in trunking mode. Only ports… |
| 1.3.6.1.4.1.9.9.289.1.1.2.1.13 | ColumnfcIfActiveVsanList2k | read-only | current | The list of VSANs (in the range 0 through 2047) this port is associated with. Only ports operating in trunk mode can belong to multiple VSANs. Each octet withi… |
| 1.3.6.1.4.1.9.9.289.1.1.2.1.14 | ColumnfcIfActiveVsanList4k | read-only | current | The list of VSANs (in the range 2048 through 4096) this port is associated with. Only ports operating in trunk mode can belong to multiple VSANs. Each octet wi… |
| 1.3.6.1.4.1.9.9.289.1.1.2.1.15 | ColumnfcIfBbCreditModel | read-only | current | The BB_Credit model used by the FC-port. The alternate BB_Credit management model can be used in the arbitrated loop topology to manage the flow of frames betw… |
| 1.3.6.1.4.1.9.9.289.1.1.2.1.16 | ColumnfcIfHoldTime | read-only | current | The maximum time that the FC-Port shall hold a frame in the transmitter buffer before discarding it, if it is unable to deliver the frame. The value 0 in this … |
| 1.3.6.1.4.1.9.9.289.1.1.2.1.17 | ColumnfcIfTransmitterType | read-only | current | The technology of the port transceiver. Since this is a characteristic of a physical port, this object is not applicable for Port Channel ports, i.e., the valu… |
| 1.3.6.1.4.1.9.9.289.1.1.2.1.18 | ColumnfcIfConnectorType | read-only | current | The module type of the port connector. This object refers to the hardware implementation of the port. It will be 'embedded' if the hardware equivalent to Gigab… |
| 1.3.6.1.4.1.9.9.289.1.1.2.1.19 | ColumnfcIfSerialNo | read-only | current | The serial number of the connector unit ( e.g., for a GBIC ). If this is not applicable, return a zero-length string. Since this is a characteristic of a physi… |
| 1.3.6.1.4.1.9.9.289.1.1.2.1.20 | ColumnfcIfRevision | read-only | current | The port revision of the connector unit (e.g., for a GBIC). If this is not applicable it returns a zero-length string. Since this is a characteristic of a phys… |
| 1.3.6.1.4.1.9.9.289.1.1.2.1.21 | ColumnfcIfVendor | read-only | current | The connector unit ( e.g., for a GBIC ) vendor. If this is not applicable it returns a zero-length string. Since this is a characteristic of a physical port, t… |
| 1.3.6.1.4.1.9.9.289.1.1.2.1.22 | ColumnfcIfSFPSerialIDData | read-only | current | The connector unit ( e.g., for a GBIC ) Serial ID data. If this is not applicable it returns a zero-length string. Since this is a characteristic of a physical… |
| 1.3.6.1.4.1.9.9.289.1.1.2.1.23 | ColumnfcIfPartNumber | read-only | current | The connector unit ( e.g., for a GBIC ) part number. If this is not applicable it returns a zero-length string. Since this is a characteristic of a physical po… |
| 1.3.6.1.4.1.9.9.289.1.1.2.1.24 | ColumnfcIfAdminRxBbCredit | read-write | current | The receive buffer-to-buffer credits configured for this port. If the value configured is zero, then the value of the object fcIfCapOsmRxBbCreditDefault or fcI… |
| 1.3.6.1.4.1.9.9.289.1.1.2.1.25 | ColumnfcIfAdminRxBbCreditModeISL | read-write | current | The receive buffer-to-buffer credits configured for this port to be used if it is operating in xE_port mode. NOTE: The value of this object is not used if cfcF… |
| 1.3.6.1.4.1.9.9.289.1.1.2.1.26 | ColumnfcIfAdminRxBbCreditModeFx | read-write | current | The receive buffer-to-buffer credits configured for this port to be used if it is operating in Fx mode. NOTE: The value of this object is not used if cfcFeatur… |
| 1.3.6.1.4.1.9.9.289.1.1.2.1.27 | ColumnfcIfOperRxBbCredit | read-only | current | The receive buffer-to-buffer credits configured for the operational port mode. |
| 1.3.6.1.4.1.9.9.289.1.1.2.1.28 | ColumnfcIfRxDataFieldSize | read-write | current | The largest Data_Field size for an FT_1 frame that can be received by this port. |
| 1.3.6.1.4.1.9.9.289.1.1.2.1.29 | ColumnfcIfActiveVsanUpList2k | read-only | current | The list of VSANs (in the range 0 through 2047) whose operational state is 'up', that this port is associated with. Only ports operating in trunk mode can be a… |
| 1.3.6.1.4.1.9.9.289.1.1.2.1.30 | ColumnfcIfActiveVsanUpList4k | read-only | current | The list of VSANs (in the range 2048 to 4096 ) whose operational state is 'up', that this port is associated with. Only ports operating in trunk mode can be as… |
| 1.3.6.1.4.1.9.9.289.1.1.2.1.31 | ColumnfcIfPortRateMode | read-write | current | The rate of data traffic supported by this port. 'dedicated' - this interface is operating in dedicated rate mode. In dedicated rate mode each interface has an… |
| 1.3.6.1.4.1.9.9.289.1.1.2.1.32 | ColumnfcIfAdminRxPerfBuffer | read-write | current | The performance buffers configured for this port. These buffers in addition to the buffer-to-buffer credits are used to improve the performance of a port, henc… |
| 1.3.6.1.4.1.9.9.289.1.1.2.1.33 | ColumnfcIfOperRxPerfBuffer | read-only | current | The performance buffers presently operational on this port. |
| 1.3.6.1.4.1.9.9.289.1.1.2.1.34 | ColumnfcIfBbScn | read-only | current | The buffer-to-buffer state change number operational on this interface. |
| 1.3.6.1.4.1.9.9.289.1.1.2.1.35 | ColumnfcIfPortInitStatus | read-only | current | If 'true', this port successfully completed a link initialization or there was an error during link initialization. If 'false', this port did not perform succe… |
| 1.3.6.1.4.1.9.9.289.1.1.2.1.36 | ColumnfcIfAdminRxBbCreditExtended | read-write | current | This object specifies the extended BB credits that can be configured on an FC port (in the range 256 through 4095). The acceptable value depends on the BB cred… |
| 1.3.6.1.4.1.9.9.289.1.1.2.1.37 | ColumnfcIfFcTunnelIfIndex | read-write | current | This object specifies the ifIndex of a FC tunnel that represents a logical Fibre Channel data path between a source switch and destination switch. RSPAN uses a… |
| 1.3.6.1.4.1.9.9.289.1.1.2.1.38 | ColumnfcIfServiceState | read-write | current | The service state of the interface. Some but not all interfaces, e.g., those on hardware modules with a capability of supporting shared resources, can have the… |
| 1.3.6.1.4.1.9.9.289.1.1.2.1.39 | ColumnfcIfAdminBbScnMode | read-write | current | The Buffer-to-buffer State Change Number (BB_SC_N) field (word 1, bits 15-12) specifies the Buffer-to-buffer State Change Number. It indicates that the sender … |
| 1.3.6.1.4.1.9.9.289.1.1.2.1.40 | ColumnfcIfPortType | read-only | current | Indicates whether this interface is internal orexternal interface on the chassis. internal(1) - This type of interface is not accessible via an externally-moun… |
| 1.3.6.1.4.1.9.9.289.1.1.2.1.41 | ColumnfcIfAdminFECState | read-write | current | The port FEC state configured by the user. When set to up(1), the port negotiates and converts the link into operational FEC up only if the neighboring port fc… |
| 1.3.6.1.4.1.9.9.289.1.1.2.1.42 | ColumnfcIfOperFECState | read-only | current | The current operating FEC state of the port.The value is down(2) by default. If fcIfAdminFECState is up(1) for a physical port, the port negotiates and convert… |
| 1.3.6.1.4.1.9.9.289.1.1.2.1.43 | ColumnfcIfAdminFecTtsState | read-write | current | The port FEC (Forward Error Correction) TTS (Transmitter Training Signal) state configured by the user. When set to up, it enables TTS allowing negotiation of … |
| 1.3.6.1.4.1.9.9.289.1.1.2.1.44 | ColumnfcIfOperFecTtsState | read-only | current | The current operating FEC TTS state of the port. The value is down by default. For fcIfOperFecTtsState to come up, both fcIfAdminFECState and fcIfAdminFecTtsSt… |
| 1.3.6.1.4.1.9.9.289.1.1.2.1.45 | ColumnfcIfTransceiverPower | read-only | current | The current transceiver power status for the interface. |
| 1.3.6.1.4.1.9.9.289.1.1.2.1.46 | ColumnfcIfTransceiverPowerControl | read-only | current | The transceiver power control setting for the interface. |
| 1.3.6.1.4.1.9.9.289.1.1.3 | TablefcTrunkIfTable | not-accessible | current | This table contains one entry for each trunking fibre channel port per VSAN. When the FC-port goes into trunking mode, the fibre channel switch creates one ent… |
| 1.3.6.1.4.1.9.9.289.1.1.3.1 | RowfcTrunkIfEntry | not-accessible | current | Each entry contains trunking FC-port parameters. |
| 1.3.6.1.4.1.9.9.289.1.1.3.1.1 | ColumnfcTrunkIfOperStatus | read-only | current | The operational state of a VSAN on this port. If the port is in trunking mode, it is possible that the port state may be 'down(2)' only in some VSANs. If this … |
| 1.3.6.1.4.1.9.9.289.1.1.3.1.2 | ColumnfcTrunkIfOperStatusCause | read-only | current | The cause of current operational state of the port. The current operational state of the port is shown by the 'fcTrunkIfOperStatus'. This object will show 'non… |
| 1.3.6.1.4.1.9.9.289.1.1.3.1.3 | ColumnfcTrunkIfOperStatusCauseDescr | read-only | current | The description for the cause of current operational state of the port, shown by the object 'fcTrunkIfOperStatusCause'. |
| 1.3.6.1.4.1.9.9.289.1.1.4 | ScalarfcIfLoginEntryCount | read-only | current | The number of login entries in fcIfFLoginTable. |
| 1.3.6.1.4.1.9.9.289.1.1.5 | TablefcIfFLoginTable | not-accessible | current | This table contains, one entry for each Nx_Port attached to a particular FC-port in this VSAN in the Fabric element. Each entry contains services parameters es… |
| 1.3.6.1.4.1.9.9.289.1.1.5.1 | RowfcIfFLoginEntry | not-accessible | current | An entry containing service parameters established by a successful Fabric Login to the port indicated by ifIndex. |
| 1.3.6.1.4.1.9.9.289.1.1.5.1.1 | ColumnfcIfNxLoginIndex | not-accessible | current | An arbitrary value identifying the associated Nx_Port in the attachment for which the entry contains information. |
| 1.3.6.1.4.1.9.9.289.1.1.5.1.2 | ColumnfcIfNxPortNodeName | read-only | current | The world wide name of the Remote Node the logged-in Nx_Port belongs to. |
| 1.3.6.1.4.1.9.9.289.1.1.5.1.3 | ColumnfcIfNxPortName | read-only | current | The world wide name of the logged-in Nx_Port. |
| 1.3.6.1.4.1.9.9.289.1.1.5.1.4 | ColumnfcIfNxPortAddress | read-only | current | The address identifier that has been assigned to the logged-in Nx_Port. |
| 1.3.6.1.4.1.9.9.289.1.1.5.1.5 | ColumnfcIfNxFcphVersionAgreed | read-only | current | The version of FC-PH that the Fx_Port has agreed to support from the Fabric Login. |
| 1.3.6.1.4.1.9.9.289.1.1.5.1.6 | ColumnfcIfNxRxBbCredit | read-only | current | The maximum number of receive buffers available for holding Class 2, Class 3 received from the logged-in Nx_Port. It is for buffer-to-buffer flow control in th… |
| 1.3.6.1.4.1.9.9.289.1.1.5.1.7 | ColumnfcIfNxTxBbCredit | read-only | current | The total number of buffers available for holding Class 2, Class 3 frames to be transmitted to the logged-in Nx_Port. It is for buffer-to-buffer flow control i… |
| 1.3.6.1.4.1.9.9.289.1.1.5.1.8 | ColumnfcIfNxClass2RxDataFieldSize | read-only | current | The Class 2 Receive Data Field Size of the logged-in Nx_Port. This object specifies the largest Data Field Size for an FT_1 frame that can be received by the N… |
| 1.3.6.1.4.1.9.9.289.1.1.5.1.9 | ColumnfcIfNxClass3RxDataFieldSize | read-only | current | The Class 3 Receive Data Field Size of the logged-in Nx_Port. This object specifies the largest Data Field Size for an FT_1 frame that can be received by the N… |
| 1.3.6.1.4.1.9.9.289.1.1.5.1.10 | ColumnfcIfNxCosSuppAgreed | read-only | current | The object indicating the classes of services that the logged-in Nx_Port has requested the FC-Port to support and the FC-Port has granted the request. |
| 1.3.6.1.4.1.9.9.289.1.1.5.1.11 | ColumnfcIfNxClass2SeqDelivAgreed | read-only | current | The object indicating whether the FC-Port has agreed to support Class 2 sequential delivery during the Fabric Login. This is meaningful only if Class 2 service… |
| 1.3.6.1.4.1.9.9.289.1.1.5.1.12 | ColumnfcIfNxClass3SeqDelivAgreed | read-only | current | The flag indicating whether the Fx_Port has agreed to support Class 3 sequential delivery during the Fabric Login. This is meaningful only if Class 3 service h… |
| 1.3.6.1.4.1.9.9.289.1.1.6 | TablefcIfElpTable | not-accessible | current | This table contains, one entry for each local Interconnect_Port that has performed Exchange Link Parameters Switch Fabric Internal Link Service exchange with i… |
| 1.3.6.1.4.1.9.9.289.1.1.6.1 | RowfcIfElpEntry | not-accessible | current | An entry containing Exchange Link parameters established between the Interconnect_Port indicated by ifIndex and the peer Interconnect_Port indicated by fcIfElp… |
| 1.3.6.1.4.1.9.9.289.1.1.6.1.1 | ColumnfcIfElpNbrNodeName | read-only | current | The node world wide name of the peer Node. |
| 1.3.6.1.4.1.9.9.289.1.1.6.1.2 | ColumnfcIfElpNbrPortName | read-only | current | The port world wide name of the peer Interconnect_Port. |
| 1.3.6.1.4.1.9.9.289.1.1.6.1.3 | ColumnfcIfElpRxBbCredit | read-only | current | The maximum number of receive buffers available for holding Class 2, Class 3, Class F frames received from the peer Interconnect_Port. It is for buffer-to-buff… |
| 1.3.6.1.4.1.9.9.289.1.1.6.1.4 | ColumnfcIfElpTxBbCredit | read-only | current | The total number of buffers available for holding Class 2, Class 3, Class F frames to be transmitted to the peer Interconnect_Port. It is for buffer-to-buffer … |
| 1.3.6.1.4.1.9.9.289.1.1.6.1.5 | ColumnfcIfElpCosSuppAgreed | read-only | current | The object indicating the classes of services that the peer Interconnect_Port has requested the local Interconnect_Port to support and the local Interconnect_P… |
| 1.3.6.1.4.1.9.9.289.1.1.6.1.6 | ColumnfcIfElpClass2SeqDelivAgreed | read-only | current | The object indicating whether the local Interconnect_Port has agreed to support Class 2 sequential delivery during the Exchange Link Parameters Switch Fabric I… |
| 1.3.6.1.4.1.9.9.289.1.1.6.1.7 | ColumnfcIfElpClass2RxDataFieldSize | read-only | current | The Class 2 Receive Data Field Size of the peer Interconnect_Port. This object specifies the largest Data Field Size for an FT_1 frame that can be received by … |
| 1.3.6.1.4.1.9.9.289.1.1.6.1.8 | ColumnfcIfElpClass3SeqDelivAgreed | read-only | current | The object indicating whether the local Interconnect_Port has agreed to support Class 3 sequential delivery during the Exchange Link Parameters Switch Fabric I… |
| 1.3.6.1.4.1.9.9.289.1.1.6.1.9 | ColumnfcIfElpClass3RxDataFieldSize | read-only | current | The Class 3 Receive Data Field Size of the peer Interconnect_Port. This object specifies the largest Data Field Size for an FT_1 frame that can be received by … |
| 1.3.6.1.4.1.9.9.289.1.1.6.1.10 | ColumnfcIfElpClassFXII | read-only | current | The object when true(1) indicates that the peer Interconnect_Port supplying this parameter requires that an interlock be used during X_ID assignment in Class F… |
| 1.3.6.1.4.1.9.9.289.1.1.6.1.11 | ColumnfcIfElpClassFRxDataFieldSize | read-only | current | The Class F Receive Data Field Size of the peer Interconnect_Port. Class F service is always agreed between two Interconnect_Ports, and thus this object is alw… |
| 1.3.6.1.4.1.9.9.289.1.1.6.1.12 | ColumnfcIfElpClassFConcurrentSeq | read-only | current | The object indicating the number of sequence status blocks provided by the Interconnect_Port supplying the parameters for tracking the progress of a sequence a… |
| 1.3.6.1.4.1.9.9.289.1.1.6.1.13 | ColumnfcIfElpClassFEndToEndCredit | read-only | current | The object indicating the maximum number of Class F data frames which can be transmitted by an Interconnect_Port without receipt of accompanying ACK or Link_Re… |
| 1.3.6.1.4.1.9.9.289.1.1.6.1.14 | ColumnfcIfElpClassFOpenSeq | read-only | current | The value of the open sequences per exchange shall specify the maximum number of sequences that can be open at one time at the recipient between a pair of Inte… |
| 1.3.6.1.4.1.9.9.289.1.1.7 | TablefcIfCapTable | not-accessible | current | This table contains, one entry for each FC-Port. It contains information describing about what each FC-port is inherently capable in its current configuration … |
| 1.3.6.1.4.1.9.9.289.1.1.7.1 | RowfcIfCapEntry | not-accessible | current | Each entry contains the Capability of a FC-Port. |
| 1.3.6.1.4.1.9.9.289.1.1.7.1.1 | ColumnfcIfCapFcphVersionHigh | read-only | current | The highest version of FC-PH that the FC-Port is capable of supporting. |
| 1.3.6.1.4.1.9.9.289.1.1.7.1.2 | ColumnfcIfCapFcphVersionLow | read-only | current | The lowest version of FC-PH that the FC-Port is capable of supporting. |
| 1.3.6.1.4.1.9.9.289.1.1.7.1.3 | ColumnfcIfCapRxBbCreditMax | read-only | deprecated | The maximum number of receive buffers the port hardware is capable of receiving from the attached Nx_Port. This object is applicable to ports operating in Fx m… |
| 1.3.6.1.4.1.9.9.289.1.1.7.1.4 | ColumnfcIfCapRxBbCreditMin | read-only | deprecated | The minimum number of receive buffers the port hardware is capable of receiving from the attached Nx_Port. This object is applicable to ports operating in Fx m… |
| 1.3.6.1.4.1.9.9.289.1.1.7.1.5 | ColumnfcIfCapRxDataFieldSizeMax | read-only | current | The maximum size in bytes of the Data Field in a frame that the FC-Port is capable of receiving from its attached FC-port. |
| 1.3.6.1.4.1.9.9.289.1.1.7.1.6 | ColumnfcIfCapRxDataFieldSizeMin | read-only | current | The minimum size in bytes of the Data Field in a frame that the FC-Port is capable of receiving from its attached FC-port. |
| 1.3.6.1.4.1.9.9.289.1.1.7.1.7 | ColumnfcIfCapCos | read-only | current | The Bit mask indicating the set of Classes of Service that the FC-Port is capable of supporting. |
| 1.3.6.1.4.1.9.9.289.1.1.7.1.8 | ColumnfcIfCapClass2SeqDeliv | read-only | current | The flag indicating whether or not the FC-Port is capable of supporting Class 2 Sequential Delivery. |
| 1.3.6.1.4.1.9.9.289.1.1.7.1.9 | ColumnfcIfCapClass3SeqDeliv | read-only | current | The flag indicating whether or not the FC-Port is capable of supporting Class 3 Sequential Delivery. |
| 1.3.6.1.4.1.9.9.289.1.1.7.1.10 | ColumnfcIfCapHoldTimeMax | read-only | current | The maximum holding time ( in microseconds ) that the FC-Port is capable of supporting. |
| 1.3.6.1.4.1.9.9.289.1.1.7.1.11 | ColumnfcIfCapHoldTimeMin | read-only | current | The minimum holding time ( in microseconds ) that the FC-Port is capable of supporting. |
| 1.3.6.1.4.1.9.9.289.1.1.7.1.12 | ColumnfcIfCapISLRxBbCreditMax | read-only | deprecated | The maximum number of receive buffers the port hardware is capable of receiving from the attached Inter Connect port. This object is applicable to ports operat… |
| 1.3.6.1.4.1.9.9.289.1.1.7.1.13 | ColumnfcIfCapISLRxBbCreditMin | read-only | deprecated | The minimum number of receive buffers the port hardware is capable of receiving from the attached xE_port or B_port. This object is applicable to ports operati… |
| 1.3.6.1.4.1.9.9.289.1.1.7.1.14 | ColumnfcIfCapRxBbCreditWriteable | read-only | deprecated | The value indicating whether the port is capable of allowing the user to configure receive buffer to buffer credit. The values configured for the objects: fcIf… |
| 1.3.6.1.4.1.9.9.289.1.1.7.1.15 | ColumnfcIfCapRxBbCreditDefault | read-only | deprecated | The default receive buffer-to-buffer credits if the port is operating in Fx mode. |
| 1.3.6.1.4.1.9.9.289.1.1.7.1.16 | ColumnfcIfCapISLRxBbCreditDefault | read-only | deprecated | The default receive buffer-to-buffer credits if the port is operating in xE_port mode. |
| 1.3.6.1.4.1.9.9.289.1.1.7.1.17 | ColumnfcIfCapBbScnCapable | read-only | current | Indicates whether this interface is capable of handling buffer-to-buffer state change number. 'true' : capable of handling. 'false' : it is not capable of hand… |
| 1.3.6.1.4.1.9.9.289.1.1.7.1.18 | ColumnfcIfCapBbScnMax | read-only | current | The maximum buffer-to-buffer state change number this interface can handle. |
| 1.3.6.1.4.1.9.9.289.1.1.7.1.19 | ColumnfcIfCapOsmFrmCapable | read-only | current | This value indicates whether this interface is capable to operate in different port rate modes. 'true' : the port is capable of being configured with the mode … |
| 1.3.6.1.4.1.9.9.289.1.1.7.1.20 | ColumnfcIfIsServiceStateCapable | read-only | current | Indicates whether this interface is capable of handling service state change. 'true' : capable of changing the service state of the interface. This means that … |
| 1.3.6.1.4.1.9.9.289.1.1.7.1.21 | ColumnfcIfIsPortRateModeCapable | read-only | current | Indicates whether this interface is capable of being configured in either of 'dedicated' or 'shared' port rate modes. 'true' : capable of changing the port rat… |
| 1.3.6.1.4.1.9.9.289.1.1.7.1.22 | ColumnfcIfIsAdminRxBbCreditExtendedCapable | read-only | current | Indicates whether extended buffer-to-buffer credit feature can be enabled on a given interface. 'true' : capable of changing the extended buffer-to-buffer cred… |
| 1.3.6.1.4.1.9.9.289.1.1.8 | ScalaradminTrunkProtocol | read-write | current | The object to either enable or disable the trunking protocol for the device. The trunking protocol is used for negotiating trunk mode and calculating operation… |
| 1.3.6.1.4.1.9.9.289.1.1.9 | ScalarfcIfElpRejectReasonCode | accessible-for-notify | current | The reason code for the ELP reject. |
| 1.3.6.1.4.1.9.9.289.1.1.10 | ScalarfcIfElpRejectReasonCodeExpl | accessible-for-notify | current | The reason code explanation for the ELP reject. |
| 1.3.6.1.4.1.9.9.289.1.1.11 | TablefcIfCapOsmTable | not-accessible | current | This table contains, one entry for each FC-Port which is capable of operating in over subscription port rate mode. It contains information describing about wha… |
| 1.3.6.1.4.1.9.9.289.1.1.11.1 | RowfcIfCapOsmEntry | not-accessible | current | Each entry contains the Capability of a FC-Port operating in over subscribed mode. |
| 1.3.6.1.4.1.9.9.289.1.1.11.1.1 | ColumnfcIfCapOsmRxBbCreditWriteable | read-only | current | The value indicating whether the port operating in over subscribed mode is capable of allowing the user to configure receive buffer to buffer credit. The value… |
| 1.3.6.1.4.1.9.9.289.1.1.11.1.2 | ColumnfcIfCapOsmRxBbCreditMax | read-only | current | The maximum number of receive buffers the port hardware is capable of receiving from the attached Nx_Port. This object is applicable to ports operating in Fx m… |
| 1.3.6.1.4.1.9.9.289.1.1.11.1.3 | ColumnfcIfCapOsmRxBbCreditMin | read-only | current | The minimum number of receive buffers the port hardware is capable of receiving from the attached Nx_Port. This object is applicable to ports operating in Fx m… |
| 1.3.6.1.4.1.9.9.289.1.1.11.1.4 | ColumnfcIfCapOsmRxBbCreditDefault | read-only | current | The default receive buffer-to-buffer credits if the port is operating in Fx mode. |
| 1.3.6.1.4.1.9.9.289.1.1.11.1.5 | ColumnfcIfCapOsmISLRxBbCreditMax | read-only | current | The maximum number of receive buffers the port hardware is capable of receiving from the attached Inter Connect port. This object is applicable to ports operat… |
| 1.3.6.1.4.1.9.9.289.1.1.11.1.6 | ColumnfcIfCapOsmISLRxBbCreditMin | read-only | current | The minimum number of receive buffers the port hardware is capable of receiving from the attached xE_port or B_port. This object is applicable to ports operati… |
| 1.3.6.1.4.1.9.9.289.1.1.11.1.7 | ColumnfcIfCapOsmISLRxBbCreditDefault | read-only | current | The default receive buffer-to-buffer credits if the port is operating in inter switch link mode. |
| 1.3.6.1.4.1.9.9.289.1.1.11.1.8 | ColumnfcIfCapOsmRxPerfBufWriteable | read-only | current | The value indicating whether the port is capable of allowing the user to configure receive performance buffers. The values configured for the objects: fcIfAdmi… |
| 1.3.6.1.4.1.9.9.289.1.1.11.1.9 | ColumnfcIfCapOsmRxPerfBufMax | read-only | current | The maximum number of performance buffers that can be configured for this port. The object is applicable to ports operating in Fx mode. |
| 1.3.6.1.4.1.9.9.289.1.1.11.1.10 | ColumnfcIfCapOsmRxPerfBufMin | read-only | current | The minimum number of performance buffers that can be configured for this port. The object is applicable to ports operating in Fx mode. |
| 1.3.6.1.4.1.9.9.289.1.1.11.1.11 | ColumnfcIfCapOsmRxPerfBufDefault | read-only | current | The default performance buffers if the port is operating in Fx mode. The object is applicable to ports operating in Fx mode. |
| 1.3.6.1.4.1.9.9.289.1.1.11.1.12 | ColumnfcIfCapOsmISLRxPerfBufMax | read-only | current | The maximum number of performance buffers that can be configured for this port. This object is applicable to inter switch link ports. |
| 1.3.6.1.4.1.9.9.289.1.1.11.1.13 | ColumnfcIfCapOsmISLRxPerfBufMin | read-only | current | The minimum number of performance buffers that can be configured for this port. This object is applicable to inter switch link ports. |
| 1.3.6.1.4.1.9.9.289.1.1.11.1.14 | ColumnfcIfCapOsmISLRxPerfBufDefault | read-only | current | The default performance buffers if the port is operating as an inter switch link port. |
| 1.3.6.1.4.1.9.9.289.1.1.12 | TablefcIfCapFrmTable | not-accessible | current | This table contains, one entry for each FC-Port which is capable of operating in Full Rate mode. It contains information describing about what each FC-port is … |
| 1.3.6.1.4.1.9.9.289.1.1.12.1 | RowfcIfCapFrmEntry | not-accessible | current | Each entry contains the Capability of a FC-Port operating in Full Rate mode. |
| 1.3.6.1.4.1.9.9.289.1.1.12.1.1 | ColumnfcIfCapFrmRxBbCreditWriteable | read-only | current | The value indicating whether the port operating in full rate mode is capable of allowing the user to configure receive buffer to buffer credit. The values conf… |
| 1.3.6.1.4.1.9.9.289.1.1.12.1.2 | ColumnfcIfCapFrmRxBbCreditMax | read-only | current | The maximum number of receive buffers the port hardware is capable of receiving from the attached Nx_Port. This object is applicable to ports operating in Fx m… |
| 1.3.6.1.4.1.9.9.289.1.1.12.1.3 | ColumnfcIfCapFrmRxBbCreditMin | read-only | current | The minimum number of receive buffers the port hardware is capable of receiving from the attached Nx_Port. This object is applicable to ports operating in Fx m… |
| 1.3.6.1.4.1.9.9.289.1.1.12.1.4 | ColumnfcIfCapFrmRxBbCreditDefault | read-only | current | The default receive buffer-to-buffer credits if the port is operating in Fx mode. |
| 1.3.6.1.4.1.9.9.289.1.1.12.1.5 | ColumnfcIfCapFrmISLRxBbCreditMax | read-only | current | The maximum number of receive buffers the port hardware is capable of receiving from the attached Inter Connect port. This object is applicable to ports operat… |
| 1.3.6.1.4.1.9.9.289.1.1.12.1.6 | ColumnfcIfCapFrmISLRxBbCreditMin | read-only | current | The minimum number of receive buffers the port hardware is capable of receiving from the attached xE_port or B_port. This object is applicable to ports operati… |
| 1.3.6.1.4.1.9.9.289.1.1.12.1.7 | ColumnfcIfCapFrmISLRxBbCreditDefault | read-only | current | The default receive buffer-to-buffer credits if the port is operating in inter switch link mode. |
| 1.3.6.1.4.1.9.9.289.1.1.12.1.8 | ColumnfcIfCapFrmRxPerfBufWriteable | read-only | current | The value indicating whether the port is capable of allowing the user to configure receive performance buffers. The values configured for the objects: fcIfAdmi… |
| 1.3.6.1.4.1.9.9.289.1.1.12.1.9 | ColumnfcIfCapFrmRxPerfBufMax | read-only | current | The maximum number of performance buffers that can be configured for this port. The object is applicable to ports operating in Fx mode. |
| 1.3.6.1.4.1.9.9.289.1.1.12.1.10 | ColumnfcIfCapFrmRxPerfBufMin | read-only | current | The minimum number of performance buffers that can be configured for this port. The object is applicable to ports operating in Fx mode. |
| 1.3.6.1.4.1.9.9.289.1.1.12.1.11 | ColumnfcIfCapFrmRxPerfBufDefault | read-only | current | The default performance buffers if the port is operating in Fx mode. The object is applicable to ports operating in Fx mode. |
| 1.3.6.1.4.1.9.9.289.1.1.12.1.12 | ColumnfcIfCapFrmISLRxPerfBufMax | read-only | current | The maximum number of performance buffers that can be configured for this port. This object is applicable to inter switch link ports. |
| 1.3.6.1.4.1.9.9.289.1.1.12.1.13 | ColumnfcIfCapFrmISLRxPerfBufMin | read-only | current | The minimum number of performance buffers that can be configured for this port. This object is applicable to inter switch link ports. |
| 1.3.6.1.4.1.9.9.289.1.1.12.1.14 | ColumnfcIfCapFrmISLRxPerfBufDefault | read-only | current | The default performance buffers if the port is operating as an inter switch link port. |
| 1.3.6.1.4.1.9.9.289.1.1.13 | TablefcIfRNIDInfoTable | not-accessible | current | A table listing the peer node identification data per port per VSAN. |
| 1.3.6.1.4.1.9.9.289.1.1.13.1 | RowfcIfRNIDInfoEntry | not-accessible | current | Each entry provides node identification data of the peer. This data is got through performing request-node-identification-data(RNID) extended link service. The… |
| 1.3.6.1.4.1.9.9.289.1.1.13.1.1 | ColumnfcIfRNIDInfoStatus | read-write | current | This object specifies the status of the row, is valid, invalid or old. The only value that can be assigned by the Network Management System(NMS) is invalid(2).… |
| 1.3.6.1.4.1.9.9.289.1.1.13.1.2 | ColumnfcIfRNIDInfoTypeNumber | read-only | current | The type number of the peer node. For example the type number could be 002105. |
| 1.3.6.1.4.1.9.9.289.1.1.13.1.3 | ColumnfcIfRNIDInfoModelNumber | read-only | current | The model number of the peer node. For example the model number could be F20. |
| 1.3.6.1.4.1.9.9.289.1.1.13.1.4 | ColumnfcIfRNIDInfoManufacturer | read-only | current | The name of the the company that manufactured the peer node. For example the Manufacturer info could be HTC. |
| 1.3.6.1.4.1.9.9.289.1.1.13.1.5 | ColumnfcIfRNIDInfoPlantOfMfg | read-only | current | The plant code that identifies the plant of manufacture of the peer node. For example the plant code of manufacture could be 00. |
| 1.3.6.1.4.1.9.9.289.1.1.13.1.6 | ColumnfcIfRNIDInfoSerialNumber | read-only | current | The sequence number assigned to the peer node during manufacturing. For example the serial number could be 000000023053. |
| 1.3.6.1.4.1.9.9.289.1.1.13.1.7 | ColumnfcIfRNIDInfoUnitType | read-only | current | The type of the peer node that this port is communicating. channel - Host controlUnit - Disk fabric - Another SAN switch unknown - if fcIfRNIDInfoStatus is 'in… |
| 1.3.6.1.4.1.9.9.289.1.1.13.1.8 | ColumnfcIfRNIDInfoPortId | read-only | current | The identifier of the port in the peer node connected to this port. If the peer node is a channel, as described by the instance of fcIfRNIDInfoUnitType, then f… |
| 1.3.6.1.4.1.9.9.289.1.1.14 | TablefcIfGigETable | not-accessible | current | This table contains one entry per fibre channel switch Gigabit Ethernet (GigE) interface. This table also provides an easy way to find out whether a GigE inter… |
| 1.3.6.1.4.1.9.9.289.1.1.14.1 | RowfcIfGigEEntry | not-accessible | current | Each entry contains GigE port configuration and state information. |
| 1.3.6.1.4.1.9.9.289.1.1.14.1.1 | ColumnfcIfGigEPortChannelIfIndex | read-only | current | The ifIndex of the ether channel port this GigE port belongs to. A value of zero indicates that this GigE port is not part of any port channel. For port channe… |
| 1.3.6.1.4.1.9.9.289.1.1.14.1.2 | ColumnfcIfGigEAutoNegotiate | read-write | current | This object Indicates whether auto-negotiation (of speed and duplex mode) should be used on this interface. |
| 1.3.6.1.4.1.9.9.289.1.1.14.1.3 | ColumnfcIfGigEBeaconMode | read-write | current | In Beacon mode, an interface LED is put into flashing mode for easy identification of a particular interface. The Beacon mode configured by the user. If 'true'… |
| 1.3.6.1.4.1.9.9.289.1.1.14.1.4 | ColumnfcIfGigConnectorType | read-only | current | The module type of the port connector. Since this is a characteristic of a physical port, this object is not applicable for Port Channel ports, i.e., the value… |
| 1.3.6.1.4.1.9.9.289.1.1.14.1.5 | ColumnfcIfGigEAdminSpeed | read-write | current | This object specifies the configured speed of IPStorage port. 'notApplicable' - The read-only value 'notApplicable' indicates that the speed change is not appl… |
| 1.3.6.1.4.1.9.9.289.1.1.14.1.6 | ColumnfcIfGigEOperStatusCause | read-only | current | This object indicates the cause of the current operational state of the ipstorage port. The current operational state of the port is shown by the 'ifOperStatus… |
| 1.3.6.1.4.1.9.9.289.1.1.14.1.7 | ColumnfcIfGigEServiceState | read-write | current | This object idicates the current operational state of the GigE interface. |
| 1.3.6.1.4.1.9.9.289.1.1.15 | TablefcIfModuleTable | not-accessible | current | This table is used for configuring the module specific features for Fibre Channel modules (or whatever equivalent). |
| 1.3.6.1.4.1.9.9.289.1.1.15.1 | RowfcIfModuleEntry | not-accessible | current | An entry in fcIfModuleTable. Each entry represents the module specific attributes. |
| 1.3.6.1.4.1.9.9.289.1.1.15.1.1 | ColumnfcIfModuleOverSubscriptionRatioConfig | read-write | current | This object helps the user to control the restriction on oversubscription ratio on modules that support it. enable(1) - Enables the restriction on oversubscrip… |
| 1.3.6.1.4.1.9.9.289.1.1.15.1.2 | ColumnfcIfModuleBandwidthFairnessConfig | read-write | current | This object helps the user to control bandwidth fairness on modules that support it. enable(1) - Enables the bandwidth fairness disable(2) - Disables the bandw… |
| 1.3.6.1.4.1.9.9.289.1.1.15.1.3 | ColumnfcIfModuleBandwidthFairnessOper | read-only | current | The operational status of bandwidth fairness on the module. enabled(1) - Bandwidth fairness is enabled on the module disabled(2) - Bandwidth fairness is disabl… |
| 1.3.6.1.4.1.9.9.289.1.1.15.1.4 | ColumnfcIfModuleXcvrFrequencyConfig | read-write | current | This object specifies the transceiver frequency of this module. notApplicable(1) - This value is read-only and is always returned for module which does not sup… |
| 1.3.6.1.4.1.9.9.289.1.1.16 | TablefcIfToggleCtrlConfigTable | not-accessible | deprecated | This table contains one entry per fibre channel interface. In certain scenarios, when an interface in a system transitions to a down state, it is likely for th… |
| 1.3.6.1.4.1.9.9.289.1.1.16.1 | RowfcIfToggleCtrlConfigEntry | not-accessible | deprecated | An entry in the fcIfToggleCtrlConfigTable. |
| 1.3.6.1.4.1.9.9.289.1.1.16.1.1 | ColumnfcIfToggleCtrlConfigEnable | read-write | deprecated | This object specifies if an interface can be stopped from toggling between up and down states or allowed to toggle continuously. If 'true', the interface will … |
| 1.3.6.1.4.1.9.9.289.1.1.16.1.2 | ColumnfcIfToggleCtrlConfigReason | read-only | deprecated | This object indicates the reason for which a port can be allowed to toggle between up and down states. notApplicable (1) - this reason is displayed when fcIfTo… |
| 1.3.6.1.4.1.9.9.289.1.1.16.1.3 | ColumnfcIfToggleCtrlConfigDuration | read-write | deprecated | This object specifies the time duration in which the port is allowed to toggle as many as the number of times given by fcIfToggleCtrlConfigNumFlaps. When fcIfT… |
| 1.3.6.1.4.1.9.9.289.1.1.16.1.4 | ColumnfcIfToggleCtrlConfigNumFlaps | read-write | deprecated | This object specifies the number of times a port can flap in the duration given by fcIfToggleCtrlConfigDuration. When fcIfToggleCtrlConfigEnable is 'false', th… |
| 1.3.6.1.4.1.9.9.289.1.1.17 | TablefcIfFlapCtrlConfigTable | not-accessible | current | In certain scenarios, when an interface in a system transitions to a down state due to a particular reason, it is likely for the interface to keep flapping bet… |
| 1.3.6.1.4.1.9.9.289.1.1.17.1 | RowfcIfFlapCtrlConfigEntry | not-accessible | current | An entry in the fcIfFlapCtrlConfigTable. |
| 1.3.6.1.4.1.9.9.289.1.1.17.1.1 | ColumnfcIfFlapCtrlConfigReason | not-accessible | current | This object indicates the reason for which a port can be allowed to toggle between up and down states. linkFailure (1) - physical link failure. trustSecViolati… |
| 1.3.6.1.4.1.9.9.289.1.1.17.1.2 | ColumnfcIfFlapCtrlConfigEnable | read-write | current | This object specifies if an interface can be stopped from toggling between up and down states or allowed to toggle continuously. If 'true', the interface will … |
| 1.3.6.1.4.1.9.9.289.1.1.17.1.3 | ColumnfcIfFlapCtrlConfigDuration | read-write | current | This object specifies the time duration in which the port is allowed to toggle as many as the number of times given by fcIfFlapCtrlConfigNumFlaps. When fcIfFla… |
| 1.3.6.1.4.1.9.9.289.1.1.17.1.4 | ColumnfcIfFlapCtrlConfigNumFlaps | read-write | current | This object specifies the number of times a port can flap in the duration given by fcIfFlapCtrlConfigDuration. When fcIfFlapCtrlConfigEnable is 'false', this o… |
| 1.3.6.1.4.1.9.9.289.1.1.18 | ScalarfcIfePortSlowportMonitorTimeout | read-write | current | This object specifies the hardware slowport monitor timeout value in milliseconds for E Ports. |
| 1.3.6.1.4.1.9.9.289.1.1.19 | ScalarfcIffPortSlowportMonitorTimeout | read-write | current | This object specifies the hardware slowport monitor timeout value in milliseconds for F Ports. |
| 1.3.6.1.4.1.9.9.289.1.1.20 | ScalarfcIffPortNoCreditDropTimeout | read-write | current | This object specifies the no-credit drop timeout value in milliseconds for F Ports. |
| 1.3.6.1.4.1.9.9.289.1.1.21 | ScalarfcIfePortCongestionDropTimeout | read-write | current | This object specifies the congestion drop timeout value in milliseconds for E Ports. |
| 1.3.6.1.4.1.9.9.289.1.1.22 | ScalarfcIffPortCongestionDropTimeout | read-write | current | This object specifies the congestion drop timeout value in milliseconds for F Ports. |
| 1.3.6.1.4.1.9.9.289.1.1.23 | ScalarfcIfSysTransceiverPowerControlCapability | read-only | current | The transceiver power control supported on the platform. |
| 1.3.6.1.4.1.9.9.289.1.1.24 | ScalarfcIfSysTransceiverPowerControl | read-write | current | The transceiver power control setting on the platform. notsupported(2): Read-only transceiver power control, indicates that requested transceiver power control… |
| 1.3.6.1.4.1.9.9.289.1.2 | NodecffFcFeStatistics | |||
| 1.3.6.1.4.1.9.9.289.1.2.1 | TablefcIfErrorTable | not-accessible | current | This table contains, one entry for each fabric channel port( including any Port Channel ports ). It contains counters that record the errors detected. This tab… |
| 1.3.6.1.4.1.9.9.289.1.2.1.1 | RowfcIfErrorEntry | not-accessible | current | Each entry contains error counters of a fabric channel port. |
| 1.3.6.1.4.1.9.9.289.1.2.1.1.1 | ColumnfcIfLinkFailures | read-only | current | The number of link failures detected by the FC-Port. |
| 1.3.6.1.4.1.9.9.289.1.2.1.1.2 | ColumnfcIfSyncLosses | read-only | current | The number of loss of synchronization failures detected by the FC-Port. |
| 1.3.6.1.4.1.9.9.289.1.2.1.1.3 | ColumnfcIfSigLosses | read-only | current | The number of signal losses detected by the FC-Port. |
| 1.3.6.1.4.1.9.9.289.1.2.1.1.4 | ColumnfcIfPrimSeqProtoErrors | read-only | current | The number of primitive sequence protocol errors detected by the FC-Port. |
| 1.3.6.1.4.1.9.9.289.1.2.1.1.5 | ColumnfcIfInvalidTxWords | read-only | current | The number of invalid transmission words detected by the FC-Port. |
| 1.3.6.1.4.1.9.9.289.1.2.1.1.6 | ColumnfcIfInvalidCrcs | read-only | current | The number of invalid CRCs detected by the FC-Port. Loop ports should not count CRC errors passing through when monitoring. |
| 1.3.6.1.4.1.9.9.289.1.2.1.1.7 | ColumnfcIfDelimiterErrors | read-only | current | The number of Delimiter Errors detected by the FC-Port. |
| 1.3.6.1.4.1.9.9.289.1.2.1.1.8 | ColumnfcIfAddressIdErrors | read-only | current | The number of address identifier errors detected by the FC-Port. |
| 1.3.6.1.4.1.9.9.289.1.2.1.1.9 | ColumnfcIfLinkResetIns | read-only | current | The number of link reset protocol errors received by the FC-Port from the attached FC-port. |
| 1.3.6.1.4.1.9.9.289.1.2.1.1.10 | ColumnfcIfLinkResetOuts | read-only | current | The number of link reset protocol errors issued by the FC-Port to the attached FC-Port. |
| 1.3.6.1.4.1.9.9.289.1.2.1.1.11 | ColumnfcIfOlsIns | read-only | current | The number of Offline Sequence errors received by the FC-Port. |
| 1.3.6.1.4.1.9.9.289.1.2.1.1.12 | ColumnfcIfOlsOuts | read-only | current | The number of Offline Sequence errors issued by the FC-Port. |
| 1.3.6.1.4.1.9.9.289.1.2.1.1.13 | ColumnfcIfRuntFramesIn | read-only | current | The number of frames received by the FC-port that are shorter than the minimum allowable frame length regardless if the CRC is good or not. |
| 1.3.6.1.4.1.9.9.289.1.2.1.1.14 | ColumnfcIfJabberFramesIn | read-only | current | The number of frames received by the FC-port that are longer than a maximum frame length and also have a CRC error. |
| 1.3.6.1.4.1.9.9.289.1.2.1.1.15 | ColumnfcIfTxWaitCount | read-only | current | The number of times the FC-port waited due to lack of transmit credits. |
| 1.3.6.1.4.1.9.9.289.1.2.1.1.16 | ColumnfcIfFramesTooLong | read-only | current | The number of frames received by the FC-port where the frame length was greater than what was agreed to in FLOGI/PLOGI. This could be caused by losing the end … |
| 1.3.6.1.4.1.9.9.289.1.2.1.1.17 | ColumnfcIfFramesTooShort | read-only | current | The number of frames received by the FC-port where the frame length was less than the minimum indicated by the frame header (normally 24 bytes), but it could b… |
| 1.3.6.1.4.1.9.9.289.1.2.1.1.18 | ColumnfcIfLRRIn | read-only | current | The number of Link reset responses received by the FC-port. |
| 1.3.6.1.4.1.9.9.289.1.2.1.1.19 | ColumnfcIfLRROut | read-only | current | The number of Link reset responses transmitted by the FC-port. |
| 1.3.6.1.4.1.9.9.289.1.2.1.1.20 | ColumnfcIfNOSIn | read-only | current | The number of non-operational sequences received by the FC-port. |
| 1.3.6.1.4.1.9.9.289.1.2.1.1.21 | ColumnfcIfNOSOut | read-only | current | The number of non-operational sequences transmitted by the FC-port. |
| 1.3.6.1.4.1.9.9.289.1.2.1.1.22 | ColumnfcIfFragFrames | read-only | current | The number of fragmented frames received by the FC-port. |
| 1.3.6.1.4.1.9.9.289.1.2.1.1.23 | ColumnfcIfEOFaFrames | read-only | current | The number of frames received by FC-port with EOF aborts. |
| 1.3.6.1.4.1.9.9.289.1.2.1.1.24 | ColumnfcIfUnknownClassFrames | read-only | current | The number of unknown class frames received by FC-port. |
| 1.3.6.1.4.1.9.9.289.1.2.1.1.25 | ColumnfcIf8b10bDisparityErrors | read-only | current | The number of 8b10b disparity errors. |
| 1.3.6.1.4.1.9.9.289.1.2.1.1.26 | ColumnfcIfFramesDiscard | read-only | current | The number of frames discarded by the FC-port. |
| 1.3.6.1.4.1.9.9.289.1.2.1.1.27 | ColumnfcIfELPFailures | read-only | current | The number of Exchange Link Parameters Switch Fabric Internal Link service request failures detected by the FC-Port. This object is applicable to only Intercon… |
| 1.3.6.1.4.1.9.9.289.1.2.1.1.28 | ColumnfcIfBBCreditTransistionFromZero | read-only | current | fcIfBBCreditTransistionFromZero increments if the transmit b2b credit is zero |
| 1.3.6.1.4.1.9.9.289.1.2.1.1.29 | ColumnfcIfEISLFramesDiscard | read-only | current | The number of Enhanced Inter Switch Link (EISL) frames discarded by the FC-port. EISL frames carry an EISL header containing VSAN among other information. |
| 1.3.6.1.4.1.9.9.289.1.2.1.1.30 | ColumnfcIfFramingErrorFrames | read-only | current | The number of framing errors. This denotes that the FC-port detected an inconsistency of frame structure. |
| 1.3.6.1.4.1.9.9.289.1.2.1.1.31 | ColumnfcIfLipF8In | read-only | current | The number of 'F8' (LIP(F8,x)) type of Loop failures - Loop Initialization Primitive Sequence (LIP) errors received by the FC-Port from the attached FC-port. |
| 1.3.6.1.4.1.9.9.289.1.2.1.1.32 | ColumnfcIfLipF8Out | read-only | current | The number of 'F8' (LIP(F8,x)) type of Loop failures - Loop Initialization Primitive Sequence (LIP) errors issued by the FC-Port to the attached FC-Port. |
| 1.3.6.1.4.1.9.9.289.1.2.1.1.33 | ColumnfcIfNonLipF8In | read-only | current | The number of Non 'F8' (LIP(F8,x)) type of Loop failures - Loop Initialization Primitive Sequence (LIP) errors received by the FC-Port from the attached FC-por… |
| 1.3.6.1.4.1.9.9.289.1.2.1.1.34 | ColumnfcIfNonLipF8Out | read-only | current | The number of Non 'F8' (LIP(F8,x)) type of Loop failures - Loop Initialization Primitive Sequence (LIP) errors issued by the FC-Port to the attached FC-Port. |
| 1.3.6.1.4.1.9.9.289.1.2.1.1.35 | ColumnfcIfTimeOutDiscards | read-only | current | The number of packets that are dropped due to time-out at the FC-port or due to the FC-port going offline. |
| 1.3.6.1.4.1.9.9.289.1.2.1.1.36 | ColumnfcIfOutDiscards | read-only | current | The total number of packets that are discarded in the egress side of the FC-port. |
| 1.3.6.1.4.1.9.9.289.1.2.1.1.37 | ColumnfcIfCreditLoss | read-only | current | The number of link reset has occurred due to unavailable credits from the peer side of the link. |
| 1.3.6.1.4.1.9.9.289.1.2.1.1.38 | ColumnfcIfTxWtAvgBBCreditTransitionToZero | read-only | current | fcIfTxWtAvgBBCreditTransitionToZero increments if the credit available is zero for 100 ms. |
| 1.3.6.1.4.1.9.9.289.1.2.1.1.39 | ColumnfcIfBBCreditTransistionToZero | read-only | current | fcIfBBCreditTransistionToZero increments if the receive b2b credit is zero |
| 1.3.6.1.4.1.9.9.289.1.2.1.1.40 | ColumnfcHCIfBBCreditTransistionFromZero | read-only | current | fcHCIfBBCreditTransistionFromZero increments if the transmit b2b credit is zero. |
| 1.3.6.1.4.1.9.9.289.1.2.1.1.41 | ColumnfcHCIfBBCreditTransistionToZero | read-only | current | fcHCIfBBCreditTransistionToZero increments if the receive b2b credit is zero. |
| 1.3.6.1.4.1.9.9.289.1.2.1.1.42 | ColumnfcIfFECCorrectedBlks | read-only | current | The number of blocks corrected by FEC decoder. |
| 1.3.6.1.4.1.9.9.289.1.2.1.1.43 | ColumnfcIfFECUncorrectedBlks | read-only | current | The number of blocks FEC decoder was unable to correct. |
| 1.3.6.1.4.1.9.9.289.1.2.1.1.44 | ColumnfcIfSlowPortCount | read-only | current | This object indicates number of times slowport event(transmit credits not available) condition detected for the timeout value configured in fcIffPortSlowportMo… |
| 1.3.6.1.4.1.9.9.289.1.2.1.1.45 | ColumnfcIfSlowPortOperDelay | read-only | current | This object indicates the maximum operational credit delay experienced by the port at any given time. This object is an absolute value and resets to zero when … |
| 1.3.6.1.4.1.9.9.289.1.2.1.1.46 | ColumnfcIfStateChangeCount | read-only | current | This object indicates the number of times that port had been changed its state from down to up. |
| 1.3.6.1.4.1.9.9.289.1.2.1.1.47 | ColumnfcHCIfTxWaitCount | read-only | current | The number of times the FC-port waited due to lack of transmit credits. This object is a 64-bit version of fcIfTxWaitCount. |
| 1.3.6.1.4.1.9.9.289.1.2.2 | TablefcIfC2AccountingTable | not-accessible | current | This table contains, one entry for each F, FL or TL ports in the fabric element, including Port Channel ports. It contains Class 2 accounting information. |
| 1.3.6.1.4.1.9.9.289.1.2.2.1 | RowfcIfC2AccountingEntry | not-accessible | current | Each entry contains Class 2 accounting information for each F, FL or TL port. |
| 1.3.6.1.4.1.9.9.289.1.2.2.1.1 | ColumnfcIfC2InFrames | read-only | current | The number of Class 2 frames received by this port from its attached Nx_Port. |
| 1.3.6.1.4.1.9.9.289.1.2.2.1.2 | ColumnfcIfC2OutFrames | read-only | current | The number of Class 2 frames delivered through this port to its attached Nx_Port. |
| 1.3.6.1.4.1.9.9.289.1.2.2.1.3 | ColumnfcIfC2InOctets | read-only | current | The number of Class 2 frame octets, including the frame delimiters, received by this port from its attached Nx_Port. |
| 1.3.6.1.4.1.9.9.289.1.2.2.1.4 | ColumnfcIfC2OutOctets | read-only | current | The number of Class 2 frame octets, including the frame delimiters, delivered through this port to its attached Nx_Port. |
| 1.3.6.1.4.1.9.9.289.1.2.2.1.5 | ColumnfcIfC2Discards | read-only | current | The number of Class 2 frames discarded by this port. |
| 1.3.6.1.4.1.9.9.289.1.2.2.1.6 | ColumnfcIfC2FbsyFrames | read-only | current | The number of F_BSY frames generated by this port against Class 2 frames. |
| 1.3.6.1.4.1.9.9.289.1.2.2.1.7 | ColumnfcIfC2FrjtFrames | read-only | current | The number of F_RJT frames generated by this port against Class 2 frames. |
| 1.3.6.1.4.1.9.9.289.1.2.2.1.8 | ColumnfcIfC2PBSYFrames | read-only | current | The number of times that port busy was returned to this port as result of a class 2 frame that could not be delivered to the other end of the link. This occurs… |
| 1.3.6.1.4.1.9.9.289.1.2.2.1.9 | ColumnfcIfC2PRJTFrames | read-only | current | The number of times that port reject was returned to this port as a result of a class 2 frame that was rejected at the destination Nx_Port. |
| 1.3.6.1.4.1.9.9.289.1.2.3 | TablefcIfC3AccountingTable | not-accessible | current | This table contains, one entry for each F, FL or TL ports in the fabric element, including Port Channel ports. It contains Class 3 accounting information. |
| 1.3.6.1.4.1.9.9.289.1.2.3.1 | RowfcIfC3AccountingEntry | not-accessible | current | Each entry contains Class 3 accounting information for each F, FL or TL port. |
| 1.3.6.1.4.1.9.9.289.1.2.3.1.1 | ColumnfcIfC3InFrames | read-only | current | The number of Class 3 frames received by this port from its attached Nx_Port. |
| 1.3.6.1.4.1.9.9.289.1.2.3.1.2 | ColumnfcIfC3OutFrames | read-only | current | The number of Class 3 frames transmitted by this port to its attached Nx_Port. |
| 1.3.6.1.4.1.9.9.289.1.2.3.1.3 | ColumnfcIfC3InOctets | read-only | current | The number of Class 3 frame octets, including the frame delimiters, received by this port from its attached Nx_Port. |
| 1.3.6.1.4.1.9.9.289.1.2.3.1.4 | ColumnfcIfC3OutOctets | read-only | current | The number of Class 3 frame octets, including the frame delimiters, transmitted by this port to its a attached Nx_Port. |
| 1.3.6.1.4.1.9.9.289.1.2.3.1.5 | ColumnfcIfC3Discards | read-only | current | The number of Class 3 frames discarded by this port. |
| 1.3.6.1.4.1.9.9.289.1.2.4 | TablefcIfCfAccountingTable | not-accessible | current | A table that contains, one entry for each Interconnect_Ports (xE_port, B_port) in the fabric element, including Port Channel ports. It contains Class F account… |
| 1.3.6.1.4.1.9.9.289.1.2.4.1 | RowfcIfCfAccountingEntry | not-accessible | current | An entry containing Class F accounting information for each xE_port. |
| 1.3.6.1.4.1.9.9.289.1.2.4.1.1 | ColumnfcIfCfInFrames | read-only | current | The number of Class F frames received by this port. |
| 1.3.6.1.4.1.9.9.289.1.2.4.1.2 | ColumnfcIfCfOutFrames | read-only | current | The number of Class F frames transmitted by this port. |
| 1.3.6.1.4.1.9.9.289.1.2.4.1.3 | ColumnfcIfCfInOctets | read-only | current | The number of Class F frame octets, including the frame delimiters, received by this port from its attached Nx_Port. |
| 1.3.6.1.4.1.9.9.289.1.2.4.1.4 | ColumnfcIfCfOutOctets | read-only | current | The number of Class F frame octets, including the frame delimiters, transmitted by this port to its a attached Nx_Port. |
| 1.3.6.1.4.1.9.9.289.1.2.4.1.5 | ColumnfcIfCfDiscards | read-only | current | The number of Class F frames discarded by this port. |
| 1.3.6.1.4.1.9.9.289.1.2.5 | TablefcIfStatTable | not-accessible | current | A table that contains, one entry for each physical fibre channel port. It contains statistics information. |
| 1.3.6.1.4.1.9.9.289.1.2.5.1 | RowfcIfStatEntry | not-accessible | current | An entry containing statistics information for each fibre channel port. |
| 1.3.6.1.4.1.9.9.289.1.2.5.1.1 | ColumnfcIfCurrRxBbCredit | read-only | current | The current value of receive buffer-to-buffer credits for this port. |
| 1.3.6.1.4.1.9.9.289.1.2.5.1.2 | ColumnfcIfCurrTxBbCredit | read-only | current | The current value of transmit buffer-to-buffer credits for this port. |
| 1.3.6.1.4.1.9.9.289.1.3 | NodecffFcFeNotification | |||
| 1.3.6.1.4.1.9.9.289.1.3.0 | NodecffFcFeNotifications | |||
| 1.3.6.1.4.1.9.9.289.1.3.0.1 | NotificationfcTrunkIfDownNotify | current | This notification is generated by the agent whenever the fcTrunkifOperStatus object for this trunk interface is about to enter the down state from some other s… | |
| 1.3.6.1.4.1.9.9.289.1.3.0.2 | NotificationfcTrunkIfUpNotify | current | This notification is generated by the agent whenever the fcTrunkifOperStatus object for one of its trunk interfaces has left the down state and transitioned in… | |
| 1.3.6.1.4.1.9.9.289.1.3.0.3 | NotificationfcIfElpReject | current | This notification is generated by the agent whenever this interface received a ELP request and rejected it. | |
| 1.3.6.1.4.1.9.9.289.1.3.0.4 | NotificationfcotInserted | current | This notification indicates that a Fibre Channel Optical Transmitter (FCOT) for an interface is inserted. This notification is generated by the agent whenever … | |
| 1.3.6.1.4.1.9.9.289.1.3.0.5 | NotificationfcotRemoved | current | This notification indicates that a Fibre Channel Optical Transmitter (FCOT) for an interface is removed. This notification is generated by the agent whenever t… | |
| 1.3.6.1.4.1.9.9.289.2 | NodecffFcFeMIBConformance | |||
| 1.3.6.1.4.1.9.9.289.2.1 | NodecffFcFeMIBCompliances | |||
| 1.3.6.1.4.1.9.9.289.2.1.1 | CompliancecffFcFeMIBCompliance | read-only | deprecated | The compliance statement for entities which implement the CISCO-FC-FE-MIB. |
| 1.3.6.1.4.1.9.9.289.2.1.2 | CompliancecffFcFeMIBCompliance1 | read-only | deprecated | The compliance statement for entities which implement the CISCO-FC-FE-MIB. |
| 1.3.6.1.4.1.9.9.289.2.1.3 | CompliancecffFcFeMIBCompliance2 | read-only | deprecated | The compliance statement for entities which implement the CISCO-FC-FE-MIB. |
| 1.3.6.1.4.1.9.9.289.2.1.4 | CompliancecffFcFeMIBCompliance3 | read-only | deprecated | The compliance statement for entities which implement the CISCO-FC-FE-MIB. |
| 1.3.6.1.4.1.9.9.289.2.1.5 | CompliancecffFcFeMIBCompliance4 | read-only | deprecated | The compliance statement for entities which implement the CISCO-FC-FE-MIB. |
| 1.3.6.1.4.1.9.9.289.2.1.6 | CompliancecffFcFeMIBCompliance5 | read-only | deprecated | The compliance statement for entities which implement the CISCO-FC-FE-MIB. |
| 1.3.6.1.4.1.9.9.289.2.1.7 | CompliancecffFcFeMIBComplianceRev6 | read-only | deprecated | The compliance statement for entities which implement the CISCO-FC-FE-MIB. |
| 1.3.6.1.4.1.9.9.289.2.1.8 | CompliancecffFcFeMIBComplianceRev7 | read-only | deprecated | The compliance statement for entities which implement the CISCO-FC-FE-MIB. |
| 1.3.6.1.4.1.9.9.289.2.1.9 | CompliancecffFcFeMIBComplianceRev8 | read-only | deprecated | The compliance statement for entities which implement the CISCO-FC-FE-MIB. |
| 1.3.6.1.4.1.9.9.289.2.1.10 | CompliancecffFcFeMIBComplianceRev9 | read-only | deprecated | The compliance statement for entities which implement the CISCO-FC-FE-MIB. |
| 1.3.6.1.4.1.9.9.289.2.1.11 | CompliancecffFcFeMIBComplianceRev10 | read-only | deprecated | The compliance statement for entities which implement the CISCO-FC-FE-MIB. |
| 1.3.6.1.4.1.9.9.289.2.1.12 | CompliancecffFcFeMIBComplianceRev11 | read-only | deprecated | The compliance statement for entities which implement the CISCO-FC-FE-MIB. |
| 1.3.6.1.4.1.9.9.289.2.1.13 | CompliancecffFcFeMIBComplianceRev12 | read-only | deprecated | The compliance statement for entities which implement the CISCO-FC-FE-MIB. |
| 1.3.6.1.4.1.9.9.289.2.1.14 | CompliancecffFcFeMIBComplianceRev13 | read-only | deprecated | The compliance statement for entities which implement the CISCO-FC-FE-MIB. |
| 1.3.6.1.4.1.9.9.289.2.1.15 | CompliancecffFcFeMIBComplianceRev14 | read-only | deprecated | The compliance statement for entities which implement the CISCO-FC-FE-MIB. |
| 1.3.6.1.4.1.9.9.289.2.1.16 | CompliancecffFcFeMIBComplianceRev15 | read-only | deprecated | The compliance statement for entities which implement the CISCO-FC-FE-MIB. |
| 1.3.6.1.4.1.9.9.289.2.1.17 | CompliancecffFcFeMIBComplianceRev16 | read-only | deprecated | The compliance statement for entities which implement the CISCO-FC-FE-MIB. |
| 1.3.6.1.4.1.9.9.289.2.1.18 | CompliancecffFcFeMIBComplianceRev17 | read-only | deprecated | The compliance statement for entities which implement the CISCO-FC-FE-MIB. |
| 1.3.6.1.4.1.9.9.289.2.1.19 | CompliancecffFcFeMIBComplianceRev18 | read-only | current | The compliance statement for entities which implement the CISCO-FC-FE-MIB. |
| 1.3.6.1.4.1.9.9.289.2.2 | NodecffFcFeMIBGroups | |||
| 1.3.6.1.4.1.9.9.289.2.2.1 | GroupfcFeGroup | current | A collection objects giving port information. | |
| 1.3.6.1.4.1.9.9.289.2.2.2 | GroupfcIfGroup | current | A collection objects giving port information. | |
| 1.3.6.1.4.1.9.9.289.2.2.3 | GroupfcTrunkIfGroup | current | A collection objects giving trunk port information. | |
| 1.3.6.1.4.1.9.9.289.2.2.4 | GroupfcIfLoginGroup | current | A collection of objects giving Fabric Login info for Fx_Port. | |
| 1.3.6.1.4.1.9.9.289.2.2.5 | GroupfcIfElpGroup | current | A collection of objects giving Exchange Link Parameters established between the 2 Interconnect_Ports. | |
| 1.3.6.1.4.1.9.9.289.2.2.6 | GroupfcIfCapGroup | deprecated | A collection of objects providing information what the port is capable of supporting. | |
| 1.3.6.1.4.1.9.9.289.2.2.7 | GroupfcIfErrorGroup | current | A collection of objects providing errors of the ports. | |
| 1.3.6.1.4.1.9.9.289.2.2.8 | GroupfcIfC2AccountingGroup | current | A collection of objects providing class 2 accounting information of the ports. | |
| 1.3.6.1.4.1.9.9.289.2.2.9 | GroupfcIfC3AccountingGroup | current | A collection of objects providing class 3 accounting information of the ports. | |
| 1.3.6.1.4.1.9.9.289.2.2.10 | GroupfcIfCfAccountingGroup | current | A collection of objects providing class f accounting information of the ports. | |
| 1.3.6.1.4.1.9.9.289.2.2.11 | GroupfcIfNotificationGroup | current | A collection of notifications for monitoring fibre channel interfaces. | |
| 1.3.6.1.4.1.9.9.289.2.2.12 | GroupfcIfGroupRev1 | current | A collection objects giving port information. | |
| 1.3.6.1.4.1.9.9.289.2.2.13 | GroupfcIfCapGroupRev1 | current | A collection of objects providing information what the port is capable of supporting. | |
| 1.3.6.1.4.1.9.9.289.2.2.14 | GroupfcIfGroupRev2 | current | A collection objects giving port information. | |
| 1.3.6.1.4.1.9.9.289.2.2.15 | GroupfcIfStatGroup | current | A collection objects giving port statistics. | |
| 1.3.6.1.4.1.9.9.289.2.2.16 | GroupfcIfErrorGroupRev1 | current | A collection of objects providing errors of the ports. | |
| 1.3.6.1.4.1.9.9.289.2.2.17 | GroupfcIfGroupRev3 | current | A collection objects giving port information. | |
| 1.3.6.1.4.1.9.9.289.2.2.18 | GroupfcIfRNIDInfoGroup | current | A collection objects giving the peer node identification data. | |
| 1.3.6.1.4.1.9.9.289.2.2.19 | GroupfcIfGigEInfoGroup | current | A collection objects to provide port channel information for gigabit ethernet interfaces. | |
| 1.3.6.1.4.1.9.9.289.2.2.20 | GroupfcotInfoNotificationGroup | current | A collection of notifications for FCOT Inserted/Removed. | |
| 1.3.6.1.4.1.9.9.289.2.2.21 | GroupfcIfInfoGroup | current | A collection of objects providing information what the port is capable of supporting. | |
| 1.3.6.1.4.1.9.9.289.2.2.22 | GroupfcIfGigEinfoExtGroup | current | A collection objects giving providing information about GigE interfaces. | |
| 1.3.6.1.4.1.9.9.289.2.2.23 | GroupfcIfBbScnGroup | current | A collection of objects providing information what the port is capable of supporting. | |
| 1.3.6.1.4.1.9.9.289.2.2.24 | GroupfcIfCapableGroup | current | This is a group of objects that help the user figure out if the system is capable of a change in the given object. | |
| 1.3.6.1.4.1.9.9.289.2.2.25 | GroupfcIfInfoPortGroup | current | A collection objects giving port information. | |
| 1.3.6.1.4.1.9.9.289.2.2.26 | GroupfcIfModuleGroup | deprecated | A collection objects giving module information. | |
| 1.3.6.1.4.1.9.9.289.2.2.27 | GroupfcIfToggleCtrlConfigGroup | deprecated | A collection of objects which provides toggle control information for fibre channel interface. | |
| 1.3.6.1.4.1.9.9.289.2.2.28 | GroupfcIfFlapCtrlConfigGroup | current | A collection of objects which provides toggle control information for fibre channel interface. | |
| 1.3.6.1.4.1.9.9.289.2.2.29 | GroupfcIfModuleGroupRev1 | current | A collection objects giving module information. | |
| 1.3.6.1.4.1.9.9.289.2.2.30 | GroupfcIfGigEinfoExtGroupRev1 | current | A collection objects giving providing information about GigE interfaces. | |
| 1.3.6.1.4.1.9.9.289.2.2.31 | GroupfcIfErrorGroupRev2 | current | A collection of objects providing errors of the ports. | |
| 1.3.6.1.4.1.9.9.289.2.2.32 | GroupfcIfErrorGroupRev3 | current | A collection of objects providing errors of the ports. | |
| 1.3.6.1.4.1.9.9.289.2.2.33 | GroupfcIfGroupRev4 | current | A collection objects giving port information. | |
| 1.3.6.1.4.1.9.9.289.2.2.34 | GroupfcIfErrorGroupRev4 | current | A collection of objects providing errors of the ports. | |
| 1.3.6.1.4.1.9.9.289.2.2.35 | GroupfcFeGroupRev1 | current | A collection of objects providing port information on congestion, credit buffer starvation and slow traffic movement. | |
| 1.3.6.1.4.1.9.9.289.2.2.36 | GroupfcIfErrorGroupRev5 | current | A collection of objects providing slowport statistics. fcIfSlowPortCount represents number of times slowport condition(TX credits zero)is detected for the conf… | |
| 1.3.6.1.4.1.9.9.289.2.2.37 | GroupfcIfGigEinfoExtGroupRev2 | current | Group providing information about GigE interfaces Admin Port Speed. | |
| 1.3.6.1.4.1.9.9.289.2.2.38 | GroupfcIfGigEinfoExtGroupRev3 | current | Group providing information about GigE interface operational status cause. | |
| 1.3.6.1.4.1.9.9.289.2.2.39 | GroupfcIfErrorGroupRev6 | current | Group providing information about port state change count. | |
| 1.3.6.1.4.1.9.9.289.2.2.40 | GroupfcIfGigEinfoExtGroupRev4 | current | Group providing information about service state of GigE interfaces. | |
| 1.3.6.1.4.1.9.9.289.2.2.41 | GroupfcIfErrorGroupRev7 | current | Group providing information about 64-bit Transmit wait count. | |
| 1.3.6.1.4.1.9.9.289.2.2.42 | GroupfcIfGroupRev5 | current | A collection objects giving port information. | |
| 1.3.6.1.4.1.9.9.289.2.2.43 | GroupfcIfGroupRev6 | current | A collection objects giving port transceiver power information. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| FcBbCredit | Integer32 (0..32767) | current | Represents the buffer-to-buffer credit of an NxPort or FC-Port. |
| FcBbCreditModel | INTEGER { regular(1), alternate(2) } | current | Represents the Buffer-to-Buffer Credit model of an FC-Port. regular(1) - Credit model is regular alternate(2) - Credit model is alternate. |
| FcIfOperStatusReason | INTEGER { other(1), none(2), hwFailure(3), loopbackDiagFailure(4), errorDisabled(5), swFailure(6), linkFailure(7), offline(8), nonParticipating(9), initializing(10), vsanInactive(11), adminDown(12), channelAdminDown(13), channelOperSuspended(14), channelConfigurationInProgress(15), rcfInProgress(16), elpFailureIsolation(17), escFailureIsolation(18), domainOverlapIsolation(19), domainAddrAssignFailureIsolation(20), domainOtherSideEportIsolation(21), domainInvalidRCFReceived(22), domainManagerDisabled(23), zoneMergeFailureIsolation(24), vsanMismatchIsolation(25), parentDown(26), srcPortNotBound(27), interfaceRemoved(28), fcotNotPresent(29), fcotVendorNotSupported(30), incompatibleAdminMode(31), incompatibleAdminSpeed(32), suspendedByMode(33), suspendedBySpeed(34), suspendedByWWN(35), domainMaxReTxFailure(36), eppFailure(37), portVsanMismatchIsolation(38), loopbackIsolation(39), upgradeInProgress(40), incompatibleAdminRxBBCredit(41), incompatibleAdminRxBufferSize(42), portChannelMembersDown(43), zoneRemoteNoRespIsolation(44), firstPortUpAsEport(45), firstPortNotUp(46), peerFCIPPortClosedConnection(47), peerFCIPPortResetConnection(48), fcipPortMaxReTx(49), fcipPortKeepAliveTimerExpire(50), fcipPortPersistTimerExpire(51), fcipPortSrcLinkDown(52), fcipPortSrcAdminDown(53), fcipPortAdminCfgChange(54), fcipSrcPortRemoved(55), fcipSrcModuleNotOnline(56), invalidConfig(57), portBindFailure(58), portFabricBindFailure(59), noCommonVsanIsolation(60), ficonVsanDown(61), invalidAttachment(62), portBlocked(63), incomAdminRxBBCreditPerBuf(64), tooManyInvalidFLOGIs(65), deniedDueToPortBinding(66), elpFailureRevMismatch(67), elpFailureClassFParamErr(68), elpFailureClassNParamErr(69), elpFailureUnknownFlowCTLCode(70), elpFailureInvalidFlowCTLParam(71), elpFailureInvalidPortName(72), elpFailureInvalidSwitchName(73), elpFailureRatovEdtovMismatch(74), elpFailureLoopbackDetected(75), elpFailureInvalidTxBBCredit(76), elpFailureInvalidPayloadSize(77), bundleMisCfg(78), bitErrRTThresExceeded(79), linkFailLinkReset(80), linkFailPortInitFail(81), linkFailPortUnusable(82), linkFailLossOfSignal(83), linkFailLossOfSync(84), linkFailNOSRcvd(85), linkFailOLSRcvd(86), linkFailDebounceTimeout(87), linkFailLRRcvdB2B(88), linkFailCreditLoss(89), linkFailRxQOverFlow(90), linkFailTooManyINTR(91), linkFailLIPRcvdB2B(92), linkFailCreditLossB2B(93), linkFailOPNYTMOB2B(94), linkFailOPNYRETB2B(95), linkFailLIPF8Rcvd(96), linkFailLineCardPortShutdown(97), fcspAuthenfailure(98), fcotChksumErr(99), ohmsExtLBTest(100), invalidFabricBindExh(101), tovMismatch(102), ficonNotEnabled(103), ficonNoPortnumber(104), ficonBeingEnabled(105), ePortProhibited(106), portGracefulShutdown(107), trunkNotFullyActive(108), fabricBindingSWWNNotFound(109), fabricBindingDomainInvalid(110), fabricBindingDBMismatch(111), fabricBindingNoRspFromPeer(112), vsanSuspended(113), vsanNotFound(114), trackedPortDown(115), ecSuspendedLoop(116), isolatedBundle(117), peerNotSupportBundle(118), portBringupIsolation(119), domainNotAllowedIsolated(120), virtualIvrDomainOverlapIsolation(121), outOfService(122), portAuthFailed(123), bundleStandby(124), portConnectorTypeErr(125), errorDisabledReInitLimitReached(126), ficonDupPortNum(127), localRcf(128), twoSwitchesWithSameWWN(129), invalidOtherSidePrincEFPReqRecd(130), domainOther(131), elpFailureAllZeroPeerWWNRcvd(132), preferredPathIsolation(133), fcRedirectIsolation(134), portActLicenseNotAvailable(135), sdmIsolation(136), fcidAllocationFailed(137), externallyDisabled(138), unavailableNPVUpstreamPort(139), unavailableNPVPrefUpstreamPort(140), sfpReadError(141), stickyDownOnLinkFailure(142), tooManyLinkFlapsErr(143), unidirectionalUDLD(144), txRxLoopUDLD(145), neighborMismatchUDLD(146), authzPending(147), hotStdbyInBundle(148), incompleteConfig(149), incompleteTunnelCfg(150), hwProgrammingFailed(151), tunnelDstUnreachable(152), suspendByMtu(153), sfpInvalid(154), sfpAbsent(155), portCapabilitiesUnknown(156), channelErrDisabled(157), vrfMismatch(158), vrfForwardReferencing(159), dupTunnelConfigDetected(160), primaryVLANDown(161), vrfUnusable(162), errDisableHandShkFailure(163), errDisabledBPDUGuard(164), dot1xSecViolationErrDisabled(165), emptyEchoUDLD(166), vfTaggingCapErr(167), portDisabled(168), tunnelModeNotConfigured(169), tunnelSrcNotConfigured(170), tunnelDstNotConfigured(171), tunnelUnableToResolveSrcIP(172), tunnelUnableToResolveDstIP(173), tunnelVrfDown(174), sifAdminDown(175), phyIntfDown(176), ifSifLimitExceeded(177), sifHoldDown(178), noFcoe(179), dcxCompatMismatch(180), isolateBundleLimitExceeded(181), sifNotBound(182), errDisabledLacpMiscfg(183), satFabricIfDown(184), invalidSatFabricIf(185), noRemoteChassis(186), vicEnableNotReceived(187), vicDisableReceived(188), vlanVsanMappingNotEnabled(189), stpNotFwdingInFcoeMappedVlan(190), moduleOffline(191), udldAggModeLinkFailure(192), stpInconsVpcPeerDisabled(193), setPortStateFailed(194), suspendedByVpc(195), vpcCfgInProgress(196), vpcPeerLinkDown(197), vpcNoRspFromPeer(198), protoPortSuspend(199), tunnelSrcDown(200), cdpInfoUnavailable(201), fexSfpInvalid(202), errDisabledIpConflict(203), fcotClkRateMismatch(204), portGuardTrustSecViolation(205), sdpTimeout(206), satIncompatTopo(207), waitForFlogi(208), satNotConfigured(209), npivNotEnabledInUpstream(210), vsanMismatchWithUpstreamSwPort(211), portGuardBitErrRate(212), portGuardSigLoss(213), portGuardSyncLoss(214), portGuardLinkReset(215), portGuardCreditLoss(216), ipQosMgrPolicyAppFailure(217), pauseRateLimitErrDisabled(218), lstGrpUplinkDown(219), stickyDnLinkFailure(220), routerMacFailure(221), dcxMultipleMsapIds(222), dcxHundredPdusRcvdNoAck(223), enmSatIncompatibleUplink(224), enmLoopDetected(225), nonStickyExternallyDisabled(226), subGroupIdNotAssigned(227), vemUnlicensed(228), profileNotFound(229), nonExistentVlan(230), vlanInvalidType(231), vlanDown(232), vpcPeerUpgrade(233), ipQosDcbxpCompatFailure(234), nonCiscoHbaVfTag(235), domainIdConfigMismatch(236), sfpSpeedMismatch(237), xcvrInitializing(238), xcvrAbsent(239), xcvrInvalid(240), vfcBindingInvalid(241), vlanNotFcoeEnabled(242), pvlanNativeVlanErr(243), ethL2VlanDown(244), ethIntfInvalidBinding(245), pmonFailure(246), l3NotReady(247), speedMismatch(248), flowControlMismatch(249), vdcMode(250), suspendedDueToMinLinks(251), enmPinFailLinkDown(252), inactiveM1PortFpathActiveVlan(253), parentPortDown(254), moduleRemoved(255), corePortMct(256), nonCorePortMct(257), ficonInorderNotActive(258), invalidEncapsulation(259), modemLineDeasserted(260), ipSecHndshkInProgress(261), sfpEthCompliantErr(262), cellularModemUnattached(263), outOfGlblRxBuffers(264), sfpFcCompliantErr(265), ethIntfNotLicensed(266), domainIdsInvalid(267), fabricNameInvalid(268), ficonNoPortSwapLogicalPort(269), ficonInvalidPortNum(270), remotePortInL2vpnDown(271), suspendedDueToNoLacpPdus(272), fcotValidationFailedAtDriver(273), unsupportedTransceiverMd5DigestNotSame(274), unsupportedTransceiver(275), adminStateConfigChange(276), vlanAllowedList(277), vlanAllowedListOverride(278), vlanAllowedListAdd(279), vlanAllowedRemove(280), vlanCfgStateChange(281), vlanCfgDelete(282), pppPeerNotResponding(283), pppAuthFailed(284), xcvrAuthFailed(285), badFramesRcvdFromLink(286) } | current | The cause of current operational state of the port. GLOSSARY: BB - Buffer-to-Buffer. BB_Credit - Buffer-to-Buffer credit, a link level flow control mechanism. B_Port - A Fibre Channel, Bridging port. BPDU - Bridge Proto… |
| FcPerfBuffer | Integer32 (0..145) | current | Represents the number of performance buffers of a physical FC-port. These buffers in addition to the buffer-to-buffer credits are used to improve the performance of a port, hence called 'Performance buffers'. A value of… |
| FcphVersion | Integer32 (0..255) | current | Represents the version of FC-PH supported by an NxPort or FC-Port. |
| FcRxDataFieldSize | Integer32 (128..2112) | current | Represents the receive data field size of an NxPort or FC-Port. |