CISCO-ICSUDSU-MIB
69 objects
Integrated CSU/DSU MIB module. For T1 and Switched 56 kbps interfaces.
Imported Objects
| CISCO-SMI | ciscoMgmt |
| RFC1213-MIB | ifIndex |
| RFC1406-MIB MISSING | dsx1ConfigEntry |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks |
| SNMPv2-TC | DisplayString TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.44 | IdentityciscoICsuDsuMIB | Integrated CSU/DSU MIB module. For T1 and Switched 56 kbps interfaces. | ||
| 1.3.6.1.4.1.9.9.44.1 | NodeciscoICsuDsuObjects | |||
| 1.3.6.1.4.1.9.9.44.1.1 | NodeciscoICsuDsuGeneral | |||
| 1.3.6.1.4.1.9.9.44.1.1.1 | TableciscoICsuDsuStaticConfigTable | not-accessible | current | The CSU/DSU Static Configuration Table. Contains items that are statically configured and can not be changed by end user without physically changing the CSU/DS… |
| 1.3.6.1.4.1.9.9.44.1.1.1.1 | RowciscoICsuDsuStaticConfigEntry | not-accessible | current | An entry in the static configuration table for each integrated CSU/DSU. |
| 1.3.6.1.4.1.9.9.44.1.1.1.1.1 | ColumnciscoICsuDsuType | read-only | current | Specifies the type of line interface or CSU/DSU. |
| 1.3.6.1.4.1.9.9.44.1.1.1.1.2 | ColumnciscoICsuDsuHwRevision | read-only | current | The CSU/DSU hardware revision. |
| 1.3.6.1.4.1.9.9.44.1.1.1.1.3 | ColumnciscoICsuDsuSwRevision | read-only | current | The CSU/DSU software revision. |
| 1.3.6.1.4.1.9.9.44.1.1.1.1.4 | ColumnciscoICsuDsuProtocolRevision | read-only | current | The Protocol Revision of the CSU/DSU. |
| 1.3.6.1.4.1.9.9.44.1.1.2 | TableciscoICsuDsuTestReportTable | not-accessible | current | The CSU/DSU test report Table. Contains the results of user initiated tests, including selftest, reset, and loopback. |
| 1.3.6.1.4.1.9.9.44.1.1.2.1 | RowciscoICsuDsuTestReportEntry | not-accessible | current | An entry in the test report table for each integrated CSU/DSU. |
| 1.3.6.1.4.1.9.9.44.1.1.2.1.1 | ColumnciscoICsuDsuLastSelfTestResult | read-only | current | The result of the last self test. Represented as a sum of a bit map. The variable bit positions are: 1 - Flash Checksum bad. Catastrophic error. 2 - EPROM Chec… |
| 1.3.6.1.4.1.9.9.44.1.1.2.1.2 | ColumnciscoICsuDsuTimeOfLastSelfTest | read-only | current | SysUpTime of LastSelfTest execution. |
| 1.3.6.1.4.1.9.9.44.1.1.2.1.3 | ColumnciscoICsuDsuNumResets | read-only | current | Number of times CSU/DSU has been reset. |
| 1.3.6.1.4.1.9.9.44.1.1.2.1.4 | ColumnciscoICsuDsuTimeOfLastReset | read-only | current | SysUpTime of last CSU/DSU reset. |
| 1.3.6.1.4.1.9.9.44.1.1.2.1.5 | ColumnciscoICsuDsuLoopbackStatus | read-only | current | Current Status of Loopback. Remaining Loopback results are valid only if status is 'completed' or 'failed' or 'noSyncWithTestPattern'. |
| 1.3.6.1.4.1.9.9.44.1.1.2.1.6 | ColumnciscoICsuDsuLoopbackNumErrors | read-only | current | Number of Bit errors that occurred in last successful loopback test. Valid only if remote loopback with pattern was performed and a sync was achieved on the te… |
| 1.3.6.1.4.1.9.9.44.1.1.2.1.7 | ColumnciscoICsuDsuLoopbackDuration | read-only | current | Duration of last successful loopback test in hundredths of seconds. Note that it is possible for the CSU/DSU to lose framing during the test. If so, the durati… |
| 1.3.6.1.4.1.9.9.44.1.1.2.1.8 | ColumnciscoICsuDsuLoopbackPoint | read-only | current | Point in network where last loopback was performed. Meaning for t1 CSU/DSU: dtePayload - local DSU loopback. The configured 'fractions' of the DS1 signal is lo… |
| 1.3.6.1.4.1.9.9.44.1.1.2.1.9 | ColumnciscoICsuDsuLoopbackPattern | read-only | current | Test pattern used for locally initiated remote loopback. Valid only if a remote loopback was last performed. Following patterns valid for T1 or Switched 56k CS… |
| 1.3.6.1.4.1.9.9.44.1.1.2.1.10 | ColumnciscoICsuDsuUserDefinedPattern | read-only | current | User Defined Loopback Pattern. Valid only if ciscoICsuDsuLoopbackPattern is patternUser. |
| 1.3.6.1.4.1.9.9.44.1.1.2.1.11 | ColumnciscoICsuDsuLoopbackCode | read-only | current | LoopCode used to initiate last remote loopback. Valid only if a only if a remote loopback was last performed. standard - standard loopback code. Usually consis… |
| 1.3.6.1.4.1.9.9.44.1.1.2.1.12 | ColumnciscoICsuDsuEndTimeOfLastLoopback | read-only | current | SysUpTime of completion of last loopback test execution. |
| 1.3.6.1.4.1.9.9.44.1.2 | NodeciscoICsuDsuT1 | |||
| 1.3.6.1.4.1.9.9.44.1.2.1 | TableciscoICsuDsuT1ConfigTable | not-accessible | current | The T1 CSU/DSU Unit Configuration Table. Contains current T1 CSU/DSU configuration parameters not covered by RFC1406. |
| 1.3.6.1.4.1.9.9.44.1.2.1.1 | RowciscoICsuDsuT1ConfigEntry | not-accessible | current | An entry in the configuration table for each integrated T1 CSU/DSU. |
| 1.3.6.1.4.1.9.9.44.1.2.1.1.1 | ColumnciscoICsuDsuT1LineBuildOut | read-only | current | Line build out (LBO) is loss inserted by the CSU in order to meet the 15 to 22.5 dB loss requirement of the premises remote-end section. Selected so that (phon… |
| 1.3.6.1.4.1.9.9.44.1.2.1.1.2 | ColumnciscoICsuDsuT1DteLineCode | read-only | current | Indicates whether the DTE line code is inverted or not. When fractional timeslots are configured for 64kps and AMI linecode, a combination of inverting the DTE… |
| 1.3.6.1.4.1.9.9.44.1.2.1.1.3 | ColumnciscoICsuDsuT1SupportRemoteAlarmIndication | read-only | current | Determines if unit will generate or detect a remote alarm indication (RAI) signal which is also known as a yellow alarm. In D4 framing format, DTE equipment (i… |
| 1.3.6.1.4.1.9.9.44.1.2.1.1.4 | ColumnciscoICsuDsuT1FullBandwidthRemoteLoopcode | read-only | current | LoopCode to be accepted from remote end to place unit in and out of full bandwidth loopback. standard - standard loopback code. Usually consists of the repeate… |
| 1.3.6.1.4.1.9.9.44.1.2.1.1.5 | ColumnciscoICsuDsuT1PayloadRemoteLoopcode | read-only | current | LoopCode to be accepted from remote end to place unit in and out of payload or fractional loopback. standard - standard loopback code. Usually consists of the … |
| 1.3.6.1.4.1.9.9.44.1.2.2 | TableciscoICsuDsuT1StatusTable | not-accessible | current | The T1 CSU/DSU Unit Status Table. Contains information about the status of the CSU/DSU, including externally generated alarm conditions. |
| 1.3.6.1.4.1.9.9.44.1.2.2.1 | RowciscoICsuDsuT1StatusEntry | not-accessible | current | An entry in the status table for each integrated T1 CSU/DSU. |
| 1.3.6.1.4.1.9.9.44.1.2.2.1.1 | ColumnciscoICsuDsuT1LoopStatus | read-only | current | Current Loop status of T1 CSU/DSU. Represented as a sum of a bit map. The variable bit positions are: 1 - lossofSignal (LOS); unable to detect the DS1 signal. … |
| 1.3.6.1.4.1.9.9.44.1.2.2.1.2 | ColumnciscoICsuDsuT1LossOfSignals | read-only | current | Number of times lossofSignal event detected. |
| 1.3.6.1.4.1.9.9.44.1.2.2.1.3 | ColumnciscoICsuDsuT1LossOfFrames | read-only | current | Number of times lossofFrame event detected. |
| 1.3.6.1.4.1.9.9.44.1.2.2.1.4 | ColumnciscoICsuDsuT1RemoteAlarmIndications | read-only | current | Number of times RemoteAlarmIndication signal or yellow alarm received. |
| 1.3.6.1.4.1.9.9.44.1.2.2.1.5 | ColumnciscoICsuDsuT1AlarmIndicationSignals | read-only | current | Number of times Alarm Indication Signal or blue alarm received. |
| 1.3.6.1.4.1.9.9.44.1.3 | NodeciscoICsuDsuSw56k | |||
| 1.3.6.1.4.1.9.9.44.1.3.1 | TableciscoICsuDsuSw56kConfigTable | not-accessible | current | The Switched 56k CSU/DSU Configuration Table. Contains current Sw56k CSU/DSU configuration parameters. |
| 1.3.6.1.4.1.9.9.44.1.3.1.1 | RowciscoICsuDsuSw56kConfigEntry | not-accessible | current | An entry in the sw56k configuration table for each integrated switched 56 kbps CSU/DSU. |
| 1.3.6.1.4.1.9.9.44.1.3.1.1.1 | ColumnciscoICsuDsuSw56kNetworkType | read-only | current | Configures the DSU Module for the specific type of network being used. dds - AT&T's Dataphone Digital Service, generically known as Digital Data System. Requir… |
| 1.3.6.1.4.1.9.9.44.1.3.1.1.2 | ColumnciscoICsuDsuSw56kClockSource | read-only | current | Specifies the timing source for the DSU. 'internal' indicates timing provided by DSU. 'line' indicates timing provided by network receive signal. |
| 1.3.6.1.4.1.9.9.44.1.3.1.1.3 | ColumnciscoICsuDsuSw56kLoopRate | read-only | current | The Loop Rate option selects the network loop operating speed. Only 'ciscoICsuDsuSw56kNetworkType' of 'dds' supports all listed loop rates. 'att' and 'sprint' … |
| 1.3.6.1.4.1.9.9.44.1.3.1.1.4 | ColumnciscoICsuDsuSw56kScramblerEnabled | read-only | current | Indicates if line code scrambling is enabled. Scrambling is used to prevent DTE data sequences that minic network loop maintenance functions from activating lo… |
| 1.3.6.1.4.1.9.9.44.1.3.1.1.5 | ColumnciscoICsuDsuSw56kRemoteLoopbackEnabled | read-only | current | Indicates if a request for Remote Digital Loopback is will be accepted. |
| 1.3.6.1.4.1.9.9.44.1.3.2 | TableciscoICsuDsuSw56kLineStatusTable | not-accessible | current | The Sw56k CSU/DSU Status Table. Contains information about the status of the CSU/DSU, including externally generated alarm conditions. |
| 1.3.6.1.4.1.9.9.44.1.3.2.1 | RowciscoICsuDsuSw56kLineStatusEntry | not-accessible | current | An entry in the sw56k status table for each integrated switched 56 kbps CSU/DSU. |
| 1.3.6.1.4.1.9.9.44.1.3.2.1.1 | ColumnciscoICsuDsuSw56kDialingStatus | read-only | current | This variable indicates the dialing status of units using switched connections. idle - on-hook and no call in progress. dialing - dialing a number. onLine - On… |
| 1.3.6.1.4.1.9.9.44.1.3.2.1.2 | ColumnciscoICsuDsuSw56kLoopStatus | read-only | current | Current loop status or alarm condition. Represented as a sum of a bit map. The variable bit positions are: 1 oosOofFromNetwork - The DSU is receiving Out of Se… |
| 1.3.6.1.4.1.9.9.44.1.3.2.1.3 | ColumnciscoICsuDsuSw56kReceivedOosOofs | read-only | current | Number of times OOS/OOF (Out Of Sync / Out Of Frame) code received. |
| 1.3.6.1.4.1.9.9.44.1.3.2.1.4 | ColumnciscoICsuDsuSw56kLostSealingCurrents | read-only | current | Number of times Lost Sealing Current. |
| 1.3.6.1.4.1.9.9.44.1.3.2.1.5 | ColumnciscoICsuDsuSw56kLostReceiveSignals | read-only | current | Number of times lost receive signal. |
| 1.3.6.1.4.1.9.9.44.1.3.2.1.6 | ColumnciscoICsuDsuSw56kLostFrameSyncs | read-only | current | Number of times lost frame synchronization. |
| 1.3.6.1.4.1.9.9.44.1.3.2.1.7 | ColumnciscoICsuDsuSw56kLoopRateSearches | read-only | current | Number of times attempted Loop Rate Search. |
| 1.3.6.1.4.1.9.9.44.2 | NodeciscoICsuDsuMIBNotificationEnables | |||
| 1.3.6.1.4.1.9.9.44.2.1 | ScalarciscoICsuDsuEnableT1LoopStatusNotification | read-write | current | Indicates whether or not a T1 Alarm Notification will be generated by this system. |
| 1.3.6.1.4.1.9.9.44.2.2 | ScalarciscoICsuDsuEnableSw56kLoopStatusNotification | read-write | current | Indicates whether or not a Sw56k Alarm Notification will be generated by this system. |
| 1.3.6.1.4.1.9.9.44.3 | NodeciscoICsuDsuMIBNotificationPrefix | |||
| 1.3.6.1.4.1.9.9.44.3.0 | NodeciscoICsuDsuMIBNotifications | |||
| 1.3.6.1.4.1.9.9.44.3.0.1 | NotificationciscoICsuDsuT1LoopStatusNotification | current | Indicates a change in T1 Loop Status. | |
| 1.3.6.1.4.1.9.9.44.3.0.2 | NotificationciscoICsuDsuSw56kLoopStatusNotification | current | Indicates a change in Sw56k Loop Status. | |
| 1.3.6.1.4.1.9.9.44.4 | NodeciscoICsuDsuMIBConformance | |||
| 1.3.6.1.4.1.9.9.44.4.1 | NodeciscoICsuDsuMIBCompliances | |||
| 1.3.6.1.4.1.9.9.44.4.1.1 | ComplianceciscoICsuDsuMIBCompliance | current | The compliance statement for entities which implement the Cisco Integrated CSU/DSU MIB | |
| 1.3.6.1.4.1.9.9.44.4.2 | NodeciscoICsuDsuMIBGroups | |||
| 1.3.6.1.4.1.9.9.44.4.2.1 | GroupciscoICsuDsuMIBGroup | current | The collection of objects providing general information about the integrated CSU/DSU. | |
| 1.3.6.1.4.1.9.9.44.4.2.2 | GroupciscoICsuDsuMIBT1Group | current | The collection of objects providing information specific to integrated T1 CSU/DSU. | |
| 1.3.6.1.4.1.9.9.44.4.2.3 | GroupciscoICsuDsuMIBSw56kGroup | current | The collection of objects providing information specific to integrated Switched 56k CSU/DSU. |