CISCO-IETF-MPLS-TE-EXT-STD-03-MIB
42 objects
Copyright (c) 2012 IETF Trust and the persons identified as the document authors. All rights reserved. This MIB module contains generic object definitions for MPLS Traffic Engineering in transport networks.This module is a cisco-ized version of the IETF draft: draft-ietf-mpls-tp-te-mib-03
Imported Objects
| CISCO-MPLS-TC-EXT-STD-MIB | CMplsGlobalId CMplsIccId CMplsLocalId CMplsNodeId |
| CISCO-SMI | ciscoExperiment |
| MPLS-TC-STD-MIB | mplsStdMIB MplsTunnelIndex MplsTunnelInstanceIndex |
| MPLS-TE-STD-MIB | mplsTunnelEgressLSRId mplsTunnelIndex mplsTunnelIngressLSRId mplsTunnelInstance |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 Gauge32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 zeroDotZero |
| SNMPv2-TC | RowPointer RowStatus StorageType TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.10.146 | IdentitycmplsTeExtStdMIB | Copyright (c) 2012 IETF Trust and the persons identified as the document authors. All rights reserved. This MIB module contains generic object definitions for … | ||
| 1.3.6.1.4.1.9.10.146.0 | NodecmplsTeExtNotifications | |||
| 1.3.6.1.4.1.9.10.146.1 | NodecmplsTeExtObjects | |||
| 1.3.6.1.4.1.9.10.146.1.1 | TablecmplsNodeConfigTable | not-accessible | current | This table allows the administrator to map a node or LSR Identifier (IP compatible [Global_Node_ID] or ICC) with a local identifier. This table is created to r… |
| 1.3.6.1.4.1.9.10.146.1.1.1 | RowcmplsNodeConfigEntry | not-accessible | current | An entry in this table represents a mapping identification for the operator or service provider with node or LSR. As per [RFC6370], this mapping is represented… |
| 1.3.6.1.4.1.9.10.146.1.1.1.1 | ColumncmplsNodeConfigLocalId | not-accessible | current | This object allows the administrator to assign a unique local identifier to map Global_Node_ID or ICC. |
| 1.3.6.1.4.1.9.10.146.1.1.1.2 | ColumncmplsNodeConfigGlobalId | read-write | current | This object indicates the Global Operator Identifier. This object value should be zero when mplsNodeConfigIccId is configured with non-null value. |
| 1.3.6.1.4.1.9.10.146.1.1.1.3 | ColumncmplsNodeConfigNodeId | read-write | current | This object indicates the Node_ID within the operator. This object value should be zero when mplsNodeConfigIccId is configured with non-null value. |
| 1.3.6.1.4.1.9.10.146.1.1.1.4 | ColumncmplsNodeConfigIccId | read-write | current | This object allows the operator or service provider to configure a unique MPLS-TP ITU-T Carrier Code (ICC) either for Ingress ID or Egress ID. This object valu… |
| 1.3.6.1.4.1.9.10.146.1.1.1.5 | ColumncmplsNodeConfigRowStatus | read-write | current | This object allows the administrator to create, modify, and/or delete a row in this table. |
| 1.3.6.1.4.1.9.10.146.1.1.1.6 | ColumncmplsNodeConfigStorageType | read-write | current | This variable indicates the storage type for this object. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in t… |
| 1.3.6.1.4.1.9.10.146.1.2 | TablecmplsNodeIpMapTable | not-accessible | current | This read-only table allows the administrator to retrieve the local identifier for a given Global_Node_ID in an IP compatible operator environment. This table … |
| 1.3.6.1.4.1.9.10.146.1.2.1 | RowcmplsNodeIpMapEntry | not-accessible | current | An entry in this table represents a mapping of Global_Node_ID with the local identifier. An entry in this table is created automatically when the Local identif… |
| 1.3.6.1.4.1.9.10.146.1.2.1.1 | ColumncmplsNodeIpMapGlobalId | not-accessible | current | This object indicates the Global_ID. |
| 1.3.6.1.4.1.9.10.146.1.2.1.2 | ColumncmplsNodeIpMapNodeId | not-accessible | current | This object indicates the Node_ID within the operator. |
| 1.3.6.1.4.1.9.10.146.1.2.1.3 | ColumncmplsNodeIpMapLocalId | read-only | current | This object contains an IP compatible local identifier which is defined in mplsNodeConfigTable. |
| 1.3.6.1.4.1.9.10.146.1.3 | TablecmplsNodeIccMapTable | not-accessible | current | This read-only table allows the administrator to retrieve the local identifier for a given ICC operator in an ICC operator environment. This table MAY be used … |
| 1.3.6.1.4.1.9.10.146.1.3.1 | RowcmplsNodeIccMapEntry | not-accessible | current | An entry in this table represents a mapping of ICC with the local identifier. An entry in this table is created automatically when the Local identifier is asso… |
| 1.3.6.1.4.1.9.10.146.1.3.1.1 | ColumncmplsNodeIccMapIccId | not-accessible | current | This object allows the operator or service provider to configure a unique MPLS-TP ITU-T Carrier Code (ICC) either for Ingress or Egress LSR ID. The ICC is a st… |
| 1.3.6.1.4.1.9.10.146.1.3.1.2 | ColumncmplsNodeIccMapLocalId | read-only | current | This object contains an ICC based local identifier which is defined in mplsNodeConfigTable. |
| 1.3.6.1.4.1.9.10.146.1.4 | TablecmplsTunnelExtTable | not-accessible | current | This table represents MPLS-TP specific extensions to mplsTunnelTable. As per MPLS-TP Identifiers [RFC6370], LSP_ID for IP based co-routed bidirectional tunnel,… |
| 1.3.6.1.4.1.9.10.146.1.4.1 | RowcmplsTunnelExtEntry | not-accessible | current | An entry in this table represents MPLS-TP specific additional tunnel configurations. |
| 1.3.6.1.4.1.9.10.146.1.4.1.1 | ColumncmplsTunnelOppositeDirPtr | read-create | current | This object is applicable only for the bidirectional tunnel that has the forward and reverse LSPs in the same tunnel or in the different tunnels. This object h… |
| 1.3.6.1.4.1.9.10.146.1.4.1.2 | ColumncmplsTunnelExtOppositeDirTnlValid | read-create | current | Denotes whether or not this tunnel uses mplsTunnelOppositeDirPtr for identifying the opposite direction tunnel information. Note that if this variable is set t… |
| 1.3.6.1.4.1.9.10.146.1.4.1.3 | ColumncmplsTunnelExtDestTnlIndex | read-create | current | This object is applicable only for the bidirectional tunnel that has the forward and reverse LSPs in the same tunnel or in the different tunnels. This object h… |
| 1.3.6.1.4.1.9.10.146.1.4.1.4 | ColumncmplsTunnelExtDestTnlLspIndex | read-create | current | This object is applicable only for the bidirectional tunnel that has the forward and reverse LSPs in the same tunnel or in the different tunnels. This object s… |
| 1.3.6.1.4.1.9.10.146.1.4.1.5 | ColumncmplsTunnelExtDestTnlValid | read-create | current | Denotes whether or not this tunnel uses mplsTunnelExtDestTnlIndex and mplsTunnelExtDestTnlLspIndex for identifying the opposite direction tunnel information. N… |
| 1.3.6.1.4.1.9.10.146.1.5 | TablecmplsTunnelReversePerfTable | not-accessible | current | This table extends the mplsTunnelTable to provide per-tunnel packet performance information for the reverse direction of a bidirectional tunnel. It can be seen… |
| 1.3.6.1.4.1.9.10.146.1.5.1 | RowcmplsTunnelReversePerfEntry | not-accessible | current | An entry in this table is created by the LSR for every bidirectional MPLS tunnel where packets are visible to the LSR. |
| 1.3.6.1.4.1.9.10.146.1.5.1.1 | ColumncmplsTunnelReversePerfPackets | read-only | current | Number of packets forwarded on the tunnel in the reverse direction if it is bidirectional. This object represents the 32-bit value of the least significant par… |
| 1.3.6.1.4.1.9.10.146.1.5.1.2 | ColumncmplsTunnelReversePerfHCPackets | read-only | current | High-capacity counter for number of packets forwarded on the tunnel in the reverse direction if it is bidirectional. For links that do not transport packets, t… |
| 1.3.6.1.4.1.9.10.146.1.5.1.3 | ColumncmplsTunnelReversePerfErrors | read-only | current | Number of errored packets received on the tunnel in the reverse direction if it is bidirectional. For links that do not transport packets, this packet counter … |
| 1.3.6.1.4.1.9.10.146.1.5.1.4 | ColumncmplsTunnelReversePerfBytes | read-only | current | Number of bytes forwarded on the tunnel in the reverse direction if it is bidirectional. This object represents the 32-bit value of the least significant part … |
| 1.3.6.1.4.1.9.10.146.1.5.1.5 | ColumncmplsTunnelReversePerfHCBytes | read-only | current | High-capacity counter for number of bytes forwarded on the tunnel in the reverse direction if it is bidirectional. For links that do not transport packets, thi… |
| 1.3.6.1.4.1.9.10.146.2 | NodecmplsTeExtConformance | |||
| 1.3.6.1.4.1.9.10.146.2.1 | NodecmplsTeExtGroups | |||
| 1.3.6.1.4.1.9.10.146.2.1.1 | GroupcmplsTunnelExtGroup | current | Necessary, but not sufficient, set of objects to implement tunnels. In addition, depending on the operating environment, the following groups are mandatory. | |
| 1.3.6.1.4.1.9.10.146.2.1.2 | GroupcmplsTunnelExtIpOperatorGroup | current | Object(s) needed to implement IP compatible tunnels. | |
| 1.3.6.1.4.1.9.10.146.2.1.3 | GroupcmplsTunnelExtIccOperatorGroup | current | Object(s) needed to implement ICC based tunnels. | |
| 1.3.6.1.4.1.9.10.146.2.2 | NodecmplsTeExtCompliances | |||
| 1.3.6.1.4.1.9.10.146.2.2.1 | CompliancecmplsTeExtModuleFullCompliance | current | Compliance statement for agents that provide full support the MPLS-TE-EXT-STD-MIB module. | |
| 1.3.6.1.4.1.9.10.146.2.2.2 | CompliancecmplsTeExtModuleReadOnlyCompliance | current | Compliance statement for agents that provide full support the MPLS-TE-EXT-STD-MIB module. |