CISCO-IPSLA-VIDEO-MIB
74 objects
IP SLA is a capability which utilizes active monitoring for network performance. It can be used for network troubleshooting, network assessment and health monitoring. This MIB defines a collection of statistics resulting from the 'video' IP SLA operation. The Video Statistics table names are: cipslaLatestVideoStatsTable cipslaVideoAggStatsTable To create the Video operation, set rttMonEchoAdminProtocol (defined in CISCO-RTTMON-MIB) object to 'videoAppl'. Once the operation has been scheduled, both cipslaLatestVideoStatsTable and cipslaVideoAggStatsTable will be populated. Glossary: IP SLA - Cisco IOS IP Service Level Agreements IP SLA operation - Refers to the 'video' operation supported by IP SLA. RTT - Round Trip Time
Imported Objects
| CISCO-RTTMON-MIB | rttMonCtrlAdminIndex |
| CISCO-RTTMON-TC-MIB | RttResponseSense |
| CISCO-SMI | ciscoMgmt |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Gauge32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | TimeStamp |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.744 | IdentityciscoIpslaVideoMIB | IP SLA is a capability which utilizes active monitoring for network performance. It can be used for network troubleshooting, network assessment and health moni… | ||
| 1.3.6.1.4.1.9.9.744.0 | NodeciscoIpslaVideoMIBNotifs | |||
| 1.3.6.1.4.1.9.9.744.1 | NodeciscoIpslaVideoMIBObjects | |||
| 1.3.6.1.4.1.9.9.744.1.1 | NodecipslaVideoLatestOper | |||
| 1.3.6.1.4.1.9.9.744.1.1.1 | TablecipslaLatestVideoStatsTable | not-accessible | current | The 'video' operation sends out video streams at the frequency specified by rttMonCtrlAdminFrequency. This table contains the statistics calculated for the lat… |
| 1.3.6.1.4.1.9.9.744.1.1.1.1 | RowcipslaLatestVideoStatsEntry | not-accessible | current | A collection of objects that record the latest Video jitter operation. An entry is created only when the following objects are valid. - rttMonCtrlAdminRttType … |
| 1.3.6.1.4.1.9.9.744.1.1.1.1.1 | ColumncipslaLatestVideoMinPosSD | read-only | current | The minimum of all positive jitter values for packets sent from source to destination. |
| 1.3.6.1.4.1.9.9.744.1.1.1.1.2 | ColumncipslaLatestVideoMaxPosSD | read-only | current | The maximum of all positive jitter values for packets sent from source to destination. |
| 1.3.6.1.4.1.9.9.744.1.1.1.1.3 | ColumncipslaLatestVideoNumPosSD | read-only | current | The number of all positive jitter values for packets sent from source to destination. |
| 1.3.6.1.4.1.9.9.744.1.1.1.1.4 | ColumncipslaLatestVideoSumPosSD | read-only | current | The sum of all positive jitter values for packets sent source to destination. The number of such values is stored in cipslaLatestVideoNumPosSD. |
| 1.3.6.1.4.1.9.9.744.1.1.1.1.5 | ColumncipslaLatestVideoSum2PosSD | read-only | current | The sum of square of all positive jitter values for packets sent from source to destination. |
| 1.3.6.1.4.1.9.9.744.1.1.1.1.6 | ColumncipslaLatestVideoMinNegSD | read-only | current | The minimum of absolute values of all negative jitter values for packets sent from source to destination. |
| 1.3.6.1.4.1.9.9.744.1.1.1.1.7 | ColumncipslaLatestVideoMaxNegSD | read-only | current | The maximum of absolute values of all negative jitter values for packets sent from source to destination. |
| 1.3.6.1.4.1.9.9.744.1.1.1.1.8 | ColumncipslaLatestVideoNumNegSD | read-only | current | The number of all negative jitter values for packets sent from source to destination. |
| 1.3.6.1.4.1.9.9.744.1.1.1.1.9 | ColumncipslaLatestVideoSumNegSD | read-only | current | The sum of all negative jitter values for packets sent from source to destination. The number of such values is stored in cipslaLatestVideoNumNegSD. |
| 1.3.6.1.4.1.9.9.744.1.1.1.1.10 | ColumncipslaLatestVideoSum2NegSD | read-only | current | The sum of square of all negative jitter values for packets sent from source to destination. |
| 1.3.6.1.4.1.9.9.744.1.1.1.1.11 | ColumncipslaLatestVideoPktLossSD | read-only | current | The number of packets lost when sent from source to destination. |
| 1.3.6.1.4.1.9.9.744.1.1.1.1.12 | ColumncipslaLatestVideoPktOutSeq | read-only | current | The number of packets arrived out of sequence. |
| 1.3.6.1.4.1.9.9.744.1.1.1.1.13 | ColumncipslaLatestVideoSense | read-only | current | An application specific sense code for the completion status. |
| 1.3.6.1.4.1.9.9.744.1.1.1.1.14 | ColumncipslaLatestVideoOWSumSD | read-only | current | The sum of one way trip time from source to destination. |
| 1.3.6.1.4.1.9.9.744.1.1.1.1.15 | ColumncipslaLatestVideoOWSum2SD | read-only | current | The sum of squares of one way trip time from source to destination. |
| 1.3.6.1.4.1.9.9.744.1.1.1.1.16 | ColumncipslaLatestVideoOWMinSD | read-only | current | The minimum of all one way trip time from source to destination. |
| 1.3.6.1.4.1.9.9.744.1.1.1.1.17 | ColumncipslaLatestVideoOWMaxSD | read-only | current | The maximum of all one way trip time from source to destination. |
| 1.3.6.1.4.1.9.9.744.1.1.1.1.18 | ColumncipslaLatestVideoNumOWSD | read-only | current | The number of successful one way trip time measurements from source to destination. |
| 1.3.6.1.4.1.9.9.744.1.1.1.1.19 | ColumncipslaLatestVideoAvgJitterSD | read-only | current | The average of positive and negative jitter values in Source-to-Destination direction. |
| 1.3.6.1.4.1.9.9.744.1.1.1.1.20 | ColumncipslaLatestVideoIAJOut | read-only | current | Inter-arrival jitter (RFC 1889) at responder. |
| 1.3.6.1.4.1.9.9.744.1.1.1.1.21 | ColumncipslaLatestVideoErrSenseDescr | read-only | current | An sense description for the completion status of the latest video operation. |
| 1.3.6.1.4.1.9.9.744.1.1.1.1.22 | ColumncipslaLatestVideoUnSyncRTs | read-only | current | The number of RTT operations that have completed with sender and responder out of sync with NTP. The NTP sync means the total of NTP offset on sender and respo… |
| 1.3.6.1.4.1.9.9.744.1.1.1.1.23 | ColumncipslaLatestVideoOWSumSDHigh | read-only | current | The sum of one way latency from source to destination (high order 32 bits). The low order 32 bits are stored in cipslaLatestVideoOWSumSD. |
| 1.3.6.1.4.1.9.9.744.1.1.1.1.24 | ColumncipslaLatestVideoOWSum2SDHigh | read-only | current | The sum of squares of one way latency from source to destination (high order 32 bits). The low order 32 bits are stored in cipslaLatestVideoOWSum2SD. |
| 1.3.6.1.4.1.9.9.744.1.1.1.1.25 | ColumncipslaLatestVideoNTPState | read-only | current | A value of sync(1) means sender and responder was in sync with NTP. The NTP sync means the total of NTP offset on sender and responder is within configured tol… |
| 1.3.6.1.4.1.9.9.744.1.1.1.1.26 | ColumncipslaLatestVideoIPDVAvgSDJ | read-only | current | Source to Destination IPDV average jitter according to RFC 5481. |
| 1.3.6.1.4.1.9.9.744.1.1.1.1.27 | ColumncipslaLatestVideoOWAvgSD | read-only | current | The average latency value from source to destination. |
| 1.3.6.1.4.1.9.9.744.1.1.1.1.28 | ColumncipslaLatestVideoPktLateArrival | read-only | current | The number of packets that arrived after the timeout. |
| 1.3.6.1.4.1.9.9.744.1.2 | NodecipslaVideoStats | |||
| 1.3.6.1.4.1.9.9.744.1.2.1 | TablecipslaVideoAggStatsTable | not-accessible | current | The 'video' statistics table contains summarized information of the results for a conceptual control row. A rolling accumulated history of this information is … |
| 1.3.6.1.4.1.9.9.744.1.2.1.1 | RowcipslaVideoAggStatsEntry | not-accessible | current | This entry contains the objects which accumulate the results of a series of 'video' operations over a 60 minute time period or a time period stored in rttMonSc… |
| 1.3.6.1.4.1.9.9.744.1.2.1.1.1 | ColumncipslaVideoAggStartTimeId | not-accessible | current | The value of sysUpTime at the time when this row was created. |
| 1.3.6.1.4.1.9.9.744.1.2.1.1.2 | ColumncipslaVideoAggCompletions | read-only | current | The number of video operations that have completed successfully. |
| 1.3.6.1.4.1.9.9.744.1.2.1.1.3 | ColumncipslaVideoAggOverThresholds | read-only | current | The number of video operations that violate jitterAvg threshold which is defined in RttMonReactVar. |
| 1.3.6.1.4.1.9.9.744.1.2.1.1.4 | ColumncipslaVideoAggMinPosSD | read-only | current | The minimum of absolute values of all positive jitter values for packets sent from source to destination. |
| 1.3.6.1.4.1.9.9.744.1.2.1.1.5 | ColumncipslaVideoAggMaxPosSD | read-only | current | The maximum of absolute values of all positive jitter values for packets sent from source to destination. |
| 1.3.6.1.4.1.9.9.744.1.2.1.1.6 | ColumncipslaVideoAggNumPosSD | read-only | current | The number of all positive jitter values for packets sent from source to destination. |
| 1.3.6.1.4.1.9.9.744.1.2.1.1.7 | ColumncipslaVideoAggSumPosSD | read-only | current | The sum of all positive jitter values for packets sent from source to destination. The number of such values is stored in ipslaVideoAggNumPosSDs. |
| 1.3.6.1.4.1.9.9.744.1.2.1.1.8 | ColumncipslaVideoAggSum2PosSDLow | read-only | current | The sum of square of all positive jitter values for packets sent from source to destination (low order 32 bits). |
| 1.3.6.1.4.1.9.9.744.1.2.1.1.9 | ColumncipslaVideoAggSum2PosSDHigh | read-only | current | The sum of square of all positive jitter values for packets sent from source to destination (high order 32 bits). |
| 1.3.6.1.4.1.9.9.744.1.2.1.1.10 | ColumncipslaVideoAggMinNegSD | read-only | current | The minimum of all negative jitter values for packets sent from source to destination. |
| 1.3.6.1.4.1.9.9.744.1.2.1.1.11 | ColumncipslaVideoAggMaxNegSD | read-only | current | The maximum of all negative jitter values for packets sent from source to destination. |
| 1.3.6.1.4.1.9.9.744.1.2.1.1.12 | ColumncipslaVideoAggNumNegSD | read-only | current | The number of all negative jitter values for packets sent from source to destination. |
| 1.3.6.1.4.1.9.9.744.1.2.1.1.13 | ColumncipslaVideoAggSumNegSD | read-only | current | The sum of all negative jitter values for packets sent from source to destination. The number of such values is stored in ipslaVideoAggNumNegSDs. |
| 1.3.6.1.4.1.9.9.744.1.2.1.1.14 | ColumncipslaVideoAggSum2NegSDLow | read-only | current | The sum of square of all negative jitter values for packets sent from source to destination (low order 32 bits). |
| 1.3.6.1.4.1.9.9.744.1.2.1.1.15 | ColumncipslaVideoAggSum2NegSDHigh | read-only | current | The sum of square of all negative jitter values for packets sent from source to destination (high order 32 bits). |
| 1.3.6.1.4.1.9.9.744.1.2.1.1.16 | ColumncipslaVideoAggPktLossSD | read-only | current | The number of lost packets when sent from source to destination. |
| 1.3.6.1.4.1.9.9.744.1.2.1.1.17 | ColumncipslaVideoAggPktOutSeq | read-only | current | The number of packets arrived out of sequence. |
| 1.3.6.1.4.1.9.9.744.1.2.1.1.18 | ColumncipslaVideoAggPktSkipped | read-only | current | The number of packets that are skipped per operation because the router could not send the packet out. |
| 1.3.6.1.4.1.9.9.744.1.2.1.1.19 | ColumncipslaVideoAggErrors | read-only | current | The number of occasions when a video operation could not be initiated because of an internal error. |
| 1.3.6.1.4.1.9.9.744.1.2.1.1.20 | ColumncipslaVideoAggBusies | read-only | current | The number of occasions when a video operation could not be initiated because a previous video operation has not been completed. |
| 1.3.6.1.4.1.9.9.744.1.2.1.1.21 | ColumncipslaVideoAggOWSumSD | read-only | current | The sum of one way trip time from source to destination. |
| 1.3.6.1.4.1.9.9.744.1.2.1.1.22 | ColumncipslaVideoAggOWSum2SDLow | read-only | current | The sum of squares of one way trip time from source to destination (low order 32 bits). |
| 1.3.6.1.4.1.9.9.744.1.2.1.1.23 | ColumncipslaVideoAggOWSum2SDHigh | read-only | current | The sum of squares of one way trip time from source to destination (high order 32 bits). |
| 1.3.6.1.4.1.9.9.744.1.2.1.1.24 | ColumncipslaVideoAggOWMinSD | read-only | current | The minimum of all one way trip time from source to destination. |
| 1.3.6.1.4.1.9.9.744.1.2.1.1.25 | ColumncipslaVideoAggOWMaxSD | read-only | current | The maximum of all one way trip time from source to destination. |
| 1.3.6.1.4.1.9.9.744.1.2.1.1.26 | ColumncipslaVideoAggNumOWSD | read-only | current | The number of one way trip time that are successfully measured from source to destination. |
| 1.3.6.1.4.1.9.9.744.1.2.1.1.27 | ColumncipslaVideoAggAvgJSD | read-only | current | The average of positive and negative jitter values in source-to-destination direction. |
| 1.3.6.1.4.1.9.9.744.1.2.1.1.28 | ColumncipslaVideoAggIAJOut | read-only | current | Inter-arrival jitter (RFC 1889) at responder |
| 1.3.6.1.4.1.9.9.744.1.2.1.1.29 | ColumncipslaVideoAggIAJIn | read-only | current | Inter-arrival jitter (RFC 1889) at sender |
| 1.3.6.1.4.1.9.9.744.1.2.1.1.30 | ColumncipslaVideoAggPktLateArrival | read-only | current | The number of packets that arrived after the timeout. |
| 1.3.6.1.4.1.9.9.744.1.2.1.1.31 | ColumncipslaVideoAggUnSyncRTs | read-only | current | The number of RTT operations that have completed with sender and responder out of sync with NTP. The NTP sync means the total of NTP offset on sender and respo… |
| 1.3.6.1.4.1.9.9.744.1.2.1.1.32 | ColumncipslaVideoAggOWSumSDHigh | read-only | current | The sum of one way times from source to destination (high order 32 bits). The low order 32 bits are stored in cipslaVideoAggOWSumSD. |
| 1.3.6.1.4.1.9.9.744.2 | NodeciscoIpslaVideoMIBConform | |||
| 1.3.6.1.4.1.9.9.744.2.1 | NodeciscoIpslaVideoMIBCompliances | |||
| 1.3.6.1.4.1.9.9.744.2.1.1 | ComplianceciscoIpslaVideoMIBCompliance | current | This is a default module-compliance containing default object groups. | |
| 1.3.6.1.4.1.9.9.744.2.2 | NodeciscoIpslaVideoMIBGroups | |||
| 1.3.6.1.4.1.9.9.744.2.2.1 | GroupciscoIpslaVideoStatsGroup | current | A collection of statistics objects related to Video Probe. |