CISCO-ITP-ACL-MIB
46 objects
The MIB for managing access lists that control messages transported over Signalling System No. 7 (SS7) Network via Cisco IP Transfer Point. The Cisco IP Transfer Point (ITP) is a hardware and software solution that transports SS7 traffic using IP. Each ITP node provides function similar to SS7 signaling point. The relevant ITU documents describing this technology is the ITU Q series, including ITU Q.700: Introduction to CCITT Signalling System No. 7 and ITU Q.701 Functional description of the message transfer part (MTP) of Signalling System No. 7.
Imported Objects
| CISCO-ITP-TC-MIB | CItpTcAclId CItpTcEncodingSchemeValue CItpTcGlobalTitleSelector CItpTcNAI CItpTcNumberingPlan CItpTcPointCode CItpTcPointCodeMask CItpTcServiceIndicator CItpTcSubSystemNumber CItpTcSubSystemNumberMask CItpTcTranslationType |
| CISCO-SMI | ciscoMgmt |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION TimeStamp |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.227 | IdentityciscoItpAclMIB | The MIB for managing access lists that control messages transported over Signalling System No. 7 (SS7) Network via Cisco IP Transfer Point. The Cisco IP Transf… | ||
| 1.3.6.1.4.1.9.9.227.0 | NodecItpAclMIBNotifs | |||
| 1.3.6.1.4.1.9.9.227.1 | NodecItpAclMIBObjects | |||
| 1.3.6.1.4.1.9.9.227.1.1 | NodecItpAclScalars | |||
| 1.3.6.1.4.1.9.9.227.1.1.1 | ScalarcItpAclConfigLastChanged | read-only | current | The value of sysUpTime at the time of the last creation or deletion of an entry in the cItpAclTable. If the local network management subsystem is re-initializa… |
| 1.3.6.1.4.1.9.9.227.1.2 | NodecItpAclConfig | |||
| 1.3.6.1.4.1.9.9.227.1.2.1 | TablecItpAclTable | not-accessible | current | A table of SP access controls. The access control definition controls which packets are accepted or rejected. The access control may be applied before sending … |
| 1.3.6.1.4.1.9.9.227.1.2.1.1 | RowcItpAclTableEntry | not-accessible | current | A list of Signalling Point access control attributes. |
| 1.3.6.1.4.1.9.9.227.1.2.1.1.1 | ColumncItpAclId | not-accessible | current | The identifier used to select a list of access list entries. The administrator will select an valid identifier within the specified range defined for SS7 acces… |
| 1.3.6.1.4.1.9.9.227.1.2.1.1.2 | ColumncItpAclEntryType | not-accessible | current | The list of possible entry types. 'comments' : A statement used to describe and document access list entries. 'entry' : A access list entry. |
| 1.3.6.1.4.1.9.9.227.1.2.1.1.3 | ColumncItpAclEntryNumber | not-accessible | current | An numeric value assigned to each access list entry. The entries of the same type must be unique. Entries will be tested in ascending order. |
| 1.3.6.1.4.1.9.9.227.1.2.1.1.4 | ColumncItpAclAction | read-create | current | The action to be performed on the packet that matched this access control. |
| 1.3.6.1.4.1.9.9.227.1.2.1.1.5 | ColumncItpAclParameters | read-create | current | The cItpAclType object indicates which types of tests will be processed on the each access list entry. Each may contain one or more filters. The filter will be… |
| 1.3.6.1.4.1.9.9.227.1.2.1.1.6 | ColumncItpAclDpc | read-create | current | The destination point code specified for this ACL. The 'dpc' bit in the cItpAclParameters object is used indicate whether this object has been specified. |
| 1.3.6.1.4.1.9.9.227.1.2.1.1.7 | ColumncItpAclDpcMask | read-create | current | The mask used to define which part of the point code in the packet is significant when comparing the destination point code with cItpAclDpc. The 'dpcMask' bit … |
| 1.3.6.1.4.1.9.9.227.1.2.1.1.8 | ColumncItpAclOpc | read-create | current | The origin point code specified in this ACL. The 'opc' bit in the cItpAclParameters object is used indicate whether this object has been specified. |
| 1.3.6.1.4.1.9.9.227.1.2.1.1.9 | ColumncItpAclOpcMask | read-create | current | The mask used to define which part of the origin point code in the packet is significant when comparing the origin point code with cItpAclDpc. The 'opcMask' bi… |
| 1.3.6.1.4.1.9.9.227.1.2.1.1.10 | ColumncItpAclSi | read-create | current | The Service Indicator Octet. The 'si' bit in the cItpAclParameters object is used indicate whether this object has been specified. |
| 1.3.6.1.4.1.9.9.227.1.2.1.1.11 | ColumncItpAclPattern | read-create | current | The pattern used to match a packet at offset cItpAclOffset. The 'pattern' bit in the cItpAclParameters object is used indicate whether this object has been spe… |
| 1.3.6.1.4.1.9.9.227.1.2.1.1.12 | ColumncItpAclOffset | read-create | current | The offset into the packet were we begin matching the pattern specified by cItpAclPattern is to start. The 'pattern' bit in the cItpAclParameters object is use… |
| 1.3.6.1.4.1.9.9.227.1.2.1.1.13 | ColumncItpAclComment | read-create | current | A brief description used to document access list entries. The 'comment' bit in the cItpAclParameters object is used indicate whether this object has been speci… |
| 1.3.6.1.4.1.9.9.227.1.2.1.1.14 | ColumncItpAclCgpa | read-create | current | The Calling Party Point Code. The 'cgpa' bit in the cItpAclParameters object is used indicate whether this object has been specified. |
| 1.3.6.1.4.1.9.9.227.1.2.1.1.15 | ColumncItpAclCgpaMask | read-create | current | The Calling Party Point Code mask. The 'cgpaMask' bit in the cItpAclParameters object is used indicate whether this object has been specified. |
| 1.3.6.1.4.1.9.9.227.1.2.1.1.16 | ColumncItpAclCgpaSsn | read-create | current | The Calling Party Point Code subsystem number. The 'cgpa' bit in the cItpAclParameters object is used indicate whether this object has been specified. |
| 1.3.6.1.4.1.9.9.227.1.2.1.1.17 | ColumncItpAclCgpaSsnMask | read-create | current | The Calling Party Point Code subsystem number Mask. The 'cgpa' bit in the cItpAclParameters object is used indicate whether this object has been specified. |
| 1.3.6.1.4.1.9.9.227.1.2.1.1.18 | ColumncItpAclCdpa | read-create | current | The Called Party Point Code. The 'cdpa' bit in the cItpAclParameters object is used indicate whether this object has been specified. |
| 1.3.6.1.4.1.9.9.227.1.2.1.1.19 | ColumncItpAclCdpaMask | read-create | current | The Called Party Point Code mask. The 'cdpaMask' bit in the cItpAclParameters object is used indicate whether this object has been specified. |
| 1.3.6.1.4.1.9.9.227.1.2.1.1.20 | ColumncItpAclCdpaSsn | read-create | current | The Called Party Point Code subsystem number. The 'cdpa' bit in the cItpAclParameters object is used indicate whether this object has been specified. |
| 1.3.6.1.4.1.9.9.227.1.2.1.1.21 | ColumncItpAclCdpaSsnMask | read-create | current | The Called Party Point Code subsystem number Mask. The 'cdpa' bit in the cItpAclParameters object is used indicate whether this object has been specified. |
| 1.3.6.1.4.1.9.9.227.1.2.1.1.22 | ColumncItpAclGtiSelector | read-create | current | The Global Title Selector. The 'selector' bit in the cItpAclParameters object is used indicate whether this object has been specified. |
| 1.3.6.1.4.1.9.9.227.1.2.1.1.23 | ColumncItpAclGtiTranslateType | read-create | current | The Global Title Translate Type. The 'selector' bit in the cItpAclParameters object is used indicate whether this object has been specified. |
| 1.3.6.1.4.1.9.9.227.1.2.1.1.24 | ColumncItpAclGtiNumberingPlan | read-create | current | The Global Title Numbering Plan. The 'selector' bit in the cItpAclParameters object is used indicate whether this object has been specified. |
| 1.3.6.1.4.1.9.9.227.1.2.1.1.25 | ColumncItpAclGtiNai | read-create | current | The Global Title nature of address indicator. The 'selector' bit in the cItpAclParameters object is used indicate whether this object has been specified. |
| 1.3.6.1.4.1.9.9.227.1.2.1.1.26 | ColumncItpAclGtiEsv | read-create | current | The Global Title encoding scheme value. The 'selector' bit in the cItpAclParameters object is used indicate whether this object has been specified. |
| 1.3.6.1.4.1.9.9.227.1.2.1.1.27 | ColumncItpAclAft | read-create | current | The Affected Point Code. The 'aft' bit in the cItpAclParameters object is used indicate whether this object has been specified. |
| 1.3.6.1.4.1.9.9.227.1.2.1.1.28 | ColumncItpAclAftMask | read-create | current | The Affected Point Code mask. The 'aftMask' bit in the cItpAclParameters object is used indicate whether this object has been specified. |
| 1.3.6.1.4.1.9.9.227.1.2.1.1.29 | ColumncItpAclAftSsn | read-create | current | The Affected Point Code subsystem number. The 'aft' bit in the cItpAclParameters object is used indicate whether this object has been specified. |
| 1.3.6.1.4.1.9.9.227.1.2.1.1.30 | ColumncItpAclAftSsnMask | read-create | current | The Affected Point Code subsystem number Mask. The 'aft' bit in the cItpAclParameters object is used indicate whether this object has been specified. |
| 1.3.6.1.4.1.9.9.227.1.2.1.1.31 | ColumncItpAclRowStatus | read-create | current | The object is used by a management station to create or delete the row entry in cItpAcl following the RowStatus textual convention. |
| 1.3.6.1.4.1.9.9.227.2 | NodecItpAclMIBConformance | |||
| 1.3.6.1.4.1.9.9.227.2.1 | NodecItpAclMIBCompliances | |||
| 1.3.6.1.4.1.9.9.227.2.1.1 | CompliancecItpAclMIBCompliance | read-only | current | The compliance statement for entities which implement the Cisco SP MIB |
| 1.3.6.1.4.1.9.9.227.2.2 | NodecItpAclMIBGroups | |||
| 1.3.6.1.4.1.9.9.227.2.2.1 | GroupcItpAclScalarGroup | current | SP main objects. | |
| 1.3.6.1.4.1.9.9.227.2.2.2 | GroupcItpAclAccessListGroup | current | Signaling Point access control list objects. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CItpAclAction | INTEGER { accept(1), discard(2) } | current | The list of possible actions to be performed on a packet when information in message matches an access control entry . 'accept' : The matching packet is accepted for further processing. 'discard' : The matching packet i… |