CISCO-LECS-MIB
78 objects
The MIB module for the management of LANE Configuration in Cisco devices.
Imported Objects
| CISCO-SMI | ciscoMgmt |
| IF-MIB | ifIndex |
| LAN-EMULATION-CLIENT-MIB | AtmLaneAddress VciInteger VpiInteger |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString MacAddress RowStatus TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.38 | IdentityciscoLecsMIB | The MIB module for the management of LANE Configuration in Cisco devices. | ||
| 1.3.6.1.4.1.9.9.38.1 | NodeciscoLecsMIBObjects | |||
| 1.3.6.1.4.1.9.9.38.1.1 | Nodelecs | |||
| 1.3.6.1.4.1.9.9.38.1.1.1 | TablelecsTable | not-accessible | current | The (conceptual) table containing the interface specific information of the LECS on a particular device and its associated statistics for that interface. |
| 1.3.6.1.4.1.9.9.38.1.1.1.1 | RowlecsEntry | not-accessible | current | An entry (conceptual row) in the lecsTable, containing information of a LECS for a particular interface. Note that deleting an entry will have the side effect … |
| 1.3.6.1.4.1.9.9.38.1.1.1.1.1 | ColumnlecsConfigTableName | read-create | current | The textual name used to identify a configuration table in use by the designated LECS. Note that this value must be a reference to an entry in the lecsConfigTb… |
| 1.3.6.1.4.1.9.9.38.1.1.1.1.2 | ColumnlecsUpTime | read-only | current | The value of sysUpTime when this entry was created. Note that changing the value of the lecsAdminStatus will not affect the value of this object. This object i… |
| 1.3.6.1.4.1.9.9.38.1.1.1.1.3 | ColumnlecsInConfigReqs | read-only | current | The number of LE_CONFIGURE_REQUESTs that have been received by this LECS on this designated interface. |
| 1.3.6.1.4.1.9.9.38.1.1.1.1.4 | ColumnlecsInConfigErrors | read-only | current | Then number of packets sent to the LECS from the lower layers but which were not correctly formatted configure requests. |
| 1.3.6.1.4.1.9.9.38.1.1.1.1.5 | ColumnlecsOutConfigFails | read-only | current | The number of LE_CONFIGURE_RESPONSEs sent by this particular LECS whose status was other than success. |
| 1.3.6.1.4.1.9.9.38.1.1.1.1.6 | ColumnlecsLastFailCause | read-only | current | The cause for rejection of the last LE_CONFIGURE_REQUEST. This will be the value of the status field that was sent in the rejection LE_CONFIGURE_RESPONSE. If t… |
| 1.3.6.1.4.1.9.9.38.1.1.1.1.7 | ColumnlecsLastFailLec | read-only | current | The ATM address of the LE client whose last configuration request was rejected. This ATM address will be for the LE client who was delivered the last LE_CONFIG… |
| 1.3.6.1.4.1.9.9.38.1.1.1.1.8 | ColumnlecsOperStatus | read-only | current | This object reflects the actual state of the LECS which may differ from that of the lecsAdminStatus object. This can occur when the interface ifOperStatus is '… |
| 1.3.6.1.4.1.9.9.38.1.1.1.1.9 | ColumnlecsAdminStatus | read-create | current | The desired state of the LECS on this interface as prescribed by the operator. The actions of the agent will, if at all possible, eventually result in the desi… |
| 1.3.6.1.4.1.9.9.38.1.1.1.1.10 | ColumnlecsStatus | read-create | current | The status object for the lecsEntry. Note that the lecsConfigTableName must be specified at row creation time. |
| 1.3.6.1.4.1.9.9.38.1.1.1.1.11 | ColumnlecsMasterState | read-only | current | An indication of whether the LECS is acting as the operative master or is a redundant slave. |
| 1.3.6.1.4.1.9.9.38.1.1.2 | TablelecsAtmAddrTable | not-accessible | current | A (conceptual) table of ATM addresses which are listened to by LECSs on this device. |
| 1.3.6.1.4.1.9.9.38.1.1.2.1 | RowlecsAtmAddrEntry | not-accessible | current | An entry (conceptual row) that denotes an ATM address, on a particular interface, that a LECS listens on. Note that an entry in the lecsTable must exist for th… |
| 1.3.6.1.4.1.9.9.38.1.1.2.1.1 | ColumnlecsAtmAddrIndex | not-accessible | current | An arbitrary number that uniquely corresponds to a value of lecsAtmAddrActual for a designated interface. Note that lecsAtmAddrActual could not be used for the… |
| 1.3.6.1.4.1.9.9.38.1.1.2.1.2 | ColumnlecsAtmAddrSpec | read-create | current | An ATM address specified by the network or local management that, with the ATM address mask, determines a portion of the ATM address that the LECS on the desig… |
| 1.3.6.1.4.1.9.9.38.1.1.2.1.3 | ColumnlecsAtmAddrMask | read-create | current | A bit mask signifying what portion of the specified ATM address is relevant. If the ATM address is not specified (i.e. at row creation time), then this object … |
| 1.3.6.1.4.1.9.9.38.1.1.2.1.4 | ColumnlecsAtmAddrActual | read-only | current | The resulting address that the LECS is accepting configuration requests on for the designated interface. This address is the result of the specified ATM addres… |
| 1.3.6.1.4.1.9.9.38.1.1.2.1.5 | ColumnlecsAtmAddrState | read-only | current | Once a (conceptual) row is created, the LECS, if active, goes about interacting through ILMI and registering the address with the switch. The value of this obj… |
| 1.3.6.1.4.1.9.9.38.1.1.2.1.6 | ColumnlecsAtmAddrStatus | read-create | current | The status object for the lecsAtmAddrTable. |
| 1.3.6.1.4.1.9.9.38.1.1.3 | TablelecsConfigDirectConnTable | not-accessible | current | This (conceptual) table allows a manager to view what LE clients have established configure direct connections to the LECS over the designated interface. |
| 1.3.6.1.4.1.9.9.38.1.1.3.1 | RowlecsConfigDirectConnEntry | not-accessible | current | An entry (conceptual row) that denotes a connection to the LECS in the form of a configure direct. It is important to note that the lecsConfigDirectConnSrc and… |
| 1.3.6.1.4.1.9.9.38.1.1.3.1.1 | ColumnlecsConfigDirectConnVpi | not-accessible | current | The virtual path identifier of the designated connection to the LECS. |
| 1.3.6.1.4.1.9.9.38.1.1.3.1.2 | ColumnlecsConfigDirectConnVci | not-accessible | current | The virtual channel identifier of the designated connection to the LECS. |
| 1.3.6.1.4.1.9.9.38.1.1.3.1.3 | ColumnlecsConfigDirectConnVCType | read-only | current | The type of virtual connection that the designated configure direct uses. If this object has the value 'pvc' then the lecsConfigDirectConnSrc and lecsConfigDir… |
| 1.3.6.1.4.1.9.9.38.1.1.3.1.4 | ColumnlecsConfigDirectConnSrc | read-only | current | The calling party ID if the VC is a SVC. If the VC is a PVC then this object shall not be instantiated for the designated VC. |
| 1.3.6.1.4.1.9.9.38.1.1.3.1.5 | ColumnlecsConfigDirectConnDst | read-only | current | The address that was used by the requesting LEC to make the designated connection. The called party ID if the VC is a SVC. If the VC is a PVC then this object … |
| 1.3.6.1.4.1.9.9.38.1.1.3.1.6 | ColumnlecsConfigDirectDstType | read-only | current | The type of entity on the other end of the VC. |
| 1.3.6.1.4.1.9.9.38.1.2 | Nodeconfig | |||
| 1.3.6.1.4.1.9.9.38.1.2.1 | TablelecsConfigTblTable | not-accessible | current | A (conceptual) table of the configuration tables in existence on the device. Note that an entry must exist in this table before it can be used in the lecsTable… |
| 1.3.6.1.4.1.9.9.38.1.2.1.1 | RowlecsConfigTblEntry | not-accessible | current | An entry (conceptual row) that denotes a configuration table, potentially accessible by a LECS. |
| 1.3.6.1.4.1.9.9.38.1.2.1.1.1 | ColumnlecsConfigTblName | not-accessible | current | The textual name used to identify a configuration table. |
| 1.3.6.1.4.1.9.9.38.1.2.1.1.2 | ColumnlecsConfigTblDefaultElanName | read-create | current | The ELAN name assigned to LE clients who do not specify what ELAN they wish to join when issuing a configuration request. It is important to understand when th… |
| 1.3.6.1.4.1.9.9.38.1.2.1.1.3 | ColumnlecsConfigTblStatus | read-create | current | The status object associated with the designated entry. Note that a value for lecsConfigTblDefaultElanName cannot be specified at row creation time (as it poin… |
| 1.3.6.1.4.1.9.9.38.1.2.2 | TablelecsElanConfigTable | not-accessible | current | A (conceptual) configuration table that represents the names of the ELANs known to a LECS and their corresponding LES ATM addresses. |
| 1.3.6.1.4.1.9.9.38.1.2.2.1 | RowlecsElanConfigEntry | not-accessible | current | An entry (conceptual row) in the ELAN configuration table representing a mapping from an ELAN name to a LES ATM address. Note that a value of ELAN name must ex… |
| 1.3.6.1.4.1.9.9.38.1.2.2.1.1 | ColumnlecsElanConfigName | not-accessible | current | The name assigned to an ELAN in this configuration entry. |
| 1.3.6.1.4.1.9.9.38.1.2.2.1.2 | ColumnlecsElanLesAtmAddr | read-create | current | The ATM address of the LES associated with the ELAN of this entry. |
| 1.3.6.1.4.1.9.9.38.1.2.2.1.3 | ColumnlecsElanAccess | read-create | current | The access of the ELAN to configure requests. A 'closed' ELAN (similar to a closed user group) is prevented from being used as the default ELAN and also may no… |
| 1.3.6.1.4.1.9.9.38.1.2.2.1.4 | ColumnlecsElanConfigStatus | read-create | current | This object can only be set to active once a valid value of lecsElanLesAtmAddr is filled in. |
| 1.3.6.1.4.1.9.9.38.1.2.2.1.5 | ColumnlecsElanSegmentId | read-create | current | The Segment Id for Token Ring ELANs associated with this ELAN. A value of zero indicates that a ring number is not applicable to this ELAN. |
| 1.3.6.1.4.1.9.9.38.1.2.3 | TablelecsMacConfigTable | not-accessible | current | A (conceptual) table utilized by a LECS to map a registered MAC address of a LEC to an ELAN name. This table is used be the LECS to assign a LEC to an ELAN. It… |
| 1.3.6.1.4.1.9.9.38.1.2.3.1 | RowlecsMacConfigEntry | not-accessible | current | An entry (conceptual row) of a mapping between a MAC address in primary utilization by a LEC and an ELAN name. |
| 1.3.6.1.4.1.9.9.38.1.2.3.1.1 | ColumnlecsMacConfigAddress | not-accessible | current | The MAC address of a to be associated with an ELAN name. |
| 1.3.6.1.4.1.9.9.38.1.2.3.1.2 | ColumnlecsMacConfigElanName | read-create | current | An ELAN name that will be returned to a LEC that provides the corresponding MAC address in a configuration request. Note that only ELAN names within the lecsEl… |
| 1.3.6.1.4.1.9.9.38.1.2.3.1.3 | ColumnlecsMacConfigLastUsed | read-only | current | The value of sysUpTime when this entry was last used to map a MAC address to an ELAN name. Managers may opt to use this object to garbage collect entries that … |
| 1.3.6.1.4.1.9.9.38.1.2.3.1.4 | ColumnlecsMacConfigStatus | read-create | current | The row cannot be set to 'active' until an appropiate value exists for lecsMacConfigElanName. This may be provided by the agent if there exists a value for the… |
| 1.3.6.1.4.1.9.9.38.1.2.4 | TablelecsAtmAddrConfigTable | not-accessible | current | This (conceptual) table is used by the LECS to map between an ATM address of a LEC and ELAN name. |
| 1.3.6.1.4.1.9.9.38.1.2.4.1 | RowlecsAtmAddrConfigEntry | not-accessible | current | An entry (conceptual row) of the config table that maps between an ATM address of a LEC and ELAN name. |
| 1.3.6.1.4.1.9.9.38.1.2.4.1.1 | ColumnlecsAtmAddrConfigAddress | not-accessible | current | An ATM Address of a LEC that when combined with an address mask is used to determine which ELAN the LE client should belong to. |
| 1.3.6.1.4.1.9.9.38.1.2.4.1.2 | ColumnlecsAtmAddrConfigMask | not-accessible | current | An ATM address mask associated with the LEC ATM address of this entry. Bits in this mask that are set to zero indicate that corresponding bit locations in the … |
| 1.3.6.1.4.1.9.9.38.1.2.4.1.3 | ColumnlecsAtmAddrConfigElanName | read-create | current | The ELAN name to be returned to a configure request that has specified an ATM address that matches the address/mask pair in this entry. Note that only ELAN nam… |
| 1.3.6.1.4.1.9.9.38.1.2.4.1.4 | ColumnlecsAtmAddrLastUsed | read-only | current | The value of sysUpTime corresponding to the time this entry was last used. The manager may opt to use this object to garbage collect entries that have not been… |
| 1.3.6.1.4.1.9.9.38.1.2.4.1.5 | ColumnlecsAtmAddrConfigStatus | read-create | current | The status of this entry (conceptual) row in the lecsAtmAddrConfigTable. The row cannot be set to 'active' until an appropiate value exists for lecsAtmAddrConf… |
| 1.3.6.1.4.1.9.9.38.1.2.5 | TablelecsLesConfigTable | not-accessible | current | A table of LESs servicing an ELAN. |
| 1.3.6.1.4.1.9.9.38.1.2.5.1 | RowlecsLesConfigEntry | not-accessible | current | An entry (conceptual row) in the lecsLesConfigTable. |
| 1.3.6.1.4.1.9.9.38.1.2.5.1.1 | ColumnlecsLesAtmAddr | not-accessible | current | The ATM address of a LES configured to service this ELAN. |
| 1.3.6.1.4.1.9.9.38.1.2.5.1.2 | ColumnlecsLesPriority | read-create | current | The relative priority of the LES. The lower this number the more priority is given the LES for servicing the ELAN. Such that a higher priority LES will superse… |
| 1.3.6.1.4.1.9.9.38.1.2.5.1.3 | ColumnlecsLesConnState | read-only | current | The present state of the given LES. The active(1) LES is servicing the ELAN, inactive(2) LESs are connected but not accepting joins, not-connected(3) LESs are … |
| 1.3.6.1.4.1.9.9.38.1.2.5.1.4 | ColumnlecsLesConfigStatus | read-create | current | The status of the conceptual row. |
| 1.3.6.1.4.1.9.9.38.1.2.6 | TablelecsRDConfigTable | not-accessible | current | A (conceptual) table utilized by a LECS to map a registered Route Descriptor of a LEC to an ELAN name. This table is used by the LECS to assign a LEC to an ELA… |
| 1.3.6.1.4.1.9.9.38.1.2.6.1 | RowlecsRDConfigEntry | not-accessible | current | An entry (conceptual row) of a mapping between a Route Descriptor in primary utilization by a LEC and an ELAN name. |
| 1.3.6.1.4.1.9.9.38.1.2.6.1.1 | ColumnlecsRDConfigSegmentId | not-accessible | current | The Segment ID in a Route Descriptor provided by a LEC during configuration. |
| 1.3.6.1.4.1.9.9.38.1.2.6.1.2 | ColumnlecsRDConfigBridgeNum | not-accessible | current | The Bridge Number in a Route Descriptor provided by a LEC during configuration. |
| 1.3.6.1.4.1.9.9.38.1.2.6.1.3 | ColumnlecsRDConfigElanName | read-create | current | An ELAN name that will be returned to a LEC that provides the corresponding Route Descriptor in a configuration request. Note that only ELAN names within the l… |
| 1.3.6.1.4.1.9.9.38.1.2.6.1.4 | ColumnlecsRDConfigLastUsed | read-only | current | The value of sysUpTime when this entry was last used to map a Route Descriptor to an ELAN name. Managers may opt to use this object to garbage collect entries … |
| 1.3.6.1.4.1.9.9.38.1.2.6.1.5 | ColumnlecsRDConfigStatus | read-create | current | The row cannot be set to 'active' until an appropiate value exists for lecsRDConfigElanName. This may be provided by the agent if there exists a value for the … |
| 1.3.6.1.4.1.9.9.38.2 | NodelecsMIBConformance | |||
| 1.3.6.1.4.1.9.9.38.2.1 | NodelecsMIBCompliances | |||
| 1.3.6.1.4.1.9.9.38.2.1.1 | CompliancelecsMIBCompliance | current | The compliance statement for entities which implement the Cisco LECS MIB. | |
| 1.3.6.1.4.1.9.9.38.2.2 | NodelecsMIBGroups | |||
| 1.3.6.1.4.1.9.9.38.2.2.1 | GrouplecsMIBGroup | current | A collection of objects for the managing of LECS operation. | |
| 1.3.6.1.4.1.9.9.38.2.2.2 | GrouplecsTokenRingMIBGroup | current | A collection of objects for the managing of the LECS emulated token ring operation. | |
| 1.3.6.1.4.1.9.9.38.2.2.3 | GrouplecsRedundancyMIBGroup | current | A collection of objects for the managing of the LECS/LES redundancy operation. |