CISCO-LWAPP-CDP-MIB
49 objects
This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight Access Point Protocol tunnel from Light-weight LWAPP Access Points. This MIB provides configuration and status information about CDP neighbors of LWAPP APs. The MIB provides configuration of CDP feature on the LWAPP Access Points. The MIB can also be used to retrieve the status of the CDP cache information on the various LWAPP access points. The CDP MIB is also supported by controller and provides configuration and status information about CDP neighbors of the controller. The relationship between CC and the LWAPP APs can be depicted as follows: +......+ +......+ +......+ +......+ + + + + + + + + + CC + + CC + + CC + + CC + + + + + + + + + +......+ +......+ +......+ +......+ .. . . . .. . . . . . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ +......+ + + + + + + + + + + + AP + + AP + + AP + + AP + + AP + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ . . . . . . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ +......+ + + + + + + + + + + + MN + + MN + + MN + + MN + + MN + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ The LWAPP tunnel exists between the controller and the APs. The MNs communicate with the APs through the protocol defined by the 802.11 standard. LWAPP APs, upon bootup, discover and join one of the controllers and the controller pushes the configuration, that includes the WLAN parameters, to the LWAPP APs. The APs then encapsulate all the 802.11 frames from wireless clients inside LWAPP frames and forward the LWAPP frames to the controller. GLOSSARY Access Point ( AP ) An entity that contains an 802.11 medium access control ( MAC ) and physical layer ( PHY ) interface and provides access to the distribution services via the wireless medium for associated clients. LWAPP APs encapsulate all the 802.11 frames in LWAPP frames and sends it to the controller to which it is logically connected. Basic Service Set Identifier (BSSID) The identifier for the service set comprising of all the 802.11 stations under the control of one coordinating Access Point. This identifier happens to be the MAC address of the dot11 radio interface of the Access Point. The wireless clients that associate with the Access Point get the wired uplink through this particular dot11 interface. Central Controller ( CC ) The central entity that terminates the LWAPP protocol tunnel from the LWAPP APs. Throughout this MIB, this entity also referred to as 'controller'. Light Weight Access Point Protocol ( LWAPP ) This is a generic protocol that defines the communication between the Access Points and the central controller. Cisco Discovery Protocol ( CDP ) Protocol for discovery of neighboring devices. REFERENCE [1] Part 11 Wireless LAN Medium Access Control ( MAC ) and Physical Layer ( PHY ) Specifications. [2] Draft-obara-capwap-lwapp-00.txt, IETF Light Weight Access Point Protocol.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.623 | IdentityciscoLwappCdpMIB | This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight Access Point Protocol tunnel … | ||
| 1.3.6.1.4.1.9.9.623.0 | NodeciscoLwappCdpMIBNotifs | |||
| 1.3.6.1.4.1.9.9.623.1 | NodeciscoLwappCdpMIBObjects | |||
| 1.3.6.1.4.1.9.9.623.1.1 | NodeclcCdpTraffic | |||
| 1.3.6.1.4.1.9.9.623.1.1.1 | ScalarclcCdpInPackets | read-only | current | This object represents the total number of CDP packets received by the controller. |
| 1.3.6.1.4.1.9.9.623.1.1.2 | ScalarclcCdpOutPackets | read-only | current | This object represents the total number of CDP packets sent by the controller. |
| 1.3.6.1.4.1.9.9.623.1.1.3 | ScalarclcCdpChecksumErrorPackets | read-only | current | This object represents the total number of CDP packets with checksum error. |
| 1.3.6.1.4.1.9.9.623.1.1.4 | ScalarclcCdpNoMemoryPackets | read-only | current | This object represents the total number of CDP packets that were dropped because of no memory availability. |
| 1.3.6.1.4.1.9.9.623.1.1.5 | ScalarclcCdpInvalidPackets | read-only | current | This object represents the total number of CDP packets that were invalid. |
| 1.3.6.1.4.1.9.9.623.1.2 | NodeclcCdpGlobalConfig | |||
| 1.3.6.1.4.1.9.9.623.1.2.1 | ScalarclcCdpAdvtVersion | read-write | current | This object specifies CDP advertisement version. |
| 1.3.6.1.4.1.9.9.623.1.2.2 | ScalarclcCdpMessageInterval | read-write | current | This object specifies the interval (in seconds) at which CDP messages are to be generated. |
| 1.3.6.1.4.1.9.9.623.1.2.3 | ScalarclcCdpGlobalEnable | read-write | current | This object specifies whether CDP has to be enabled or disabled on all APs. When set to 'true', internally CDP is enabled on all APs associated with the contro… |
| 1.3.6.1.4.1.9.9.623.1.3 | NodeclcCdpApCacheStatus | |||
| 1.3.6.1.4.1.9.9.623.1.3.1 | TableclcCdpApCacheTable | not-accessible | current | This table contains the cached neighbor information obtained via receiving CDP messages on APs. Entries are added to this table when a CDP advertisement is rec… |
| 1.3.6.1.4.1.9.9.623.1.3.1.1 | RowclcCdpApCacheEntry | not-accessible | current | |
| 1.3.6.1.4.1.9.9.623.1.3.1.1.1 | ColumnclcCdpApCacheDeviceIndex | not-accessible | current | This object represents a unique value for each device from which CDP messages are being received. |
| 1.3.6.1.4.1.9.9.623.1.3.1.1.2 | ColumnclcCdpApCacheApName | read-only | current | This object represents the name assigned to this AP. If an AP is not configured its factory default name will be ap:<last three byte of MACAddress>. Eg. ap:af:… |
| 1.3.6.1.4.1.9.9.623.1.3.1.1.3 | ColumnclcCdpApCacheApAddressType | read-only | current | This object represents the type of address contained in the corresponding instance of clcCdpApCacheAddress for the AP. |
| 1.3.6.1.4.1.9.9.623.1.3.1.1.4 | ColumnclcCdpApCacheApAddress | read-only | current | This object represents the IP address of the AP. |
| 1.3.6.1.4.1.9.9.623.1.3.1.1.5 | ColumnclcCdpApCacheLocalInterface | read-only | current | This object represents the local port on which LWAPP encapsulated CDP packets were received. |
| 1.3.6.1.4.1.9.9.623.1.3.1.1.6 | ColumnclcCdpApCacheNeighName | read-only | current | This object represents the Device-ID string as reported in the most recent CDP message. The zero-length string indicates no Device-ID field (TLV) was reported … |
| 1.3.6.1.4.1.9.9.623.1.3.1.1.7 | ColumnclcCdpApCacheNeighAddressType | read-only | current | This object represents the type of address contained in the corresponding instance of clcCdpApCacheAddress of neighbor. |
| 1.3.6.1.4.1.9.9.623.1.3.1.1.8 | ColumnclcCdpApCacheNeighAddress | read-only | current | This object represents the (first) network-layer address of the device's SNMP-agent as reported in the most recent CDP message. For example, if the correspondi… |
| 1.3.6.1.4.1.9.9.623.1.3.1.1.9 | ColumnclcCdpApCacheNeighInterface | read-only | current | This object represents the Port-ID string as reported in the most recent CDP message. This will typically be the value of the ifName object (e.g., 'Ethernet0')… |
| 1.3.6.1.4.1.9.9.623.1.3.1.1.10 | ColumnclcCdpApCacheNeighVersion | read-only | current | This object represents the version string which refers to the software running on neighboring device. |
| 1.3.6.1.4.1.9.9.623.1.3.1.1.11 | ColumnclcCdpApCacheAdvtVersion | read-write | current | This object specifies the Cisco Discovery Protocol advertisement version. |
| 1.3.6.1.4.1.9.9.623.1.3.1.1.12 | ColumnclcCdpApCachePlatform | read-only | current | This object represents the device's hardware platform as reported in the most recent CDP message. The zero-length string indicates that no platform field(TLV) … |
| 1.3.6.1.4.1.9.9.623.1.3.1.1.13 | ColumnclcCdpApCacheCapabilities | read-only | current | This object represents the device's functional capabilities as reported in the most recent CDP message. For latest set of specific values, see the latest versi… |
| 1.3.6.1.4.1.9.9.623.1.3.1.1.14 | ColumnclcCdpApCacheHoldtimeLeft | read-only | current | This object represents the time left in seconds before the CDP neighbor entry gets aged-out. |
| 1.3.6.1.4.1.9.9.623.1.3.1.1.15 | ColumnclcCdpApCacheDuplex | read-only | current | This object represents the duplex mode of the ethernet interface between the AP and it's neighboring CDP device, as reported in the most recent CDP message. un… |
| 1.3.6.1.4.1.9.9.623.1.3.1.1.16 | ColumnclcCdpApCacheInterfaceSpeed | read-only | current | This object represents the speed of the ethernet interface between the AP and it's neighboring CDP device. The unit is Mbps. This variable would be populated a… |
| 1.3.6.1.4.1.9.9.623.1.3.2 | TableclcCdpCtAddressTable | not-accessible | current | The (conceptual) table contains the list of network-layer addresses of a neighbor interface, as reported in the Address TLV of the most recently received CDP m… |
| 1.3.6.1.4.1.9.9.623.1.3.2.1 | RowclcCdpCtAddressEntry | not-accessible | current | An entry (conceptual row) in the clcCdpCtAddressTable, containing the information on one address received via CDP on one interface from one device. Entries app… |
| 1.3.6.1.4.1.9.9.623.1.3.2.1.1 | ColumnclcCdpCtAddressIndex | not-accessible | current | This object indicates the index of the address entry for a given cLApSysMacAddress,cdpCacheDeviceIndex pair. It has the value N-1 for the N-th address in the A… |
| 1.3.6.1.4.1.9.9.623.1.3.2.1.2 | ColumnclcCdpCtAddressType | read-only | current | This object represents the type of address contained in the corresponding instance of clcCdpCtAddress. |
| 1.3.6.1.4.1.9.9.623.1.3.2.1.3 | ColumnclcCdpCtAddress | read-only | current | This object represents the N-th network-layer address of the device as reported in the most recent CDP message's address TLV, where N-1 is given by the value o… |
| 1.3.6.1.4.1.9.9.623.1.4 | NodeclcCdpApCacheConfig | |||
| 1.3.6.1.4.1.9.9.623.1.4.1 | TableclcCdpApTable | not-accessible | current | The (conceptual) table contains the status of Cisco Discovery Protocol on LWAPP Access Points. An entry is added to the table when an Aceess Point joins a cont… |
| 1.3.6.1.4.1.9.9.623.1.4.1.1 | RowclcCdpApEntry | not-accessible | current | |
| 1.3.6.1.4.1.9.9.623.1.4.1.1.1 | ColumnclcCdpApCdpEnable | read-write | current | This object specifies whether the Cisco Discovery Protocol is currently running on this AP. When set to 'true', that means CDP is enabled on the AP denoted by … |
| 1.3.6.1.4.1.9.9.623.2 | NodeciscoLwappCdpMIBConform | |||
| 1.3.6.1.4.1.9.9.623.2.1 | NodeciscoLwappCdpMIBCompliances | |||
| 1.3.6.1.4.1.9.9.623.2.1.1 | ComplianceciscoLwappCdpMIBCompliance | deprecated | The compliance statement for the SNMP entities that implement the ciscoLwappCdpMIB module. | |
| 1.3.6.1.4.1.9.9.623.2.1.2 | ComplianceciscoLwappCdpMIBComplianceRev1 | current | The compliance statement for the SNMP entities that implement the ciscoLwappCdpMIB module. | |
| 1.3.6.1.4.1.9.9.623.2.2 | NodeciscoLwappCdpMIBGroups | |||
| 1.3.6.1.4.1.9.9.623.2.2.1 | GroupclcCdpRev01ConfigGroup | current | This is a collection of objects which can configured to control functional parameters of Cisco Discovery Protocol feature in WLAN controllers and LWAPP APs. | |
| 1.3.6.1.4.1.9.9.623.2.2.2 | GroupclcCdpRev01StatusGroup | current | This collection of objects represents the information about the general status attributes of Cisco Discovery Protocol in WLAN controllers and LWAPP APs. | |
| 1.3.6.1.4.1.9.9.623.2.2.3 | GroupclcCdpRev02StatusGroup | current | These are the additional objects which represent the information about the general status attributes of Cisco Discovery Protocol in WLAN controllers and LWAPP … |