CISCO-LWAPP-DOWNLOAD-MIB
48 objects
This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Access Point Protocol tunnel from Cisco Light-weight LWAPP Access Points. The relationship between the controller and the LWAPP APs is depicted as follows: +......+ +......+ +......+ +......+ + + + + + + + + + CC + + CC + + CC + + CC + + + + + + + + + +......+ +......+ +......+ +......+ .. . . . .. . . . . . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ +......+ + + + + + + + + + + + AP + + AP + + AP + + AP + + AP + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ . . . . . . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ +......+ + + + + + + + + + + + MN + + MN + + MN + + MN + + MN + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ GLOSSARY Access Point ( AP ) An entity that contains an 802.11 medium access control ( MAC ) and physical layer ( PHY ) interface and provides access to the distribution services via the wireless medium for associated clients. LWAPP APs encapsulate all the 802.11 frames in LWAPP frames and sends it to the controller to which it is logically connected. Wireless LAN Controller (WLC) Wireless LAN Controller are legacy mobility device which can participate in the new mobility architecture. Central Controller ( CC ) The central entity that terminates the LWAPP protocol tunnel from the LWAPP APs. Throughout this MIB, this entity also referred to as 'controller'. Light Weight Access Point Protocol ( LWAPP ) This is a generic protocol that defines the communication between the Access Points and the controllers. Mobile Node ( MN ) A roaming 802.11 wireless device in a wireless network associated with an access point. REFERENCE [1] Wireless LAN Medium Access Control ( MAC ) and Physical Layer ( PHY ) Specifications. [2] Draft-obara-capwap-lwapp-00.txt, IETF Light Weight Access Point Protocol
Imported Objects
| CISCO-LWAPP-AP-MIB | ciscoLwappApMIB cLApSysMacAddress |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime RowStatus TimeInterval TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.513.4 | IdentityciscoLwappDownloadMIB | This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Access Point Protocol tunnel from… | ||
| 1.3.6.1.4.1.9.9.513.4.0 | NodeciscoLwappDownloadMIBNotifs | |||
| 1.3.6.1.4.1.9.9.513.4.0.1 | NotificationcldlScheduledResetNotif | current | This notification is generated before the Wireless LAN Controller (WLC) reset at time specified by the variable, cldlResetAlertTime. | |
| 1.3.6.1.4.1.9.9.513.4.0.2 | NotificationcldlResetFailedNotif | current | This notification is generated if controller failed to scheduled reset. | |
| 1.3.6.1.4.1.9.9.513.4.0.3 | NotificationcldlClearResetNotif | current | This notification is generated, when the reset entry is deleted from the table cldlReasetTable. | |
| 1.3.6.1.4.1.9.9.513.4.1 | NodeciscoLwappDownloadMIBObjects | |||
| 1.3.6.1.4.1.9.9.513.4.1.1 | NodeciscoLwappDLApBoot | |||
| 1.3.6.1.4.1.9.9.513.4.1.1.1 | TableclDLApBootTable | not-accessible | current | This table represents the primary and backup software image loaded on an AP. An entry in this table gets added when a AP associates to the controller and entry… |
| 1.3.6.1.4.1.9.9.513.4.1.1.1.1 | RowcldlApBootEntry | not-accessible | current | Each (conceptual) entry in this table represents version information for a AP. |
| 1.3.6.1.4.1.9.9.513.4.1.1.1.1.1 | ColumncldlAPName | read-only | current | This object represents the name of the AP. |
| 1.3.6.1.4.1.9.9.513.4.1.1.1.1.2 | ColumncldlAPPrimaryVersion | read-only | current | This object represents the AP primary image version. |
| 1.3.6.1.4.1.9.9.513.4.1.1.1.1.3 | ColumncldlAPBackupVersion | read-only | current | This object represents the AP backup image version. |
| 1.3.6.1.4.1.9.9.513.4.1.1.1.1.4 | ColumncldlAPSwapImage | read-write | current | This object specifies the action to swap the primary and backup images of the Access Point (AP). The value of 'true' indicates that, primary and backup images … |
| 1.3.6.1.4.1.9.9.513.4.1.1.1.1.5 | ColumncldlAPDownloadImage | read-write | current | This object specifies configuration of the image type while downloading from WLC to Access Point(AP). A value of primary indicates that, primary image is downl… |
| 1.3.6.1.4.1.9.9.513.4.1.1.1.1.6 | ColumncldlPreDownloadVersion | read-only | current | This object represents the AP predownloaded version. |
| 1.3.6.1.4.1.9.9.513.4.1.1.1.1.7 | ColumncldlPreDownloadStatus | read-only | current | This object represents the status of the predownloaded image of the AP. A value of none(1) indicates that, nothing is predownloading. A value of intiated(2) in… |
| 1.3.6.1.4.1.9.9.513.4.1.1.1.1.8 | ColumncldlPreDownloadNextRetryTime | read-only | current | This object represents the next retry time for downloading the AP image from the WLC. |
| 1.3.6.1.4.1.9.9.513.4.1.1.1.1.9 | ColumncldlPreDownloadRetryCount | read-only | current | This object represents the number of retry count before the AP image downloaded from the WLC. |
| 1.3.6.1.4.1.9.9.513.4.1.1.1.1.10 | ColumncldlPredownloadImageUpgradeRole | read-only | current | This object represents the efficient AP image upgrade role for the AP.To save time during AP pre-image downloading, one AP of same AP type can be configured as… |
| 1.3.6.1.4.1.9.9.513.4.1.1.1.1.11 | ColumncldlAPSoftwareName | read-only | current | This object represents the software name of the AP. |
| 1.3.6.1.4.1.9.9.513.4.1.2 | NodeciscoLwappDLReset | |||
| 1.3.6.1.4.1.9.9.513.4.1.2.1 | TableclDLResetTable | not-accessible | current | This table represents the resetting schedule of the WLC. User resets WLC by adding a row to this table through explicit management action from the network mana… |
| 1.3.6.1.4.1.9.9.513.4.1.2.1.1 | RowcldlResetEntry | not-accessible | current | Each(conceptual) entry in this table represents the information about WLC reset. |
| 1.3.6.1.4.1.9.9.513.4.1.2.1.1.1 | ColumncldlResetIndex | not-accessible | current | This object represents unique instance of scheduled reset vector of the controller. |
| 1.3.6.1.4.1.9.9.513.4.1.2.1.1.2 | ColumncldlResetDateAndTime | read-create | current | This object specifies to schedule the future reset time of the controller. Format: MM/DD/YY:HH/MM/SS. |
| 1.3.6.1.4.1.9.9.513.4.1.2.1.1.3 | ColumncldlResetSwapImage | read-create | current | This object specifies whether swapping of the primary and backup images needs to be done after the WLC reset. On controller, there are primary and backup image… |
| 1.3.6.1.4.1.9.9.513.4.1.2.1.1.4 | ColumncldlResetAP | read-create | current | This object specifies whether to reset all the APs associated to the controller during scheduled reset of the controller. The value of 'true' indicates that, r… |
| 1.3.6.1.4.1.9.9.513.4.1.2.1.1.5 | ColumncldlResetRowStatus | read-create | current | This is the status column for this row and is used to create and delete specific instances of rows in this table. |
| 1.3.6.1.4.1.9.9.513.4.1.2.1.1.6 | ColumncldlResetSaveConfig | read-create | current | This object specifies whether to save the configuration before rebooting the controller or not. The value of 'true' indicates that, save the configuration and … |
| 1.3.6.1.4.1.9.9.513.4.1.2.1.1.7 | ColumncldlResetAlertTime | read-create | current | This object specifies the number of seconds before the scheduled reset at which the trap message will be generated. if cldlResetDateAndTime is less than cldlRe… |
| 1.3.6.1.4.1.9.9.513.4.1.2.2 | ScalarcldlResetBootImage | read-write | current | This object specifies image to be loaded after reset. A value of primary(1) indicates that, image selected is primary. A value of backup(2) indicates that, ima… |
| 1.3.6.1.4.1.9.9.513.4.1.3 | NodeciscoLwappDLRestart | |||
| 1.3.6.1.4.1.9.9.513.4.1.3.1 | TableclDLRestartTable | not-accessible | current | This table represents the restart schedule of the WLC. Restart is a quick reset method. User restarts WLC by adding a row to this table through explicit manage… |
| 1.3.6.1.4.1.9.9.513.4.1.3.1.1 | RowcldlRestartEntry | not-accessible | current | Each (conceptual) entry in this table represents the information about WLC restart. |
| 1.3.6.1.4.1.9.9.513.4.1.3.1.1.1 | ColumncldlRestartIndex | not-accessible | current | This object represents unique instance of scheduled restart vector of the controller. |
| 1.3.6.1.4.1.9.9.513.4.1.3.1.1.2 | ColumncldlRestartDateAndTime | read-create | current | This object specifies future restart schedule time of the controller. Format: MM/DD/YY:HH/MM/SS. |
| 1.3.6.1.4.1.9.9.513.4.1.3.1.1.3 | ColumncldlRestartAP | read-create | current | This object specifies to reset all the APs associated to the controller.. The value of 'true' indicates that, all APs will be reset. The value of 'false' indic… |
| 1.3.6.1.4.1.9.9.513.4.1.3.1.1.4 | ColumncldlRestartRowStatus | read-create | current | This is the status column for this row and is used to create and delete specific instances of rows in this table. |
| 1.3.6.1.4.1.9.9.513.4.1.3.1.1.5 | ColumncldlRestartSaveConfig | read-create | current | This object specifies whether to save the configuration before rebooting the controller. The value of 'true' indicates that, configuration is saved and control… |
| 1.3.6.1.4.1.9.9.513.4.1.3.1.1.6 | ColumncldlRestartAlertTime | read-create | current | This object specifies the number of seconds before the scheduled restart at which the trap message will be generated. Trap will not be generated if schedule re… |
| 1.3.6.1.4.1.9.9.513.4.2 | NodeciscoLwappDownloadMIBConform | |||
| 1.3.6.1.4.1.9.9.513.4.2.1 | NodecldlMIBCompliances | |||
| 1.3.6.1.4.1.9.9.513.4.2.1.1 | CompliancecldlMIBCompliance | current | The compliance statement for the SNMP entities that implement the ciscoLwappDownloadMIB module. | |
| 1.3.6.1.4.1.9.9.513.4.2.2 | NodecldlMIBGroups | |||
| 1.3.6.1.4.1.9.9.513.4.2.2.1 | GroupcldlApGroup | current | This collection of objects represents the information about the general attributes and functional parameters of those APs that have joined the controller. | |
| 1.3.6.1.4.1.9.9.513.4.2.2.2 | GroupcldlResetGroup | current | This collection of objects represents the information about scheduled reset date and time of the controller. | |
| 1.3.6.1.4.1.9.9.513.4.2.2.3 | GroupcldlRestartGroup | current | This collection of objects represents the information about restart date and time of the controller. | |
| 1.3.6.1.4.1.9.9.513.4.2.2.4 | GroupcldlNotifsGroup | current | This supplemental collection of objects represents the shecduled reset related notifications sent by the agent to a network management station. |