CISCO-POWER-ETHERNET-EXT-MIB
85 objects
A MIB module for extending the POWER-ETHERNET-MIB (RFC3621) to add objects which provide additional management information about Power Sourcing Equipment (PSE) not available in POWER-ETHERNET-MIB. Glossary Power Sourcing Equipment (PSE) These are devices supplying electrical power to other equipment. They are, for example, inline power switches, inline power daughterboards and power patch panels. Powered Device (PD) These are devices receiving their electrical power supply from Power Sourcing Equipment. They are, for example, IP telephones and wireless access points or bridges.
Imported Objects
| CISCO-SMI | ciscoMgmt |
| CISCO-TC | EntPhysicalIndexOrZero |
| POWER-ETHERNET-MIB | pethMainPseGroupIndex pethPsePortEntry pethPsePortGroupIndex pethPsePortIndex |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.402 | IdentityciscoPowerEthernetExtMIB | A MIB module for extending the POWER-ETHERNET-MIB (RFC3621) to add objects which provide additional management information about Power Sourcing Equipment (PSE)… | ||
| 1.3.6.1.4.1.9.9.402.0 | NodecpeExtMIBNotifs | |||
| 1.3.6.1.4.1.9.9.402.0.1 | NotificationcpeExtPolicingNotif | current | This notification is generated when the 'overdraw' or 'overdrawLog' bit in value of cpeExtPsePortAdditionalStatus is set or cleared. | |
| 1.3.6.1.4.1.9.9.402.1 | NodecpeExtMIBObjects | |||
| 1.3.6.1.4.1.9.9.402.1.1 | ScalarcpeExtDefaultAllocation | read-write | current | This object indicates the default inline power allocation per port. This is a global configuration parameter that applies to all inline power capable ports in … |
| 1.3.6.1.4.1.9.9.402.1.2 | TablecpeExtPsePortTable | not-accessible | current | This table extends the POWER-ETHERNET-MIB pethPsePortTable for power Ethernet ports on a Powered Sourcing Equipment (PSE) device. |
| 1.3.6.1.4.1.9.9.402.1.2.1 | RowcpeExtPsePortEntry | not-accessible | current | A cpeExtPsePortEntry extends a corresponding pethPsePortTable entry. This entry displays and controls more characteristics of a power Ethernet port on a PSE de… |
| 1.3.6.1.4.1.9.9.402.1.2.1.1 | ColumncpeExtPsePortEnable | read-write | current | This object is an extension of the pethPsePortAdminEnable object from RFC3621. It allows the user to be more specific when enabling the PSE functions. The stat… |
| 1.3.6.1.4.1.9.9.402.1.2.1.2 | ColumncpeExtPsePortDiscoverMode | read-only | current | This object indicates the discover mode used by the system to discover the PD. A value of 'unknown' indicates that the discover mode on the interface is unknow… |
| 1.3.6.1.4.1.9.9.402.1.2.1.3 | ColumncpeExtPsePortDeviceDetected | read-only | current | This object indicates if a Powered Device (PD) has been detected on the interface. A value of 'true' indicates that a PD has been detected on the interface. A … |
| 1.3.6.1.4.1.9.9.402.1.2.1.4 | ColumncpeExtPsePortIeeePd | read-only | current | This object indicates whether the Powered Device attached to the interface is an IEEE compliant Powered Device or not. A value of 'true' indicates the attached… |
| 1.3.6.1.4.1.9.9.402.1.2.1.5 | ColumncpeExtPsePortAdditionalStatus | read-only | current | This object is an extension of the pethPsePortDetectionStatus object from RFC3621 and provides additional status information. deny: When set, the PD attached t… |
| 1.3.6.1.4.1.9.9.402.1.2.1.6 | ColumncpeExtPsePortPwrMax | read-write | current | This indicates the maximum amount of power that the PSE will make available to the PD connected to this interface. |
| 1.3.6.1.4.1.9.9.402.1.2.1.7 | ColumncpeExtPsePortPwrAllocated | read-only | current | This object indicates the amount of power allocated from the PSE for the PD. |
| 1.3.6.1.4.1.9.9.402.1.2.1.8 | ColumncpeExtPsePortPwrAvailable | read-only | current | This object indicates the amount of power available for the PD to use. This value may differ from the value cpeExtPsePortPwrAllocated due to the efficiency iss… |
| 1.3.6.1.4.1.9.9.402.1.2.1.9 | ColumncpeExtPsePortPwrConsumption | read-only | current | This indicates the actual power consumption of the PD connected to this interface. It may not necessarily be equal to the value of cpeExtPsePortPwrAvailable. |
| 1.3.6.1.4.1.9.9.402.1.2.1.10 | ColumncpeExtPsePortMaxPwrDrawn | read-only | current | This indicates the maximum amount of power drawn by the PD connected to this interface, since it was powered on. |
| 1.3.6.1.4.1.9.9.402.1.2.1.11 | ColumncpeExtPsePortEntPhyIndex | read-only | current | The entPhysicalIndex value that uniquely identifies the PSE port. If the PSE port does not have a corresponding physical entry in entPhysicalTable or if the en… |
| 1.3.6.1.4.1.9.9.402.1.2.1.12 | ColumncpeExtPsePortPolicingCapable | read-only | current | This object indicates whether the PSE port hardware is capable of policing the port for proper power consumption based on the allocated value. |
| 1.3.6.1.4.1.9.9.402.1.2.1.13 | ColumncpeExtPsePortPolicingEnable | read-write | current | This object allows the user to turn on or turn off the power policing of the PSE port. If the instance value of cpeExtPsePortPolicingCapable is 'TRUE', the use… |
| 1.3.6.1.4.1.9.9.402.1.2.1.14 | ColumncpeExtPsePortPolicingAction | read-write | current | This object specifies the power policing action that the device will take on this PSE port when the real-time power consumption exceeds its max power allocatio… |
| 1.3.6.1.4.1.9.9.402.1.2.1.15 | ColumncpeExtPsePortPwrManAlloc | read-write | current | This object specifies the manual power allocation that the PSE will allocate to the PD connected to this interface regardless of the amount requested via CDP o… |
| 1.3.6.1.4.1.9.9.402.1.2.1.16 | ColumncpeExtPsePortCapabilities | read-only | current | This object indicates the PSE functionality that this port supports. If the 'policing' BIT is set, then this PSE port is capable of policing the port for prope… |
| 1.3.6.1.4.1.9.9.402.1.3 | TablecpeExtMainPseTable | not-accessible | current | This table contains the additional information for the main PSE group in pethMainPseTable. |
| 1.3.6.1.4.1.9.9.402.1.3.1 | RowcpeExtMainPseEntry | not-accessible | current | A cpeExtMainPseEntry contains information about a particular pethMainPseGroupIndex. An entry is created by the agent when a main PSE group is added to the peth… |
| 1.3.6.1.4.1.9.9.402.1.3.1.1 | ColumncpeExtMainPseEntPhyIndex | read-only | current | The entPhysicalIndex value that uniquely identifies the main PSE group. If the main PSE group does not have a corresponding physical entry in entPhysicalTable … |
| 1.3.6.1.4.1.9.9.402.1.3.1.2 | ColumncpeExtMainPseDescr | read-only | current | A textual string containing information about the Power Source Equipment (PSE) group. |
| 1.3.6.1.4.1.9.9.402.1.3.1.3 | ColumncpeExtMainPsePwrMonitorCapable | read-only | current | This object indicates if the given group is capable of monitoring the power consumption of the interfaces that belong to the group. The value 'true' means that… |
| 1.3.6.1.4.1.9.9.402.1.3.1.4 | ColumncpeExtMainPseUsedPower | read-only | current | This object indicates used power expressed in miliwatts. |
| 1.3.6.1.4.1.9.9.402.1.3.1.5 | ColumncpeExtMainPseRemainingPower | read-only | current | This object indicates remaining power expressed in miliwatts, this parameter is calculated as pethMainPsePower minus cpeExtMainPseUsedPower. |
| 1.3.6.1.4.1.9.9.402.1.4 | NodecpeExtPdStatistics | |||
| 1.3.6.1.4.1.9.9.402.1.4.1 | ScalarcpeExtPdStatsTotalDevices | read-only | current | This object indicates the total number of the powered devices with any power classifications in the system. Classification is a way to tag different terminals … |
| 1.3.6.1.4.1.9.9.402.1.4.2 | TablecpeExtPdStatsTable | not-accessible | current | This table contains the statistics information of the powered devices fallen into different power classifications in the system. |
| 1.3.6.1.4.1.9.9.402.1.4.2.1 | RowcpeExtPdStatsEntry | not-accessible | current | A cpeExtPdStatsEntry contains the statistics information about a particular power classification defined in cpeExtPdStatsIndex. |
| 1.3.6.1.4.1.9.9.402.1.4.2.1.1 | ColumncpeExtPdStatsClass | not-accessible | current | The power classification as the index for the statistics information for powered devices. A value of 'cisco' indicates that the powered devices are CISCO propr… |
| 1.3.6.1.4.1.9.9.402.1.4.2.1.2 | ColumncpeExtPdStatsDeviceCount | read-only | current | This object indicates the count of the powered devices whose power classification falls into a specific value of cpeExtPdStatsIndex. |
| 1.3.6.1.4.1.9.9.402.1.5 | ScalarcpeExtPolicingNotifEnable | read-write | current | This object is used to enable/disable the the cpeExtPolicingNotif notification. |
| 1.3.6.1.4.1.9.9.402.1.6 | ScalarcpeExtPowerPriorityEnable | read-write | current | This object is the global control of the power priority feature on the device. 'true' indicates that the power priority feature is globally enabled. 'false' in… |
| 1.3.6.1.4.1.9.9.402.1.7 | TablecpeExtPsePortLldpTable | not-accessible | current | A table provides the Link Layer Discovery Protocol (LLDP) based Data Link Layer (DLL) power classification characteristics of PSE ports and PDs attached to the… |
| 1.3.6.1.4.1.9.9.402.1.7.1 | RowcpeExtPsePortLldpEntry | not-accessible | current | A cpeExtPsePortLldpEntry entry contains the LLDP based 802.3at DLL power classification characteristics for a particular PSE and the PD attached to it. A PSE h… |
| 1.3.6.1.4.1.9.9.402.1.7.1.1 | ColumncpeExtPsePortLldpPwrType | read-only | current | The DTE Power via MDI type of the local system (PSE). |
| 1.3.6.1.4.1.9.9.402.1.7.1.2 | ColumncpeExtPsePortLldpPdPwrType | read-only | current | The DTE Power via MDI type of the remote system (PD). |
| 1.3.6.1.4.1.9.9.402.1.7.1.3 | ColumncpeExtPsePortLldpPwrSrc | read-only | current | The power source of the local system (PSE). |
| 1.3.6.1.4.1.9.9.402.1.7.1.4 | ColumncpeExtPsePortLldpPdPwrSrc | read-only | current | The power source of the remote system (PD). |
| 1.3.6.1.4.1.9.9.402.1.7.1.5 | ColumncpeExtPsePortLldpPwrPriority | read-only | current | The power priority of the local system (PSE). |
| 1.3.6.1.4.1.9.9.402.1.7.1.6 | ColumncpeExtPsePortLldpPdPwrPriority | read-only | current | The power priority of the remote system (PD). |
| 1.3.6.1.4.1.9.9.402.1.7.1.7 | ColumncpeExtPsePortLldpPwrReq | read-only | current | The requested PD power value that the local system (PSE) mirrors back to the remote system (PD). |
| 1.3.6.1.4.1.9.9.402.1.7.1.8 | ColumncpeExtPsePortLldpPdPwrReq | read-only | current | The PD requested power value received from the remote system (PD). |
| 1.3.6.1.4.1.9.9.402.1.7.1.9 | ColumncpeExtPsePortLldpPwrAlloc | read-only | current | The PSE allocated power value for the remote system (PD). |
| 1.3.6.1.4.1.9.9.402.1.7.1.10 | ColumncpeExtPsePortLldpPdPwrAlloc | read-only | current | The PSE allocated power value received from the remote system (PD). |
| 1.3.6.1.4.1.9.9.402.1.7.1.11 | ColumncpeExtPsePortLldpPwrClass | read-only | current | The PSE power classification sent to the remote PD via MDI TLV in LLDP Protocol. |
| 1.3.6.1.4.1.9.9.402.1.7.1.12 | ColumncpeExtPsePortLldpPdPwrClass | read-only | current | This power classification received from the remote system (PD). |
| 1.3.6.1.4.1.9.9.402.1.7.1.13 | ColumncpeExtPsePortLldpPdPwrSupport | read-only | current | This object indicates the power support mode received from the remote PD via MDI TLV in LLDP protocol. 'portClass' - This bit is set if the port is operating a… |
| 1.3.6.1.4.1.9.9.402.1.7.1.14 | ColumncpeExtPsePortLldpPdPwrPairsOrZero | read-only | current | This object indicates the pinout pairs in use received from the remote PD via MDI TLV in LLDP Protocol. 'unknown' - information is not available 'signal' - the… |
| 1.3.6.1.4.1.9.9.402.2 | NodecpeExtMIBConformance | |||
| 1.3.6.1.4.1.9.9.402.2.1 | NodecpeExtMIBCompliances | |||
| 1.3.6.1.4.1.9.9.402.2.1.1 | CompliancecpeExtMIBCompliance | deprecated | The compliance statement for the CISCO-POWER-ETHERNET-EXT-MIB. | |
| 1.3.6.1.4.1.9.9.402.2.1.2 | CompliancecpeExtMIBCompliance2 | deprecated | The compliance statement for the CISCO-POWER-ETHERNET-EXT-MIB. | |
| 1.3.6.1.4.1.9.9.402.2.1.3 | CompliancecpeExtMIBCompliance3 | deprecated | The compliance statement for the CISCO-POWER-ETHERNET-EXT-MIB. | |
| 1.3.6.1.4.1.9.9.402.2.1.4 | CompliancecpeExtMIBCompliance4 | read-only | deprecated | The compliance statement for the CISCO-POWER-ETHERNET-EXT-MIB. |
| 1.3.6.1.4.1.9.9.402.2.1.5 | CompliancecpeExtMIBCompliance5 | read-only | deprecated | The compliance statement for the CISCO-POWER-ETHERNET-EXT-MIB. |
| 1.3.6.1.4.1.9.9.402.2.1.6 | CompliancecpeExtMIBCompliance6 | read-only | current | The compliance statement for the CISCO-POWER-ETHERNET-EXT-MIB. |
| 1.3.6.1.4.1.9.9.402.2.2 | NodecpeExtMIBGroups | |||
| 1.3.6.1.4.1.9.9.402.2.2.1 | GroupcpeExtPsePortGroup | current | This group provides information and configuration objects in addition to those provided in the POWER-ETHERNET-MIB (RFC3621). | |
| 1.3.6.1.4.1.9.9.402.2.2.2 | GroupcpeExtPsePortGlobalConfigGroup | current | This is a collection of objects which provide global configuration of the PSE interfaces. | |
| 1.3.6.1.4.1.9.9.402.2.2.3 | GroupcpeExtPsePortPwrMonitorGroup | current | This is a collection of objects which provide power monitoring on PD's connected to the PSE interfaces. | |
| 1.3.6.1.4.1.9.9.402.2.2.4 | GroupcpeExtMainPseGroup | deprecated | This is a collection of objects which provide additional information for the PSE group. cpeExtMainPseGroup object is superseded by cpeExtMainPseGroup2, and cpe… | |
| 1.3.6.1.4.1.9.9.402.2.2.5 | GroupcpeExtPortEntityIndexGroup | current | This is a collection of objects which provide entity physical index information for PSE port. | |
| 1.3.6.1.4.1.9.9.402.2.2.6 | GroupcpeExtPortPolicingGroup | current | This is a collection of objects which provide the hardware power consumption policing information for PSE port. | |
| 1.3.6.1.4.1.9.9.402.2.2.7 | GroupcpeExtPdStatsGroup | current | This is a collection of objects which provide the statistics information for powered devices. | |
| 1.3.6.1.4.1.9.9.402.2.2.8 | GroupcpeExtMainPseGroup2 | current | This is a collection of objects which provide additional information to identify the PSE group. | |
| 1.3.6.1.4.1.9.9.402.2.2.9 | GroupcpeExtPseGrpPwrGroup | current | This is a collection of objects which provide power monitoring information for the PSE group. | |
| 1.3.6.1.4.1.9.9.402.2.2.10 | GroupcpeExtPortPolicingActionGroup | current | This is a collection of objects which provide control of the power policing action of the PSE port. | |
| 1.3.6.1.4.1.9.9.402.2.2.11 | GroupcpeExtPortPwrManAllocGroup | current | This is a collection of objects which provide manual power allocation for the PSE port. | |
| 1.3.6.1.4.1.9.9.402.2.2.12 | GroupcpeExtPolicingNotifEnableGroup | current | A collection of object that provides control over power consumption policing status notification. | |
| 1.3.6.1.4.1.9.9.402.2.2.13 | GroupcpeExtPolicingNotifGroup | current | This is a collection of notifications related to power consumption policing information for PSE ports. | |
| 1.3.6.1.4.1.9.9.402.2.2.14 | GroupcpeExtPowerPriorityGroup | current | A collection of objects which provides global control of power priority feature. | |
| 1.3.6.1.4.1.9.9.402.2.2.15 | GroupcpeExtPsePortLldpGroup | current | A collection of objects which provides the information about the LLDP based Data Link Layer power classification characteristics of power Ethernet PSE ports. | |
| 1.3.6.1.4.1.9.9.402.2.2.16 | GroupcpeExtPsePortCapabilitiesGroup | current | A collection of objects which provides PSE port capabilities. | |
| 1.3.6.1.4.1.9.9.402.2.2.17 | GroupcpeExtPsePortLldpPowerGroup | current | A collection of objects which provide Power information via MDI TLV in LLDP Protocol. | |
| 1.3.6.1.4.1.9.9.402.2.2.18 | GroupcpeExtPseInfoPwrGroup | current | This is a collection of objects which provide used and remaining power information for the PSE group. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CpeExtLldpPwrClassOrZero | INTEGER { unknown(0), class0(1), class1(2), class2(3), class3(4), class4(5) } | current | The power class of the PD or PSE port that implements the LLDP based Data Link Layer power classification 'unknown' - power classification of the powered devices is unknown. 'class0' - power classification of the powere… |
| CpeExtLldpPwrSrc | INTEGER { pseAndLocal(1), local(2), pse(3), backupSrc(4), primarySrc(5), unknown(6) } | current | The power source of the PD or PSE port which implements the LLDP based Data Link Layer power classification. 'pseAndLocal' - A PD powered both locally and by a PSE. 'local' - A PD powered locally only. 'pse' - A PD powe… |
| CpeExtLldpPwrType | INTEGER { type1Pd(1), type1Pse(2), type2Pd(3), type2Pse(4) } | current | The requested Data Terminal Equipment (DTE) Power via Media Dependent Interface (MDI) type based on Data Link Layer (DLL) power classification. In Data Link Layer power classification, the PSE and PD perform power negot… |
| CpeExtPwrPriority | INTEGER { critical(1), high(2), low(3), unknown(4) } | current | The power priority for the PD on the PSE port which implements the LLDP based Data Link Layer power classification. 'critical' - power priority is at critical level. 'high' - power priority is at high level. 'low' - pow… |