CISCO-QLLC01-MIB
52 objects
This is the MIB module for objects used to manage the QLLC protocol.
Imported Objects
| CISCO-SMI | ciscoExperiment |
| RFC1382-MIB | -- X121Address -- |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.10.6 | Identitysnaqllc01 | This is the MIB module for objects used to manage the QLLC protocol. | ||
| 1.3.6.1.4.1.9.10.6.1 | Nodeqllc | |||
| 1.3.6.1.4.1.9.10.6.1.1 | TableqllcLSAdminTable | not-accessible | current | This table contains objects that can be changed for each qllc entry. Changing one of these parameters will take effect in the operating LS immediately. Each ql… |
| 1.3.6.1.4.1.9.10.6.1.1.1 | RowqllcLSAdminEntry | not-accessible | current | Configured parameter values for a specific qllc. |
| 1.3.6.1.4.1.9.10.6.1.1.1.1 | ColumnqllcLSAdminIfIndex | read-write | current | Interface Index value for the qllc connection. |
| 1.3.6.1.4.1.9.10.6.1.1.1.2 | ColumnqllcLSAdminLciVcIndex | read-write | current | The virtual circuit number for the logical channel identifier or PVC number depending on the type of circuit on this interface. |
| 1.3.6.1.4.1.9.10.6.1.1.1.3 | ColumnqllcLSAdminCircuitType | read-write | current | The circuit type on this interface. |
| 1.3.6.1.4.1.9.10.6.1.1.1.4 | ColumnqllcLSAdminRole | read-write | current | The role that the QLLC link station shall assume. |
| 1.3.6.1.4.1.9.10.6.1.1.1.5 | ColumnqllcLSAdminX25Add | read-write | current | The X.25 address associated with the qllc connection. |
| 1.3.6.1.4.1.9.10.6.1.1.1.6 | ColumnqllcLSAdminModulo | read-write | current | The modulus for QLLC link station. It determines the size of the rotating ACK window and can take values of 8 and 128. |
| 1.3.6.1.4.1.9.10.6.1.1.1.7 | ColumnqllcLSAdminLgX25 | read-write | current | The largest QLLC packet allowed to go out on the QLLC/X.25 side. |
| 1.3.6.1.4.1.9.10.6.1.2 | TableqllcLSOperTable | not-accessible | current | This table contains an entry for each qllc connection. |
| 1.3.6.1.4.1.9.10.6.1.2.1 | RowqllcLSOperEntry | not-accessible | current | Parameter values for a specific qllc connection. |
| 1.3.6.1.4.1.9.10.6.1.2.1.1 | ColumnqllcLSOperIfIndex | read-only | current | Interface Index value for the qllc connection. |
| 1.3.6.1.4.1.9.10.6.1.2.1.2 | ColumnqllcLSOperLciVcIndex | read-only | current | The virtual circuit number for the logical channel identifier on this interface. |
| 1.3.6.1.4.1.9.10.6.1.2.1.3 | ColumnqllcLSOperCircuitType | read-only | current | The circuit type on this interface. |
| 1.3.6.1.4.1.9.10.6.1.2.1.4 | ColumnqllcLSOperRole | read-only | current | The role the QLLC link station. |
| 1.3.6.1.4.1.9.10.6.1.2.1.5 | ColumnqllcLSOperX25Add | read-only | current | The remote X.25 address associated with the qllc connection. |
| 1.3.6.1.4.1.9.10.6.1.2.1.6 | ColumnqllcLSOperModulo | read-only | current | The modulus for QLLC link station. It determines the size of the rotating ACK window and can take values of 8 and 128. |
| 1.3.6.1.4.1.9.10.6.1.2.1.7 | ColumnqllcLSOperState | read-only | current | The state of a particular QLLC connection. Inop, closed, opening, closing, recovery and opened are states defined in the IBM document SC30-3409-1 The X.25 1984… |
| 1.3.6.1.4.1.9.10.6.1.2.1.8 | ColumnqllcLSOperLgX25 | read-only | current | The largest QLLC packet allowed to go out on the QLLC/X.25 side. |
| 1.3.6.1.4.1.9.10.6.1.3 | TableqllcLSStatsTable | not-accessible | current | This table defines link station statistics kept for each qllc connection. |
| 1.3.6.1.4.1.9.10.6.1.3.1 | RowqllcLSStatsEntry | not-accessible | current | Link station statistics. |
| 1.3.6.1.4.1.9.10.6.1.3.1.1 | ColumnqllcLSStatsIfIndex | read-only | current | Interface Index value for the qllc connection. |
| 1.3.6.1.4.1.9.10.6.1.3.1.2 | ColumnqllcLSStatsLciVcIndex | read-only | current | The virtual circuit number for the logical channel identifier on this interface. |
| 1.3.6.1.4.1.9.10.6.1.3.1.3 | ColumnqllcLSStatsXidIn | read-only | current | The number of XIDs received from the LS on this VC. |
| 1.3.6.1.4.1.9.10.6.1.3.1.4 | ColumnqllcLSStatsXidOut | read-only | current | The number of XIDs sent to the LS on this VC. |
| 1.3.6.1.4.1.9.10.6.1.3.1.5 | ColumnqllcLSStatsTestIn | read-only | current | The number of TEST packets received from the LS on this VC. |
| 1.3.6.1.4.1.9.10.6.1.3.1.6 | ColumnqllcLSStatsTestOut | read-only | current | The number of TEST packets sent to the LS from this VC. |
| 1.3.6.1.4.1.9.10.6.1.3.1.7 | ColumnqllcLSStatsQuenchOff | read-only | current | The number of times the connection Quenched off for this connection. |
| 1.3.6.1.4.1.9.10.6.1.3.1.8 | ColumnqllcLSStatsQuenchOn | read-only | current | The number of times the connection Quenched on for this connection. |
| 1.3.6.1.4.1.9.10.6.1.3.1.9 | ColumnqllcLSStatsInPaks | read-only | current | The total number of information packets received on this interfaces. |
| 1.3.6.1.4.1.9.10.6.1.3.1.10 | ColumnqllcLSStatsOutPaks | read-only | current | The total number of information packets sent on this interfaces. |
| 1.3.6.1.4.1.9.10.6.1.3.1.11 | ColumnqllcLSStatsInBytes | read-only | current | The total number of bytes in the information packets received on this connection. |
| 1.3.6.1.4.1.9.10.6.1.3.1.12 | ColumnqllcLSStatsOutBytes | read-only | current | The total number of bytes in the information packets sent on this connection. |
| 1.3.6.1.4.1.9.10.6.1.3.1.13 | ColumnqllcLSStatsNumRcvQsms | read-only | current | The number of QSMs received on this connection. |
| 1.3.6.1.4.1.9.10.6.1.3.1.14 | ColumnqllcLSStatsNumSndQsms | read-only | current | The number of QSMs sent on this connection. |
| 1.3.6.1.4.1.9.10.6.1.3.1.15 | ColumnqllcLSStatsNumRcvDiscs | read-only | current | The number of DISCs received on this connection. |
| 1.3.6.1.4.1.9.10.6.1.3.1.16 | ColumnqllcLSStatsNumSndDiscs | read-only | current | The number of DISCs sent on this connection. |
| 1.3.6.1.4.1.9.10.6.1.3.1.17 | ColumnqllcLSStatsNumRcvDms | read-only | current | The number of DMs received on this connection. |
| 1.3.6.1.4.1.9.10.6.1.3.1.18 | ColumnqllcLSStatsNumSndDms | read-only | current | The number of DMs sent on this connection. |
| 1.3.6.1.4.1.9.10.6.1.3.1.19 | ColumnqllcLSStatsNumRcvFrmrs | read-only | current | The number of FRMRs received on this connection. |
| 1.3.6.1.4.1.9.10.6.1.3.1.20 | ColumnqllcLSStatsNumSndFrmrs | read-only | current | The number of FRMRs sent on this connection. |
| 1.3.6.1.4.1.9.10.6.1.3.1.21 | ColumnqllcLSStatsNumDrops | read-only | current | The number of packets dropped due to buffer allocation or other internal problems. |
| 1.3.6.1.4.1.9.10.6.1.3.1.22 | ColumnqllcLSStatsNumErrs | read-only | current | The number of HDLC protocol errors detected. |
| 1.3.6.1.4.1.9.10.6.2 | NodeqllcMibConformance | |||
| 1.3.6.1.4.1.9.10.6.2.1 | NodeqllcMibCompliances | |||
| 1.3.6.1.4.1.9.10.6.2.1.1 | ComplianceqllcMibCompliance | read-only | current | The compliance statement for QLLC nodes. |
| 1.3.6.1.4.1.9.10.6.2.2 | NodeqllcMibGroups | |||
| 1.3.6.1.4.1.9.10.6.2.2.1 | GroupqllcLSAdminGroup | current | A collection of objects providing configuration capability. | |
| 1.3.6.1.4.1.9.10.6.2.2.2 | GroupqllcLSOperGroup | current | A collection of objects providing operational control capability. | |
| 1.3.6.1.4.1.9.10.6.2.2.3 | GroupqllcLSStatsGroup | current | A collection of objects providing statistics. |