CISCO-REPEATER-MIB
32 objects
No module-level DESCRIPTION found.
Imported Objects
| CISCO-SMI | ciscoMgmt |
| SNMP-REPEATER-MIB | rptrPortEntry |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Gauge32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.22 | IdentityciscoRptrMIB | |||
| 1.3.6.1.4.1.9.9.22.1 | NodeciscoRptrMIBObjects | |||
| 1.3.6.1.4.1.9.9.22.1.1 | TableciscoRptrPortTable | not-accessible | current | Table of descriptive and status information about the ports. |
| 1.3.6.1.4.1.9.9.22.1.1.1 | RowciscoRptrPortEntry | not-accessible | current | An entry in the table, containing information about a single port. |
| 1.3.6.1.4.1.9.9.22.1.1.1.1 | ColumnciscoRptrPortMDIStatus | read-only | current | This object indicates the port's MDI/MDI-X switching status. The normal(1) status indicates the port is configured to be standard MDI as defined by the 10BaseT… |
| 1.3.6.1.4.1.9.9.22.1.1.1.2 | ColumnciscoRptrPortLinkTestEnabled | read-write | current | Specifies whether or not Link Integrity Test Function is enabled for the port as specified by the 10BaseT Standard. When the link test function is enabled, the… |
| 1.3.6.1.4.1.9.9.22.1.1.1.3 | ColumnciscoRptrPortLinkTestFailed | read-only | current | This object indicates the status of the Link Test function for the port. Set to false indicates valid data or 4 consecutive Link Test pulses have been detected… |
| 1.3.6.1.4.1.9.9.22.1.1.1.4 | ColumnciscoRptrPortAutoPolarityEnabled | read-write | current | Specifies whether or not the Automatic Receiver Polarity Reversal is enabled for the port. This feature provides the ability to invert the polarity of the sign… |
| 1.3.6.1.4.1.9.9.22.1.1.1.5 | ColumnciscoRptrPortAutoPolarityCorrected | read-only | current | This object indicates the status of the Automatic Receiver Polarity Reversal for the port. Set to true indicates the polarity of the port has been detected as … |
| 1.3.6.1.4.1.9.9.22.1.1.1.6 | ColumnciscoRptrPortSrcAddrCtrl | read-write | current | Specifies whether or not the Source Address Control feature is enabled for the port. This feature provides the ability to control which device's specific MAC a… |
| 1.3.6.1.4.1.9.9.22.1.1.1.7 | ColumnciscoRptrPortAllowedSrcAddr | read-write | current | For write access, this object is the allowed source address that is to be configured for source address control feature for the port. For read access, if no al… |
| 1.3.6.1.4.1.9.9.22.1.1.1.8 | ColumnciscoRptrPortAllowedSrcAddrStatus | read-only | current | This object indicates the status of ciscoRptrPortAllowedSrcAddr for the port. allowedSrcAddrConfig(1) status indicates that the allowed source address was expl… |
| 1.3.6.1.4.1.9.9.22.1.1.1.9 | ColumnciscoRptrPortLastIllegalSrcAddr | read-only | current | This object is the last illegal source address which caused this port to be partitioned. If the port is never partitioned due to Source Address Control, the ag… |
| 1.3.6.1.4.1.9.9.22.1.1.1.10 | ColumnciscoRptrPortIllegalAddrTrapAcked | read-write | current | Specifies whether an acknowledgment is sent by an NMS to indicate that an illegal source address trap was received. acked : Set by a NMS to acknowledge recepti… |
| 1.3.6.1.4.1.9.9.22.1.1.1.11 | ColumnciscoRptrPortIllegalAddrTrapEnabled | read-write | current | Specifies whether or not to send the illegal source address trap for the port. When it is enabled, one or more illegal source address traps will be generated i… |
| 1.3.6.1.4.1.9.9.22.1.1.1.12 | ColumnciscoRptrPortIllegalAddrFirstHeard | read-only | current | This is the time stamp for the very first time when the current illegal source address was detected on the port. The time stamp is given by the value of MIB-II… |
| 1.3.6.1.4.1.9.9.22.1.1.1.13 | ColumnciscoRptrPortIllegalAddrLastHeard | read-only | current | This is the time stamp for the last time when the current illegal source address was detected on the port. The time stamp is given by the value of MIB-II's sys… |
| 1.3.6.1.4.1.9.9.22.1.1.1.14 | ColumnciscoRptrPortLastIllegalAddrCount | read-only | current | This is the count of consecutive occurrences of the last illegal source address on the port. When illegal address is detected, this count will be incremented a… |
| 1.3.6.1.4.1.9.9.22.1.1.1.15 | ColumnciscoRptrPortIllegalAddrTotalCount | read-only | current | This is the total count of all cccurences of any illegal source addresses heard on the port since start-up. Note: Illegal source addresses may be different, ma… |
| 1.3.6.1.4.1.9.9.22.1.2 | NodeciscoRptrMIBglobal | |||
| 1.3.6.1.4.1.9.9.22.1.2.1 | ScalarciscoRptrTrapAlgorithm | read-write | current | Specifies how often trap(s) will be sent by the SNMP agent. once - The trap is only sent once. decay - The same trap is sent multiple times at approximately ex… |
| 1.3.6.1.4.1.9.9.22.2 | NodeciscoRptrMIBConformance | |||
| 1.3.6.1.4.1.9.9.22.2.1 | NodeciscoRptrMIBCompliances | |||
| 1.3.6.1.4.1.9.9.22.2.1.1 | ComplianceciscoRptrMIBCompliance | obsolete | The compliance statement for entities which implement the cisco Repeater MIB | |
| 1.3.6.1.4.1.9.9.22.2.1.2 | ComplianceciscoRptrMIBComplianceV11R01 | current | The compliance statement for entities which implement the cisco Repeater MIB | |
| 1.3.6.1.4.1.9.9.22.2.2 | NodeciscoRptrMIBGroups | |||
| 1.3.6.1.4.1.9.9.22.2.2.1 | GroupciscoRptrMIBGroup | obsolete | A collection of objects providing repeater ability. | |
| 1.3.6.1.4.1.9.9.22.2.2.2 | GroupciscoRptrMIBPortGroupV11R01 | current | A collection of objects for managing a repeater port. | |
| 1.3.6.1.4.1.9.9.22.2.2.3 | GroupciscoRptrMIBGlobalsGroup | current | A collection of objects apply to all repeater ports. | |
| 1.3.6.1.4.1.9.9.22.3 | NodeciscoRptrMIBTrapPrefix | |||
| 1.3.6.1.4.1.9.9.22.3.0 | NodeciscoRptrMIBTraps | |||
| 1.3.6.1.4.1.9.9.22.3.0.1 | NotificationciscoRptrIllegalSrcAddrTrap | current | When the illegal MAC source address violation is detected, the port is partitioned for one minute. In addition, this trap notification is generated. Note: rptr… |