CISCO-RTTMON-ICMP-MIB
121 objects
An extension to the CISCO-RTTMON-MIB for ICMP operations. The ICMP Jitter operation provides capability to measure metrics such as RTT (Round Trip Time), Jitter, packet loss, one-way latency by sending ICMP TIMESTAMP stream to the destination devices.
Imported Objects
| CISCO-RTTMON-MIB | rttMonCtrlAdminIndex rttMonLatestOper rttMonStats |
| CISCO-RTTMON-TC-MIB | RttResponseSense |
| CISCO-SMI | ciscoMgmt |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Gauge32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | TimeStamp |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.42.1.3.8 | TablerttMonIcmpJitterStatsTable | not-accessible | current | The ICMP Jitter statistics table contains summarized information of the results for a conceptual RTT control row. A rolling accumulated history of this informa… |
| 1.3.6.1.4.1.9.9.42.1.3.8.1 | RowrttMonIcmpJitterStatsEntry | not-accessible | current | An entry in ICMP jitter stats table. Each entry contains the objects which accumulate the results of a series of RTT operations over a 60 minute time period or… |
| 1.3.6.1.4.1.9.9.42.1.3.8.1.1 | ColumnrttMonIcmpJitterStatsStartTimeId | not-accessible | current | The value of sysUpTime at the time when this row was created. |
| 1.3.6.1.4.1.9.9.42.1.3.8.1.2 | ColumnrttMonIcmpJitterStatsCompletions | read-only | current | The number of ICMP jitter operation that have completed successfully. |
| 1.3.6.1.4.1.9.9.42.1.3.8.1.3 | ColumnrttMonIcmpJStatsOverThresholds | read-only | current | The number of ICMP jitter operations that violate jitterAvg threshold which is defined in RttMonReactVar. |
| 1.3.6.1.4.1.9.9.42.1.3.8.1.4 | ColumnrttMonIcmpJitterStatsNumRTTs | read-only | current | The number of RTT's that are successfully measured. |
| 1.3.6.1.4.1.9.9.42.1.3.8.1.5 | ColumnrttMonIcmpJitterStatsRTTSums | read-only | current | The sum of RTT's that are successfully measured for this rttMonIcmpJitterStatsStartTimeId hourly group. The number of the successfully measured RTT is stored i… |
| 1.3.6.1.4.1.9.9.42.1.3.8.1.6 | ColumnrttMonIcmpJStatsRTTSum2Lows | read-only | current | The sum of squares of RTT's that are successfully measured (low order 32 bits). |
| 1.3.6.1.4.1.9.9.42.1.3.8.1.7 | ColumnrttMonIcmpJStatsRTTSum2Highs | read-only | current | The sum of squares of RTT's that are successfully measured (high order 32 bits). |
| 1.3.6.1.4.1.9.9.42.1.3.8.1.8 | ColumnrttMonIcmpJitterStatsRTTMin | read-only | current | The minimum of RTT's that were successfully measured. |
| 1.3.6.1.4.1.9.9.42.1.3.8.1.9 | ColumnrttMonIcmpJitterStatsRTTMax | read-only | current | The maximum of RTT's that were successfully measured. |
| 1.3.6.1.4.1.9.9.42.1.3.8.1.10 | ColumnrttMonIcmpJitterStatsMinPosSD | read-only | current | The minimum of absolute values of all positive jitter values for packets sent from source to destination. |
| 1.3.6.1.4.1.9.9.42.1.3.8.1.11 | ColumnrttMonIcmpJitterStatsMaxPosSD | read-only | current | The maximum of absolute values of all positive jitter values for packets sent from source to destination. |
| 1.3.6.1.4.1.9.9.42.1.3.8.1.12 | ColumnrttMonIcmpJitterStatsNumPosSDs | read-only | current | The number of all positive jitter values for packets sent from source to destination. |
| 1.3.6.1.4.1.9.9.42.1.3.8.1.13 | ColumnrttMonIcmpJitterStatsSumPosSDs | read-only | current | The sum of all positive jitter values for packets sent from source to destination. The number of such values is stored in rttMonIcmpJitterStatsNumPosSD. |
| 1.3.6.1.4.1.9.9.42.1.3.8.1.14 | ColumnrttMonIcmpJStatsSum2PosSDLows | read-only | current | The sum of square of all positive jitter values for packets sent from source to destination (low order 32 bits). |
| 1.3.6.1.4.1.9.9.42.1.3.8.1.15 | ColumnrttMonIcmpJStatsSum2PosSDHighs | read-only | current | The sum of square of all positive jitter values for packets sent from source to destination (high order 32 bits). |
| 1.3.6.1.4.1.9.9.42.1.3.8.1.16 | ColumnrttMonIcmpJitterStatsMinNegSD | read-only | current | The minimum of all negative jitter values for packets sent from source to destination. |
| 1.3.6.1.4.1.9.9.42.1.3.8.1.17 | ColumnrttMonIcmpJitterStatsMaxNegSD | read-only | current | The maximum of all negative jitter values for packets sent from source to destination. |
| 1.3.6.1.4.1.9.9.42.1.3.8.1.18 | ColumnrttMonIcmpJitterStatsNumNegSDs | read-only | current | The number of all negative jitter values for packets sent from source to destination. |
| 1.3.6.1.4.1.9.9.42.1.3.8.1.19 | ColumnrttMonIcmpJitterStatsSumNegSDs | read-only | current | The sum of all negative jitter values for packets sent from source to destination. The number of such values is stored in rttMonIcmpJitterStatsNumNegSD. |
| 1.3.6.1.4.1.9.9.42.1.3.8.1.20 | ColumnrttMonIcmpJStatsSum2NegSDLows | read-only | current | The sum of square of all negative jitter values for packets sent from source to destination (low order 32 bits). |
| 1.3.6.1.4.1.9.9.42.1.3.8.1.21 | ColumnrttMonIcmpJStatsSum2NegSDHighs | read-only | current | The sum of square of all negative jitter values for packets sent from source to destination (high order 32 bits). |
| 1.3.6.1.4.1.9.9.42.1.3.8.1.22 | ColumnrttMonIcmpJitterStatsMinPosDS | read-only | current | The minimum of all positive jitter values for packets sent from destination to source. |
| 1.3.6.1.4.1.9.9.42.1.3.8.1.23 | ColumnrttMonIcmpJitterStatsMaxPosDS | read-only | current | The maximum of all positive jitter values for packets sent from destination to source. |
| 1.3.6.1.4.1.9.9.42.1.3.8.1.24 | ColumnrttMonIcmpJitterStatsNumPosDSes | read-only | current | The number of all positive jitter values for packets sent from destination to source. |
| 1.3.6.1.4.1.9.9.42.1.3.8.1.25 | ColumnrttMonIcmpJitterStatsSumPosDSes | read-only | current | The sum of all positive jitter values for packets sent from destination to source. The number of such values is stored in rttMonIcmpJitterStatsNumPosDS. |
| 1.3.6.1.4.1.9.9.42.1.3.8.1.26 | ColumnrttMonIcmpJStatsSum2PosDSLows | read-only | current | The sum of squares of all positive jitter values for packets sent from destination to source (low order 32 bits). |
| 1.3.6.1.4.1.9.9.42.1.3.8.1.27 | ColumnrttMonIcmpJStatsSum2PosDSHighs | read-only | current | The sum of squares of all positive jitter values for packets sent from destination to source (high order 32 bits). |
| 1.3.6.1.4.1.9.9.42.1.3.8.1.28 | ColumnrttMonIcmpJitterStatsMinNegDS | read-only | current | The minimum of all negative jitter values for packets sent from destination to source. |
| 1.3.6.1.4.1.9.9.42.1.3.8.1.29 | ColumnrttMonIcmpJitterStatsMaxNegDS | read-only | current | The maximum of all negative jitter values for packets sent from destination to source. |
| 1.3.6.1.4.1.9.9.42.1.3.8.1.30 | ColumnrttMonIcmpJitterStatsNumNegDSes | read-only | current | The number of all negative jitter values for packets sent from destination to source. |
| 1.3.6.1.4.1.9.9.42.1.3.8.1.31 | ColumnrttMonIcmpJitterStatsSumNegDSes | read-only | current | The sum of all negative jitter values for packets sent from destination to source. The number of such values is stored in rttMonIcmpJitterStatsNumNegDS. |
| 1.3.6.1.4.1.9.9.42.1.3.8.1.32 | ColumnrttMonIcmpJStatsSum2NegDSLows | read-only | current | The sum of squares of all negative jitter values for packets sent from destination to source (low order 32 bits). |
| 1.3.6.1.4.1.9.9.42.1.3.8.1.33 | ColumnrttMonIcmpJStatsSum2NegDSHighs | read-only | current | The sum of squares of all negative jitter values for packets sent from destination to source (high order 32 bits). |
| 1.3.6.1.4.1.9.9.42.1.3.8.1.34 | ColumnrttMonIcmpJitterStatsPktLosses | read-only | current | The number of lost packets |
| 1.3.6.1.4.1.9.9.42.1.3.8.1.35 | ColumnrttMonIcmpJStatsPktOutSeqBoth | read-only | current | The number of packets arrived out of sequence in both source-to-destination and destination-to-source direction. |
| 1.3.6.1.4.1.9.9.42.1.3.8.1.36 | ColumnrttMonIcmpJStatsPktOutSeqSDs | read-only | current | The number of packets arrived out of sequence in the direction of source-to-destination. |
| 1.3.6.1.4.1.9.9.42.1.3.8.1.37 | ColumnrttMonIcmpJStatsPktOutSeqDSes | read-only | current | The number of packets arrived out of sequence in the direction of destination-to-source. |
| 1.3.6.1.4.1.9.9.42.1.3.8.1.38 | ColumnrttMonIcmpJitterStatsPktSkippeds | read-only | current | The number of packets that are skipped per operation because the router could not send the packet out. |
| 1.3.6.1.4.1.9.9.42.1.3.8.1.39 | ColumnrttMonIcmpJitterStatsErrors | read-only | current | The number of occasions when a ICMP jitter operation could not be initiated because of an internal error |
| 1.3.6.1.4.1.9.9.42.1.3.8.1.40 | ColumnrttMonIcmpJitterStatsBusies | read-only | current | The number of occasions when a ICMP jitter operation could not be initiated because a previous ICMP jitter operation has not been completed. |
| 1.3.6.1.4.1.9.9.42.1.3.8.1.41 | ColumnrttMonIcmpJitterStatsOWSumSDs | read-only | current | The sum of one way trip time from source to destination. |
| 1.3.6.1.4.1.9.9.42.1.3.8.1.42 | ColumnrttMonIcmpJStatsOWSum2SDLows | read-only | current | The sum of squares of one way trip time from source to destination (low order 32 bits). |
| 1.3.6.1.4.1.9.9.42.1.3.8.1.43 | ColumnrttMonIcmpJStatsOWSum2SDHighs | read-only | current | The sum of squares of one way trip time from source to destination (high order 32 bits). |
| 1.3.6.1.4.1.9.9.42.1.3.8.1.44 | ColumnrttMonIcmpJitterStatsOWMinSD | read-only | current | The minimum of all one way trip time from source to destination. |
| 1.3.6.1.4.1.9.9.42.1.3.8.1.45 | ColumnrttMonIcmpJitterStatsOWMaxSD | read-only | current | The maximum of all one way trip time from source to destination. |
| 1.3.6.1.4.1.9.9.42.1.3.8.1.46 | ColumnrttMonIcmpJitterStatsOWSumDSes | read-only | current | The sum of one way trip time from destination to source. |
| 1.3.6.1.4.1.9.9.42.1.3.8.1.47 | ColumnrttMonIcmpJStatsOWSum2DSLows | read-only | current | The sum of squares of one way trip time from destination to source (low order 32 bits). |
| 1.3.6.1.4.1.9.9.42.1.3.8.1.48 | ColumnrttMonIcmpJStatsOWSum2DSHighs | read-only | current | The sum of squares of one way trip time from destination to source (high order 32 bits). |
| 1.3.6.1.4.1.9.9.42.1.3.8.1.49 | ColumnrttMonIcmpJitterStatsOWMinDS | read-only | current | The minimum of all one way trip time from destination to source. |
| 1.3.6.1.4.1.9.9.42.1.3.8.1.50 | ColumnrttMonIcmpJitterStatsOWMaxDS | read-only | current | The maximum of all one way trip time from destination to source. |
| 1.3.6.1.4.1.9.9.42.1.3.8.1.51 | ColumnrttMonIcmpJitterStatsNumOWs | read-only | current | The number of one way trip time that are successfully measured. |
| 1.3.6.1.4.1.9.9.42.1.3.8.1.52 | ColumnrttMonIcmpJitterStatsAvgJ | read-only | current | The average of positive and negative jitter values for source-to-destination and destination-to-source direction. |
| 1.3.6.1.4.1.9.9.42.1.3.8.1.53 | ColumnrttMonIcmpJitterStatsAvgJSD | read-only | current | The average of positive and negative jitter values in source-to-destination direction. |
| 1.3.6.1.4.1.9.9.42.1.3.8.1.54 | ColumnrttMonIcmpJitterStatsAvgJDS | read-only | current | The average of positive and negative jitter values in destination-to-source direction. |
| 1.3.6.1.4.1.9.9.42.1.3.8.1.55 | ColumnrttMonIcmpJitterMinSucPktLoss | read-only | current | The minimum number of packets that are dropped successively. |
| 1.3.6.1.4.1.9.9.42.1.3.8.1.56 | ColumnrttMonIcmpJitterMaxSucPktLoss | read-only | current | The maximum number of packets that are dropped successively. |
| 1.3.6.1.4.1.9.9.42.1.3.8.1.57 | ColumnrttMonIcmpJitterStatsIAJOut | read-only | current | Inter-arrival jitter (RFC 1889) at responder |
| 1.3.6.1.4.1.9.9.42.1.3.8.1.58 | ColumnrttMonIcmpJitterStatsIAJIn | read-only | current | Inter-arrival jitter (RFC 1889) at sender |
| 1.3.6.1.4.1.9.9.42.1.3.8.1.59 | ColumnrttMonIcmpJitterStatsPktLateAs | read-only | current | The number of packets that arrived after the timeout. |
| 1.3.6.1.4.1.9.9.42.1.5.4 | TablerttMonLatestIcmpJitterOperTable | not-accessible | current | A table which contains the status of latest ICMP Jitter operation. Each conceptual row corresponds to a ICMP jitter probe defined in rttMonCtrlAdminTable and h… |
| 1.3.6.1.4.1.9.9.42.1.5.4.1 | RowrttMonLatestIcmpJitterOperEntry | not-accessible | current | A list of objects that record the latest ICMP jitter operation. |
| 1.3.6.1.4.1.9.9.42.1.5.4.1.1 | ColumnrttMonLatestIcmpJitterNumRTT | read-only | current | The number of RTT's that were successfully measured. |
| 1.3.6.1.4.1.9.9.42.1.5.4.1.2 | ColumnrttMonLatestIcmpJitterRTTSum | read-only | current | The sum of RTT's that are successfully measured. The number of successfully measured RTT is stored in rttMonLatestIcmpJitterNumRTT. |
| 1.3.6.1.4.1.9.9.42.1.5.4.1.3 | ColumnrttMonLatestIcmpJitterRTTSum2 | read-only | current | The sum of squares of RTT's that are successfully measured. |
| 1.3.6.1.4.1.9.9.42.1.5.4.1.4 | ColumnrttMonLatestIcmpJitterRTTMin | read-only | current | The minimum of RTT's that were successfully measured. |
| 1.3.6.1.4.1.9.9.42.1.5.4.1.5 | ColumnrttMonLatestIcmpJitterRTTMax | read-only | current | The maximum of RTT's that were successfully measured. |
| 1.3.6.1.4.1.9.9.42.1.5.4.1.6 | ColumnrttMonLatestIcmpJitterMinPosSD | read-only | current | The minimum of all positive jitter values for packets sent from source to destination. |
| 1.3.6.1.4.1.9.9.42.1.5.4.1.7 | ColumnrttMonLatestIcmpJitterMaxPosSD | read-only | current | The maximum of all positive jitter values for packets sent from source to destination. |
| 1.3.6.1.4.1.9.9.42.1.5.4.1.8 | ColumnrttMonLatestIcmpJitterNumPosSD | read-only | current | The number of all positive jitter values for packets sent from source to destination. |
| 1.3.6.1.4.1.9.9.42.1.5.4.1.9 | ColumnrttMonLatestIcmpJitterSumPosSD | read-only | current | The sum of all positive jitter values for packets sent source to destination. The number of such values is stored in rttMonLatestIcmpJitterNumPosSD. |
| 1.3.6.1.4.1.9.9.42.1.5.4.1.10 | ColumnrttMonLatestIcmpJitterSum2PosSD | read-only | current | The sum of square of all positive jitter values for packets sent from source to destination. |
| 1.3.6.1.4.1.9.9.42.1.5.4.1.11 | ColumnrttMonLatestIcmpJitterMinNegSD | read-only | current | The minimum of absolute values of all negative jitter values for packets sent from source to destination. |
| 1.3.6.1.4.1.9.9.42.1.5.4.1.12 | ColumnrttMonLatestIcmpJitterMaxNegSD | read-only | current | The maximum of absolute values of all negative jitter values for packets sent from source to destination. |
| 1.3.6.1.4.1.9.9.42.1.5.4.1.13 | ColumnrttMonLatestIcmpJitterNumNegSD | read-only | current | The number of all negative jitter values for packets sent from source to destination. |
| 1.3.6.1.4.1.9.9.42.1.5.4.1.14 | ColumnrttMonLatestIcmpJitterSumNegSD | read-only | current | The sum of all negative jitter values for packets sent from source to destination. The number of such values is stored in rttMonLatestIcmpJitterNumNegSD. |
| 1.3.6.1.4.1.9.9.42.1.5.4.1.15 | ColumnrttMonLatestIcmpJitterSum2NegSD | read-only | current | The sum of square of all negative jitter values for packets sent from source to destination. |
| 1.3.6.1.4.1.9.9.42.1.5.4.1.16 | ColumnrttMonLatestIcmpJitterMinPosDS | read-only | current | The minimum of all positive jitter values for packets sent from destination to source. |
| 1.3.6.1.4.1.9.9.42.1.5.4.1.17 | ColumnrttMonLatestIcmpJitterMaxPosDS | read-only | current | The maximum of all positive jitter values for packets sent from destination to source. |
| 1.3.6.1.4.1.9.9.42.1.5.4.1.18 | ColumnrttMonLatestIcmpJitterNumPosDS | read-only | current | The number of all positive jitter values for packets sent from destination to source. |
| 1.3.6.1.4.1.9.9.42.1.5.4.1.19 | ColumnrttMonLatestIcmpJitterSumPosDS | read-only | current | The sum of all positive jitter values for packets sent from destination to source. The number of such values is stored in rttMonLatestIcmpJitterNumPosDS. |
| 1.3.6.1.4.1.9.9.42.1.5.4.1.20 | ColumnrttMonLatestIcmpJitterSum2PosDS | read-only | current | The sum of squares of all positive jitter values for packets sent from destination to source. |
| 1.3.6.1.4.1.9.9.42.1.5.4.1.21 | ColumnrttMonLatestIcmpJitterMinNegDS | read-only | current | The minimum of all negative jitter values for packets sent from destination to source. |
| 1.3.6.1.4.1.9.9.42.1.5.4.1.22 | ColumnrttMonLatestIcmpJitterMaxNegDS | read-only | current | The maximum of all negative jitter values for packets sent from destination to source. |
| 1.3.6.1.4.1.9.9.42.1.5.4.1.23 | ColumnrttMonLatestIcmpJitterNumNegDS | read-only | current | The number of all negative jitter values for packets sent from destination to source. |
| 1.3.6.1.4.1.9.9.42.1.5.4.1.24 | ColumnrttMonLatestIcmpJitterSumNegDS | read-only | current | The sum of all negative jitter values for packets sent from destination to source. The number of such values is stored in rttMonLatestIcmpJitterNumNegDS. |
| 1.3.6.1.4.1.9.9.42.1.5.4.1.25 | ColumnrttMonLatestIcmpJitterSum2NegDS | read-only | current | The sum of squares of all negative jitter values for packets sent from destination to source. |
| 1.3.6.1.4.1.9.9.42.1.5.4.1.26 | ColumnrttMonLatestIcmpJitterPktLoss | read-only | current | The number of packets lost. |
| 1.3.6.1.4.1.9.9.42.1.5.4.1.27 | ColumnrttMonLatestIcmpJPktOutSeqBoth | read-only | current | The number of packets arrived out of sequence in both source-to-destination and destination-to-source direction. |
| 1.3.6.1.4.1.9.9.42.1.5.4.1.28 | ColumnrttMonLatestIcmpJPktOutSeqSD | read-only | current | The number of packets arrived out of sequence in the direction of source-to-destination. |
| 1.3.6.1.4.1.9.9.42.1.5.4.1.29 | ColumnrttMonLatestIcmpJPktOutSeqDS | read-only | current | The number of packets arrived out of sequence in the direction of destination-to-source. |
| 1.3.6.1.4.1.9.9.42.1.5.4.1.30 | ColumnrttMonLatestIcmpJitterPktSkipped | read-only | current | The number of packets in the operation that could not be initiated due to an internal error. |
| 1.3.6.1.4.1.9.9.42.1.5.4.1.31 | ColumnrttMonLatestIcmpJitterSense | read-only | current | An application specific sense code for the completion status. |
| 1.3.6.1.4.1.9.9.42.1.5.4.1.32 | ColumnrttMonLatestIcmpJitterPktLateA | read-only | current | The number of packets that arrived after the timeout. |
| 1.3.6.1.4.1.9.9.42.1.5.4.1.33 | ColumnrttMonLatestIcmpJitterMinSucPktL | read-only | current | The minimum number of packets that are dropped successively. |
| 1.3.6.1.4.1.9.9.42.1.5.4.1.34 | ColumnrttMonLatestIcmpJitterMaxSucPktL | read-only | current | The maximum number of packets that are dropped successively. |
| 1.3.6.1.4.1.9.9.42.1.5.4.1.35 | ColumnrttMonLatestIcmpJitterOWSumSD | read-only | current | The sum of one way trip time from source to destination. |
| 1.3.6.1.4.1.9.9.42.1.5.4.1.36 | ColumnrttMonLatestIcmpJitterOWSum2SD | read-only | current | The sum of squares of one way trip time from source to destination. |
| 1.3.6.1.4.1.9.9.42.1.5.4.1.37 | ColumnrttMonLatestIcmpJitterOWMinSD | read-only | current | The minimum of all one way trip time from source to destination. |
| 1.3.6.1.4.1.9.9.42.1.5.4.1.38 | ColumnrttMonLatestIcmpJitterOWMaxSD | read-only | current | The maximum of all one way trip time from source to destination. |
| 1.3.6.1.4.1.9.9.42.1.5.4.1.39 | ColumnrttMonLatestIcmpJitterOWSumDS | read-only | current | The sum of one way trip time from destination to source. |
| 1.3.6.1.4.1.9.9.42.1.5.4.1.40 | ColumnrttMonLatestIcmpJitterOWSum2DS | read-only | current | The sum of squares of one way trip time from destination to source. |
| 1.3.6.1.4.1.9.9.42.1.5.4.1.41 | ColumnrttMonLatestIcmpJitterOWMinDS | read-only | current | The minimum of all one way trip time from destination to source. |
| 1.3.6.1.4.1.9.9.42.1.5.4.1.42 | ColumnrttMonLatestIcmpJitterOWMaxDS | read-only | current | The maximum of all one way trip time from destination to source. |
| 1.3.6.1.4.1.9.9.42.1.5.4.1.43 | ColumnrttMonLatestIcmpJitterNumOW | read-only | current | The number of successful one way trip time measurements. |
| 1.3.6.1.4.1.9.9.42.1.5.4.1.44 | ColumnrttMonLatestIcmpJitterAvgJitter | read-only | current | The average of positive and negative jitter values in Source-to-Destionation and Destination-to-Source direction. |
| 1.3.6.1.4.1.9.9.42.1.5.4.1.45 | ColumnrttMonLatestIcmpJitterAvgSDJ | read-only | current | The average of positive and negative jitter values from source to destination. |
| 1.3.6.1.4.1.9.9.42.1.5.4.1.46 | ColumnrttMonLatestIcmpJitterAvgDSJ | read-only | current | The average of positive and negative jitter values from destination to source. |
| 1.3.6.1.4.1.9.9.42.1.5.4.1.47 | ColumnrttMonLatestIcmpJitterOWAvgSD | read-only | current | The average one way trip time from source to destination. |
| 1.3.6.1.4.1.9.9.42.1.5.4.1.48 | ColumnrttMonLatestIcmpJitterOWAvgDS | read-only | current | The average one way trip time from destination to source. |
| 1.3.6.1.4.1.9.9.42.1.5.4.1.49 | ColumnrttMonLatestIcmpJitterIAJOut | read-only | current | Inter-arrival jitter (RFC 1889) at responder. |
| 1.3.6.1.4.1.9.9.42.1.5.4.1.50 | ColumnrttMonLatestIcmpJitterIAJIn | read-only | current | Inter-arrival jitter (RFC 1889) at source. |
| 1.3.6.1.4.1.9.9.486 | IdentityciscoRttMonIcmpMIB | An extension to the CISCO-RTTMON-MIB for ICMP operations. The ICMP Jitter operation provides capability to measure metrics such as RTT (Round Trip Time), Jitte… | ||
| 1.3.6.1.4.1.9.9.486.0 | NodeciscoRttMonIcmpMIBNotifs | |||
| 1.3.6.1.4.1.9.9.486.1 | NodeciscoRttMonIcmpMIBObjects | |||
| 1.3.6.1.4.1.9.9.486.2 | NodeciscoRttMonIcmpMIBConform | |||
| 1.3.6.1.4.1.9.9.486.2.1 | NodeciscoRttMonIcmpCompliances | |||
| 1.3.6.1.4.1.9.9.486.2.1.1 | ComplianceciscoRttMonIcmpJitterCompliance | current | The compliance statement for (1) ICMP Jitter operation and statistics | |
| 1.3.6.1.4.1.9.9.486.2.2 | NodeciscoRttMonIcmpMIBGroups | |||
| 1.3.6.1.4.1.9.9.486.2.2.1 | GroupciscoRttMonIcmpJitterGroup | current | A collection of statistics objects related to ICMP Jitter Probe. |