CISCO-VISM-DSX1-MIB
92 objects
The MIB module to configure DS1/E1 interface objects in a Voice Interworking Service Module (VISM) module. This MIB is an extension to CISCO-MGX82XX-DSX1-MIB for DS1/E1 configuration in VISM. Terms used: CID: Channel Identifier CAS: Channel Associated Signaling CCS: Common Channel Signaling DTMF: Dual Tone Multi Frequency NSE: Name Signal Event NTE: Name Telephony Event PVC: Permanent Virtual Circuit
Imported Objects
| BASIS-MIB | dsx1 |
| CISCO-MGX82XX-DSX1-MIB | dsx1AlmGrp |
| CISCOWAN-SMI | ciscoWan |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.351.110.4.3.1.3.2 | Tabledsx1AlmHistoryTable | not-accessible | current | The TDM line interface alarm history table. |
| 1.3.6.1.4.1.351.110.4.3.1.3.2.1 | Rowdsx1AlmHistoryEntry | not-accessible | current | An entry in the DS1/E1 Alarm History table. |
| 1.3.6.1.4.1.351.110.4.3.1.3.2.1.1 | ColumnalmlineNumber | read-only | current | This object is the identifier of a DS1/E1 Interface on a managed device. |
| 1.3.6.1.4.1.351.110.4.3.1.3.2.1.2 | ColumnalmIntervalNumber | read-only | current | This is the alarm interval number which associates with time interval alarms occurred. |
| 1.3.6.1.4.1.351.110.4.3.1.3.2.1.3 | ColumnlCV | read-only | current | The accumulated number of Line code violations encountered on the DS1 interface. |
| 1.3.6.1.4.1.351.110.4.3.1.3.2.1.4 | ColumnlES | read-only | current | The accumulated number of Line code violations Errored Seconds encountered on the DS1 interface. |
| 1.3.6.1.4.1.351.110.4.3.1.3.2.1.5 | ColumnlSES | read-only | current | The accumulated number of LCV (Line Code Violations) Severely Errored Seconds encountered on the DS1 interface. |
| 1.3.6.1.4.1.351.110.4.3.1.3.2.1.6 | ColumncRC | read-only | current | The accumulated number of P Bit code violations encountered on the DS1 interface. |
| 1.3.6.1.4.1.351.110.4.3.1.3.2.1.7 | ColumncRCES | read-only | current | The accumulated number of PVC Errored Seconds encountered on the DS1 interface. |
| 1.3.6.1.4.1.351.110.4.3.1.3.2.1.8 | ColumncRCSES | read-only | current | The accumulated number of P Bit code violations Severely Errored Seconds encountered on the DS1 interface. |
| 1.3.6.1.4.1.351.110.4.3.1.3.2.1.9 | ColumnsEFS | read-only | current | The accumulated number of Severely Errored Framing Seconds encountered on the DS1 interface. |
| 1.3.6.1.4.1.351.110.4.3.1.3.2.1.10 | ColumnaISS | read-only | current | The accumulated number of AIS Severely Errored Seconds encountered on the DS1 interface. |
| 1.3.6.1.4.1.351.110.4.3.1.3.2.1.11 | ColumnuAS | read-only | current | The accumulated number of Unavailable Seconds encountered on the DS1 interface. |
| 1.3.6.1.4.1.351.110.4.3.1.3.2.1.12 | ColumnpercentErrorFreeSecs | read-only | current | The accumulated the percentage of LCV (Line Code Violation) Error Free Seconds. |
| 1.3.6.1.4.1.351.110.4.3.1.3.2.1.13 | ColumnrcvLOSCnt | read-only | current | The accumulated number of LOS (Loss of Signal) detected with or without integrating to LOS alarm on the DS1 interface. |
| 1.3.6.1.4.1.351.110.4.3.1.3.2.1.14 | ColumnrcvOOFCnt | read-only | current | The accumulated number of OOF (Out of Frame) detected with or without integrating to OOF alarm on the DS1 interface. |
| 1.3.6.1.4.1.351.110.4.3.1.3.2.1.15 | ColumnrcvRAICnt | read-only | current | The accumulated number of Yellow Alarms detected with or without integrating to RAI alarm on the DS1 interface. |
| 1.3.6.1.4.1.351.110.4.3.1.3.2.1.16 | ColumnrcvFECnt | read-only | current | The accumulated number of Framing Pattern Errors encountered on a DS1/E1 interface. |
| 1.3.6.1.4.1.351.110.4.3.1.3.2.1.17 | Columndsx1AlmClrButton | read-write | current | This variable is used to clear all the alarms for the line/interval. |
| 1.3.6.1.4.1.351.110.4.3.1.3.2.1.18 | Columndsx1TxUncontrolledSlips | read-only | current | This counter counts the number of uncontrolled slips in the transmit direction during this interval. |
| 1.3.6.1.4.1.351.110.4.3.1.3.2.1.19 | Columndsx1RxUncontrolledSlips | read-only | current | This counter counts the number of uncontrolled slips in the receive direction during this interval. |
| 1.3.6.1.4.1.351.110.4.3.1.3.2.1.20 | Columndsx1TxFrameSlips | read-only | current | This counter counts the number of frame slips in the transmit direction during this interval. |
| 1.3.6.1.4.1.351.110.4.3.1.3.2.1.21 | Columndsx1RxFrameSlips | read-only | current | This counter counts the number of frame slips in the receive direction during this interval. |
| 1.3.6.1.4.1.351.110.4.3.5 | Nodedsx1Vism | |||
| 1.3.6.1.4.1.351.110.4.3.5.1 | Nodedsx1VismCnfGrp | |||
| 1.3.6.1.4.1.351.110.4.3.5.1.1 | Tabledsx1VismCnfGrpTable | not-accessible | current | The VISM specific DS1/E1 configuration table. This table contains the additional VISM configuration information for DS1/E1. |
| 1.3.6.1.4.1.351.110.4.3.5.1.1.1 | Rowdsx1VismCnfGrpEntry | not-accessible | current | An entry in the VISM Dsx1 Configuration table. An entry is created when a DS1/E1 is added. An entry is deleted when a DS1/E1 is deleted. The DS1/E1 is specify … |
| 1.3.6.1.4.1.351.110.4.3.5.1.1.1.1 | ColumnvismLineNum | read-only | current | This object identifies the DS1/E1 interface number. |
| 1.3.6.1.4.1.351.110.4.3.5.1.1.1.2 | ColumnvismEcanEnabled | read-write | current | This object disable/enable echo cancellation. 'disable' : disable echo cancellation. 'enable' : enable echo cancellation. |
| 1.3.6.1.4.1.351.110.4.3.5.1.1.1.3 | ColumnvismEcanToneDisable | read-only | deprecated | This object determines the behavior of the echo canceler in the presence of a modem. 'ignore': Ignore 2100 Hz modem answer tone. 'g-164' : G-164 mode, disable … |
| 1.3.6.1.4.1.351.110.4.3.5.1.1.1.4 | ColumnvismEcanCnfNRN | read-only | deprecated | Echo canceler re-enable (NRN). This object determines when an echo canceler re-enable and begins cancellation after it has been disabled. 'reenableOnModemData'… |
| 1.3.6.1.4.1.351.110.4.3.5.1.1.1.5 | ColumnvismEcanTail | read-write | current | This object identifies the maximum tail. The object should be set just higher than the worst round trip delay anticipated. Convergence times may increase for l… |
| 1.3.6.1.4.1.351.110.4.3.5.1.1.1.6 | ColumnvismEcanREC | read-write | current | Residual Echo Control (REC) instructs the canceler how to treat echo remaining after cancellation. 'cancelOnly' : REC is disabled. 'suppressResidual': The resi… |
| 1.3.6.1.4.1.351.110.4.3.5.1.1.1.7 | ColumnvismCompCnfVAD | read-write | current | This object identifies VAD (Voice Activity Detection). 'disable': Disable VAD on the compression DSPs. 'enable' : Enable VAD on the compression DSPs. |
| 1.3.6.1.4.1.351.110.4.3.5.1.1.1.8 | ColumnvismSignalingType | read-write | current | This object specifies the type of signaling used for the line. 'cas' : Channel Associated Signaling. 'ccs' : Common Channel Signaling. 'none' : No signaling us… |
| 1.3.6.1.4.1.351.110.4.3.5.1.1.1.9 | ColumnvismCcsChannels | read-write | current | This object describes the CCS signaling channels or DS0s (also referred to as D-channel). It is used only for lines configured as CCS signaling type. It is a b… |
| 1.3.6.1.4.1.351.110.4.3.5.1.1.1.10 | ColumnvismCadenceTime | read-only | deprecated | This object describes the cadence time for CAS signals. This object is applicable only for CAS backhaul applications. For trunking application it is not applic… |
| 1.3.6.1.4.1.351.110.4.3.5.1.1.1.11 | ColumnvismTrunkConditionEnable | read-write | current | This object determines if trunk conditioning should be enabled or disabled on this line. If this object is set to true(1), VISM will do trunk conditioning on t… |
| 1.3.6.1.4.1.351.110.4.3.5.1.1.1.12 | ColumnvismDsx1CircuitIdentifier | read-write | current | This object is the identifier of a T1/E1 line. It contains alphanumeric description of a line for the purpose of better identification. |
| 1.3.6.1.4.1.351.110.4.3.5.1.1.1.13 | ColumnvismDsx1TxDigitOrder | read-write | current | When the call agent hands the ANI (Automatic Number Identification, denoting the calling party number) and the DNIS (Destination Number Identification Service,… |
| 1.3.6.1.4.1.351.110.4.3.5.1.1.1.14 | ColumnvismDsx1TonePlanRegion | read-write | current | This object specifies regional tone plan string. If the value of the object is 'NULL' then it will be considered non usable, and non 'NULL' is (usable or activ… |
| 1.3.6.1.4.1.351.110.4.3.5.1.1.1.15 | ColumnvismDsx1TonePlanVersion | read-write | current | This object will either be considered NULL (i.e. non usable) or non NULL (usable or activated and related to an entry in the vismTonePlanTable table). This obj… |
| 1.3.6.1.4.1.351.110.4.3.5.1.1.1.16 | ColumnvismDsx1RingingTO | read-write | current | Time in seconds for which the ringing cadence will be generated towards the basic PBX unless interrupted (e.g. by the answer from the called party or a delete … |
| 1.3.6.1.4.1.351.110.4.3.5.1.1.1.17 | ColumnvismDsx1RingBackTO | read-write | current | Time in seconds for which the local ring back tone (towards the TDM) will be generated unless interrupted (e.g. by the answer from the called party or a delete… |
| 1.3.6.1.4.1.351.110.4.3.5.1.1.1.18 | ColumnvismDsx1BusyTO | read-write | current | Time in seconds for which the busy tone will be generated unless interrupted (e.g. by the hangup from the calling party). The value Zero indicates that the ton… |
| 1.3.6.1.4.1.351.110.4.3.5.1.1.1.19 | ColumnvismDsx1ReorderTO | read-write | current | Time in seconds for which the reorder/fast busy tone will be generated unless interrupted (e.g. by the hangup from the calling party). The value zero indicates… |
| 1.3.6.1.4.1.351.110.4.3.5.1.1.1.20 | ColumnvismDsx1DialTO | read-write | current | Time in seconds for which the dial tone will be generated unless interrupted (e.g. by the first DTMF digit from the calling party). The value Zero indicates th… |
| 1.3.6.1.4.1.351.110.4.3.5.1.1.1.21 | ColumnvismDsx1StutterDialTO | read-write | current | Time in seconds for which the stutter dial tone/confirmation dial tone will be generated unless interrupted (e.g. by the first DTMF digit from the calling part… |
| 1.3.6.1.4.1.351.110.4.3.5.1.1.1.22 | ColumnvismDsx1OffHookAlertTO | read-write | current | Time in seconds for which the off-hook alert tone will be generated unless interrupted (e.g. caller hangup). The value Zero indicates that the tone will be gen… |
| 1.3.6.1.4.1.351.110.4.3.5.1.1.1.23 | ColumnvismDsx1RemoteRingback | read-write | current | This object specifies the remote ring back method on endpoints on this DS1/E1. This object can have the following values: 'proxy(1)': This gateway sends the ap… |
| 1.3.6.1.4.1.351.110.4.3.5.1.1.1.24 | ColumnvismDsx1MidcallTpart | read-write | current | This object represents the partial dial timing in seconds and is used along with a digit map as the inter-digit timer. This object is used for both CAS and non… |
| 1.3.6.1.4.1.351.110.4.3.5.1.1.1.25 | ColumnvismDsx1MidcallTcrit | read-write | current | This object represents the critical timing in seconds. If used along with a digit map, the timer is started when the last digit is received i.e when no more di… |
| 1.3.6.1.4.1.351.110.4.3.5.1.1.1.26 | ColumnvismDsx1Sa4Byte | read-write | current | This is a spare bit on T1/E1 Framer reserved for international standardization. |
| 1.3.6.1.4.1.351.110.4.3.5.1.1.1.27 | ColumnvismDsx1Sa5Byte | read-write | current | This is a spare bit on T1/E1 Framer reserved for international standardization. |
| 1.3.6.1.4.1.351.110.4.3.5.1.1.1.28 | ColumnvismDsx1Sa6Byte | read-write | current | This is a spare bit on T1/E1 Framer reserved for international standardization. |
| 1.3.6.1.4.1.351.110.4.3.5.1.1.1.29 | ColumnvismDsx1Sa7Byte | read-write | current | This is a spare bit on T1/E1 Framer reserved for international standardization. |
| 1.3.6.1.4.1.351.110.4.3.5.1.1.1.30 | ColumnvismDsx1Sa8Byte | read-write | current | This is a spare bit on T1/E1 Framer reserved for international standardization. |
| 1.3.6.1.4.1.351.110.4.3.5.1.1.1.31 | ColumnvismDsx1State | read-only | current | This object will allow the line administrative state (in service and out of service) to be persistent. invalid (1) : invalid state. is (2) : in service oos (3)… |
| 1.3.6.1.4.1.351.110.4.3.5.1.1.1.32 | ColumnvismDsx1AdminStateControl | read-write | current | This control object is used to change the service state of the line from 'is' to 'coos' or from 'coos' to 'is'. The resulting service state of the line is repr… |
| 1.3.6.1.4.1.351.110.4.3.5.1.1.1.33 | ColumnvismBearerBusyCode | read-write | current | This object is used when vismTrunkConditionEnable is enabled on a line. It is a configurable busy pattern sent out on the 'Bearer' on the channels, which are r… |
| 1.3.6.1.4.1.351.110.4.3.5.1.1.1.34 | ColumnvismDsx1V110Enable | read-write | current | This object specifies whether V.110 detection on the line is enabled or disabled. If the value of this object is 'true', V.110 detection on the line is enabled… |
| 1.3.6.1.4.1.351.110.4.3.5.1.1.1.35 | ColumnvismDsx1AlarmLogEnable | read-write | current | This object specifies whether detailed alarm logging on the DS1 is enabled or disabled. If this object is true, detailed alarm logging for the DS1 will be enab… |
| 1.3.6.1.4.1.351.110.4.3.5.1.1.1.36 | ColumnvismDsx1AlarmLogAdminTimer | read-write | current | This object specifies the time for which the detailed alarm logging for the DS1 will remain active. The value in this object can be set and is valid only if vi… |
| 1.3.6.1.4.1.351.110.4.3.5.1.1.1.37 | ColumnvismDsx1AlarmLogOperTimer | read-only | current | This object specifies the time remaining in minutes for which the detailed alarm logging will remain active on the DS1. When this value becomes 0, it indicates… |
| 1.3.6.1.4.1.351.110.4.3.5.1.1.1.38 | ColumnvismDsx1ElectricalSignalEnable | read-write | current | This object specifies whether electrical signal on the line is enabled or disabled. If the value of this object is 'true', electrical signal on the line is ena… |
| 1.3.6.1.4.1.351.110.4.3.5.2 | Nodedsx1VismStatsGrp | |||
| 1.3.6.1.4.1.351.110.4.3.5.2.1 | Tabledsx1VismStatsGrpTable | not-accessible | current | The VISM specific DS1/E1 statistics table. This table contains the additional VISM statistics information for DS1/E1. |
| 1.3.6.1.4.1.351.110.4.3.5.2.1.1 | Rowdsx1VismStatsGrpEntry | not-accessible | current | An entry in the VISM Dsx1 Statistics table. This entry augments the corresponding entry in the dsx1VismCnfGrpTable. |
| 1.3.6.1.4.1.351.110.4.3.5.2.1.1.1 | ColumnvismDsx1TotalTxUncontrolledSlips | read-only | current | The number of accumulative uncontrolled slips in the transmit direction. |
| 1.3.6.1.4.1.351.110.4.3.5.2.1.1.2 | ColumnvismDsx1TotalTxFrameSlips | read-only | current | The number of accumulative frame slips in the transmit direction. |
| 1.3.6.1.4.1.351.110.4.3.5.2.1.1.3 | ColumnvismDsx1TotalRxUncontrolledSlips | read-only | current | The number of accumulative uncontrolled slips in the receive direction. |
| 1.3.6.1.4.1.351.110.4.3.5.2.1.1.4 | ColumnvismDsx1TotalRxFrameSlips | read-only | current | The number of accumulative frame slips in the receive direction. |
| 1.3.6.1.4.1.351.110.4.3.5.2.1.1.5 | ColumnvismSlipCntDiscontinuityTime | read-only | current | This object will represent the timestamp since sysUpTime when the statistics in this interval were discontinued. If this has the default value then it indicate… |
| 1.3.6.1.4.1.351.150.79 | IdentityciscoVismDsx1MIB | The MIB module to configure DS1/E1 interface objects in a Voice Interworking Service Module (VISM) module. This MIB is an extension to CISCO-MGX82XX-DSX1-MIB f… | ||
| 1.3.6.1.4.1.351.150.79.2 | NodecvDsx1MIBConformance | |||
| 1.3.6.1.4.1.351.150.79.2.1 | NodecvDsx1MIBGroups | |||
| 1.3.6.1.4.1.351.150.79.2.1.1 | GroupcvDsx1ConfGroup | deprecated | The collection of objects used for DS1/E1 interfaces. | |
| 1.3.6.1.4.1.351.150.79.2.1.2 | GroupcvDsx1AlmHistoryGroup | deprecated | The collection of objects related to DS1/E1 alarm history. | |
| 1.3.6.1.4.1.351.150.79.2.1.3 | GroupcvDsx1ConfGroupRev1 | deprecated | The collection of objects related to DS1/E1 in VISM | |
| 1.3.6.1.4.1.351.150.79.2.1.4 | GroupcvDsx1ConfGroupRev2 | current | The collection of objects related to DS1/E1 in VISM | |
| 1.3.6.1.4.1.351.150.79.2.1.5 | GroupcvDsx1AlmHistoryGroupRev1 | current | The collection of objects related to DS1/E1 alarm history. | |
| 1.3.6.1.4.1.351.150.79.2.1.6 | GroupcvDsx1StatsGroup | current | The collection of objects related to DS1/E1 in VISM | |
| 1.3.6.1.4.1.351.150.79.2.1.7 | GroupcvDsx1ConfGroupSup1 | current | The collection of objects related to DS1/E1 in VISM | |
| 1.3.6.1.4.1.351.150.79.2.1.8 | GroupcvDsx1AlarmLogGroup | current | The collection of objects related to DS1/E1 in VISM. | |
| 1.3.6.1.4.1.351.150.79.2.1.9 | GroupcvDsx1ElecSigGroup | current | The collection of objects related to DS1/E1 electrical signals in VISM. | |
| 1.3.6.1.4.1.351.150.79.2.2 | NodecvDsx1MIBCompliances | |||
| 1.3.6.1.4.1.351.150.79.2.2.1 | CompliancecvDsx1Compliance | deprecated | The compliance statement for objects related to VISM DS1/E1 MIB. | |
| 1.3.6.1.4.1.351.150.79.2.2.2 | CompliancecvDsx1ComplianceRev1 | deprecated | The compliance statement for objects related to VISM DS1/E1 MIB. | |
| 1.3.6.1.4.1.351.150.79.2.2.3 | CompliancecvDsx1ComplianceRev2 | deprecated | The compliance statement for objects related to VISM DS1/E1 MIB. | |
| 1.3.6.1.4.1.351.150.79.2.2.4 | CompliancecvDsx1ComplianceRev3 | deprecated | The compliance statement for objects related to VISM DS1/E1 MIB. | |
| 1.3.6.1.4.1.351.150.79.2.2.5 | CompliancecvDsx1ComplianceRev4 | deprecated | The compliance statement for objects related to VISM DS1/E1 MIB. | |
| 1.3.6.1.4.1.351.150.79.2.2.6 | CompliancecvDsx1ComplianceRev5 | current | The compliance statement for objects related to VISM DS1/E1 MIB. |