CISCO-WAN-CELL-EXT-MIB
88 objects
This MIB module is an extension of CISCO-WAN-3G-MIB.my, and it provides network management support for Cisco cellular WAN 4G/LTE products. *** ABBREVIATIONS, ACRONYMS, AND SYMBOLS *** AMBR - Aggregate Maximum Bit Rate APN - Access Point Name ARP - Allocation and Retention Priority CQI - Channel Quality Indicator eNodeB - Evolved Node B EPS - Evolved Packet System E-UTRAN - Evolved Universal Terrestrial Radio Access GBR - Guaranteed Bit Rate LTE - Long Term Evolution MBR - Maximum Bit Rate PCRF - Policy and Charging Rules Function PDN - Packet Data Network QCI - QoS Class Identifier QOS - Quality of Service RF - Radio Frequency RSRP - Reference Signal Receive Power RSRQ - Reference Signal Receive Quality SINR - Signal-to-Interference plus Noise Ratio SNR - Signal-to-Noise Ratio UE - User Equipment
Imported Objects
| CISCO-SMI | ciscoMgmt |
| CISCO-WAN-3G-MIB | C3gServiceCapability |
| ENTITY-MIB | entPhysicalIndex entPhysicalName |
| IF-MIB | ifIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter64 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus StorageType TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.817 | IdentityciscoWanCellExtMIB | This MIB module is an extension of CISCO-WAN-3G-MIB.my, and it provides network management support for Cisco cellular WAN 4G/LTE products. *** ABBREVIATIONS, A… | ||
| 1.3.6.1.4.1.9.9.817.0 | NodeciscoWanCellExtMIBNotifs | |||
| 1.3.6.1.4.1.9.9.817.0.1 | NotificationcwceLteRsrqOnsetNotif | current | If RSRQ goes below cwceLteRsrqOnsetNotifThreshold and the service bit in cwceLteRsrqOnsetNotifFlag is set, this notification will be generated. Object cwceLteR… | |
| 1.3.6.1.4.1.9.9.817.0.2 | NotificationcwceLteRsrqAbateNotif | current | If RSRQ goes above cwceLteRsrqAbateNotifThreshold and the service bit in cwceLteRsrqOnsetNotifFlag is set, this notification will be generated. Object cwceLteR… | |
| 1.3.6.1.4.1.9.9.817.0.3 | NotificationcwceLteRsrpOnsetNotif | current | If RSRP goes below cwceLteRsrpOnsetNotifThreshold and the service bit in cwceLteRsrpOnsetNotifFlag is set, this notification will be generated. Object cwceLteR… | |
| 1.3.6.1.4.1.9.9.817.0.4 | NotificationcwceLteRsrpAbateNotif | current | If RSRP goes above cwceLteRsrqAbateNotifThreshold and the service bit in cwceLteRsrpOnsetNotifFlag is set, this notification will be generated. Object cwceLteR… | |
| 1.3.6.1.4.1.9.9.817.1 | NodeciscoWanCellExtMIBObjects | |||
| 1.3.6.1.4.1.9.9.817.1.1 | NodeciscoWanCellExtLte | |||
| 1.3.6.1.4.1.9.9.817.1.1.1 | NodecwceLteRadio | |||
| 1.3.6.1.4.1.9.9.817.1.1.1.1 | TablecwceLteRadioTable | not-accessible | current | This table contains entPhysicalTable entries which are capable of providing operational Cellular 4G/LTE Radio signal parameters and administrative notification… |
| 1.3.6.1.4.1.9.9.817.1.1.1.1.1 | RowcwceLteRadioEntry | not-accessible | current | An entry contains management information of Cellular 4G/LTE Radio signal parameters and notification information. An entry of this table is created if an entit… |
| 1.3.6.1.4.1.9.9.817.1.1.1.1.1.1 | ColumncwceLteCurrRsrp | read-only | current | This object indicates the LTE RSRP value reported by the modem. |
| 1.3.6.1.4.1.9.9.817.1.1.1.1.1.2 | ColumncwceLteCurrRsrq | read-only | current | This object indicates the LTE RSRQ value reported by the modem. |
| 1.3.6.1.4.1.9.9.817.1.1.1.1.1.3 | ColumncwceLteCurrSnr | read-only | current | This object indicates the LTE SNR value reported by the modem. |
| 1.3.6.1.4.1.9.9.817.1.1.1.1.1.4 | ColumncwceLteCurrSinr | read-only | current | This object indicates the LTE SINR value measured in decibels (dB) reported by the modem. |
| 1.3.6.1.4.1.9.9.817.1.1.1.1.1.5 | ColumncwceLteCurrCqiIndex | read-only | current | This object indicates he LTE CQI Index reported by the modem. |
| 1.3.6.1.4.1.9.9.817.1.1.1.1.1.6 | ColumncwceLteCurrOperatingBand | read-only | current | This object indicates the E-UTRAN Operating Band reported by the modem. |
| 1.3.6.1.4.1.9.9.817.1.1.1.1.1.7 | ColumncwceLteNotifRsrp | read-only | current | This object indicates the LTE RSRP value reported by the modem which triggered the most recent cwceLteRsrpOnsetNotif or cwceLteRsrpAbateNotif notification. |
| 1.3.6.1.4.1.9.9.817.1.1.1.1.1.8 | ColumncwceLteNotifRsrq | read-only | current | This object indicates the LTE RSRP value reported by the modem which triggered the most recent cwceLteRsrqOnsetNotif or cwceLteRsrqAbateNotif notification. |
| 1.3.6.1.4.1.9.9.817.1.1.1.1.1.9 | ColumncwceLteRsrpOnsetNotifThreshold | read-write | current | This object specifies the RSRP onset threshold value. If the value of cwceLteCurrRsrp goes below the threshold and the service bit in cwceLteRsrpOnsetNotifFlag… |
| 1.3.6.1.4.1.9.9.817.1.1.1.1.1.10 | ColumncwceLteRsrpAbateNotifThreshold | read-write | current | This object specifies the RSRP abate threshold value. If the value of cwceLteCurrRsrp goes above the threshold and the service bit in cwceLteRsrpOnsetNotifFlag… |
| 1.3.6.1.4.1.9.9.817.1.1.1.1.1.11 | ColumncwceLteRsrqOnsetNotifThreshold | read-write | current | This object specifies the RSRQ onset threshold value. If the value of cwceLteCurrRsrq goes below the threshold and the service bit in cwceLteRsrqOnsetNotifFlag… |
| 1.3.6.1.4.1.9.9.817.1.1.1.1.1.12 | ColumncwceLteRsrqAbateNotifThreshold | read-write | current | This object specifies the RSRQ abate threshold value. If the value of cwceLteCurrRsrq goes above the threshold and the service bit in cwceLteRsrqOnsetNotifFlag… |
| 1.3.6.1.4.1.9.9.817.1.1.1.1.1.13 | ColumncwceLteRsrpOnsetNotifFlag | read-write | current | This object specifies the flag bitmap to control the generation of notification cwceLteRsrpOnsetNotif. Each bit represents a service as defined in C3gServiceCa… |
| 1.3.6.1.4.1.9.9.817.1.1.1.1.1.14 | ColumncwceLteRsrpAbateNotifFlag | read-write | current | This object specifies the flag bitmap to control the generation of notification cwceLteRsrpAbateNotif. Each bit represents a service as defined in C3gServiceCa… |
| 1.3.6.1.4.1.9.9.817.1.1.1.1.1.15 | ColumncwceLteRsrqOnsetNotifFlag | read-write | current | This object specifies the flag bitmap to control the generation of notification cwceLteRsrqOnsetNotif. Each bit represents a service as defined in C3gServiceCa… |
| 1.3.6.1.4.1.9.9.817.1.1.1.1.1.16 | ColumncwceLteRsrqAbateNotifFlag | read-write | current | This object specifies the flag bitmap to control the generation of notification cwceLteRsrqAbateNotif. Each bit represents a service as defined in C3gServiceCa… |
| 1.3.6.1.4.1.9.9.817.1.1.1.2 | NodecwceLteRadioHistory | |||
| 1.3.6.1.4.1.9.9.817.1.1.1.2.1 | TablecwceLteRadioHistoryRsrpTable | not-accessible | current | This table contains Cellular 4G/LTE RSRP history. The history of RSRP are carried in an octet of string. Each octet in the octet string has a value from 40 to … |
| 1.3.6.1.4.1.9.9.817.1.1.1.2.1.1 | RowcwceLteRadioHistoryRsrpEntry | not-accessible | current | An entry contains management information of Cellular 4G/LTE RSRP Radio history parameters. An entry of this table is created if an entity capable of providing … |
| 1.3.6.1.4.1.9.9.817.1.1.1.2.1.1.1 | ColumncwceLteRadioHistoryRsrpPerSecond | read-only | current | This object indicates per-second RSRP history. It contains a per-second history of RSRP values for the last 60 seconds. |
| 1.3.6.1.4.1.9.9.817.1.1.1.2.1.1.2 | ColumncwceLteRadioHistoryRsrpPerMinute | read-only | current | This object indicates per-minute weakest RSRP value history. It contains a per-minute history of weakest RSRP values for the last 60 minutes. The octet in the … |
| 1.3.6.1.4.1.9.9.817.1.1.1.2.1.1.3 | ColumncwceLteRadioHistoryRsrpPerHour | read-only | current | This object indicates per-hour weakest RSRP value history. It contains a per-hour history of weakest RSRP values for the last 72 hours. The octet in the string… |
| 1.3.6.1.4.1.9.9.817.1.1.1.2.2 | TablecwceLteRadioHistoryRsrqTable | not-accessible | current | This table contains Cellular 4G/LTE RSRQ history. The history of RSRQ are carried in an octet of string. Each octet in the octet string has a value from 3 to 2… |
| 1.3.6.1.4.1.9.9.817.1.1.1.2.2.1 | RowcwceLteRadioHistoryRsrqEntry | not-accessible | current | An entry contains management information of Cellular 4G/LTE RSRQ Radio history parameters. An entry of this table is created if an entity capable of providing … |
| 1.3.6.1.4.1.9.9.817.1.1.1.2.2.1.1 | ColumncwceLteRadioHistoryRsrqPerSecond | read-only | current | This object indicates per-second RSRQ history. It contains a per-second history of RSRQ values for the last 60 seconds. |
| 1.3.6.1.4.1.9.9.817.1.1.1.2.2.1.2 | ColumncwceLteRadioHistoryRsrqPerMinute | read-only | current | This object indicates per-minute weakest RSRQ value history. It contains a per-minute history of weakest RSRQ values for the last 60 minutes. The octet in the … |
| 1.3.6.1.4.1.9.9.817.1.1.1.2.2.1.3 | ColumncwceLteRadioHistoryRsrqPerHour | read-only | current | This object indicates per-hour weakest RSRQ value history. It contains a per-hour history of weakest RSRQ values for the last 72 hours. The octet in the string… |
| 1.3.6.1.4.1.9.9.817.1.1.2 | NodecwceLteProfile | |||
| 1.3.6.1.4.1.9.9.817.1.1.2.1 | ScalarcwceLteIpv4AddrType | read-only | current | The object indicates the type of Internet address for IPv4 addresses used by profiles and PDNs. The valid value for this object is ipv4(1). |
| 1.3.6.1.4.1.9.9.817.1.1.2.2 | ScalarcwceLteIpv6AddrType | read-only | current | The object indicates the type of Internet address for IPv6 addresses used by profiles and PDNs. The valid value for this object is ipv6(2). |
| 1.3.6.1.4.1.9.9.817.1.1.2.3 | TablecwceLteProfileTable | not-accessible | current | This table contains Cellular LTE PDN profiles. Cellular device contains multiple profile entries which can be used to establish cellular data connections (PDN … |
| 1.3.6.1.4.1.9.9.817.1.1.2.3.1 | RowcwceLteProfileEntry | not-accessible | current | An entry contains management information of Cellular 4G/LTE profile parameters. Entries in this table can be created or deleted using cwceLteProfileRowStatus o… |
| 1.3.6.1.4.1.9.9.817.1.1.2.3.1.1 | ColumncwceLteProfileIndex | not-accessible | current | This object specifies profile index, combined with entPhysicalIndex to access profile table. |
| 1.3.6.1.4.1.9.9.817.1.1.2.3.1.2 | ColumncwceLteProfileType | read-create | current | This object specifies the configured EPS Bearer type. |
| 1.3.6.1.4.1.9.9.817.1.1.2.3.1.3 | ColumncwceLteProfileIPv4Addr | read-create | current | This object specifies the configured EPS Bearer IPv4 address. The type of this address is determined by the value of the cwceLteIpv4AddrType object. This objec… |
| 1.3.6.1.4.1.9.9.817.1.1.2.3.1.4 | ColumncwceLteProfileIPv6Addr | read-create | current | This object specifies the configured EPS Bearer IPv6 address. The type of this address is determined by the value of the cwceLteIpv6AddrType object. This objec… |
| 1.3.6.1.4.1.9.9.817.1.1.2.3.1.5 | ColumncwceLteProfileApn | read-create | current | This object specifies configured profile of Access Point Name (APN). The value of this object should be provided by the APN service provider. |
| 1.3.6.1.4.1.9.9.817.1.1.2.3.1.6 | ColumncwceLteProfileApnAmbr | read-create | current | This object specifies the profile APN-AMBR. APN-AMBR is aggregate bit rate across all Non-GBR bearers and across all PDN connections of the same APN. The value… |
| 1.3.6.1.4.1.9.9.817.1.1.2.3.1.7 | ColumncwceLteProfileStorage | read-create | current | This object specifies the storage type for this conceptual row. |
| 1.3.6.1.4.1.9.9.817.1.1.2.3.1.8 | ColumncwceLteProfileRowStatus | read-create | current | This object specifies the status of the conceptual row. It's used to manage creation, modification and deletion of rows in this table. When a row is active, us… |
| 1.3.6.1.4.1.9.9.817.1.1.2.4 | TablecwceLtePdnTable | not-accessible | current | This table contains Cellular 4G/LTE Packet Data Network(PDN) information of all the PDN capable interfaces in the system. |
| 1.3.6.1.4.1.9.9.817.1.1.2.4.1 | RowcwceLtePdnEntry | not-accessible | current | An entry contains management information of Cellular 4G/LTE PDN parameters. An entry of this table is created if an interface capable of providing operational … |
| 1.3.6.1.4.1.9.9.817.1.1.2.4.1.2 | ColumncwceLtePdnProfileUsed | read-only | current | This object indicates the cwceLteProfileIndex of the profile used by current EPS bearer to establish data connection. |
| 1.3.6.1.4.1.9.9.817.1.1.2.4.1.3 | ColumncwceLtePdnConnStatus | read-only | current | This object indicates PDN session status of the profile. This is active when the call is established and PDN context has become active. |
| 1.3.6.1.4.1.9.9.817.1.1.2.4.1.4 | ColumncwceLtePdnType | read-only | current | This object indicates current session PDN type. |
| 1.3.6.1.4.1.9.9.817.1.1.2.4.1.5 | ColumncwceLtePdnIpv4Addr | read-only | current | This object indicates current session EPS Bearer IPv4 address. The type of this address is determined by the value of the cwceLteIpv4AddrType object. |
| 1.3.6.1.4.1.9.9.817.1.1.2.4.1.6 | ColumncwceLtePdnIpv6Addr | read-only | current | This object indicates current session EPS Bearer IPv6 address. The type of this address is determined by the value of the cwceLteIpv6AddrType object. |
| 1.3.6.1.4.1.9.9.817.1.1.2.4.1.7 | ColumncwceLtePdnPriDnsIpv4Addr | read-only | current | This object indicates current session EPS Bearer Primary DNS IPv4 address. The type of this address is determined by the value of the cwceLteIpv4AddrType objec… |
| 1.3.6.1.4.1.9.9.817.1.1.2.4.1.8 | ColumncwceLtePdnSecDnsIpv4Addr | read-only | current | This object indicates current session EPS Bearer Secondary DNS IPv4 address. The type of this address is determined by the value of the cwceLteIpv4AddrType obj… |
| 1.3.6.1.4.1.9.9.817.1.1.2.4.1.9 | ColumncwceLtePdnPriDnsIpv6Addr | read-only | current | This object indicates current session EPS Bearer Primary DNS IPv6 address. The type of this address is determined by the value of the cwceLteIpv6AddrType objec… |
| 1.3.6.1.4.1.9.9.817.1.1.2.4.1.10 | ColumncwceLtePdnSecDnsIpv6Addr | read-only | current | This object indicates current session EPS Bearer Secondary DNS IPv6 address. The type of this address is determined by the value of the cwceLteIpv6AddrType obj… |
| 1.3.6.1.4.1.9.9.817.1.1.2.5 | TablecwceLteEpsBearerQosTable | not-accessible | current | This table contains 4G/LTE QoS parameters requested by modem to the cellular network via PDN Context Activation Request message. |
| 1.3.6.1.4.1.9.9.817.1.1.2.5.1 | RowcwceLteEpsBearerQosEntry | not-accessible | current | An entry contains management information of Cellular 4G/LTE QoS parameters. An entry of this table is created if an interface capable of providing operational … |
| 1.3.6.1.4.1.9.9.817.1.1.2.5.1.1 | ColumncwceLteEpsBearerId | not-accessible | current | This object indicates the EPS Bearer Identity which is allocated by the Mobility Management Entity (MME). |
| 1.3.6.1.4.1.9.9.817.1.1.2.5.1.2 | ColumncwceLteEpsBearerType | read-only | current | This object indicates the type of bearers. gbr - Guaranteed Bit Rate(GBR). GBR bearer has a minimum amount of bandwidth that is reserved by the network, and th… |
| 1.3.6.1.4.1.9.9.817.1.1.2.5.1.3 | ColumncwceLteEpsQCI | read-only | current | This object indicates the QoS Class Identifier(QCI). The QCI along with the ARP characterizes the QoS of the bearer. |
| 1.3.6.1.4.1.9.9.817.1.1.2.5.1.4 | ColumncwceLteEpsArp | read-only | current | This object indicates the Allocation and Retention Priority(ARP). ARP is a QoS parameter designed to facilitate decisions as to whether a bearer establishment/… |
| 1.3.6.1.4.1.9.9.817.1.1.2.5.1.5 | ColumncwceLteEpsBearerResType | read-only | current | This object indicates the Bearer resource type. |
| 1.3.6.1.4.1.9.9.817.1.1.2.5.1.6 | ColumncwceLteEpsGbr | read-only | current | This object indicates the Guaranteed Bit Rate(GBR) which determines the resource reservation to guarantee a given data rate. |
| 1.3.6.1.4.1.9.9.817.1.1.2.5.1.7 | ColumncwceLteEpsMbr | read-only | current | This object indicates the Maximum Bit Rate(MBR) which is used for policing the user traffic. |
| 1.3.6.1.4.1.9.9.817.1.1.2.5.1.8 | ColumncwceLteEpsAmbr | read-only | current | This object indicates the Aggregated Maximum Bit Rate. This object is valid only if the value of the corresponding cwceLteEpsBearerResType is 'defaultBearer'. |
| 1.3.6.1.4.1.9.9.817.1.1.2.5.1.9 | ColumncwceLteEpsTotalBytesTx | read-only | current | This object indicates the total data bytes transmitted by this bearer. |
| 1.3.6.1.4.1.9.9.817.1.1.2.5.1.10 | ColumncwceLteEpsTotalBytesRx | read-only | current | This object indicates the total data bytes received by this bearer. |
| 1.3.6.1.4.1.9.9.817.1.1.2.5.1.11 | ColumncwceLteEpsPacketsTx | read-only | current | This object indicates the number of packets transmitted by this bearer. |
| 1.3.6.1.4.1.9.9.817.1.1.2.5.1.12 | ColumncwceLteEpsPacketsRx | read-only | current | This object indicates the number of packets received by this bearer. |
| 1.3.6.1.4.1.9.9.817.2 | NodeciscoWanCellExtMIBConform | |||
| 1.3.6.1.4.1.9.9.817.2.1 | NodeciscoWanCellExtMIBCompliances | |||
| 1.3.6.1.4.1.9.9.817.2.1.1 | ComplianceciscoWanCellExtMIBCompliance | read-only | current | The compliance statement for the CISCO-WAN-CELL-EXT-MIB. |
| 1.3.6.1.4.1.9.9.817.2.2 | NodeciscoWanCellExtMIBGroups | |||
| 1.3.6.1.4.1.9.9.817.2.2.1 | GroupciscoWanCellExtMIBLteObjectGroup | current | A collection of objects for Cellular 4G/LTE. | |
| 1.3.6.1.4.1.9.9.817.2.2.2 | GroupciscoWanCellExtMIBNotificationGroup | current | A collection of objects for Cellular WAN notifications. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CiscoWanCellExtCqiIndex | Unsigned32 | current | Channel Quality indicator reported to eNodeB which directly translates to Modulation Coding Scheme selected. |
| CiscoWanCellExtProtocolType | INTEGER { unknown(1), ipv4(2), ppp(3), ipv6(4), ipv4V6(5) } | current | Generic PDN type. |
| CiscoWanCellExtRsrp | Integer32 | current | Reference signal received power (RSRP) is defined as the linear average over the power contributions and measured in dBm. The reporting range of RSRP is defined per LTE standard with 1 dBm resolution. |
| CiscoWanCellExtRsrq | Integer32 | current | Reference Signal Received Quality (RSRQ) is defined as the ratio NxRSRP over (E-UTRAN carrier RSSI) and measured in dB. The reporting range of RSRQ is defined per LTE standard with 0.5 dB resolution. |
| CiscoWanCellExtSINR | Integer32 | current | Signal to Interference plus Noise Ratio is the power at the receiver due to the required signal, divided by the power due to noise and interference measured in dB. It is used as a measure of signal quality. |
| CiscoWanCellExtSNR | Integer32 | current | Signal-to-Noise power Ratio (SNR) is defined as the ratio of signal power to the noise power, measured in dB. It determines the downlink throughput for the UE. |