CISCO-WAN-CES-RSRC-PART-MIB
18 objects
The mib module to configure the resource partition on Circuit Emulation Service(CES) ports. This is applicable for service modules providing the Circuit Emulation Services.
Imported Objects
| CISCO-WAN-CES-PORT-MIB | cesmPort |
| CISCOWAN-SMI | ciscoWan |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.351.110.5.3.1.2 | NodecesmPortCnfResPartGrp | |||
| 1.3.6.1.4.1.351.110.5.3.1.2.1 | TablecesmPortCnfResPartGrpTable | not-accessible | current | This table is for configuring the resource partition parameters. |
| 1.3.6.1.4.1.351.110.5.3.1.2.1.1 | RowcesmPortCnfResPartGrpEntry | not-accessible | current | An entry for a resource partition. A resource partition have to be created before connections can be added to the logical ports. |
| 1.3.6.1.4.1.351.110.5.3.1.2.1.1.1 | ColumncesmResPartPortNum | read-only | current | The value of this object identifies the CES port. The value of this object must be same as the value of 'cesPortNum' from cesmPortCnfGrpTable. |
| 1.3.6.1.4.1.351.110.5.3.1.2.1.1.2 | ColumncesmResPartCtrlrNum | read-only | current | This object identifies the controller which can be used for accessing the resources. The possible values are : par(1) : Portable Auto Route controller. : This … |
| 1.3.6.1.4.1.351.110.5.3.1.2.1.1.3 | ColumncesmResPartRowStatus | read-write | current | This object is used for adding/deleting/modifying resource partition on a CES port. In MGX Release 1.x: To add an entry, this object should be set to add(1), v… |
| 1.3.6.1.4.1.351.110.5.3.1.2.1.1.4 | ColumncesmResPartNumOfLcnAvail | read-write | current | This represents number of LCNs available for this controller and this port. In CESM-T3/E3 and 8-T1/E1,this value is 1. |
| 1.3.6.1.4.1.351.110.5.3.1.2.1.1.5 | ColumncesmResPartLcnLow | read-write | current | This represents low end of reserved LCN In CESM-8T1/E1 and T3/E3, this refers to the logical port. |
| 1.3.6.1.4.1.351.110.5.3.1.2.1.1.6 | ColumncesmResPartLcnHigh | read-write | current | This represents high end of reserved LCN In CESM-8T1/E1 and T3/E3, this refers to the logical port. |
| 1.3.6.1.4.1.351.110.5.3.1.2.1.1.7 | ColumncesmResPartIngrPctBW | read-write | current | The percentage of total ingress bandwidth reserved. In CESM-8T1/E1 and T3/E3, as there is only one LCN per port and it could be used by only one controller,thi… |
| 1.3.6.1.4.1.351.110.5.3.1.2.1.1.8 | ColumncesmResPartEgrPctBW | read-write | current | The percentage of total egress bandwidth reserved In CESM-8T1/E1 and T3/E3, as there is only one LCN per port and it could be used by only one controller,this … |
| 1.3.6.1.4.1.351.110.5.3.1.2.1.1.9 | ColumncesmResPartCtrlrID | read-write | current | This is the controller identifier for the resource patition. The default value is set for PNNI controller. |
| 1.3.6.1.4.1.351.150.41 | IdentityciscoWanCesRsrcPartMIB | The mib module to configure the resource partition on Circuit Emulation Service(CES) ports. This is applicable for service modules providing the Circuit Emulat… | ||
| 1.3.6.1.4.1.351.150.41.2 | NodecwcRsrcPartMIBConformance | |||
| 1.3.6.1.4.1.351.150.41.2.1 | NodecwcRsrcPartMIBCompliances | |||
| 1.3.6.1.4.1.351.150.41.2.1.1 | ComplianceciscoWanCesRsrcPartCompliance | current | The compliance statement for entities which implement the Broad band Interface Resource Partition MIB. | |
| 1.3.6.1.4.1.351.150.41.2.2 | NodecwcRsrcPartMIBGroups | |||
| 1.3.6.1.4.1.351.150.41.2.2.1 | GroupciscoWanCesRsrcPartGroup | current | A collection of objects providing the resource partition configuration on CES ports. |