CM-IP-MIB
195 objects
This module defines the IP MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA Optical Networking.
Imported Objects
| ADVA-MIB | fsp150cm |
| CM-COMMON-MIB | IpVersion VlanId |
| IPV6-TC | Ipv6Address |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress RowStatus StorageType TEXTUAL-CONVENTION TruthValue VariablePointer |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2544.1.12.11 | IdentitycmIPMIB | This module defines the IP MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA Optical Networking. | ||
| 1.3.6.1.4.1.2544.1.12.11.1 | NodecmIpObjects | |||
| 1.3.6.1.4.1.2544.1.12.11.1.1 | TablecmIpInterfaceTable | not-accessible | current | User managed IP Address Table. |
| 1.3.6.1.4.1.2544.1.12.11.1.1.1 | RowcmIpInterfaceEntry | not-accessible | current | Allows management of IP Interfaces. |
| 1.3.6.1.4.1.2544.1.12.11.1.1.1.1 | ColumncmIpInterfaceName | read-only | current | Name of the IP interface. |
| 1.3.6.1.4.1.2544.1.12.11.1.1.1.2 | ColumncmIpInterface | read-write | current | IP Address of the interface. |
| 1.3.6.1.4.1.2544.1.12.11.1.1.1.3 | ColumncmIpInterfaceMask | read-write | current | IP Mask of the interface. |
| 1.3.6.1.4.1.2544.1.12.11.1.1.1.4 | ColumncmIpInterfaceDhcpEnabled | read-write | current | Whether or not DHCP is enabled on this interface. |
| 1.3.6.1.4.1.2544.1.12.11.1.1.1.5 | ColumncmIpInterfaceMTU | read-only | current | IP Interface MTU. |
| 1.3.6.1.4.1.2544.1.12.11.1.1.1.6 | ColumncmIpInterfaceDhcpRole | read-write | current | Specify the DHCP role on this interface. |
| 1.3.6.1.4.1.2544.1.12.11.1.1.1.7 | ColumncmIpInterfacePhysicalAddress | read-only | current | Physical Address associated with the IP Address. |
| 1.3.6.1.4.1.2544.1.12.11.1.1.1.8 | ColumncmIpInterfaceRIPv2Enabled | read-write | current | This object allows to enable/disable RIPv2 on the IP Interface. |
| 1.3.6.1.4.1.2544.1.12.11.1.1.1.9 | ColumncmIpInterfaceDHCPClientIdEnabled | read-write | current | This object enables DHCP Option 61 on the IP interface. This object is only applicable when DHCP client is enabled. |
| 1.3.6.1.4.1.2544.1.12.11.1.1.1.10 | ColumncmIpInterfaceDHCPClientId | read-write | current | This object is applicable when cmIpInterfaceDHCPClientIdEnabled is set to TRUE. It allows users to specify the DHCP Client Id as a DisplayString - instead of t… |
| 1.3.6.1.4.1.2544.1.12.11.1.1.1.11 | ColumncmIpInterfaceIpMode | read-write | current | This object is the ipmode for the interface. |
| 1.3.6.1.4.1.2544.1.12.11.1.1.1.12 | ColumncmIpInterfaceDhcpClassIdEnabled | read-write | current | This object describe whether class id editable enabled. |
| 1.3.6.1.4.1.2544.1.12.11.1.1.1.13 | ColumncmIpInterfaceDhcpHostNameEnabled | read-write | current | This object describe whether host name editable enabled. |
| 1.3.6.1.4.1.2544.1.12.11.1.1.1.14 | ColumncmIpInterfaceDhcpHostName | read-write | current | This object describe the host name. |
| 1.3.6.1.4.1.2544.1.12.11.1.1.1.15 | ColumncmIpInterfaceDhcpLogServerEnabled | read-write | current | This object describe whether the dhcp log server enabled. |
| 1.3.6.1.4.1.2544.1.12.11.1.1.1.16 | ColumncmIpInterfaceDhcpNTPServerEnabled | read-write | current | This object describe whether the dhcp ntp server enabled. |
| 1.3.6.1.4.1.2544.1.12.11.1.1.1.17 | ColumncmIpInterfaceDhcpClientIdType | read-write | current | This object describe whether the dhcp cid type. |
| 1.3.6.1.4.1.2544.1.12.11.1.1.1.18 | ColumncmIpInterfaceDhcpHostNameType | read-write | current | This object describe whether the dhcp host name type. |
| 1.3.6.1.4.1.2544.1.12.11.1.1.1.19 | ColumncmIpInterfaceDhcpVendorInfoEnabled | read-write | current | This object means the vendor information whether enabled. |
| 1.3.6.1.4.1.2544.1.12.11.1.1.1.20 | ColumncmIpInterfaceDhcpVendorInfoType | read-write | current | This object describe whether the dhcp vendor information type. |
| 1.3.6.1.4.1.2544.1.12.11.1.1.1.21 | ColumncmIpInterfaceDhcpVendorInfo | read-write | current | This object describe the vendor information. |
| 1.3.6.1.4.1.2544.1.12.11.1.2 | TablecmStaticRouteTable | not-accessible | current | This entity's user configured Static IP Routing table. |
| 1.3.6.1.4.1.2544.1.12.11.1.2.1 | RowcmStaticRouteEntry | not-accessible | current | A particular route to a particular destina- tion, under a particular policy. |
| 1.3.6.1.4.1.2544.1.12.11.1.2.1.1 | ColumncmStaticRouteDest | read-only | current | The destination IP address of this route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance o… |
| 1.3.6.1.4.1.2544.1.12.11.1.2.1.2 | ColumncmStaticRouteMask | read-only | current | Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the cmStaticRouteDest field. For those systems that do… |
| 1.3.6.1.4.1.2544.1.12.11.1.2.1.3 | ColumncmStaticRouteNextHop | read-only | current | On remote routes, the address of the next sys- tem en route; Otherwise, 0.0.0.0. |
| 1.3.6.1.4.1.2544.1.12.11.1.2.1.4 | ColumncmStaticRouteMetric | read-create | current | The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's cmStaticRouteProto valu… |
| 1.3.6.1.4.1.2544.1.12.11.1.2.1.5 | ColumncmStaticRouteRowStatus | read-create | current | The row status variable, used according to row installation and removal conventions. |
| 1.3.6.1.4.1.2544.1.12.11.1.2.1.6 | ColumncmStaticRouteInterface | read-create | current | Name of the IP interface for the interface static route. |
| 1.3.6.1.4.1.2544.1.12.11.1.2.1.7 | ColumncmStaticRouteAdvertise | read-create | current | Whether this static route will be advertised via routing protocol. |
| 1.3.6.1.4.1.2544.1.12.11.1.3 | TablecmARPTable | not-accessible | current | A list of ARP entries on the NIDs. |
| 1.3.6.1.4.1.2544.1.12.11.1.3.1 | RowcmARPEntry | not-accessible | current | A conceptual row in the cmARPTable. Entries can be created/deleted in this table by management application action. |
| 1.3.6.1.4.1.2544.1.12.11.1.3.1.1 | ColumncmARPIndex | read-create | deprecated | An integer index value used to uniquely identify this ARP Entry in the cmARPTable. |
| 1.3.6.1.4.1.2544.1.12.11.1.3.1.2 | ColumncmARPIPAddress | read-create | current | This object allows configuration of the ARP Entry IP Address. |
| 1.3.6.1.4.1.2544.1.12.11.1.3.1.3 | ColumncmARPMacAddress | read-create | current | This object allows management of the ARP Entry MAC Address. |
| 1.3.6.1.4.1.2544.1.12.11.1.3.1.4 | ColumncmARPInterface | read-create | current | This object allows management of the ARP Entry Interface. |
| 1.3.6.1.4.1.2544.1.12.11.1.3.1.5 | ColumncmARPStorageType | read-create | current | The type of storage configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.11.1.3.1.6 | ColumncmARPRowStatus | read-write | current | The status of this row. The cmARPRowStatus object may be modified if the associated instance of this object is equal to active(1), notInService(2), or notReady… |
| 1.3.6.1.4.1.2544.1.12.11.1.3.1.7 | ColumncmARPEntryType | read-write | current | The type of ARP Entry. Note that static entries can be created. |
| 1.3.6.1.4.1.2544.1.12.11.1.4 | TablecmProxyARPTable | not-accessible | current | A list of Proxy ARP entries on the NIDs. This table is not supported in GE206 Release 4.1CC. |
| 1.3.6.1.4.1.2544.1.12.11.1.4.1 | RowcmProxyARPEntry | not-accessible | current | A conceptual row in the cmProxyARPTable. Entries can be created/deleted in this table by management application action. |
| 1.3.6.1.4.1.2544.1.12.11.1.4.1.1 | ColumncmProxyARPIndex | read-create | deprecated | An integer index value used to uniquely identify this Proxy ARP Entry in the cmProxyARPTable. |
| 1.3.6.1.4.1.2544.1.12.11.1.4.1.2 | ColumncmProxyARPIPAddress | read-create | current | This object allows configuration of the ProxyARP Entry IP Address. |
| 1.3.6.1.4.1.2544.1.12.11.1.4.1.3 | ColumncmProxyARPSubnetMask | read-create | current | This object allows management of the Proxy ARP Entry Subnet Mask. |
| 1.3.6.1.4.1.2544.1.12.11.1.4.1.4 | ColumncmProxyARPInterface | read-create | current | This object allows management of the Proxy ARP Entry Interface. |
| 1.3.6.1.4.1.2544.1.12.11.1.4.1.5 | ColumncmProxyARPStorageType | read-create | current | The type of storage configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.11.1.4.1.6 | ColumncmProxyARPRowStatus | read-write | current | The status of this row. The cmProxyARPRowStatus object may be modified if the associated instance of this object is equal to active(1), notInService(2), or not… |
| 1.3.6.1.4.1.2544.1.12.11.1.5 | TableipManagementTunnelTable | not-accessible | current | A list of IP Management Tunnel entries on the fsp150 family of products. |
| 1.3.6.1.4.1.2544.1.12.11.1.5.1 | RowipManagementTunnelEntry | not-accessible | current | A conceptual row in the ipManagementTunnelTable. Entries can be created/deleted in this table by management application action. |
| 1.3.6.1.4.1.2544.1.12.11.1.5.1.1 | ColumnipManagementTunnelIndex | read-create | current | A unique integer index value used to uniquely identify a Management Tunnel Entry in the ipManagementTunnelTable. |
| 1.3.6.1.4.1.2544.1.12.11.1.5.1.2 | ColumnipManagementTunnelAssociatedPort | read-create | current | This allows specification of the associated physical port on the device, to which the Management Tunnel is attached. |
| 1.3.6.1.4.1.2544.1.12.11.1.5.1.3 | ColumnipManagementTunnelName | read-create | current | This allows specification of a unique name which is also used as the name of the IP interface, to which the Management Tunnel is attached. |
| 1.3.6.1.4.1.2544.1.12.11.1.5.1.4 | ColumnipManagementTunnelType | read-create | current | This allows specification of the type of management tunnel, whether it is a VLAN based tunnel or a MAC based tunnel. |
| 1.3.6.1.4.1.2544.1.12.11.1.5.1.5 | ColumnipManagementTunnelMTU | read-only | current | This provides the MTU of the Management Tunnel. |
| 1.3.6.1.4.1.2544.1.12.11.1.5.1.6 | ColumnipManagementTunnelEncapsulationType | read-create | current | This allows specification of the encapsulation type of management tunnel. Only Ethernet encapsulation is currently supported. |
| 1.3.6.1.4.1.2544.1.12.11.1.5.1.7 | ColumnipManagementTunnelIpAddress | read-create | current | This object allows configuration of the Management Tunnel IP Address. |
| 1.3.6.1.4.1.2544.1.12.11.1.5.1.8 | ColumnipManagementTunnelSubnetMask | read-create | current | This object allows management of the Management Tunnel Subnet Mask. |
| 1.3.6.1.4.1.2544.1.12.11.1.5.1.9 | ColumnipManagementTunnelVlanId | read-create | current | This object allows specification of the VLAN Id in the case of a VLAN management tunnel. This object is not relevant for a MAC based management tunnel. |
| 1.3.6.1.4.1.2544.1.12.11.1.5.1.10 | ColumnipManagementTunnelSVlanEnabled | read-create | current | This object allows specification of whether or not the S-TAG is enabled on the IP Management Tunnel. This object is not relevant for a MAC based management tun… |
| 1.3.6.1.4.1.2544.1.12.11.1.5.1.11 | ColumnipManagementTunnelSVlanId | read-create | current | This object allows specification of the S-TAG VLAN Id in the case of a VLAN management tunnel, when S-TAG is also enabled. This object is not relevant for a MA… |
| 1.3.6.1.4.1.2544.1.12.11.1.5.1.12 | ColumnipManagementTunnelDhcpEnabled | read-create | current | This object allows specification of whether or not DHCP is enabled on the IP Management Tunnel. |
| 1.3.6.1.4.1.2544.1.12.11.1.5.1.13 | ColumnipManagementTunnelRip2PktsEnabled | read-create | current | This object allows specification of whether or not RIP2 is enabled on the IP Management Tunnel. |
| 1.3.6.1.4.1.2544.1.12.11.1.5.1.14 | ColumnipManagementTunnelPhysicalAddress | read-only | current | This object provides the physical address (MAC Address) associated with the IP Management Tunnel. |
| 1.3.6.1.4.1.2544.1.12.11.1.5.1.15 | ColumnipManagementTunnelCOS | read-create | current | This object allows specification of the Class of Service associated with the IP Management Tunnel. This value is also used in the p-bits of the VLAN based mana… |
| 1.3.6.1.4.1.2544.1.12.11.1.5.1.16 | ColumnipManagementTunnelCIR | read-create | current | This object allows specification of the Management Tunnel CIR. |
| 1.3.6.1.4.1.2544.1.12.11.1.5.1.17 | ColumnipManagementTunnelEIR | read-create | current | This object allows specification of the Management Tunnel EIR. |
| 1.3.6.1.4.1.2544.1.12.11.1.5.1.18 | ColumnipManagementTunnelBufferSize | read-create | current | This object allows specification of the Management Tunnel Buffer Size. |
| 1.3.6.1.4.1.2544.1.12.11.1.5.1.19 | ColumnipManagementTunnelStorageType | read-create | current | The type of storage configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.11.1.5.1.20 | ColumnipManagementTunnelRowStatus | read-write | current | The status of this row. The ipManagementTunnelRowStatus object may be modified if the associated instance of this object is equal to active(1), notInService(2)… |
| 1.3.6.1.4.1.2544.1.12.11.1.5.1.21 | ColumnipManagementTunnelDHCPClientIdEnabled | read-write | current | This object enables DHCP Option 61 on the Management Tunnel. This object is only applicable when DHCP client is enabled. |
| 1.3.6.1.4.1.2544.1.12.11.1.5.1.22 | ColumnipManagementTunnelDHCPClientId | read-write | current | This object is applicable when ipManagementTunnelDHCPClientIdEnabled is set to TRUE. It allows users to specify the DHCP Client Id as a DisplayString - instead… |
| 1.3.6.1.4.1.2544.1.12.11.1.5.1.23 | ColumnipManagementTunnelQosQueueProfile | read-write | current | This object identifies the OID of cmQosQueueProfileIndex in the cmQosQueueProfileTable. |
| 1.3.6.1.4.1.2544.1.12.11.1.5.1.24 | ColumnipManagementTunnelCVlanEnabled | read-write | current | This object CTAG whether enabled, By default it is enabled. |
| 1.3.6.1.4.1.2544.1.12.11.1.5.1.25 | ColumnipManagementTunnelDHCPv6Enabled | read-write | current | This object DHCPv6 whether enabled, By default it is enabled. |
| 1.3.6.1.4.1.2544.1.12.11.1.5.1.26 | ColumnipManagementTunnelIpv6Address | read-write | current | This object means the unicast ipv6 address. |
| 1.3.6.1.4.1.2544.1.12.11.1.5.1.27 | ColumnipManagementTunnelIpv6AddrPrefixLen | read-write | current | This object means the unicast ipv6 address prefix length. |
| 1.3.6.1.4.1.2544.1.12.11.1.5.1.28 | ColumnipManagementTunnelIpv6StateAddrAutoConfigEnabled | read-write | current | This object Ipv6StateAddrAutoConfig whether enabled, By default it is enabled. |
| 1.3.6.1.4.1.2544.1.12.11.1.5.1.29 | ColumnipManagementTunnellinkLocIpv6Addr | read-only | current | This object means the link local ipv6 address. |
| 1.3.6.1.4.1.2544.1.12.11.1.5.1.30 | ColumnipManagementTunnellinkLocIpv6AddrPrefixLen | read-only | current | This object means the link local ipv6 address prefix length. |
| 1.3.6.1.4.1.2544.1.12.11.1.5.1.31 | ColumnipManagementTunnelIpv6PrefixAdvertiseEnabled | read-write | current | This object means the prefix advertise whether enabled. |
| 1.3.6.1.4.1.2544.1.12.11.1.5.1.32 | ColumnipManagementTunnelIpv6Prefix | read-write | current | This object means the prefix ipv6 address. |
| 1.3.6.1.4.1.2544.1.12.11.1.5.1.33 | ColumnipManagementTunnelIpv6PrefixLen | read-write | current | This object means the link local ipv6 address prefix length. |
| 1.3.6.1.4.1.2544.1.12.11.1.5.1.34 | ColumnipManagementTunnelIpMode | read-write | current | This object means the ip mode for the management tunnel. |
| 1.3.6.1.4.1.2544.1.12.11.1.5.1.35 | ColumnipManagementTunnelIpv6RipngEnabled | read-write | current | This object means the ipv6's Ripng whether enabled. |
| 1.3.6.1.4.1.2544.1.12.11.1.5.1.36 | ColumnipManagementTunnelDhcpClassIdEnabled | read-write | current | This object means the class id whether enabled. |
| 1.3.6.1.4.1.2544.1.12.11.1.5.1.37 | ColumnipManagementTunnelDhcpHostNameEnabled | read-write | current | This object means the host name whether enabled. |
| 1.3.6.1.4.1.2544.1.12.11.1.5.1.38 | ColumnipManagementTunnelDhcpHostName | read-write | current | This object describe the host name. |
| 1.3.6.1.4.1.2544.1.12.11.1.5.1.39 | ColumnipManagementTunnelDhcpLogServerEnabled | read-write | current | This object describe whether the dhcp log server enabled. |
| 1.3.6.1.4.1.2544.1.12.11.1.5.1.40 | ColumnipManagementTunnelDhcpNTPServerEnabled | read-write | current | This object describe whether the dhcp ntp server enabled. |
| 1.3.6.1.4.1.2544.1.12.11.1.5.1.41 | ColumnipManagementTunnelDhcpClientIdType | read-write | current | This object describe whether the dhcp cid type. |
| 1.3.6.1.4.1.2544.1.12.11.1.5.1.42 | ColumnipManagementTunnelDhcpHostNameType | read-write | current | This object describe whether the dhcp host name type. |
| 1.3.6.1.4.1.2544.1.12.11.1.5.1.43 | ColumnipManagementTunnelDhcpVendorInfoEnabled | read-write | current | This object means the vendor information whether enabled. |
| 1.3.6.1.4.1.2544.1.12.11.1.5.1.44 | ColumnipManagementTunnelDhcpVendorInfoType | read-write | current | This object describe whether the dhcp vendor information type. |
| 1.3.6.1.4.1.2544.1.12.11.1.5.1.45 | ColumnipManagementTunnelDhcpVendorInfo | read-write | current | This object describe the vendor information. |
| 1.3.6.1.4.1.2544.1.12.11.1.6 | TablecmIpv6InterfaceTable | not-accessible | current | User managed IPv6 Address Table. |
| 1.3.6.1.4.1.2544.1.12.11.1.6.1 | RowcmIpv6InterfaceEntry | not-accessible | current | Allows management of IPv6 Interfaces. |
| 1.3.6.1.4.1.2544.1.12.11.1.6.1.1 | ColumncmIpv6InterfaceMTU | read-only | current | This object describe the MTU for ipv6 address interface. |
| 1.3.6.1.4.1.2544.1.12.11.1.6.1.2 | ColumncmIpv6UnicastAddr | read-write | current | This object describe IPv6 Unicast Address together with Prefix. |
| 1.3.6.1.4.1.2544.1.12.11.1.6.1.3 | ColumncmIpv6UnicastAddrPrefixLen | read-write | current | This object describe prefix length of unicast address. |
| 1.3.6.1.4.1.2544.1.12.11.1.6.1.4 | ColumncmIpv6PrefixAdvertiseEnabled | read-write | current | This object describe whether to advertise prefix to link in router mode. |
| 1.3.6.1.4.1.2544.1.12.11.1.6.1.5 | ColumncmIpv6RAPrefix | read-write | current | This object describe the IPv6 Prefix to be dispatched to link in Router mode. |
| 1.3.6.1.4.1.2544.1.12.11.1.6.1.6 | ColumncmIpv6RAPrefixLength | read-write | current | This object describe Length of RA prefix. |
| 1.3.6.1.4.1.2544.1.12.11.1.6.1.7 | ColumncmIpv6StateAddrAutoConfigEnabled | read-write | current | This object describe whether enable or disable stateless address auto configuration. |
| 1.3.6.1.4.1.2544.1.12.11.1.6.1.8 | ColumncmIpv6DhcpEnabled | read-write | current | This object describe whether dhcp is enabled on the ipv6 interface. |
| 1.3.6.1.4.1.2544.1.12.11.1.6.1.9 | ColumncmIpv6DhcpRole | read-write | current | This object describe the dhcp role. |
| 1.3.6.1.4.1.2544.1.12.11.1.6.1.10 | ColumncmIpv6RIPngEnabled | read-write | current | This object describe RIPng whether enabled. |
| 1.3.6.1.4.1.2544.1.12.11.1.6.1.11 | ColumncmIpv6LinkLocAddr | read-only | current | This object describe Automatically generated Link-local Address. |
| 1.3.6.1.4.1.2544.1.12.11.1.6.1.12 | ColumncmIpv6LinkLocAddrPrefixLen | read-only | current | This object describe Length of link local IPv6 address prefix. |
| 1.3.6.1.4.1.2544.1.12.11.1.7 | TablecmIpv6StaticRouteTable | not-accessible | current | This entity's user configured Static Ipv6 Routing table. |
| 1.3.6.1.4.1.2544.1.12.11.1.7.1 | RowcmIpv6StaticRouteEntry | not-accessible | current | A particular route to a particular destina- tion, under a particular policy. |
| 1.3.6.1.4.1.2544.1.12.11.1.7.1.1 | ColumncmIpv6StaticRouteDest | not-accessible | current | The destination Ipv6 address of this route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance… |
| 1.3.6.1.4.1.2544.1.12.11.1.7.1.2 | ColumncmIpv6StaticRoutePrefixLen | not-accessible | current | Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the cmIpv6StaticRouteDest field. For those systems tha… |
| 1.3.6.1.4.1.2544.1.12.11.1.7.1.3 | ColumncmIpv6StaticRouteNextHop | not-accessible | current | On remote routes, the address of the next sys- tem en route; Otherwise, 0.0.0.0. |
| 1.3.6.1.4.1.2544.1.12.11.1.7.1.4 | ColumncmIpv6StaticRouteMetric | read-create | current | The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's cmIpv6StaticRouteProto … |
| 1.3.6.1.4.1.2544.1.12.11.1.7.1.5 | ColumncmIpv6StaticRouteRowStatus | read-create | current | The row status variable, used according to row installation and removal conventions. |
| 1.3.6.1.4.1.2544.1.12.11.1.7.1.6 | ColumncmIpv6StaticRouteInterface | not-accessible | current | Name of the Ipv6 interface for the interface static route. |
| 1.3.6.1.4.1.2544.1.12.11.1.7.1.7 | ColumncmIpv6StaticRouteAdvertise | read-create | current | Whether this static route will be advertised via routing protocol. |
| 1.3.6.1.4.1.2544.1.12.11.1.8 | TablecmNDPTable | not-accessible | current | A list of NDP entries on the NIDs. |
| 1.3.6.1.4.1.2544.1.12.11.1.8.1 | RowcmNDPEntry | not-accessible | current | A conceptual row in the cmNDPTable. Entries can be created/deleted in this table by management application action. |
| 1.3.6.1.4.1.2544.1.12.11.1.8.1.1 | ColumncmNDPIpv6Address | not-accessible | current | This object allows configuration of the NDP Entry IP Address. |
| 1.3.6.1.4.1.2544.1.12.11.1.8.1.2 | ColumncmNDPMacAddress | read-create | current | This object allows management of the NDP Entry MAC Address. |
| 1.3.6.1.4.1.2544.1.12.11.1.8.1.3 | ColumncmNDPInterface | not-accessible | current | This object allows management of the NDP Entry Interface. |
| 1.3.6.1.4.1.2544.1.12.11.1.8.1.4 | ColumncmNDPStorageType | read-create | current | The type of storage configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.11.1.8.1.5 | ColumncmNDPRowStatus | read-write | current | The status of this row. The cmNDPRowStatus object may be modified if the associated instance of this object is equal to active(1), notInService(2), or notReady… |
| 1.3.6.1.4.1.2544.1.12.11.1.8.1.6 | ColumncmNDPEntryType | read-write | current | The type of NDP Entry. Note that static entries can be created. |
| 1.3.6.1.4.1.2544.1.12.11.1.9 | TablecmProxyNDPTable | not-accessible | current | A list of Proxy NDP entries on the NIDs. This table is not supported in GE206 Release 4.1CC. |
| 1.3.6.1.4.1.2544.1.12.11.1.9.1 | RowcmProxyNDPEntry | not-accessible | current | A conceptual row in the cmProxyNDPTable. Entries can be created/deleted in this table by management application action. |
| 1.3.6.1.4.1.2544.1.12.11.1.9.1.1 | ColumncmProxyNDPIpv6Address | not-accessible | current | This object allows configuration of the ProxyNDP Entry IP Address. |
| 1.3.6.1.4.1.2544.1.12.11.1.9.1.2 | ColumncmProxyNDPIpv6PrefixLen | not-accessible | current | This object allows management of the Proxy NDP Entry Subnet Mask. |
| 1.3.6.1.4.1.2544.1.12.11.1.9.1.3 | ColumncmProxyNDPInterface | read-create | current | This object allows management of the Proxy NDP Entry Interface. |
| 1.3.6.1.4.1.2544.1.12.11.1.9.1.4 | ColumncmProxyNDPStorageType | read-create | current | The type of storage configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.11.1.9.1.5 | ColumncmProxyNDPRowStatus | read-write | current | The status of this row. The cmProxyNDPRowStatus object may be modified if the associated instance of this object is equal to active(1), notInService(2), or not… |
| 1.3.6.1.4.1.2544.1.12.11.1.10 | TablecmIpv6OverIpv4TunnelTable | not-accessible | current | A list of Ipv6OverIpv4Tunnel entries on the NIDs. |
| 1.3.6.1.4.1.2544.1.12.11.1.10.1 | RowcmIpv6OverIpv4TunnelEntry | not-accessible | current | A conceptual row in the cmIpv6OverIpv4TunnelTable. Entries can be created/deleted in this table by management application action. |
| 1.3.6.1.4.1.2544.1.12.11.1.10.1.1 | ColumncmIpv6OverIpv4TunnelIndex | not-accessible | current | An integer index value used to uniquely identify this Ipv6OverIpv4TunnelEntry in the cmIpv6OverIpv4TunnelTable. |
| 1.3.6.1.4.1.2544.1.12.11.1.10.1.2 | ColumncmIpv6OverIpv4TunnelName | read-write | current | This object describe the tunnel name. |
| 1.3.6.1.4.1.2544.1.12.11.1.10.1.3 | ColumncmIpv6OverIpv4TunnelType | read-write | current | This object describe the tunnel type. |
| 1.3.6.1.4.1.2544.1.12.11.1.10.1.4 | ColumncmIpv6OverIpv4TunnelDestIpv4Addr | read-write | current | This object describe Destination IPv4 address. Only applicable for configured tunnel. |
| 1.3.6.1.4.1.2544.1.12.11.1.10.1.5 | ColumncmIpv6OverIpv4TunnelIpv6UnicastAddress | read-write | current | This object describe Source IPv6 address used to transmit IPv6 packets on tunnel. Only writable for Configured Tunnel, read-only for other types of Tunnels. |
| 1.3.6.1.4.1.2544.1.12.11.1.10.1.6 | ColumncmIpv6OverIpv4TunnelIpv6UnicastAddrPrefixLen | read-write | current | This object describe the prefix length for the unicast ipv6 address. |
| 1.3.6.1.4.1.2544.1.12.11.1.10.1.7 | ColumncmIpv6OverIpv4TunnelLinkLocalAddress | read-only | current | This object describe the link local adderss. |
| 1.3.6.1.4.1.2544.1.12.11.1.10.1.8 | ColumncmIpv60verIpv4TunnelLinkLocalAddrPrefixLen | read-only | current | This object describe the prefix length for link local address. |
| 1.3.6.1.4.1.2544.1.12.11.1.10.1.9 | ColumncmIpv6OverIpv4TunnelAssociatedIpv4Interface | read-write | current | the IPv4 Interface that Tunnel is created on, which could be DCN or Management tunnel. |
| 1.3.6.1.4.1.2544.1.12.11.1.10.1.10 | ColumncmIpv6OverIpv4TunnelStorageType | read-create | current | The type of storage configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.11.1.10.1.11 | ColumncmIpv6OverIpv4TunnelRowStatus | read-write | current | The status of this row. The cmIpv6OverIpv4TunnelRowStatus object may be modified if the associated instance of this object is equal to active(1), notInService(… |
| 1.3.6.1.4.1.2544.1.12.11.1.10.1.12 | ColumncmIpv6OverIpv4PotentialRouterList | read-create | current | This object describe the potential router list. And its format should be like 'a.b.c.d,e.f.g.h', split by ',' and no breakspace there. |
| 1.3.6.1.4.1.2544.1.12.11.2 | NodecmIpConformance | |||
| 1.3.6.1.4.1.2544.1.12.11.2.1 | NodeipCompliances | |||
| 1.3.6.1.4.1.2544.1.12.11.2.1.1 | ComplianceipCompliance | current | Describes the requirements for compliance to the IP Module. | |
| 1.3.6.1.4.1.2544.1.12.11.2.2 | NodeipGroups | |||
| 1.3.6.1.4.1.2544.1.12.11.2.2.1 | GroupipGroup | current | A collection of objects used to manage the FSP150CM IP Services. | |
| 1.3.6.1.4.1.2544.1.12.11.2.2.2 | Groupipv6Group | current | A collection of objects used to manage the FSP150CM IPv6 Services. | |
| 1.3.6.1.4.1.2544.1.12.11.3 | NodecmIpScalars | |||
| 1.3.6.1.4.1.2544.1.12.11.3.1 | NodecmIpSystemScalars | |||
| 1.3.6.1.4.1.2544.1.12.11.3.1.1 | ScalarcmIpFlushARPCacheAction | read-write | current | This object allows user to initiate Flush ARP action. |
| 1.3.6.1.4.1.2544.1.12.11.3.1.2 | ScalarcmIpProxyARPEnabled | read-write | current | This object allows user to enable/disable Proxy ARP. |
| 1.3.6.1.4.1.2544.1.12.11.3.1.3 | ScalarcmIpPingDestination | read-write | current | This object allows user to specify the IP Address to which ICMP Ping will be initiated. |
| 1.3.6.1.4.1.2544.1.12.11.3.1.4 | ScalarcmIpInitiatePingAction | read-write | current | This object allows user to initiate ICMP Ping on cmIpPingDestination. |
| 1.3.6.1.4.1.2544.1.12.11.3.1.5 | ScalarcmIpPingResult | read-only | current | This object provides the results of a previous ICMP Ping Action. |
| 1.3.6.1.4.1.2544.1.12.11.3.1.6 | ScalarcmIpTraceRouteDestination | read-write | current | This object allows user to specify the IP Address to which Trace Route will be initiated. |
| 1.3.6.1.4.1.2544.1.12.11.3.1.7 | ScalarcmIpInitiateTraceRouteAction | read-write | current | This object allows user to initiate TraceRoute on cmIpTraceRouteDestination. |
| 1.3.6.1.4.1.2544.1.12.11.3.1.8 | ScalarcmIpTraceRouteResult | read-only | current | This object provides the results of a previous TraceRoute Action. |
| 1.3.6.1.4.1.2544.1.12.11.3.1.9 | ScalarcmIpManagementTrafficBridgingEnabled | read-write | current | This object allows the user to control the IP Management Traffic Bridging feature. When enabled, the system is managed using the IP address specified at the Ma… |
| 1.3.6.1.4.1.2544.1.12.11.3.1.10 | ScalarcmIpManagementTrafficBridgingSecurityEnabled | read-write | current | This object allows the user to control the IP Management Traffic Bridging feature's security. When enables, the system supports a secure Management Traffic Bri… |
| 1.3.6.1.4.1.2544.1.12.11.3.1.11 | ScalarcmIpv6PingInterface | read-write | current | This object allows user to specify the IPV6 Address related interface. |
| 1.3.6.1.4.1.2544.1.12.11.3.1.12 | ScalarcmIpv6PingDestination | read-write | current | This object allows user to specify the IPV6 Address to which ICMP Ping will be initiated. |
| 1.3.6.1.4.1.2544.1.12.11.3.1.13 | ScalarcmIpv6InitiatePingAction | read-write | current | This object allows user to initiate ICMP Ping on cmIpv6PingDestination. |
| 1.3.6.1.4.1.2544.1.12.11.3.1.14 | ScalarcmIpv6TraceRouteDestination | read-write | current | This object allows user to specify the IPV6 Address to which Trace Route will be initiated. |
| 1.3.6.1.4.1.2544.1.12.11.3.1.15 | ScalarcmIpv6InitiateTraceRouteAction | read-write | current | This object allows user to initiate TraceRoute on cmIpv6TraceRouteDestination. |
| 1.3.6.1.4.1.2544.1.12.11.3.1.16 | ScalarcmIpv6ProxyNDPEnabled | read-write | current | This object whether enabled proxy NDP. |
| 1.3.6.1.4.1.2544.1.12.11.3.1.17 | ScalarcmIpv6FwdEnabled | read-write | current | This object whether NE works in router mode or host mode. Forwarding enable:router mode, forwarding disable: host mode. |
| 1.3.6.1.4.1.2544.1.12.11.3.1.18 | ScalarcmIpFlushNDPCacheAction | read-write | current | This object allows user to initiate Flush NDP action. |
| 1.3.6.1.4.1.2544.1.12.11.3.1.19 | ScalarcmIpPtpArpRtrvAction | read-write | current | If user want to get PTP arp from cmARPEntry, user need to configure this object first. |
| 1.3.6.1.4.1.2544.1.12.11.3.1.20 | ScalarcmIpManagementTrafficDscpEnabled | read-write | current | This object controls whether the DSCP value is modified for the transmitted management traffic whether it is locally generated or routed. |
| 1.3.6.1.4.1.2544.1.12.11.3.1.21 | ScalarcmIpManagementTrafficDscp | read-write | current | This object specifies the DSCP value and it is applicable when cmIpManagementTrafficDscpEnabled is enabled. |
| 1.3.6.1.4.1.2544.1.12.11.3.2 | NodecmIpSourceAddrScalars | |||
| 1.3.6.1.4.1.2544.1.12.11.3.2.1 | ScalarcmIpSNMPv1InterfaceName | read-write | current | This object allows the user to specify the IP interface name, which will be used in the SNMPv1 TRAP PDUs as the Agent's IP Address. |
| 1.3.6.1.4.1.2544.1.12.11.3.2.2 | ScalarcmIpSourceAddressType | read-write | current | This object allows the user to specify whether the System IP Address or the Outgoing IP Interface's Address should be used in outgoing IP PDUs. |
| 1.3.6.1.4.1.2544.1.12.11.3.2.3 | ScalarcmIpSourceAddressInterfaceName | read-write | current | This object allows the user to specify the IP interface name when cmIpSourceAddressType is 'systemipaddr'. The IP Address associated with the IP interface name… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CmDhcpRole | INTEGER { dhcp-client(1), dhcp-server(2) } | current | DHCP role when DHCP is enabled on an interface. |
| DHCPCIDType | INTEGER { notApplicable(1), sysName(2), macAddr(3), userDefined(4), serialNumber(5) } | current | DHCP Client ID Type. |
| DHCPHostNameType | INTEGER { notApplicable(1), sysName(2), userDefined(3) } | current | DHCP Hostname Type. |
| DHCPVendorInfoType | INTEGER { notApplicable(1), sysName(2), userDefined(3) } | current | DHCP Vendor Info Type. |
| IpActionType | INTEGER { not-applicable(0), initiate (1) } | current | . |
| IpEntryType | INTEGER { static(1), dynamic(2) } | current | IP Entry type. |
| IpManagementTunnelEncapsulationType | INTEGER { ethernet(1), ppp(2) } | current | IP Management Tunnel Encapsulation type. |
| IpManagementTunnelType | INTEGER { macbased(1), vlanbased(2), itagbased(3), gcc0based(4), gcc1based(5), gcc2based(6) } | current | IP Management Tunnel type. |
| IpMode | INTEGER { ipv4-only (0), ipv6-only (1), ipv4-and-ipv6(2) } | current | include 3 types. |
| IpSourceAddrType | INTEGER { systemipaddr(1), outipinterfaceaddr(2) } | current | IP Source Address type. |
| Ipv6OverIpv4TunnelType | INTEGER { sixToFour (1), ipv4-compatible (2), isatap (3), static-config (4), gre (5), ipv6-6rd (6) } | current | include four types. |
| PtpArpActionType | INTEGER { not-applicable(0), retrieve (1) } | current | . |