COMPAQ-AGENT-MIB
115 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.232.161.3.1 | NodeagentGeneralMgmt | |||
| 1.3.6.1.4.1.232.161.3.1.1 | NodeagentBasicInfo | |||
| 1.3.6.1.4.1.232.161.3.1.1.1 | ScalaragentMgmtProtocolCapability | read-only | mandatory | The network management protocol(s) supported by this agent. |
| 1.3.6.1.4.1.232.161.3.1.1.2 | TableagentMibCapabilityTable | not-accessible | mandatory | A list of MIB capability entries supported by this agent. |
| 1.3.6.1.4.1.232.161.3.1.1.2.1 | RowagentMibCapabilityEntry | not-accessible | mandatory | A MIB capability entry contains objects describing a particular MIB supported by this agent. |
| 1.3.6.1.4.1.232.161.3.1.1.2.1.1 | ColumnagentMibCapabilityIndex | read-only | mandatory | A list of agentMibCapabilityDescr entries. |
| 1.3.6.1.4.1.232.161.3.1.1.2.1.2 | ColumnagentMibCapabilityDescr | read-only | mandatory | The name of the MIB supported by the agent. |
| 1.3.6.1.4.1.232.161.3.1.1.2.1.3 | ColumnagentMibCapabilityVersion | read-only | mandatory | The version of the MIB specified in this entry. |
| 1.3.6.1.4.1.232.161.3.1.1.2.1.4 | ColumnagentMibCapabilityType | read-only | mandatory | The type of the MIB specified in this entry. |
| 1.3.6.1.4.1.232.161.3.1.1.3 | ScalaragentStatusConsoleInUse | read-only | mandatory | This indicates whether console is currently in-use. |
| 1.3.6.1.4.1.232.161.3.1.1.4 | ScalaragentStatusSaveCfg | read-only | mandatory | This indicates the status of the device configuration. other(1) - this entry is currently in use but the conditions under which it will remain so are different… |
| 1.3.6.1.4.1.232.161.3.1.1.5 | ScalaragentSwitchMfgDate | read-only | mandatory | The switch manufacturing date and time. |
| 1.3.6.1.4.1.232.161.3.1.1.6 | ScalaragentSwitchFirmwareMfgDate | read-only | mandatory | The switch firmware manufacturing date and time. |
| 1.3.6.1.4.1.232.161.3.1.2 | NodeagentBasicConfig | |||
| 1.3.6.1.4.1.232.161.3.1.2.1 | TableagentBscSwFileTable | not-accessible | mandatory | A list of MIB Basic Config entries supported file Update by this agent. |
| 1.3.6.1.4.1.232.161.3.1.2.1.1 | RowagentBscSwFileEntry | not-accessible | mandatory | A basic config entry contains objects describing a particular MIB supported by this agent. |
| 1.3.6.1.4.1.232.161.3.1.2.1.1.1 | ColumnagentBscSwFileIndex | read-write | mandatory | The table index for the file entry |
| 1.3.6.1.4.1.232.161.3.1.2.1.1.2 | ColumnagentBscSwFileDscr | read-write | mandatory | The description for the purpose of the software file in this entry. Note: For system which does not support change of this object, setting value to this object… |
| 1.3.6.1.4.1.232.161.3.1.2.1.1.3 | ColumnagentBscSwFileAddr | read-write | mandatory | The IP address where the File to be downloaded is located, or the IP address where the file will be uploaded to. |
| 1.3.6.1.4.1.232.161.3.1.2.1.1.4 | ColumnagentBscSwFileTransferType | read-write | mandatory | The channel through which the file will be downloaded or uploaded. Note: For system which does not support all channels, setting value to the unsupported chann… |
| 1.3.6.1.4.1.232.161.3.1.2.1.1.5 | ColumnagentBscSwFile | read-write | mandatory | The name of the file to be downloaded from the TFTP server, or to be uploaded to. |
| 1.3.6.1.4.1.232.161.3.1.2.1.1.6 | ColumnagentBscSwFileLocateId | read-write | mandatory | This object describes the type of the file. runtime-code(1), log-file(2), cfg-file(3) Note: For system which does not support change of this object, setting va… |
| 1.3.6.1.4.1.232.161.3.1.2.1.1.7 | ColumnagentBscSwFileLoadType | read-write | mandatory | This object provides the user to select download or upload function for the file. Note: For system which does not support change of this object, setting value … |
| 1.3.6.1.4.1.232.161.3.1.2.1.1.8 | ColumnagentBscSwFileCtrl | read-write | mandatory | This object provides the user to download runtime software. The setting will take effect when the system is restart. See Note(1) below Note: For system which d… |
| 1.3.6.1.4.1.232.161.3.1.2.1.1.9 | ColumnagentBscFileServerTftpPort | read-write | mandatory | The IP port used by the TFTP server. |
| 1.3.6.1.4.1.232.161.3.1.2.1.1.10 | ColumnagentBscSwFileTime | read-only | mandatory | Configuration/firmware file last saved Date/Time, NULL if unknown. Unknown if time has not been set by SNTP or manual entry when the configuration/firmware fil… |
| 1.3.6.1.4.1.232.161.3.1.2.1.1.11 | ColumnagentBscSwFileStatus | read-only | mandatory | Status of last download attempt. See trap switchFileInvalid. Read-only initialized to NULL |
| 1.3.6.1.4.1.232.161.3.1.2.2 | ScalaragentFileTransfer | read-write | obsolete | This object will execute the download or upload action. If start(2), it will begin to download/upload, but no reset as follow. If start-and-reset(3), then the … |
| 1.3.6.1.4.1.232.161.3.1.2.3 | ScalaragentSystemReset | read-write | mandatory | This object indicates the agent system reset state. Setting this object to no-reset(4) has no effect. Setting this object to cold-start(2) or warm-start(3) wil… |
| 1.3.6.1.4.1.232.161.3.1.2.4 | ScalaragentRs232PortConfig | read-write | mandatory | This object indicates the RS-232C mode while device restart. |
| 1.3.6.1.4.1.232.161.3.1.2.5 | ScalaragentOutOfBandBaudRateConfig | read-write | obsolete | This object allows user to specify out_of_band baud rate. It will take effect when the system is restart. Note: Because these funiction will be limited by the … |
| 1.3.6.1.4.1.232.161.3.1.2.6 | ScalaragentSaveCfg | read-write | mandatory | As the object is set to 'set(3)', the current device configuration will be saved into to NV-RAM. |
| 1.3.6.1.4.1.232.161.3.1.3 | NodeagentIpProtoConfig | |||
| 1.3.6.1.4.1.232.161.3.1.3.1 | ScalaragentIpNumOfIf | read-only | mandatory | The total number of IP interfaces supported by this agent. |
| 1.3.6.1.4.1.232.161.3.1.3.2 | ScalaragentIpTftpServerAddr | read-write | obsolete | The IP Address of TFTP Server. |
| 1.3.6.1.4.1.232.161.3.1.3.3 | ScalaragentIpGetIpFrom | read-write | mandatory | This object indicates whether the agent get its system IP address from Bootp/DHCP server at start up. |
| 1.3.6.1.4.1.232.161.3.1.4 | NodeagentIpTrapManager | |||
| 1.3.6.1.4.1.232.161.3.1.4.1 | TableagentIpTrapManagerTable | not-accessible | mandatory | A list of trap managers to which SNMP traps will be sent. |
| 1.3.6.1.4.1.232.161.3.1.4.1.1 | RowagentIpTrapManagerEntry | not-accessible | mandatory | Each entry contains the particular trap manager settings. |
| 1.3.6.1.4.1.232.161.3.1.4.1.1.1 | ColumnagentIpTrapManagerIpAddr | read-only | mandatory | The IP address where SNMP traps will be destined for |
| 1.3.6.1.4.1.232.161.3.1.4.1.1.2 | ColumnagentIpTrapManagerComm | read-write | mandatory | The community string used to encode SNMP trap packet to be sent to the trap manager. |
| 1.3.6.1.4.1.232.161.3.1.4.1.1.3 | ColumnagentIpTrapManagerStatus | read-write | mandatory | This object indicates whether or not the trap should be sent to this trap manager. |
| 1.3.6.1.4.1.232.161.3.1.5 | NodeagentConsoleModeManager | |||
| 1.3.6.1.4.1.232.161.3.1.5.1 | ScalaragentConsoleModeManagerDataBits | read-write | mandatory | The DataBits for console mode, If the agentRs232PortConfig change to console mode then the device will use this group to make a setup for console value and age… |
| 1.3.6.1.4.1.232.161.3.1.5.2 | ScalaragentConsoleModeManagerStopBits | read-write | mandatory | The Stop Bits for console mode |
| 1.3.6.1.4.1.232.161.3.1.5.3 | ScalaragentConsoleModeManagerParity | read-write | mandatory | The Parity for console mode, If the agentRs232PortConfig change to console mode then the device will use this group to make a setup for console value and agent… |
| 1.3.6.1.4.1.232.161.3.1.5.4 | ScalaragentConsoleModeManagerBaudRate | read-write | mandatory | The transmit rate for console mode. |
| 1.3.6.1.4.1.232.161.3.1.6 | NodeagentSlipModeManager | |||
| 1.3.6.1.4.1.232.161.3.1.6.1 | ScalaragentSlipModeManagerLocalIP | read-write | mandatory | The Local IP address for slip mode, If the agentRs232PortConfig change to out-of-band mode then the device will use this group to make a setup for slip value a… |
| 1.3.6.1.4.1.232.161.3.1.6.2 | ScalaragentSlipModeManagerRemoteIP | read-write | mandatory | The Remote IP address for slip mode |
| 1.3.6.1.4.1.232.161.3.1.6.3 | ScalaragentSlipModeManagerMTU | read-write | mandatory | The MTU Value for Slip Mode |
| 1.3.6.1.4.1.232.161.3.1.6.4 | ScalaragentSlipModeManagerBaudRate | read-write | mandatory | The MTU Value for Slip Mode |
| 1.3.6.1.4.1.232.161.3.1.7 | NodeagentSNTP | |||
| 1.3.6.1.4.1.232.161.3.1.7.1 | ScalaragentSNTPState | read-write | mandatory | This object enable/disable the SNTP function. |
| 1.3.6.1.4.1.232.161.3.1.7.2 | ScalaragentSNTPTimeSource | read-only | mandatory | the SNTP server status for time source changing |
| 1.3.6.1.4.1.232.161.3.1.7.3 | ScalaragentSNTPServer1IPAddr | read-write | mandatory | Configure the SNTP server #1 IP address |
| 1.3.6.1.4.1.232.161.3.1.7.4 | ScalaragentSNTPServer2IPAddr | read-write | mandatory | Configure the SNTP server #2 IP address |
| 1.3.6.1.4.1.232.161.3.1.7.5 | ScalaragentSNTPTimeZone | read-write | mandatory | Local time offset in minutes from GMT. |
| 1.3.6.1.4.1.232.161.3.1.7.6 | ScalaragentSNTPPollInterval | read-write | mandatory | Update time in seconds from SNTP server. |
| 1.3.6.1.4.1.232.161.3.1.7.7 | ScalaragentSNTPCurrentTime | read-only | mandatory | the mandatory network time was got from the SNTP server |
| 1.3.6.1.4.1.232.161.3.1.7.8 | ScalaragentSNTPUpTime | read-only | mandatory | The time (in second) since the network management portion of the system was last re-initialized. It is the same as sysUptime. |
| 1.3.6.1.4.1.232.161.3.1.7.9 | ScalaragentSNTPBootTime | read-only | mandatory | The boot time of the switch is equal to subtract systemUpTime from agentSNTPNetworkTime |
| 1.3.6.1.4.1.232.161.3.1.8 | NodeagentDST | |||
| 1.3.6.1.4.1.232.161.3.1.8.1 | ScalaragentDSTStatus | read-write | mandatory | An indication of whether the DST(Daylight Saving Time) feature is enabled on this device. When this object is set to repeating(2), or annual(3) then all the ot… |
| 1.3.6.1.4.1.232.161.3.1.8.2 | ScalaragentDSTOffset | read-write | mandatory | The value of this object indicates number of minutes to add or to subtract during DST. This object is not instantiated when agentDSTStatus object is set to fal… |
| 1.3.6.1.4.1.232.161.3.1.8.3 | ScalaragentDSTRepeatingStartMonth | read-write | mandatory | the repeating start month (January = 1, .., Decenber = 12) |
| 1.3.6.1.4.1.232.161.3.1.8.4 | ScalaragentDSTRepeatingStartWhichDay | read-write | mandatory | WhichDay means 0 = last week 1 = 1st week 2 = 2nd week 3 = 3th week 4 = 4th week |
| 1.3.6.1.4.1.232.161.3.1.8.5 | ScalaragentDSTRepeatingStartDayOfWeek | read-write | mandatory | Day Of Week Sun = 1 Mon = 2 Tue = 3 Wed = 4 Thu = 5 Fri = 6 Sat = 7 |
| 1.3.6.1.4.1.232.161.3.1.8.6 | ScalaragentDSTRepeatingStartHour | read-write | mandatory | the hour of the DST Repeating Start Day of Week |
| 1.3.6.1.4.1.232.161.3.1.8.7 | ScalaragentDSTRepeatingStartMinute | read-write | mandatory | the minute of the DST Repeating Start Hour |
| 1.3.6.1.4.1.232.161.3.1.8.8 | ScalaragentDSTRepeatingEndMonth | read-write | mandatory | the repeating end month (January = 1, .., Decenber = 12) |
| 1.3.6.1.4.1.232.161.3.1.8.9 | ScalaragentDSTRepeatingEndWhichDay | read-write | mandatory | WhichDay means 0 = last week 1 = 1st week 2 = 2nd week 3 = 3th week 4 = 4th week |
| 1.3.6.1.4.1.232.161.3.1.8.10 | ScalaragentDSTRepeatingEndDayOfWeek | read-write | mandatory | Day Of Week Sun = 1 Mon = 2 Tue = 3 Wed = 4 Thu = 5 Fri = 6 Sat = 7 |
| 1.3.6.1.4.1.232.161.3.1.8.11 | ScalaragentDSTRepeatingEndHour | read-write | mandatory | the hour of the DST Repeating End Day of Week |
| 1.3.6.1.4.1.232.161.3.1.8.12 | ScalaragentDSTRepeatingEndMinute | read-write | mandatory | the minute of the DST Repeating End Hour |
| 1.3.6.1.4.1.232.161.3.1.8.13 | ScalaragentDSTAnnualStartMonth | read-write | mandatory | the annual start month (January = 1, .., Decenber = 12) |
| 1.3.6.1.4.1.232.161.3.1.8.14 | ScalaragentDSTAnnualStartDayOfMonth | read-write | mandatory | the day of annual start month |
| 1.3.6.1.4.1.232.161.3.1.8.15 | ScalaragentDSTAnnualStartHour | read-write | mandatory | the hour of the annual start day |
| 1.3.6.1.4.1.232.161.3.1.8.16 | ScalaragentDSTAnnualStartMinute | read-write | mandatory | the minute of the annual start hour |
| 1.3.6.1.4.1.232.161.3.1.8.17 | ScalaragentDSTAnnualEndMonth | read-write | mandatory | the annual end month (January = 1, .., Decenber = 12) |
| 1.3.6.1.4.1.232.161.3.1.8.18 | ScalaragentDSTAnnualEndDayOfMonth | read-write | mandatory | the day of annual end month |
| 1.3.6.1.4.1.232.161.3.1.8.19 | ScalaragentDSTAnnualEndHour | read-write | mandatory | the hour of annual end day of month |
| 1.3.6.1.4.1.232.161.3.1.8.20 | ScalaragentDSTAnnualEndMinute | read-write | mandatory | the minute of annual end hour |
| 1.3.6.1.4.1.232.161.3.3 | NodeagentSwitchCommonMgmt | |||
| 1.3.6.1.4.1.232.161.3.3.1 | NodeagentSwitchCube | |||
| 1.3.6.1.4.1.232.161.3.3.1.1 | TableagentSwitchCubeTable | not-accessible | mandatory | A table of cube information. |
| 1.3.6.1.4.1.232.161.3.3.1.1.1 | RowagentSwitchCubeEntry | not-accessible | mandatory | A switch cube description. |
| 1.3.6.1.4.1.232.161.3.3.1.1.1.1 | ColumnagentSwitchCubeType | read-only | mandatory | This specifies the type of this instance of cube. This value will be one of the following: other(1) Cube type could not be determined. dualTSX(2) Switch Dual B… |
| 1.3.6.1.4.1.232.161.3.3.1.1.1.2 | ColumnagentSwitchCubeSpareName | read-only | mandatory | The name of the cube. The string will be empty if the cube does not report the name or it could not be determined. |
| 1.3.6.1.4.1.232.161.3.3.1.1.1.3 | ColumnagentSwitchCubeSparePartNumber | read-only | mandatory | The spare part number of the cube. The string will be empty if the enclosure does not report this function. |
| 1.3.6.1.4.1.232.161.3.3.2 | NodeagentSwitchPowerSupply | |||
| 1.3.6.1.4.1.232.161.3.3.2.1 | TableagentSwitchPowerSupplyTable | not-accessible | mandatory | A table of power supply information. |
| 1.3.6.1.4.1.232.161.3.3.2.1.1 | RowagentSwitchPowerSupplyEntry | not-accessible | mandatory | A switch power supply description. |
| 1.3.6.1.4.1.232.161.3.3.2.1.1.1 | ColumnagentSwitchPowerSupplyIndex | read-only | mandatory | A number that uniquely specifies this power supply in the enclosure. |
| 1.3.6.1.4.1.232.161.3.3.2.1.1.2 | ColumnagentSwitchPowerSupplyMaxPwrOutput | read-only | mandatory | The maximum power output of the power supply in watts. The value will be -1 if the power supply does not report the value. |
| 1.3.6.1.4.1.232.161.3.3.2.1.1.3 | ColumnagentSwitchPowerSupplyCurPwrOutput | read-only | mandatory | The current power output of the power supply in watts. The value will be -1 if the power supply does not report the value. |
| 1.3.6.1.4.1.232.161.3.3.2.1.1.4 | ColumnagentSwitchPowerSupplyIntakeTemp | read-only | mandatory | The current air temperature at the intake of the power supply in degrees celsius. The value will be -1 if the power supply does not report the value. |
| 1.3.6.1.4.1.232.161.3.3.2.1.1.5 | ColumnagentSwitchPowerSupplyExhaustTemp | read-only | mandatory | The current air temperature at the exhaust of the power supply in degrees celsius. The value will be -1 if the power supply does not report the value. |
| 1.3.6.1.4.1.232.161.3.3.2.1.1.6 | ColumnagentSwitchPowerSupplyStatus | read-only | mandatory | The status of the power supply. |
| 1.3.6.1.4.1.232.161.3.3.2.1.1.7 | ColumnagentSwitchPowerSupplyInputLineStatus | read-only | mandatory | The status of line input power. |
| 1.3.6.1.4.1.232.161.3.3.2.1.1.8 | ColumnagentSwitchPowerSupplyCondition | read-only | mandatory | The condition of the power supply. This value will be one of the following: other(1) The status could not be determined or not present. ok(2) The power supply … |
| 1.3.6.1.4.1.232.161.3.3.3 | NodeagentSwitchFan | |||
| 1.3.6.1.4.1.232.161.3.3.3.1 | TableagentSwitchFanTable | not-accessible | mandatory | A table of fan information. |
| 1.3.6.1.4.1.232.161.3.3.3.1.1 | RowagentSwitchFanEntry | not-accessible | mandatory | A switch fan description. |
| 1.3.6.1.4.1.232.161.3.3.3.1.1.1 | ColumnagentSwitchFanIndex | read-only | mandatory | A number that uniquely specifies this fan within this server enclosure in the rack. |
| 1.3.6.1.4.1.232.161.3.3.3.1.1.2 | ColumnagentSwitchFanCondition | read-only | mandatory | The condition of the fan. This value will be one of the following: other(1) Fan status detection is not supported. ok(2) The fan is operating properly. degrade… |
| 1.3.6.1.4.1.232.161.3.3.4 | NodeagentSwitchTempSensor | |||
| 1.3.6.1.4.1.232.161.3.3.4.1 | TableagentSwitchTempSensorTable | not-accessible | mandatory | A table of temperature sensor information. |
| 1.3.6.1.4.1.232.161.3.3.4.1.1 | RowagentSwitchTempSensorEntry | not-accessible | mandatory | A switch temperature sensor description. |
| 1.3.6.1.4.1.232.161.3.3.4.1.1.1 | ColumnagentSwitchTempSensorIndex | read-only | mandatory | A number that uniquely specifies this temperature sensor within this server enclosure in the rack. |
| 1.3.6.1.4.1.232.161.3.3.4.1.1.2 | ColumnagentSwitchTempSensorCurrent | read-only | mandatory | This is the current temperature sensor reading in degrees celsius. If this value cannot be determined by software, then a value of -1 will be returned. |
| 1.3.6.1.4.1.232.161.3.3.4.1.1.3 | ColumnagentSwitchTempSensorThreshold | read-only | mandatory | This is the threshold temperature sensor setting in degrees celsius. This is the temperature in which the sensor will be considered to be in a tripped state th… |
| 1.3.6.1.4.1.232.161.3.3.4.1.1.4 | ColumnagentSwitchTempSensorCondition | read-only | mandatory | The Temperature sensor condition. This value will be one of the following: other(1) Temperature could not be determined. ok(2) The temperature sensor is within… |
| 1.3.6.1.4.1.232.161.3.3.4.1.1.5 | ColumnagentSwitchTempSensorTempType | read-only | mandatory | This specifies the type of this instance of temperature sensor. This value will be one of the following: other(1) Temperature threshold type could not be deter… |
| 1.3.6.1.4.1.232.161.3.3.9999 | ScalarendOfMIB | read-only | mandatory | End of MIB |