CPE-MANAGER
132 objects
The CPE Configuration Manager (a.k.a. Zero Touch Configuration) provides the ability for management software to automatically maintain CPE software version and boot time configuration on Zhone manufactured CPEs. To support this feature, Zhone CO equipment must maintain a database correlating a specified link with the required software version and configuration of the CPE at the far end of that link. This information is used to verify that the connected CPE is running the correct software image and is correctly configured. If it is not, the CPE will be automatically reconfigured to the correct software version and configuration as configured by these tables.
Imported Objects
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | MacAddress TruthValue |
| ZHONE-SYSTEM-MIB | cpeMgr |
| Zhone-TC | ZhoneRowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5504.3.1.21.1 | IdentitycpeMgrModule | indexing | The CPE Configuration Manager (a.k.a. Zero Touch Configuration) provides the ability for management software to automatically maintain CPE software version and… | |
| 1.3.6.1.4.1.5504.3.1.21.1.1 | IdentitycpeMgrGlobal | current | Global objects used by CPE Manager. | |
| 1.3.6.1.4.1.5504.3.1.21.1.1.1 | IdentitycpeMgrGlobalObjects | current | CPE Manager Global Objects. | |
| 1.3.6.1.4.1.5504.3.1.21.1.1.1.1 | ScalarcpeMgrLocalVlanId | read-write | current | Local VLAN ID used as the management VLAN between a CO device and locally managed CPEs. This VLAN should not be used for anything other than management traffic… |
| 1.3.6.1.4.1.5504.3.1.21.1.1.1.2 | ScalarcpeMgrLocalSlanId | read-write | current | Local SLAN ID used as the management SLAN between a CO device and locally managed CPEs. This SLAN should not be used for anything other than management traffic… |
| 1.3.6.1.4.1.5504.3.1.21.1.1.1.3 | ScalarcpeCfgMgrConcurrentUpdateLimit | read-write | current | The number of CPEs that can be granted the short lease IP with required updates by this CO device before an update storm is declared. Since downloads and uploa… |
| 1.3.6.1.4.1.5504.3.1.21.1.1.2 | IdentitycpeMgrGlobalConformance | current | CPE Manager Global Objects Conformance. | |
| 1.3.6.1.4.1.5504.3.1.21.1.1.2.1 | IdentitycpeMgrGlobalGroups | current | CPE Manager Global Conformance Groups. | |
| 1.3.6.1.4.1.5504.3.1.21.1.1.2.1.1 | GroupcpeMgrGlobalGroup | current | Global parameters used by the CPE Manager application. | |
| 1.3.6.1.4.1.5504.3.1.21.1.1.2.2 | IdentitycpeMgrGlobalCompliances | current | CPE Manager Compliances. | |
| 1.3.6.1.4.1.5504.3.1.21.1.1.2.2.1 | CompliancecpeMgrGlobalCompliance | current | The compliance statement for managed CPE Manager global entities. | |
| 1.3.6.1.4.1.5504.3.1.21.1.2 | IdentitycpeConfigMgr | current | CPE Configuration Manager. | |
| 1.3.6.1.4.1.5504.3.1.21.1.2.0 | IdentitycpeConfigMgrNotifications | current | CPE Config Manager Notifications. | |
| 1.3.6.1.4.1.5504.3.1.21.1.2.0.1 | NotificationcpeConfigMgrClientOperational | current | Trap flagging a CPE as operational. This means the listed CPE did not need any image or configuration updates and was granted the operational lease time on its… | |
| 1.3.6.1.4.1.5504.3.1.21.1.2.0.2 | NotificationcpeConfigMgrClientDysfunctional | current | Trap flagging a CPE as having repeated update errors. This means the listed CPE repeatedly attempted to perform an update and failed. At this point the CPE is … | |
| 1.3.6.1.4.1.5504.3.1.21.1.2.0.3 | NotificationcpeConfigMgrMismatchType | current | This trap from CPE Config Manager on a CO device is sent when a CPE's reportedCpeType does not match any cpeType's defined by cpeConfigMgr's of the same cpeCon… | |
| 1.3.6.1.4.1.5504.3.1.21.1.2.0.4 | NotificationcpeConfigMgrMismatchSoftwareVersion | current | This trap from CPE Config Manager on a CO device is sent when the software version reported by the CPE does not agree with the software version required by the… | |
| 1.3.6.1.4.1.5504.3.1.21.1.2.0.5 | NotificationcpeConfigMgrMismatchWebUIVersion | current | This trap from CPE Config Manager on a CO device is sent when the WebUI version reported by the CPE does not agree with the WebUI version required by the cpeCo… | |
| 1.3.6.1.4.1.5504.3.1.21.1.2.0.6 | NotificationcpeConfigMgrMismatchConfigFile | current | This trap from CPE Config Manager on a CO device is sent when the config filename reported by the CPE does not agree with either the cpeGenericConfigFile requi… | |
| 1.3.6.1.4.1.5504.3.1.21.1.2.0.7 | NotificationcpeConfigMgrUpdateError | current | This trap from CPE Config Manager on a CO device is sent if it detects an update to a CPE failed. | |
| 1.3.6.1.4.1.5504.3.1.21.1.2.1 | IdentitycpeConfigMgrObjects | current | CPE Configuration Manager Objects. | |
| 1.3.6.1.4.1.5504.3.1.21.1.2.1.1 | TablecpeConfigMgrTable | not-accessible | current | The CPE Configuration Manager Table defines the common attributes applicable to a specific CPE type. There can be multiple cpeConfigMgrEntry's for each type of… |
| 1.3.6.1.4.1.5504.3.1.21.1.2.1.1.1 | RowcpeConfigMgrEntry | not-accessible | current | One CPE Configuration Manager. |
| 1.3.6.1.4.1.5504.3.1.21.1.2.1.1.1.1 | ColumncpeConfigMgrRowStatus | read-create | current | The standard field for creating/destroying an entry via SNMP. |
| 1.3.6.1.4.1.5504.3.1.21.1.2.1.1.1.2 | ColumncpeConfigMgrIndex | accessible-for-notify | current | Index to the cpeConfigMgrTable. |
| 1.3.6.1.4.1.5504.3.1.21.1.2.1.1.1.3 | ColumncpeConfigMgrName | read-create | current | This is an ASCII string containing the customer assigned name. Maximum length is 32 characters, and no whitespaces are allowed. |
| 1.3.6.1.4.1.5504.3.1.21.1.2.1.1.1.4 | ColumncpeConfigMgrGroup | read-create | current | The value of this field will be a simple integer defining a group of associated cpeConfigMgr's. All cpeConfigMgr's with the same group value form this associat… |
| 1.3.6.1.4.1.5504.3.1.21.1.2.1.1.1.5 | ColumnmanagedCpeType | read-create | current | This field designates the type of CPE configured by this entry. This string must match the string returned by the attached CPE exactly. |
| 1.3.6.1.4.1.5504.3.1.21.1.2.1.1.1.6 | ColumnrequiredCpeSoftwareVersion | read-create | current | A string defining the software version. If the value of this field doesn't match the software version string returned by the CPE exactly, then a software updat… |
| 1.3.6.1.4.1.5504.3.1.21.1.2.1.1.1.7 | ColumnrequiredCpeSoftwareFilename | read-create | current | A string that specifies the filename the CPE must download if the requiredCpeSoftwareVersion comparison fails. This file must be available in the base path loc… |
| 1.3.6.1.4.1.5504.3.1.21.1.2.1.1.1.8 | ColumnrequiredCpeWebUIVersion | read-create | current | A string defining the WebUI version. This version string must match exactly what the CPE returns or an upgrade of the WebUI file will be initiated. This only a… |
| 1.3.6.1.4.1.5504.3.1.21.1.2.1.1.1.9 | ColumnrequiredCpeWebUIFilename | read-create | current | A string that specifies the filename the CPE must download if the requiredCpeWebUIVersion comparison fails. This file must be available in the base path locati… |
| 1.3.6.1.4.1.5504.3.1.21.1.2.1.1.1.10 | ColumnrequiredCpeGenericConfigFile | read-create | current | A string defining the generic configuration filename for CPEs using this manager. The CPE must specify this filename to the CO device. If the names do not matc… |
| 1.3.6.1.4.1.5504.3.1.21.1.2.1.1.1.11 | ColumncpeLeaseTimeUpdate | read-create | current | The short lease time (in seconds) granted to a CPE during download of files. This value is also used for throttling a download storms. The default value for th… |
| 1.3.6.1.4.1.5504.3.1.21.1.2.1.1.1.12 | ColumncpeLeaseTimeOperational | read-create | current | The long lease time (in seconds) granted to a CPE if there is no upgrade required. The default for this value will be one day. This value should be short enoug… |
| 1.3.6.1.4.1.5504.3.1.21.1.2.1.1.1.13 | ColumncpeConfigMgrDwnldSrvrToUsed | read-create | current | Index of a cpeConfigMgrDownloadServerEntry containing the download server details this cpeConfigMgr passes to attached CPEs. This field must match an existing … |
| 1.3.6.1.4.1.5504.3.1.21.1.2.1.1.1.14 | ColumncpeConfigMgrDownloadBasePath | read-create | current | A string that specifies the directory path to the base location of configuration files on the download server for this cpeConfigMgr. This path location will co… |
| 1.3.6.1.4.1.5504.3.1.21.1.2.1.1.1.15 | ColumncpeConfigMgrDownloadSecureMode | read-create | current | The desired security mode to use for downloading files. It can be one of three values: 1 = do not use secure download methods (use ftp or tftp), 2 = use secure… |
| 1.3.6.1.4.1.5504.3.1.21.1.2.1.1.1.16 | ColumncpeConfigMgrTrapsEnabled | read-create | current | Enables or disables whether traps are sent from the CO device for events relating to this cpeConfigMgr. |
| 1.3.6.1.4.1.5504.3.1.21.1.2.1.1.1.17 | ColumncpeConfigScriptIndex | read-create | current | Index of the cpe-config-script profile used to provision CPEs associated with the manager. Note, the cpe-config-script profile may still be called a gpon-onu-o… |
| 1.3.6.1.4.1.5504.3.1.21.1.2.1.1.1.18 | ColumncpeConfigVarsIndex | read-create | current | Index of the cpe-config-vars profile used to provision CPEs associated with the manager. The cpe-config-vars profile defines variables and their values used by… |
| 1.3.6.1.4.1.5504.3.1.21.1.2.1.2 | TablecpeConfigMgrDownloadServerTable | not-accessible | current | Table defining download servers used by CPEs. |
| 1.3.6.1.4.1.5504.3.1.21.1.2.1.2.1 | RowcpeConfigMgrDownloadServerEntry | not-accessible | current | Entry defining a download server used by CPE Config Manager Member CPEs. |
| 1.3.6.1.4.1.5504.3.1.21.1.2.1.2.1.1 | ColumncpeCfgMgrDwnldSrvrRowStatus | read-create | current | RowStatus object used to create an instance in this table. |
| 1.3.6.1.4.1.5504.3.1.21.1.2.1.2.1.2 | ColumncpeCfgMgrDwnldSrvrIndex | read-create | current | Unique number used to identify this download server instance. This field is the table index. |
| 1.3.6.1.4.1.5504.3.1.21.1.2.1.2.1.3 | ColumncpeCfgMgrDwnldSrvrIP | read-create | current | The IP address of the server hosting update files available to CPEs. This server must support the file transfer methods required by the CPEs (ftp or sftp) for … |
| 1.3.6.1.4.1.5504.3.1.21.1.2.1.2.1.4 | ColumncpeCfgMgrDwnldSrvrUsername | read-create | current | Username the CPE uses when accessing files on the download server. |
| 1.3.6.1.4.1.5504.3.1.21.1.2.1.2.1.5 | ColumncpeCfgMgrDwnldSrvrPassword | read-create | current | Password the CPE uses when accessing files on the download server. |
| 1.3.6.1.4.1.5504.3.1.21.1.2.1.2.1.6 | ColumncpeCfgMgrDwnldSrvrDefault | read-create | current | Indicates this download server is used as the default download server when creating cpeConfigMgrEntry's. This is only used during config time, and not during r… |
| 1.3.6.1.4.1.5504.3.1.21.1.2.1.3 | TablecpeConfigMgrMemberTable | not-accessible | current | The cpeConfigMgrMemberTable associates configured cpe-mgr interfaces with defined cpeConfigMgrEntrys. It also provides a means to associate a unique configurat… |
| 1.3.6.1.4.1.5504.3.1.21.1.2.1.3.1 | RowcpeConfigMgrMemberEntry | not-accessible | current | One CPE associated with a defined CPE Configuration Manager. |
| 1.3.6.1.4.1.5504.3.1.21.1.2.1.3.1.1 | ColumncpeConfigMgrMemberRowStatus | read-create | current | The standard field for creating/destroying an entry via SNMP. |
| 1.3.6.1.4.1.5504.3.1.21.1.2.1.3.1.2 | ColumncpeConfigMgrGroupMembership | read-create | current | This is the cpeConfigMgrGroup from the cpeConfigMgr table indicating which group this CPE is a member. This field is required and must point to a valid cpeConf… |
| 1.3.6.1.4.1.5504.3.1.21.1.2.1.3.1.3 | ColumncpeSpecificConfigFile | read-create | current | A string defining the specific configuration filename for this CPE. The CPE must specify this filename to the CO device. If the names do not match exactly, the… |
| 1.3.6.1.4.1.5504.3.1.21.1.2.1.3.1.4 | ColumncpeSpecificDownloadPath | read-create | current | This field defines the path to CPE specific files. This path is a sub-path to cpeConfigMgrDownloadBasePath. This path is also used when checking the CPEs repor… |
| 1.3.6.1.4.1.5504.3.1.21.1.2.1.3.1.5 | ColumncpeConfigMgrMemberTrapsEnabled | read-create | current | Enables or disables whether traps are sent from the CO device for events relating to this cpeConfigMgrMember. |
| 1.3.6.1.4.1.5504.3.1.21.1.2.1.4 | TablecpeConfigMgrMemberStatusTable | not-accessible | current | Table of runtime details of CPE Config Manager Members. |
| 1.3.6.1.4.1.5504.3.1.21.1.2.1.4.1 | RowcpeConfigMgrMemberStatusEntry | not-accessible | current | Runtime details of one CPE Config Manager Member. |
| 1.3.6.1.4.1.5504.3.1.21.1.2.1.4.1.1 | ColumncpeConfigMgrMemberStatus | read-only | current | Status indication for the latest configuration of this CPE. Note, this field will change to �Not compared� each time any field in this profile or it�s pa… |
| 1.3.6.1.4.1.5504.3.1.21.1.2.1.4.1.2 | ColumncpeConfigMgrUsed | read-only | current | The index into the cpeConfigMgr table for the specific CPE Config Manager used. The cpeConfigMgr will be found based on matching the cpeCofnigMgrGroupMembershi… |
| 1.3.6.1.4.1.5504.3.1.21.1.2.1.4.1.3 | ColumnreportedCpeType | read-only | current | The cpeType value received from the attached CPE, used to compare against the value in cpeConfigMgrEntry.managedCpeType. |
| 1.3.6.1.4.1.5504.3.1.21.1.2.1.4.1.4 | ColumnreportedCpeSoftwareVersion | read-only | current | A string containing the software image version received from the CPE. If this string does not exactly match the value of requiredCpeSoftwareVersion, a software… |
| 1.3.6.1.4.1.5504.3.1.21.1.2.1.4.1.5 | ColumnreportedCpeWebUIVersion | read-only | current | A string containing the WebUI image version received from the CPE. If this string does not exactly match the value of requiredCpeWebUIVersion, a WebUI image up… |
| 1.3.6.1.4.1.5504.3.1.21.1.2.1.4.1.6 | ColumnreportedCpeConfigFilename | read-only | current | The filename of the configuration the CPE is currently running. This filename must exactly match the value of cpeSpecificConfigFile or requiredCpeGenericConfig… |
| 1.3.6.1.4.1.5504.3.1.21.1.2.1.4.1.7 | ColumnreportedCpeSerialNumber | read-only | current | A string containing the serial number reported by the CPE. |
| 1.3.6.1.4.1.5504.3.1.21.1.2.1.4.1.8 | ColumnreportedCpeRegistrationID | read-only | current | A string containing the registration ID reported by the CPE. |
| 1.3.6.1.4.1.5504.3.1.21.1.2.1.4.1.9 | ColumnreportedCpeFSAN | read-only | current | A string containing the FSAN value reported by the CPE. The FSAN is a string of ASCII decimal digits representing the vendor-specific portion of the onu serial… |
| 1.3.6.1.4.1.5504.3.1.21.1.2.1.4.1.10 | ColumnreportedCpeMacAddress | read-only | current | The MAC address used by the CPE on the cpe-mgr interface. |
| 1.3.6.1.4.1.5504.3.1.21.1.2.1.4.1.11 | ColumnreportedDwnldSrvrBasePath | read-only | current | The cpeConfigMgrDownloadBasePath the CPE last received and now reports back to the CO. |
| 1.3.6.1.4.1.5504.3.1.21.1.2.1.4.1.12 | ColumnreportedDwnldSrvrSpecificPath | read-only | current | The cpeSpecificDownloadPath the CPE last received and now reports back to the CO. |
| 1.3.6.1.4.1.5504.3.1.21.1.2.1.4.1.13 | ColumnreportedCpeState | read-only | current | CPE State as reported by the CPE itself. This may not be completely accurate due to errors detected on the CO side. For example, if the update of a CPE is thro… |
| 1.3.6.1.4.1.5504.3.1.21.1.2.2 | IdentitycpeConfigMgrConformance | current | CPE Configuration Manager Conformance. | |
| 1.3.6.1.4.1.5504.3.1.21.1.2.2.1 | IdentitycpeConfigMgrGroups | current | CPE Configuraiton Manager conformance groups. | |
| 1.3.6.1.4.1.5504.3.1.21.1.2.2.1.1 | GroupcpeConfigMgrObjectGroup | current | A common set of objects used to maintain software version and generic configuration for a specific type of a group member CPE. | |
| 1.3.6.1.4.1.5504.3.1.21.1.2.2.1.2 | GroupcpeConfigMgrDownloadServerGroup | current | Objects used to define a download server used by CPEs managed by CPE Configuration manager. | |
| 1.3.6.1.4.1.5504.3.1.21.1.2.2.1.3 | GroupcpeConfigMgrMemberObjectGroup | current | A unique set of objects connecting a CPE link to a CPE Config Manager, assigning a unique configuration to the CPE, and maintaining a configuration status. | |
| 1.3.6.1.4.1.5504.3.1.21.1.2.2.1.4 | GroupcpeConfigMgrNotificationsObjectGroup | current | Notifications for various cpeConfigMgr events and errors. | |
| 1.3.6.1.4.1.5504.3.1.21.1.2.2.2 | IdentitycpeConfigMgrCompliances | current | CPE Configuration Manager Compliances. | |
| 1.3.6.1.4.1.5504.3.1.21.1.2.2.2.1 | CompliancecpeConfigMgrCompliance | current | The compliance statement for managed entities supporting CPE Configuration Manager. | |
| 1.3.6.1.4.1.5504.3.1.21.1.3 | IdentitycpeConfigMgrClient | current | CPE Configuration Manager Client. | |
| 1.3.6.1.4.1.5504.3.1.21.1.3.0 | IdentitycpeCfgMgrClientNotifications | current | CPE Configuration Manager Client notifications. | |
| 1.3.6.1.4.1.5504.3.1.21.1.3.0.1 | NotificationcpeCfgMgrClientSoftwareDownloadFailed | current | Trap sent by a CPE when the download of the software image initiated by CPE Config Manager fails. | |
| 1.3.6.1.4.1.5504.3.1.21.1.3.0.2 | NotificationcpeCfgMgrClientSoftwareInstallFailed | current | Trap sent by a CPE when the installation of the software image as required by CPE Config Manager fails. | |
| 1.3.6.1.4.1.5504.3.1.21.1.3.0.3 | NotificationcpeCfgMgrClientWebUIDownloadFailed | current | Trap sent by a CPE when the download of the WebUI file initiated by CPE Config Manager fails. | |
| 1.3.6.1.4.1.5504.3.1.21.1.3.0.4 | NotificationcpeCfgMgrClientWebUIInstallFailed | current | Trap sent by a CPE when the installation of the WebUI file required by CPE Config Manager fails. | |
| 1.3.6.1.4.1.5504.3.1.21.1.3.0.5 | NotificationcpeCfgMgrClientConfigDownloadFailed | current | Trap sent by a CPE when the download of a configuration file initiated by CPE Config Manager fails. | |
| 1.3.6.1.4.1.5504.3.1.21.1.3.0.6 | NotificationcpeCfgMgrClientConfigUpdateFailed | current | Trap sent by a CPE when updating to a configuration file required by CPE Config Manager fails. | |
| 1.3.6.1.4.1.5504.3.1.21.1.3.0.7 | NotificationcpeCfgMgrClientConfigBackupFailed | current | Trap sent by a CPE when the upload of a configuration file initiated by CPE Config Manager fails. | |
| 1.3.6.1.4.1.5504.3.1.21.1.3.0.8 | NotificationcpeCfgMgrClientLevelReady | current | Trap sent by a CPE reporting its configuration level after it has completed all updates available from CPE Config Manager. | |
| 1.3.6.1.4.1.5504.3.1.21.1.3.0.9 | NotificationcpeCfgMgrClientConfigBackupDone | current | Trap sent by a CPE when the upload of a configuration file initiated by CPE Config Manager completes successfully. | |
| 1.3.6.1.4.1.5504.3.1.21.1.3.1 | IdentitycpeCfgMgrClientObjects | current | CPE Configuration Manager Client Objects. | |
| 1.3.6.1.4.1.5504.3.1.21.1.3.1.1 | IdentitycpeCfgMgrClientIdObjects | current | CPE Configuration Manager Client Identity Objects. | |
| 1.3.6.1.4.1.5504.3.1.21.1.3.1.1.1 | ScalarcpeCfgMgrClientSerialNumber | read-only | current | The serial number of this CPE. |
| 1.3.6.1.4.1.5504.3.1.21.1.3.1.1.2 | ScalarcpeCfgMgrClientRegistrationID | read-only | current | The registration ID of this CPE. |
| 1.3.6.1.4.1.5504.3.1.21.1.3.1.1.3 | ScalarcpeCfgMgrClientFSAN | read-only | current | A string containing the FSAN value of this CPE. The FSAN is a string of ASCII decimal digits representing the vendor-specific portion of the onu serial number … |
| 1.3.6.1.4.1.5504.3.1.21.1.3.1.1.4 | ScalarcpeCfgMgrClientMacAddress | read-only | current | The MAC address used by this CPE on the cpe-mgr interface. |
| 1.3.6.1.4.1.5504.3.1.21.1.3.1.1.5 | ScalarcpeCfgMgrClientSysName | read-only | current | Read only access to the sysName of this CPE. |
| 1.3.6.1.4.1.5504.3.1.21.1.3.1.2 | IdentitycpeCfgMgrClientStatusObjects | current | CPE Configuration Manager Client Status Objects. | |
| 1.3.6.1.4.1.5504.3.1.21.1.3.1.2.1 | ScalarcpeCfgMgrClientState | read-only | current | Current status of CPE Config Manager operations on this CPE. |
| 1.3.6.1.4.1.5504.3.1.21.1.3.1.2.2 | ScalarcpeCfgMgrClientErrorDescription | read-only | current | Textual description of the most recent error that may have occurred while downloading a file, upgrading the software, updating the configuration, or backing up… |
| 1.3.6.1.4.1.5504.3.1.21.1.3.1.2.3 | ScalarcpeCfgMgrClientCurrentSwVersion | read-only | current | A text string containing the currently running software image version. This string is reported to the CO via DHCP for CPE Config Manager support. |
| 1.3.6.1.4.1.5504.3.1.21.1.3.1.2.4 | ScalarcpeCfgMgrClientCurrentWebUIVersion | read-only | current | A text string containing the currently installed WebUI version. This string is reported to the CO via DHCP for CPE Config Manager support. |
| 1.3.6.1.4.1.5504.3.1.21.1.3.1.2.5 | ScalarcpeCfgMgrClientLastInstalledConfigFile | read-only | current | A text string containing the configuration filename most recently installed by CPE Config Manager. This string is reported to the CO via DHCP for CPE Config Ma… |
| 1.3.6.1.4.1.5504.3.1.21.1.3.1.2.6 | ScalarcpeCfgMgrClientLastDwnldSrvrBasePath | read-only | current | A text string containing the download server base path most recently used for uploading or downloading files for CPE Config Manager. This string is reported to… |
| 1.3.6.1.4.1.5504.3.1.21.1.3.1.2.7 | ScalarcpeCfgMgrClientLastDwnldSrvrSpecificPath | read-only | current | A text string containing the download server specific path most recently used for uploading or downloading files for CPE Config Manager. This string is reporte… |
| 1.3.6.1.4.1.5504.3.1.21.1.3.1.3 | IdentitycpeCfgMgrClientUpdateObjects | current | CPE Configuration Manager Client Update Objects. | |
| 1.3.6.1.4.1.5504.3.1.21.1.3.1.3.1 | ScalarcpeCfgMgrClientRequiredUpdates | read-write | current | This field indicates the current list of required updates this CPE needs to complete. The 'backup' bit tells the CPE to generate a config backup of the running… |
| 1.3.6.1.4.1.5504.3.1.21.1.3.1.3.2 | ScalarcpeCfgMgrClientReceivedSwFilename | read-write | current | A string specifying the software filename the CPE must download. The CPE will be required to download this file when the reportedCpeSoftwareVersion it reported… |
| 1.3.6.1.4.1.5504.3.1.21.1.3.1.3.3 | ScalarcpeCfgMgrClientReceivedWebUIFilename | read-write | current | A string specifying the WebUI filename the CPE must download. The CPE will be required to download this file when the reportedCpeWebUIVersion it reported to th… |
| 1.3.6.1.4.1.5504.3.1.21.1.3.1.3.4 | ScalarcpeCfgMgrClientReceivedGenericCfgFilename | read-write | current | A string specifying the generic config filename for this CPE. The CPE must download this file if the reportedCpeConfigFilename it reported to the CO device doe… |
| 1.3.6.1.4.1.5504.3.1.21.1.3.1.3.5 | ScalarcpeCfgMgrClientReceivedSpecificCfgFilename | read-write | current | A string specifying the specific config filename for this CPE. The CPE must download this file if the reportedCpeConfigFilename it reported to the CO device do… |
| 1.3.6.1.4.1.5504.3.1.21.1.3.1.3.6 | ScalarcpeCfgMgrClientForceUpdate | read-write | current | Writable object causing the immediate update of the CPE. After initiating the requested update, this field reverts to the 'none' state. renewDhcp - Simply rest… |
| 1.3.6.1.4.1.5504.3.1.21.1.3.1.4 | IdentitycpeCfgMgrClientDownloadServerObjects | current | CPE Configuration Manager Download Server Objects. | |
| 1.3.6.1.4.1.5504.3.1.21.1.3.1.4.1 | ScalarcpeCfgMgrClientDwnldSrvrIP | read-write | current | The IP address of the server hosting files for download by CPEs. This will likely be the ZMS server. |
| 1.3.6.1.4.1.5504.3.1.21.1.3.1.4.2 | ScalarcpeCfgMgrClientDwnldSrvrUsername | read-write | current | Username the CPE uses when downloading files from the download server. |
| 1.3.6.1.4.1.5504.3.1.21.1.3.1.4.3 | ScalarcpeCfgMgrClientDwnldSrvrPassword | read-write | current | Password the CPE uses when downloading files from the download server. |
| 1.3.6.1.4.1.5504.3.1.21.1.3.1.4.4 | ScalarcpeCfgMgrClientDwnldSrvrSecureMode | read-write | current | The desired security mode to use for downloading files. It can be one of three values: 1 = do not use secure download methods (use ftp or tftp), 2 = use secure… |
| 1.3.6.1.4.1.5504.3.1.21.1.3.1.4.5 | ScalarcpeCfgMgrClientDwnldSrvrBasePath | read-write | current | The base path location on the download server where update files are available. |
| 1.3.6.1.4.1.5504.3.1.21.1.3.1.4.6 | ScalarcpeCfgMgrClientDwnldSpecificPath | read-write | current | The specific path location on the download server where CPE specific files are available. This path is a sub-path of the base path. The total path is a concate… |
| 1.3.6.1.4.1.5504.3.1.21.1.3.1.5 | IdentitycpeCfgMgrClientCoObjects | current | CPE Configuration Manager Client CO Objects. | |
| 1.3.6.1.4.1.5504.3.1.21.1.3.1.5.1 | ScalarcpeCfgMgrPublicIPAddress | read-write | current | This is the Public side IP Address used by CPE Config Manager on the CO device. It is not necessarily the IP used by the CO to communicate with the CPE. |
| 1.3.6.1.4.1.5504.3.1.21.1.3.1.5.2 | ScalarcpeCfgMgrBaseProtocolPort | read-write | current | Base protocol port used for NAT/PAT access of this CPE via the CO device. |
| 1.3.6.1.4.1.5504.3.1.21.1.3.1.5.3 | ScalarcpeCfgMgrSlot | read-write | current | Slot identifier for the port on the CO device connected to this CPE. |
| 1.3.6.1.4.1.5504.3.1.21.1.3.1.5.4 | ScalarcpeCfgMgrPort | read-write | current | Port identifier on the CO device slot connected to this CPE. |
| 1.3.6.1.4.1.5504.3.1.21.1.3.1.5.5 | ScalarcpeCfgMgrSubport | read-write | current | Subport identifier on the CO device's port connected to this CPE. |
| 1.3.6.1.4.1.5504.3.1.21.1.3.1.5.6 | ScalarcpeCfgMgrInterfaceName | read-write | current | Interface name on the CO device connected to this CPE. |
| 1.3.6.1.4.1.5504.3.1.21.1.3.2 | IdentitycpeCfgMgrClientConformance | current | CPE Configuration Manager Client Conformance. | |
| 1.3.6.1.4.1.5504.3.1.21.1.3.2.1 | IdentitycpeCfgMgrClientGroups | current | CPE Configuration Manager Client conformance groups. | |
| 1.3.6.1.4.1.5504.3.1.21.1.3.2.1.1 | GroupcpeCfgMgrClientObjectGroup | current | These objects are required for CPEs supporting CPE Configuration Manager controls. | |
| 1.3.6.1.4.1.5504.3.1.21.1.3.2.1.2 | GroupcpeCfgMgrClientNotificationsGroup | current | Notifications from a CPE being managed by CPE Config manager. | |
| 1.3.6.1.4.1.5504.3.1.21.1.3.2.2 | IdentitycpeCfgMgrClientCompliances | current | CPE Configuration Manager Client compliances. | |
| 1.3.6.1.4.1.5504.3.1.21.1.3.2.2.1 | CompliancecpeCfgMgrClientCompliance | current | CPE Config Compliance. |