CPQFCA-MIB
322 objects
No module-level DESCRIPTION found.
Imported Objects
| CPQHOST-MIB | compaq cpqHoTrapFlags |
| CPQSTSYS-MIB | cpqSsChassisName cpqSsChassisTime |
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter enterprises Gauge |
| RFC1213-MIB | DisplayString sysName |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.232.16 | NodecpqFibreArray | |||
| 1.3.6.1.4.1.232.16.1 | NodecpqFcaMibRev | |||
| 1.3.6.1.4.1.232.16.1.1 | ScalarcpqFcaMibRevMajor | read-only | mandatory | The Major Revision level. A change in the major revision level represents a major change in the architecture of the MIB. A change in the major revision level m… |
| 1.3.6.1.4.1.232.16.1.2 | ScalarcpqFcaMibRevMinor | read-only | mandatory | The Minor Revision level. A change in the minor revision level may represent some minor additional support, no changes to any pre-existing information has occu… |
| 1.3.6.1.4.1.232.16.1.3 | ScalarcpqFcaMibCondition | read-only | mandatory | The overall condition (status) of the system represented by this MIB. |
| 1.3.6.1.4.1.232.16.2 | NodecpqFcaComponent | |||
| 1.3.6.1.4.1.232.16.2.1 | NodecpqFcaInterface | |||
| 1.3.6.1.4.1.232.16.2.1.4 | NodecpqFcaOsCommon | |||
| 1.3.6.1.4.1.232.16.2.1.4.1 | ScalarcpqFcaOsCommonPollFreq | read-write | mandatory | The Insight Agent`s polling frequency. The frequency, in seconds, at which the Insight Agent requests information from the device driver. A frequency of zero (… |
| 1.3.6.1.4.1.232.16.2.1.4.2 | TablecpqFcaOsCommonModuleTable | not-accessible | deprecated | A table of software modules that provide an interface to the device this MIB describes. |
| 1.3.6.1.4.1.232.16.2.1.4.2.1 | RowcpqFcaOsCommonModuleEntry | not-accessible | deprecated | A description of a software module that provides an interface to the device this MIB describes. |
| 1.3.6.1.4.1.232.16.2.1.4.2.1.1 | ColumncpqFcaOsCommonModuleIndex | read-only | deprecated | A unique index for this module description. |
| 1.3.6.1.4.1.232.16.2.1.4.2.1.2 | ColumncpqFcaOsCommonModuleName | read-only | deprecated | The module name. |
| 1.3.6.1.4.1.232.16.2.1.4.2.1.3 | ColumncpqFcaOsCommonModuleVersion | read-only | deprecated | The module version in XX.YY format. Where XX is the major version number and YY is the minor version number. This field will be a null (size 0) string if the a… |
| 1.3.6.1.4.1.232.16.2.1.4.2.1.4 | ColumncpqFcaOsCommonModuleDate | read-only | deprecated | The module date. field octets contents range ===== ====== ======= ===== 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minute 0..59 6 7 s… |
| 1.3.6.1.4.1.232.16.2.1.4.2.1.5 | ColumncpqFcaOsCommonModulePurpose | read-only | deprecated | The purpose of the module described in this entry. |
| 1.3.6.1.4.1.232.16.2.2 | NodecpqFcaCntlr | |||
| 1.3.6.1.4.1.232.16.2.2.1 | TablecpqFcaCntlrTable | not-accessible | mandatory | External Array Controller Table. |
| 1.3.6.1.4.1.232.16.2.2.1.1 | RowcpqFcaCntlrEntry | not-accessible | mandatory | Array Controller Entry. |
| 1.3.6.1.4.1.232.16.2.2.1.1.1 | ColumncpqFcaCntlrBoxIndex | read-only | mandatory | External Array Controller Storage Box Index. The storage box index indicates which storage box this controller is in. |
| 1.3.6.1.4.1.232.16.2.2.1.1.2 | ColumncpqFcaCntlrBoxIoSlot | read-only | mandatory | External Array Controller Box I/O Slot. This identifies the physical I/O slot where this controller resides in the storage box. |
| 1.3.6.1.4.1.232.16.2.2.1.1.3 | ColumncpqFcaCntlrModel | read-only | mandatory | External Array Controller Model. The type of controller card. The valid types are: Other (1) You may need to upgrade your driver software and\or instrument age… |
| 1.3.6.1.4.1.232.16.2.2.1.1.4 | ColumncpqFcaCntlrFWRev | read-only | mandatory | External Array Controller Firmware Revision. This value can be used to help identify a particular revision of the controller. |
| 1.3.6.1.4.1.232.16.2.2.1.1.5 | ColumncpqFcaCntlrStatus | read-only | mandatory | External Array Controller Status. This value represents the status of the External Array Controller. The following values are valid: other (1) Indicates that t… |
| 1.3.6.1.4.1.232.16.2.2.1.1.6 | ColumncpqFcaCntlrCondition | read-only | mandatory | External Array Controller Condition. This value represents the overall condition of this controller and any array accelerators. |
| 1.3.6.1.4.1.232.16.2.2.1.1.7 | ColumncpqFcaCntlrProductRev | read-only | mandatory | External Array Controller Product Revision. The Product Revision of the controller. This value can be used to further identify a particular revision of the con… |
| 1.3.6.1.4.1.232.16.2.2.1.1.8 | ColumncpqFcaCntlrWorldWideName | read-only | mandatory | External Array Controller World Wide Port Name. This value can be used to further identify a particular controller. If the world wide port name is not supporte… |
| 1.3.6.1.4.1.232.16.2.2.1.1.9 | ColumncpqFcaCntlrSerialNumber | read-only | mandatory | External Array Controller Serial Number. This value can be used to further identify a particular controller. If the serial number is not supported, the agent w… |
| 1.3.6.1.4.1.232.16.2.2.1.1.10 | ColumncpqFcaCntlrCurrentRole | read-only | mandatory | External Array Controller Current Role. For duplexed controllers, this is the controllers current role. The following values are valid: other (1) Indicates tha… |
| 1.3.6.1.4.1.232.16.2.2.1.1.11 | ColumncpqFcaCntlrRedundancyType | read-only | mandatory | External Array Controller Redundancy Type. The following values are valid: other (1) Indicates that the instrument agent does not recognize the redundancy type… |
| 1.3.6.1.4.1.232.16.2.2.1.1.12 | ColumncpqFcaCntlrRedundancyError | read-only | mandatory | External Array Controller Redundancy Error. The following values are valid: other (1) Indicates that the instrument agent does not recognize the redundancy err… |
| 1.3.6.1.4.1.232.16.2.2.1.1.13 | ColumncpqFcaCntlrBlinkTime | read-write | mandatory | External Array Controller Physical Drive Blink Time Count. The controller blink time variable allows the drive tray LEDs of all physical drives attached to thi… |
| 1.3.6.1.4.1.232.16.2.2.1.1.14 | ColumncpqFcaCntlrWorldWideNodeName | read-only | mandatory | External Array Controller World Wide Node Name. This value can be used to further identify a particular controller. If the world wide name is not supported, th… |
| 1.3.6.1.4.1.232.16.2.2.1.1.15 | ColumncpqFcaCntlrRebuildPriority | read-only | mandatory | Array Controller Rebuild Priority. This is the controller`s rebuild priority. The following values are valid: other (1) Indicates that the agent does not recog… |
| 1.3.6.1.4.1.232.16.2.2.1.1.16 | ColumncpqFcaCntlrExpandPriority | read-only | mandatory | Array Controller Expand Priority. This is the controller`s expand priority. The following values are valid: other (1) Indicates that the agent does not recogni… |
| 1.3.6.1.4.1.232.16.2.2.2 | TablecpqFcaAccelTable | not-accessible | mandatory | Array Accelerator Board Table. |
| 1.3.6.1.4.1.232.16.2.2.2.1 | RowcpqFcaAccelEntry | not-accessible | mandatory | Array Accelerator Board Entry. |
| 1.3.6.1.4.1.232.16.2.2.2.1.1 | ColumncpqFcaAccelBoxIndex | read-only | mandatory | External Array Controller Storage Box Index. The storage box index indicates which storage box this accelerator is in. |
| 1.3.6.1.4.1.232.16.2.2.2.1.2 | ColumncpqFcaAccelBoxIoSlot | read-only | mandatory | External Array Controller Box I/O Slot. This identifies the physical I/O slot where this accelerator resides in the storage box. |
| 1.3.6.1.4.1.232.16.2.2.2.1.3 | ColumncpqFcaAccelStatus | read-only | mandatory | Array Accelerator Board Status. This describes the status of the Array Accelerator Cache. The status can be: Other (1) Indicates that the instrument agent does… |
| 1.3.6.1.4.1.232.16.2.2.2.1.4 | ColumncpqFcaAccelBadData | read-only | mandatory | Array Accelerator Board Bad Data. The following values are valid: None (2) Indicates that no data loss occurred. The battery packs were properly charged when t… |
| 1.3.6.1.4.1.232.16.2.2.2.1.5 | ColumncpqFcaAccelErrCode | read-only | mandatory | Array Accelerator Board Error Code. Use this to determine the status of the write cache operations. The status can be: Other (1) Indicates that the instrument … |
| 1.3.6.1.4.1.232.16.2.2.2.1.6 | ColumncpqFcaAccelBatteryStatus | read-only | mandatory | Array Accelerator Board Battery Status. This monitors the status of each battery pack on the board. The batteries can only recharge when the system has power a… |
| 1.3.6.1.4.1.232.16.2.2.2.1.7 | ColumncpqFcaAccelReadErrs | read-only | mandatory | Array Accelerator Board Read Errors. This shows the total number of read memory parity errors that were detected while reading from the Array Accelerator board… |
| 1.3.6.1.4.1.232.16.2.2.2.1.8 | ColumncpqFcaAccelWriteErrs | read-only | mandatory | Array Accelerator Board Write Errors. This shows the total number of write memory parity errors that were detected while writing to the Array Accelerator board… |
| 1.3.6.1.4.1.232.16.2.2.2.1.9 | ColumncpqFcaAccelCondition | read-only | mandatory | The condition of the device. This value represents the overall condition of this array accelerator. |
| 1.3.6.1.4.1.232.16.2.2.2.1.10 | ColumncpqFcaAccelWriteCache | read-only | mandatory | Write Cache Memory. This shows the amount of memory allocated for the write cache in megabytes. Because data is kept in duplicate (mirrored), the actual amount… |
| 1.3.6.1.4.1.232.16.2.2.2.1.11 | ColumncpqFcaAccelReadCache | read-only | mandatory | Read Cache Memory. This shows the amount of memory allocated for the read cache in megabytes. |
| 1.3.6.1.4.1.232.16.2.2.2.1.12 | ColumncpqFcaAccelSerialNumber | read-only | mandatory | Array Accelerator Board Serial Number. This value can be used to further identify the cache controller. If the serial number is not supported, the agent will r… |
| 1.3.6.1.4.1.232.16.2.2.2.1.13 | ColumncpqFcaAccelTotalMemory | read-only | mandatory | Array Accelerator Total Memory. This value is the total amount of accelerator memory in megabytes, including both battery-backed and non-battery-backed memory. |
| 1.3.6.1.4.1.232.16.2.2.2.1.14 | ColumncpqFcaAccelFailedBatteries | read-only | mandatory | Array Accelerator Failed Batteries. This lists the location of accelerator failed batteries. Each octet present contains the position number of a failed batter… |
| 1.3.6.1.4.1.232.16.2.3 | NodecpqFcaLogDrv | |||
| 1.3.6.1.4.1.232.16.2.3.1 | TablecpqFcaLogDrvTable | not-accessible | mandatory | External Array Logical Drive Table. A table of logical drive entries. |
| 1.3.6.1.4.1.232.16.2.3.1.1 | RowcpqFcaLogDrvEntry | not-accessible | mandatory | External Array Logical Drive Entry. A logical drive entry. |
| 1.3.6.1.4.1.232.16.2.3.1.1.1 | ColumncpqFcaLogDrvBoxIndex | read-only | mandatory | External Array Logical Drive Storage Box Index. The storage box index indicates which storage box this logical drive is in. |
| 1.3.6.1.4.1.232.16.2.3.1.1.2 | ColumncpqFcaLogDrvIndex | read-only | mandatory | External Array Logical Drive Index. This logical drive number keeps track of multiple instances of logical drives which are in the same storage box. For each s… |
| 1.3.6.1.4.1.232.16.2.3.1.1.3 | ColumncpqFcaLogDrvFaultTol | read-only | mandatory | Logical Drive Fault Tolerance. This shows the fault tolerance mode of the logical drive. To change the fault tolerance mode, run the configuration utility. The… |
| 1.3.6.1.4.1.232.16.2.3.1.1.4 | ColumncpqFcaLogDrvStatus | read-only | mandatory | Logical Drive Status. The logical drive can be in one of the following states: Ok (2) Indicates that the logical drive is in normal operation mode. Failed (3) … |
| 1.3.6.1.4.1.232.16.2.3.1.1.5 | ColumncpqFcaLogDrvAutoRel | read-only | mandatory | Logical Drive Auto-Reliability Delay. This value indicates how many seconds the logical drive will wait with no requests before beginning Auto-Reliability moni… |
| 1.3.6.1.4.1.232.16.2.3.1.1.6 | ColumncpqFcaLogDrvPercentRebuild | read-only | mandatory | Logical Drive Percent Rebuild. After a failed physical drive has been replaced, the physical drive must have its data rebuilt. This value the percent complete … |
| 1.3.6.1.4.1.232.16.2.3.1.1.7 | ColumncpqFcaLogDrvHasAccel | read-only | mandatory | Logical Drive Has Array Accelerator Board. This indicates whether the logical drive has an Array Accelerator board configured and enabled. The following values… |
| 1.3.6.1.4.1.232.16.2.3.1.1.8 | ColumncpqFcaLogDrvAvailSpares | read-only | mandatory | External Array Logical Drive Available Spares. This indicates if this logical drive has one or more spares designated for it that are not currently in use by a… |
| 1.3.6.1.4.1.232.16.2.3.1.1.9 | ColumncpqFcaLogDrvSize | read-only | mandatory | External Array Logical Drive Size. This is the size of the logical drive in megabytes. This value is calculated using the value 1,048,576 (2^20) as a megabyte.… |
| 1.3.6.1.4.1.232.16.2.3.1.1.10 | ColumncpqFcaLogDrvPhyDrvIDs | read-only | mandatory | External Array Logical Drive Physical Drive IDs. This lists the physical drive IDs which are associated with this logical drive. These are the same IDs which c… |
| 1.3.6.1.4.1.232.16.2.3.1.1.11 | ColumncpqFcaLogDrvCondition | read-only | mandatory | The Logical Drive condition. This value represents the overall condition of this logical drive and any associated physical drives. |
| 1.3.6.1.4.1.232.16.2.3.1.1.12 | ColumncpqFcaLogDrvStripeSize | read-only | mandatory | External Array Logical Drive Stripe Size. This is the size of a logical drive stripe in kilobytes. |
| 1.3.6.1.4.1.232.16.2.3.1.1.13 | ColumncpqFcaLogDrvOsName | read-only | mandatory | External Array Logical Drive OS Name. The OS name for this array logical drive. This field will be a null (size 0) string if the agent does not support OS name. |
| 1.3.6.1.4.1.232.16.2.3.1.1.14 | ColumncpqFcaLogDrvBlinkTime | read-write | mandatory | External Array Logical Drive Physical Drive Blink Time Count. The logical drive blink time variable allows the drive tray LEDs of all physical drives in a logi… |
| 1.3.6.1.4.1.232.16.2.3.1.1.15 | ColumncpqFcaLogDrvSpareReplaceMap | read-only | mandatory | External Array Logical Drive Spare To Replacement Drive Map. This data structure contains the spare to physical drive replacement map. The format is: octet con… |
| 1.3.6.1.4.1.232.16.2.3.1.1.16 | ColumncpqFcaLogDrvRebuildingPhyDrv | read-only | mandatory | External Array Logical Drive Physical Drive Rebuilding Index. This is the physical drive index of the physical drive that is currently rebuilding. If the value… |
| 1.3.6.1.4.1.232.16.2.3.1.1.17 | ColumncpqFcaLogDrvSnapshotResourceDrvIndex | read-only | mandatory | External Array Logical Drive Snapshot Resource Drive Index. This is the logical drive index of the Snapshot Resource Volume associated with this logical drive.… |
| 1.3.6.1.4.1.232.16.2.3.1.1.18 | ColumncpqFcaLogDrvSnapshotSourceDrvIndex | read-only | mandatory | External Array Logical Drive Snapshot Source Drive Index. This is the drive index of the source logical drive associated with this Snapshot Resource Volume. If… |
| 1.3.6.1.4.1.232.16.2.3.1.1.19 | ColumncpqFcaLogDrvPreferredPath | read-only | mandatory | External Array Logical Drive Preferred Path. This identifies the preferred controller path to this logical drive in a redundant active/active configuration. Th… |
| 1.3.6.1.4.1.232.16.2.3.1.1.20 | ColumncpqFcaLogDrvCurrentPath | read-only | mandatory | External Array Logical Drive Current Path. This identifies the current controller path to this logical drive in a redundant active/active configuration. The va… |
| 1.3.6.1.4.1.232.16.2.4 | NodecpqFcaSpareDrv | |||
| 1.3.6.1.4.1.232.16.2.4.1 | TablecpqFcaSpareTable | not-accessible | mandatory | External Array Spare Table. A table of spare entries. |
| 1.3.6.1.4.1.232.16.2.4.1.1 | RowcpqFcaSpareEntry | not-accessible | mandatory | External Array Spare Entry. An entry in the spare table. |
| 1.3.6.1.4.1.232.16.2.4.1.1.1 | ColumncpqFcaSpareBoxIndex | read-only | mandatory | External Array Spare Drive Storage Box Index. The storage box index indicates which storage box this spare drive is in. |
| 1.3.6.1.4.1.232.16.2.4.1.1.2 | ColumncpqFcaSparePhyDrvIndex | read-only | mandatory | External Array Spare Physical Drive Index. This index maps the spare to the physical drive it represents. The value of this index is the same as the one used w… |
| 1.3.6.1.4.1.232.16.2.4.1.1.3 | ColumncpqFcaSpareStatus | read-only | mandatory | Spare Status. This shows the status of the on-line spare drive. The following values are valid for the spare status: Inactive (2) The monitored system has an o… |
| 1.3.6.1.4.1.232.16.2.4.1.1.4 | ColumncpqFcaSpareReplacedDrvBay | read-only | mandatory | Spare Replaced Drive Bay. If the spare status is active(6) or building(5), then this has the physical drive bay number of the replaced drive. If the value cann… |
| 1.3.6.1.4.1.232.16.2.4.1.1.5 | ColumncpqFcaSparePercentRebuild | read-only | mandatory | External Array Spare Percent Rebuild. If the spare status is building(5), then this is percent complete of of the rebuild. The data contained on the failed phy… |
| 1.3.6.1.4.1.232.16.2.4.1.1.6 | ColumncpqFcaSpareCondition | read-only | mandatory | The Spare Drive condition. This value represents the overall condition of this spare drive and any associated physical drives. |
| 1.3.6.1.4.1.232.16.2.4.1.1.7 | ColumncpqFcaSpareBusNumber | read-only | mandatory | Spare Drive SCSI Bus Number. The bus number indicates to which SCSI bus this spare drive is attached. The first instance is one and increments for each SCSI bu… |
| 1.3.6.1.4.1.232.16.2.4.1.1.8 | ColumncpqFcaSpareBay | read-only | mandatory | External Array Spare Drive Bay Location. This value matches the bay location where the physical drive has been installed. Each bay is labeled with a separate n… |
| 1.3.6.1.4.1.232.16.2.4.1.1.9 | ColumncpqFcaSpareReplacedDrvBusNumber | read-only | mandatory | Spare Replaced Drive Bus Number. If the spare status is active(6) or building(5), then this has the physical drive bus number of the replaced drive. If the val… |
| 1.3.6.1.4.1.232.16.2.4.1.1.10 | ColumncpqFcaSpareLocationString | read-only | mandatory | Spare Drive Location String. This string describes the location of the drive in relation to the storage box. If the location string cannot be determined, the a… |
| 1.3.6.1.4.1.232.16.2.5 | NodecpqFcaPhyDrv | |||
| 1.3.6.1.4.1.232.16.2.5.1 | TablecpqFcaPhyDrvTable | not-accessible | mandatory | External Array Physical Drive Table. A table of physical drive entries. |
| 1.3.6.1.4.1.232.16.2.5.1.1 | RowcpqFcaPhyDrvEntry | not-accessible | mandatory | External Array Physical Drive Entry. A physical drive entry. |
| 1.3.6.1.4.1.232.16.2.5.1.1.1 | ColumncpqFcaPhyDrvBoxIndex | read-only | mandatory | External Array Physical Drive Storage Box Index. The storage box index indicates which storage box this physical drive is in. |
| 1.3.6.1.4.1.232.16.2.5.1.1.2 | ColumncpqFcaPhyDrvIndex | read-only | mandatory | External Array Physical Drive Index. This index is used for selecting the physical drive table entry. This number, along with the cpqFcaPhyDrvBoxIndex uniquely… |
| 1.3.6.1.4.1.232.16.2.5.1.1.3 | ColumncpqFcaPhyDrvModel | read-only | mandatory | External Array Physical Drive Model. This is a text description of the physical drive. The text that appears depends upon who manufactured the drive and the dr… |
| 1.3.6.1.4.1.232.16.2.5.1.1.4 | ColumncpqFcaPhyDrvFWRev | read-only | mandatory | External Array Physical Drive Firmware Revision. This shows the physical drive firmware revision number. |
| 1.3.6.1.4.1.232.16.2.5.1.1.5 | ColumncpqFcaPhyDrvBay | read-only | mandatory | External Array Physical Drive Bay Location. This value matches the bay location where the physical drive has been installed. Each bay is labeled with a separat… |
| 1.3.6.1.4.1.232.16.2.5.1.1.6 | ColumncpqFcaPhyDrvStatus | read-only | mandatory | External Array Physical Drive Status. This shows the status of the physical drive. The following values are valid for the physical drive status: other (1) Indi… |
| 1.3.6.1.4.1.232.16.2.5.1.1.7 | ColumncpqFcaPhyDrvUsedReallocs | read-only | mandatory | External Array Physical Drive Used Reallocated Sectors. This shows the number of sectors of the reallocation area that have been used by the physical drive. To… |
| 1.3.6.1.4.1.232.16.2.5.1.1.8 | ColumncpqFcaPhyDrvRefHours | read-only | mandatory | External Array Reference Time in hours. This shows the total number of hours that a physical drive has been spinning since the drive was stamped. The drive wil… |
| 1.3.6.1.4.1.232.16.2.5.1.1.9 | ColumncpqFcaPhyDrvHReads | read-only | mandatory | External Array Physical Drive Sectors Read (high). The phyDrvHReads and the phyDrvReads together shows the total number of sectors read from the physical disk … |
| 1.3.6.1.4.1.232.16.2.5.1.1.10 | ColumncpqFcaPhyDrvReads | read-only | mandatory | External Array Physical Drive Sectors Read (low). The phyDrvHReads and the phyDrvReads together shows the total number of sectors read from the physical disk d… |
| 1.3.6.1.4.1.232.16.2.5.1.1.11 | ColumncpqFcaPhyDrvHWrites | read-only | mandatory | Sectors Written (high). The phyDrvHWrites and the phyDrvWrites together shows the total number of sectors written to the physical disk drive during the referen… |
| 1.3.6.1.4.1.232.16.2.5.1.1.12 | ColumncpqFcaPhyDrvWrites | read-only | mandatory | Sectors Written (low). The phyDrvHWrites and the phyDrvWrites together shows the total number of sectors written to the physical disk drive during the referenc… |
| 1.3.6.1.4.1.232.16.2.5.1.1.13 | ColumncpqFcaPhyDrvHSeeks | read-only | mandatory | Total Seeks (high). The phyDrvHSeeks and the phyDrvSeeks together shows the total number of seek operations performed by the physical disk drive during the ref… |
| 1.3.6.1.4.1.232.16.2.5.1.1.14 | ColumncpqFcaPhyDrvSeeks | read-only | mandatory | Total Seeks (low). The phyDrvHSeeks and the phyDrvSeeks together shows the total number of seek operations performed by the physical disk drive during the refe… |
| 1.3.6.1.4.1.232.16.2.5.1.1.15 | ColumncpqFcaPhyDrvHardReadErrs | read-only | mandatory | Hard Read Errors. This shows the number of read errors that have occurred on a drive that could not be recovered by a physical drive`s Error Correction Code (E… |
| 1.3.6.1.4.1.232.16.2.5.1.1.16 | ColumncpqFcaPhyDrvRecvReadErrs | read-only | mandatory | Recovered Read Errors. This shows the number of read errors corrected through physical drive retries during the reference time (phyDrvRefTime). Over time, all … |
| 1.3.6.1.4.1.232.16.2.5.1.1.17 | ColumncpqFcaPhyDrvHardWriteErrs | read-only | mandatory | Hard Write Errors. This shows the number of write errors that could not be recovered by a physical drive during the reference time (phyDrvRefTime). Over time a… |
| 1.3.6.1.4.1.232.16.2.5.1.1.18 | ColumncpqFcaPhyDrvRecvWriteErrs | read-only | mandatory | Recovered Write Errors. This shows the number of write errors corrected through physical drive retries or recovered by a physical drive during the reference ti… |
| 1.3.6.1.4.1.232.16.2.5.1.1.19 | ColumncpqFcaPhyDrvHSeekErrs | read-only | mandatory | Seek Errors (High). The phyDrvHSeekErrs and the phyDrvSeekErrs together shows the total number of times that the physical disk drive detected a seek error duri… |
| 1.3.6.1.4.1.232.16.2.5.1.1.20 | ColumncpqFcaPhyDrvSeekErrs | read-only | mandatory | Seek Errors (low). The phyDrvHSeekErrs and the phyDrvSeekErrs together shows the total number of times that the physical disk drive detected a seek error durin… |
| 1.3.6.1.4.1.232.16.2.5.1.1.21 | ColumncpqFcaPhyDrvSpinupTime | read-only | mandatory | Spin up Time in tenths of seconds. This is the time it takes for a physical drive to spin up to full speed. Disks require time to gain momentum and reach opera… |
| 1.3.6.1.4.1.232.16.2.5.1.1.22 | ColumncpqFcaPhyDrvFunctTest1 | read-only | deprecated | Functional Test 1. This provides information about a series of tests that indicate how well a physical drive works. These tests compare the way the physical dr… |
| 1.3.6.1.4.1.232.16.2.5.1.1.23 | ColumncpqFcaPhyDrvFunctTest2 | read-only | deprecated | Functional Test 2. This provides information about a series of tests that indicate how well a physical drive works. These tests compare the way the physical dr… |
| 1.3.6.1.4.1.232.16.2.5.1.1.24 | ColumncpqFcaPhyDrvFunctTest3 | read-only | deprecated | Functional Test 3. This provides information about a series of tests that indicate how well a physical drive works. These tests compare the way the physical dr… |
| 1.3.6.1.4.1.232.16.2.5.1.1.25 | ColumncpqFcaPhyDrvOtherTimeouts | read-only | mandatory | Other Timeouts. The number of times that a physical drive did not respond with an interrupt within a controller-defined period of time after a command had been… |
| 1.3.6.1.4.1.232.16.2.5.1.1.26 | ColumncpqFcaPhyDrvBadRecvReads | read-only | mandatory | Recovery Failed (Bad) Read Error. The number of times a read error occurred while performing Automatic Data Recovery from this physical drive to another drive … |
| 1.3.6.1.4.1.232.16.2.5.1.1.27 | ColumncpqFcaPhyDrvBadRecvWrites | read-only | mandatory | Recovery Failed (Bad) Write Error. The number of times a write error occurred while performing Automatic Data Recovery from another drive to this physical driv… |
| 1.3.6.1.4.1.232.16.2.5.1.1.28 | ColumncpqFcaPhyDrvFormatErrs | read-only | mandatory | Format Error. The number of times a format operation failed when the controller attempted to remap a bad sector during the reference time (phyDrvRefTime). Zero… |
| 1.3.6.1.4.1.232.16.2.5.1.1.29 | ColumncpqFcaPhyDrvNotReadyErrs | read-only | mandatory | Drive Not Ready Errors. The number of times the physical drive failed after the spin up command was issued during the reference time (phyDrvRefTime). When the … |
| 1.3.6.1.4.1.232.16.2.5.1.1.30 | ColumncpqFcaPhyDrvHasMonInfo | read-only | mandatory | Physical Drive Has Monitor Information. All of the physical disk table fields except for the physical disk status (phyDrvStatus) and the bay location (phyDrvBa… |
| 1.3.6.1.4.1.232.16.2.5.1.1.31 | ColumncpqFcaPhyDrvCondition | read-only | mandatory | The condition of the device. This value represents the overall condition of this physical drive. |
| 1.3.6.1.4.1.232.16.2.5.1.1.32 | ColumncpqFcaPhyDrvHotPlugs | read-only | mandatory | Physical Drive Hot Plug Count. This value indicates the number of times this physical drive was hot-plugged (removed) from a storage system. If the value canno… |
| 1.3.6.1.4.1.232.16.2.5.1.1.33 | ColumncpqFcaPhyDrvMediaErrs | read-only | mandatory | Physical Drive Media Failure Count. This value indicates the number of times this physical drive was failed due to unrecoverable media errors. If the value can… |
| 1.3.6.1.4.1.232.16.2.5.1.1.34 | ColumncpqFcaPhyDrvHardwareErrs | read-only | mandatory | Physical Drive Hardware Error Count. This value indicates the number of times this physical drive returned a bad hardware status. The drive may be failed if re… |
| 1.3.6.1.4.1.232.16.2.5.1.1.35 | ColumncpqFcaPhyDrvAbortedCmds | read-only | mandatory | Physical Drive Aborted Command Failures. This value indicates the number of times this physical drive was failed due to aborted commands that could not be retr… |
| 1.3.6.1.4.1.232.16.2.5.1.1.36 | ColumncpqFcaPhyDrvSpinUpErrs | read-only | mandatory | Physical Drive Spin-Up Failure Count. This value indicates the number of times this physical drive was failed due to a failure of a spin-up command. If the val… |
| 1.3.6.1.4.1.232.16.2.5.1.1.37 | ColumncpqFcaPhyDrvBadTargetErrs | read-only | mandatory | Physical Drive Bad Target Count. This value indicates the number of times this physical drive performed some action that did not conform to the SCSI-2 bus prot… |
| 1.3.6.1.4.1.232.16.2.5.1.1.38 | ColumncpqFcaPhyDrvSize | read-only | mandatory | Physical Drive Size in MB. This is the size of the physical drive in megabytes. This value is calculated using the value 1,048,576 (2^20) as a megabyte. Drive … |
| 1.3.6.1.4.1.232.16.2.5.1.1.39 | ColumncpqFcaPhyDrvBusFaults | read-only | mandatory | Physical Drive Bus Fault Count. This value indicates the number of times that a bus fault was detected for the drive by the controller. If the value cannot be … |
| 1.3.6.1.4.1.232.16.2.5.1.1.40 | ColumncpqFcaPhyDrvHotPlug | read-only | mandatory | Physical Drive Hot Plug Support Status. The following values are defined: other(1) The Insight Agent is unable to determine if this drive supports hot plug rep… |
| 1.3.6.1.4.1.232.16.2.5.1.1.41 | ColumncpqFcaPhyDrvPlacement | read-only | mandatory | Physical Drive Placement. The following values are defined: other(1) The agent is unable to determine if the drive is internal or external to the system chassi… |
| 1.3.6.1.4.1.232.16.2.5.1.1.42 | ColumncpqFcaPhyDrvBusNumber | read-only | mandatory | Physical Drive SCSI Bus Number. The bus number indicates to which SCSI bus this physical drive is attached. The first instance is one and increments for each S… |
| 1.3.6.1.4.1.232.16.2.5.1.1.43 | ColumncpqFcaPhyDrvSerialNum | read-only | mandatory | Physical Drive Serial Number. This is the serial number assigned to the physical drive. This value is based upon the serial number as returned by the SCSI inqu… |
| 1.3.6.1.4.1.232.16.2.5.1.1.44 | ColumncpqFcaPhyDrvPreFailMonitoring | read-only | mandatory | Physical Drive Predictive Failure Monitoring. The following values are defined: other(1) The agent is unable to determine if the drive supports predictive fail… |
| 1.3.6.1.4.1.232.16.2.5.1.1.45 | ColumncpqFcaPhyDrvCurrentWidth | read-only | mandatory | Physical Drive Current Width. The following values are defined: other(1) The agent is unable to determine the current negotiated data transfer width for this d… |
| 1.3.6.1.4.1.232.16.2.5.1.1.46 | ColumncpqFcaPhyDrvCurrentSpeed | read-only | mandatory | Physical Drive Current Data Transfer Speed. The following values are defined: other(1) The agent is unable to determine the current negotiated data transfer sp… |
| 1.3.6.1.4.1.232.16.2.5.1.1.47 | ColumncpqFcaPhyDrvFailureCode | read-only | mandatory | Physical Drive Failure Code. This value is the drive failure reason code returned by the array firmware. It is valid only when the drive is failed. If the driv… |
| 1.3.6.1.4.1.232.16.2.5.1.1.48 | ColumncpqFcaPhyDrvBlinkTime | read-write | mandatory | Physical Drive LED Blink Time. This value is the amount of time remaining for the drive LEDs to blink in tenths of seconds. A value of zero means the drive LED… |
| 1.3.6.1.4.1.232.16.2.5.1.1.49 | ColumncpqFcaPhyDrvSmartStatus | read-only | mandatory | Physical Drive S.M.A.R.T Status. The following values are defined: other(1) The agent is unable to determine if the status of S.M.A.R.T predictive failure moni… |
| 1.3.6.1.4.1.232.16.2.5.1.1.50 | ColumncpqFcaPhyDrvRotationalSpeed | read-only | mandatory | Physical Drive Rotational Speed. The following values are defined: other(1) The agent is unable to determine the rotational speed for this drive. rpm7200(2) Th… |
| 1.3.6.1.4.1.232.16.2.5.1.1.51 | ColumncpqFcaPhyDrvType | read-only | mandatory | Physical Drive Type. The following values are defined: other(1) The agent is unable to determine the type for this drive. parallelScsi(2) The drive type is par… |
| 1.3.6.1.4.1.232.16.2.5.1.1.52 | ColumncpqFcaPhyDrvSataVersion | read-only | mandatory | Physical Drive SATA Version. The following values are defined: other(1) The agent is unable to determine the SATA version for this drive or it is not a SATA dr… |
| 1.3.6.1.4.1.232.16.2.5.1.1.53 | ColumncpqFcaPhyDrvBoxConnector | read-only | mandatory | Physical Drive Box Connector. This is the box connector to which the drive is ultimately attached. If the box connector cannot be determined, the agent will re… |
| 1.3.6.1.4.1.232.16.2.5.1.1.54 | ColumncpqFcaPhyDrvBoxOnConnector | read-only | mandatory | Physical Drive Box on Connector. The box on connector indicates to which box instance this physical drive belongs. The instances start at one and increment for… |
| 1.3.6.1.4.1.232.16.2.5.1.1.55 | ColumncpqFcaPhyDrvLocationString | read-only | mandatory | Physical Drive Location String. This string describes the location of the drive in relation to the storage box. If the location string cannot be determined, th… |
| 1.3.6.1.4.1.232.16.2.5.1.1.56 | ColumncpqFcaPhyDrvNegotiatedLinkRate | read-only | mandatory | Physical Drive Negotiated Link Rate. The following values are defined: other(1) The agent is unable to determine the negotiated link rate this drive. rate-1-5(… |
| 1.3.6.1.4.1.232.16.2.5.1.1.57 | ColumncpqFcaPhyDrvPhyCount | read-only | mandatory | Physical Drive PHY Count. This value indicates how many PHYs exist on a SAS or SATA disk drive. If the value cannot be determined or does not apply, -1 is retu… |
| 1.3.6.1.4.1.232.16.2.5.1.1.58 | ColumncpqFcaPhyDrvUnsupportedDrive | read-only | mandatory | Physical Drive Unsupported Drive. The following values are defined: other(1) The agent is unable to determine the value for this drive. supported(2) The drive … |
| 1.3.6.1.4.1.232.16.2.6 | NodecpqFcaPhyDrvThr | |||
| 1.3.6.1.4.1.232.16.2.6.1 | TablecpqFcaPhyDrvThrTable | not-accessible | mandatory | Drive Array Physical Drive Threshold Table. A table of physical drive threshold entries. |
| 1.3.6.1.4.1.232.16.2.6.1.1 | RowcpqFcaPhyDrvThrEntry | not-accessible | mandatory | Drive Array Physical Drive Threshold Entry. A physical drive threshold entry. |
| 1.3.6.1.4.1.232.16.2.6.1.1.1 | ColumncpqFcaPhyDrvThrBoxIndex | read-only | mandatory | External Array Physical Drive Threshold Storage Box Index. The storage box index indicates which storage box this physical drive is in. |
| 1.3.6.1.4.1.232.16.2.6.1.1.2 | ColumncpqFcaPhyDrvThrIndex | read-only | mandatory | Drive Array Physical Drive Threshold Index. This index maps the thresholds to a physical drive. The value of this index is the same as the one used with the ph… |
| 1.3.6.1.4.1.232.16.2.6.1.1.3 | ColumncpqFcaPhyDrvThrUsedReallocs | read-only | mandatory | Used Reallocated Sectors Maximum Threshold. This shows the maximum threshold of the reallocation area that has been used by the physical drive. This threshold … |
| 1.3.6.1.4.1.232.16.2.6.1.1.4 | ColumncpqFcaPhyDrvThrSpinupTime | read-only | mandatory | Spin up Time Maximum Threshold in tenths of seconds. This shows the maximum of time it takes for a physical drive to spin up to full speed. This threshold is a… |
| 1.3.6.1.4.1.232.16.2.6.1.1.5 | ColumncpqFcaPhyDrvThrFunctTest1 | read-only | deprecated | Functional Test 1 Minimum Threshold. This provides the minimum threshold for information about a series of tests that indicate how well a physical drive works.… |
| 1.3.6.1.4.1.232.16.2.6.1.1.6 | ColumncpqFcaPhyDrvThrFunctTest2 | read-only | deprecated | Functional Test 2 Minimum Threshold. This provides the minimum threshold for information about a series of tests that indicate how well a physical drive works.… |
| 1.3.6.1.4.1.232.16.2.6.1.1.7 | ColumncpqFcaPhyDrvThrFunctTest3 | read-only | deprecated | Functional Test 3 Minimum Threshold. This provides the minimum threshold for information about a series of tests that indicate how well a physical drive works.… |
| 1.3.6.1.4.1.232.16.2.6.1.1.8 | ColumncpqFcaPhyDrvThrViUsedReallocs | read-only | mandatory | Used Reallocated Sectors Threshold Has Been Violated. This is used to indicate whether the number of used sectors of the reallocation area for a physical drive… |
| 1.3.6.1.4.1.232.16.2.6.1.1.9 | ColumncpqFcaPhyDrvThrViSpinupTime | read-only | mandatory | Spin up Time in tenths of seconds Threshold Has Been Violated. This is used to indicate whether the time it took for a physical drive to spin up to full speed … |
| 1.3.6.1.4.1.232.16.2.6.1.1.10 | ColumncpqFcaPhyDrvThrViFunctTest1 | read-only | mandatory | Functional Test 1 Threshold Has Been Violated. This is used to indicate whether the percentage value returned from Functional Test 1 has every dropped below th… |
| 1.3.6.1.4.1.232.16.2.6.1.1.11 | ColumncpqFcaPhyDrvThrViFunctTest2 | read-only | mandatory | Functional Test 2 Threshold Has Been Violated. This is used to indicate whether the percentage value returned from Functional Test 2 has every dropped below th… |
| 1.3.6.1.4.1.232.16.2.6.1.1.12 | ColumncpqFcaPhyDrvThrViFunctTest3 | read-only | mandatory | Functional Test 3 Threshold Has Been Violated. This is used to indicate whether the percentage value returned from Functional Test 3 has every dropped below th… |
| 1.3.6.1.4.1.232.16.2.7 | NodecpqFcaHostCntlr | |||
| 1.3.6.1.4.1.232.16.2.7.1 | TablecpqFcaHostCntlrTable | not-accessible | mandatory | Fibre Channel Host Controller Table. |
| 1.3.6.1.4.1.232.16.2.7.1.1 | RowcpqFcaHostCntlrEntry | not-accessible | mandatory | Array Controller Entry. |
| 1.3.6.1.4.1.232.16.2.7.1.1.1 | ColumncpqFcaHostCntlrIndex | read-only | mandatory | Fibre Channel Host Controller Index. This value is a logical number whose meaning is OS dependent. Each physical controller has one unique controller number as… |
| 1.3.6.1.4.1.232.16.2.7.1.1.2 | ColumncpqFcaHostCntlrSlot | read-only | mandatory | Fibre Channel Host Controller Slot. This identifies the physical slot where the Fibre Channel Host Controller resides in the system. For example, if this value… |
| 1.3.6.1.4.1.232.16.2.7.1.1.3 | ColumncpqFcaHostCntlrModel | read-only | mandatory | Fibre Channel Host Controller Model. The type of controller card. The valid types are: Other (1) You may need to upgrade your driver software and\or instrument… |
| 1.3.6.1.4.1.232.16.2.7.1.1.4 | ColumncpqFcaHostCntlrStatus | read-only | mandatory | Fibre Channel Host Controller Status. The host controller can be in one of the following states: Other (1) The agent is unable to determine the status of the h… |
| 1.3.6.1.4.1.232.16.2.7.1.1.5 | ColumncpqFcaHostCntlrCondition | read-only | mandatory | Fibre Channel Host Controller Condition. This value represents the condition of this controller. |
| 1.3.6.1.4.1.232.16.2.7.1.1.6 | ColumncpqFcaHostCntlrWorldWideName | read-only | mandatory | Fibre Channel Host Controller World Wide Node Name. This value can be used to further identify a particular controller. If the world wide node name is not supp… |
| 1.3.6.1.4.1.232.16.2.7.1.1.7 | ColumncpqFcaHostCntlrStorBoxList | read-only | mandatory | Fibre Channel Host Controller Storage Box List. This lists the storage boxes which are associated with this host controller. These are the same IDs which can b… |
| 1.3.6.1.4.1.232.16.2.7.1.1.8 | ColumncpqFcaHostCntlrOverallCondition | read-only | mandatory | Fibre Channel Host Controller Overall Condition. This value represents the overall condition of this controller, and any associated storage boxes. |
| 1.3.6.1.4.1.232.16.2.7.1.1.9 | ColumncpqFcaHostCntlrTapeCntlrList | read-only | mandatory | Fibre Channel Host Controller Tape Controller List. This lists the tape controllers which are associated with this host controller. These are the same IDs whic… |
| 1.3.6.1.4.1.232.16.2.7.1.1.10 | ColumncpqFcaHostCntlrSerialNumber | read-only | mandatory | Fibre Channel Host Controller Serial Number. This value can be used to further identify a particular controller. If the serial number is not supported, the age… |
| 1.3.6.1.4.1.232.16.2.7.1.1.11 | ColumncpqFcaHostCntlrHwLocation | read-only | optional | A text description of the hardware location, on complex multi SBB hardware only, for the controller. A NULL string indicates that the hardware location could n… |
| 1.3.6.1.4.1.232.16.2.7.1.1.12 | ColumncpqFcaHostCntlrWorldWidePortName | read-only | mandatory | Fibre Channel Host Controller World Wide Port Name. This value can be used to further identify a particular controller. If the world wide port name is not supp… |
| 1.3.6.1.4.1.232.16.2.7.1.1.13 | ColumncpqFcaHostCntlrFirmwareVersion | read-only | mandatory | Fibre Channel Host Controller Firmware Version. This shows the host controller firmware version number. If the firmware version number is not supported, the ag… |
| 1.3.6.1.4.1.232.16.2.7.1.1.14 | ColumncpqFcaHostCntlrOptionRomVersion | read-only | mandatory | Fibre Channel Host Controller Option ROM Version. This shows the host controller option ROM version number. If the option ROM version number is not supported, … |
| 1.3.6.1.4.1.232.16.2.7.1.1.15 | ColumncpqFcaHostCntlrPciLocation | read-only | optional | A string designating the PCI device location for the controller, following the format DDDD:BB:DD.F, where DDDD is the PCI domain number, BB is the PCI bus numb… |
| 1.3.6.1.4.1.232.16.2.8 | NodecpqExtArrRsrcVol | |||
| 1.3.6.1.4.1.232.16.2.8.1 | TablecpqExtArrRsrcVolTable | not-accessible | mandatory | External Array Snapshot Resource Volume Table. A table of snapshot resource volume entries. |
| 1.3.6.1.4.1.232.16.2.8.1.1 | RowcpqExtArrRsrcVolEntry | not-accessible | mandatory | External Array Snapshot Resource Volume Entry. A snapshot resource volume entry. |
| 1.3.6.1.4.1.232.16.2.8.1.1.1 | ColumncpqExtArrRsrcVolBoxIndex | read-only | mandatory | External Array Snapshot Resource Volume Storage Box Index. This is the index of the storage box that contains this snapshot resource volume. |
| 1.3.6.1.4.1.232.16.2.8.1.1.2 | ColumncpqExtArrRsrcVolIndex | read-only | mandatory | External Array Snapshot Resource Volume Index. This index maps the snapshot resource volume to its associated logical drive (cpqFcaLogDrvIndex). |
| 1.3.6.1.4.1.232.16.2.8.1.1.3 | ColumncpqExtArrRsrcVolActiveInstances | read-only | mandatory | External Array Snapshot Resource Volume Active Instances. This is the number of active snapshot instances on this snapshot resource volume. |
| 1.3.6.1.4.1.232.16.2.8.1.1.4 | ColumncpqExtArrRsrcVolDisabledInstances | read-only | mandatory | External Array Snapshot Resource Volume Disabled Instances. This is the number of disabled snapshot instances on this snapshot resource volume. |
| 1.3.6.1.4.1.232.16.2.8.1.1.5 | ColumncpqExtArrRsrcVolAllowCreation | read-only | mandatory | External Array Snapshot Resource Volume Allow Snapshot Creation. other (1) The agent is unable to determine if snapshot creation is allowed. allowed (2) Indica… |
| 1.3.6.1.4.1.232.16.2.8.1.1.6 | ColumncpqExtArrRsrcVolVolumeId | read-only | mandatory | External Array Snapshot Resource Volume Id. This is the snapshot resource volume id. It can be used for identification purposes. |
| 1.3.6.1.4.1.232.16.2.8.1.1.7 | ColumncpqExtArrRsrcVolSourceVolumeId | read-only | mandatory | External Array Snapshot Resource Volume Source Volume Id. This is the snapshot resource volume source resource volume id. It can be used for identification pur… |
| 1.3.6.1.4.1.232.16.2.8.1.1.8 | ColumncpqExtArrRsrcVolTotalSpace | read-only | mandatory | External Array Snapshot Resource Volume Total Space. This is total amount (megabytes) of resource pool space. If the value cannot be determined, 4,294,967,295 … |
| 1.3.6.1.4.1.232.16.2.8.1.1.9 | ColumncpqExtArrRsrcVolFreeActiveSpace | read-only | mandatory | External Array Snapshot Resource Volume Free Active Space. This is the amount of free space (megabytes) available for the current active snapshot. If the value… |
| 1.3.6.1.4.1.232.16.2.8.1.1.10 | ColumncpqExtArrRsrcVolFreeNewSpace | read-only | mandatory | External Array Snapshot Resource Volume Free New Space. This is the amount of free space (megabytes) available for new snapshot creation. If the value cannot b… |
| 1.3.6.1.4.1.232.16.2.8.1.1.11 | ColumncpqExtArrRsrcVolStatus | read-only | mandatory | External Array Snapshot Resource Volume Status. The resource volume can be in one of the following states: other (1) The agent is unable to determine the statu… |
| 1.3.6.1.4.1.232.16.2.9 | NodecpqExtArrSnapshot | |||
| 1.3.6.1.4.1.232.16.2.9.1 | TablecpqExtArrSnapshotTable | not-accessible | mandatory | External Array Snapshot Table. A table of snapshot entries. |
| 1.3.6.1.4.1.232.16.2.9.1.1 | RowcpqExtArrSnapshotEntry | not-accessible | mandatory | External Array Snapshot Entry. A snapshot entry. |
| 1.3.6.1.4.1.232.16.2.9.1.1.1 | ColumncpqExtArrSnapshotBoxIndex | read-only | mandatory | External Array Snapshot Storage Box Index. This is the index of the storage box that contains this snapshot. |
| 1.3.6.1.4.1.232.16.2.9.1.1.2 | ColumncpqExtArrSnapshotRsrcVolIndex | read-only | mandatory | External Array Snapshot Resource Volume Index. This is the index of the snapshot resource volume that contains this snapshot. |
| 1.3.6.1.4.1.232.16.2.9.1.1.3 | ColumncpqExtArrSnapshotIndex | read-only | mandatory | External Array Snapshot Index. This is a unique index for this snapshot. |
| 1.3.6.1.4.1.232.16.2.9.1.1.4 | ColumncpqExtArrSnapshotInstance | read-only | mandatory | External Array Snapshot Instance. This is the snapshot instance returned from the controller. |
| 1.3.6.1.4.1.232.16.2.9.1.1.5 | ColumncpqExtArrSnapshotUsedSpace | read-only | mandatory | External Array Snapshot Used Space. This is the total amount of space (megabytes) used by this snapshot instance. If the value cannot be determined, 4,294,967,… |
| 1.3.6.1.4.1.232.16.2.9.1.1.6 | ColumncpqExtArrSnapshotDateTime | read-only | deprecated | External Array Snapshot Creation Date and Time. field octets contents range ===== ====== ======= ===== 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 ho… |
| 1.3.6.1.4.1.232.16.2.9.1.1.7 | ColumncpqExtArrSnapshotType | read-only | mandatory | External Array Snapshot Type. other (1) The agent is unable to determine the snapshot type. cow (2) Indicates that the snapshot type is copy on write. |
| 1.3.6.1.4.1.232.16.2.9.1.1.8 | ColumncpqExtArrSnapshotMounted | read-only | mandatory | External Array Snapshot Mounted. other (1) The agent is unable to determine if the snapshot is mounted. mounted (2) Indicates that the snapshot is mounted and … |
| 1.3.6.1.4.1.232.16.2.9.1.1.9 | ColumncpqExtArrSnapshotAccess | read-only | mandatory | External Array Snapshot Access. other (1) The agent is unable to determine if the snapshot is mounted. readWrite (2) Indicates that the snapshot is read-write.… |
| 1.3.6.1.4.1.232.16.3 | NodecpqFcTapeComponent | |||
| 1.3.6.1.4.1.232.16.3.1 | NodecpqFcTapeCntlr | |||
| 1.3.6.1.4.1.232.16.3.1.1 | TablecpqFcTapeCntlrTable | not-accessible | mandatory | Fibre Channel Tape Controller Table. |
| 1.3.6.1.4.1.232.16.3.1.1.1 | RowcpqFcTapeCntlrEntry | not-accessible | mandatory | Fibre Channel Tape Controller Entry. |
| 1.3.6.1.4.1.232.16.3.1.1.1.1 | ColumncpqFcTapeCntlrIndex | read-only | mandatory | Fibre Channel Tape Controller Index. This value is a logical number whose meaning is OS dependent. Each tape controller has one unique controller number associ… |
| 1.3.6.1.4.1.232.16.3.1.1.1.2 | ColumncpqFcTapeCntlrStatus | read-only | mandatory | Fibre Channel Tape Controller Status. The following values are defined: other(1) The agent is unable to determine the status of the tape controller. ok(2) The … |
| 1.3.6.1.4.1.232.16.3.1.1.1.3 | ColumncpqFcTapeCntlrCondition | read-only | mandatory | Fibre Channel Tape Controller Condition. This value represents the condition of the tape controller. |
| 1.3.6.1.4.1.232.16.3.1.1.1.4 | ColumncpqFcTapeCntlrOverallCondition | read-only | mandatory | Fibre Channel Tape Controller Index. This value represents the overall condition of the tape controller and any associated tape libraries. |
| 1.3.6.1.4.1.232.16.3.1.1.1.5 | ColumncpqFcTapeCntlrWWN | read-only | mandatory | Fibre Channel Tape Controller World Wide Name. This value can be used to further identify a particular tape controller. If the world wide name is not supported… |
| 1.3.6.1.4.1.232.16.3.1.1.1.6 | ColumncpqFcTapeCntlrFWRev | read-only | mandatory | Fibre Channel Tape Controller Firmware Revision. This shows the tape controller firmware revision number. If the firmware revision number is not supported, the… |
| 1.3.6.1.4.1.232.16.3.1.1.1.7 | ColumncpqFcTapeCntlrType | read-only | mandatory | Fibre Channel Tape Controller Type. The following values are defined: other(1) The agent is unable to determine if the type of the tape controller. fiberTape(2… |
| 1.3.6.1.4.1.232.16.3.1.1.1.8 | ColumncpqFcTapeCntlrModel | read-only | mandatory | Fibre Channel Tape Controller Model. This is the model name of the tape controller. It can be used for identification purposes. If the model name can not be de… |
| 1.3.6.1.4.1.232.16.3.1.1.1.9 | ColumncpqFcTapeCntlrSerialNumber | read-only | mandatory | Fibre Channel Tape Controller Serial Number. This is the serial number of the tape controller. It can be used for identification purposes. If the serial number… |
| 1.3.6.1.4.1.232.16.3.2 | NodecpqFcTapeLibrary | |||
| 1.3.6.1.4.1.232.16.3.2.1 | TablecpqFcTapeLibraryTable | not-accessible | mandatory | Fibre Channel Tape Library Table. |
| 1.3.6.1.4.1.232.16.3.2.1.1 | RowcpqFcTapeLibraryEntry | not-accessible | mandatory | Fibre Channel Tape Library Entry. |
| 1.3.6.1.4.1.232.16.3.2.1.1.1 | ColumncpqFcTapeLibraryCntlrIndex | read-only | mandatory | Fibre Channel Tape Library Controller Index. This value is a logical number whose meaning is OS dependent. Each tape controller has one unique controller numbe… |
| 1.3.6.1.4.1.232.16.3.2.1.1.2 | ColumncpqFcTapeLibraryScsiBus | read-only | mandatory | Fibre Channel Tape Library Scsi Bus. The bus index indicates to which SCSI bus instance on a tape controller this table entry belongs. |
| 1.3.6.1.4.1.232.16.3.2.1.1.3 | ColumncpqFcTapeLibraryScsiTarget | read-only | mandatory | Fibre Channel Tape Library Scsi Target. The target index indicates to which SCSI ID on a tape controller SCSI bus this table entry belongs. |
| 1.3.6.1.4.1.232.16.3.2.1.1.4 | ColumncpqFcTapeLibraryScsiLun | read-only | mandatory | Fibre Channel Tape Library Scsi Lun. The Lun index indicates to which logical unit on a SCSI ID on a tape controller SCSI bus this table entry belongs. |
| 1.3.6.1.4.1.232.16.3.2.1.1.5 | ColumncpqFcTapeLibrarySerialNumber | read-only | mandatory | Fibre Channel Tape Library Serial Number. This is the unit serial number for the tape library. It can be used for identification purposes. |
| 1.3.6.1.4.1.232.16.3.2.1.1.6 | ColumncpqFcTapeLibraryModel | read-only | mandatory | Fibre Channel Tape Library Model. This is the model name of the tape library. It can be used for identification purposes. |
| 1.3.6.1.4.1.232.16.3.2.1.1.7 | ColumncpqFcTapeLibraryFWRev | read-only | mandatory | Fibre Channel Tape Firmware Revision. This is firmware revision level of the tape library. It can be used for identification purposes. |
| 1.3.6.1.4.1.232.16.3.2.1.1.8 | ColumncpqFcTapeLibraryStatus | read-only | mandatory | Fibre Channel Tape Library Status. The library can be in one of the following states: other(1) The library is in a state other than one of those listed below. … |
| 1.3.6.1.4.1.232.16.3.2.1.1.9 | ColumncpqFcTapeLibraryDoorStatus | read-only | mandatory | Fibre Channel Tape Library Door Status. The door can be in one of the following states: other(1) The door is in a state other than one of those listed below. n… |
| 1.3.6.1.4.1.232.16.3.2.1.1.10 | ColumncpqFcTapeLibraryCondition | read-only | mandatory | Fibre Channel Tape Library Condition. This value represents the overall condition of the tape library. |
| 1.3.6.1.4.1.232.16.3.2.1.1.11 | ColumncpqFcTapeLibraryOverallCondition | read-only | mandatory | Fibre Channel Tape Library Overall Condition. This value represents the overall condition of the tape library and any associated tape drives. |
| 1.3.6.1.4.1.232.16.3.2.1.1.12 | ColumncpqFcTapeLibraryLastError | read-only | mandatory | Fibre Channel Tape Library Last Error. This is the last error returned by the tape library. |
| 1.3.6.1.4.1.232.16.3.2.1.1.13 | ColumncpqFcTapeLibraryStatHours | read-only | mandatory | Fibre Channel Tape Library Stat Hours. This is the number of hours of operation for the library. |
| 1.3.6.1.4.1.232.16.3.2.1.1.14 | ColumncpqFcTapeLibraryStatMoves | read-only | mandatory | Fibre Channel Tape Library Stat Moves. This is the number of tape moves for the library loader arm. |
| 1.3.6.1.4.1.232.16.3.2.1.1.15 | ColumncpqFcTapeLibraryDriveList | read-only | mandatory | Fibre Channel Tape Library Tape Drive List. This is a data structure containing the list of tape drive ids that are present in this library. The format is: fie… |
| 1.3.6.1.4.1.232.16.3.2.1.1.16 | ColumncpqFcTapeLibraryLocation | read-only | mandatory | External Tape Library Location. This is the location of the tape library. |
| 1.3.6.1.4.1.232.16.3.2.1.1.17 | ColumncpqFcTapeLibraryTemperature | read-only | mandatory | External Tape Library Temperature Status. The library temperature can be in one of the following states: other(1) The library temperature status is unknown. no… |
| 1.3.6.1.4.1.232.16.3.2.1.1.18 | ColumncpqFcTapeLibraryRedundancy | read-only | mandatory | External Tape Library Redundancy Status. Redundancy status denotes the presence of internal redundant components such as fans, power supplies, etc. The library… |
| 1.3.6.1.4.1.232.16.3.2.1.1.19 | ColumncpqFcTapeLibraryHotSwap | read-only | mandatory | External Tape Library Hot Swap Status. Hot swap status denotes the presence of hot swappable internal components such as drives, fans, power supplies, etc. The… |
| 1.3.6.1.4.1.232.16.3.3 | NodecpqFcTapeDrive | |||
| 1.3.6.1.4.1.232.16.3.3.1 | TablecpqFcTapeDriveTable | not-accessible | mandatory | Fibre Channel Tape Drive Table. |
| 1.3.6.1.4.1.232.16.3.3.1.1 | RowcpqFcTapeDriveEntry | not-accessible | mandatory | Fibre Channel Tape Drive Entry. |
| 1.3.6.1.4.1.232.16.3.3.1.1.1 | ColumncpqFcTapeDriveCntlrIndex | read-only | mandatory | External Tape Drive Controller Index. This value is a logical number whose meaning is OS dependent. For tape controller has one unique controller number associ… |
| 1.3.6.1.4.1.232.16.3.3.1.1.2 | ColumncpqFcTapeDriveScsiBus | read-only | mandatory | External Tape Drive Scsi Bus. The bus index indicates to which SCSI bus instance on a tape controller this table entry belongs. |
| 1.3.6.1.4.1.232.16.3.3.1.1.3 | ColumncpqFcTapeDriveScsiTarget | read-only | mandatory | External Tape Drive Scsi Target. The target index indicates to which SCSI ID on a tape controller SCSI bus this table entry belongs. |
| 1.3.6.1.4.1.232.16.3.3.1.1.4 | ColumncpqFcTapeDriveScsiLun | read-only | mandatory | External Tape Drive Scsi Lun. The Lun index indicates to which logical unit on a SCSI ID on a tape controller SCSI bus this table entry belongs. |
| 1.3.6.1.4.1.232.16.3.3.1.1.5 | ColumncpqFcTapeDriveSerialNumber | read-only | mandatory | External Tape Drive Serial Number. This is the unit serial number for the tape drive. It can be used for identification purposes. |
| 1.3.6.1.4.1.232.16.3.3.1.1.6 | ColumncpqFcTapeDriveModel | read-only | mandatory | External Tape Drive Model. This is the model name of the tape drive. It can be used for identification purposes. |
| 1.3.6.1.4.1.232.16.3.3.1.1.7 | ColumncpqFcTapeDriveFWRev | read-only | mandatory | External Tape Drive Firmware Revision. This is firmware revision level of the tape drive. It can be used for identification purposes. |
| 1.3.6.1.4.1.232.16.3.3.1.1.8 | ColumncpqFcTapeDriveType | read-only | deprecated | External Tape Drive Type. This is the drive type. It can be used for identification purposes. The following values are defined: other(1) The management agent d… |
| 1.3.6.1.4.1.232.16.3.3.1.1.9 | ColumncpqFcTapeDriveFWSubtype | read-only | mandatory | External Tape Drive Firmware Subtype. This is used to differentiate the firmware versions which have the same tape drive type (as specified by cpqFcTapeDriveTy… |
| 1.3.6.1.4.1.232.16.3.3.1.1.10 | ColumncpqFcTapeDriveStatus | read-only | mandatory | External Tape Drive Status. The tape drive can be in one of the following states: other(1) The tape drive is in a state other than one of those listed below. o… |
| 1.3.6.1.4.1.232.16.3.3.1.1.11 | ColumncpqFcTapeDriveCleanReq | read-only | mandatory | External Tape Drive Cleaning Required. This is an indication of whether the tape drive heads require a cleaning session to occur. If this variable indicates a … |
| 1.3.6.1.4.1.232.16.3.3.1.1.12 | ColumncpqFcTapeDriveCleanTapeRepl | read-only | mandatory | External Tape Drive Cleaning Tape Replacement. This variable is only applicable to autoloader tape drives. This variable indicates whether the cleaning tape wh… |
| 1.3.6.1.4.1.232.16.3.3.1.1.13 | ColumncpqFcTapeDriveCondition | read-only | mandatory | External Tape Drive Condition. This value represents the overall condition of the tape drive. |
| 1.3.6.1.4.1.232.16.3.3.1.1.14 | ColumncpqFcTapeDriveCleanTapeCount | read-only | mandatory | External Tape Drive Cleaning Tape Count. This variable is a count from a tape drive of the number of cleanings done by the tape cleaner last in the drive. |
| 1.3.6.1.4.1.232.16.3.3.1.1.15 | ColumncpqFcTapeDriveLibraryDrive | read-only | mandatory | External Tape Drive Library Drive. This variable indicates whether or not the tape drive is part of a tape library. It can be in one of the following states: o… |
| 1.3.6.1.4.1.232.16.3.3.1.1.16 | ColumncpqFcTapeDriveLocation | read-only | mandatory | External Tape Drive Location. This is the location of the tape drive. |
| 1.3.6.1.4.1.232.16.3.3.1.1.17 | ColumncpqFcTapeDriveHotPlug | read-only | mandatory | External Tape Drive Hot Plug Support Status. The following values are defined: other(1) The agent is unable to determine if this drive supports hot plug replac… |
| 1.3.6.1.4.1.232.16.3.3.1.1.18 | ColumncpqFcTapeDriveBay | read-only | mandatory | External Tape Drive Bay. For drives in a hot plug storage system, this is the bay where the tape drive is located. If the value cannot be determined or is not … |
| 1.3.6.1.4.1.232.16.3.3.1.1.19 | ColumncpqFcTapeDriveCurrentWidth | read-only | mandatory | External Tape Drive Current Width. The following values are defined: other(1) The agent is unable to determine the current negotiated data transfer width for t… |
| 1.3.6.1.4.1.232.16.3.3.1.1.20 | ColumncpqFcTapeDriveCurrentSpeed | read-only | mandatory | External Tape Drive Current Data Transfer Speed. The following values are defined: other(1) The agent is unable to determine the current negotiated data transf… |
| 1.3.6.1.4.1.232.16.3.4 | NodecpqFcTapeCounters | |||
| 1.3.6.1.4.1.232.16.3.4.1 | TablecpqFcTapeCountersTable | not-accessible | mandatory | Fibre Channel Tape Counters Table. |
| 1.3.6.1.4.1.232.16.3.4.1.1 | RowcpqFcTapeCountersEntry | not-accessible | mandatory | Fibre Channel Tape Counters Entry. |
| 1.3.6.1.4.1.232.16.3.4.1.1.1 | ColumncpqFcTapeCountersCntlrIndex | read-only | mandatory | Fibre Channel Tape Counters Controller Index. This value is a logical number whose meaning is OS dependent. Each tape controller has one unique controller numb… |
| 1.3.6.1.4.1.232.16.3.4.1.1.2 | ColumncpqFcTapeCountersScsiBus | read-only | mandatory | Fibre Channel Tape Counters Scsi Bus. The bus index indicates to which SCSI bus instance on a tape controller this table entry belongs. |
| 1.3.6.1.4.1.232.16.3.4.1.1.3 | ColumncpqFcTapeCountersScsiTarget | read-only | mandatory | Fibre Channel Tape Counters Scsi Target. The target index indicates to which SCSI ID on a tape controller SCSI bus this table entry belongs. |
| 1.3.6.1.4.1.232.16.3.4.1.1.4 | ColumncpqFcTapeCountersScsiLun | read-only | mandatory | Fibre Channel Tape Counters Scsi Lun. The Lun index indicates to which logical unit on a SCSI ID on a tape controller SCSI bus this table entry belongs. |
| 1.3.6.1.4.1.232.16.3.4.1.1.5 | ColumncpqFcTapeCountersReWrites | read-only | mandatory | Tape Device Re-write count. This is the number of times blocks had to be re-written to the device. This value is maintained since the Tape Hardware Interface d… |
| 1.3.6.1.4.1.232.16.3.4.1.1.6 | ColumncpqFcTapeCountersReReads | read-only | mandatory | Tape Device Re-read count. This is the number of times blocks had to be re-read from the device. This value is maintained since the Tape Hardware Interface dri… |
| 1.3.6.1.4.1.232.16.3.4.1.1.7 | ColumncpqFcTapeCountersTotalErrors | read-only | mandatory | Tape Device Total Errors. This is the total number of read/write errors encountered. This value is maintained since the Tape Hardware Interface driver was load… |
| 1.3.6.1.4.1.232.16.3.4.1.1.8 | ColumncpqFcTapeCountersTotalUncorrectable | read-only | mandatory | Tape Device Total Uncorrectable Errors. This is the total number of read and write errors which could not be corrected. This value is maintained since the Tape… |
| 1.3.6.1.4.1.232.16.3.4.1.1.9 | ColumncpqFcTapeCountersTotalBytes | read-only | mandatory | Tape Device Total Bytes. This is the number total number of bytes read/written to the tape currently installed in the device. This value is reset whenever a ne… |
| 1.3.6.1.4.1.232.16.4 | NodecpqFcSwitchComponent | |||
| 1.3.6.1.4.1.232.16.4.1 | NodecpqFcSwitch | |||
| 1.3.6.1.4.1.232.16.4.1.1 | TablecpqFcSwitchTable | not-accessible | mandatory | Fibre Channel Switch Table. |
| 1.3.6.1.4.1.232.16.4.1.1.1 | RowcpqFcSwitchEntry | not-accessible | mandatory | Fibre Channel Switch Entry. |
| 1.3.6.1.4.1.232.16.4.1.1.1.1 | ColumncpqFcSwitchIndex | read-only | mandatory | Fibre Channel Switch Index. This value is a logical number whose meaning is OS dependent. Each switch has one unique controller number associated with it. |
| 1.3.6.1.4.1.232.16.4.1.1.1.2 | ColumncpqFcSwitchLocation | read-only | mandatory | Fibre Channel Switch Location. The following values are defined: other(1) The agent is unable to determine if the switch is internal or external to the storage… |
| 1.3.6.1.4.1.232.16.4.1.1.1.3 | ColumncpqFcSwitchChassisIndex | read-only | mandatory | Fibre Channel Switch Chassis Index. The chassis index indicates the storage system in which this switch resides. If the switch does not reside in a storage sys… |
| 1.3.6.1.4.1.232.16.4.1.1.1.4 | ColumncpqFcSwitchChassisSlot | read-only | mandatory | Fibre Channel Switch Chassis Slot. The chassis slot identifies the physical slot of the storage system in which this switch resides. If the switch does not res… |
| 1.3.6.1.4.1.232.16.4.1.1.1.5 | ColumncpqFcSwitchWorldWideNodeName | read-only | mandatory | Fibre Channel Switch World Wide Node Name. This value can be used to further identify a particular controller. If the world wide node name is not supported, th… |
| 1.3.6.1.4.1.232.16.4.1.1.1.6 | ColumncpqFcSwitchWorldWidePortName | read-only | mandatory | Fibre Channel Switch World Wide Port Name. This value can be used to further identify a particular controller. If the world wide port name is not supported, th… |
| 1.3.6.1.4.1.232.16.4.1.1.1.7 | ColumncpqFcSwitchIpAddress | read-only | mandatory | Fibre Channel Switch IP Address. This is the IP address of the switch. If the IP address is not supported, the agent will return a NULL string. |
| 1.3.6.1.4.1.232.16.4.1.1.1.8 | ColumncpqFcSwitchIpGateway | read-only | mandatory | Fibre Channel Switch IP Gateway. This is the IP gateway of the switch. If the IP gateway is not supported, the agent will return a NULL string. |
| 1.3.6.1.4.1.232.16.4.1.1.1.9 | ColumncpqFcSwitchIpSubnet | read-only | mandatory | Fibre Channel Switch IP Subnet. This is the IP subnet of the switch. If the IP subnet is not supported, the agent will return a NULL string. |
| 1.3.6.1.4.1.232.16.4.1.1.1.10 | ColumncpqFcSwitchName | read-only | mandatory | Fibre Channel Switch Name. This is the name of the switch. If the name is not supported, the agent will return a NULL string. |
| 1.3.6.1.4.1.232.16.4.1.1.1.11 | ColumncpqFcSwitchNetworkLinkStatus | read-only | mandatory | Fibre Channel Switch Network Link Status. The following values are defined: other(1) The agent is unable to determine the status of the switch network link. ac… |
| 1.3.6.1.4.1.232.16.4.1.1.1.12 | ColumncpqFcSwitchFibreConnectStatus | read-only | mandatory | Fibre Channel Switch Fibre Channel Connection Status. The following values are defined: other(1) The agent is unable to determine the status of the switch fibr… |
| 1.3.6.1.4.1.232.16.4.1.1.1.13 | ColumncpqFcSwitchFWRev | read-only | mandatory | Fibre Channel Switch Firmware Revision. This is firmware revision level of the Fibre channel switch. |
| 1.3.6.1.4.1.232.16001 | NodecpqFcaLogDrvStatusChange | External Array Logical Drive Status Change. This trap signifies that the agent has detected a change in the status of a External Array logical drive. The varia… | ||
| 1.3.6.1.4.1.232.16002 | NodecpqFcaSpareStatusChange | External Array Spare Drive Status Change. This trap signifies that the agent has detected a change in the status of a External Array spare drive. The variable … | ||
| 1.3.6.1.4.1.232.16003 | NodecpqFcaPhyDrvStatusChange | External Array Physical Drive Status Change. This trap signifies that the agent has detected a change in the status of a physical drive. The variable cpaFcaPhy… | ||
| 1.3.6.1.4.1.232.16004 | NodecpqFcaAccelStatusChange | External Array Accelerator Board Status Change. This trap signifies that the agent has detected a change in the cpqFcaAccelStatus of a Array Accelerator Cache … | ||
| 1.3.6.1.4.1.232.16005 | NodecpqFcaAccelBadDataTrap | External Array Accelerator Board Bad Data. This trap signifies that the agent has detected a Array Accelerator Cache Board that has lost battery power. If data… | ||
| 1.3.6.1.4.1.232.16006 | NodecpqFcaAccelBatteryFailed | External Array Accelerator Board Battery Failed. This trap signifies that the agent has detected a battery failure associated with the Array Accelerator Cache … | ||
| 1.3.6.1.4.1.232.16007 | NodecpqFcaCntlrStatusChange | External Array Controller Status Change. This trap signifies that the agent has detected a change in the status of a External Array Controller. The variable cp… | ||
| 1.3.6.1.4.1.232.16008 | NodecpqFcTapeCntlrStatusChange | Fibre Channel Tape Controller Status Change. This trap signifies that the agent has detected a change in the status of a Fiber Channel Tape Controller. The var… | ||
| 1.3.6.1.4.1.232.16009 | NodecpqFcTapeLibraryStatusChange | Fibre Channel Tape Library Status Change. This trap signifies that the agent has detected a change in the status of a Fiber Channel Tape library. The variable … | ||
| 1.3.6.1.4.1.232.16010 | NodecpqFcTapeLibraryDoorStatusChange | Fibre Channel Tape Library Door Status Change. This trap signifies that the agent has detected a change in the door status of a Fiber Channel Tape library. The… | ||
| 1.3.6.1.4.1.232.16011 | NodecpqFcTapeDriveStatusChange | Fibre Channel Tape Drive Status Change. This trap signifies that the agent has detected a change in the status of a Fiber Channel Tape Drive. The variable cpqF… | ||
| 1.3.6.1.4.1.232.16012 | NodecpqFcTapeDriveCleaningRequired | Fibre Channel Tape Drive Cleaning Required trap. The agent has detected a tape drive that needs to have a cleaning tape inserted and run. This will cause the t… | ||
| 1.3.6.1.4.1.232.16013 | NodecpqFcTapeDriveCleanTapeReplace | Fibre Channel Tape Drive Cleaning Tape Needs Replacing. The agent has detected that an autoloader tape unit has a cleaning tape that has been fully used and th… | ||
| 1.3.6.1.4.1.232.16014 | NodecpqFcaCntlrActive | External Array Redundant Controller Active. This trap signifies that the Storage Agent has detected that a backup array controller in a duplexed pair has switc… | ||
| 1.3.6.1.4.1.232.16015 | NodecpqFcaHostCntlrStatusChange | Fibre Channel Host Controller Status Change. This trap signifies that the Insight Agent has detected a change in the status of a Fibre Channel Host Controller.… | ||
| 1.3.6.1.4.1.232.16016 | NodecpqFca2PhyDrvStatusChange | External Array Physical Drive Status Change. This trap signifies that the agent has detected a change in the status of a physical drive. The variable cpaFcaPhy… | ||
| 1.3.6.1.4.1.232.16017 | NodecpqFca2AccelStatusChange | External Array Accelerator Board Status Change. This trap signifies that the agent has detected a change in the status of a Array Accelerator Cache Board. The … | ||
| 1.3.6.1.4.1.232.16018 | NodecpqFca2AccelBadDataTrap | External Array Accelerator Board Bad Data. This trap signifies that the agent has detected a Array Accelerator Cache Board that has lost battery power. If data… | ||
| 1.3.6.1.4.1.232.16019 | NodecpqFca2AccelBatteryFailed | External Array Accelerator Board Battery Failed. This trap signifies that the agent has detected a battery failure associated with the Array Accelerator Cache … | ||
| 1.3.6.1.4.1.232.16020 | NodecpqFca2CntlrStatusChange | External Array Controller Status Change. This trap signifies that the agent has detected a change in the status of a External Array Controller. The variable cp… | ||
| 1.3.6.1.4.1.232.16021 | NodecpqFca2HostCntlrStatusChange | Fibre Channel Host Controller Status Change. This trap signifies that the agent has detected a change in the status of a Fibre Channel Host Controller. The var… | ||
| 1.3.6.1.4.1.232.16022 | NodecpqExtArrayLogDrvStatusChange | External Array Logical Drive Status Change. This trap signifies that the agent has detected a change in the status of an External Array logical drive. The vari… | ||
| 1.3.6.1.4.1.232.16023 | NodecpqExtTapeDriveStatusChange | External Tape Drive Status Change. This trap signifies that the agent has detected a change in the status of an External Tape Drive. The variable cpqFcTapeDriv… | ||
| 1.3.6.1.4.1.232.16024 | NodecpqExtTapeDriveCleaningRequired | External Tape Drive Cleaning Required. The agent has detected a tape drive that needs to have a cleaning tape inserted and run. This will cause the tape drive … | ||
| 1.3.6.1.4.1.232.16025 | NodecpqExtTapeDriveCleanTapeReplace | External Tape Drive Cleaning Tape Needs Replacing. The agent has detected that an autoloader tape unit has a cleaning tape that has been fully used and therefo… | ||
| 1.3.6.1.4.1.232.16026 | NodecpqExtTapeLibraryStatusChange | External Tape Library Status Change. This trap signifies that the agent has detected a change in the status of an External Tape library. The variable cpqFcTape… | ||
| 1.3.6.1.4.1.232.16027 | NodecpqExtTapeLibraryDoorStatusChange | External Tape Library Door Status Change. This trap signifies that the agent has detected a change in the door status of an External Tape library. The variable… | ||
| 1.3.6.1.4.1.232.16028 | NodecpqFca3HostCntlrStatusChange | Fibre Channel Host Controller Status Change. This trap signifies that the agent has detected a change in the status of a Fibre Channel Host Controller. The var… |