CPQN5226A-MIB
154 objects
No module-level DESCRIPTION found.
Imported Objects
| CPQNUNIF-MIB | CpqnRowStatus |
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter enterprises |
| RFC1213-MIB | DisplayString ifIndex |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.232 | Nodecompaq | |||
| 1.3.6.1.4.1.232.101 | Nodecompaq-dallas-npd | |||
| 1.3.6.1.4.1.232.101.2 | NodeswitchedMedia | |||
| 1.3.6.1.4.1.232.101.2.2 | Nodecpqn52nn | |||
| 1.3.6.1.4.1.232.101.2.2.1 | Nodecpqn52nnOIDInfo | |||
| 1.3.6.1.4.1.232.101.2.2.1 | Nodecpqn52nnPowerSupplyStatusTrap | A cpqn52nnPowerSupplyStatus Trap is sent whenever a power supply changes state from voltage-ok to voltage-not-ok or vice versa. | ||
| 1.3.6.1.4.1.232.101.2.2.1.1 | Nodecpqn5226 | |||
| 1.3.6.1.4.1.232.101.2.2.1.3 | Nodecpqn5226A | |||
| 1.3.6.1.4.1.232.101.2.2.2 | Nodecpqn52nnModuleInfo | |||
| 1.3.6.1.4.1.232.101.2.2.2 | Nodecpqn52nnUplinkInsertedTrap | The cpqn52nnMepInserted trap is sent whenever a MEP, that represents a physical interface, is added. | ||
| 1.3.6.1.4.1.232.101.2.2.2.1 | Scalarcpqn52nnVT100ScreenRefresh | read-write | mandatory | DURABLE: This object will determine the rate, in seconds, at which the VT100 screen will refresh the automatic fields (e.g., statistics). The default value wil… |
| 1.3.6.1.4.1.232.101.2.2.2.2 | Scalarcpqn52nnBooterWriteCycles | read-only | mandatory | This object will allow the user to see the number of erase/writes that have been made to the Booter firmware sectors on the FLASH PROM chip. |
| 1.3.6.1.4.1.232.101.2.2.2.3 | Scalarcpqn52nnRuntimeWriteCycles | read-only | mandatory | This object will allow the user to see the number of erase/writes that have been made to the Runtime firmware sectors on the FLASH PROM chip. |
| 1.3.6.1.4.1.232.101.2.2.2.4 | Scalarcpqn52nnSwitchModeType | read-write | mandatory | DURABLE: This object will determine the operational mode of the switch. The default will be store-and-forward(1). Fragment-free is not supported on 5226 nor 52… |
| 1.3.6.1.4.1.232.101.2.2.2.5 | Scalarcpqn52nnCreateTimeout | read-write | mandatory | DURABLE: The minimum number of 5 minute intervals a table entry can have a status of underCreate before the agent may delete the object. The default value will… |
| 1.3.6.1.4.1.232.101.2.2.2.6 | Tablecpqn52nnPowerSupplyTable | not-accessible | mandatory | A table of system power supply specific information. |
| 1.3.6.1.4.1.232.101.2.2.2.6.1 | Rowcpqn52nnPowerSupplyEntry | not-accessible | mandatory | A list of information for every power supply installed |
| 1.3.6.1.4.1.232.101.2.2.2.6.1.1 | Columncpqn52nnPsIndex | read-only | mandatory | A unique value for each power supply. |
| 1.3.6.1.4.1.232.101.2.2.2.6.1.2 | Columncpqn52nnPsStatus | read-only | mandatory | The status of the power supply. The value good(1) is returned if the power supply identified by cpqn52nnPSIndex is running properly. The value bad(2) is return… |
| 1.3.6.1.4.1.232.101.2.2.3 | Nodecpqn52nnMemoryInfo | |||
| 1.3.6.1.4.1.232.101.2.2.3 | Nodecpqn52nnUplinkRemovedTrap | The cpqn52nnMepRemoved trap is sent whenever a MEP, that represents a physical interface, is removed. | ||
| 1.3.6.1.4.1.232.101.2.2.3.1 | Nodecpqn52nnHashInfo | |||
| 1.3.6.1.4.1.232.101.2.2.3.1.1 | Scalarcpqn52nnHashTableSize | read-write | mandatory | DURABLE: The number of address table entries, in 1024 increments, allowed for the switch. NOTE that a smaller size table will increase the likelihood of broadc… |
| 1.3.6.1.4.1.232.101.2.2.3.2 | Nodecpqn52nnRmonMemory | |||
| 1.3.6.1.4.1.232.101.2.2.3.2.1 | Scalarcpqn52nnMaxMemory | read-only | mandatory | Kbytes of memory that can be used for RMON. Actually this number does not include some overhead needed to support the software. This number should be set in th… |
| 1.3.6.1.4.1.232.101.2.2.3.2.2 | Scalarcpqn52nnMemAllocFailure | read-only | mandatory | The time of the last memory allocation failure that resulted from no more physical memory available in the agent. This value is in seconds |
| 1.3.6.1.4.1.232.101.2.2.3.2.3 | Scalarcpqn52nnRmonMemoryCeiling | read-write | mandatory | DURABLE: Kbytes of memory RMON code may use, not counting any overhead. |
| 1.3.6.1.4.1.232.101.2.2.3.2.4 | Scalarcpqn52nnStatisticsMemoryCeiling | read-write | mandatory | DURABLE: Kbytes of memory that the RMON statistics group may use. |
| 1.3.6.1.4.1.232.101.2.2.3.2.5 | Scalarcpqn52nnHistoryMemoryCeiling | read-write | mandatory | DURABLE: Kbytes of memory that the RMON history group may use. |
| 1.3.6.1.4.1.232.101.2.2.3.2.6 | Scalarcpqn52nnAlarmMemoryCeiling | read-write | mandatory | DURABLE: Kbytes of memory that the RMON alarm group may use. |
| 1.3.6.1.4.1.232.101.2.2.3.2.7 | Scalarcpqn52nnEventMemoryCeiling | read-write | mandatory | DURABLE: Kbytes of memory that the RMON event group may use. |
| 1.3.6.1.4.1.232.101.2.2.3.2.8 | Scalarcpqn52nnRmonMemoryUsed | read-only | mandatory | Kbytes of memory used by RMON, rounded up. |
| 1.3.6.1.4.1.232.101.2.2.3.2.9 | Scalarcpqn52nnStatisticsMemoryUsed | read-only | mandatory | Kbytes of memory that the RMON statistics group has used. |
| 1.3.6.1.4.1.232.101.2.2.3.2.10 | Scalarcpqn52nnHistoryMemoryUsed | read-only | mandatory | Kbytes of memory that the RMON history group has used. |
| 1.3.6.1.4.1.232.101.2.2.3.2.11 | Scalarcpqn52nnAlarmMemoryUsed | read-only | mandatory | Kbytes of memory that the RMON alarm group has used. |
| 1.3.6.1.4.1.232.101.2.2.3.2.12 | Scalarcpqn52nnEventMemoryUsed | read-only | mandatory | Kbytes of memory that the RMON event group has used. |
| 1.3.6.1.4.1.232.101.2.2.3.3 | Nodecpqn52nnMemoryThreshold | |||
| 1.3.6.1.4.1.232.101.2.2.3.3.1 | Scalarcpqn52nnMaxPktMemory | read-only | mandatory | Kbytes of memory that can be used for Packet Memory. |
| 1.3.6.1.4.1.232.101.2.2.3.3.2 | Scalarcpqn52nnGlobalMemThreshTrapEnable | read-write | mandatory | DURABLE: Enable Traps for all thresholding entries in the Global Memory group of objects. The default value is disabled. |
| 1.3.6.1.4.1.232.101.2.2.3.3.3 | Scalarcpqn52nnBcastMemThreshEnable | read-write | mandatory | DURABLE: Enable thresholding for the Broadcast packet count. The default value is disabled. |
| 1.3.6.1.4.1.232.101.2.2.3.3.4 | Scalarcpqn52nnBcastPktCeiling | read-write | mandatory | DURABLE: Value in 256 packet increments of the falling threshold of the maximum number of broadcast packets allowed in packet buffer memory. |
| 1.3.6.1.4.1.232.101.2.2.3.3.5 | Scalarcpqn52nnBcastHysteresisCtl | read-write | mandatory | DURABLE: Number of packets that when added to the Bcast packet ceiling produces the Rising Threshold value of the maximum number of broadcast packets allowed i… |
| 1.3.6.1.4.1.232.101.2.2.3.3.6 | Scalarcpqn52nnBcastPktCnt | read-only | mandatory | Indicator of many broadcast packets are actually in packet buffer memory. |
| 1.3.6.1.4.1.232.101.2.2.3.3.7 | Scalarcpqn52nnBcastCongestionStatus | read-only | mandatory | Indicator of broadcast packet congestion. When congested, the number of broadcast packets in packet buffer memory has exceeded the rising threshold, but has no… |
| 1.3.6.1.4.1.232.101.2.2.3.3.8 | Tablecpqn52nnPortMemThreshTable | not-accessible | mandatory | This table defines something. |
| 1.3.6.1.4.1.232.101.2.2.3.3.8.1 | Rowcpqn52nnPortMemThreshEntry | not-accessible | mandatory | This table has one entry for each port. The index into the table is cpqn52nnPortThreshIfIndex. |
| 1.3.6.1.4.1.232.101.2.2.3.3.8.1.1 | Columncpqn52nnPortThreshIfIndex | read-only | mandatory | The Interface Index as represented in MIB-II. |
| 1.3.6.1.4.1.232.101.2.2.3.3.8.1.2 | Columncpqn52nnPortTxPktThreshEnable | read-write | mandatory | DURABLE: Enables or disabled transmit packet thresholding on a per port basis. |
| 1.3.6.1.4.1.232.101.2.2.3.3.8.1.3 | Columncpqn52nnPortTxPktCongestionStatus | read-only | mandatory | Indicator of port transmit packet congestion. When congested, the number of transmit packets in packet buffer memory for the port has exceeded the rising thres… |
| 1.3.6.1.4.1.232.101.2.2.3.3.8.1.4 | Columncpqn52nnPortTxPktCnt | read-only | mandatory | Indicator of how many transmit packets for the port are actually in packet buffer memory. |
| 1.3.6.1.4.1.232.101.2.2.3.3.8.1.5 | Columncpqn52nnPortTxPktCeiling | read-write | mandatory | DURABLE: Value in 256 packet increments of the falling threshold of the maximum number of transmit packets allowed for the port in packet buffer memory. |
| 1.3.6.1.4.1.232.101.2.2.3.3.8.1.6 | Columncpqn52nnPortTxPktHysteresisCtl | read-write | mandatory | DURABLE: Number of packets that when added to the port's transmit packet ceiling produces the Rising Threshold value of the maximum number of transmit packets … |
| 1.3.6.1.4.1.232.101.2.2.3.3.8.1.7 | Columncpqn52nnPortRxMemThreshEnable | read-write | mandatory | DURABLE: Enables or disables receive memory thresholding on a per port basis. |
| 1.3.6.1.4.1.232.101.2.2.3.3.8.1.8 | Columncpqn52nnPortRxMemCongestionStatus | read-only | mandatory | Indicator of port receive memory congestion. When congested, the amount of receive packet buffer memory used by the port has exceeded the rising threshold, but… |
| 1.3.6.1.4.1.232.101.2.2.3.3.8.1.9 | Columncpqn52nnPortRxMemSectorCnt | read-only | mandatory | Indicator of how amount Packet Receive memory, in 2Kbyte increments, is actually being used by the port. |
| 1.3.6.1.4.1.232.101.2.2.3.3.8.1.10 | Columncpqn52nnPortRxMemCeiling | read-write | mandatory | DURABLE: Value in 32Kbyte increments of the falling threshold of the maximum receive packet memory allowed for the port in packet buffer memory. |
| 1.3.6.1.4.1.232.101.2.2.3.3.8.1.11 | Columncpqn52nnPortRxMemHysteresisCtl | read-write | mandatory | DURABLE: Value in 2Kbyte increments that when added to the port's receive memory ceiling produces the Rising Threshold value of the maximum receive memory allo… |
| 1.3.6.1.4.1.232.101.2.2.3.3.8.1.12 | Columncpqn52nnPortCongestionTrapEnable | read-write | mandatory | DURABLE: Enables or disabled traps due to congestion states for any Port. |
| 1.3.6.1.4.1.232.101.2.2.3.4 | Nodecpqn52nnDramInfo | |||
| 1.3.6.1.4.1.232.101.2.2.3.4.1 | Tablecpqn52nnDramTable | not-accessible | mandatory | This table defines the unit's Dram information. |
| 1.3.6.1.4.1.232.101.2.2.3.4.1.1 | Rowcpqn52nnDramEntry | not-accessible | mandatory | This table has one entry for each Dram component. The index into the table is cpqn52nnDramIndex. |
| 1.3.6.1.4.1.232.101.2.2.3.4.1.1.1 | Columncpqn52nnDramIndex | read-only | mandatory | A simple index representing the area using the DRAM. |
| 1.3.6.1.4.1.232.101.2.2.3.4.1.1.2 | Columncpqn52nnDramSize | read-only | mandatory | Size of DRAM being used, in KBytes. |
| 1.3.6.1.4.1.232.101.2.2.3.4.1.1.3 | Columncpqn52nnDramType | read-only | mandatory | Type of DRAM being used. |
| 1.3.6.1.4.1.232.101.2.2.3.4.1.1.4 | Columncpqn52nnDramSpeed | read-only | mandatory | Speed of DRAM being used. |
| 1.3.6.1.4.1.232.101.2.2.4 | Nodecpqn52nnBusMonRisingThresholdTrap | The SNMP trap that is generated when an alarm entry crosses its rising threshold and generates an event that is configured for sending SNMP traps. | ||
| 1.3.6.1.4.1.232.101.2.2.4 | Nodecpqn52nnPortInfo | |||
| 1.3.6.1.4.1.232.101.2.2.4.1 | Tablecpqn52nnPortStatusTable | not-accessible | mandatory | This table defines certain Port Level parameters for each port. |
| 1.3.6.1.4.1.232.101.2.2.4.1.1 | Rowcpqn52nnPortStatusEntry | not-accessible | mandatory | This table has one entry for each port. The index into the table is cpqn52nnPortStatusId. |
| 1.3.6.1.4.1.232.101.2.2.4.1.1.1 | Columncpqn52nnPortIfIndex | read-only | mandatory | Switch interface number that corresponds to the interface in MIB-II. |
| 1.3.6.1.4.1.232.101.2.2.4.1.1.2 | Columncpqn52nnPortIfMauIndex | read-only | mandatory | Uniquely identifies the port in the CPQN52nn unit for which additional info is being obtained. |
| 1.3.6.1.4.1.232.101.2.2.4.1.1.3 | Columncpqn52nnPortName | read-write | mandatory | DURABLE: User defined name for port. |
| 1.3.6.1.4.1.232.101.2.2.4.1.1.4 | Columncpqn52nnPortType | read-only | mandatory | This object identifies all possible port types. Note that unknown Port Types are represented by the value 1000. |
| 1.3.6.1.4.1.232.101.2.2.4.1.1.5 | Columncpqn52nnMdiMdixStatus | read-only | mandatory | This object identifies all possible port types. |
| 1.3.6.1.4.1.232.101.2.2.4.1.1.6 | Columncpqn52nnMdiMdixEnable | read-write | mandatory | This object identifies all possible port types. |
| 1.3.6.1.4.1.232.101.2.2.4.2 | Tablecpqn52nnPortMonitorTable | not-accessible | mandatory | This table defines monitor information. |
| 1.3.6.1.4.1.232.101.2.2.4.2.1 | Rowcpqn52nnPortMonitorEntry | not-accessible | mandatory | This table can be empty. Entries can be added as needed. The index into the table is cpqn52nnPortMonitorIndex. |
| 1.3.6.1.4.1.232.101.2.2.4.2.1.1 | Columncpqn52nnPortMonitorIndex | read-only | mandatory | A simple index represnting the number of the entry being examined. |
| 1.3.6.1.4.1.232.101.2.2.4.2.1.2 | Columncpqn52nnPortMonitorRowStatus | read-write | mandatory | DURABLE: The status of this row entry. Rows are added to this table using 'row sets'. When a row is added, this object must be set to row-valid(1). To delete a… |
| 1.3.6.1.4.1.232.101.2.2.4.2.1.3 | Columncpqn52nnPortMonitorIfIndex | read-write | mandatory | DURABLE An index based on the interface index in MIB-II. This will represent the interface to be used to monitor the data of others as defined by cpqn52nnPortM… |
| 1.3.6.1.4.1.232.101.2.2.4.2.1.4 | Columncpqn52nnPortMonitoredIfMap | read-write | mandatory | DURABLE: A bitmap indicating the ports whose data is being monitored. The bits used to represent the are the same as the IfIndex representation of the ports. e… |
| 1.3.6.1.4.1.232.101.2.2.4.2.1.5 | Columncpqn52nnPortMonitoredDataType | read-write | mandatory | DURABLE: The type of data to be monitored by the monitor port. Selecting TX or RX means that only the TX or RX data will be monitored by the monitor port. |
| 1.3.6.1.4.1.232.101.2.2.4.3 | Tablecpqn52nnPortBondingTable | not-accessible | mandatory | This table defines uplink bonding information. |
| 1.3.6.1.4.1.232.101.2.2.4.3.1 | Rowcpqn52nnPortBondingEntry | not-accessible | mandatory | The index into the table is cpqn52nnBondIndex. The table can be empty. |
| 1.3.6.1.4.1.232.101.2.2.4.3.1.1 | Columncpqn52nnBondIndex | read-only | mandatory | A simple index representing the entry number. |
| 1.3.6.1.4.1.232.101.2.2.4.3.1.2 | Columncpqn52nnBondRowStatus | read-write | mandatory | DURABLE: The status of this row entry. Rows are added to this table using 'row sets'. When a row is added, this object must be set to row-valid(1). To delete a… |
| 1.3.6.1.4.1.232.101.2.2.4.3.1.3 | Columncpqn52nnBondMap | read-write | mandatory | DURABLE: A bitmap indicating the uplink ports that are bonded together. The bits used to represent the uplink ports are the same as the If Index representation… |
| 1.3.6.1.4.1.232.101.2.2.5 | Nodecpqn52nnBusMonFallingThresholdTrap | The SNMP trap that is generated when an alarm entry crosses its falling threshold and generates an event that is configured for sending SNMP traps. | ||
| 1.3.6.1.4.1.232.101.2.2.5 | Nodecpqn52nnIfStatusInfo | |||
| 1.3.6.1.4.1.232.101.2.2.5.1 | Tablecpqn52nnIfStatusTable | not-accessible | mandatory | This table defines certain switch interface level parameters for each interface. |
| 1.3.6.1.4.1.232.101.2.2.5.1.1 | Rowcpqn52nnIfStatusEntry | not-accessible | mandatory | This table has one entry for each switch interface. The index into the table is cpqn52nnIfStatusIfIndex. |
| 1.3.6.1.4.1.232.101.2.2.5.1.1.1 | Columncpqn52nnIfStatusIfIndex | read-only | mandatory | The value of the instance of the ifIndex object, defined in MIB-II, for this switch interface. |
| 1.3.6.1.4.1.232.101.2.2.5.1.1.2 | Columncpqn52nnIfStatusIfType | read-only | mandatory | The type of device used for this switch interface. |
| 1.3.6.1.4.1.232.101.2.2.5.1.1.3 | Columncpqn52nnIfStpStatus | read-write | mandatory | When enabled(1), this interface will participate in Spanning Tree activities. When disabled(2), this interface will not participate in the Spanning Tree algori… |
| 1.3.6.1.4.1.232.101.2.2.5.1.1.4 | Columncpqn52nnIfResetStatus | read-write | mandatory | This object will allow the user to physically reset an interface on the CPQN52nn. The advantage over a general reset is that the other interfaces are left unaf… |
| 1.3.6.1.4.1.232.101.2.2.5.1.1.5 | Columncpqn52nnIfLearningStatus | read-write | mandatory | When enabled(1), this interface can enter the learning state. When disabled(2), this interface is not allowed to enter the learning state. When disabled(2), Sp… |
| 1.3.6.1.4.1.232.101.2.2.5.1.1.6 | Columncpqn52nnIfAgingStatus | read-write | mandatory | When enabled(1), this interface ages learned entries in the Address Filter/Forward table. When disabled(2), this interface does not age entries in the address … |
| 1.3.6.1.4.1.232.101.2.2.5.1.1.7 | Columncpqn52nnIfAgingTime | read-write | mandatory | The timeout period in seconds for aging out dynamically learned forwarding information on the switch interface. DURABLE |
| 1.3.6.1.4.1.232.101.2.2.5.1.1.8 | Columncpqn52nnIfSwitchModeSrcStatus | read-only | mandatory | The switch mode for this interface when it is the Source in a switch transfer. |
| 1.3.6.1.4.1.232.101.2.2.5.1.1.9 | Columncpqn52nnIfSwitchModeDestStatus | read-only | mandatory | The switch mode for this interface when it is the Destination in a switch transfer. |
| 1.3.6.1.4.1.232.101.2.2.5.1.1.10 | Columncpqn52nnIfSwitchModeSrc | read-write | mandatory | DURABLE: The switch mode for this interface when it is the Source in a switch transfer. The default case is store-and-forward(1). |
| 1.3.6.1.4.1.232.101.2.2.5.1.1.11 | Columncpqn52nnIfSwitchModeDest | read-write | mandatory | DURABLE: The switch mode for this interface when it is the Destination in a switch transfer. The default case is store-and-forward(1). |
| 1.3.6.1.4.1.232.101.2.2.5.1.1.12 | Columncpqn52nnIfArbPriority | read-write | mandatory | DURABLE: The priority mechanism used for arbitration. The possible arbitration states and values are as follows: VALUE ARBITRATION 0 First-Come-First-Served al… |
| 1.3.6.1.4.1.232.101.2.2.6 | Nodecpqn52nnIfStatsInfo | |||
| 1.3.6.1.4.1.232.101.2.2.6.1 | Nodecpqn52nnQuadCascade | |||
| 1.3.6.1.4.1.232.101.2.2.6.1.1 | Tablecpqn52nnQuadIfTable | not-accessible | mandatory | This table provides information, on a per port basis, for the Quad Cascade devices. |
| 1.3.6.1.4.1.232.101.2.2.6.1.1.1 | Rowcpqn52nnQuadIfEntry | not-accessible | mandatory | This table has one entry for each Port. The indices into the table are cpqn52nnQuadIfIndex. |
| 1.3.6.1.4.1.232.101.2.2.6.1.1.1.1 | Columncpqn52nnQuadIfIndex | read-only | mandatory | An index representing the interface as in MIN-II. |
| 1.3.6.1.4.1.232.101.2.2.6.1.1.1.2 | Columncpqn52nnQuadIfAlignFcsErrors | read-only | mandatory | Shows the number of packets received between 64 and 1518 bytes in length, but were not an integral number of bytes in length, or had a bad Frame Check Sequence. |
| 1.3.6.1.4.1.232.101.2.2.6.1.1.1.3 | Columncpqn52nnQuadIfTxRunts | read-only | mandatory | Shows the number of packets transmitted that were less than 64 bytes in length. |
| 1.3.6.1.4.1.232.101.2.2.6.1.1.1.4 | Columncpqn52nnQuadIfRxRunts | read-only | mandatory | Shows the number of packets received that were less than 64 bytes long that were an integral number of bytes long. |
| 1.3.6.1.4.1.232.101.2.2.6.1.1.1.5 | Columncpqn52nnQuadIfTotalCollisions | read-only | mandatory | Shows the number of collision packets, single and multiple. |
| 1.3.6.1.4.1.232.101.2.2.6.1.2 | Tablecpqn52nnQuadIfCfgTable | not-accessible | mandatory | This table provides information, on a per port basis, for the Quad Cascade devices. |
| 1.3.6.1.4.1.232.101.2.2.6.1.2.1 | Rowcpqn52nnQuadIfCfgEntry | not-accessible | mandatory | This table has one entry for each Port. The index into the table is cpqn52nnQuadIfIndex. |
| 1.3.6.1.4.1.232.101.2.2.6.1.2.1.1 | Columncpqn52nnQuadIfCfgIndex | read-only | mandatory | An index representing the interface as in MIN-II. |
| 1.3.6.1.4.1.232.101.2.2.6.1.2.1.2 | Columncpqn52nnQuadIfCfgMauIndex | read-only | mandatory | |
| 1.3.6.1.4.1.232.101.2.2.6.1.2.1.3 | Columncpqn52nnQuadIfCfgLinkForce | read-write | mandatory | DURABLE: When enabled, this object allows the port to transmit even if link integrity fails. |
| 1.3.6.1.4.1.232.101.2.2.6.1.2.1.4 | Columncpqn52nnQuadIfCfgLinkPolarityCorrect | read-write | mandatory | DURABLE: When enabled, this allows the port to correct for inverted polarity on the twisted pair interface, if an inverted polarity condition exists on that po… |
| 1.3.6.1.4.1.232.101.2.2.6.2 | Nodecpqn52nnTlan | |||
| 1.3.6.1.4.1.232.101.2.2.6.2.1 | Tablecpqn52nnTlanIfTable | not-accessible | mandatory | This table provides information, on a per port basis, for the Tlan devices. |
| 1.3.6.1.4.1.232.101.2.2.6.2.1.1 | Rowcpqn52nnTlanIfEntry | not-accessible | mandatory | This table has one entry for each Port. The index into the table is cpqn52nnTlanIfIndex. |
| 1.3.6.1.4.1.232.101.2.2.6.2.1.1.1 | Columncpqn52nnTlanIfIndex | read-only | mandatory | A simple index representing the Port in the table representing the IfIndex in MIB-II. |
| 1.3.6.1.4.1.232.101.2.2.6.2.1.1.2 | Columncpqn52nnTlanIfTxGoodFrms | read-only | mandatory | Shows the number of packets transmitted that were good (no errors). |
| 1.3.6.1.4.1.232.101.2.2.6.2.1.1.3 | Columncpqn52nnTlanIfRxUndersizeFrms | read-only | mandatory | Shows the number of packets that were |
| 1.3.6.1.4.1.232.101.2.2.6.2.1.1.4 | Columncpqn52nnTlanIfRxOverruns | read-only | mandatory | Shows the number of packets received that were |
| 1.3.6.1.4.1.232.101.2.2.6.2.1.1.5 | Columncpqn52nnTlanIfRxAlignSymbolErrs | read-only | mandatory | Shows the number of packets received that had either Alignment errors or Symbol errors. |
| 1.3.6.1.4.1.232.101.2.2.7 | Nodecpqb52nnGlobalBcastMemCongestionTrap | The SNMP trap that is generated when an alarm entry crosses its rising or falling threshold and generates an event that is configured for sending SNMP traps. | ||
| 1.3.6.1.4.1.232.101.2.2.7 | Nodecpqn52nnSwitchStatsInfo | |||
| 1.3.6.1.4.1.232.101.2.2.7.1 | Nodecpqn52nnHashMemory | |||
| 1.3.6.1.4.1.232.101.2.2.7.1.1 | Scalarcpqn52nnHashStaticNum | read-only | mandatory | A count of static entries in this switch interface's Address Forwarding/Filtering mechanism. |
| 1.3.6.1.4.1.232.101.2.2.7.1.2 | Scalarcpqn52nnHashDynamicNum | read-only | mandatory | A count of dynamic entries in this switch interface's Address Forwarding/Filtering mechanism. |
| 1.3.6.1.4.1.232.101.2.2.7.1.3 | Scalarcpqn52nnHashChainNum | read-only | mandatory | A count of indices in the Address Filter/Forward mechanism's hash table which have more than one MAC Address entry. |
| 1.3.6.1.4.1.232.101.2.2.7.1.4 | Scalarcpqn52nnHashChainLength | read-only | mandatory | A count of the number of MAC Address entries in the longest chain in the Address Filter/Forward mechanism's hash table. |
| 1.3.6.1.4.1.232.101.2.2.7.2 | Nodecpqn52nnDropPkts | |||
| 1.3.6.1.4.1.232.101.2.2.7.2.1 | Scalarcpqn52nnDropsWholeMemoryCtr | read-only | mandatory | Counter to indicate the total number of packets dropped due to memory overflow. This is exclusive of the other counters in this section. |
| 1.3.6.1.4.1.232.101.2.2.7.2.2 | Scalarcpqn52nnDropsBcastMemoryCtr | read-only | mandatory | Counter to indicate the total number of packets dropped due to memory overflow in the area handling Broadcast packets only. This is exclusive of the other coun… |
| 1.3.6.1.4.1.232.101.2.2.7.2.3 | Scalarcpqn52nnDropsIfMemoryCtr | read-only | mandatory | Counter to indicate the total number of packets dropped due to memory overflow in the area handling interface TX/RX packets only. This is exclusive of the othe… |
| 1.3.6.1.4.1.232.101.2.2.8 | Nodecpqb52nnPortTxPktCongestionTrap | The SNMP trap that is generated when an alarm entry crosses its rising or falling threshold and generates an event that is configured for sending SNMP traps. | ||
| 1.3.6.1.4.1.232.101.2.2.8 | Nodecpqn52nnBusMonitorInfo | |||
| 1.3.6.1.4.1.232.101.2.2.8.1 | Tablecpqn52nnBusMonTable | not-accessible | mandatory | This table defines the unit's utilization information. |
| 1.3.6.1.4.1.232.101.2.2.8.1.1 | Rowcpqn52nnBusMonEntry | not-accessible | mandatory | This table has one entry for each bus component. The index into the table is cpqn52nnBusMonIndex. |
| 1.3.6.1.4.1.232.101.2.2.8.1.1.1 | Columncpqn52nnBusMonIndex | read-only | mandatory | A simple index representing the entry in the table. |
| 1.3.6.1.4.1.232.101.2.2.8.1.1.2 | Columncpqn52nnBusMonRowStatus | read-write | mandatory | DURABLE: The status of this alarm entry. |
| 1.3.6.1.4.1.232.101.2.2.8.1.1.3 | Columncpqn52nnBusMonBusType | read-write | mandatory | DURABLE: The type of bus to be monitored. |
| 1.3.6.1.4.1.232.101.2.2.8.1.1.4 | Columncpqn52nnBusMonDataType | read-write | mandatory | DURABLE: The type of data to be monitored. |
| 1.3.6.1.4.1.232.101.2.2.8.1.1.5 | Columncpqn52nnBusMonPktType | read-write | mandatory | DURABLE: The type of data to be monitored. |
| 1.3.6.1.4.1.232.101.2.2.8.1.1.6 | Columncpqn52nnBusMonSwitchModeType | read-write | mandatory | DURABLE: The type of packets monitored for data. |
| 1.3.6.1.4.1.232.101.2.2.8.1.1.7 | Columncpqn52nnBusMonCurrentUtilization | read-only | mandatory | Utilization of the selected port calculated as a percentage of the total bandwidth available for the bus. |
| 1.3.6.1.4.1.232.101.2.2.8.1.1.8 | Columncpqn52nnBusMonPeakUtilization | read-only | mandatory | Utilization of the selected port calculated as a percentage of the total bandwidth available for the bus. |
| 1.3.6.1.4.1.232.101.2.2.8.1.1.9 | Columncpqn52nnBusMonRisingThreshold | read-write | mandatory | DURABLE: If this threshold is exceeded, then the action listed in ThresholdAction will take place. The value is a % utilzation. |
| 1.3.6.1.4.1.232.101.2.2.8.1.1.10 | Columncpqn52nnBusMonFallingThreshold | read-write | mandatory | DURABLE: If this threshold is exceeded, then the action listed in ThresholdAction will take place. The value is a % utilzation. |
| 1.3.6.1.4.1.232.101.2.2.8.1.1.11 | Columncpqn52nnBusMonAction | read-write | mandatory | DURABLE: If this threshold is exceeded, then the action listed in ThresholdAction will take place. The value is an absolute number in bytes/sec. |
| 1.3.6.1.4.1.232.101.2.2.8.1.1.12 | Columncpqn52nnBusMonTrapEnable | read-write | mandatory | DURABLE: Enable Trap Generation if threshold is exceeded. |
| 1.3.6.1.4.1.232.101.2.2.9 | Nodecpqb52nnPortRxMemCongestionTrap | The SNMP trap that is generated when an alarm entry crosses its rising or falling threshold and generates an event that is configured for sending SNMP traps. |