CTRON-NAT-MIB
60 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.1 | NodectNat | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.1.1 | NodectNatConfigGroup | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.1.1.1 | ScalarctNatPublicIfIndex | read-write | mandatory | This is the value of the MIB II ifindex which identifies the router port connected to the public network. |
| 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.1.1.2 | ScalarctNatPublicIP | read-only | mandatory | This is the IP address of the interface which is selected by ctNatPublicIfIndex. |
| 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.1.1.3 | ScalarctNatPublicMask | read-only | mandatory | This is the subnet mask of the interface which is selected by ctNatPublicIfIndex. |
| 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.1.1.4 | ScalarctNatMaxConn | read-write | mandatory | This is the value of the maximum number of simultaneous connections allowed, using the Network Address Translator application. The default value is 200. Accept… |
| 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.1.1.5 | ScalarctNatTcpTimeout | read-write | mandatory | This is the value in seconds after which an idle TCP connection will be deleted. The default value is 300. Acceptable values are from 60 to 3600. |
| 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.1.1.6 | ScalarctNatUdpTimeout | read-write | mandatory | This is the value in seconds after which an idle UDP connection will be deleted. The default value is 120. Acceptable values are from 60 to 3600. |
| 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.1.1.7 | ScalarctNatPktsL2I | read-only | mandatory | This is the number of packets which have been forwarded from the private network to the public network since the last reset. |
| 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.1.1.8 | ScalarctNatPktsI2L | read-only | mandatory | This is the number of packets which have been forwarded from the public network to the private network since the last reset. |
| 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.1.1.9 | ScalarctNatBytesL2I | read-only | mandatory | This is the number of bytes which have been forwarded from the private network to the public network since the last reset. |
| 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.1.1.10 | ScalarctNatBytesI2L | read-only | mandatory | This is the number of bytes which have been forwarded from the public network to the private network since the last reset. |
| 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.1.1.11 | ScalarctNatTcpConn | read-only | mandatory | This is the number of active TCP connections using the Network Address Translator application. |
| 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.1.1.12 | ScalarctNatUdpConn | read-only | mandatory | This is the number of active UDP connections using the Network Address Translator application. |
| 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.1.1.13 | ScalarctNatIcmpConn | read-only | mandatory | This is the number of active ICMP connections using the Network Address Translator application. |
| 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.1.1.14 | ScalarctNatRetries | read-only | mandatory | This is the number of detected TCP retries in both directions since the last reset. |
| 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.1.1.15 | ScalarctNatBadSums | read-only | mandatory | This is the number of detected checksum errors in both directions since the last reset. |
| 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.1.1.16 | ScalarctNatTotalPkts | read-only | mandatory | This is the total number of packets by the application since the last reset. |
| 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.1.1.17 | ScalarctNatBadPkts | read-only | mandatory | This is the total number of packets detected with an invalid format since the last reset. |
| 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.1.1.18 | ScalarctNatResPkts | read-only | mandatory | This is the total number of packets detected with a reserved address since the last reset. |
| 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.1.1.19 | ScalarctNatTotTcpConn | read-only | mandatory | This is the number of TCP connections made using the Network Address Translator application since the last reset. |
| 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.1.1.20 | ScalarctNatTotUdpConn | read-only | mandatory | This is the number of UDP connections made using the Network Address Translator application since the last reset. |
| 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.1.1.21 | ScalarctNatTotIcmpConn | read-only | mandatory | This is the number of ICMP connections made using the Network Address Translator application since the last reset. |
| 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.1.1.22 | TablectNatConfigTable | not-accessible | mandatory | Information describing the configuration parameters for each instance of NAT. |
| 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.1.1.22.1 | RowctNatConfigEntry | not-accessible | mandatory | A description of a single server entry. |
| 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.1.1.22.1.1 | ColumnctNatConfigId | read-only | mandatory | A unique value identifying an element in a sequence of groups which belong to the NAT configuration table. |
| 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.1.1.22.1.2 | ColumnctNatAdminStatus | read-write | mandatory | Used to enable and disable the Network Address Translator method for this instance. This object must be set to enabled for the translation to occur on ctNatLoc… |
| 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.1.1.22.1.3 | ColumnctNatOperStatus | read-only | mandatory | Indicates the current operating status of the Network Address Translator feature. |
| 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.1.1.22.1.4 | ColumnctNatLocalIfIndex | read-write | mandatory | This is the value of the MIB II ifindex which identifies the router port connected to the private network. |
| 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.1.1.22.1.5 | ColumnctNatLocalIP | read-only | mandatory | This is the IP address of the interface which serves as the gateway for the private network. With ctNatLocalMask, it serves to define the subnet of the hosts o… |
| 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.1.1.22.1.6 | ColumnctNatLocalMask | read-only | mandatory | This is the subnet mask of the interface which serves as the gateway for the private network. With ctNatLocalIP, it serves to define the subnet of the hosts on… |
| 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.1.2 | NodectNatServerGroup | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.1.2.1 | ScalarctNatTotServerEntries | read-only | mandatory | This is the total number of server assignments. |
| 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.1.2.2 | TablectNatServerListTable | not-accessible | mandatory | Information describing the configured parameters which designate a local device as a server. |
| 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.1.2.2.1 | RowctNatServerListEntry | not-accessible | mandatory | A description of a single server entry. |
| 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.1.2.2.1.1 | ColumnctNatServerId | read-only | mandatory | A unique value identifying an element in a sequence of groups which belong to the NAT Server List. This value ranges from 1 to 16. |
| 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.1.2.2.1.2 | ColumnctNatProxyServer | read-write | mandatory | A description of a proxy server assignment. The format is private IP address of the server, followed by the public port number, followed by the private port nu… |
| 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.1.3 | NodectNatConnStatsGroup | |||
| 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.1.3.1 | ScalarctNatTotActiveConn | read-only | mandatory | This is the total number of active connections. |
| 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.1.3.2 | TablectNatConnStatsTable | not-accessible | mandatory | Information describing the configured parameters which designate a local device as a server. |
| 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.1.3.2.1 | RowctNatConnStatsEntry | not-accessible | mandatory | A description of a single server entry. |
| 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.1.3.2.1.1 | ColumnctNatConnStatsID | read-only | mandatory | A unique value identifying an element in a sequence of active connections which belong to the NAT Connection Statistics Group. |
| 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.1.3.2.1.2 | ColumnctNatConnStatsForeignIP | read-only | mandatory | This is the IP address of the foreign host during this active connection. |
| 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.1.3.2.1.3 | ColumnctNatConnStatsLocalIP | read-only | mandatory | This is the IP address of the local host during this active connection. |
| 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.1.3.2.1.4 | ColumnctNatConnStatsPublicPort | read-only | mandatory | This is the port number addressed by an external device. It is also substituted for the local port by NAT on outbound packets. |
| 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.1.3.2.1.5 | ColumnctNatConnStatsLocalPort | read-only | mandatory | This is the local host's port for TCP or UDP for this active connection. |
| 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.1.3.2.1.6 | ColumnctNatConnStatsForeignPort | read-only | mandatory | This is the source port number used by the foreign host for this active connection. |
| 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.1.3.2.1.7 | ColumnctNatConnStatsOutgoingPkts | read-only | mandatory | This is the number of packets that have been sent from the local net to the public net by this active connection. |
| 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.1.3.2.1.8 | ColumnctNatConnStatsOutgoingBytes | read-only | mandatory | This is the number of bytes that have been sent from the local net to the public net by this active connection. |
| 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.1.3.2.1.9 | ColumnctNatConnStatsIncomingPkts | read-only | mandatory | This is the number of packets that have been sent from the public net to the local net by this active connection. |
| 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.1.3.2.1.10 | ColumnctNatConnStatsIncomingBytes | read-only | mandatory | This is the number of bytes that have been sent from the public net to the local net by this active connection. |
| 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.1.3.2.1.11 | ColumnctNatConnStatsTimeSinceUse | read-only | mandatory | This is the time in seconds since the last packet was sent or received on this active connection. |
| 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.1.3.2.1.12 | ColumnctNatConnStatsProtocol | read-only | mandatory | This is the type of IP protocol used by this active connection. Options are 1 = ICMP, 6 = TCP and 17 = UDP. |
| 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.1.3.2.1.13 | ColumnctNatConnStatsTCPSeq | read-only | mandatory | This is the last TCP sequence number of local host sent on this active connection. |
| 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.1.3.2.1.14 | ColumnctNatConnStatsTCPAck | read-only | mandatory | This is the last TCP acknowledgement number of local host sent on this active connection. |
| 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.1.3.2.1.15 | ColumnctNatConnStatsTCPState | read-only | mandatory | This is the TCP connection state value on this active connection. |
| 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.1.3.2.1.16 | ColumnctNatConnStatsLocalRetrys | read-only | mandatory | This is the number of TCP retries by the local host on this active connection. |
| 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.1.3.2.1.17 | ColumnctNatConnStatsForeignRetrys | read-only | mandatory | This is the number of TCP retries by the foreign host on this active connection. |
| 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.1.3.2.1.18 | ColumnctNatConnStatsLocalChecksum | read-only | mandatory | This is the number of times checksum failed in a packet from the local host on this active connection. |
| 1.3.6.1.4.1.52.4.2.2.2.3.1.2.12.1.3.2.1.19 | ColumnctNatConnStatsForeignChecksum | read-only | mandatory | This is the number of times checksum failed in a packet from the foreign host on this active connection. |