DASAN-BRIDGE-MIB
59 objects
The MIB module to describe bridge of DASAN product.
Imported Objects
| DASAN-SMI | dasanEvents dasanMgmt dasanModules |
| DASAN-SWITCH-MIB | dasanSwitchMIBObjects dsSwitchModules |
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 Gauge32 Integer32 mib-2 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | AutonomousType DisplayString PhysAddress RowStatus TestAndIncr TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6296.9.1.1.2.22 | IdentitydsBridge | The MIB module to describe bridge of DASAN product. | ||
| 1.3.6.1.4.1.6296.9.1.1.2.22.1 | NodedsVlanBase | |||
| 1.3.6.1.4.1.6296.9.1.1.2.22.1.1 | ScalardsVlanVersionNumber | read-only | current | The version number of IEEE 802.1Q that this device supports. |
| 1.3.6.1.4.1.6296.9.1.1.2.22.1.2 | ScalardsVlanMaxVlanId | read-only | current | The maximum IEEE 802.1Q VLAN ID that this device supports. |
| 1.3.6.1.4.1.6296.9.1.1.2.22.1.3 | ScalardsVlanMaxSupportedVlans | read-only | current | The maximum number of VLANs that this device supports. |
| 1.3.6.1.4.1.6296.9.1.1.2.22.1.4 | ScalardsVlanNumVlans | read-only | current | The current number of VLANs that are configured in this device. |
| 1.3.6.1.4.1.6296.9.1.1.2.22.1.5 | ScalardsVlanGvrpStatus | read-write | current | The administrative status requested by management for GVRP. The value enabled(1) indicates that GVRP should be enabled on this device, on all ports for which i… |
| 1.3.6.1.4.1.6296.9.1.1.2.22.2 | TabledsVlanCurrentTable | not-accessible | current | A table containing current configuration information for each VLAN currently configured into the device by (local or network) management, or dynamically create… |
| 1.3.6.1.4.1.6296.9.1.1.2.22.2.1 | RowdsVlanCurrentEntry | not-accessible | current | Information for a VLAN configured into the device by (local or network) management, or dynamically created as a result of GVRP requests received. |
| 1.3.6.1.4.1.6296.9.1.1.2.22.2.1.1 | ColumndsVlanIndex | read-only | current | The VLAN-ID or other identifier refering to this VLAN. |
| 1.3.6.1.4.1.6296.9.1.1.2.22.2.1.2 | ColumndsVlanName | read-only | current | The VLAN-NAME to this VLAN. |
| 1.3.6.1.4.1.6296.9.1.1.2.22.2.1.3 | ColumndsVlanFdbId | read-only | current | The Filtering Database used by this VLAN. This value is allocated automatically by the device whenever the VLAN is created: either dynamically by GVRP, or by m… |
| 1.3.6.1.4.1.6296.9.1.1.2.22.2.1.4 | ColumndsVlanCurrentEgressPorts | read-only | current | The set of ports which are transmitting traffic for this VLAN as either tagged or untagged frames. |
| 1.3.6.1.4.1.6296.9.1.1.2.22.2.1.5 | ColumndsVlanCurrentUntaggedPorts | read-only | current | The set of ports which are transmitting traffic for this VLAN as untagged frames. |
| 1.3.6.1.4.1.6296.9.1.1.2.22.2.1.6 | ColumndsVlanStatus | read-only | current | This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so differ from the foll… |
| 1.3.6.1.4.1.6296.9.1.1.2.22.2.1.7 | ColumndsVlanCreationTime | read-only | current | The value of sysUpTime when this VLAN was created. |
| 1.3.6.1.4.1.6296.9.1.1.2.22.2.1.8 | ColumndsVlanCurrentPhysicalPorts | read-only | current | The set of ports which are physical. |
| 1.3.6.1.4.1.6296.9.1.1.2.22.3 | NodedsTp | |||
| 1.3.6.1.4.1.6296.9.1.1.2.22.3.1 | TabledsTpFdbTable | not-accessible | current | A table that contains information about unicast entries for which the device has forwarding and/or filtering information. This information is used by the trans… |
| 1.3.6.1.4.1.6296.9.1.1.2.22.3.1.1 | RowdsTpFdbEntry | not-accessible | current | Information about a specific unicast MAC address for which the device has some forwarding and/or filtering information. |
| 1.3.6.1.4.1.6296.9.1.1.2.22.3.1.1.1 | ColumndsTpFdbFid | read-only | current | The identity of this Filtering Database. |
| 1.3.6.1.4.1.6296.9.1.1.2.22.3.1.1.2 | ColumndsTpFdbVlanName | read-only | current | The name of VLAN related to this Filtering Database. |
| 1.3.6.1.4.1.6296.9.1.1.2.22.3.1.1.3 | ColumndsTpFdbAddress | read-only | current | A unicast MAC address for which the bridge has forwarding and/or filtering information. |
| 1.3.6.1.4.1.6296.9.1.1.2.22.3.1.1.4 | ColumndsTpFdbPort | read-only | current | Either the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance of dsTpFdbAddres… |
| 1.3.6.1.4.1.6296.9.1.1.2.22.3.1.1.5 | ColumndsTpFdbStatus | read-only | current | The status of this entry. The meanings of the values are: other(1) - none of the following. invalid(2) - this entry is no longer valid (e.g., it was learned bu… |
| 1.3.6.1.4.1.6296.9.1.1.2.22.4 | NodedsStpBase | |||
| 1.3.6.1.4.1.6296.9.1.1.2.22.5 | TabledsStpTable | not-accessible | current | The table of STP supported this device. |
| 1.3.6.1.4.1.6296.9.1.1.2.22.5.1 | RowdsStpEntry | not-accessible | current | The table of STP supported this device. |
| 1.3.6.1.4.1.6296.9.1.1.2.22.5.1.1 | ColumndsStpIndex | read-only | current | . |
| 1.3.6.1.4.1.6296.9.1.1.2.22.5.1.2 | ColumndsStpVid | read-only | current | . |
| 1.3.6.1.4.1.6296.9.1.1.2.22.5.1.3 | ColumndsStpProtocolSpecification | read-only | current | An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 100 Spanning Tree protocol. IEEE … |
| 1.3.6.1.4.1.6296.9.1.1.2.22.5.1.4 | ColumndsStpPriority | read-write | current | The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of the Bridge ID ar… |
| 1.3.6.1.4.1.6296.9.1.1.2.22.5.1.5 | ColumndsStpTimeSinceTopologyChange | read-only | current | The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity. |
| 1.3.6.1.4.1.6296.9.1.1.2.22.5.1.6 | ColumndsStpTopChanges | read-only | current | The total number of topology changes detected by this bridge since the management entity was last reset or initialized. |
| 1.3.6.1.4.1.6296.9.1.1.2.22.5.1.7 | ColumndsStpDesignatedRoot | read-only | current | The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Ide… |
| 1.3.6.1.4.1.6296.9.1.1.2.22.5.1.8 | ColumndsStpRootCost | read-only | current | The cost of the path to the root as seen from this bridge. |
| 1.3.6.1.4.1.6296.9.1.1.2.22.5.1.9 | ColumndsStpRootPort | read-only | current | The port number of the port which offers the lowest cost path from this bridge to the root bridge. |
| 1.3.6.1.4.1.6296.9.1.1.2.22.5.1.10 | ColumndsStpMaxAge | read-only | current | The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is … |
| 1.3.6.1.4.1.6296.9.1.1.2.22.5.1.11 | ColumndsStpHelloTime | read-only | current | The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become … |
| 1.3.6.1.4.1.6296.9.1.1.2.22.5.1.12 | ColumndsStpHoldTime | read-only | current | This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredth… |
| 1.3.6.1.4.1.6296.9.1.1.2.22.5.1.13 | ColumndsStpForwardDelay | read-only | current | This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The… |
| 1.3.6.1.4.1.6296.9.1.1.2.22.5.1.14 | ColumndsStpBridgeMaxAge | read-write | current | The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related … |
| 1.3.6.1.4.1.6296.9.1.1.2.22.5.1.15 | ColumndsStpBridgeHelloTime | read-write | current | The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D- 1990 to be 1 second.… |
| 1.3.6.1.4.1.6296.9.1.1.2.22.5.1.16 | ColumndsStpBridgeForwardDelay | read-write | current | The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is re… |
| 1.3.6.1.4.1.6296.9.1.1.2.22.6 | TabledsStpPortTable | not-accessible | current | The port table of STP supported this device. |
| 1.3.6.1.4.1.6296.9.1.1.2.22.6.1 | RowdsStpPortEntry | not-accessible | current | The port table of STP supported this device. |
| 1.3.6.1.4.1.6296.9.1.1.2.22.6.1.1 | ColumndsStpPort | read-only | current | The port number of the port for which this entry contains Spanning Tree Protocol management information. |
| 1.3.6.1.4.1.6296.9.1.1.2.22.6.1.2 | ColumndsStpPortPriority | read-write | current | The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID. The other octet of the Port ID is … |
| 1.3.6.1.4.1.6296.9.1.1.2.22.6.1.3 | ColumndsStpPortState | read-only | current | The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the … |
| 1.3.6.1.4.1.6296.9.1.1.2.22.6.1.4 | ColumndsStpPortEnable | read-write | current | The enabled/disabled status of the port. |
| 1.3.6.1.4.1.6296.9.1.1.2.22.6.1.5 | ColumndsStpPortPathCost | read-write | current | The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value o… |
| 1.3.6.1.4.1.6296.9.1.1.2.22.6.1.6 | ColumndsStpPortDesignatedRoot | read-only | current | The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the po… |
| 1.3.6.1.4.1.6296.9.1.1.2.22.6.1.7 | ColumndsStpPortDesignatedCost | read-only | current | The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs. |
| 1.3.6.1.4.1.6296.9.1.1.2.22.6.1.8 | ColumndsStpPortDesignatedBridge | read-only | current | The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment. |
| 1.3.6.1.4.1.6296.9.1.1.2.22.6.1.9 | ColumndsStpPortDesignatedPort | read-only | current | The Port Identifier of the port on the Designated Bridge for this port's segment. |
| 1.3.6.1.4.1.6296.9.1.1.2.22.6.1.10 | ColumndsStpPortForwardTransitions | read-only | current | The number of times this port has transitioned from the Learning state to the Forwarding state. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| PortList | OCTET STRING | current | Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents… |
| VlanId | INTEGER (1..4094) | current | A 12-bit VLAN ID used in the VLAN Tag header. |
| VlanIndex | Unsigned32 | current | A value used to index per-VLAN tables: values of 0 and 4095 are not permitted; if the value is between 1 and 4094 inclusive, it represents an IEEE 802.1Q VLAN-ID with global scope within a given bridged domain (see Vlan… |