DES6500-SWL3MGMT-MIB
158 objects
The Structure of Layer 3 Network Management Information for the proprietary enterprise.
Imported Objects
| IF-MIB | InterfaceIndex |
| OSPF-MIB | AreaID DesignatedRouterPriority HelloRange Metric PositiveInteger RouterID Status TOSType UpToMaxAge |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString PhysAddress RowStatus TruthValue |
| SW6500PRIMGMT-MIB | des6500 |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.11.78.1.3 | IdentityswL3MgmtMIB | The Structure of Layer 3 Network Management Information for the proprietary enterprise. | ||
| 1.3.6.1.4.1.171.11.78.1.3.1 | NodeswL3DevMgmt | |||
| 1.3.6.1.4.1.171.11.78.1.3.1.1 | NodeswL3DevCtrl | |||
| 1.3.6.1.4.1.171.11.78.1.3.1.1.1 | ScalarswL3DevCtrlRIPState | read-write | current | This object indicates Routing Information Protocol (RIP) version 2 function is enabled or disabled. |
| 1.3.6.1.4.1.171.11.78.1.3.1.1.2 | ScalarswL3DevCtrlOSPFState | read-write | current | This object indicates OSPF protocol is enabled or disabled. |
| 1.3.6.1.4.1.171.11.78.1.3.1.1.3 | ScalarswL3DevCtrlDVMRPState | read-write | current | This object indicates DVMRP protocol is enabled or disabled. |
| 1.3.6.1.4.1.171.11.78.1.3.1.1.5 | ScalarswL3DevCtrlVrrpState | read-write | current | This object indicates VRRP protocol is enabled or disabled. |
| 1.3.6.1.4.1.171.11.78.1.3.1.1.6 | ScalarswL3DevCtrlVrrpPingState | read-write | current | This object indicates VRRP protocol Ping is enabled or disabled. |
| 1.3.6.1.4.1.171.11.78.1.3.1.1.7 | ScalarswL3DevCtrlDHCPAutoConfigState | read-write | current | This object indicates auto config is enabled or disabled. |
| 1.3.6.1.4.1.171.11.78.1.3.1.1.8 | ScalarswL3DevCtrlPIMGlobalState | read-write | current | This object indicates PIM protocol is enabled or disabled. |
| 1.3.6.1.4.1.171.11.78.1.3.2 | NodeswL3IpMgmt | |||
| 1.3.6.1.4.1.171.11.78.1.3.2.1 | NodeswL3IpCtrlMgmt | |||
| 1.3.6.1.4.1.171.11.78.1.3.2.1.1 | TableswL3IpCtrlTable | not-accessible | current | This table contain IP interface information. |
| 1.3.6.1.4.1.171.11.78.1.3.2.1.1.1 | RowswL3IpCtrlEntry | not-accessible | current | A list of information about a specific IP interface. |
| 1.3.6.1.4.1.171.11.78.1.3.2.1.1.1.1 | ColumnswL3IpCtrlIpAddr | not-accessible | current | The IP address of the interface. This object only can take the value of the unicast IP address. |
| 1.3.6.1.4.1.171.11.78.1.3.2.1.1.1.2 | ColumnswL3IpCtrlIfIndex | read-only | current | This object uniquely identifies the IP interface number in the swL3IpCtrlTable. |
| 1.3.6.1.4.1.171.11.78.1.3.2.1.1.1.3 | ColumnswL3IpCtrlInterfaceName | read-create | current | This object indicates the name of the IP interface. |
| 1.3.6.1.4.1.171.11.78.1.3.2.1.1.1.4 | ColumnswL3IpCtrlIpSubnetMask | read-create | current | The IP net mask for this interface. |
| 1.3.6.1.4.1.171.11.78.1.3.2.1.1.1.5 | ColumnswL3IpCtrlVlanName | read-create | current | This object indicates the IP control entry's VLAN name. The VLAN name in each entry must be unique in the IP Control Table. |
| 1.3.6.1.4.1.171.11.78.1.3.2.1.1.1.6 | ColumnswL3IpCtrlMode | read-create | current | This object indicates the IP operation mode. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each… |
| 1.3.6.1.4.1.171.11.78.1.3.2.1.1.1.7 | ColumnswL3IpCtrlSecondary | read-create | current | When this is true(1) the IP address is the secondary IP. When false(2), the IP address is the primary IP. |
| 1.3.6.1.4.1.171.11.78.1.3.2.1.1.1.8 | ColumnswL3IpCtrlState | read-create | current | This variable displays the status of the entry. The status used for creating, modifying, and deleting instances of the objects in this table. |
| 1.3.6.1.4.1.171.11.78.1.3.2.1.1.1.9 | ColumnswL3IpCtrlOperState | read-only | current | The current operational state of the IP interface.PS: Link state |
| 1.3.6.1.4.1.171.11.78.1.3.2.1.1.1.10 | ColumnswL3IpCtrlAdminState | read-create | current | The state of a specific IP interface. |
| 1.3.6.1.4.1.171.11.78.1.3.2.2 | NodeswL3IpFdbMgmt | |||
| 1.3.6.1.4.1.171.11.78.1.3.2.2.1 | TableswL3IpFdbInfoTable | not-accessible | current | A table that contains forwarding and/or filtering information. This information is used by the switch in determining how to propagate the received IP packets. |
| 1.3.6.1.4.1.171.11.78.1.3.2.2.1.1 | RowswL3IpFdbInfoEntry | not-accessible | current | Information about a specific IP address for which the bridge has some forwarding and/or filtering information. |
| 1.3.6.1.4.1.171.11.78.1.3.2.2.1.1.1 | ColumnswL3IpFdbInfoIpAddr | read-only | current | A IP address for which switch has forwarding and/or filtering information. |
| 1.3.6.1.4.1.171.11.78.1.3.2.2.1.1.2 | ColumnswL3IpFdbInfoIpSubnetMask | read-only | current | A IP net mask for this interface.for which switch has forwarding and/or filtering information. |
| 1.3.6.1.4.1.171.11.78.1.3.2.2.1.1.3 | ColumnswL3IpFdbInfoPort | read-only | current | Either the value '0', or the port number of the port on which packet having a IP address equal to the value of the corresponding instance of swL3IpFdbInfoIpAdd… |
| 1.3.6.1.4.1.171.11.78.1.3.2.2.1.1.4 | ColumnswL3IpFdbInfoType | read-only | current | The status of this entry. |
| 1.3.6.1.4.1.171.11.78.1.3.2.4 | ScalarswL3IpArpAgingTime | read-write | current | The timeout period in minutes for aging out dynamically learned arp information. |
| 1.3.6.1.4.1.171.11.78.1.3.2.5 | TableswL3IpStaticRouteTable | not-accessible | current | This entity's IP static Routing table. |
| 1.3.6.1.4.1.171.11.78.1.3.2.5.1 | RowswL3IpStaticRouteEntry | not-accessible | current | A particular route to a particular destination, under a particular policy. Once an entry be built,it shouldn't be modified.That is,it just support create and d… |
| 1.3.6.1.4.1.171.11.78.1.3.2.5.1.1 | ColumnswL3IpStaticRouteDest | read-only | current | The destination IP address of this route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance o… |
| 1.3.6.1.4.1.171.11.78.1.3.2.5.1.2 | ColumnswL3IpStaticRouteMask | read-only | current | Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the swL3IpStaticRouteDest field. For those systems tha… |
| 1.3.6.1.4.1.171.11.78.1.3.2.5.1.3 | ColumnswL3IpStaticRouteNextHop | read-only | current | On remote routes, the address of the next sys- tem en route; Otherwise, 0.0.0.0. |
| 1.3.6.1.4.1.171.11.78.1.3.2.5.1.4 | ColumnswL3IpStaticRouteBkupState | read-only | current | The routing state for this route.The value SHOULD be primary(1) or backup(2). |
| 1.3.6.1.4.1.171.11.78.1.3.2.5.1.5 | ColumnswL3IpStaticRouteMetric | read-create | current | The routing metric for this route. |
| 1.3.6.1.4.1.171.11.78.1.3.2.5.1.6 | ColumnswL3IpStaticRouteStatus | read-create | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.171.11.78.1.3.3 | NodeswL3RelayMgmt | |||
| 1.3.6.1.4.1.171.11.78.1.3.3.1 | NodeswL3RelayDhcpMgmt | |||
| 1.3.6.1.4.1.171.11.78.1.3.3.1.1 | ScalarswL3RelayBootpState | read-write | current | This object indicates DHCP Relay function is enabled or disabled. |
| 1.3.6.1.4.1.171.11.78.1.3.3.1.2 | ScalarswL3RelayBootpHopCount | read-write | current | This object indicates the maximum number of router hops that the DHCP packets can cross. |
| 1.3.6.1.4.1.171.11.78.1.3.3.1.3 | ScalarswL3RelayBootpTimeThreshold | read-write | current | This object indicates the minimum time in seconds within which the switch must relay the DHCP request. If this time is exceeded, the switch will drop the BOOTP… |
| 1.3.6.1.4.1.171.11.78.1.3.3.1.4 | TableswL3RelayDhcpCtrlTable | not-accessible | current | This table specifys the IP address as a destination to forward (relay) DHCP packets to. |
| 1.3.6.1.4.1.171.11.78.1.3.3.1.4.1 | RowswL3RelayDhcpCtrlEntry | not-accessible | current | A list of information specifies the IP address as a destination to forward (relay) DHCP packets to. |
| 1.3.6.1.4.1.171.11.78.1.3.3.1.4.1.1 | ColumnswL3RelayDhcpCtrlInterfaceName | read-only | current | The name of the IP interface. |
| 1.3.6.1.4.1.171.11.78.1.3.3.1.4.1.2 | ColumnswL3RelayDhcpCtrlServer | read-only | current | The DHCP server IP address. |
| 1.3.6.1.4.1.171.11.78.1.3.3.1.4.1.3 | ColumnswL3RelayDhcpCtrlState | read-write | current | This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from e… |
| 1.3.6.1.4.1.171.11.78.1.3.3.1.5 | ScalarswL3RelayDhcpOption82State | read-write | current | This object indicates DHCP Relay Option 82 function is enabled or disabled. |
| 1.3.6.1.4.1.171.11.78.1.3.3.1.6 | ScalarswL3RelayDhcpOption82ChceckState | read-write | current | This object indicates DHCP Relay Option 82 Chceck function is enabled or disabled. |
| 1.3.6.1.4.1.171.11.78.1.3.3.1.7 | ScalarswL3RelayDhcpOption82Policy | read-write | current | This object indicates DHCP Relay Option 82 Policy. |
| 1.3.6.1.4.1.171.11.78.1.3.3.2 | NodeswL3RelayDnsMgmt | |||
| 1.3.6.1.4.1.171.11.78.1.3.3.2.1 | ScalarswL3RelayDnsState | read-write | current | This object indicates DNS Relay function is enabled or disabled. |
| 1.3.6.1.4.1.171.11.78.1.3.3.2.2 | ScalarswL3RelayDnsPrimaryServer | read-write | current | This object indicates the address of the primary DNS server. |
| 1.3.6.1.4.1.171.11.78.1.3.3.2.3 | ScalarswL3RelayDnsSecondaryServer | read-write | current | This object indicates the address of the secondary DNS server. |
| 1.3.6.1.4.1.171.11.78.1.3.3.2.4 | ScalarswL3RelayDnsCacheState | read-write | current | This object indicates DNS Relay cache is enabled or disabled. |
| 1.3.6.1.4.1.171.11.78.1.3.3.2.5 | ScalarswL3RelayDnsStaticTableState | read-write | current | This object indicates DNS Relay static table is enabled or disabled. |
| 1.3.6.1.4.1.171.11.78.1.3.3.2.6 | TableswL3RelayDnsCtrlTable | not-accessible | current | This table display the current DNS relay static table. |
| 1.3.6.1.4.1.171.11.78.1.3.3.2.6.1 | RowswL3RelayDnsCtrlEntry | not-accessible | current | A list of information display the current DNS relay static table. |
| 1.3.6.1.4.1.171.11.78.1.3.3.2.6.1.1 | ColumnswL3RelayDnsCtrlDomainName | read-only | current | The domain name of the entry. |
| 1.3.6.1.4.1.171.11.78.1.3.3.2.6.1.2 | ColumnswL3RelayDnsCtrlIpAddr | read-only | current | The IP address of the entry. |
| 1.3.6.1.4.1.171.11.78.1.3.3.2.6.1.3 | ColumnswL3RelayDnsCtrlState | read-write | current | This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from e… |
| 1.3.6.1.4.1.171.11.78.1.3.4 | TableswL3Md5Table | not-accessible | current | This table display the current MD5 key table. |
| 1.3.6.1.4.1.171.11.78.1.3.4.1 | RowswL3Md5Entry | not-accessible | current | A list of information display the current MD5 key table. |
| 1.3.6.1.4.1.171.11.78.1.3.4.1.1 | ColumnswL3Md5KeyId | read-only | current | The MD5 key ID. |
| 1.3.6.1.4.1.171.11.78.1.3.4.1.2 | ColumnswL3Md5Key | read-create | current | An MD5 password of up to 16 bytes. |
| 1.3.6.1.4.1.171.11.78.1.3.4.1.3 | ColumnswL3Md5RowStatus | read-create | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.171.11.78.1.3.5 | TableswL3RouteRedistriTable | not-accessible | current | Route redistribution allows routers on the network. That are running different routing protocols to exchange routing information. This is accomplished by compa… |
| 1.3.6.1.4.1.171.11.78.1.3.5.1 | RowswL3RouteRedistriEntry | not-accessible | current | A list of information display the route redistribution table. |
| 1.3.6.1.4.1.171.11.78.1.3.5.1.1 | ColumnswL3RouteRedistriSrcProtocol | read-only | current | Allows the selection of the protocol of the source device. |
| 1.3.6.1.4.1.171.11.78.1.3.5.1.2 | ColumnswL3RouteRedistriDstProtocol | read-only | current | Allows the selection of the protocol of the destination device. |
| 1.3.6.1.4.1.171.11.78.1.3.5.1.3 | ColumnswL3RouteRedistriType | read-create | current | Allows the selection of one of the methods for calcalculating the metric value. |
| 1.3.6.1.4.1.171.11.78.1.3.5.1.4 | ColumnswL3RouteRedistriMetric | read-create | current | Allows the entry of an OSPF interface cost. This is analogous to a Hop Count in the RIP routing protocol. The value '0' indicates default value. |
| 1.3.6.1.4.1.171.11.78.1.3.5.1.5 | ColumnswL3RouteRedistriRowStatus | read-create | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.171.11.78.1.3.6 | TableswL3OspfHostTable | not-accessible | current | The list of Hosts, and their metrics, that the router will advertise as host routes. |
| 1.3.6.1.4.1.171.11.78.1.3.6.1 | RowswL3OspfHostEntry | not-accessible | current | A metric to be advertised, for a given type of service, when a given host is reachable. |
| 1.3.6.1.4.1.171.11.78.1.3.6.1.1 | ColumnswL3OspfHostIpAddress | read-only | current | The IP Address of the Host. |
| 1.3.6.1.4.1.171.11.78.1.3.6.1.2 | ColumnswL3OspfHostTOS | read-only | current | The Type of Service of the route being configured. |
| 1.3.6.1.4.1.171.11.78.1.3.6.1.3 | ColumnswL3OspfHostMetric | read-create | current | The Metric to be advertised. |
| 1.3.6.1.4.1.171.11.78.1.3.6.1.4 | ColumnswL3OspfHostAreaID | read-create | current | The Area the Host Entry is to be found within. By default, the area that a subsuming OSPF interface is in, or 0.0.0.0 |
| 1.3.6.1.4.1.171.11.78.1.3.6.1.5 | ColumnswL3OspfHostStatus | read-create | current | This variable displays the status of the entry. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implem… |
| 1.3.6.1.4.1.171.11.78.1.3.7 | TableswL3ospfVirtIfTable | not-accessible | current | Information about this router's virtual inter- faces. |
| 1.3.6.1.4.1.171.11.78.1.3.7.1 | RowswL3ospfVirtIfEntry | not-accessible | current | Information about a single Virtual Interface. |
| 1.3.6.1.4.1.171.11.78.1.3.7.1.1 | ColumnswL3ospfVirtIfAreaId | read-only | current | The Transit Area that the Virtual Link traverses. By definition, this is not 0.0.0.0 |
| 1.3.6.1.4.1.171.11.78.1.3.7.1.2 | ColumnswL3ospfVirtIfNeighbor | read-only | current | The Router ID of the Virtual Neighbor. |
| 1.3.6.1.4.1.171.11.78.1.3.7.1.3 | ColumnswL3ospfVirtIfTransitDelay | read-create | current | The estimated number of seconds it takes to transmit a link- state update packet over this interface. |
| 1.3.6.1.4.1.171.11.78.1.3.7.1.4 | ColumnswL3ospfVirtIfRetransInterval | read-create | current | The number of seconds between link-state ad- vertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitt… |
| 1.3.6.1.4.1.171.11.78.1.3.7.1.5 | ColumnswL3ospfVirtIfHelloInterval | read-create | current | The length of time, in seconds, between the Hello packets that the router sends on the in- terface. This value must be the same for the virtual neighbor. |
| 1.3.6.1.4.1.171.11.78.1.3.7.1.6 | ColumnswL3ospfVirtIfRtrDeadInterval | read-create | current | The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hel… |
| 1.3.6.1.4.1.171.11.78.1.3.7.1.7 | ColumnswL3ospfVirtIfState | read-only | current | OSPF virtual interface states. |
| 1.3.6.1.4.1.171.11.78.1.3.7.1.8 | ColumnswL3ospfVirtIfEvents | read-only | current | The number of state changes or error events on this Virtual Link |
| 1.3.6.1.4.1.171.11.78.1.3.7.1.9 | ColumnswL3ospfVirtIfAuthType | read-create | current | The authentication type specified for a virtu- al interface. Additional authentication types may be assigned locally. |
| 1.3.6.1.4.1.171.11.78.1.3.7.1.10 | ColumnswL3ospfVirtIfAuthKey | read-create | current | If Authentication Type is simplePassword, the device will left adjust and zero fill to 8 oc- tets. Note that unauthenticated interfaces need no authentication … |
| 1.3.6.1.4.1.171.11.78.1.3.7.1.11 | ColumnswL3ospfVirtIfAuthKeyID | read-create | current | The MD5 key ID. |
| 1.3.6.1.4.1.171.11.78.1.3.7.1.12 | ColumnswL3ospfVirtIfStatus | read-create | current | This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is impl… |
| 1.3.6.1.4.1.171.11.78.1.3.8 | TableswL3ospfIfTable | not-accessible | current | The OSPF Interface Table describes the inter- faces from the viewpoint of OSPF. |
| 1.3.6.1.4.1.171.11.78.1.3.8.1 | RowswL3ospfIfEntry | not-accessible | current | The OSPF Interface Entry describes one inter- face from the viewpoint of OSPF. |
| 1.3.6.1.4.1.171.11.78.1.3.8.1.1 | ColumnswL3ospfIfIpAddress | read-only | current | The IP address of this OSPF interface. |
| 1.3.6.1.4.1.171.11.78.1.3.8.1.2 | ColumnswL3ospfAddressLessIf | read-only | current | For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the corr… |
| 1.3.6.1.4.1.171.11.78.1.3.8.1.3 | ColumnswL3ospfIfAreaId | read-create | current | A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone. |
| 1.3.6.1.4.1.171.11.78.1.3.8.1.4 | ColumnswL3ospfIfType | read-create | current | The OSPF interface type. By way of a default, this field may be intuited from the corresponding value of ifType. Broad- cast LANs, such as Ethernet and IEEE 80… |
| 1.3.6.1.4.1.171.11.78.1.3.8.1.5 | ColumnswL3ospfIfAdminStat | read-create | current | The OSPF interface's administrative status. The value formed on the interface, and the in- terface will be advertised as an internal route to some area. The va… |
| 1.3.6.1.4.1.171.11.78.1.3.8.1.6 | ColumnswL3ospfIfRtrPriority | read-create | current | The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the r… |
| 1.3.6.1.4.1.171.11.78.1.3.8.1.7 | ColumnswL3ospfIfTransitDelay | read-create | current | The estimated number of seconds it takes to transmit a link state update packet over this interface. |
| 1.3.6.1.4.1.171.11.78.1.3.8.1.8 | ColumnswL3ospfIfRetransInterval | read-create | current | The number of seconds between link-state ad- vertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitt… |
| 1.3.6.1.4.1.171.11.78.1.3.8.1.9 | ColumnswL3ospfIfHelloInterval | read-create | current | The length of time, in seconds, between the Hello packets that the router sends on the in- terface. This value must be the same for all routers attached to a c… |
| 1.3.6.1.4.1.171.11.78.1.3.8.1.10 | ColumnswL3ospfIfRtrDeadInterval | read-create | current | The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hel… |
| 1.3.6.1.4.1.171.11.78.1.3.8.1.11 | ColumnswL3ospfIfPollInterval | read-create | current | The larger time interval, in seconds, between the Hello packets sent to an inactive non- broadcast multi- access neighbor. |
| 1.3.6.1.4.1.171.11.78.1.3.8.1.12 | ColumnswL3ospfIfState | read-only | current | The OSPF Interface State. |
| 1.3.6.1.4.1.171.11.78.1.3.8.1.13 | ColumnswL3ospfIfDesignatedRouter | read-only | current | The IP Address of the Designated Router. |
| 1.3.6.1.4.1.171.11.78.1.3.8.1.14 | ColumnswL3ospfIfBackupDesignatedRouter | read-only | current | The IP Address of the Backup Designated Router. |
| 1.3.6.1.4.1.171.11.78.1.3.8.1.15 | ColumnswL3ospfIfEvents | read-only | current | The number of times this OSPF interface has changed its state, or an error has occurred. |
| 1.3.6.1.4.1.171.11.78.1.3.8.1.16 | ColumnswL3ospfIfMulticastForwarding | read-create | current | The way multicasts should forwarded on this interface; not forwarded, forwarded as data link multicasts, or forwarded as data link uni- casts. Data link multic… |
| 1.3.6.1.4.1.171.11.78.1.3.8.1.17 | ColumnswL3ospfIfDemand | read-create | current | Indicates whether Demand OSPF procedures (hel- lo supression to FULL neighbors and setting the DoNotAge flag on proogated LSAs) should be per- formed on this i… |
| 1.3.6.1.4.1.171.11.78.1.3.8.1.18 | ColumnswL3ospfIfAuthType | read-create | current | The authentication type specified for an in- terface. Additional authentication types may be assigned locally. |
| 1.3.6.1.4.1.171.11.78.1.3.8.1.19 | ColumnswL3ospfIfAuthKey | read-create | current | The Authentication Key. If the Area's Author- ization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero … |
| 1.3.6.1.4.1.171.11.78.1.3.8.1.20 | ColumnswL3ospfIfAuthKeyID | read-create | current | The MD5 key ID. |
| 1.3.6.1.4.1.171.11.78.1.3.8.1.21 | ColumnswL3ospfIfStatus | read-create | current | This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is impl… |
| 1.3.6.1.4.1.171.11.78.1.3.9 | TableswL3dvmrpInterfaceTable | not-accessible | current | The (conceptual) table listing the router's multicast- capable interfaces. |
| 1.3.6.1.4.1.171.11.78.1.3.9.1 | RowswL3dvmrpInterfaceEntry | not-accessible | current | An entry (conceptual row) in the dvmrpInterfaceTable. This row augments ipMRouteInterfaceEntry in the IP Multicast MIB, where the threshold object resides. |
| 1.3.6.1.4.1.171.11.78.1.3.9.1.1 | ColumnswL3dvmrpInterfaceIfIndex | not-accessible | current | The ifIndex value of the interface for which DVMRP is enabled. |
| 1.3.6.1.4.1.171.11.78.1.3.9.1.2 | ColumnswL3dvmrpInterfaceLocalAddress | read-create | current | The IP address this system will use as a source address on this interface. On unnumbered interfaces, it must be the same value as dvmrpInterfaceLocalAddress fo… |
| 1.3.6.1.4.1.171.11.78.1.3.9.1.3 | ColumnswL3dvmrpInterfaceMetric | read-create | current | The distance metric for this interface which is used to calculate distance vectors. |
| 1.3.6.1.4.1.171.11.78.1.3.9.1.4 | ColumnswL3dvmrpInterfaceProbe | read-create | current | the period of sending probe |
| 1.3.6.1.4.1.171.11.78.1.3.9.1.5 | ColumnswL3dvmrpInterfaceNbrTimeout | read-create | current | the timer when neighbor expired. |
| 1.3.6.1.4.1.171.11.78.1.3.9.1.6 | ColumnswL3dvmrpInterfaceStatus | read-create | current | The status of this entry. Creating the entry enables DVMRP on the virtual interface; destroying the entry or setting it to notInService disables DVMRP on the v… |
| 1.3.6.1.4.1.171.11.78.1.3.9.1.7 | ColumnswL3dvmrpInterfaceRcvBadPkts | read-only | current | The number of DVMRP packets received on the interface by the DVMRP process which were subsequently discarded as invalid (e.g. invalid packet format, or a route… |
| 1.3.6.1.4.1.171.11.78.1.3.9.1.8 | ColumnswL3dvmrpInterfaceRcvBadRoutes | read-only | current | The number of routes, in valid DVMRP packets, which were ignored because the entry was invalid. |
| 1.3.6.1.4.1.171.11.78.1.3.10 | NodeswL3PimMgmt | |||
| 1.3.6.1.4.1.171.11.78.1.3.10.1 | NodeswL3PimCbsrInfoMgmt | |||
| 1.3.6.1.4.1.171.11.78.1.3.10.1.1 | ScalarswL3pimCbsrBootStrapPeriod | read-write | current | At the elected BSR, this is the interval between originating Bootstrap messages, and should be equal to 60 seconds. |
| 1.3.6.1.4.1.171.11.78.1.3.10.1.2 | ScalarswL3pimCbsrHashMaskLen | read-write | current | The length (in bits) of the mask to use in the hash function. For IPv4 we recommend a value of 30. For IPv6 we recommand a value of 126. |
| 1.3.6.1.4.1.171.11.78.1.3.10.2 | NodeswL3pimCandidateRPMgmt | |||
| 1.3.6.1.4.1.171.11.78.1.3.10.2.1 | ScalarswL3pimCandidateRPHoldtime | read-write | current | For C-RPs, this is the Holdtime specified in C-RP-Adv message, and is used by the BSR to time out RPs. This should be set to 2.5 * [C-RP-Adv-Period]. Default: … |
| 1.3.6.1.4.1.171.11.78.1.3.10.2.2 | ScalarswL3pimCandidateRPPriority | read-write | current | The 'priority' of the included RP, for the corresponding Encoded-Group Address (if any), highest priority is '0' (i.e. the lower the value of the 'Priority' fi… |
| 1.3.6.1.4.1.171.11.78.1.3.10.2.3 | ScalarswL3pimCandidateRPWildcardPrefixCnt | read-write | current | The number of enocded group addresses included in the message; indicating the group prefixes for which the C-RP is advertising. A Prefix-Cnt of '0' implies a p… |
| 1.3.6.1.4.1.171.11.78.1.3.10.3 | NodeswL3pimSptMgmt | |||
| 1.3.6.1.4.1.171.11.78.1.3.10.3.1 | ScalarswL3pimLastHopSptThreshold | read-write | current | Specifies a last hop router threshold. |
| 1.3.6.1.4.1.171.11.78.1.3.10.3.2 | ScalarswL3pimRPSptThreshold | read-write | current | Specifies an RP threshold. |
| 1.3.6.1.4.1.171.11.78.1.3.10.4 | TableswL3pimRegChksumIncDataTable | not-accessible | current | The PIM Register Checksum Including Data Table contains the PIM register checksum including data information, like RP address and state. |
| 1.3.6.1.4.1.171.11.78.1.3.10.4.1 | RowswL3pimRegChksumIncDataEntry | not-accessible | current | An entry in the PIM Register Checksum Including Data Table. |
| 1.3.6.1.4.1.171.11.78.1.3.10.4.1.1 | ColumnswL3SwL3pimRegChksumIncDataRpAddr | not-accessible | current | Specifies the RP address. |
| 1.3.6.1.4.1.171.11.78.1.3.10.4.1.2 | ColumnswL3SwL3pimRegChksumIncDataState | read-create | current | The state of register checksum including data for RPs. |
| 1.3.6.1.4.1.171.11.78.1.3.10.5 | NodeswL3PimInfoMgmt | |||
| 1.3.6.1.4.1.171.11.78.1.3.10.5.1 | ScalarswL3pimRegisterProbeTime | read-write | current | When null Registers are used, this is the time between sending a null Register and the Register-Suppression-Timer expiring unless it is restarted by receiving … |
| 1.3.6.1.4.1.171.11.78.1.3.10.5.2 | ScalarswL3pimRegisterSuppressionTime | read-write | current | This is the mean interval between receiving a Register-Stop and allowing Registers to be sent again. A lower value means more frequent register bursts at RP, w… |
| 1.3.6.1.4.1.171.11.78.1.3.10.5.3 | TableswL3pimInfoTable | not-accessible | current | The PIM Information Table contains the PIM related information, like DR priority. |
| 1.3.6.1.4.1.171.11.78.1.3.10.5.3.1 | RowswL3pimInfoEntry | not-accessible | current | An entry in the PIM Information Table. |
| 1.3.6.1.4.1.171.11.78.1.3.10.5.3.1.1 | ColumnswL3pimInterface | not-accessible | current | The ifIndex value of this PIM interface. |
| 1.3.6.1.4.1.171.11.78.1.3.10.5.3.1.2 | ColumnswL3pimDRPriority | read-write | current | The DR Priority is a 32-bit unsigned number and the numerically larger priority is always prefered. A router's idea of the current DR on an interface can chang… |
| 1.3.6.1.4.1.171.11.78.1.3.10.6 | TableswL3pimStaticRPTable | not-accessible | current | The PIM Static RP Table contains the PIM static RP related information, like group address, group mask, RP address and RP row status. |
| 1.3.6.1.4.1.171.11.78.1.3.10.6.1 | RowswL3pimStaticRPEntry | not-accessible | current | An entry in the PIM Static RP Table. |
| 1.3.6.1.4.1.171.11.78.1.3.10.6.1.1 | ColumnswL3pimStaticRPGroupAddress | not-accessible | current | The IP multicast group address which, when combined with swL3pimStaticRPGroupMask, identifies a group prefix for which the local router will advertise itself a… |
| 1.3.6.1.4.1.171.11.78.1.3.10.6.1.2 | ColumnswL3pimStaticRPGroupMask | not-accessible | current | The multicast group address mask which, when combined with swL3pimStaticRPGroupAddress, identifies a group prefix for which the local router will advertise its… |
| 1.3.6.1.4.1.171.11.78.1.3.10.6.1.3 | ColumnswL3pimStaticRPAddress | not-accessible | current | The (unicast) address of the interface which will be advertised as a static RP. |
| 1.3.6.1.4.1.171.11.78.1.3.10.6.1.4 | ColumnswL3pimStaticRPRowStatus | read-create | current | The status of this row, by which new entries may be created, or old entries deleted from this table. |