DES7200-OSPF-MIB
202 objects
This module defines my Ospf mibs.
Imported Objects
| DES7200-SMI | myMgmt |
| DES7200-TC | ConfigStatus IfIndex |
| OSPF-MIB | AreaID DesignatedRouterPriority HelloRange PositiveInteger RouterID Status UpToMaxAge |
| P-BRIDGE-MIB | EnabledStatus |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString MacAddress RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.10.97.2.30 | IdentitymyOspfMIB | This module defines my Ospf mibs. | ||
| 1.3.6.1.4.1.171.10.97.2.30.1 | NodemyOspfMIBObjects | |||
| 1.3.6.1.4.1.171.10.97.2.30.1.1 | NodemyOspfGeneralMibsGroup | |||
| 1.3.6.1.4.1.171.10.97.2.30.1.1.1 | ScalarmyOspfMiniLsaInterval | read-only | current | Minimum LSA interval that the two LSA generate. |
| 1.3.6.1.4.1.171.10.97.2.30.1.1.2 | ScalarmyOspfMiniLsaArrival | read-only | current | Minimum LSA Interval of the two LSA arrival. |
| 1.3.6.1.4.1.171.10.97.2.30.1.1.3 | ScalarmyOspfAreasNum | read-only | current | Number of areas in this router |
| 1.3.6.1.4.1.171.10.97.2.30.1.1.4 | ScalarmyOspfNormalAreasNum | read-only | current | Number of normal areas in this router |
| 1.3.6.1.4.1.171.10.97.2.30.1.1.5 | ScalarmyOspfStubAreasNum | read-only | current | Number of stub areas in this router |
| 1.3.6.1.4.1.171.10.97.2.30.1.1.6 | ScalarmyOspfNssaAreasNum | read-only | current | Number of nssa areas in this router |
| 1.3.6.1.4.1.171.10.97.2.30.1.1.7 | ScalarmyOspfSpfDelay | read-write | current | Ospf Spf shedule time, an integer from 0 to 65535. The default is 5 seconds,0 means no delay. |
| 1.3.6.1.4.1.171.10.97.2.30.1.1.8 | ScalarmyOspfSpfHoldTime | read-write | current | hold time between two Spfs.an integer from 0 to 65535. The default is 10 seconds; 0 means no delay. |
| 1.3.6.1.4.1.171.10.97.2.30.1.1.9 | ScalarmyOspfAutoCostRefBandWidthRef | read-write | current | Set AutoCost bandwidth referenc value in unit of Mbits. Setting this value to 0 indicate that disable the feature of autocost bandwidth referenc. |
| 1.3.6.1.4.1.171.10.97.2.30.1.1.10 | ScalarmyOspfLsaGroupPacing | read-write | current | set the group pacing of LSAs. |
| 1.3.6.1.4.1.171.10.97.2.30.1.1.11 | ScalarmyOspfInterDistance | read-write | current | Set inter-area distance. |
| 1.3.6.1.4.1.171.10.97.2.30.1.1.12 | ScalarmyOspfIntraDistance | read-write | current | Set intra-area distance. |
| 1.3.6.1.4.1.171.10.97.2.30.1.1.13 | ScalarmyOspfExternDistance | read-write | current | Set extern distance. |
| 1.3.6.1.4.1.171.10.97.2.30.1.1.14 | ScalarmyOspfLogAdjChangeNotify | read-write | current | if enabled status is setted, Send syslog message when a neighbor state changes. |
| 1.3.6.1.4.1.171.10.97.2.30.1.1.15 | ScalarmyOspfPassiveStatus | read-write | current | The myOspfIfPassiveStatus of a interface equal to this object value when this interface is created. If you change this object value to 'enabled' or 'disabled'a… |
| 1.3.6.1.4.1.171.10.97.2.30.1.1.16 | ScalarmyOspfRFC1583Compatibility | read-write | current | Controls the preference rules used in calculating AS external routes (RFC2328 Section 16.4) when choosing among multiple AS-external-LSAs advertising the same … |
| 1.3.6.1.4.1.171.10.97.2.30.1.1.17 | ScalarmyOspfRouteRedisDefMetricVal | read-write | current | When this value is setted,Cause the current routing protocol(ospf) to use the same metricvalue for all redistributed routes (BGP, RIP, and OSPF). |
| 1.3.6.1.4.1.171.10.97.2.30.1.1.18 | ScalarmyOspfAdminiDistance | read-write | current | ospf Administrative distance. |
| 1.3.6.1.4.1.171.10.97.2.30.1.2 | TablemyOspfAreaTable | not-accessible | current | Information describing the configured parame- ters and cumulative statistics of the router's attached areas.This table is superset of ospfAreaTable |
| 1.3.6.1.4.1.171.10.97.2.30.1.2.1 | RowmyOspfAreaEntry | not-accessible | current | The entry of myOspfAreaTable. |
| 1.3.6.1.4.1.171.10.97.2.30.1.2.1.1 | ColumnmyOspfAreaId | read-only | current | A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPF backbone. |
| 1.3.6.1.4.1.171.10.97.2.30.1.2.1.2 | ColumnmyOspfAuthType | read-create | current | The authentication type specified for an area. Additional authentication types may be assigned locally on a per Area basis. |
| 1.3.6.1.4.1.171.10.97.2.30.1.2.1.3 | ColumnmyOspfImportAsExtern | read-create | current | The area's support for importing AS external link- state advertisements. |
| 1.3.6.1.4.1.171.10.97.2.30.1.2.1.4 | ColumnmyOspfSpfRuns | read-only | current | The number of times that the intra-area route table has been calculated using this area's link-state database. This is typically done using Dijkstra's algorith… |
| 1.3.6.1.4.1.171.10.97.2.30.1.2.1.5 | ColumnmyOspfAreaBdrRtrCount | read-only | current | The total number of area border routers reach- able within this area. This is initially zero, and is calculated in each SPF Pass. |
| 1.3.6.1.4.1.171.10.97.2.30.1.2.1.6 | ColumnmyOspfAsBdrRtrCount | read-only | current | The total number of Autonomous System border routers reachable within this area. This is initially zero, and is calculated in each SPF Pass. |
| 1.3.6.1.4.1.171.10.97.2.30.1.2.1.7 | ColumnmyOspfAreaLsaCount | read-only | current | The total number of link-state advertisements in this area's link-state database, excluding AS External LSA's. |
| 1.3.6.1.4.1.171.10.97.2.30.1.2.1.8 | ColumnmyOspfAreaLsaCksumSum | read-only | current | The 32-bit unsigned sum of the link-state ad- vertisements' LS checksums contained in this area's link-state database. This sum excludes external (LS type 5) l… |
| 1.3.6.1.4.1.171.10.97.2.30.1.2.1.9 | ColumnmyOspfAreaSummary | read-create | current | The variable ospfAreaSummary controls the im- port of summary LSAs into stub areas. It has no effect on other areas. If it is noAreaSummary, the router will ne… |
| 1.3.6.1.4.1.171.10.97.2.30.1.2.1.10 | ColumnmyOspfAreaStatus | read-create | current | This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is impl… |
| 1.3.6.1.4.1.171.10.97.2.30.1.2.1.11 | ColumnmyOspfAreaInterfaceNum | read-only | current | the interface number of this area |
| 1.3.6.1.4.1.171.10.97.2.30.1.2.1.12 | ColumnmyOspfAreaNssaIsRedistribution | read-create | current | if it's disabled , when the router is an NSSA ABR and you want the redistribute command to import routes into normal areas, but not into the NSSA, this field i… |
| 1.3.6.1.4.1.171.10.97.2.30.1.2.1.13 | ColumnmyOspfAreaNssaIsDefInfoOriginate | read-create | current | if it's enabled it meaning that on an ABR to allow importing type 7 LSAs into the NSSA, this field is valid for nssa area |
| 1.3.6.1.4.1.171.10.97.2.30.1.3 | TablemyOspfAddressScopeTable | not-accessible | current | Define an interface on which OSPF runs and the area ID for that interface. You can use the wildcard-mask to use a single command to define one or more multiple… |
| 1.3.6.1.4.1.171.10.97.2.30.1.3.1 | RowmyOspfAddressScopeEntry | not-accessible | current | the entry define an scope of address for ospf routing. |
| 1.3.6.1.4.1.171.10.97.2.30.1.3.1.1 | ColumnmyOspfNetWorkAreaID | read-only | current | area ID |
| 1.3.6.1.4.1.171.10.97.2.30.1.3.1.2 | ColumnmyOspfNetWorkAddress | read-only | current | Routing for Networks Ipaddress |
| 1.3.6.1.4.1.171.10.97.2.30.1.3.1.3 | ColumnmyOspfNetWorkMask | read-only | current | Routing for Networks mask |
| 1.3.6.1.4.1.171.10.97.2.30.1.3.1.4 | ColumnmyOspfNetWorkStatus | read-create | current | when this value is destroy,the entry will be deleted |
| 1.3.6.1.4.1.171.10.97.2.30.1.4 | TablemyOspfIfTable | not-accessible | current | The OSPF Interface Table describes the interfaces from the viewpoint of OSPF. |
| 1.3.6.1.4.1.171.10.97.2.30.1.4.1 | RowmyOspfIfEntry | not-accessible | current | The OSPF Interface Entry describes one inter- face configuration of OSPF. |
| 1.3.6.1.4.1.171.10.97.2.30.1.4.1.1 | ColumnmyOspfIfIpAddress | read-only | current | The IP address of this OSPF interface. |
| 1.3.6.1.4.1.171.10.97.2.30.1.4.1.2 | ColumnmyOspfAddressLessIf | read-only | current | For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the corr… |
| 1.3.6.1.4.1.171.10.97.2.30.1.4.1.3 | ColumnmyOspfIfAreaId | read-only | current | A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone. |
| 1.3.6.1.4.1.171.10.97.2.30.1.4.1.4 | ColumnmyOspfIfType | read-write | current | The OSPF interface type. By way of a default, this field may be intuited from the corresponding value of ifType. Broad- cast LANs, such as Ethernet and IEEE 80… |
| 1.3.6.1.4.1.171.10.97.2.30.1.4.1.5 | ColumnmyOspfIfAdminStat | read-only | current | The OSPF interface's administrative status. The value formed on the interface, and the in- terface will be advertised as an internal route to some area. The va… |
| 1.3.6.1.4.1.171.10.97.2.30.1.4.1.6 | ColumnmyOspfIfRtrPriority | read-write | current | The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the r… |
| 1.3.6.1.4.1.171.10.97.2.30.1.4.1.7 | ColumnmyOspfIfTransitDelay | read-write | current | The estimated number of seconds it takes to transmit a link state update packet over this interface. |
| 1.3.6.1.4.1.171.10.97.2.30.1.4.1.8 | ColumnmyOspfIfRetransInterval | read-write | current | The number of seconds between link-state ad- vertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitt… |
| 1.3.6.1.4.1.171.10.97.2.30.1.4.1.9 | ColumnmyOspfIfHelloInterval | read-write | current | The length of time, in seconds, between the Hello packets that the router sends on the in- terface. This value must be the same for all routers attached to a c… |
| 1.3.6.1.4.1.171.10.97.2.30.1.4.1.10 | ColumnmyOspfIfRtrDeadInterval | read-write | current | The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hel… |
| 1.3.6.1.4.1.171.10.97.2.30.1.4.1.11 | ColumnmyOspfIfPollInterval | read-only | current | The larger time interval, in seconds, between the Hello packets sent to an inactive non- broadcast multi- access neighbor. |
| 1.3.6.1.4.1.171.10.97.2.30.1.4.1.12 | ColumnmyOspfIfState | read-only | current | The OSPF Interface State. |
| 1.3.6.1.4.1.171.10.97.2.30.1.4.1.13 | ColumnmyOspfIfDesignatedRouter | read-only | current | The IP Address of the interface which connected the local router in the Designated Router. |
| 1.3.6.1.4.1.171.10.97.2.30.1.4.1.14 | ColumnmyOspfIfBackupDesignatedRouter | read-only | current | The IP Address of the interface which connected the local router in the Backup Designated Router. |
| 1.3.6.1.4.1.171.10.97.2.30.1.4.1.15 | ColumnmyOspfIfEvents | read-only | current | The number of times this OSPF interface has changed its state, or an error has occurred. |
| 1.3.6.1.4.1.171.10.97.2.30.1.4.1.16 | ColumnmyOspfIfAuthKey | read-write | current | The Authentication Key. If the Area's Author- ization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero … |
| 1.3.6.1.4.1.171.10.97.2.30.1.4.1.17 | ColumnmyOspfIfStatus | read-only | current | This value will be active(1) always. |
| 1.3.6.1.4.1.171.10.97.2.30.1.4.1.18 | ColumnmyOspfIfMulticastForwarding | read-only | current | The way multicasts should forwarded on this interface; not forwarded, forwarded as data link multicasts, or forwarded as data link uni- casts. Data link multic… |
| 1.3.6.1.4.1.171.10.97.2.30.1.4.1.19 | ColumnmyOspfIfDemand | read-only | current | Indicates whether Demand OSPF procedures (hel- lo supression to FULL neighbors and setting the DoNotAge flag on proogated LSAs) should be per- formed on this i… |
| 1.3.6.1.4.1.171.10.97.2.30.1.4.1.20 | ColumnmyOspfIfAuthType | read-write | current | The authentication type specified for an interface. Setting this value to 'default' means using default authentication type referenced to Area Authentication, … |
| 1.3.6.1.4.1.171.10.97.2.30.1.4.1.21 | ColumnmyOspfIfDatabaseFilterAllOut | read-write | current | Block flooding of OSPF LSA packets to the interface. By default, OSPF floods new LSAs over all interfaces in the same area, except the interface on which the L… |
| 1.3.6.1.4.1.171.10.97.2.30.1.4.1.22 | ColumnmyOspfIfDesignateRouterId | read-only | current | DR RouterID of this interface, when DR does not selected,DR Id is 0.0.0.0 |
| 1.3.6.1.4.1.171.10.97.2.30.1.4.1.23 | ColumnmyOspfIfBackupDesignateRouterId | read-only | current | Backup DR RouterId of this interface , when Backup DR does not selected,BDR Id is 0.0.0.0 |
| 1.3.6.1.4.1.171.10.97.2.30.1.4.1.24 | ColumnmyOspfIfWaitInternal | read-only | current | The wait time of hello generate |
| 1.3.6.1.4.1.171.10.97.2.30.1.4.1.25 | ColumnmyOspfIfPassiveStatus | read-write | current | Setting this object value to 'enabled' ,the interface will become a passive interface. |
| 1.3.6.1.4.1.171.10.97.2.30.1.4.1.26 | ColumnmyOspfIfCurrentUsedMd5AuthKeyId | read-create | current | key-id which current used for md5 authentication,this value is valid from 1 to 255, the value 0 is default value.. |
| 1.3.6.1.4.1.171.10.97.2.30.1.5 | TablemyOspfIfMd5AuthKeyTable | not-accessible | current | Configuration table of the key-id for md5 authentication for OSPF protocol. |
| 1.3.6.1.4.1.171.10.97.2.30.1.5.1 | RowmyOspfIfMd5AuthKeyEntry | not-accessible | current | Configuration entry of the key-id for md5 authentication for OSPF protocol |
| 1.3.6.1.4.1.171.10.97.2.30.1.5.1.1 | ColumnmyOspfIfMd5AuthKeyIf | read-only | current | Corresponding value of ifIndex for interfaces. |
| 1.3.6.1.4.1.171.10.97.2.30.1.5.1.2 | ColumnmyOspfIfMd5AuthKeyId | read-only | current | the key-id for md5 authentication. |
| 1.3.6.1.4.1.171.10.97.2.30.1.5.1.3 | ColumnmyOspfIfMd5AuthKey | read-create | current | The Authentication Key for MD5. When read, myOspfIfMd5AuthKey always returns an Oc- tet String of length zero. |
| 1.3.6.1.4.1.171.10.97.2.30.1.5.1.4 | ColumnmyOspfIfMd5AuthKeySt | read-write | current | Setting this value to 'invalid' will delete this entry. Setting this value to 'valid' will have no effect. |
| 1.3.6.1.4.1.171.10.97.2.30.1.6 | TablemyOspfVirtTable | not-accessible | current | Information about this router's virtual inter- faces.Include ospfVirtIfTable in rfc1850 |
| 1.3.6.1.4.1.171.10.97.2.30.1.6.1 | RowmyOspfVirtEntry | not-accessible | current | Information about a single Virtual Interface |
| 1.3.6.1.4.1.171.10.97.2.30.1.6.1.1 | ColumnmyOspfVirtIfAreaId | read-only | current | The Transit Area that the Virtual Link traverses. By definition, this is not 0.0.0.0 |
| 1.3.6.1.4.1.171.10.97.2.30.1.6.1.2 | ColumnmyOspfVirtIfNeighbor | read-only | current | The Router ID of the Virtual Neighbor. |
| 1.3.6.1.4.1.171.10.97.2.30.1.6.1.3 | ColumnmyOspfVirtIfTransitDelay | read-create | current | The estimated number of seconds it takes to transmit a link- state update packet over this interface. |
| 1.3.6.1.4.1.171.10.97.2.30.1.6.1.4 | ColumnmyOspfVirtIfRetransInterval | read-create | current | The number of seconds between link-state ad- vertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitt… |
| 1.3.6.1.4.1.171.10.97.2.30.1.6.1.5 | ColumnmyOspfVirtIfHelloInterval | read-create | current | The length of time, in seconds, between the Hello packets that the router sends on the in- terface. This value must be the same for the virtual neighbor. |
| 1.3.6.1.4.1.171.10.97.2.30.1.6.1.6 | ColumnmyOspfVirtIfRtrDeadInterval | read-create | current | The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hel… |
| 1.3.6.1.4.1.171.10.97.2.30.1.6.1.7 | ColumnmyOspfVirtIfState | read-only | current | OSPF virtual interface states. |
| 1.3.6.1.4.1.171.10.97.2.30.1.6.1.8 | ColumnmyOspfVirtIfEvents | read-only | current | The number of state changes or error events on this Virtual Link |
| 1.3.6.1.4.1.171.10.97.2.30.1.6.1.9 | ColumnmyOspfVirtIfAuthKey | read-create | current | If Authentication Type is simplePassword, the device will left adjust and zero fill to 8 oc- tets. Note that unauthenticated interfaces need no authentication … |
| 1.3.6.1.4.1.171.10.97.2.30.1.6.1.10 | ColumnmyOspfVirtIfStatus | read-create | current | This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is impl… |
| 1.3.6.1.4.1.171.10.97.2.30.1.6.1.11 | ColumnmyOspfVirtIfAuthType | read-create | current | The authentication type specified for a virtual interface. Setting this value 'default' means using default authentication type referenced to Area Authenticati… |
| 1.3.6.1.4.1.171.10.97.2.30.1.6.1.12 | ColumnmyOspfVirtCost | read-only | current | Explicitly specify the cost of sending a packet on the interface. |
| 1.3.6.1.4.1.171.10.97.2.30.1.6.1.13 | ColumnmyOspfVirtNativeIfIndex | read-only | current | the Interface's Index that The Virtual Link via this interface. |
| 1.3.6.1.4.1.171.10.97.2.30.1.6.1.14 | ColumnmyOspfVirtLinkState | read-only | current | The Virtual Link State is up or down. |
| 1.3.6.1.4.1.171.10.97.2.30.1.6.1.15 | ColumnmyOspfVirtHelloDueIn | read-only | current | the time when hello due in. |
| 1.3.6.1.4.1.171.10.97.2.30.1.6.1.16 | ColumnmyOspfVirtCurrentUsedMd5AuthKeyId | read-write | current | the key-id which current used for md5 authentication,this value is valid from 1 to 255, the value 0 is default value. |
| 1.3.6.1.4.1.171.10.97.2.30.1.7 | TablemyOspfVirtIfMd5AuthKeyTable | not-accessible | current | Configuration table of the key-id for md5 authentication in VirtIf for OSPF protocol. |
| 1.3.6.1.4.1.171.10.97.2.30.1.7.1 | RowmyOspfVirtIfMd5AuthKeyEntry | not-accessible | current | Configuration entry of the key-id for md5 authentication in VirtIf for OSPF protocol |
| 1.3.6.1.4.1.171.10.97.2.30.1.7.1.1 | ColumnmyOspfVirtIfMd5AuthKeyAreaId | read-only | current | The Transit Area that the Virtual Link traverses. By definition, this is not 0.0.0.0 |
| 1.3.6.1.4.1.171.10.97.2.30.1.7.1.2 | ColumnmyOspfVirtIfMd5AuthKeyNeighbor | read-only | current | The Router ID of the Virtual Neighbor. |
| 1.3.6.1.4.1.171.10.97.2.30.1.7.1.3 | ColumnmyOspfVirtIfMd5AuthKeyId | read-only | current | the key-id for md5 authentication. |
| 1.3.6.1.4.1.171.10.97.2.30.1.7.1.4 | ColumnmyOspfVirtIfMd5AuthKey | read-create | current | The Authentication Key for MD5. When read, myOspfVirtIfMd5AuthKey always returns an Oc- tet String of length zero. |
| 1.3.6.1.4.1.171.10.97.2.30.1.7.1.5 | ColumnmyOspfVirtIfMd5AuthKeySt | read-write | current | Setting this value to 'invalid' will delete this entry. Setting this value to 'valid' will have no effect. |
| 1.3.6.1.4.1.171.10.97.2.30.1.8 | NodemyOspfLsaDetailInfoMibsGroup | |||
| 1.3.6.1.4.1.171.10.97.2.30.1.8.1 | TablemyOspfLsdbTable | not-accessible | current | The OSPF Process's Link State Database. |
| 1.3.6.1.4.1.171.10.97.2.30.1.8.1.1 | RowmyOspfLsdbEntry | not-accessible | current | A single Link State Advertisement. |
| 1.3.6.1.4.1.171.10.97.2.30.1.8.1.1.1 | ColumnmyOspfLsdbAreaId | read-only | current | The 32 bit identifier of the Area from which the LSA was received. |
| 1.3.6.1.4.1.171.10.97.2.30.1.8.1.1.2 | ColumnmyOspfLsdbType | read-only | current | The type of the link state advertisement. Each link state type has a separate advertise- ment format. |
| 1.3.6.1.4.1.171.10.97.2.30.1.8.1.1.3 | ColumnmyOspfLsdbLsid | read-only | current | The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being desc… |
| 1.3.6.1.4.1.171.10.97.2.30.1.8.1.1.4 | ColumnmyOspfLsdbRouterId | read-only | current | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| 1.3.6.1.4.1.171.10.97.2.30.1.8.1.1.5 | ColumnmyOspfLsdbSequence | read-only | current | The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is line… |
| 1.3.6.1.4.1.171.10.97.2.30.1.8.1.1.6 | ColumnmyOspfLsdbAge | read-only | current | This field is the age of the link state adver- tisement in seconds. |
| 1.3.6.1.4.1.171.10.97.2.30.1.8.1.1.7 | ColumnmyOspfLsdbChecksum | read-only | current | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can… |
| 1.3.6.1.4.1.171.10.97.2.30.1.8.1.1.8 | ColumnmyOspfLsdbAdvertisement | read-only | current | The entire Link State Advertisement, including its header. |
| 1.3.6.1.4.1.171.10.97.2.30.1.8.1.1.9 | ColumnmyOspfLsdbLinkNum | read-only | current | the link count of this Router Link Lsa , this field is only valid for Router Link Lsa��type 1 LSA) |
| 1.3.6.1.4.1.171.10.97.2.30.1.8.1.1.10 | ColumnmyOspfLsdbPacketLength | read-only | current | the lsa packet length . |
| 1.3.6.1.4.1.171.10.97.2.30.1.8.1.1.11 | ColumnmyOspfSummaryLsaNetworkMask | read-only | current | this field is only useful when ospfLsdbType is type-3 or type-4 or type-7,it's the Lsa's network mask . |
| 1.3.6.1.4.1.171.10.97.2.30.1.8.1.1.12 | ColumnmyOspfSummaryLsaTos0Metric | read-only | current | this field is only useful when ospfLsdbType is type-3 or type-4 or type-7,it's the Lsa's tos0 metric . |
| 1.3.6.1.4.1.171.10.97.2.30.1.8.1.1.13 | ColumnmyOspfNssaLsaDetailMetricType | read-only | current | this field is valid when Lsa is a type-7 LSA. The type of Nssa ernal metric. If bit E is set, the metric specified is a Type 2 external metric. This means the … |
| 1.3.6.1.4.1.171.10.97.2.30.1.8.1.1.14 | ColumnmyOspfNssaLsaDetailForwardAddr | read-only | current | this field is valid when Lsa is a type-7 LSA. Data traffic for the advertised destination will be forwarded to this address. If the Forwarding address is set t… |
| 1.3.6.1.4.1.171.10.97.2.30.1.8.1.1.15 | ColumnmyOspfNssaLsaDetailRouteTag | read-only | current | this field is valid when Lsa is a type-7 LSA. A 32-bit field attached to each external route. This is not used by the OSPF protocol itself. It may be used to c… |
| 1.3.6.1.4.1.171.10.97.2.30.1.8.1.1.16 | ColumnmyOspfLsdbOption | read-only | current | the option field indicate which optional capabilities area associated with the LSA. |
| 1.3.6.1.4.1.171.10.97.2.30.1.8.2 | TablemyOspfExtLsdbTable | not-accessible | current | The OSPF Process's Links State Database. |
| 1.3.6.1.4.1.171.10.97.2.30.1.8.2.1 | RowmyOspfExtLsdbEntry | not-accessible | current | A single Link State Advertisement. |
| 1.3.6.1.4.1.171.10.97.2.30.1.8.2.1.1 | ColumnmyOspfExtLsdbType | read-only | current | The type of the link state advertisement. Each link state type has a separate advertise- ment format. |
| 1.3.6.1.4.1.171.10.97.2.30.1.8.2.1.2 | ColumnmyOspfExtLsdbLsid | read-only | current | The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being desc… |
| 1.3.6.1.4.1.171.10.97.2.30.1.8.2.1.3 | ColumnmyOspfExtLsdbRouterId | read-only | current | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| 1.3.6.1.4.1.171.10.97.2.30.1.8.2.1.4 | ColumnmyOspfExtLsdbSequence | read-only | current | The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is line… |
| 1.3.6.1.4.1.171.10.97.2.30.1.8.2.1.5 | ColumnmyOspfExtLsdbAge | read-only | current | This field is the age of the link state adver- tisement in seconds. |
| 1.3.6.1.4.1.171.10.97.2.30.1.8.2.1.6 | ColumnmyOspfExtLsdbChecksum | read-only | current | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can… |
| 1.3.6.1.4.1.171.10.97.2.30.1.8.2.1.7 | ColumnmyOspfExtLsdbAdvertisement | read-only | current | The entire Link State Advertisement, including its header. |
| 1.3.6.1.4.1.171.10.97.2.30.1.8.2.1.8 | ColumnmyOspfExtLsdbNetworkMask | read-only | current | The IP address mask for the advertised destination. For example, when advertising a class A network the mask 0xff000000 would be used. |
| 1.3.6.1.4.1.171.10.97.2.30.1.8.2.1.9 | ColumnmyOspfExtLsdbMetric | read-only | current | The cost of this route. Interpretation depends on the external type indication. |
| 1.3.6.1.4.1.171.10.97.2.30.1.8.2.1.10 | ColumnmyOspfExtLsdbMetricType | read-only | current | The type of external metric. If bit E is set, the metric specified is a Type 2 external metric. This means the metric is considered larger than any link state … |
| 1.3.6.1.4.1.171.10.97.2.30.1.8.2.1.11 | ColumnmyOspfExtLsdbForwardAddr | read-only | current | Data traffic for the advertised destination will be forwarded to this address. If the Forwarding address is set to 0.0.0.0, data traffic will be forwarded inst… |
| 1.3.6.1.4.1.171.10.97.2.30.1.8.2.1.12 | ColumnmyOspfExtLsdbRouteTag | read-only | current | A 32-bit field attached to each external route. This is not used by the OSPF protocol itself. It may be used to communicate information between AS boundary rou… |
| 1.3.6.1.4.1.171.10.97.2.30.1.8.2.1.13 | ColumnmyOspfExtLsdbOption | read-only | current | the option field indicate which optional capabilities area associated with the LSA. |
| 1.3.6.1.4.1.171.10.97.2.30.1.8.2.1.14 | ColumnmyOspfExtLsdbPacketLength | read-only | current | the lsa packet length . |
| 1.3.6.1.4.1.171.10.97.2.30.1.8.3 | TablemyOspfRouterLsaDetailTable | not-accessible | current | the router Lsa's detail Infromtion. |
| 1.3.6.1.4.1.171.10.97.2.30.1.8.3.1 | RowmyOspfRouterLsaDetailEntry | not-accessible | current | the entry of this table. |
| 1.3.6.1.4.1.171.10.97.2.30.1.8.3.1.1 | ColumnmyOspfRouterLsaDetailLinkID | read-only | current | router lsa's link ID Identifies the object that this router link connects to. Value depends on the link's Type. When connecting to an object that also originat… |
| 1.3.6.1.4.1.171.10.97.2.30.1.8.3.1.2 | ColumnmyOspfRouterLsaDetailLinkType | read-only | current | router lsa's link type A quick description of the router link. One of the following. Note that host routes are classified as links to stub networks with networ… |
| 1.3.6.1.4.1.171.10.97.2.30.1.8.3.1.3 | ColumnmyOspfRouterLsaDetailLinkData | read-only | current | Value again depends on the link's Type field. For connections to stub networks, Link Data specifies the network's IP address mask. For unnumbered point-to-poin… |
| 1.3.6.1.4.1.171.10.97.2.30.1.8.3.1.4 | ColumnmyOspfRouterLsaDetailTos0Metric | read-only | current | TOS0-specific metric information. |
| 1.3.6.1.4.1.171.10.97.2.30.1.8.4 | TablemyOspfNetWorkLsaDetailTable | not-accessible | current | the NetWork Lsa's detail Infromtion. |
| 1.3.6.1.4.1.171.10.97.2.30.1.8.4.1 | RowmyOspfNetWorkLsaDetailEntry | not-accessible | current | the entry of this table. |
| 1.3.6.1.4.1.171.10.97.2.30.1.8.4.1.1 | ColumnmyOspfNetWorkLsaDetailAttachedRouter | read-only | current | The Router IDs of each of the routers attached to the network. Actually, only those routers that are fully adjacent to the Designated Router are listed. The De… |
| 1.3.6.1.4.1.171.10.97.2.30.1.8.4.1.2 | ColumnmyOspfNetWorkLsaDetailNetworkMask | read-only | current | The IP address mask for the network. For example, a class A network would have the mask 0xff000000. |
| 1.3.6.1.4.1.171.10.97.2.30.1.8.5 | TablemyOspfAreaLsaDBSumTable | not-accessible | current | The OSPF Area LSA database summary Infromtion. |
| 1.3.6.1.4.1.171.10.97.2.30.1.8.5.1 | RowmyOspfAreaLsaDBSumEntry | not-accessible | current | the entry of this table. |
| 1.3.6.1.4.1.171.10.97.2.30.1.8.5.1.1 | ColumnmyOspfAreaLsaDBSumAreaId | read-only | current | The area Id. |
| 1.3.6.1.4.1.171.10.97.2.30.1.8.5.1.2 | ColumnmyOspfAreaLsaDBSumLsaType | read-only | current | the entry's entry type. |
| 1.3.6.1.4.1.171.10.97.2.30.1.8.5.1.3 | ColumnmyOspfAreaLsaDBSumCounts | read-only | current | number os this type Lsa in this area , if this type Lsa does not exist,this field is 0. |
| 1.3.6.1.4.1.171.10.97.2.30.1.8.5.1.4 | ColumnmyOspfAreaLsaDBSumDeletes | read-only | current | number os this type Lsa which has been delete in this area , if this type Lsa is not been deleted,this field is 0 |
| 1.3.6.1.4.1.171.10.97.2.30.1.8.5.1.5 | ColumnmyOspfAreaLsaDBSumMaxage | read-only | current | number of this type Lsa which has up to Maxage, if this type Lsa which has up to Maxage does not exist, this field is 0 |
| 1.3.6.1.4.1.171.10.97.2.30.1.8.6 | TablemyOspfLsaDBSumTable | not-accessible | current | LSA database total summary infromtion in the all areas . |
| 1.3.6.1.4.1.171.10.97.2.30.1.8.6.1 | RowmyOspfLsaDBSumEntry | not-accessible | current | the entry of this table. |
| 1.3.6.1.4.1.171.10.97.2.30.1.8.6.1.1 | ColumnmyOspfLsaDBSumLsaType | read-only | current | the table's entry type. |
| 1.3.6.1.4.1.171.10.97.2.30.1.8.6.1.2 | ColumnmyOspfLsaDBSumCounts | read-only | current | total number of this type Lsa in all area . |
| 1.3.6.1.4.1.171.10.97.2.30.1.8.6.1.3 | ColumnmyOspfLsaDBSumDeletes | read-only | current | total number of this type Lsa deleted in all area . |
| 1.3.6.1.4.1.171.10.97.2.30.1.8.6.1.4 | ColumnmyOspfLsaDBSumMaxage | read-only | current | total number of this type Lsa which has been up to max age in all area |
| 1.3.6.1.4.1.171.10.97.2.30.1.9 | TablemyOspfNeighborTable | not-accessible | current | the neighbor detail infomation . |
| 1.3.6.1.4.1.171.10.97.2.30.1.9.1 | RowmyOspfNeighborEntry | not-accessible | current | the entry of this table. |
| 1.3.6.1.4.1.171.10.97.2.30.1.9.1.1 | ColumnmyOspfNbrIpAddr | read-only | current | The IP address this neighbor(neighbor's interface IP address) is using in its IP Source Address. Note that, on addressless links, this will not be 0.0.0.0, but… |
| 1.3.6.1.4.1.171.10.97.2.30.1.9.1.2 | ColumnmyOspfNbrAddressLessIndex | read-only | current | On an interface having an IP Address, zero. On addressless interfaces, the corresponding value of ifIndex in the Internet Standard MIB. On row creation, this c… |
| 1.3.6.1.4.1.171.10.97.2.30.1.9.1.3 | ColumnmyOspfNbrRtrId | read-only | current | A 32-bit integer (represented as a type IpAd- dress) uniquely identifying the neighboring router in the Autonomous System. |
| 1.3.6.1.4.1.171.10.97.2.30.1.9.1.4 | ColumnmyOspfNbrOptions | read-only | current | A Bit Mask corresponding to the neighbor's op- tions field. Bit 0, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. … |
| 1.3.6.1.4.1.171.10.97.2.30.1.9.1.5 | ColumnmyOspfNbrPriority | read-only | current | The priority of this neighbor in the designat- ed router election algorithm. The value 0 sig- nifies that the neighbor is not eligible to be- come the designat… |
| 1.3.6.1.4.1.171.10.97.2.30.1.9.1.6 | ColumnmyOspfNbrState | read-only | current | The State of the relationship with this Neigh- bor. |
| 1.3.6.1.4.1.171.10.97.2.30.1.9.1.7 | ColumnmyOspfNbrEvents | read-only | current | The number of times this neighbor relationship has changed state, or an error has occurred. |
| 1.3.6.1.4.1.171.10.97.2.30.1.9.1.8 | ColumnmyOspfNbrLsRetransQLen | read-only | current | The current length of the retransmission queue. |
| 1.3.6.1.4.1.171.10.97.2.30.1.9.1.9 | ColumnmyOspfNbmaNbrStatus | read-only | current | This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is impl… |
| 1.3.6.1.4.1.171.10.97.2.30.1.9.1.10 | ColumnmyOspfNbmaNbrPermanence | read-only | current | This variable displays the status of the en- try. 'dynamic' and 'permanent' refer to how the neighbor became known. |
| 1.3.6.1.4.1.171.10.97.2.30.1.9.1.11 | ColumnmyOspfNbrHelloSuppressed | read-only | current | Indicates whether Hellos are being suppressed to the neighbor |
| 1.3.6.1.4.1.171.10.97.2.30.1.9.1.12 | ColumnmyOspfNbrDeadTimeDueIn | read-only | current | if in this interval ,hello packet is not been received , the neighbor is recognized dead.if received,it will recovery the dead time which has been setted. |
| 1.3.6.1.4.1.171.10.97.2.30.1.9.1.13 | ColumnmyOspfNbrNeighborUpTime | read-only | current | the time that the neighbor has been up. |
| 1.3.6.1.4.1.171.10.97.2.30.1.9.1.14 | ColumnmyOspfNbrDR | read-only | current | the Designated Router of this neighbor. |
| 1.3.6.1.4.1.171.10.97.2.30.1.9.1.15 | ColumnmyOspfNbrBDR | read-only | current | the Backup Designated Router of this neighbor. |
| 1.3.6.1.4.1.171.10.97.2.30.1.9.1.16 | ColumnmyOspfNbrArea | read-only | current | the area where the neighbor is in. |
| 1.3.6.1.4.1.171.10.97.2.30.1.9.1.17 | ColumnmyOspfNbrRetransmissionNum | read-only | current | the Retransmission times. |
| 1.3.6.1.4.1.171.10.97.2.30.1.9.1.18 | ColumnmyOspfNbrIfState | read-only | current | The neighbor's interface State which connected to local router. |
| 1.3.6.1.4.1.171.10.97.2.30.1.10 | TablemyOspfRouteTable | not-accessible | current | This entity's OSPF border routing table. |
| 1.3.6.1.4.1.171.10.97.2.30.1.10.1 | RowmyOspfRouteEntry | not-accessible | current | A route to a destination. |
| 1.3.6.1.4.1.171.10.97.2.30.1.10.1.1 | ColumnmyOspfRouteDest | read-only | current | Router ID of the destination. |
| 1.3.6.1.4.1.171.10.97.2.30.1.10.1.2 | ColumnmyOspfRouteArea | read-only | current | The area ID of the area from which this route is learned. |
| 1.3.6.1.4.1.171.10.97.2.30.1.10.1.3 | ColumnmyOspfRouteNextHop | read-only | current | Next hop toward the destination. |
| 1.3.6.1.4.1.171.10.97.2.30.1.10.1.4 | ColumnmyOspfRouteCost | read-only | current | Cost of using this route. |
| 1.3.6.1.4.1.171.10.97.2.30.1.10.1.5 | ColumnmyOspfRouteDRType | read-only | current | The router type of the destination; it is either an ABR or ASBR or both. |
| 1.3.6.1.4.1.171.10.97.2.30.1.10.1.6 | ColumnmyOspfRouteType | read-only | current | this field indicate this route is an intral area route or inter area route. |
| 1.3.6.1.4.1.171.10.97.2.30.1.10.1.7 | ColumnmyOspfRouteSpfNo | read-only | current | The internal number of the shortest path first (SPF) calculation that installs this route. |
| 1.3.6.1.4.1.171.10.97.2.30.2 | NodemyOspfMIBConformance | |||
| 1.3.6.1.4.1.171.10.97.2.30.2.1 | NodemyOspfMIBCompliances | |||
| 1.3.6.1.4.1.171.10.97.2.30.2.1.1 | CompliancemyOspfMIBCompliance | current | The compliance statement for entities which implement the My OSPF MIB | |
| 1.3.6.1.4.1.171.10.97.2.30.2.2 | NodemyOspfMIBGroups | |||
| 1.3.6.1.4.1.171.10.97.2.30.2.2.1 | GroupmyOspfBaseMIBGroup | current | A collection of general objects providing OSPF managment. | |
| 1.3.6.1.4.1.171.10.97.2.30.2.2.2 | GroupmyOspfAreaMIBGroup | current | A collection of area objects providing OSPF managment. | |
| 1.3.6.1.4.1.171.10.97.2.30.2.2.3 | GroupmyOspfLsaMIBGroup | current | A collection of OSPF Link State Database objects providing OSPF managment. | |
| 1.3.6.1.4.1.171.10.97.2.30.2.2.4 | GroupmyOspfIfMIBGroup | current | A collection of OSPF interface managment. | |
| 1.3.6.1.4.1.171.10.97.2.30.2.2.5 | GroupmyOspfVirtMIBGroup | current | A collection of OSPF Virtual Link managment. | |
| 1.3.6.1.4.1.171.10.97.2.30.2.2.6 | GroupmyOspfNeighborMIBGroup | current | A collection of OSPF Neighbor information. | |
| 1.3.6.1.4.1.171.10.97.2.30.2.2.7 | GroupmyOspfRouteInfoMIBGroup | current | A collection of OSPF route information. | |
| 1.3.6.1.4.1.171.10.97.2.30.3 | NodeospfMIBConformance | |||
| 1.3.6.1.4.1.171.10.97.2.30.3.1 | NodeospfMIBCompliances | |||
| 1.3.6.1.4.1.171.10.97.2.30.3.1.1 | ComplianceospfExternCompliance | current | The compliance statement for device support of OSPF services. |