DES7200-ROUTE-MIB
108 objects
This module defines my route mibs.
Imported Objects
| DES7200-SMI | myMgmt |
| DES7200-TC | ConfigStatus IfIndex |
| OSPF-MIB | BigMetric |
| P-BRIDGE-MIB | EnabledStatus |
| Q-BRIDGE-MIB | VlanId |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString MacAddress RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.10.97.2.20 | IdentitymyRouteMIB | This module defines my route mibs. | ||
| 1.3.6.1.4.1.171.10.97.2.20.1 | NodemyRouteMIBObjects | |||
| 1.3.6.1.4.1.171.10.97.2.20.1.1 | ScalarmyRouteServiceStatus | read-write | current | Route management function status |
| 1.3.6.1.4.1.171.10.97.2.20.1.2 | TablemyRoutingProtoInfoTable | not-accessible | current | The routing protocol infomation . |
| 1.3.6.1.4.1.171.10.97.2.20.1.2.1 | RowmyRoutingProtoInfoEntry | not-accessible | current | the entry of this table. |
| 1.3.6.1.4.1.171.10.97.2.20.1.2.1.1 | ColumnmyRoutingProtoInfoProtoType | read-only | current | The routing protocol type |
| 1.3.6.1.4.1.171.10.97.2.20.1.2.1.2 | ColumnmyRoutingProtoInfoGateWay | read-only | current | For rip ,the gateway is this router's neighbor. for ospf ,the gateway is the router Id of this router, New entry will be addded when router ID is changed. |
| 1.3.6.1.4.1.171.10.97.2.20.1.2.1.3 | ColumnmyRoutingProtoInfoDistance | read-only | current | The routing protocol distance. |
| 1.3.6.1.4.1.171.10.97.2.20.1.2.1.4 | ColumnmyRoutingProtoInfoLastUpdate | read-only | current | The last update time of the neighbor that be found. or router ID that it last change . |
| 1.3.6.1.4.1.171.10.97.2.20.1.3 | TablemyDefRoutingCfgTable | not-accessible | current | Default routing configuration. |
| 1.3.6.1.4.1.171.10.97.2.20.1.3.1 | RowmyDefRoutingCfgEntry | not-accessible | current | The entry define one routing protocol's default routing configurate,if in rip routing configuration only route map is valid to this default route parameter |
| 1.3.6.1.4.1.171.10.97.2.20.1.3.1.1 | ColumnmyDefRoutingCfgRoutingProtoType | read-only | current | index indicate that which routing protocol configuration mode is current mode. |
| 1.3.6.1.4.1.171.10.97.2.20.1.3.1.2 | ColumnmyDefRoutingCfgAlways | read-create | current | Setting the value to TRUE indicates that always advertise default route. |
| 1.3.6.1.4.1.171.10.97.2.20.1.3.1.3 | ColumnmyDefRoutingCfgMetric | read-create | current | Set ospf default metric value. |
| 1.3.6.1.4.1.171.10.97.2.20.1.3.1.4 | ColumnmyDefRoutingCfgMetricType | read-write | current | Set OSPF Link State type,this value is only valid in ospf configuration |
| 1.3.6.1.4.1.171.10.97.2.20.1.3.1.5 | ColumnmyDefRoutingCfgRouteMap | read-create | current | Set route's Route-map reference.Null string indicate that no any route-map reference. |
| 1.3.6.1.4.1.171.10.97.2.20.1.3.1.6 | ColumnmyDefRoutingCfgStatus | read-create | current | if this value is change to destroy, this entry will be deleted |
| 1.3.6.1.4.1.171.10.97.2.20.2 | NodemyRouteMapMIBObjects | |||
| 1.3.6.1.4.1.171.10.97.2.20.2.1 | TablemyRouteMapTable | not-accessible | current | the route map table. |
| 1.3.6.1.4.1.171.10.97.2.20.2.1.1 | RowmyRouteMapEntry | not-accessible | current | the entry of this table. |
| 1.3.6.1.4.1.171.10.97.2.20.2.1.1.1 | ColumnmyRouteMapName | read-only | current | The route map name ,A meaningful name for the route map. The redistribute router configuration command uses this name to reference the route map. Multiple rout… |
| 1.3.6.1.4.1.171.10.97.2.20.2.1.1.2 | ColumnmyRouteMapSequenceNumber | read-only | current | Number that indicates the position of a new route map in the list of route maps already configured with the same name. |
| 1.3.6.1.4.1.171.10.97.2.20.2.1.1.3 | ColumnmyRouteMapOperType | read-only | current | If permit is specified and the match criteria are met for this route map, the route is redistributed as controlled by the set actions. If deny is specified, th… |
| 1.3.6.1.4.1.171.10.97.2.20.2.1.1.4 | ColumnmyRouteMapMatchMetric | read-create | current | Match the specified route metric. The metric-value can be an IGRP 5-part metric with a value from 1 to 255. 0 indicate that this item will not be matched. |
| 1.3.6.1.4.1.171.10.97.2.20.2.1.1.5 | ColumnmyRouteMapMatchRouteType | read-create | current | the route type value which route-map match, internal: OSPF intra-area and interarea routes or EIGRP internal routes, external: OSPF external routes(Type 1 or T… |
| 1.3.6.1.4.1.171.10.97.2.20.2.1.1.6 | ColumnmyRouteMapMetricValueType | read-create | current | How to modify old metric vlaue. 'noOper': metric value will not be modified. 'replace': old metric value will be replaced by myRouteMapSetMetric. 'add': new me… |
| 1.3.6.1.4.1.171.10.97.2.20.2.1.1.7 | ColumnmyRouteMapSetMetric | read-create | current | Set the metric value to the given redistributed routes (for any protocol except IGRP or EIGRP). The metric value is an integer from 1 to 255. myRouteMapMetricV… |
| 1.3.6.1.4.1.171.10.97.2.20.2.1.1.8 | ColumnmyRouteMapSetLevel | read-create | current | Set the level for routes that are advertised into the specified area of the routing domain. 'all'indicate that routes will be advertised into all type area. |
| 1.3.6.1.4.1.171.10.97.2.20.2.1.1.9 | ColumnmyRouteMapSetMetricType | read-create | current | set metric type, 'external' means IS-IS external metric; 'internal' means Use IGP metric as the MED for BGP; 'type-1 ' means OSPF external type 1 metric; 'type… |
| 1.3.6.1.4.1.171.10.97.2.20.2.1.1.10 | ColumnmyRouteMapSetNexthopSt | read-write | current | How to modify nexthop vlaue. 'invalid': nexthop value will not be modified. 'valid': nexthop value will be modified to myRouteMapSetNexthop. Setting this value… |
| 1.3.6.1.4.1.171.10.97.2.20.2.1.1.11 | ColumnmyRouteMapSetNexthop | read-create | current | Set the nexthop value to give the redistributed routes |
| 1.3.6.1.4.1.171.10.97.2.20.2.1.1.12 | ColumnmyRouteMapStatus | read-create | current | if this value is destroy,the entry will be delete. |
| 1.3.6.1.4.1.171.10.97.2.20.2.2 | TablemyRouteMapMatchIpAddressTable | not-accessible | current | the match ip address item of the route map . |
| 1.3.6.1.4.1.171.10.97.2.20.2.2.1 | RowmyRouteMapMatchIpAddressEntry | not-accessible | current | Match a standard access list by specifying the Acl name |
| 1.3.6.1.4.1.171.10.97.2.20.2.2.1.1 | ColumnmyRouteMapMatchType | read-only | current | destination(1):match route destination ip address nextHop(2):match route nextHop ip address source(3):match route source ip address |
| 1.3.6.1.4.1.171.10.97.2.20.2.2.1.2 | ColumnmyRouteMapMatchIpAddressAclName | read-only | current | The acl name apply to ip address. When this string be used as an index,Value of a sub-identifier equal ASCII value of corresponding character(first sub-identif… |
| 1.3.6.1.4.1.171.10.97.2.20.2.2.1.3 | ColumnmyRouteMapMatchIpAddressStatus | read-create | current | The entry status,if the value is destroy ,the entry will be deleted. |
| 1.3.6.1.4.1.171.10.97.2.20.2.3 | TablemyRouteMapMatchTagTable | not-accessible | current | Match a tag value item of route map |
| 1.3.6.1.4.1.171.10.97.2.20.2.3.1 | RowmyRouteMapMatchTagEntry | not-accessible | current | Match the specified tag value in a list of one or more route tag values. Each can be an integer from 0 to 4294967295. |
| 1.3.6.1.4.1.171.10.97.2.20.2.3.1.1 | ColumnmyRouteMapMatchTagValue | read-only | current | Match the specified tag value. |
| 1.3.6.1.4.1.171.10.97.2.20.2.3.1.2 | ColumnmyRouteMapMatchTagStatus | read-create | current | the entry status,if the value is destroy ,the entry will be deleted. |
| 1.3.6.1.4.1.171.10.97.2.20.2.4 | TablemyRouteMapMatchInterfaceTable | not-accessible | current | Match Interface item of route map . |
| 1.3.6.1.4.1.171.10.97.2.20.2.4.1 | RowmyRouteMapMatchInterfaceEntry | not-accessible | current | Match the specified next hop route out one of the specified interfaces. |
| 1.3.6.1.4.1.171.10.97.2.20.2.4.1.1 | ColumnmyRouteMapMatchInterfaceIfIndex | read-only | current | The ifTable's ifIndex. |
| 1.3.6.1.4.1.171.10.97.2.20.2.4.1.2 | ColumnmyRouteMapMatchInterfaceStatus | read-create | current | the entry status,if the value is destroy ,the entry will be deleted. |
| 1.3.6.1.4.1.171.10.97.2.20.3 | NodemyRouteRedistributeMIBObjects | |||
| 1.3.6.1.4.1.171.10.97.2.20.3.1 | TablemyRouteRedistributeTable | not-accessible | current | this table descripts the redistributing methods. |
| 1.3.6.1.4.1.171.10.97.2.20.3.1.1 | RowmyRouteRedistributeEntry | not-accessible | current | each entry descripts the methord,when Redistribute routes from one routing protocol to another routing protocol. |
| 1.3.6.1.4.1.171.10.97.2.20.3.1.1.1 | ColumnmyRouteRedistributeProtocolCfg | read-only | current | The protocol which the redistributing will be setted in. |
| 1.3.6.1.4.1.171.10.97.2.20.3.1.1.2 | ColumnmyRouteRedistributeProtocol | read-only | current | The protocol which routing will redistribute to . |
| 1.3.6.1.4.1.171.10.97.2.20.3.1.1.3 | ColumnmyRouteRedistributeMetricValue | read-create | current | 0 indicate that redistributing metric value will equal myOspfRouteRedisDefMetricVal for OSPF or myRipOffsetMetric for RIP. Other value indicate that myRouteRed… |
| 1.3.6.1.4.1.171.10.97.2.20.3.1.1.4 | ColumnmyRouteRedistributeMetricType | read-create | current | Metric type value . |
| 1.3.6.1.4.1.171.10.97.2.20.3.1.1.5 | ColumnmyRouteRedistributeTagValue | read-create | current | Set tag for routes redistributed into OSPF. |
| 1.3.6.1.4.1.171.10.97.2.20.3.1.1.6 | ColumnmyRouteRedistributeRouteMapName | read-create | current | Set route's Route-map reference.Null string indicate that no any route-map reference. |
| 1.3.6.1.4.1.171.10.97.2.20.3.1.1.7 | ColumnmyRouteRedistributeStatus | read-create | current | the entry status,if the value is destroy ,then disable this redistribute. |
| 1.3.6.1.4.1.171.10.97.2.20.4 | NodemyRouteFilteringMIBObjects | |||
| 1.3.6.1.4.1.171.10.97.2.20.4.1 | TablemyIpPrefixListTable | not-accessible | current | this table descripts the ip prefix list. |
| 1.3.6.1.4.1.171.10.97.2.20.4.1.1 | RowmyIpPrefixListEntry | not-accessible | current | each entry descripts a prefix list |
| 1.3.6.1.4.1.171.10.97.2.20.4.1.1.1 | ColumnmyIpPrefixListName | read-only | current | name of ip prefix-list name. |
| 1.3.6.1.4.1.171.10.97.2.20.4.1.1.2 | ColumnmyIpPrefixListSequence | read-only | current | sequence can be set either automatically or manually. if 0 is seted,that means sequence will be created automatically. In the case that sequential numbers are … |
| 1.3.6.1.4.1.171.10.97.2.20.4.1.1.3 | ColumnmyIpPrefixListOperMethod | read-write | current | this field specifies whether the prefix for this entry is to permit or deny the listed prefix. |
| 1.3.6.1.4.1.171.10.97.2.20.4.1.1.4 | ColumnmyIpPrefixListIpAddress | read-write | current | ip prefix-list ip address. |
| 1.3.6.1.4.1.171.10.97.2.20.4.1.1.5 | ColumnmyIpPrefixListMaskLength | read-write | current | ip prefix-list mask length. |
| 1.3.6.1.4.1.171.10.97.2.20.4.1.1.6 | ColumnmyIpPrefixListMinimumPrefixLength | read-write | current | this field specifies prefix length. The prefix list will be applied if the prefix length is greater than or equal to myIpPrefixListMinimumPrefixLength. value '… |
| 1.3.6.1.4.1.171.10.97.2.20.4.1.1.7 | ColumnmyIpPrefixListMaximumPrefixLength | read-write | current | this field specifies prefix length. The prefix list will be applied if the prefix length is less than or equal to myIpPrefixListMaximumPrefixLength. value '0' … |
| 1.3.6.1.4.1.171.10.97.2.20.4.1.1.8 | ColumnmyIpPrefixListStatus | read-create | current | the entry status,if the value is destroy ,then delete this ip prefix-list. |
| 1.3.6.1.4.1.171.10.97.2.20.4.2 | TablemyDistributeListTable | not-accessible | current | this table descripts the distribute list. |
| 1.3.6.1.4.1.171.10.97.2.20.4.2.1 | RowmyDistributeListEntry | not-accessible | current | distribute-list can be applied to both incoming and outgoing routing information,Permit or deny routes from being advertised in routing updates depending upon … |
| 1.3.6.1.4.1.171.10.97.2.20.4.2.1.1 | ColumnmyDistributeListCfgProtoType | read-only | current | This index indicate that which routing protocol configuration mode is current mode. |
| 1.3.6.1.4.1.171.10.97.2.20.4.2.1.2 | ColumnmyDistributeListIfIndex | read-only | current | The interface that this distribute list apply to. If this value is 0,it indicate that this distribute list apply in all interfaces. Other value is equal to TEX… |
| 1.3.6.1.4.1.171.10.97.2.20.4.2.1.3 | ColumnmyDistributeListDirection | read-only | current | If direct is 'in' the distribute list is applied to input packets�� If direct is 'out' the distribute list is applied to output packets. |
| 1.3.6.1.4.1.171.10.97.2.20.4.2.1.4 | ColumnmyDistributeListFilteringProtocol | read-only | current | If this value is 0,it indicate that this distribute list will apply on all protocol. Other value is equal to TEXTUAL-CONVENTION 'MyRouteProtoType' meaning, it … |
| 1.3.6.1.4.1.171.10.97.2.20.4.2.1.5 | ColumnmyDistributeListFilterType | read-write | current | this field defines the filtering type which distribute-list used , 'acl' means filtering destination ip address of route information in incoming or outing pack… |
| 1.3.6.1.4.1.171.10.97.2.20.4.2.1.6 | ColumnmyDistributeListAclName | read-write | current | This field is valid when the field myDistributeListFilterType's value is 'acl',it's access list name that distribute-list reference to. Null string indicate th… |
| 1.3.6.1.4.1.171.10.97.2.20.4.2.1.7 | ColumnmyDistributeListGateWayIpPrefixName | read-write | current | this field is valid when the field myDistributeListFilterType's value is 'gateway',it's ip prefix list name that distribute-list source ip and mask reference t… |
| 1.3.6.1.4.1.171.10.97.2.20.4.2.1.8 | ColumnmyDistributeListPrefixIpPrefixName | read-write | current | this field is valid when the field myDistributeListFilterType's value is 'gateway',it's ip prefix list name that distribute-list destination ip and mask refere… |
| 1.3.6.1.4.1.171.10.97.2.20.4.2.1.9 | ColumnmyDistributeListStatus | read-create | current | the entry status,if the value is destroy ,then delete this distribute-list. |
| 1.3.6.1.4.1.171.10.97.2.20.5 | NodemyipCidrRouteExtendMIBObjects | |||
| 1.3.6.1.4.1.171.10.97.2.20.5.1 | TablemyipCidrRouteTable | not-accessible | current | This entity's IP Routing table. |
| 1.3.6.1.4.1.171.10.97.2.20.5.1.1 | RowmyipCidrRouteEntry | not-accessible | current | A particular route to a particular destina- tion, under a particular policy. |
| 1.3.6.1.4.1.171.10.97.2.20.5.1.1.1 | ColumnmyipCidrRouteDest | read-only | current | The destination IP address of this route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance o… |
| 1.3.6.1.4.1.171.10.97.2.20.5.1.1.2 | ColumnmyipCidrRouteMask | read-only | current | Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the ipCidrRouteDest field. For those systems that do n… |
| 1.3.6.1.4.1.171.10.97.2.20.5.1.1.3 | ColumnmyipCidrRouteTos | read-only | current | The policy specifier is the IP TOS Field. The encoding of IP TOS is as specified by the following convention. Zero indicates the default path if no more specif… |
| 1.3.6.1.4.1.171.10.97.2.20.5.1.1.4 | ColumnmyipCidrRouteNextHop | read-only | current | On remote routes, the address of the next sys- tem en route; Otherwise, 0.0.0.0. |
| 1.3.6.1.4.1.171.10.97.2.20.5.1.1.5 | ColumnmyipCidrRouteIfIndex | read-create | current | The ifIndex value which identifies the local interface through which the next hop of this route should be reached. |
| 1.3.6.1.4.1.171.10.97.2.20.5.1.1.6 | ColumnmyipCidrRouteType | read-create | current | The type of route. Note that local(3) refers to a route for which the next hop is the final destination; remote(4) refers to a route for which the next hop is … |
| 1.3.6.1.4.1.171.10.97.2.20.5.1.1.7 | ColumnmyipCidrRouteProto | read-only | current | The routing mechanism via which this route was learned. Inclusion of values for gateway rout- ing protocols is not intended to imply that hosts should support … |
| 1.3.6.1.4.1.171.10.97.2.20.5.1.1.8 | ColumnmyipCidrRouteAge | read-only | current | The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except throug… |
| 1.3.6.1.4.1.171.10.97.2.20.5.1.1.9 | ColumnmyipCidrRouteInfo | read-create | current | A reference to MIB definitions specific to the particular routing protocol which is responsi- ble for this route, as determined by the value specified in the r… |
| 1.3.6.1.4.1.171.10.97.2.20.5.1.1.10 | ColumnmyipCidrRouteNextHopAS | read-create | current | The Autonomous System Number of the Next Hop. The semantics of this object are determined by the routing-protocol specified in the route's ipCidrRouteProto val… |
| 1.3.6.1.4.1.171.10.97.2.20.5.1.1.11 | ColumnmyipCidrRouteMetric1 | read-create | current | The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipCidrRouteProto value.… |
| 1.3.6.1.4.1.171.10.97.2.20.5.1.1.12 | ColumnmyipCidrRouteMetric2 | read-create | current | An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipCidrRouteProto value… |
| 1.3.6.1.4.1.171.10.97.2.20.5.1.1.13 | ColumnmyipCidrRouteMetric3 | read-create | current | An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipCidrRouteProto value… |
| 1.3.6.1.4.1.171.10.97.2.20.5.1.1.14 | ColumnmyipCidrRouteMetric4 | read-create | current | An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipCidrRouteProto value… |
| 1.3.6.1.4.1.171.10.97.2.20.5.1.1.15 | ColumnmyipCidrRouteMetric5 | read-create | current | An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipCidrRouteProto value… |
| 1.3.6.1.4.1.171.10.97.2.20.5.1.1.16 | ColumnmyipCidrRouteStatus | read-create | current | The row status variable, used according to row installation and removal conventions. |
| 1.3.6.1.4.1.171.10.97.2.20.5.1.1.17 | ColumnmyipCidrOspfRouteType | read-only | current | this field describles the ospf route entry's type, it's valid when this route was learned by ospf protocol. |
| 1.3.6.1.4.1.171.10.97.2.20.6 | NodemyRouteMIBConformance | |||
| 1.3.6.1.4.1.171.10.97.2.20.6.1 | NodemyRouteMIBCompliances | |||
| 1.3.6.1.4.1.171.10.97.2.20.6.1.1 | CompliancemyRouteMIBCompliance | current | The compliance statement for entities which implement the My Route MIB | |
| 1.3.6.1.4.1.171.10.97.2.20.6.2 | NodemyRouteMIBGroups | |||
| 1.3.6.1.4.1.171.10.97.2.20.6.2.1 | GroupmyRouteMIBGroup | current | A collection of objects providing route managment. | |
| 1.3.6.1.4.1.171.10.97.2.20.6.2.2 | GroupmyRouteInfoMIBGroup | current | A collection of objects providing route information for all routing protocol. | |
| 1.3.6.1.4.1.171.10.97.2.20.6.2.3 | GroupmyRouteMapMIBGroup | current | A collection of objects providing route managment. | |
| 1.3.6.1.4.1.171.10.97.2.20.6.2.4 | GroupmyRouteRedistributeMIBGroup | current | A collection of objects providing route Redistributting. | |
| 1.3.6.1.4.1.171.10.97.2.20.6.2.5 | GroupmyRouteFilteringMibGroup | current | A collection of objects providing route distribute-list. | |
| 1.3.6.1.4.1.171.10.97.2.20.6.2.6 | GroupmyipCidrRouteMibGroup | current | A collection of objects providing CIDR Route Table. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| MyRouteProtoType | INTEGER { other(1), local(2), netmgmt(3), icmp(4), egp(5), ggp(6), hello(7), rip(8), isis(9), esis(10), ciscoigrp(11), bbnspfigp(12), ospf(13), bgp(14), idpr(15), ciscoeigrp(16), max(17) } | current | Routing protocol type. |