DGS-3620-28SC-DC-L2MGMT-MIB
188 objects
The Structure of Layer 2 Network Management Information.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.11.118.9.2 | IdentityswL2MgmtMIB | The Structure of Layer 2 Network Management Information. | ||
| 1.3.6.1.4.1.171.11.118.9.2.1 | NodeswL2DevMgmt | |||
| 1.3.6.1.4.1.171.11.118.9.2.1.1 | NodeswL2DevInfo | |||
| 1.3.6.1.4.1.171.11.118.9.2.1.1.1 | ScalarswDevInfoTotalNumOfPort | read-only | current | The number of ports within this switch. This value is the sum of the ports within this switch. |
| 1.3.6.1.4.1.171.11.118.9.2.1.1.2 | ScalarswDevInfoNumOfPortInUse | read-only | current | The number of ports in this switch connected to the segment or the end stations. |
| 1.3.6.1.4.1.171.11.118.9.2.1.2 | NodeswL2DevCtrl | |||
| 1.3.6.1.4.1.171.11.118.9.2.1.2.5 | ScalarswL2DevCtrlSnmpTrapState | read-write | current | This object controls the SNMP trap status. |
| 1.3.6.1.4.1.171.11.118.9.2.1.2.6 | ScalarswL2DevCtrlCleanAllStatisticCounter | read-write | current | When the object is set to active, all statistical counters will be cleared. If set to normal, no action will occur. |
| 1.3.6.1.4.1.171.11.118.9.2.1.2.7 | ScalarswL2DevCtrlVlanIdOfFDBTbl | read-write | current | Indicates the VLAN ID to which the Dot1dTpFdbTable belongs; The default value is the DEFAULT_VLAN_ID of the system. |
| 1.3.6.1.4.1.171.11.118.9.2.1.2.8 | ScalarswL2MACNotifyState | read-write | current | This object can enable or disable MAC Notification. |
| 1.3.6.1.4.1.171.11.118.9.2.1.2.9 | ScalarswL2MACNotifyHistorySize | read-write | current | This object indicates the history size of MAC addresses in the MAC Address table. The default value is 1. |
| 1.3.6.1.4.1.171.11.118.9.2.1.2.10 | ScalarswL2MACNotifyInterval | read-write | current | This object indicates the time interval, in seconds, that will trigger MAC notification messages. |
| 1.3.6.1.4.1.171.11.118.9.2.1.2.13 | ScalarswL2DevCtrlAsymVlanState | read-write | current | This object enables or disables asymmetric VLANs during the runtime of the system. |
| 1.3.6.1.4.1.171.11.118.9.2.1.2.14 | NodeswL2DevCtrlTelnet | |||
| 1.3.6.1.4.1.171.11.118.9.2.1.2.14.1 | ScalarswL2DevCtrlTelnetState | read-write | current | This object controls the Telnet status. |
| 1.3.6.1.4.1.171.11.118.9.2.1.2.14.2 | ScalarswL2DevCtrlTelnetTcpPort | read-write | current | This object designates TCP ports. When Telnet is disabled, this object is not accessible. |
| 1.3.6.1.4.1.171.11.118.9.2.1.2.16 | ScalarswL2DevCtrlManagementVlanId | read-write | current | This object controls which previously created VLANs are included in the System IP Interface. |
| 1.3.6.1.4.1.171.11.118.9.2.1.2.17 | NodeswL2DevCtrlWeb | |||
| 1.3.6.1.4.1.171.11.118.9.2.1.2.17.1 | ScalarswL2DevCtrlWebState | read-write | current | This object controls the Web status. |
| 1.3.6.1.4.1.171.11.118.9.2.1.2.17.2 | ScalarswL2DevCtrlWebTcpPort | read-write | current | This object designates TCP ports. When Web is disabled, this object is not accessible. |
| 1.3.6.1.4.1.171.11.118.9.2.1.2.18 | ScalarswL2DevCtrlLLDPState | read-write | current | Specifies the state of the LLDP function. When this function is enabled, the switch can start to transmit LLDP packets and receive and process the LLDP packets… |
| 1.3.6.1.4.1.171.11.118.9.2.1.2.19 | ScalarswL2DevCtrlLLDPForwardMessageState | read-write | current | When lldp is disabled and lldp forward_message's are enabled, the LLDP Data Unit packets received by the switch will be forwarded. |
| 1.3.6.1.4.1.171.11.118.9.2.1.2.20 | ScalarswL2DevCtrlIpAutoconfig | read-write | current | This object controls the IP auto configuration state. |
| 1.3.6.1.4.1.171.11.118.9.2.1.2.21 | NodeswL2DevCtrlCFM | |||
| 1.3.6.1.4.1.171.11.118.9.2.1.2.21.1 | ScalarswL2DevCtrlCFMState | read-write | current | This object indicates the CFM global state. |
| 1.3.6.1.4.1.171.11.118.9.2.1.2.21.2 | TableswL2DevCtrlCFMPortTable | not-accessible | current | A table containing the CFM state of specified ports. |
| 1.3.6.1.4.1.171.11.118.9.2.1.2.21.2.1 | RowswL2DevCtrlCFMPortEntry | not-accessible | current | The entry of the CFM state on specified ports. |
| 1.3.6.1.4.1.171.11.118.9.2.1.2.21.2.1.1 | ColumnswL2DevCtrlCFMPortIndex | not-accessible | current | This object indicates the port number. |
| 1.3.6.1.4.1.171.11.118.9.2.1.2.21.2.1.2 | ColumnswL2DevCtrlCFMPortState | read-write | current | This object indicates the CFM state by port. |
| 1.3.6.1.4.1.171.11.118.9.2.1.2.21.3 | TableswL2DevCtrlCFMMaTable | not-accessible | current | A table containing the CFM mode of specified MAs. |
| 1.3.6.1.4.1.171.11.118.9.2.1.2.21.3.1 | RowswL2DevCtrlCFMMaEntry | not-accessible | current | The entry of the CFM mode on specified MAs. |
| 1.3.6.1.4.1.171.11.118.9.2.1.2.21.3.1.1 | ColumnswL2DevCtrlCFMMaMode | read-write | current | This object indicates the CFM mode by MA. |
| 1.3.6.1.4.1.171.11.118.9.2.1.2.21.4 | TableswL2DevCtrlCFMMepTable | not-accessible | current | A table containing the CFM mode of specified MEPs. |
| 1.3.6.1.4.1.171.11.118.9.2.1.2.21.4.1 | RowswL2DevCtrlCFMMepEntry | not-accessible | current | The entry of the CFM mode on specified MEPs. |
| 1.3.6.1.4.1.171.11.118.9.2.1.2.21.4.1.1 | ColumnswL2DevCtrlCFMMepMode | read-only | current | This object indicates the CFM mode by MEP. |
| 1.3.6.1.4.1.171.11.118.9.2.1.2.22 | ScalarswL2DevCtrlVLANTrunkState | read-write | current | This indicates the global state of the VLAN trunking feature of the device. |
| 1.3.6.1.4.1.171.11.118.9.2.1.3 | NodeswL2DevAlarm | |||
| 1.3.6.1.4.1.171.11.118.9.2.1.3.1 | ScalarswL2DevAlarmNewRoot | read-write | current | When the device has become the new root of the Spanning Tree, this object decides whether to send a new root trap. |
| 1.3.6.1.4.1.171.11.118.9.2.1.3.2 | ScalarswL2DevAlarmTopologyChange | read-write | current | This object determines whether or not to send a trap message when the switch topology changes. If the object is enabled (3), the Topology Change trap is sent b… |
| 1.3.6.1.4.1.171.11.118.9.2.1.3.3 | ScalarswL2DevAlarmLinkChange | read-write | current | This object determines whether or not to send a trap message when the link changes. If the object is enabled (3), the Link Change trap is sent by the device wh… |
| 1.3.6.1.4.1.171.11.118.9.2.2 | NodeswL2VLANMgmt | |||
| 1.3.6.1.4.1.171.11.118.9.2.2.1 | TableswL2VlanStaticTable | not-accessible | current | A table containing static configuration information for each VLAN configured into the device by (local or network) management. All entries are permanent and wi… |
| 1.3.6.1.4.1.171.11.118.9.2.2.1.1 | RowswL2VlanStaticEntry | not-accessible | current | Static information for a VLAN configured into this device by (local or network) management. |
| 1.3.6.1.4.1.171.11.118.9.2.2.1.1.1 | ColumnswL2VlanIndex | not-accessible | current | The VLAN-ID or other identifier referring to this VLAN. |
| 1.3.6.1.4.1.171.11.118.9.2.2.1.1.2 | ColumnswL2VLANAdvertisement | read-write | current | This object indicates if the advertisement is active or not. |
| 1.3.6.1.4.1.171.11.118.9.2.2.2 | ScalarswL2PVIDAutoAssignmentState | read-write | current | This object controls the PVID auto assignment state. If 'Auto-assign PVID' is disabled, the PVID can only be changed by PVID configuration (user changes explic… |
| 1.3.6.1.4.1.171.11.118.9.2.2.3 | TableswL2VlanPortInfoTable | not-accessible | current | A table containing the VLAN and port role information of each port. |
| 1.3.6.1.4.1.171.11.118.9.2.2.3.1 | RowswL2VlanPortInfoEntry | not-accessible | current | The table entry of VLAN port information. |
| 1.3.6.1.4.1.171.11.118.9.2.2.3.1.1 | ColumnswL2VlanPortInfoPortIndex | read-only | current | The port index. |
| 1.3.6.1.4.1.171.11.118.9.2.2.3.1.2 | ColumnswL2VlanPortInfoVid | read-only | current | The VLAN ID assigned to a special port |
| 1.3.6.1.4.1.171.11.118.9.2.2.3.1.3 | ColumnswL2VlanPortInfoPortRole | read-only | current | The port role of a special port. When the role is 'other', it means this port does not belong to the VLAN. |
| 1.3.6.1.4.1.171.11.118.9.2.2.6 | ScalarswL2NniGvrpBpduAddress | read-write | current | Specifies the GVRP's BPDU MAC address of the NNI port with Q-in-Q status. |
| 1.3.6.1.4.1.171.11.118.9.2.3 | NodeswL2PortMgmt | |||
| 1.3.6.1.4.1.171.11.118.9.2.3.1 | TableswL2PortInfoTable | not-accessible | current | A table that contains information about every port. |
| 1.3.6.1.4.1.171.11.118.9.2.3.1.1 | RowswL2PortInfoEntry | not-accessible | current | A list of information for each port of the device. |
| 1.3.6.1.4.1.171.11.118.9.2.3.1.1.1 | ColumnswL2PortInfoPortIndex | read-only | current | This object indicates the module's port number.(1..Max port number in the module) |
| 1.3.6.1.4.1.171.11.118.9.2.3.1.1.2 | ColumnswL2PortInfoMediumType | read-only | current | Indicates the medium type of the port number. |
| 1.3.6.1.4.1.171.11.118.9.2.3.1.1.3 | ColumnswL2PortInfoUnitID | read-only | current | Indicates the ID of the unit in the system. |
| 1.3.6.1.4.1.171.11.118.9.2.3.1.1.4 | ColumnswL2PortInfoType | read-only | current | This object indicates the connector type of this port. |
| 1.3.6.1.4.1.171.11.118.9.2.3.1.1.5 | ColumnswL2PortInfoLinkStatus | read-only | current | This object indicates the port link status. |
| 1.3.6.1.4.1.171.11.118.9.2.3.1.1.6 | ColumnswL2PortInfoNwayStatus | read-only | current | This object indicates the port speed and duplex mode. |
| 1.3.6.1.4.1.171.11.118.9.2.3.1.1.8 | ColumnswL2PortInfoErrorDisabled | read-only | current | This object indicates the blocking type of this port. |
| 1.3.6.1.4.1.171.11.118.9.2.3.2 | TableswL2PortCtrlTable | not-accessible | current | A table that contains control information about every port. |
| 1.3.6.1.4.1.171.11.118.9.2.3.2.1 | RowswL2PortCtrlEntry | not-accessible | current | A list of control information for each port on the device. |
| 1.3.6.1.4.1.171.11.118.9.2.3.2.1.1 | ColumnswL2PortCtrlPortIndex | read-only | current | This object indicates the module's port number.(1..Max port number in the module) |
| 1.3.6.1.4.1.171.11.118.9.2.3.2.1.2 | ColumnswL2PortCtrlMediumType | read-only | current | Indicates the medium type of the port number. |
| 1.3.6.1.4.1.171.11.118.9.2.3.2.1.3 | ColumnswL2PortCtrlUnitIndex | read-only | current | Indicates the ID of the unit in the device |
| 1.3.6.1.4.1.171.11.118.9.2.3.2.1.4 | ColumnswL2PortCtrlAdminState | read-write | current | This object decides if the port is enabled or disabled. |
| 1.3.6.1.4.1.171.11.118.9.2.3.2.1.5 | ColumnswL2PortCtrlNwayState | read-write | current | Chose the port speed, duplex mode, and N-Way function mode. |
| 1.3.6.1.4.1.171.11.118.9.2.3.2.1.6 | ColumnswL2PortCtrlFlowCtrlState | read-write | current | The flow control mechanism is different between full duplex mode and half duplex mode. For half duplex mode, the jamming signal is asserted. For full duplex mo… |
| 1.3.6.1.4.1.171.11.118.9.2.3.2.1.7 | ColumnswL2PortCtrlLearningState | read-write | current | This object decides if the port is locked or not. |
| 1.3.6.1.4.1.171.11.118.9.2.3.2.1.8 | ColumnswL2PortCtrlMACNotifyState | read-write | current | This object sets each port's MAC notification state. |
| 1.3.6.1.4.1.171.11.118.9.2.3.2.1.10 | ColumnswL2PortCtrlMDIXState | read-write | current | This object configures the MDIX setting of the port. |
| 1.3.6.1.4.1.171.11.118.9.2.3.3 | ScalarswL2PortCtrlJumboFrame | read-write | current | This object configures the switch's jumbo frame settings. |
| 1.3.6.1.4.1.171.11.118.9.2.3.4 | ScalarswL2PortCtrlJumboFrameMaxSize | read-only | current | This object describes how many bytes the max jumbo frame is. |
| 1.3.6.1.4.1.171.11.118.9.2.3.6 | TableswL2PortCounterCtrlTable | not-accessible | current | A table that is used to clear counter information about every port. |
| 1.3.6.1.4.1.171.11.118.9.2.3.6.1 | RowswL2PortCounterCtrlEntry | not-accessible | current | A list of entries used to clear the counter information for each port of the device. |
| 1.3.6.1.4.1.171.11.118.9.2.3.6.1.1 | ColumnswL2PortCounterCtrlPortIndex | read-only | current | This object indicates the module's port number.(1..Max port number in the module) |
| 1.3.6.1.4.1.171.11.118.9.2.3.6.1.2 | ColumnswL2PortCounterClearCtrl | read-write | current | This object indicates whether to clear the counters for each port of the device or not. |
| 1.3.6.1.4.1.171.11.118.9.2.3.9 | TableswL2PortDropCounterTable | not-accessible | current | A table that contains received error statistic information for each port. |
| 1.3.6.1.4.1.171.11.118.9.2.3.9.1 | RowswL2PortDropCounterEntry | not-accessible | current | A list of information for each port received drop counter. |
| 1.3.6.1.4.1.171.11.118.9.2.3.9.1.1 | ColumnswL2PortDropCounterPortIndex | read-only | current | This object indicates the module's port number.(1..Max port number in the module) |
| 1.3.6.1.4.1.171.11.118.9.2.3.9.1.2 | ColumnswL2PortBufferFullDrops | read-only | current | The total number of packets discarded while input buffer full. |
| 1.3.6.1.4.1.171.11.118.9.2.3.9.1.3 | ColumnswL2PortACLDrops | read-only | current | The total number of received packets denied by ACLs. |
| 1.3.6.1.4.1.171.11.118.9.2.3.9.1.4 | ColumnswL2PortMulticastDrops | read-only | current | The total number of received multicast packet that is discarded. |
| 1.3.6.1.4.1.171.11.118.9.2.3.9.1.5 | ColumnswL2PortVLANIngressDrops | read-only | current | The total number of packets discarded by VLAN ingress checking. |
| 1.3.6.1.4.1.171.11.118.9.2.3.9.1.7 | ColumnswL2PortInvalidIPv6Drops | read-only | current | The total number of packets discarded by IPv6 L3 |
| 1.3.6.1.4.1.171.11.118.9.2.3.9.1.8 | ColumnswL2PortSTPDrops | read-only | current | The total number of packets discarded when ingress port is not in forwarding state. |
| 1.3.6.1.4.1.171.11.118.9.2.3.9.1.9 | ColumnswL2PortStormAndFDBDiscard | read-only | current | The total number of packets discarded by receiving policy (i.e. DST_DISCARD, SRC_DISCARD,RATE_CONTROL, etc.) |
| 1.3.6.1.4.1.171.11.118.9.2.3.9.1.10 | ColumnswL2PortMTUDrops | read-only | current | The total number of packets discarded by frames received, which exceeds Maximum Frame in length and contains a valid or invalid FCS. |
| 1.3.6.1.4.1.171.11.118.9.2.3.10 | TableswL2PortJumboFrameCtrlTable | not-accessible | current | A table that contains information for each port's jumbo frame information. |
| 1.3.6.1.4.1.171.11.118.9.2.3.10.1 | RowswL2PortJumboFrameCtrlEntry | not-accessible | current | A list of information for each port's jumbo frame of the device. |
| 1.3.6.1.4.1.171.11.118.9.2.3.10.1.1 | ColumnswL2PortJumboFrameCtrlPortIndex | read-only | current | This object indicates the module's port number.(1..Max port number in the module) |
| 1.3.6.1.4.1.171.11.118.9.2.3.10.1.2 | ColumnswL2PortJumboFrameCtrlPortState | read-write | current | This object indicates if the port's jumbo frame is enabled or disabled. |
| 1.3.6.1.4.1.171.11.118.9.2.3.11 | TableswL2PortSfpInfoTable | not-accessible | current | A table that contains information for each sfp pluged in port. |
| 1.3.6.1.4.1.171.11.118.9.2.3.11.1 | RowswL2PortSfpInfoEntry | not-accessible | current | A list of information for each sfp pluged in port. |
| 1.3.6.1.4.1.171.11.118.9.2.3.11.1.1 | ColumnswL2PortSfpInfoPortIndex | read-only | current | This object indicates the module's port number.(1..Max port number in the module) |
| 1.3.6.1.4.1.171.11.118.9.2.3.11.1.2 | ColumnswL2PortSfpInfoConnectType | read-only | current | The ConnectType of sfp informaiton. |
| 1.3.6.1.4.1.171.11.118.9.2.3.11.1.3 | ColumnswL2PortSfpInfoVendorName | read-only | current | The vendor name of sfp informaiton. |
| 1.3.6.1.4.1.171.11.118.9.2.3.11.1.4 | ColumnswL2PortSfpInfoVendorPN | read-only | current | The vendor PN of sfp informaiton. |
| 1.3.6.1.4.1.171.11.118.9.2.3.11.1.5 | ColumnswL2PortSfpInfoVendorSN | read-only | current | The vendor SN of sfp informaiton. |
| 1.3.6.1.4.1.171.11.118.9.2.3.11.1.6 | ColumnswL2PortSfpInfoVendorOUI | read-only | current | The vendor OUI of sfp information. |
| 1.3.6.1.4.1.171.11.118.9.2.3.11.1.7 | ColumnswL2PortSfpInfoVendorRev | read-only | current | The vendor Rev of sfp information. |
| 1.3.6.1.4.1.171.11.118.9.2.3.11.1.8 | ColumnswL2PortSfpInfoDateCode | read-only | current | The date code of sfp information. |
| 1.3.6.1.4.1.171.11.118.9.2.3.11.1.9 | ColumnswL2PortSfpInfoFiberType | read-only | current | The fiber type of sfp information. |
| 1.3.6.1.4.1.171.11.118.9.2.3.11.1.10 | ColumnswL2PortSfpInfoBaudRate | read-only | current | The baud rate of sfp information. |
| 1.3.6.1.4.1.171.11.118.9.2.3.11.1.11 | ColumnswL2PortSfpInfoWavelength | read-only | current | The wavelength of sfp information. |
| 1.3.6.1.4.1.171.11.118.9.2.3.12 | TableswL2PortStatisTable | not-accessible | current | A table that contains information for each port statis counter. |
| 1.3.6.1.4.1.171.11.118.9.2.3.12.1 | RowswL2PortStatisEntry | not-accessible | current | A list of statis information for each port. |
| 1.3.6.1.4.1.171.11.118.9.2.3.12.1.1 | ColumnswL2PortStatisPortIndex | read-only | current | This object indicates the module's port number.(1..Max port number in the module) |
| 1.3.6.1.4.1.171.11.118.9.2.3.12.1.2 | ColumnswL2PortStatisPkts1519to1522Octets | read-only | current | Receive and Transmit 1519 to 1522 Byte Good VLAN Frame Counter incremented for each good VLAN(excludes FCS errors) frame received, which is 1519 to 1522 bytes … |
| 1.3.6.1.4.1.171.11.118.9.2.3.12.1.3 | ColumnswL2PortStatisPkts1519to2047Octets | read-only | current | Receive and Transmit 1519 to 2047 Byte Frame Counter. Incremented for each good or bad frame (includes FCS, Symbol, and Length/Type error). |
| 1.3.6.1.4.1.171.11.118.9.2.3.12.1.4 | ColumnswL2PortStatisPkts2048to4095Octets | read-only | current | Receive and Transmit 2048 to 4095 Byte Frame Counter. Incremented for each good or bad frame (includes FCS, Symbol, and Length/Type error). |
| 1.3.6.1.4.1.171.11.118.9.2.3.12.1.5 | ColumnswL2PortStatisPkts4096to9216Octets | read-only | current | Receive and Transmit 4096 to 9216 Byte Frame Counter. Incremented for each good or bad frame (includes FCS, Symbol, and Length/Type error). |
| 1.3.6.1.4.1.171.11.118.9.2.3.13 | TableswL2PortTXDropCounterTable | not-accessible | current | A table that contains information for each port TX drop counter. |
| 1.3.6.1.4.1.171.11.118.9.2.3.13.1 | RowswL2PortTXDropCounterEntry | not-accessible | current | A list of information for each port TX drop counter |
| 1.3.6.1.4.1.171.11.118.9.2.3.13.1.1 | ColumnswL2PortTXDropCounterPortIndex | read-only | current | This object indicates the module's port number.(1..Max port number in the module) |
| 1.3.6.1.4.1.171.11.118.9.2.3.13.1.2 | ColumnswL2PortTXHOLDrops | read-only | current | Incremented for each Packet drop due to Head Of Line blocking |
| 1.3.6.1.4.1.171.11.118.9.2.3.13.1.3 | ColumnswL2PortTXCOS0Drops | read-only | current | Incremented for each packet drop due to Head of Line blocking of egress port COS0 |
| 1.3.6.1.4.1.171.11.118.9.2.3.13.1.4 | ColumnswL2PortTXCOS1Drops | read-only | current | Incremented for each packet drop due to Head of Line blocking of egress port COS1 |
| 1.3.6.1.4.1.171.11.118.9.2.3.13.1.5 | ColumnswL2PortTXCOS2Drops | read-only | current | Incremented for each packet drop due to Head of Line blocking of egress port COS2 |
| 1.3.6.1.4.1.171.11.118.9.2.3.13.1.6 | ColumnswL2PortTXCOS3Drops | read-only | current | Incremented for each packet drop due to Head of Line blocking of egress port COS3 |
| 1.3.6.1.4.1.171.11.118.9.2.3.13.1.7 | ColumnswL2PortTXCOS4Drops | read-only | current | Incremented for each packet drop due to Head of Line blocking of egress port COS4 |
| 1.3.6.1.4.1.171.11.118.9.2.3.13.1.8 | ColumnswL2PortTXCOS5Drops | read-only | current | Incremented for each packet drop due to Head of Line blocking of egress port COS5 |
| 1.3.6.1.4.1.171.11.118.9.2.3.13.1.9 | ColumnswL2PortTXCOS6Drops | read-only | current | Incremented for each packet drop due to Head of Line blocking of egress port COS6 |
| 1.3.6.1.4.1.171.11.118.9.2.3.13.1.10 | ColumnswL2PortTXCOS7Drops | read-only | current | Incremented for each packet drop due to Head of Line blocking of egress port COS7 |
| 1.3.6.1.4.1.171.11.118.9.2.3.13.1.11 | ColumnswL2PortTXSTPDrops | read-only | current | Incremented for packets dropped when egress port is not in forwarding state |
| 1.3.6.1.4.1.171.11.118.9.2.9 | NodeswL2TrunkMgmt | |||
| 1.3.6.1.4.1.171.11.118.9.2.9.1 | ScalarswL2TrunkMaxSupportedEntries | read-only | current | Maximum number of entries in the trunk configuration table (swL2TrunkCtrlTable). |
| 1.3.6.1.4.1.171.11.118.9.2.9.2 | ScalarswL2TrunkCurrentNumEntries | read-only | current | Current active number of entries in the trunk configuration table. |
| 1.3.6.1.4.1.171.11.118.9.2.9.3 | TableswL2TrunkCtrlTable | not-accessible | current | This table specifies information about the logical port trunk groups. |
| 1.3.6.1.4.1.171.11.118.9.2.9.3.1 | RowswL2TrunkCtrlEntry | not-accessible | current | A list of information about each logical port trunk group. |
| 1.3.6.1.4.1.171.11.118.9.2.9.3.1.1 | ColumnswL2TrunkIndex | read-only | current | The index number of the logical port trunk group. The trunk group number depends on the existence of unit and module. |
| 1.3.6.1.4.1.171.11.118.9.2.9.3.1.3 | ColumnswL2TrunkMasterPort | read-create | current | This object indicates the master port number of the port trunk entry. When using Port Trunking, you cannot configure the other ports of the group except the ma… |
| 1.3.6.1.4.1.171.11.118.9.2.9.3.1.4 | ColumnswL2TrunkMember | read-create | current | Indicates the number of ports included in this Trunk group. The trunk port number depends on the existence of the module. The maximum number of ports is 8 for … |
| 1.3.6.1.4.1.171.11.118.9.2.9.3.1.5 | ColumnswL2TrunkFloodingPort | read-only | current | The object indicates the flooding port number of the port trunk entry. The first port of the Trunk group is implicitly configured to be the flooding port. |
| 1.3.6.1.4.1.171.11.118.9.2.9.3.1.6 | ColumnswL2TrunkType | read-create | current | This object indicates the type of trunk group. static: is a static trunk group lacp: is a LACP trunk group. |
| 1.3.6.1.4.1.171.11.118.9.2.9.3.1.7 | ColumnswL2TrunkState | read-create | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.171.11.118.9.2.9.4 | ScalarswL2TrunkAlgorithm | read-write | current | This object configures part of the packet examined by the switch when selecting the egress port for transmitting load-sharing data. |
| 1.3.6.1.4.1.171.11.118.9.2.9.5 | TableswL2TrunkLACPPortTable | not-accessible | current | This table specifies which ports are grouped together (this can be up to 8 ports) into a single logical link. |
| 1.3.6.1.4.1.171.11.118.9.2.9.5.1 | RowswL2TrunkLACPPortEntry | not-accessible | current | A list of information specifying which ports are grouped together (this can be up to 8 ports) into a single logical link. |
| 1.3.6.1.4.1.171.11.118.9.2.9.5.1.1 | ColumnswL2TrunkLACPPortIndex | read-only | current | The index of logical port LACP. |
| 1.3.6.1.4.1.171.11.118.9.2.9.5.1.2 | ColumnswL2TrunkLACPPortState | read-write | current | The state of a logical port LACP. |
| 1.3.6.1.4.1.171.11.118.9.2.9.6 | TableswL2TrunkVLANTable | not-accessible | current | This table is used to manage the VLAN trunking feature of the device. |
| 1.3.6.1.4.1.171.11.118.9.2.9.6.1 | RowswL2TrunkVLANEntry | not-accessible | current | This object is used to configure the VLAN trunking settings for each port. |
| 1.3.6.1.4.1.171.11.118.9.2.9.6.1.1 | ColumnswL2TrunkVLANPort | read-only | current | This object indicates the port being configured. |
| 1.3.6.1.4.1.171.11.118.9.2.9.6.1.2 | ColumnswL2TrunkVLANState | read-write | current | The state of the logical port VLAN trunk. |
| 1.3.6.1.4.1.171.11.118.9.2.10 | NodeswL2MirrorMgmt | |||
| 1.3.6.1.4.1.171.11.118.9.2.10.1 | ScalarswL2MirrorLogicTargetPort | read-write | current | This object indicates which switch port will sniff another port. A trunk port member cannot be configured as a target snooping port. The port number is the seq… |
| 1.3.6.1.4.1.171.11.118.9.2.10.2 | ScalarswL2MirrorPortSourceIngress | read-write | current | This represents the port where ingress packets will be sniffed. |
| 1.3.6.1.4.1.171.11.118.9.2.10.3 | ScalarswL2MirrorPortSourceEgress | read-write | current | This represents the port where egress packets will be sniffed. |
| 1.3.6.1.4.1.171.11.118.9.2.10.4 | ScalarswL2MirrorPortState | read-write | current | This object indicates the port mirroring state. other (1) - this entry is currently in use but the conditions under which it will remain so are different from … |
| 1.3.6.1.4.1.171.11.118.9.2.10.5 | TableswL2MirrorGroupTable | not-accessible | current | This table specifies information about the Mirror group configuration. |
| 1.3.6.1.4.1.171.11.118.9.2.10.5.1 | RowswL2MirrorGroupEntry | not-accessible | current | A list of information about each Mirror group configuration. |
| 1.3.6.1.4.1.171.11.118.9.2.10.5.1.1 | ColumnswL2MirrorGroupID | not-accessible | current | This object indicates the mirror group. The range of this object is (1..n), the value of n depends on detail project. |
| 1.3.6.1.4.1.171.11.118.9.2.10.5.1.2 | ColumnswL2MirrorGroupRowStatus | read-create | current | This object manages this mirror group entry. |
| 1.3.6.1.4.1.171.11.118.9.2.10.5.1.3 | ColumnswL2MirrorGroupState | read-create | current | This object indicates the mirror group state. |
| 1.3.6.1.4.1.171.11.118.9.2.10.5.1.4 | ColumnswL2MirrorGroupLogicTargetPort | read-create | current | This object indicates the mirror group target port. |
| 1.3.6.1.4.1.171.11.118.9.2.10.5.1.5 | ColumnswL2MirrorGroupPortSourceIngress | read-create | current | This object indicates the mirror group ingress source ports. |
| 1.3.6.1.4.1.171.11.118.9.2.10.5.1.6 | ColumnswL2MirrorGroupPortSourceEngress | read-create | current | This object indicates the mirror group engress source ports. |
| 1.3.6.1.4.1.171.11.118.9.2.11 | NodeswL2IGMPMgmt | |||
| 1.3.6.1.4.1.171.11.118.9.2.11.13 | TableswL2IGMPAccessAuthTable | not-accessible | current | This table is used to manage the IGMP Access Authentication configurations of the device. |
| 1.3.6.1.4.1.171.11.118.9.2.11.13.1 | RowswL2IGMPAccessAuthEntry | not-accessible | current | A list of manageable entities for IGMP Access Authentication. The configuration is done per port. |
| 1.3.6.1.4.1.171.11.118.9.2.11.13.1.1 | ColumnswL2IGMPAccessAuthPort | read-only | current | The index of the swL2IGMPAccessAuthTable. This object corresponds to the port being configured. |
| 1.3.6.1.4.1.171.11.118.9.2.11.13.1.2 | ColumnswL2IGMPAccessAuthState | read-write | current | This object denotes the status of IGMP Access Authentication of the port. Note: enabled(1): Both the authentication and accounting functions are enabled, after… |
| 1.3.6.1.4.1.171.11.118.9.2.14 | NodeswL2TrafficSegMgmt | |||
| 1.3.6.1.4.1.171.11.118.9.2.14.1 | TableswL2TrafficSegTable | not-accessible | current | This table specifies that the port can just forward traffic to the specific port list. |
| 1.3.6.1.4.1.171.11.118.9.2.14.1.1 | RowswL2TrafficSegEntry | not-accessible | current | A list of information which specifies the port with its traffic forwarding list. |
| 1.3.6.1.4.1.171.11.118.9.2.14.1.1.1 | ColumnswL2TrafficSegPort | read-only | current | The port number of the logical port. |
| 1.3.6.1.4.1.171.11.118.9.2.14.1.1.2 | ColumnswL2TrafficSegForwardPorts | read-write | current | The port list where a specific port can forward traffic. |
| 1.3.6.1.4.1.171.11.118.9.2.17 | NodeswL2MulticastFilterMode | |||
| 1.3.6.1.4.1.171.11.118.9.2.17.1 | TableswL2MulticastFilterModeVlanTable | not-accessible | current | A table that contains information about the VLAN multicast filter mode. |
| 1.3.6.1.4.1.171.11.118.9.2.17.1.1 | RowswL2MulticastFilterModeVlanEntry | not-accessible | current | A list of multicast filter mode information for each VLAN. |
| 1.3.6.1.4.1.171.11.118.9.2.17.1.1.1 | ColumnswL2MulticastFilterVid | read-only | current | Indicates the VID for each VLAN. |
| 1.3.6.1.4.1.171.11.118.9.2.17.1.1.2 | ColumnswL2MulticastFilterVlanMode | read-write | current | Specifies the multicast filter mode for each VLAN. |
| 1.3.6.1.4.1.171.11.118.9.2.100 | NodeswL2MgmtMIBTraps | |||
| 1.3.6.1.4.1.171.11.118.9.2.100.1 | NodeswL2Notify | |||
| 1.3.6.1.4.1.171.11.118.9.2.100.1.1 | NodeswL2NotifyMgmt | |||
| 1.3.6.1.4.1.171.11.118.9.2.100.1.1.1 | ScalarswL2macNotificationSeverity | read-write | current | Indicates the level of macNotification detection. |
| 1.3.6.1.4.1.171.11.118.9.2.100.1.1.2 | ScalarswL2PortSecurityViolationSeverity | read-write | current | Indicates the level of PortSecurityViolation detection. |
| 1.3.6.1.4.1.171.11.118.9.2.100.1.2 | NodeswL2NotifyPrefix | |||
| 1.3.6.1.4.1.171.11.118.9.2.100.1.2.0 | NodeswL2NotifFirmware | |||
| 1.3.6.1.4.1.171.11.118.9.2.100.1.2.0.1 | NotificationswL2macNotification | current | This trap indicates the MAC address variations in the address table . | |
| 1.3.6.1.4.1.171.11.118.9.2.100.1.2.0.2 | NotificationswL2PortSecurityViolationTrap | current | When the port_security trap is enabled, new MAC addresses that violate the pre-defined port security configuration will trigger trap messages to be sent out. | |
| 1.3.6.1.4.1.171.11.118.9.2.100.1.2.1 | Nodeswl2NotificationBidings | |||
| 1.3.6.1.4.1.171.11.118.9.2.100.1.2.1.1 | ScalarswL2macNotifyInfo | read-only | current | This object indicates information about the last time the system rebooted. |
| 1.3.6.1.4.1.171.11.118.9.2.100.1.2.1.2 | ScalarswL2PortSecurityViolationMac | accessible-for-notify | current | This object indicates the MAC address that violated the port security configuration. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| IANAifMauAutoNegCapBits | BITS{ bOther(0), b10baseT(1), b10baseTFD(2), b100baseT4(3), b100baseTX(4), b100baseTXFD(5), b100baseT2(6), b100baseT2FD(7), bFdxPause(8), bFdxAPause(9), bFdxSPause(10), bFdxBPause(11), b1000baseX(12), b1000baseXFD(13), b1000baseT(14), b1000baseTFD(15) } | current | This data type is used as the syntax of the swL2PortAutoNegCapabilityBits, swL2PortAutoNegCapAdvertisedBits, and swL2PortAutoNegCapReceivedBits objects in swL2PortAutoNegTable. |