DGS3000-28SC-L2MGMT-MIB
254 objects
The Structure of Layer 2 Network Management Information.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.11.133.5.1.2 | IdentityswL2MgmtMIB | The Structure of Layer 2 Network Management Information. | ||
| 1.3.6.1.4.1.171.11.133.5.1.2.1 | NodeswL2DevMgmt | |||
| 1.3.6.1.4.1.171.11.133.5.1.2.1.1 | NodeswL2DevInfo | |||
| 1.3.6.1.4.1.171.11.133.5.1.2.1.1.1 | ScalarswDevInfoTotalNumOfPort | read-only | current | The number of ports within this switch. This value is the sum of the ports within this switch. |
| 1.3.6.1.4.1.171.11.133.5.1.2.1.1.2 | ScalarswDevInfoNumOfPortInUse | read-only | current | The number of ports in this switch connected to the segment or the end stations. |
| 1.3.6.1.4.1.171.11.133.5.1.2.1.1.3 | TableswDevModuleInfoTable | not-accessible | current | This table contains the module information. |
| 1.3.6.1.4.1.171.11.133.5.1.2.1.1.3.1 | RowswDevModuleInfoEntry | not-accessible | current | A list of management information for each unit in the system. |
| 1.3.6.1.4.1.171.11.133.5.1.2.1.1.3.1.1 | ColumnswDevModuleInfoUnitID | read-only | current | This object indicates the specific unit ID in the stacking/chassis table. |
| 1.3.6.1.4.1.171.11.133.5.1.2.1.1.3.1.3 | ColumnswDevModuleInfoModuleName | read-only | current | A text string containing the name of the module. |
| 1.3.6.1.4.1.171.11.133.5.1.2.1.1.3.1.4 | ColumnswDevModuleInfoReversion | read-only | current | A text string containing the version (name or number) of the module. |
| 1.3.6.1.4.1.171.11.133.5.1.2.1.1.3.1.5 | ColumnswDevModuleInfoSerial | read-only | current | A text string containing the serial number or serial name of the module. |
| 1.3.6.1.4.1.171.11.133.5.1.2.1.1.3.1.6 | ColumnswDevModuleInfoDescription | read-only | current | A text string containing a description of the module. |
| 1.3.6.1.4.1.171.11.133.5.1.2.1.2 | NodeswL2DevCtrl | |||
| 1.3.6.1.4.1.171.11.133.5.1.2.1.2.1 | ScalarswL2DevCtrlStpState | read-write | current | This object can enable or disable the spanning tree algorithm during the runtime of the system. |
| 1.3.6.1.4.1.171.11.133.5.1.2.1.2.2 | ScalarswL2DevCtrlIGMPSnooping | read-write | current | This object indicates if the layer 2 Internet Group Management Protocol (IGMP) capture function is enabled or disabled. |
| 1.3.6.1.4.1.171.11.133.5.1.2.1.2.3 | ScalarswL2DevCtrlIGMPSnoopingMcstRTOnly | read-write | current | This object controls the IGMP snooping forward multicast routing only state. |
| 1.3.6.1.4.1.171.11.133.5.1.2.1.2.4 | ScalarswL2DevCtrlRmonState | read-write | current | This object can enable or disable RMON. |
| 1.3.6.1.4.1.171.11.133.5.1.2.1.2.5 | ScalarswL2DevCtrlSnmpTrapState | read-write | current | This object controls the SNMP trap status. |
| 1.3.6.1.4.1.171.11.133.5.1.2.1.2.6 | ScalarswL2DevCtrlCleanAllStatisticCounter | read-write | current | When the object is set to active, all statistical counters will be cleared. If set to normal, no action will occur. |
| 1.3.6.1.4.1.171.11.133.5.1.2.1.2.7 | ScalarswL2DevCtrlVlanIdOfFDBTbl | read-write | current | Indicates the VLAN ID to which the Dot1dTpFdbTable belongs; The default value is the DEFAULT_VLAN_ID of the system. |
| 1.3.6.1.4.1.171.11.133.5.1.2.1.2.8 | ScalarswL2MACNotifyState | read-write | current | This object can enable or disable MAC Notification. |
| 1.3.6.1.4.1.171.11.133.5.1.2.1.2.9 | ScalarswL2MACNotifyHistorySize | read-write | current | This object indicates the history size of MAC addresses in the MAC Address table. The default value is 1. |
| 1.3.6.1.4.1.171.11.133.5.1.2.1.2.10 | ScalarswL2MACNotifyInterval | read-write | current | This object indicates the time interval, in seconds, that will trigger MAC notification messages. |
| 1.3.6.1.4.1.171.11.133.5.1.2.1.2.13 | ScalarswL2DevCtrlAsymVlanState | read-write | current | This object enables or disables asymmetric VLANs during the runtime of the system. |
| 1.3.6.1.4.1.171.11.133.5.1.2.1.2.14 | NodeswL2DevCtrlTelnet | |||
| 1.3.6.1.4.1.171.11.133.5.1.2.1.2.14.1 | ScalarswL2DevCtrlTelnetState | read-write | current | This object controls the Telnet status. |
| 1.3.6.1.4.1.171.11.133.5.1.2.1.2.14.2 | ScalarswL2DevCtrlTelnetTcpPort | read-write | current | This object designates TCP ports. When Telnet is disabled, this object is not accessible. |
| 1.3.6.1.4.1.171.11.133.5.1.2.1.2.16 | ScalarswL2DevCtrlManagementVlanId | read-write | current | This object controls which previously created VLANs are included in the System IP Interface. |
| 1.3.6.1.4.1.171.11.133.5.1.2.1.2.17 | NodeswL2DevCtrlWeb | |||
| 1.3.6.1.4.1.171.11.133.5.1.2.1.2.17.1 | ScalarswL2DevCtrlWebState | read-write | current | This object controls the Web status. |
| 1.3.6.1.4.1.171.11.133.5.1.2.1.2.17.2 | ScalarswL2DevCtrlWebTcpPort | read-write | current | This object designates TCP ports. When Web is disabled, this object is not accessible. |
| 1.3.6.1.4.1.171.11.133.5.1.2.1.2.18 | ScalarswL2DevCtrlLLDPState | read-write | current | Specifies the state of the LLDP function. When this function is enabled, the switch can start to transmit LLDP packets and receive and process the LLDP packets… |
| 1.3.6.1.4.1.171.11.133.5.1.2.1.2.19 | ScalarswL2DevCtrlLLDPForwardMessageState | read-write | current | When lldp is disabled and lldp forward_message's are enabled, the LLDP Data Unit packets received by the switch will be forwarded. |
| 1.3.6.1.4.1.171.11.133.5.1.2.1.2.20 | ScalarswL2DevCtrlIpAutoconfig | read-write | current | This object controls the IP auto configuration state. |
| 1.3.6.1.4.1.171.11.133.5.1.2.1.2.21 | NodeswL2DevCtrlCFM | |||
| 1.3.6.1.4.1.171.11.133.5.1.2.1.2.21.1 | ScalarswL2DevCtrlCFMState | read-write | current | This object indicates the CFM global state. |
| 1.3.6.1.4.1.171.11.133.5.1.2.1.2.21.2 | TableswL2DevCtrlCFMPortTable | not-accessible | current | A table containing the CFM state of specified ports. |
| 1.3.6.1.4.1.171.11.133.5.1.2.1.2.21.2.1 | RowswL2DevCtrlCFMPortEntry | not-accessible | current | The entry of the CFM state on specified ports. |
| 1.3.6.1.4.1.171.11.133.5.1.2.1.2.21.2.1.1 | ColumnswL2DevCtrlCFMPortIndex | not-accessible | current | This object indicates the port number. |
| 1.3.6.1.4.1.171.11.133.5.1.2.1.2.21.2.1.2 | ColumnswL2DevCtrlCFMPortState | read-write | current | This object indicates the CFM state by port. |
| 1.3.6.1.4.1.171.11.133.5.1.2.1.2.21.3 | TableswL2DevCtrlCFMMaTable | not-accessible | current | A table containing the CFM mode of specified MAs. |
| 1.3.6.1.4.1.171.11.133.5.1.2.1.2.21.3.1 | RowswL2DevCtrlCFMMaEntry | not-accessible | current | The entry of the CFM mode on specified MAs. |
| 1.3.6.1.4.1.171.11.133.5.1.2.1.2.21.3.1.1 | ColumnswL2DevCtrlCFMMaMode | read-write | current | This object indicates the CFM mode by MA. |
| 1.3.6.1.4.1.171.11.133.5.1.2.1.2.21.4 | TableswL2DevCtrlCFMMepTable | not-accessible | current | A table containing the CFM mode of specified MEPs. |
| 1.3.6.1.4.1.171.11.133.5.1.2.1.2.21.4.1 | RowswL2DevCtrlCFMMepEntry | not-accessible | current | The entry of the CFM mode on specified MEPs. |
| 1.3.6.1.4.1.171.11.133.5.1.2.1.2.21.4.1.1 | ColumnswL2DevCtrlCFMMepMode | read-only | current | This object indicates the CFM mode by MEP. |
| 1.3.6.1.4.1.171.11.133.5.1.2.1.2.22 | ScalarswL2DevCtrlVLANTrunkState | read-write | current | This indicates the global state of the VLAN trunking feature of the device. |
| 1.3.6.1.4.1.171.11.133.5.1.2.1.2.23 | ScalarswL2DevCtrlIpAutoconfigTimeout | read-write | current | This object indicates the timeout for the auto configuration. |
| 1.3.6.1.4.1.171.11.133.5.1.2.1.3 | NodeswL2DevAlarm | |||
| 1.3.6.1.4.1.171.11.133.5.1.2.1.3.1 | ScalarswL2DevAlarmNewRoot | read-write | current | When the device has become the new root of the Spanning Tree, this object decides whether to send a new root trap. |
| 1.3.6.1.4.1.171.11.133.5.1.2.1.3.2 | ScalarswL2DevAlarmTopologyChange | read-write | current | This object determines whether or not to send a trap message when the switch topology changes. If the object is enabled (3), the Topology Change trap is sent b… |
| 1.3.6.1.4.1.171.11.133.5.1.2.1.3.3 | ScalarswL2DevAlarmLinkChange | read-write | current | This object determines whether or not to send a trap message when the link changes. If the object is enabled (3), the Link Change trap is sent by the device wh… |
| 1.3.6.1.4.1.171.11.133.5.1.2.2 | NodeswL2VLANMgmt | |||
| 1.3.6.1.4.1.171.11.133.5.1.2.2.1 | TableswL2VlanStaticTable | not-accessible | current | A table containing static configuration information for each VLAN configured into the device by (local or network) management. All entries are permanent and wi… |
| 1.3.6.1.4.1.171.11.133.5.1.2.2.1.1 | RowswL2VlanStaticEntry | not-accessible | current | Static information for a VLAN configured into this device by (local or network) management. |
| 1.3.6.1.4.1.171.11.133.5.1.2.2.1.1.1 | ColumnswL2VlanIndex | not-accessible | current | The VLAN-ID or other identifier referring to this VLAN. |
| 1.3.6.1.4.1.171.11.133.5.1.2.2.1.1.2 | ColumnswL2VLANAdvertisement | read-write | current | This object indicates if the advertisement is active or not. |
| 1.3.6.1.4.1.171.11.133.5.1.2.2.2 | ScalarswL2PVIDAutoAssignmentState | read-write | current | This object controls the PVID auto assignment state. If 'Auto-assign PVID' is disabled, the PVID can only be changed by PVID configuration (user changes explic… |
| 1.3.6.1.4.1.171.11.133.5.1.2.2.3 | TableswL2VlanPortInfoTable | not-accessible | current | A table containing the VLAN and port role information of each port. |
| 1.3.6.1.4.1.171.11.133.5.1.2.2.3.1 | RowswL2VlanPortInfoEntry | not-accessible | current | The table entry of VLAN port information. |
| 1.3.6.1.4.1.171.11.133.5.1.2.2.3.1.1 | ColumnswL2VlanPortInfoPortIndex | read-only | current | The port index. |
| 1.3.6.1.4.1.171.11.133.5.1.2.2.3.1.2 | ColumnswL2VlanPortInfoVid | read-only | current | The VLAN ID assigned to a special port |
| 1.3.6.1.4.1.171.11.133.5.1.2.2.3.1.3 | ColumnswL2VlanPortInfoPortRole | read-only | current | The port role of a special port. When the role is 'other', it means this port does not belong to the VLAN. |
| 1.3.6.1.4.1.171.11.133.5.1.2.2.4 | TableswL2SubnetVLANTable | not-accessible | current | A table containing the subnet VLAN information. |
| 1.3.6.1.4.1.171.11.133.5.1.2.2.4.1 | RowswL2SubnetVLANEntry | not-accessible | current | The entry of subnet VLAN information. |
| 1.3.6.1.4.1.171.11.133.5.1.2.2.4.1.1 | ColumnswL2SubnetVLANIPAddress | read-only | current | This object indicates the IP address. |
| 1.3.6.1.4.1.171.11.133.5.1.2.2.4.1.2 | ColumnswL2SubnetVLANIPMask | read-only | current | This object indicates the IP mask. |
| 1.3.6.1.4.1.171.11.133.5.1.2.2.4.1.3 | ColumnswL2SubnetVLANID | read-create | current | This object indicates the VLAN ID. |
| 1.3.6.1.4.1.171.11.133.5.1.2.2.4.1.4 | ColumnswL2SubnetVLANPriority | read-create | current | This object indicates the priority. |
| 1.3.6.1.4.1.171.11.133.5.1.2.2.4.1.5 | ColumnswL2SubnetVLANRowStatus | read-create | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.171.11.133.5.1.2.2.5 | TableswL2VlanPrecedenceTable | not-accessible | current | A table containing the VLAN classification precedence information of each port. |
| 1.3.6.1.4.1.171.11.133.5.1.2.2.5.1 | RowswL2VlanPrecedenceEntry | not-accessible | current | The entry of VLAN classification precedence information. |
| 1.3.6.1.4.1.171.11.133.5.1.2.2.5.1.1 | ColumnswL2VlanPrecedencePortIndex | read-only | current | This object indicates the port index. |
| 1.3.6.1.4.1.171.11.133.5.1.2.2.5.1.2 | ColumnswL2VlanPrecedenceClassification | read-write | current | This object indicates the VLAN classification precedence. |
| 1.3.6.1.4.1.171.11.133.5.1.2.2.6 | ScalarswL2NniGvrpBpduAddress | read-write | current | Specifies the GVRP's BPDU MAC address of the NNI port with Q-in-Q status. |
| 1.3.6.1.4.1.171.11.133.5.1.2.3 | NodeswL2PortMgmt | |||
| 1.3.6.1.4.1.171.11.133.5.1.2.3.1 | TableswL2PortInfoTable | not-accessible | current | A table that contains information about every port. |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.1.1 | RowswL2PortInfoEntry | not-accessible | current | A list of information for each port of the device. |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.1.1.1 | ColumnswL2PortInfoPortIndex | read-only | current | This object indicates the module's port number.(1..Max port number in the module) |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.1.1.2 | ColumnswL2PortInfoMediumType | read-only | current | Indicates the medium type of the port number. |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.1.1.3 | ColumnswL2PortInfoUnitID | read-only | current | Indicates the ID of the unit in the system. |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.1.1.4 | ColumnswL2PortInfoType | read-only | current | This object indicates the connector type of this port. |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.1.1.5 | ColumnswL2PortInfoLinkStatus | read-only | current | This object indicates the port link status. |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.1.1.6 | ColumnswL2PortInfoNwayStatus | read-only | current | This object indicates the port speed and duplex mode. |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.1.1.7 | ColumnswL2PortInfoModuleType | read-only | current | This object indicates the module type of this port. |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.1.1.8 | ColumnswL2PortInfoErrorDisabled | read-only | current | This object indicates the blocking type of this port. |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.2 | TableswL2PortCtrlTable | not-accessible | current | A table that contains control information about every port. |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.2.1 | RowswL2PortCtrlEntry | not-accessible | current | A list of control information for each port on the device. |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.2.1.1 | ColumnswL2PortCtrlPortIndex | read-only | current | This object indicates the module's port number.(1..Max port number in the module) |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.2.1.2 | ColumnswL2PortCtrlMediumType | read-only | current | Indicates the medium type of the port number. |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.2.1.3 | ColumnswL2PortCtrlUnitIndex | read-only | current | Indicates the ID of the unit in the device |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.2.1.4 | ColumnswL2PortCtrlAdminState | read-write | current | This object decides if the port is enabled or disabled. |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.2.1.5 | ColumnswL2PortCtrlNwayState | read-write | current | Chose the port speed, duplex mode, and N-Way function mode. |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.2.1.6 | ColumnswL2PortCtrlFlowCtrlState | read-write | current | The flow control mechanism is different between full duplex mode and half duplex mode. For half duplex mode, the jamming signal is asserted. For full duplex mo… |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.2.1.7 | ColumnswL2PortCtrlLearningState | read-write | current | This object decides if the port is locked or not. |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.2.1.8 | ColumnswL2PortCtrlMACNotifyState | read-write | current | This object sets each port's MAC notification state. |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.2.1.10 | ColumnswL2PortCtrlMDIXState | read-write | current | This object configures the MDIX setting of the port. |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.2.1.11 | ColumnswL2PortCtrlAutoNegRestart | read-write | current | If the value of this object is set to restart(1) then this will force auto-negotiation to begin link renegotiation. If auto-negotiation signaling is disabled, … |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.2.1.12 | ColumnswL2PortCtrlAutoNegCapAdvertisedBits | read-write | current | A value that uniquely identifies the set of capabilities advertised by the local auto-negotiation entity. Capabilities in this object that are not available in… |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.3 | ScalarswL2PortCtrlJumboFrame | read-write | current | This object configures the switch's jumbo frame settings. |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.4 | ScalarswL2PortCtrlJumboFrameMaxSize | read-only | current | This object describes how many bytes the max jumbo frame is. |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.5 | TableswL2PortCableDiagnosisTable | not-accessible | current | A table that contains cable diagnostic information about every port. |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.5.1 | RowswL2PortCableDiagnosisEntry | not-accessible | current | A list with cable diagnostic information for each port of the device. |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.5.1.1 | ColumnswL2PortCableDiagnosisPortIndex | read-only | current | This object indicates the module's port number.(1..Max port number in the module) |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.5.1.2 | ColumnswL2PortCableDiagnosisPairIndex | read-only | current | Indicates the pair index of each port. Pair 1 means pin 3 and 6 of the connector. Pair 2 means pin 1 and 2 of the connector. Pair 3 means pin 7 and 8 of the co… |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.5.1.3 | ColumnswL2PortCableDiagnosisCableStatus | read-only | current | This object indicates the cable status. |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.5.1.4 | ColumnswL2PortCableDiagnosisPairStatus | read-only | current | This object indicates the status of the pair. |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.5.1.5 | ColumnswL2PortCableDiagnosisPairLength | read-only | current | This object indicates the approx. length or length to failure of the pair. The unit value is in meters. |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.5.1.6 | ColumnswL2PortCableDiagnosisPairLengthInaccuracy | read-only | current | This object indicates the inaccuracy of a pair length. The unit value is in meters. |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.6 | TableswL2PortCounterCtrlTable | not-accessible | current | A table that is used to clear counter information about every port. |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.6.1 | RowswL2PortCounterCtrlEntry | not-accessible | current | A list of entries used to clear the counter information for each port of the device. |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.6.1.1 | ColumnswL2PortCounterCtrlPortIndex | read-only | current | This object indicates the module's port number.(1..Max port number in the module) |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.6.1.2 | ColumnswL2PortCounterClearCtrl | read-write | current | This object indicates whether to clear the counters for each port of the device or not. |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.7 | TableswL2PortErrTable | not-accessible | current | A table that contains error information for each port. |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.7.1 | RowswL2PortErrEntry | not-accessible | current | A list of information regarding port errors on the device. |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.7.1.1 | ColumnswL2PortErrPortIndex | read-only | current | This object indicates the module's port number.(1..Max port number in the module). |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.7.1.2 | ColumnswL2PortErrPortState | read-only | current | This object indicates if the port state is enabled or disabled. |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.7.1.3 | ColumnswL2PortErrPortConnStatus | read-only | current | This object indicates whether the Port Status is err-disabled or not. |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.7.1.4 | ColumnswL2PortErrPortReason | read-only | current | This object describes the reason for the port error. |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.8 | TableswL2PortAutoNegInfoTable | not-accessible | current | A table that contains information about every port's auto negotiation status. |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.8.1 | RowswL2PortAutoNegInfoEntry | not-accessible | current | A list of information for each port auto negotiation of the device. |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.8.1.1 | ColumnswL2PortAutoNegInfoPortIndex | read-only | current | This object indicates the module's port number.(1..Max port number in the module) |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.8.1.2 | ColumnswL2PortAutoNegInfoAdminStatus | read-only | current | If the value of this object is disabled(2) then the interface will act as it would if it had no auto-negotiation signaling. The status is affect by setting swL… |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.8.1.3 | ColumnswL2PortAutoNegInfoCapabilityBits | read-only | current | A value that uniquely identifies the set of capabilities of the local auto-negotiation entity. Note that interfaces that support this MIB may have capabilities… |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.8.1.4 | ColumnswL2PortAutoNegInfoCapAdvertisedBits | read-only | current | A value that uniquely identifies the set of capabilities advertised by the local auto-negotiation entity. Capabilities in this object that are not available in… |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.8.1.5 | ColumnswL2PortAutoNegInfoCapReceivedBits | read-only | current | A value that uniquely identifies the set of capabilities received from the remote auto-negotiation entity. Note that interfaces that support this MIB may be at… |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.9 | TableswL2PortDropCounterTable | not-accessible | current | A table that contains received error statistic information for each port. |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.9.1 | RowswL2PortDropCounterEntry | not-accessible | current | A list of information for each port received drop counter. |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.9.1.1 | ColumnswL2PortDropCounterPortIndex | read-only | current | This object indicates the module's port number.(1..Max port number in the module) |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.9.1.2 | ColumnswL2PortBufferFullDrops | read-only | current | The total number of packets discarded while input buffer full. |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.9.1.3 | ColumnswL2PortACLDrops | read-only | current | The total number of received packets denied by ACLs. |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.9.1.4 | ColumnswL2PortMulticastDrops | read-only | current | The total number of received multicast packet that is discarded. |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.9.1.5 | ColumnswL2PortVLANIngressDrops | read-only | current | The total number of packets discarded by VLAN ingress checking. |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.9.1.6 | ColumnswL2PortIngressBandwidthControlDrops | read-only | current | The total number of packets discarded by port ingress bandwidth control. |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.9.1.7 | ColumnswL2PortInvalidIPv6Drops | read-only | current | The total number of packets discarded by IPv6 L3 |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.9.1.8 | ColumnswL2PortSTPDrops | read-only | current | The total number of packets discarded when ingress port is not in forwarding state. |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.9.1.9 | ColumnswL2PortStormAndFDBDiscard | read-only | current | The total number of packets discarded by receiving policy (i.e. DST_DISCARD, SRC_DISCARD,RATE_CONTROL, etc.) |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.9.1.10 | ColumnswL2PortMTUDrops | read-only | current | The total number of packets discarded by frames received, which exceeds Maximum Frame in length and contains a valid or invalid FCS. |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.9.1.11 | ColumnswL2PortInvalidDestinationPort | read-only | current | The total number of packets dropped due to port bitmap of zero condition. |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.10 | TableswL2PortJumboFrameCtrlTable | not-accessible | current | A table that contains information for each port's jumbo frame information. |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.10.1 | RowswL2PortJumboFrameCtrlEntry | not-accessible | current | A list of information for each port's jumbo frame of the device. |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.10.1.1 | ColumnswL2PortJumboFrameCtrlPortIndex | not-accessible | current | This object indicates the module's port number. |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.10.1.2 | ColumnswL2PortJumboFrameCtrlState | read-write | current | This object indicates the jumbo frame state on a specified port. |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.11 | TableswL2PortSfpInfoTable | not-accessible | current | A table that contains information for each sfp pluged in port. |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.11.1 | RowswL2PortSfpInfoEntry | not-accessible | current | A list of information for each sfp pluged in port. |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.11.1.1 | ColumnswL2PortSfpInfoPortIndex | read-only | current | This object indicates the module's port number.(1..Max port number in the module) |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.11.1.2 | ColumnswL2PortSfpInfoConnectType | read-only | current | The ConnectType of sfp informaiton. |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.11.1.3 | ColumnswL2PortSfpInfoVendorName | read-only | current | The vendor name of sfp informaiton. |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.11.1.4 | ColumnswL2PortSfpInfoVendorPN | read-only | current | The vendor PN of sfp informaiton. |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.11.1.5 | ColumnswL2PortSfpInfoVendorSN | read-only | current | The vendor SN of sfp informaiton. |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.11.1.6 | ColumnswL2PortSfpInfoVendorOUI | read-only | current | The vendor OUI of sfp information. |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.11.1.7 | ColumnswL2PortSfpInfoVendorRev | read-only | current | The vendor Rev of sfp information. |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.11.1.8 | ColumnswL2PortSfpInfoDateCode | read-only | current | The date code of sfp information. |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.11.1.9 | ColumnswL2PortSfpInfoFiberType | read-only | current | The fiber type of sfp information. |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.11.1.10 | ColumnswL2PortSfpInfoBaudRate | read-only | current | The baud rate of sfp information. |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.11.1.11 | ColumnswL2PortSfpInfoWavelength | read-only | current | The wavelength of sfp information. |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.14 | TableswL2PortLinkTimeTable | not-accessible | current | A table of information for the link time of the port. |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.14.1 | RowswL2PortLinkTimeEntry | not-accessible | current | An entry in swL2PortLinkTimeTable contains the link time of the port. |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.14.1.1 | ColumnswL2PortLinkTimeIfIndex | read-only | current | This object indicates the module's port number.(1..Max port number in the module) |
| 1.3.6.1.4.1.171.11.133.5.1.2.3.14.1.2 | ColumnswL2PortLinkTimer | read-only | current | The link timer of the port after the port is link up When the value is 0 means the port is link down. |
| 1.3.6.1.4.1.171.11.133.5.1.2.9 | NodeswL2TrunkMgmt | |||
| 1.3.6.1.4.1.171.11.133.5.1.2.9.1 | ScalarswL2TrunkMaxSupportedEntries | read-only | current | Maximum number of entries in the trunk configuration table (swL2TrunkCtrlTable). |
| 1.3.6.1.4.1.171.11.133.5.1.2.9.2 | ScalarswL2TrunkCurrentNumEntries | read-only | current | Current active number of entries in the trunk configuration table. |
| 1.3.6.1.4.1.171.11.133.5.1.2.9.3 | TableswL2TrunkCtrlTable | not-accessible | current | This table specifies information about the logical port trunk groups. |
| 1.3.6.1.4.1.171.11.133.5.1.2.9.3.1 | RowswL2TrunkCtrlEntry | not-accessible | current | A list of information about each logical port trunk group. |
| 1.3.6.1.4.1.171.11.133.5.1.2.9.3.1.1 | ColumnswL2TrunkIndex | read-only | current | The index number of the logical port trunk group. The trunk group number depends on the existence of unit and module. |
| 1.3.6.1.4.1.171.11.133.5.1.2.9.3.1.2 | ColumnswL2TrunkName | read-create | current | The name of the logical port trunk group. |
| 1.3.6.1.4.1.171.11.133.5.1.2.9.3.1.3 | ColumnswL2TrunkMasterPort | read-create | current | This object indicates the master port number of the port trunk entry. When using Port Trunking, you cannot configure the other ports of the group except the ma… |
| 1.3.6.1.4.1.171.11.133.5.1.2.9.3.1.4 | ColumnswL2TrunkMember | read-create | current | Indicates the number of ports included in this Trunk group. The trunk port number depends on the existence of the module. The maximum number of ports is 8 for … |
| 1.3.6.1.4.1.171.11.133.5.1.2.9.3.1.5 | ColumnswL2TrunkFloodingPort | read-only | current | The object indicates the flooding port number of the port trunk entry. The first port of the Trunk group is implicitly configured to be the flooding port. |
| 1.3.6.1.4.1.171.11.133.5.1.2.9.3.1.6 | ColumnswL2TrunkType | read-create | current | This object indicates the type of trunk group. static: is a static trunk group lacp: is a LACP trunk group. |
| 1.3.6.1.4.1.171.11.133.5.1.2.9.3.1.7 | ColumnswL2TrunkState | read-create | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.171.11.133.5.1.2.9.4 | ScalarswL2TrunkAlgorithm | read-write | current | This object configures part of the packet examined by the switch when selecting the egress port for transmitting load-sharing data. |
| 1.3.6.1.4.1.171.11.133.5.1.2.9.5 | TableswL2TrunkLACPPortTable | not-accessible | current | This table specifies which ports are grouped together (this can be up to 8 ports) into a single logical link. |
| 1.3.6.1.4.1.171.11.133.5.1.2.9.5.1 | RowswL2TrunkLACPPortEntry | not-accessible | current | A list of information specifying which ports are grouped together (this can be up to 8 ports) into a single logical link. |
| 1.3.6.1.4.1.171.11.133.5.1.2.9.5.1.1 | ColumnswL2TrunkLACPPortIndex | read-only | current | The index of logical port LACP. |
| 1.3.6.1.4.1.171.11.133.5.1.2.9.5.1.2 | ColumnswL2TrunkLACPPortState | read-write | current | The state of a logical port LACP. |
| 1.3.6.1.4.1.171.11.133.5.1.2.9.6 | TableswL2TrunkVLANTable | not-accessible | current | This table is used to manage the VLAN trunking feature of the device. |
| 1.3.6.1.4.1.171.11.133.5.1.2.9.6.1 | RowswL2TrunkVLANEntry | not-accessible | current | This object is used to configure the VLAN trunking settings for each port. |
| 1.3.6.1.4.1.171.11.133.5.1.2.9.6.1.1 | ColumnswL2TrunkVLANPort | read-only | current | This object indicates the port being configured. |
| 1.3.6.1.4.1.171.11.133.5.1.2.9.6.1.2 | ColumnswL2TrunkVLANState | read-write | current | The state of the logical port LACP. |
| 1.3.6.1.4.1.171.11.133.5.1.2.10 | NodeswL2MirrorMgmt | |||
| 1.3.6.1.4.1.171.11.133.5.1.2.10.1 | ScalarswL2MirrorLogicTargetPort | read-write | current | This object indicates which switch port will sniff another port. The port number is the sequential (logical) number, which is also applied to the bridge MIB, e… |
| 1.3.6.1.4.1.171.11.133.5.1.2.10.2 | ScalarswL2MirrorPortSourceIngress | read-write | current | This represents the port where ingress packets will be sniffed. |
| 1.3.6.1.4.1.171.11.133.5.1.2.10.3 | ScalarswL2MirrorPortSourceEgress | read-write | current | This represents the port where egress packets will be sniffed. |
| 1.3.6.1.4.1.171.11.133.5.1.2.10.4 | ScalarswL2MirrorPortState | read-write | current | This object indicates the port mirroring state. other (1) - this entry is currently in use but the conditions under which it will remain so are different from … |
| 1.3.6.1.4.1.171.11.133.5.1.2.10.5 | TableswL2MirrorGroupTable | not-accessible | current | This table specifies information about the mirror group configuration. |
| 1.3.6.1.4.1.171.11.133.5.1.2.10.5.1 | RowswL2MirrorGroupEntry | not-accessible | current | A list of information about each mirror group configuration. |
| 1.3.6.1.4.1.171.11.133.5.1.2.10.5.1.1 | ColumnswL2MirrorGroupID | not-accessible | current | This object indicates the mirror group. The range of this object is (1..N), the value of N is project dependent. |
| 1.3.6.1.4.1.171.11.133.5.1.2.10.5.1.2 | ColumnswL2MirrorGroupRowStatus | read-create | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.171.11.133.5.1.2.10.5.1.3 | ColumnswL2MirrorGroupState | read-create | current | This object indicates the mirror group state. |
| 1.3.6.1.4.1.171.11.133.5.1.2.10.5.1.4 | ColumnswL2MirrorGroupTargetPort | read-create | current | This object indicates the mirror group target port. |
| 1.3.6.1.4.1.171.11.133.5.1.2.10.5.1.5 | ColumnswL2MirrorGroupSourceIngress | read-create | current | This object indicates the mirror group ingress source ports. |
| 1.3.6.1.4.1.171.11.133.5.1.2.10.5.1.6 | ColumnswL2MirrorGroupSourceEgress | read-create | current | This object indicates the mirror group egress source ports. |
| 1.3.6.1.4.1.171.11.133.5.1.2.11 | NodeswL2IGMPMgmt | |||
| 1.3.6.1.4.1.171.11.133.5.1.2.11.13 | TableswL2IGMPAccessAuthTable | not-accessible | current | This table is used to manage the IGMP Access Authentication configurations of the device. |
| 1.3.6.1.4.1.171.11.133.5.1.2.11.13.1 | RowswL2IGMPAccessAuthEntry | not-accessible | current | A list of manageable entities for IGMP Access Authentication. The configuration is done per port. |
| 1.3.6.1.4.1.171.11.133.5.1.2.11.13.1.1 | ColumnswL2IGMPAccessAuthPort | read-only | current | The index of the swL2IGMPAccessAuthTable. This object corresponds to the port being configured. |
| 1.3.6.1.4.1.171.11.133.5.1.2.11.13.1.2 | ColumnswL2IGMPAccessAuthState | read-write | current | This object denotes the status of IGMP Access Authentication of the port. Note: enabled(1): Both the authentication and accounting functions are enabled, after… |
| 1.3.6.1.4.1.171.11.133.5.1.2.13 | NodeswL2TrafficMgmt | |||
| 1.3.6.1.4.1.171.11.133.5.1.2.13.1 | TableswL2TrafficCtrlTable | not-accessible | current | This table specifies the storm traffic control configuration. |
| 1.3.6.1.4.1.171.11.133.5.1.2.13.1.1 | RowswL2TrafficCtrlEntry | not-accessible | current | A list of information specific to the storm traffic control configuration. |
| 1.3.6.1.4.1.171.11.133.5.1.2.13.1.1.1 | ColumnswL2TrafficCtrlGroupIndex | read-only | current | The index of the logical port trunk. The trunk group number depends on the existence of a unit and module. |
| 1.3.6.1.4.1.171.11.133.5.1.2.13.1.1.2 | ColumnswL2TrafficCtrlUnitIndex | read-only | current | Indicates the ID of the unit in the device |
| 1.3.6.1.4.1.171.11.133.5.1.2.13.1.1.3 | ColumnswL2TrafficCtrlBMStromthreshold | read-write | current | This object decides how many thousand broadcast/multicast packets per second (depending on swL2TrafficCtrlBcastStromCtrl, swL2TrafficCtrlMcastStromCtrl or swL2… |
| 1.3.6.1.4.1.171.11.133.5.1.2.13.1.1.4 | ColumnswL2TrafficCtrlBcastStromCtrl | read-write | current | This object indicates if the broadcast storm control function is enabled or disabled. |
| 1.3.6.1.4.1.171.11.133.5.1.2.13.1.1.5 | ColumnswL2TrafficCtrlMcastStromCtrl | read-write | current | This object indicates if the multicast storm control function is enabled or disabled. |
| 1.3.6.1.4.1.171.11.133.5.1.2.13.1.1.6 | ColumnswL2TrafficCtrlDlfStromCtrl | read-write | current | This object indicates if the destination lookup fail function is enabled or disabled. |
| 1.3.6.1.4.1.171.11.133.5.1.2.14 | NodeswL2TrafficSegMgmt | |||
| 1.3.6.1.4.1.171.11.133.5.1.2.14.1 | TableswL2TrafficSegTable | not-accessible | current | This table specifies that the port can just forward traffic to the specific port list. |
| 1.3.6.1.4.1.171.11.133.5.1.2.14.1.1 | RowswL2TrafficSegEntry | not-accessible | current | A list of information which specifies the port with its traffic forwarding list. |
| 1.3.6.1.4.1.171.11.133.5.1.2.14.1.1.1 | ColumnswL2TrafficSegPort | read-only | current | The port number of the logical port. |
| 1.3.6.1.4.1.171.11.133.5.1.2.14.1.1.2 | ColumnswL2TrafficSegForwardPorts | read-write | current | The port list where a specific port can forward traffic. |
| 1.3.6.1.4.1.171.11.133.5.1.2.17 | NodeswL2MulticastFilterMode | |||
| 1.3.6.1.4.1.171.11.133.5.1.2.17.1 | TableswL2MulticastFilterModeVlanTable | not-accessible | current | A table that contains information about the VLAN multicast filter mode. |
| 1.3.6.1.4.1.171.11.133.5.1.2.17.1.1 | RowswL2MulticastFilterModeVlanEntry | not-accessible | current | A list of multicast filter mode information for each VLAN. |
| 1.3.6.1.4.1.171.11.133.5.1.2.17.1.1.1 | ColumnswL2MulticastFilterVid | read-only | current | Indicates the VID for each VLAN. |
| 1.3.6.1.4.1.171.11.133.5.1.2.17.1.1.2 | ColumnswL2MulticastFilterVlanMode | read-write | current | Specifies the multicast filter mode for each VLAN. |
| 1.3.6.1.4.1.171.11.133.5.1.2.17.2 | TableswL2MulticastFilterModePortTable | not-accessible | current | A table that contains information about the port multicast filter mode. |
| 1.3.6.1.4.1.171.11.133.5.1.2.17.2.1 | RowswL2MulticastFilterModePortEntry | not-accessible | current | A list of multicast filter mode information for each port. |
| 1.3.6.1.4.1.171.11.133.5.1.2.17.2.1.1 | ColumnswL2MulticastFilterPortIndex | read-only | current | Specifies the port number. |
| 1.3.6.1.4.1.171.11.133.5.1.2.17.2.1.2 | ColumnswL2MulticastFilterPortMode | read-write | current | Specifies multicast filter mode for each port. |
| 1.3.6.1.4.1.171.11.133.5.1.2.18 | NodeswL2LoopDetectMgmt | |||
| 1.3.6.1.4.1.171.11.133.5.1.2.18.1 | NodeswL2LoopDetectCtrl | |||
| 1.3.6.1.4.1.171.11.133.5.1.2.18.1.1 | ScalarswL2LoopDetectAdminState | read-write | current | This object indicates the loopback detection status for the system. |
| 1.3.6.1.4.1.171.11.133.5.1.2.18.1.2 | ScalarswL2LoopDetectInterval | read-write | current | This object indicates the interval value, the range is from 1 to 32767 seconds. |
| 1.3.6.1.4.1.171.11.133.5.1.2.18.1.3 | ScalarswL2LoopDetectRecoverTime | read-write | current | This object indicates the recover time, the range is from 60 to 1000000. The value of 0 disables the recover function. |
| 1.3.6.1.4.1.171.11.133.5.1.2.18.1.4 | ScalarswL2LoopDetectMode | read-write | current | This object indicates the loopback detection mode for the system. |
| 1.3.6.1.4.1.171.11.133.5.1.2.18.1.5 | ScalarswL2LoopDetectTrapMode | read-write | current | This object indicates the loopback detection trap mode for the system. |
| 1.3.6.1.4.1.171.11.133.5.1.2.18.2 | NodeswL2LoopDetectPortMgmt | |||
| 1.3.6.1.4.1.171.11.133.5.1.2.18.2.1 | TableswL2LoopDetectPortTable | not-accessible | current | The table specifies the loopback detection function specified by port. |
| 1.3.6.1.4.1.171.11.133.5.1.2.18.2.1.1 | RowswL2LoopDetectPortEntry | not-accessible | current | The table specifies the loopback detection function specified by port. |
| 1.3.6.1.4.1.171.11.133.5.1.2.18.2.1.1.1 | ColumnswL2LoopDetectPortIndex | read-only | current | This object indicates the module's port number. The range is from 1 to the maximum port number specified in the module |
| 1.3.6.1.4.1.171.11.133.5.1.2.18.2.1.1.2 | ColumnswL2LoopDetectPortState | read-write | current | This object indicates the loopback detection function state on the port. |
| 1.3.6.1.4.1.171.11.133.5.1.2.18.2.1.1.3 | ColumnswL2LoopDetectPortLoopVLAN | read-only | current | This object indicates the VLAN list that has detected a loopback. |
| 1.3.6.1.4.1.171.11.133.5.1.2.18.2.1.1.4 | ColumnswL2LoopDetectPortLoopStatus | read-only | current | This object indicates the port status. |
| 1.3.6.1.4.1.171.11.133.5.1.2.100 | NodeswL2MgmtMIBTraps | |||
| 1.3.6.1.4.1.171.11.133.5.1.2.100.1 | NodeswL2Notify | |||
| 1.3.6.1.4.1.171.11.133.5.1.2.100.1.1 | NodeswL2NotifyMgmt | |||
| 1.3.6.1.4.1.171.11.133.5.1.2.100.1.1.1 | ScalarswL2macNotificationSeverity | read-write | current | Indicates the level of macNotification detection. |
| 1.3.6.1.4.1.171.11.133.5.1.2.100.1.1.2 | ScalarswL2PortSecurityViolationSeverity | read-write | current | Indicates the level of PortSecurityViolation detection. |
| 1.3.6.1.4.1.171.11.133.5.1.2.100.1.2 | NodeswL2NotifyPrefix | |||
| 1.3.6.1.4.1.171.11.133.5.1.2.100.1.2.0 | NodeswL2NotifFirmware | |||
| 1.3.6.1.4.1.171.11.133.5.1.2.100.1.2.0.1 | NotificationswL2macNotification | current | This trap indicates the MAC address variations in the address table . | |
| 1.3.6.1.4.1.171.11.133.5.1.2.100.1.2.0.2 | NotificationswL2PortSecurityViolationTrap | current | When the port_security trap is enabled, new MAC addresses that violate the pre-defined port security configuration will trigger trap messages to be sent out. | |
| 1.3.6.1.4.1.171.11.133.5.1.2.100.1.2.0.3 | NotificationswL2PortLoopOccurred | current | The trap is sent when a Port loop occurs. | |
| 1.3.6.1.4.1.171.11.133.5.1.2.100.1.2.0.4 | NotificationswL2PortLoopRestart | current | The trap is sent when a Port loop restarts after the interval time. | |
| 1.3.6.1.4.1.171.11.133.5.1.2.100.1.2.0.5 | NotificationswL2VlanLoopOccurred | current | The trap is sent when a Port with a VID loop occurs. | |
| 1.3.6.1.4.1.171.11.133.5.1.2.100.1.2.0.6 | NotificationswL2VlanLoopRestart | current | The trap is sent when a Port with a VID loop restarts after the interval time. | |
| 1.3.6.1.4.1.171.11.133.5.1.2.100.1.2.1 | Nodeswl2NotificationBidings | |||
| 1.3.6.1.4.1.171.11.133.5.1.2.100.1.2.1.1 | ScalarswL2macNotifyInfo | read-only | current | This object indicates the information for the device MAC address changes. And the detailed information include: Operation Code + MAC address + Box ID + Port Nu… |
| 1.3.6.1.4.1.171.11.133.5.1.2.100.1.2.1.2 | ScalarswL2PortSecurityViolationMac | accessible-for-notify | current | This object indicates the MAC address that violated the port security configuration. |
| 1.3.6.1.4.1.171.11.133.5.1.2.100.1.2.1.3 | ScalarswL2VlanLoopDetectVID | accessible-for-notify | current | This object indicates the VID that detected a loopback. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| IANAifMauAutoNegCapBits | BITS{ bOther(0), b10baseT(1), b10baseTFD(2), b100baseT4(3), b100baseTX(4), b100baseTXFD(5), b100baseT2(6), b100baseT2FD(7), bFdxPause(8), bFdxAPause(9), bFdxSPause(10), bFdxBPause(11), b1000baseX(12), b1000baseXFD(13), b1000baseT(14), b1000baseTFD(15) } | current | This data type is used as the syntax of the swL2PortAutoNegCapabilityBits, swL2PortAutoNegCapAdvertisedBits, and swL2PortAutoNegCapReceivedBits objects in swL2PortAutoNegTable. |