DMON-COMMON-MIB
78 objects
This is the MIB module for COMMON settings in DMON. History 09/09/2011 - Maurice Garcia -Adds -dmonParkModeDwellTime Object -Updatea -UNITS AND SYNTAX from Db to TenthdBmV -cfgBERRulesHI UNIT to trillionth -cfgBERRulesHIHI UNIT to trillionth 09/23/2011 - Maurice Garcia -Missed a couple of entries changing from billionth to trillionth 09/26/2011 - Louis Roy - Modification of the parking control table - dmonParkModeReceiverStatus is now read-only with more values - dmonParkModeReceiverControl have been added - The BERR Rules have been changed to have more flexibility - Pre and Post FEC BER can now have different thresholds 10/22/2011 -Maurice Garcia -Modify Default values for the following from +/-6 to +/-3 and +/-12 to +/-6 -cfgInputPowerRuleHIHI -cfgInputPowerRuleHI -cfgInputPowerRuleLO -cfgInputPowerRuleLOLO -Added Default Values +/-3 and +/-6 -cfgMERRulesLO -cfgMERRulesLOLO -Added seconds unit -dmonParkModeDwellTime -dmonDwellingTIme 10/24/2011 -Maurice Garcia -Added 2 new operational modes -dmonOperationMode -restart (3) -baseline (4) 11/04/2011 -Maurice Garcia -modify for readability -modify units from TenthdBmV to dBmV -modify units from TenthdBm to dB -modify cfgChannelMapSource -changed enumeration and added DEFVAL to dsg(0) -Added -dmonOperation This addtion resulted in a renumbering of the IOD alignment -dmonOperationMode -dmonOperationStatus -dmonOperationAutoScanTask Rename from dmonAutoScanTask to dmonOperationAutoScanTask 11/08/2011 -Maurice Garcia -Modify dmonParkModeDwellTime -Change Syntax to Integer32
Imported Objects
| DMON-MIB | dmonMib ModulationType |
| DOCS-IF-MIB | TenthdB TenthdBmV |
| RFC1213-MIB | DisplayString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 enterprises Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime RowStatus StorageType TimeInterval TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5802.999999.2 | IdentitydmonCommonGroup | This is the MIB module for COMMON settings in DMON. History 09/09/2011 - Maurice Garcia -Adds -dmonParkModeDwellTime Object -Updatea -UNITS AND SYNTAX from Db … | ||
| 1.3.6.1.4.1.5802.999999.2.1 | ScalardmonGpsPosition | read-write | current | Latitude, longitude, and altitude for DMon.Value: D,M,H,D1,M1,H1,A. (D:0~89 latitude degrees; M:0.0~59.9999 latitude minutes; H:N or S hemisphere; D1:0~179 lon… |
| 1.3.6.1.4.1.5802.999999.2.2 | NodedmonOperation | |||
| 1.3.6.1.4.1.5802.999999.2.2.1 | ScalardmonOperationMode | read-write | current | Sets the main operation mode of the monitor. auto: This opearation is the normal Monitoring Mode manual: fast-scan: This mode is to asertain the minimum PHY me… |
| 1.3.6.1.4.1.5802.999999.2.2.2 | ScalardmonOperationStatus | read-only | current | auto: This status is initiated by setting dmonOperationMode to 0 manual: This status is initiated by setting dmonOperationMode to 1 fast-scan: This status is i… |
| 1.3.6.1.4.1.5802.999999.2.2.3 | ScalardmonOperationAutoScanTask | read-write | current | This object provision the auto scan task(s). |
| 1.3.6.1.4.1.5802.999999.2.4 | NodedmonVideoModeTable | |||
| 1.3.6.1.4.1.5802.999999.2.4.1 | ScalardmonVideoModeChannelBandwidth | read-write | current | Determines main bandwidth operating mode, either 6 or 8 MHz channels. Can be overruled by the user specific frequency table which can specify the bandwidth use… |
| 1.3.6.1.4.1.5802.999999.2.5 | TabledmonParkModeControlTable | not-accessible | current | A set of data to control Parking mode. |
| 1.3.6.1.4.1.5802.999999.2.5.1 | RowdmonParkModeControlEntry | not-accessible | current | ... |
| 1.3.6.1.4.1.5802.999999.2.5.1.1 | ColumndmonParkModeReceiverID | read-write | current | The Receiver ID which can do parking mode. |
| 1.3.6.1.4.1.5802.999999.2.5.1.2 | ColumndmonParkModeReceiverStatus | read-only | current | Satus of the Receiver entry. |
| 1.3.6.1.4.1.5802.999999.2.5.1.3 | ColumndmonParkModeReceiverParkingFrequency | read-write | current | The center of the downstream frequency associated with this channel what Receiver trise to park in. |
| 1.3.6.1.4.1.5802.999999.2.5.1.4 | ColumndmonParkModeReceiverSymbolRate | read-write | current | The symbol rate of the parking channel. |
| 1.3.6.1.4.1.5802.999999.2.5.1.5 | ColumndmonParkModeReceiverQamType | read-write | current | The modulation type associated with this channel. Setting it to unknown will disable scanning this channel |
| 1.3.6.1.4.1.5802.999999.2.5.1.6 | ColumndmonParkModeReceiverInverseMode | read-write | current | The inverse mode accociated with this channel. |
| 1.3.6.1.4.1.5802.999999.2.5.1.7 | ColumndmonParkModeDwellTime | read-write | current | Set the amount of time in seconds to have a receiver dwell on a given channel in Parking Mode. Once expire, the receiver must return to default scanning mode. … |
| 1.3.6.1.4.1.5802.999999.2.5.1.8 | ColumndmonParkModeReceiverControl | read-write | current | Whether the receiver is at parking mode. Writing the value NotAvailable(2) will be ignored, this value is only for informational purpose. |
| 1.3.6.1.4.1.5802.999999.2.6 | ScalardmonLocalAccess | read-write | current | Determines wheter local user logged in on the webpages can change the configuration. |
| 1.3.6.1.4.1.5802.999999.2.7 | ScalardmonDwellingTIme | read-write | current | Number of seconds to remain locked on channel for Physical level measurements. |
| 1.3.6.1.4.1.5802.999999.2.8 | ScalardmonLanguageCharset | read-write | current | Sets the encoding of program names. |
| 1.3.6.1.4.1.5802.999999.2.9 | ScalardmonChannelPlan | read-write | current | The frequency table to use. EIA-542 is the default table in the USA. fixed-inc is based on a table used of a fixed-inc table that user specifies the start freq… |
| 1.3.6.1.4.1.5802.999999.2.10 | NodedmonFixedIncTable | |||
| 1.3.6.1.4.1.5802.999999.2.10.1 | ScalardmonFixedIncStartFreq | read-write | current | The start Frequency of the Fixed-inc table. |
| 1.3.6.1.4.1.5802.999999.2.10.2 | ScalardmonFixedIncFreqStep | read-write | current | The incremental step of the Frequency in the Fixed-inc table. |
| 1.3.6.1.4.1.5802.999999.2.10.3 | ScalardmonFixedIncEndFreq | read-write | current | The end Frequency of the Fixed-inc table. |
| 1.3.6.1.4.1.5802.999999.2.10.4 | ScalardmonFixedIncSymbolRate | read-write | current | The Frequency Symbolrate of the Fixed-inc table. |
| 1.3.6.1.4.1.5802.999999.2.10.5 | ScalardmonFixedIncInverseMode | read-write | current | The inverse mode accociated with this channel. |
| 1.3.6.1.4.1.5802.999999.2.10.6 | ScalardmonFixedIncQamType | read-write | current | The modulation type associated with this channel. Setting it to unknown will disable scanning this channel |
| 1.3.6.1.4.1.5802.999999.2.11 | TabledmonUserFreqTable | not-accessible | current | This table defines the set of channel frequencies to scan when DMON is in user defined table mode. The lowest index entries are searched first, skipping over a… |
| 1.3.6.1.4.1.5802.999999.2.11.1 | RowdmonUserFreqEntry | not-accessible | current | Each entry defines a channel frequency to scan during monitoring. |
| 1.3.6.1.4.1.5802.999999.2.11.1.1 | ColumndmonUserFreqProvIndex | not-accessible | current | The index of the Provisioned Gold List entry |
| 1.3.6.1.4.1.5802.999999.2.11.1.2 | ColumndmonUserFreqProvStatus | read-create | current | Controls and reflects the status of rows in this table. Rows in this table may be created by either the create-and-go or create-and-wait paradigms. There is no… |
| 1.3.6.1.4.1.5802.999999.2.11.1.3 | ColumndmonUserFreqProvFrequency | read-write | current | The Frequency used for monitoring. |
| 1.3.6.1.4.1.5802.999999.2.11.1.4 | ColumndmonUserFreqProvModulation | read-write | current | The modulation type associated with this channel. Setting it to unknown will disable scanning this channel |
| 1.3.6.1.4.1.5802.999999.2.11.1.5 | ColumndmonUserFreqProvSymbolRate | read-write | current | Symbolrate to use for scanning. If not set, the default symbolrate will be used. |
| 1.3.6.1.4.1.5802.999999.2.11.1.6 | ColumndmonUserFreqProvInversion | read-write | current | The Inverse mode of this channel,Defaultly disabled |
| 1.3.6.1.4.1.5802.999999.2.18 | NodecfgChannelMap | |||
| 1.3.6.1.4.1.5802.999999.2.18.1 | ScalarcfgChannelMapSource | read-write | current | Specify the source of the channel map This mode is not persistent and MUST be configured at digest of the DOCSIS configuration file during CMTS registration ds… |
| 1.3.6.1.4.1.5802.999999.2.18.2 | TablecfgChannelExclusionTable | not-accessible | current | This is the list of single channels or ranges of channel that must be ignored in the channel map. |
| 1.3.6.1.4.1.5802.999999.2.18.2.1 | RowcfgChannelExclusionEntry | not-accessible | current | Channel exclusion entry definition |
| 1.3.6.1.4.1.5802.999999.2.18.2.1.1 | ColumncfgChannelExclusionIndex | read-only | current | Index into the ChannelExclusion table |
| 1.3.6.1.4.1.5802.999999.2.18.2.1.2 | ColumncfgChannelExclusionStatus | read-create | current | The status of this conceptual row. To create a row in this table, a manager must set this object to either createAndGo(4) or createAndWait(5). Until instances … |
| 1.3.6.1.4.1.5802.999999.2.18.2.1.3 | ColumncfgChannelExclusionStartFrequency | read-create | current | This represents the beginning of the exclusion. If the row represents a single channel, this value will be the same of cfgChannelExclusionStopFrequency. |
| 1.3.6.1.4.1.5802.999999.2.18.2.1.4 | ColumncfgChannelExclusionStopFrequency | read-create | current | This represents the end of the exclusion. If the row represents a single channel, this value will be the same of cfgChannelExclusionStartFrequency |
| 1.3.6.1.4.1.5802.999999.2.18.3 | TablecfgChannelInclusionTable | not-accessible | current | This is the list of single channels or ranges of channels that must be added in the channel map. |
| 1.3.6.1.4.1.5802.999999.2.18.3.1 | RowcfgChannelInclusionEntry | not-accessible | current | Channel inclusion entry definition |
| 1.3.6.1.4.1.5802.999999.2.18.3.1.1 | ColumncfgChannelInclusionIndex | read-only | current | Index into the ChannelInclusion table |
| 1.3.6.1.4.1.5802.999999.2.18.3.1.2 | ColumncfgChannelInclusionStatus | read-create | current | The status of this conceptual row. To create a row in this table, a manager must set this object to either createAndGo(4) or createAndWait(5). Until instances … |
| 1.3.6.1.4.1.5802.999999.2.18.3.1.3 | ColumncfgChannelInclusionType | read-create | current | Indicates the channel type. This may change the monitoring behavior. |
| 1.3.6.1.4.1.5802.999999.2.18.3.1.4 | ColumncfgChannelInclusionModulation | read-create | current | indicate the modulation used on this channel |
| 1.3.6.1.4.1.5802.999999.2.18.3.1.5 | ColumncfgChannelInclusionBandwidth | read-create | current | Indicates the channel bandwidth |
| 1.3.6.1.4.1.5802.999999.2.18.3.1.6 | ColumncfgChannelInclusionStartFrequency | read-create | current | This represents the beginning of the Inclusion. If the row represents a single channel, this value will be the same of cfgChannelInclusionStopFrequency. |
| 1.3.6.1.4.1.5802.999999.2.18.3.1.7 | ColumncfgChannelInclusionStopFrequency | read-create | current | This represents the end of the inclusion. If the row represents a single channel, this value will be the same of cfgChannelInclusionStartFrequency |
| 1.3.6.1.4.1.5802.999999.2.19 | NodecfgPropertyProvisionning | |||
| 1.3.6.1.4.1.5802.999999.2.19.1 | ScalarcfgPropertyProvisionningRunNow | read-write | current | If set to true, a special scan is performed to establish the input Power baseLine. When read, always returns false(2). |
| 1.3.6.1.4.1.5802.999999.2.19.2 | TablecfgInputPowerBaselineResultTable | not-accessible | current | This table show the input power baseline of the last provisionning scan. The entries in this table are stored in non-volatile memory. |
| 1.3.6.1.4.1.5802.999999.2.19.2.1 | RowcfgInputPowerBaselineResultEntry | not-accessible | current | cfgInputPowerBaselineResultTable entry definition |
| 1.3.6.1.4.1.5802.999999.2.19.2.1.1 | ColumncfgInputPowerBaseLineChannelIndex | read-only | current | Index into the cfgInputPowerBaselineResult table |
| 1.3.6.1.4.1.5802.999999.2.19.2.1.2 | ColumncfgInputPowerBaseLineChannelFrequency | read-only | current | The center of the downstream frequency associated with this channel. |
| 1.3.6.1.4.1.5802.999999.2.19.2.1.3 | ColumncfgInputPowerBaseLineChannelPower | read-only | current | The received power level of the channel. |
| 1.3.6.1.4.1.5802.999999.2.19.2.1.4 | ColumncfgInputPowerBaseLineChannelMER | read-only | current | The channel MER. |
| 1.3.6.1.4.1.5802.999999.2.19.2.1.5 | ColumncfgInputPowerBaseLineChannelStatus | read-only | current | This object specifies if the baseline has been successfully retrived for this particular channel during the last scan. The main reason for failure is if the QA… |
| 1.3.6.1.4.1.5802.999999.2.19.3 | NodecfgInputPowerRules | |||
| 1.3.6.1.4.1.5802.999999.2.19.3.1 | ScalarcfgInputPowerRuleHIHI | read-write | current | This represente the offset from the baseline to apply for the HIHI threshold. The entry in this object is stored in non-volatile memory. |
| 1.3.6.1.4.1.5802.999999.2.19.3.2 | ScalarcfgInputPowerRuleHI | read-write | current | This represente the offset from the baseline to apply for the HI threshold. The entry in this object is stored in non-volatile memory. |
| 1.3.6.1.4.1.5802.999999.2.19.3.3 | ScalarcfgInputPowerRuleLO | read-write | current | This represente the offset from the baseline to apply for the LO threshold. The entry in this object is stored in non-volatile memory. |
| 1.3.6.1.4.1.5802.999999.2.19.3.4 | ScalarcfgInputPowerRuleLOLO | read-write | current | This represente the offset from the baseline to apply for the LOLO threshold. The entry in this object is stored in non-volatile memory. |
| 1.3.6.1.4.1.5802.999999.2.19.4 | NodecfgBERRules | |||
| 1.3.6.1.4.1.5802.999999.2.19.4.2 | ScalarcfgPreFECBERRulesHIHI | read-write | current | This represente default HIHI threshold for the PreFEC BER property. The entry in this object is stored in non-volatile memory. |
| 1.3.6.1.4.1.5802.999999.2.19.4.3 | ScalarcfgPreFECBERRulesHI | read-write | current | This represente default HI threshold for the PreFEC BER property. The entry in this object is stored in non-volatile memory. |
| 1.3.6.1.4.1.5802.999999.2.19.4.4 | ScalarcfgPostFECBERRulesHIHI | read-write | current | This represente default HIHI threshold for the PostFEC BER property. The entry in this object is stored in non-volatile memory. |
| 1.3.6.1.4.1.5802.999999.2.19.4.5 | ScalarcfgPostFECBERRulesHI | read-write | current | This represente default HI threshold for the PostFEC BER property. The entry in this object is stored in non-volatile memory. |
| 1.3.6.1.4.1.5802.999999.2.19.5 | TablecfgMERRulesTable | not-accessible | current | This table show the input power baseline of the last provisionning scan. The entries in this table are stored in non-volatile memory. |
| 1.3.6.1.4.1.5802.999999.2.19.5.1 | RowcfgMERRulesEntry | not-accessible | current | cfgMERRulesTable entry definition |
| 1.3.6.1.4.1.5802.999999.2.19.5.1.1 | ColumncfgMERRulesTableIndex | read-only | current | Index into the cfgMERRulesTable table |
| 1.3.6.1.4.1.5802.999999.2.19.5.1.2 | ColumncfgMERRulesLO | read-write | current | This represente default LO threshold for the MER property. The entry in this object is stored in non-volatile memory. |
| 1.3.6.1.4.1.5802.999999.2.19.5.1.3 | ColumncfgMERRulesLOLO | read-write | current | This represente default LOLO threshold for the MER property. The entry in this object is stored in non-volatile memory. |