DMON-PHY-MIB
56 objects
This is the MIB module for DMON PHY measurement. History MG - 09/09/2011 -Updated UNITS from centidBmV to TenthdBmV -Updated MER OIDS UNITS from TenthdBmV to TenthdB MG - 09/23/2011 -Change units from billionth to trillionth MG - 11/04/2011 -Added -dmonPhyInfoManagement -dmonPhyInfoMgtHistoryRetention -Change UNITS from TenthdBmv to dBmv -Change UNITS from TenthdB to dB
Imported Objects
| DMON-MIB | dmonMib ModulationType |
| DOCS-IF-MIB | DocsEqualizerData TenthdB TenthdBmV |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 enterprises Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime RowStatus StorageType TimeInterval TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5802.999999.1 | IdentitydmonPhyGroup | This is the MIB module for DMON PHY measurement. History MG - 09/09/2011 -Updated UNITS from centidBmV to TenthdBmV -Updated MER OIDS UNITS from TenthdBmV to T… | ||
| 1.3.6.1.4.1.5802.999999.1.1 | NodedmonPhyInfoManagement | |||
| 1.3.6.1.4.1.5802.999999.1.1.1 | ScalardmonPhyInfoMgtHistoryRetention | read-write | current | The total amount of seconds that the DMon must retain PHY History in RAM memory. Once this OID value is set, it MUST be preserved in non-volatile memory and re… |
| 1.3.6.1.4.1.5802.999999.1.2 | TabledmonPhyInfoTable | not-accessible | current | This table describes the attributes of downstream channels (frequency bands). |
| 1.3.6.1.4.1.5802.999999.1.2.1 | RowdmonPhyInfoEntry | not-accessible | current | An entry provides a list of attributes for a single downstream channel. An entry in this table exists for each downstream channel |
| 1.3.6.1.4.1.5802.999999.1.2.1.1 | ColumndmonPhyChannelIndex | not-accessible | current | The downstream channel index starting from 1. |
| 1.3.6.1.4.1.5802.999999.1.2.1.2 | ColumndmonPhyChannelLockedtime | read-only | current | The date and time of the reading |
| 1.3.6.1.4.1.5802.999999.1.2.1.3 | ColumndmonPhyChannelFrequency | read-only | current | The center of the downstream frequency associated with this channel. This object will return the current tuner frequency. |
| 1.3.6.1.4.1.5802.999999.1.2.1.4 | ColumndmonPhyChannelModulation | read-only | current | The modulation type associated with this downstream channel. If the interface is down, this object either returns the most current value, or the value of unkno… |
| 1.3.6.1.4.1.5802.999999.1.2.1.5 | ColumndmonPhyChannelPower | read-only | current | The received power level of the channel. If the interface is down, this object either returns the most current value or the value of 0. See the reference for r… |
| 1.3.6.1.4.1.5802.999999.1.2.1.6 | ColumndmonPhyChannelAnnex | read-only | current | The value of this object indicates the conformance of the implementation to important regional cable standards. annexA : Annex A from ITU-T J.83 is used. (equi… |
| 1.3.6.1.4.1.5802.999999.1.2.1.7 | ColumndmonPhyChannelSigQUnerroreds | read-only | current | Codewords received on this channel without error. |
| 1.3.6.1.4.1.5802.999999.1.2.1.8 | ColumndmonPhyChannelSigQCorrecteds | read-only | current | Codewords received on this channel with correctable errors. |
| 1.3.6.1.4.1.5802.999999.1.2.1.9 | ColumndmonPhyChannelSigQUncorrectables | read-only | current | Codewords received on this channel with uncorrectable errors. |
| 1.3.6.1.4.1.5802.999999.1.2.1.10 | ColumndmonPhyChannelSigQMER | read-only | current | Modulation error ratio of the monitored channel |
| 1.3.6.1.4.1.5802.999999.1.2.1.11 | ColumndmonPhyChannelSigQPreFECBER | read-only | current | Bit-error-rate of the monitored channel before FEC repair |
| 1.3.6.1.4.1.5802.999999.1.2.1.12 | ColumndmonPhyChannelSigQPostFECBER | read-only | current | Bit-error-rate of the monitored channel after FEC repair |
| 1.3.6.1.4.1.5802.999999.1.2.1.13 | ColumndmonPhyChannelSigQCER | read-only | current | codeword-error-rate of the monitored channel |
| 1.3.6.1.4.1.5802.999999.1.2.1.14 | ColumndmonPhyChannelSigQECR | read-only | current | codeword error-corrected-rate of the monitored channel |
| 1.3.6.1.4.1.5802.999999.1.2.1.15 | ColumndmonPhyChannelInterleave | read-only | current | The Forward Error Correction (FEC) interleaving used for this downstream channel. Values are defined as follows: taps8Increment16(3): protection 5.9/4.1 usec, … |
| 1.3.6.1.4.1.5802.999999.1.2.1.16 | ColumndmonPhyChannelSigQEqualizationData | read-only | current | This object returns the equalization data for the downstream channel. |
| 1.3.6.1.4.1.5802.999999.1.2.1.17 | ColumndmonPhyChannelSigScanId | read-only | current | Id generated by the dmon to identify a set of data. This Id will be send in the scan finish message. It will help the CPS to identify the data set. |
| 1.3.6.1.4.1.5802.999999.1.2.1.18 | ColumndmonPhyChannelPowerMin | read-only | current | The min value of the received power level of the channel during the dwelling time. |
| 1.3.6.1.4.1.5802.999999.1.2.1.19 | ColumndmonPhyChannelPowerMax | read-only | current | The max value of the received power level of the channel during the dwelling time. |
| 1.3.6.1.4.1.5802.999999.1.2.1.20 | ColumndmonPhyChannelSigQMERMin | read-only | current | The min value of the modulation error ratio of the monitored channel during the dwelling time. |
| 1.3.6.1.4.1.5802.999999.1.2.1.21 | ColumndmonPhyChannelSigQMERMax | read-only | current | The max value of the modulation error ratio of the monitored channel during the dwelling time. |
| 1.3.6.1.4.1.5802.999999.1.2.1.22 | ColumndmonPhyChannelScanMode | read-only | current | The value of this object indicates the result of the measurement is from. |
| 1.3.6.1.4.1.5802.999999.1.2.1.23 | ColumndmonPhyChannelQAMlocked | read-only | current | Indicates whether QAM is locked. If not locked, Most of the columns in this entry are not valid. |
| 1.3.6.1.4.1.5802.999999.1.2.1.24 | ColumndmonPhyChannelFEClocked | read-only | current | Indicates whether FEC is locked. If not locked, post FEC values in this entry are not valid. |
| 1.3.6.1.4.1.5802.999999.1.3 | TabledmonPhyHistoryInfoTable | not-accessible | current | This table describes the history attributes of downstream channels (frequency bands). |
| 1.3.6.1.4.1.5802.999999.1.3.1 | RowdmonPhyHistoryInfoEntry | not-accessible | current | An entry provides a list of history attributes for a single downstream channel. An entry in this table exists for each downstream channel |
| 1.3.6.1.4.1.5802.999999.1.3.1.1 | ColumndmonPhyHistoryChannelIndex | not-accessible | current | The history downstream channel index starting from 1. |
| 1.3.6.1.4.1.5802.999999.1.3.1.2 | ColumndmonPhyHistoryIndex | not-accessible | current | The history index starting from 1. |
| 1.3.6.1.4.1.5802.999999.1.3.1.3 | ColumndmonPhyHistoryChannelLockedtime | read-only | current | The history date and time of the reading |
| 1.3.6.1.4.1.5802.999999.1.3.1.4 | ColumndmonPhyHistoryChannelFrequency | read-only | current | The history center of the downstream frequency associated with this channel. This object will return the current tuner frequency. |
| 1.3.6.1.4.1.5802.999999.1.3.1.5 | ColumndmonPhyHistoryChannelModulation | read-only | current | The history modulation type associated with this downstream channel. If the interface is down, this object either returns the most current value, or the value … |
| 1.3.6.1.4.1.5802.999999.1.3.1.6 | ColumndmonPhyHistoryChannelPower | read-only | current | The history received power level of the channel. If the interface is down, this object either returns the most current value or the value of 0. See the referen… |
| 1.3.6.1.4.1.5802.999999.1.3.1.7 | ColumndmonPhyHistoryChannelAnnex | read-only | current | The history value of this object indicates the conformance of the implementation to important regional cable standards. annexA : Annex A from ITU-T J.83 is use… |
| 1.3.6.1.4.1.5802.999999.1.3.1.8 | ColumndmonPhyHistoryChannelSigQUnerroreds | read-only | current | The history codewords received on this channel without error. |
| 1.3.6.1.4.1.5802.999999.1.3.1.9 | ColumndmonPhyHistoryChannelSigQCorrecteds | read-only | current | The history codewords received on this channel with correctable errors. |
| 1.3.6.1.4.1.5802.999999.1.3.1.10 | ColumndmonPhyHistoryChannelSigQUncorrectables | read-only | current | The history codewords received on this channel with uncorrectable errors. |
| 1.3.6.1.4.1.5802.999999.1.3.1.11 | ColumndmonPhyHistoryChannelSigQMER | read-only | current | The history modulation error ratio of the monitored channel |
| 1.3.6.1.4.1.5802.999999.1.3.1.12 | ColumndmonPhyHistoryChannelSigQPreFECBER | read-only | current | The history bit-error-rate of the monitored channel before FEC repair |
| 1.3.6.1.4.1.5802.999999.1.3.1.13 | ColumndmonPhyHistoryChannelSigQPostFECBER | read-only | current | The history bit-error-rate of the monitored channel after FEC repair |
| 1.3.6.1.4.1.5802.999999.1.3.1.14 | ColumndmonPhyHistoryChannelSigQCER | read-only | current | The history codeword-error-rate of the monitored channel |
| 1.3.6.1.4.1.5802.999999.1.3.1.15 | ColumndmonPhyHistoryChannelSigQECR | read-only | current | The history codeword error-corrected-rate of the monitored channel |
| 1.3.6.1.4.1.5802.999999.1.3.1.16 | ColumndmonPhyHistoryChannelInterleave | read-only | current | The history Forward Error Correction (FEC) interleaving used for this downstream channel. Values are defined as follows: taps8Increment16(3): protection 5.9/4.… |
| 1.3.6.1.4.1.5802.999999.1.3.1.17 | ColumndmonPhyHistoryChannelSigQEqualizationData | read-only | current | This object returns the hisotry equalization data for the downstream channel. |
| 1.3.6.1.4.1.5802.999999.1.3.1.18 | ColumndmonPhyHistoryChannelSigScanId | read-only | current | Id generated by the dmon to identify a set of data. This Id will be send in the scan finish message. It will help the CPS to identify the data set. |
| 1.3.6.1.4.1.5802.999999.1.3.1.19 | ColumndmonPhyHistoryChannelPowerMin | read-only | current | The min value of the received power level of the channel during the dwelling time. |
| 1.3.6.1.4.1.5802.999999.1.3.1.20 | ColumndmonPhyHistoryChannelPowerMax | read-only | current | The max value of the received power level of the channel during the dwelling time. |
| 1.3.6.1.4.1.5802.999999.1.3.1.21 | ColumndmonPhyHistoryChannelSigQMERMin | read-only | current | The min value of the modulation error ratio of the monitored channel during the dwelling time. |
| 1.3.6.1.4.1.5802.999999.1.3.1.22 | ColumndmonPhyHistoryChannelSigQMERMax | read-only | current | The max value of the modulation error ratio of the monitored channel during the dwelling time. |
| 1.3.6.1.4.1.5802.999999.1.3.1.23 | ColumndmonPhyHistoryChannelScanMode | read-only | current | The value of this object indicates the result of the measurement is from. |
| 1.3.6.1.4.1.5802.999999.1.3.1.24 | ColumndmonPhyHistoryChannelQAMlocked | read-only | current | Indicates whether QAM is locked. If not locked, Most of the columns in this entry are not valid. |
| 1.3.6.1.4.1.5802.999999.1.3.1.25 | ColumndmonPhyHistoryChannelFEClocked | read-only | current | Indicates whether FEC is locked. If not locked, post FEC values in this entry are not valid. |