DOCS-DRF-MIB
43 objects
This MIB module contains the management objects for the management of the Downstream RF Interface specification. Copyright 1999-2008 Cable Television Laboratories, Inc. All rights reserved.
Imported Objects
| CLAB-DEF-MIB | clabProjDocsis |
| DOCS-IF-MIB | docsIfDownstreamChannelEntry |
| ENTITY-MIB | PhysicalIndex PhysicalIndexOrZero |
| IF-MIB | ifIndex InterfaceIndexOrZero |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | AutonomousType TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4491.2.1.23 | IdentitydocsDrfMib | This MIB module contains the management objects for the management of the Downstream RF Interface specification. Copyright 1999-2008 Cable Television Laborator… | ||
| 1.3.6.1.4.1.4491.2.1.23.0 | NodedocsDrfNotifications | |||
| 1.3.6.1.4.1.4491.2.1.23.1 | NodedocsDrfObjects | |||
| 1.3.6.1.4.1.4491.2.1.23.1.1 | IdentitydocsDrfRegistry | current | Registration point for M-CMTS characterization of PHY parameters dependencies. | |
| 1.3.6.1.4.1.4491.2.1.23.1.1.1 | IdentitydocsDrfPhyParamFixValue | current | Indicates that this PHY parameter is fixed and cannot be changed. | |
| 1.3.6.1.4.1.4491.2.1.23.1.1.2 | IdentitydocsDrfPhyParamSameValue | current | Indicates that the PHY parameter value is the same for the elements in a dependency group; thus, a change in the PHY parameter of an element in the group will … | |
| 1.3.6.1.4.1.4491.2.1.23.1.1.3 | IdentitydocsDrfPhyParamAdjacentValues | current | Indicates that the PHY parameter has an adjacency or sequence pattern for the elements in a dependency group e.g., A group of channels all using J.83 Annex A, … | |
| 1.3.6.1.4.1.4491.2.1.23.1.1.4 | IdentitydocsDrfPhyParamFrequencyRange | current | This object indicates that the frequency in a TSID Group is constrained to a frequency range. Vendors may extend the MIB construct containing this reference to… | |
| 1.3.6.1.4.1.4491.2.1.23.1.2 | TabledocsDrfDownstreamTable | not-accessible | current | Extensions for the DOCSIS RFI Downstream docsIfDownstreamChannelTable. |
| 1.3.6.1.4.1.4491.2.1.23.1.2.1 | RowdocsDrfDownstreamEntry | not-accessible | current | A conceptual row for this table. There is a corresponding entry for each entry of docsIfDownstreamChannelTable. |
| 1.3.6.1.4.1.4491.2.1.23.1.2.1.1 | ColumndocsDrfDownstreamPhyDependencies | read-only | current | The summary of the Downstream Interface dependencies based on the constraints of docsDrfGroupDependencyEntry. A BIT position set to '1' indicates the PHY param… |
| 1.3.6.1.4.1.4491.2.1.23.1.3 | TabledocsDrfDownstreamCapabilitiesTable | not-accessible | current | This table contains the QAM channel capabilities for the Downstream Interface PHY parameters. |
| 1.3.6.1.4.1.4491.2.1.23.1.3.1 | RowdocsDrfDownstreamCapabilitiesEntry | not-accessible | current | A conceptual row for this table. |
| 1.3.6.1.4.1.4491.2.1.23.1.3.1.1 | ColumndocsDrfDownstreamCapabFrequency | read-only | current | The QAM channel frequency capabilities. 'qamDependency' BIT set to '1' indicates the QAM channel frequency value has dependencies with other QAM channels and a… |
| 1.3.6.1.4.1.4491.2.1.23.1.3.1.2 | ColumndocsDrfDownstreamCapabBandwidth | read-only | current | The QAM channel Bandwidth capabilities. 'qamDependency' BIT set to '1' indicates the QAM channel bandwidth value has dependencies with other QAM channels as in… |
| 1.3.6.1.4.1.4491.2.1.23.1.3.1.3 | ColumndocsDrfDownstreamCapabPower | read-only | current | The QAM channel Power capabilities. 'qamDependency' BIT set to '1' indicates the QAM channel power value has dependencies with other QAM channels as indicated … |
| 1.3.6.1.4.1.4491.2.1.23.1.3.1.4 | ColumndocsDrfDownstreamCapabModulation | read-only | current | The QAM channel Modulation capabilities. 'qamDependency' BIT set to '1' indicates the QAM channel modulation value has dependencies with other QAM channels as … |
| 1.3.6.1.4.1.4491.2.1.23.1.3.1.5 | ColumndocsDrfDownstreamCapabInterleaver | read-only | current | The QAM channel Interleaver capabilities. 'qamDependency' BIT set to '1' indicates the QAM channel interleave value has dependencies with other QAM channels as… |
| 1.3.6.1.4.1.4491.2.1.23.1.3.1.6 | ColumndocsDrfDownstreamCapabJ83Annex | read-only | current | The QAM channel J.83 Annex Capabilities. 'qamDependency' BIT set to '1' indicates the QAM channel J.83 Annex value has dependencies with other QAM channels as … |
| 1.3.6.1.4.1.4491.2.1.23.1.3.1.7 | ColumndocsDrfDownstreamCapabConcurrentServices | read-only | current | The QAM channel Concurrent Services Capabilities. 'qamDependency' BIT set to '1' indicates the QAM channel is part of a dependency group that supports concurre… |
| 1.3.6.1.4.1.4491.2.1.23.1.3.1.8 | ColumndocsDrfDownstreamCapabServicesTransport | read-only | current | The QAM channel Services transports modes Capabilities. 'qamDependency' BIT set to '1' indicates the QAM channel Service transport type has dependencies with o… |
| 1.3.6.1.4.1.4491.2.1.23.1.3.1.9 | ColumndocsDrfDownstreamCapabMuting | read-only | current | The QAM channel muting capabilities. 'qamDependency' BIT set to '1' indicates the QAM Mute state has dependencies with other QAM channels as indicated in docsD… |
| 1.3.6.1.4.1.4491.2.1.23.1.4 | TabledocsDrfGroupDependencyTable | not-accessible | current | This table describes the rules that identify groups of QAM channels with PHY parameters dependencies. A PHY parameter dependency group means that a set to a QA… |
| 1.3.6.1.4.1.4491.2.1.23.1.4.1 | RowdocsDrfGroupDependencyEntry | not-accessible | current | A conceptual row of this table. QAM channels are modeled as PhysicalClass 'port' from the ENTITY-MIB. An QAM channel can be represented as part of an entity MI… |
| 1.3.6.1.4.1.4491.2.1.23.1.4.1.1 | ColumndocsDrfGroupDependencyPhyParam | not-accessible | current | This object represents the type of PHY parameter that may have dependencies when setting an individual object in the dependency group. The value 'all' may be u… |
| 1.3.6.1.4.1.4491.2.1.23.1.4.1.2 | ColumndocsDrfGroupDependencyPhysicalIndex | not-accessible | current | Indicates the physical element from where the PHY parameter dependency for QAM channels is derived. All the QAM channels elements under this Physical index wil… |
| 1.3.6.1.4.1.4491.2.1.23.1.4.1.3 | ColumndocsDrfGroupDependencyGroupID | read-only | current | The internal ID assigned for the QAM channels in the dependency group. The value of this object is unique in the scope of the PHY parameter being mapped. |
| 1.3.6.1.4.1.4491.2.1.23.1.4.1.4 | ColumndocsDrfGroupDependencyType | read-only | current | The description of the type of dependency associated with this dependency group. Basic type of dependencies are docsDrfPhyParamSameValue, docsDrfPhyParamAdjace… |
| 1.3.6.1.4.1.4491.2.1.23.1.5 | TabledocsDrfChannelBlockTable | not-accessible | current | This table configure attributes of block channels and Controls channel Block Tests. A channel block is an ENTITY-MIB containment of PhysicalClass 'module' that… |
| 1.3.6.1.4.1.4491.2.1.23.1.5.1 | RowdocsDrfChannelBlockEntry | not-accessible | current | The conceptual row of this table. Entries in this table are created at system Initialization for Block Channels compliant to DRFI Specification. Sets in entrie… |
| 1.3.6.1.4.1.4491.2.1.23.1.5.1.1 | ColumndocsDrfChannelBlockPhysicalIndex | not-accessible | current | The Physical Index of the QAM Channel Block. |
| 1.3.6.1.4.1.4491.2.1.23.1.5.1.2 | ColumndocsDrfChannelBlockNumberChannels | read-only | current | The Number of QAM Channels N associated with this entry. The value of this attribute corresponds to the number of channels that can be transmitted from this bl… |
| 1.3.6.1.4.1.4491.2.1.23.1.5.1.3 | ColumndocsDrfChannelBlockCfgNumberChannels | read-write | current | The Number of QAM Channels N' to configure for the QAM block. This number corresponds to the number of channels that are configured to be currently transmitted… |
| 1.3.6.1.4.1.4491.2.1.23.1.5.1.4 | ColumndocsDrfChannelBlockMute | read-write | current | The Mute control object for the Block Channel. A set to this object to 'true' is reflected in ifOperStatus set to 'down' of the QAM channels associated to the … |
| 1.3.6.1.4.1.4491.2.1.23.1.5.1.5 | ColumndocsDrfChannelBlockTestType | read-write | current | A set of in-service and out-of-service test modes. The value 'noTest'(1) is the normal condition after reinitialization where the QAM channels are expected in … |
| 1.3.6.1.4.1.4491.2.1.23.1.5.1.6 | ColumndocsDrfChannelBlockTestIfIndex | read-write | current | The ifIndex of the QAM channel to perform the QAM channel test. A Set to a value that does not correspond to a QAM Channel within the Block channel returns err… |
| 1.3.6.1.4.1.4491.2.1.23.2 | NodedocsDrfConformance | |||
| 1.3.6.1.4.1.4491.2.1.23.2.1 | NodedocsDrfCompliances | |||
| 1.3.6.1.4.1.4491.2.1.23.2.1.1 | CompliancedocsDrfDeviceCompliance | current | The compliance statement DOCSIS DRFI compliant devices. | |
| 1.3.6.1.4.1.4491.2.1.23.2.1.2 | CompliancedocsDrfCmtsCompliance | current | The compliance statement for CMTS compliant devices. | |
| 1.3.6.1.4.1.4491.2.1.23.2.2 | NodedocsDrfGroups | |||
| 1.3.6.1.4.1.4491.2.1.23.2.2.1 | GroupdocsDrfGroup | current | Group of objects implemented in M-CMTS compliant devices. | |
| 1.3.6.1.4.1.4491.2.1.23.2.2.2 | GroupdocsDrfCmtsGroup | current | Group of objects specific for CMTS. |