DOCS-IF3-MIB
260 objects
This MIB module contains the management objects for the management of DOCSIS 3.0 features, primarly channel bonding, interface topology and enhanced signal quality montoring. Copyright 1999-2010 Cable Television Laboratories, Inc. All rights reserved.
Imported Objects
| CLAB-DEF-MIB | -- RFC 4639 clabProjDocsis |
| CLAB-TOPO-MIB | -- RFC 4546 NodeName |
| DOCS-CABLE-DEVICE-MIB | docsDevEvId docsDevEvLastTime docsDevEvLevel docsDevEvText |
| DOCS-IF-MIB | -- RFC 2863 TenthdB DocsEqualizerData DocsisQosVersion DocsisUpstreamType TenthdBmV |
| IF-MIB | -- RFC 4001 ifIndex InterfaceIndex InterfaceIndexOrZero |
| INET-ADDRESS-MIB | -- RFC 3413 InetAddressIPv6 InetAddressIPv4 |
| SNMP-FRAMEWORK-MIB | -- RFC 2580 SnmpAdminString |
| SNMP-TARGET-MIB | -- RFC 3411 SnmpTagList |
| SNMPv2-CONF | -- RFC 2579 OBJECT-GROUP MODULE-COMPLIANCE NOTIFICATION-GROUP |
| SNMPv2-MIB | -- RFC 2578 sysName |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | -- RFC 3418 TEXTUAL-CONVENTION DateAndTime MacAddress RowStatus StorageType TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4491.2.1.20 | IdentitydocsIf3Mib | This MIB module contains the management objects for the management of DOCSIS 3.0 features, primarly channel bonding, interface topology and enhanced signal qua… | ||
| 1.3.6.1.4.1.4491.2.1.20.0 | NodedocsIf3Notifications | |||
| 1.3.6.1.4.1.4491.2.1.20.0.1 | NotificationdocsIf3CmtsEventNotif | current | A notification to report a DOCSIS event detected on the CMTS. This notification includes the following information: - docsDevEvLevel: the DOCSIS priority level… | |
| 1.3.6.1.4.1.4491.2.1.20.0.2 | NotificationdocsIf3CmEventNotif | current | A notification to report a DOCSIS event detected on the CM. This notification includes the following information: - docsDevEvLevel: the priority level associat… | |
| 1.3.6.1.4.1.4491.2.1.20.1 | NodedocsIf3MibObjects | |||
| 1.3.6.1.4.1.4491.2.1.20.1.1 | TabledocsIf3CmStatusTable | not-accessible | current | This object defines attributes of the CM connectivity status.This object provides CM connectivity status information of the CM previously available in the SNMP… |
| 1.3.6.1.4.1.4491.2.1.20.1.1.1 | RowdocsIf3CmStatusEntry | not-accessible | current | The conceptual row of docsIf3CmStatusTable. An instance exist for the CM MAC Domain Interface. |
| 1.3.6.1.4.1.4491.2.1.20.1.1.1.1 | ColumndocsIf3CmStatusValue | read-only | current | This attribute denotes the current CM connectivity state. For the case of IP acquisition related states, this attribute reflects states for the current CM prov… |
| 1.3.6.1.4.1.4491.2.1.20.1.1.1.2 | ColumndocsIf3CmStatusCode | read-only | current | This attribute denotes the status code for CM as defined in the OSSI Specification. The status code consists of a single character indicating error groups, fol… |
| 1.3.6.1.4.1.4491.2.1.20.1.1.1.3 | ColumndocsIf3CmStatusResets | read-only | current | This attribute denotes the number of times the CM reset or initialized this interface. Discontinuities in the value of this counter can occur at re-initializat… |
| 1.3.6.1.4.1.4491.2.1.20.1.1.1.4 | ColumndocsIf3CmStatusLostSyncs | read-only | current | This attribute denotes the number of times the CM lost synchronization with the downstream channel. Discontinuities in the value of this counter can occur at r… |
| 1.3.6.1.4.1.4491.2.1.20.1.1.1.5 | ColumndocsIf3CmStatusInvalidMaps | read-only | current | This attribute denotes the number of times the CM received invalid MAP messages. Discontinuities in the value of this counter can occur at re-initialization of… |
| 1.3.6.1.4.1.4491.2.1.20.1.1.1.6 | ColumndocsIf3CmStatusInvalidUcds | read-only | current | This attribute denotes the number of times the CM received invalid UCD messages. Discontinuities in the value of this counter can occur at re-initialization of… |
| 1.3.6.1.4.1.4491.2.1.20.1.1.1.7 | ColumndocsIf3CmStatusInvalidRangingRsps | read-only | current | This attribute denotes the number of times the CM received invalid ranging response messages. Discontinuities in the value of this counter can occur at re-init… |
| 1.3.6.1.4.1.4491.2.1.20.1.1.1.8 | ColumndocsIf3CmStatusInvalidRegRsps | read-only | current | This attribute denotes the number of times the CM received invalid registration response messages. Discontinuities in the value of this counter can occur at re… |
| 1.3.6.1.4.1.4491.2.1.20.1.1.1.9 | ColumndocsIf3CmStatusT1Timeouts | read-only | current | This attribute denotes the number of times counter T1 expired in the CM. Discontinuities in the value of this counter can occur at re-initialization of the man… |
| 1.3.6.1.4.1.4491.2.1.20.1.1.1.10 | ColumndocsIf3CmStatusT2Timeouts | read-only | current | This attribute denotes the number of times counter T2 expired in the CM. Discontinuities in the value of this counter can occur at re-initialization of the man… |
| 1.3.6.1.4.1.4491.2.1.20.1.1.1.11 | ColumndocsIf3CmStatusUCCsSuccesses | read-only | current | This attribute denotes the number of successful Upstream Channel Change transactions. Discontinuities in the value of this counter can occur at re-initializati… |
| 1.3.6.1.4.1.4491.2.1.20.1.1.1.12 | ColumndocsIf3CmStatusUCCFails | read-only | current | This attribute denotes the number of failed Upstream Channel Change transactions. Discontinuities in the value of this counter can occur at re-initialization o… |
| 1.3.6.1.4.1.4491.2.1.20.1.1.1.13 | ColumndocsIf3CmStatusEnergyMgt1x1OperStatus | read-only | current | This attribute indicates whether the CM is currently operating in Energy Management 1x1 Mode. If this attribute returns 'true', the CM is operating in Energy M… |
| 1.3.6.1.4.1.4491.2.1.20.1.2 | TabledocsIf3CmStatusUsTable | not-accessible | current | This object defines PHY and MAC information about the CM's upstream channels operating in Multiple Transmit Channel (MTC) mode or in a Pre-3.0 DOSCIS transmit … |
| 1.3.6.1.4.1.4491.2.1.20.1.2.1 | RowdocsIf3CmStatusUsEntry | not-accessible | current | The conceptual row of docsIf3CmStatusUsTable. An instance exist for the CM upstream channels configured for data transmission. |
| 1.3.6.1.4.1.4491.2.1.20.1.2.1.1 | ColumndocsIf3CmStatusUsTxPower | read-only | current | This attribute represents the operational CM transmit power for this upstream channel. |
| 1.3.6.1.4.1.4491.2.1.20.1.2.1.2 | ColumndocsIf3CmStatusUsT3Timeouts | read-only | current | This attribute denotes the number of times counter T3 expired in the CM for this upstream channel. Discontinuities in the value of this counter can occur at re… |
| 1.3.6.1.4.1.4491.2.1.20.1.2.1.3 | ColumndocsIf3CmStatusUsT4Timeouts | read-only | current | This attribute denotes the number of times counter T4 expired in the CM for this upstream channel. Discontinuities in the value of this counter can occur at re… |
| 1.3.6.1.4.1.4491.2.1.20.1.2.1.4 | ColumndocsIf3CmStatusUsRangingAborteds | read-only | current | This attribute denotes the number of times the ranging process was aborted by the CMTS. Discontinuities in the value of this counter can occur at re-initializa… |
| 1.3.6.1.4.1.4491.2.1.20.1.2.1.5 | ColumndocsIf3CmStatusUsModulationType | read-only | current | This attribute indicates modulation type status currently used by the CM for this upstream channel. Since this object specifically identifies PHY Layer mode, t… |
| 1.3.6.1.4.1.4491.2.1.20.1.2.1.6 | ColumndocsIf3CmStatusUsEqData | read-only | current | This attribute indicates the pre-equalization data for the specified upstream Channel on this CM after convolution with data indicated in the RNG-RSP. This dat… |
| 1.3.6.1.4.1.4491.2.1.20.1.2.1.7 | ColumndocsIf3CmStatusUsT3Exceededs | read-only | current | This attribute denotes the number of times for excessive T3 timeouts. Discontinuities in the value of this counter can occur at re-initialization of the manage… |
| 1.3.6.1.4.1.4491.2.1.20.1.2.1.8 | ColumndocsIf3CmStatusUsIsMuted | read-only | current | This attribute denotes whether the upstream channel is muted. |
| 1.3.6.1.4.1.4491.2.1.20.1.2.1.9 | ColumndocsIf3CmStatusUsRangingStatus | read-only | current | This attribute denotes the ranging state of the CM. |
| 1.3.6.1.4.1.4491.2.1.20.1.3 | TabledocsIf3CmtsCmRegStatusTable | not-accessible | current | This object defines attributes that represent the CM's registration status as tracked by the CMTS. |
| 1.3.6.1.4.1.4491.2.1.20.1.3.1 | RowdocsIf3CmtsCmRegStatusEntry | not-accessible | current | The conceptual row of docsIf3CmtsCmRegStatusTable. |
| 1.3.6.1.4.1.4491.2.1.20.1.3.1.1 | ColumndocsIf3CmtsCmRegStatusId | not-accessible | current | This attribute uniquely identifies a CM. The CMTS must assign a single id value for each CM MAC address seen by the CMTS. The CMTS should ensure that the assoc… |
| 1.3.6.1.4.1.4491.2.1.20.1.3.1.2 | ColumndocsIf3CmtsCmRegStatusMacAddr | read-only | current | This attribute represents the MAC address of the CM. If the CM has multiple MAC addresses, this is the MAC address associated with the MAC Domain interface. |
| 1.3.6.1.4.1.4491.2.1.20.1.3.1.3 | ColumndocsIf3CmtsCmRegStatusIPv6Addr | read-only | current | This attribute represents the IPv6 address of the CM. If the CM has no Internet address assigned, or the Internet address is unknown, the value of this attribu… |
| 1.3.6.1.4.1.4491.2.1.20.1.3.1.4 | ColumndocsIf3CmtsCmRegStatusIPv6LinkLocal | read-only | current | This attribute represents the IPv6 local scope address of the CM. If the CM has no link local address assigned, or the Internet address is unknown, the value o… |
| 1.3.6.1.4.1.4491.2.1.20.1.3.1.5 | ColumndocsIf3CmtsCmRegStatusIPv4Addr | read-only | current | This attribute represents the IPv4 address of this CM. If the CM has no IP address assigned, or the IP address is unknown, this object returns 0.0.0.0. |
| 1.3.6.1.4.1.4491.2.1.20.1.3.1.6 | ColumndocsIf3CmtsCmRegStatusValue | read-only | current | This attribute represents the current CM connectivity state. |
| 1.3.6.1.4.1.4491.2.1.20.1.3.1.7 | ColumndocsIf3CmtsCmRegStatusMdIfIndex | read-only | current | This attribute represents the interface Index of the CMTS MAC Domain where the CM is active. If the interface is unknown, the CMTS returns a value of zero. |
| 1.3.6.1.4.1.4491.2.1.20.1.3.1.8 | ColumndocsIf3CmtsCmRegStatusMdCmSgId | read-only | current | This attribute represents the ID of the MAC Domain CM Service Group Id (MD-CM-SG-ID) in which the CM is registered. If the ID is unknown, the CMTS returns a va… |
| 1.3.6.1.4.1.4491.2.1.20.1.3.1.9 | ColumndocsIf3CmtsCmRegStatusRcpId | read-only | current | This attribute represents the RCP-ID associated with the CM. If the RCP-ID is unknown the CMTS returns a five octet long string of zeros. |
| 1.3.6.1.4.1.4491.2.1.20.1.3.1.10 | ColumndocsIf3CmtsCmRegStatusRccStatusId | read-only | current | This attribute represents the RCC Id the CMTS used to configure the CM receive channel set during the registration process. If unknown, the CMTS returns the va… |
| 1.3.6.1.4.1.4491.2.1.20.1.3.1.11 | ColumndocsIf3CmtsCmRegStatusRcsId | read-only | current | This attribute represents the Receive Channel Set (RCS) that the CM is currently using. If the RCS is unknown, the CMTS returns the value zero. |
| 1.3.6.1.4.1.4491.2.1.20.1.3.1.12 | ColumndocsIf3CmtsCmRegStatusTcsId | read-only | current | This attribute represents Transmit Channel Set (TCS) the CM is currently using. If the TCS is unknown, the CMTS returns the value zero. |
| 1.3.6.1.4.1.4491.2.1.20.1.3.1.13 | ColumndocsIf3CmtsCmRegStatusQosVersion | read-only | current | This attribute denotes the queuing services the CM registered, either DOCSIS 1.1 QoS or DOCSIS 1.0 CoS mode. |
| 1.3.6.1.4.1.4491.2.1.20.1.3.1.14 | ColumndocsIf3CmtsCmRegStatusLastRegTime | read-only | current | This attribute represents the last time the CM registered. |
| 1.3.6.1.4.1.4491.2.1.20.1.3.1.15 | ColumndocsIf3CmtsCmRegStatusAddrResolutionReqs | read-only | current | This attribute counts represents the number of upstream packets received on the SIDs assigned to a CM that are any of the following: Upstream IPv4 ARP Requests… |
| 1.3.6.1.4.1.4491.2.1.20.1.3.1.16 | ColumndocsIf3CmtsCmRegStatusEnergyMgtEnabled | read-only | current | This attribute indicates which, if any, of the Energy Management Features are enabled for this CM. If this attribute returns the em1x1Mode(0) bit set, the CM i… |
| 1.3.6.1.4.1.4491.2.1.20.1.3.1.17 | ColumndocsIf3CmtsCmRegStatusEnergyMgtOperStatus | read-only | current | This attribute indicates whether the CM is currently operating in an Energy Management Mode. If this attribute returns the em1x1Mode(0) bit set, the CM is oper… |
| 1.3.6.1.4.1.4491.2.1.20.1.4 | TabledocsIf3CmtsCmUsStatusTable | not-accessible | current | This object defines status information of the CM currently in use Upstream Logical Channels, as reported by the CMTS. |
| 1.3.6.1.4.1.4491.2.1.20.1.4.1 | RowdocsIf3CmtsCmUsStatusEntry | not-accessible | current | The conceptual row of docsIf3CmtsCmUsStatusTable. |
| 1.3.6.1.4.1.4491.2.1.20.1.4.1.1 | ColumndocsIf3CmtsCmUsStatusChIfIndex | not-accessible | current | This attribute is a key that represents the ifIndex of the upstream interface. |
| 1.3.6.1.4.1.4491.2.1.20.1.4.1.2 | ColumndocsIf3CmtsCmUsStatusModulationType | read-only | current | This attribute represents the modulation type currently used by this upstream channel. |
| 1.3.6.1.4.1.4491.2.1.20.1.4.1.3 | ColumndocsIf3CmtsCmUsStatusRxPower | read-only | current | This attribute represents the receive power of this upstream channel. |
| 1.3.6.1.4.1.4491.2.1.20.1.4.1.4 | ColumndocsIf3CmtsCmUsStatusSignalNoise | read-only | current | This attribute represents Signal/Noise ratio as perceived for upstream data from the CM on this upstream channel. |
| 1.3.6.1.4.1.4491.2.1.20.1.4.1.5 | ColumndocsIf3CmtsCmUsStatusMicroreflections | read-only | current | This attribute represents microreflections received on this upstream channel. |
| 1.3.6.1.4.1.4491.2.1.20.1.4.1.6 | ColumndocsIf3CmtsCmUsStatusEqData | read-only | current | This attribute represents the equalization data for the CM on this upstream channel. |
| 1.3.6.1.4.1.4491.2.1.20.1.4.1.7 | ColumndocsIf3CmtsCmUsStatusUnerroreds | read-only | current | This attribute represents the codewords received without error from the CM on this interface. Discontinuities in the value of this counter can occur at re-init… |
| 1.3.6.1.4.1.4491.2.1.20.1.4.1.8 | ColumndocsIf3CmtsCmUsStatusCorrecteds | read-only | current | This attribute represents the codewords received with correctable errors from the CM on this upstream channel. Discontinuities in the value of this counter can… |
| 1.3.6.1.4.1.4491.2.1.20.1.4.1.9 | ColumndocsIf3CmtsCmUsStatusUncorrectables | read-only | current | This attribute represents the codewords received with uncorrectable errors from the CM on this upstream channel. Discontinuities in the value of this counter c… |
| 1.3.6.1.4.1.4491.2.1.20.1.4.1.10 | ColumndocsIf3CmtsCmUsStatusHighResolutionTimingOffset | read-only | current | This attribute represents the current measured round trip time on this CM's upstream channel in units of (6.25 microseconds/(64*256)). This attribute returns z… |
| 1.3.6.1.4.1.4491.2.1.20.1.4.1.11 | ColumndocsIf3CmtsCmUsStatusIsMuted | read-only | current | This attribute has a value 'true' to indicate that the CM's upstream channel has been muted via CM-CTRL-REQ/CM-CTRL-RSP message exchange. |
| 1.3.6.1.4.1.4491.2.1.20.1.4.1.12 | ColumndocsIf3CmtsCmUsStatusRangingStatus | read-only | current | This attribute denotes the ranging state of the CM. |
| 1.3.6.1.4.1.4491.2.1.20.1.5 | TabledocsIf3MdChCfgTable | not-accessible | current | This object configures the association of downstream and upstream channels to a particular MAC Domain (MD) on a CMTS. The creation of channels and MAC domain o… |
| 1.3.6.1.4.1.4491.2.1.20.1.5.1 | RowdocsIf3MdChCfgEntry | not-accessible | current | The conceptual row of docsIf3MdChCfgTable. The ifIndex key corresponds to the MAC Domain interface where the channel is configured. The CMTS persists all insta… |
| 1.3.6.1.4.1.4491.2.1.20.1.5.1.1 | ColumndocsIf3MdChCfgChIfIndex | not-accessible | current | This key represents the interface index of an existing upstream or downstream channel that is configured to be part of the MAC Domain. For the case of upstream… |
| 1.3.6.1.4.1.4491.2.1.20.1.5.1.2 | ColumndocsIf3MdChCfgIsPriCapableDs | read-create | current | If set to 'true', this attribute configures the downstream channel as Primary-Capable. The default value for a downstream channel is 'true'. This attribute is … |
| 1.3.6.1.4.1.4491.2.1.20.1.5.1.3 | ColumndocsIf3MdChCfgChId | read-create | current | This attribute contains the 8-bit Downstream Channel ID (DCID) or Upstream Channel ID (UCID) configured for the channel in the MAC Domain. |
| 1.3.6.1.4.1.4491.2.1.20.1.5.1.4 | ColumndocsIf3MdChCfgSfProvAttrMask | read-create | current | This attribute contains Provisioned Attribute Mask of non-bonded service flow assignment to this channel. |
| 1.3.6.1.4.1.4491.2.1.20.1.5.1.5 | ColumndocsIf3MdChCfgRowStatus | read-create | current | The status of this instance. |
| 1.3.6.1.4.1.4491.2.1.20.1.6 | TabledocsIf3RccCfgTable | not-accessible | current | This object identifies the scope of the Receive Channel Configuration (RCC) and provides a top level container for the Receive Module and Receive Channel objec… |
| 1.3.6.1.4.1.4491.2.1.20.1.6.1 | RowdocsIf3RccCfgEntry | not-accessible | current | The conceptual row of docsIf3RccCfgTable. The ifIndex key corresponds to the MAC Domain interface where the RCC is configured. The CMTS persists all instances … |
| 1.3.6.1.4.1.4491.2.1.20.1.6.1.1 | ColumndocsIf3RccCfgRcpId | not-accessible | current | This key represents the 'Receive Channel Profile Identifier' (RCP-ID) configured for the MAC Domain indicated by this instance. |
| 1.3.6.1.4.1.4491.2.1.20.1.6.1.2 | ColumndocsIf3RccCfgRccCfgId | not-accessible | current | This key denotes an RCC combination assignment for a particular RcpId and is unique per combination of MAC Domain and RcpId. |
| 1.3.6.1.4.1.4491.2.1.20.1.6.1.3 | ColumndocsIf3RccCfgVendorSpecific | read-create | current | This attribute contains vendor-specific information of the CM Receive Channel configuration. |
| 1.3.6.1.4.1.4491.2.1.20.1.6.1.4 | ColumndocsIf3RccCfgDescription | read-create | current | This attribute contains a human-readable description of the CM RCP Configuration. |
| 1.3.6.1.4.1.4491.2.1.20.1.6.1.5 | ColumndocsIf3RccCfgRowStatus | read-create | current | The status of this instance. |
| 1.3.6.1.4.1.4491.2.1.20.1.7 | TabledocsIf3RccStatusTable | not-accessible | current | The RCC Status object provides a read-only view of the statically-configured (from the RccCfg object) and dynamically-created RCCs. The CMTS creates an RCC Sta… |
| 1.3.6.1.4.1.4491.2.1.20.1.7.1 | RowdocsIf3RccStatusEntry | not-accessible | current | The conceptual row of docsIf3RccStatusTable. The ifIndex key corresponds to the MAC Domain interface where the RCC is configured. |
| 1.3.6.1.4.1.4491.2.1.20.1.7.1.1 | ColumndocsIf3RccStatusRcpId | not-accessible | current | This key represents the RCP-ID to which this instance applies. |
| 1.3.6.1.4.1.4491.2.1.20.1.7.1.2 | ColumndocsIf3RccStatusRccStatusId | not-accessible | current | This key represents an RCC combination for a particular RcpId either from an RCC configuration object or a CMTS-determined RCC and is unique per combination of… |
| 1.3.6.1.4.1.4491.2.1.20.1.7.1.3 | ColumndocsIf3RccStatusRccCfgId | read-only | current | This attribute identifies an RCC-Configured combination from which this instance was defined. If nonzero, it corresponds to the RccCfg instance from which the … |
| 1.3.6.1.4.1.4491.2.1.20.1.7.1.4 | ColumndocsIf3RccStatusValidityCode | read-only | current | This attribute indicates whether the RCC instance of this object is valid or not. An RCC Status instance from a configured or a dynamic RCC could become invali… |
| 1.3.6.1.4.1.4491.2.1.20.1.7.1.5 | ColumndocsIf3RccStatusValidityCodeText | read-only | current | This attribute contains the CMTS vendor-specific log information from the Receive Channel Configuration Status encoding. |
| 1.3.6.1.4.1.4491.2.1.20.1.8 | TabledocsIf3RxChCfgTable | not-accessible | current | The Receive Channel Configuration object permits an operator to configure how CMs registered with certain Receive Channel Profiles will configure the Receive C… |
| 1.3.6.1.4.1.4491.2.1.20.1.8.1 | RowdocsIf3RxChCfgEntry | not-accessible | current | The conceptual row of docsIf3RxChCfgTable. The ifIndex key corresponds to the MAC Domain interface where the RCC is configured. The CMTS persists all instances… |
| 1.3.6.1.4.1.4491.2.1.20.1.8.1.1 | ColumndocsIf3RxChCfgRcId | not-accessible | current | This key represents an identifier for the parameters of the Receive Channel instance within the Receive Channel Profile. |
| 1.3.6.1.4.1.4491.2.1.20.1.8.1.2 | ColumndocsIf3RxChCfgChIfIndex | read-create | current | This attribute contains the interface index of a Downstream Channel that this Receive Channel Instance defines. |
| 1.3.6.1.4.1.4491.2.1.20.1.8.1.3 | ColumndocsIf3RxChCfgPrimaryDsIndicator | read-create | current | If set to 'true', this attribute indicates the Receive Channel is to be the primary-capable downstream channel for the CM receiving this RCC. Otherwise, the do… |
| 1.3.6.1.4.1.4491.2.1.20.1.8.1.4 | ColumndocsIf3RxChCfgRcRmConnectivityId | read-create | current | This attribute indicates the Receive Module (via the RmId from the ReceiveModule object) to which this Receive Channel connects. If this object contains a zero… |
| 1.3.6.1.4.1.4491.2.1.20.1.8.1.5 | ColumndocsIf3RxChCfgRowStatus | read-create | current | The status of this instance. |
| 1.3.6.1.4.1.4491.2.1.20.1.9 | TabledocsIf3RxChStatusTable | not-accessible | current | The Receive Channel Status object reports the status of the statically-configured and dynamically-created Receive Channels within an RCC. |
| 1.3.6.1.4.1.4491.2.1.20.1.9.1 | RowdocsIf3RxChStatusEntry | not-accessible | current | The conceptual row of docsIf3RxChStatusTable. The ifIndex key corresponds to the MAC Domain interface where the RCC is configured. When this object is defined … |
| 1.3.6.1.4.1.4491.2.1.20.1.9.1.1 | ColumndocsIf3RxChStatusRcId | not-accessible | current | This key represents an identifier for the parameters of the Receive Channel instance within the Receive Channel Profile. |
| 1.3.6.1.4.1.4491.2.1.20.1.9.1.2 | ColumndocsIf3RxChStatusChIfIndex | read-only | current | This attribute contains the interface index of the Downstream Channel that this Receive Channel Instance defines. |
| 1.3.6.1.4.1.4491.2.1.20.1.9.1.3 | ColumndocsIf3RxChStatusPrimaryDsIndicator | read-only | current | If set to 'true', this attribute indicates the Receive Channel is to be the primary-capable downstream channel for the CM receiving this RCC. Otherwise, the do… |
| 1.3.6.1.4.1.4491.2.1.20.1.9.1.4 | ColumndocsIf3RxChStatusRcRmConnectivityId | read-only | current | This attribute identifies the Receive Module to which this Receive Channel connects. A value a zero indicates that the Receive Channel Connectivity TLV is omit… |
| 1.3.6.1.4.1.4491.2.1.20.1.10 | TabledocsIf3RxModuleCfgTable | not-accessible | current | The Receive Module Configuration object permits an operator to configure how CMs with certain Receive Channel Profiles (RCPs) will configure the Receive Module… |
| 1.3.6.1.4.1.4491.2.1.20.1.10.1 | RowdocsIf3RxModuleCfgEntry | not-accessible | current | The conceptual row of docsIf3RxModuleCfgTable. The ifIndex key corresponds to the MAC Domain interface where the RCC is configured. |
| 1.3.6.1.4.1.4491.2.1.20.1.10.1.1 | ColumndocsIf3RxModuleCfgRmId | not-accessible | current | This key represents an identifier of a Receive Module instance within the Receive Channel Profile. |
| 1.3.6.1.4.1.4491.2.1.20.1.10.1.2 | ColumndocsIf3RxModuleCfgRmRmConnectivityId | read-create | current | This attribute represents the higher level (i.e. closer to RF) Receive Module to which this Receive Module connects. If this object contains a zero value (and … |
| 1.3.6.1.4.1.4491.2.1.20.1.10.1.3 | ColumndocsIf3RxModuleCfgFirstCenterFrequency | read-create | current | This attribute represents the center frequency, in Hz, and a multiple of 62500, that indicates the lowest frequency channel of the Receive Module, or 0 if not … |
| 1.3.6.1.4.1.4491.2.1.20.1.10.1.4 | ColumndocsIf3RxModuleCfgRowStatus | read-create | current | The status of this instance. |
| 1.3.6.1.4.1.4491.2.1.20.1.11 | TabledocsIf3RxModuleStatusTable | not-accessible | current | The Receive Module Status object provides a read-only view of the statically configured and dynamically created Receive Modules within an RCC. |
| 1.3.6.1.4.1.4491.2.1.20.1.11.1 | RowdocsIf3RxModuleStatusEntry | not-accessible | current | The conceptual row of docsIf3RxModuleStatusTable. The ifIndex key corresponds to the MAC Domain interface where the RCC is configured. When this object is defi… |
| 1.3.6.1.4.1.4491.2.1.20.1.11.1.1 | ColumndocsIf3RxModuleStatusRmId | not-accessible | current | This key represents an identifier of a Receive Module instance within the Receive Channel Profile. |
| 1.3.6.1.4.1.4491.2.1.20.1.11.1.2 | ColumndocsIf3RxModuleStatusRmRmConnectivityId | read-only | current | This attribute represents the Receive Module to which this Receive Module connects. Requirements for module connectivity are detailed in the RmRmConnectivityId… |
| 1.3.6.1.4.1.4491.2.1.20.1.11.1.3 | ColumndocsIf3RxModuleStatusFirstCenterFrequency | read-only | current | This attribute represents the low frequency channel of the Receive Module, or 0 if not applicable to the Receive Module. |
| 1.3.6.1.4.1.4491.2.1.20.1.12 | TabledocsIf3MdNodeStatusTable | not-accessible | current | This object reports the MD-DS-SG-ID and MD-US-SG-ID associated with a MD-CM-SG-ID within a MAC Domain and the Fiber Nodes reached by the MD-CM-SG. |
| 1.3.6.1.4.1.4491.2.1.20.1.12.1 | RowdocsIf3MdNodeStatusEntry | not-accessible | current | The conceptual row of docsIf3MdNodeStatusTable. The ifIndex key corresponds to the MAC Domain interface where the MD-CM-SG-ID is configured. |
| 1.3.6.1.4.1.4491.2.1.20.1.12.1.1 | ColumndocsIf3MdNodeStatusNodeName | not-accessible | current | This key represents the name of a fiber node associated with a MD-CM-SG of a MAC Domain. |
| 1.3.6.1.4.1.4491.2.1.20.1.12.1.2 | ColumndocsIf3MdNodeStatusMdCmSgId | not-accessible | current | This attribute is a key and indicates the MD-CM-SG-ID of this instance. A particular MdCmSgId in a MAC Domain is associated with one or more Fiber Nodes. |
| 1.3.6.1.4.1.4491.2.1.20.1.12.1.3 | ColumndocsIf3MdNodeStatusMdDsSgId | read-only | current | This attribute corresponds to the MD-DS-SG-ID of the MD-CM-SG of this object instance. The MdDsSgId values are unique within a MAC Domain. |
| 1.3.6.1.4.1.4491.2.1.20.1.12.1.4 | ColumndocsIf3MdNodeStatusMdUsSgId | read-only | current | This attribute corresponds to the MD-US-SG-ID of the MD-CM-SG of this object instance. The MdUsSgId values are unique within a MAC Domain. |
| 1.3.6.1.4.1.4491.2.1.20.1.13 | TabledocsIf3MdDsSgStatusTable | not-accessible | current | This object returns the list of downstream channel associated with a MAC Domain MD-DS-SG-ID. |
| 1.3.6.1.4.1.4491.2.1.20.1.13.1 | RowdocsIf3MdDsSgStatusEntry | not-accessible | current | The conceptual row of docsIf3MdDsSgStatusTable. The ifIndex key corresponds to the MAC Domain interface where the MD-DS-SG-ID is configured. The CMTS is not re… |
| 1.3.6.1.4.1.4491.2.1.20.1.13.1.1 | ColumndocsIf3MdDsSgStatusMdDsSgId | not-accessible | current | This key represents a MD-DS-SG-ID in a Mac Domain. |
| 1.3.6.1.4.1.4491.2.1.20.1.13.1.2 | ColumndocsIf3MdDsSgStatusChSetId | read-only | current | This attribute represents a reference to the list of downstream channels of the MD-DS-SG-ID. |
| 1.3.6.1.4.1.4491.2.1.20.1.14 | TabledocsIf3MdUsSgStatusTable | not-accessible | current | This object returns the list of upstream channels associated with a MAC Domain MD-US-SG-ID. |
| 1.3.6.1.4.1.4491.2.1.20.1.14.1 | RowdocsIf3MdUsSgStatusEntry | not-accessible | current | The conceptual row of docsIf3MdUsSgStatusTable. The ifIndex key corresponds to the MAC Domain interface where the MD-DS-SG-ID is configured. The CMTS is not re… |
| 1.3.6.1.4.1.4491.2.1.20.1.14.1.1 | ColumndocsIf3MdUsSgStatusMdUsSgId | not-accessible | current | This key represents a MD-US-SG-ID in a Mac Domain. |
| 1.3.6.1.4.1.4491.2.1.20.1.14.1.2 | ColumndocsIf3MdUsSgStatusChSetId | read-only | current | This attribute represents a reference to the list of upstream channels of the MD-US-SG-ID. |
| 1.3.6.1.4.1.4491.2.1.20.1.15 | TabledocsIf3MdUsToDsChMappingTable | not-accessible | current | This object returns the set of downstream channels that carry UCDs and MAPs for a particular upstream channel in a MAC Domain. |
| 1.3.6.1.4.1.4491.2.1.20.1.15.1 | RowdocsIf3MdUsToDsChMappingEntry | not-accessible | current | The conceptual row of docsIf3MdUsToDsChMappingTable. |
| 1.3.6.1.4.1.4491.2.1.20.1.15.1.1 | ColumndocsIf3MdUsToDsChMappingUsIfIndex | not-accessible | current | This key represents the interface index of the upstream channel to which this instance applies. |
| 1.3.6.1.4.1.4491.2.1.20.1.15.1.2 | ColumndocsIf3MdUsToDsChMappingDsIfIndex | not-accessible | current | This key represents the interface index of a downstream channel carrying in UCDs and Maps associated with the upstream channel defined by this instance. |
| 1.3.6.1.4.1.4491.2.1.20.1.15.1.3 | ColumndocsIf3MdUsToDsChMappingMdIfIndex | read-only | current | This key represents the MAC domain of the upstream and downstream channels of this instance. |
| 1.3.6.1.4.1.4491.2.1.20.1.16 | TabledocsIf3MdCfgTable | not-accessible | current | This object contains MAC domain level control and configuration attributes. |
| 1.3.6.1.4.1.4491.2.1.20.1.16.1 | RowdocsIf3MdCfgEntry | not-accessible | current | The conceptual row of docsIf3MdCfgTable. The CMTS persists all instances of MdCfg across reinitializations. The ifIndex key corresponds to the MAC Domain inter… |
| 1.3.6.1.4.1.4491.2.1.20.1.16.1.1 | ColumndocsIf3MdCfgMddInterval | read-write | current | This attribute configures the interval for the insertion of MDD messages in each downstream channel of a MAC Domain. |
| 1.3.6.1.4.1.4491.2.1.20.1.16.1.2 | ColumndocsIf3MdCfgIpProvMode | read-write | current | This attribute configures the CMTS IP provisioning mode for a MAC Domain. When this attribute is set to 'ipv4Only' the CM will acquire a single IPv4 address fo… |
| 1.3.6.1.4.1.4491.2.1.20.1.16.1.3 | ColumndocsIf3MdCfgCmStatusEvCtlEnabled | read-write | current | If set to 'true', this attribute enables the signaling of the CM-Status Event reporting mechanism. |
| 1.3.6.1.4.1.4491.2.1.20.1.16.1.4 | ColumndocsIf3MdCfgUsFreqRange | read-write | current | This attribute indicates in MDD messages the upstream frequency upper band edge of an upstream Channel. A value 'standard' means Standard Frequency Range and a… |
| 1.3.6.1.4.1.4491.2.1.20.1.16.1.5 | ColumndocsIf3MdCfgMcastDsidFwdEnabled | read-write | current | If set to 'true', this attribute enables the CMTS to use IP Multicast DSID Forwarding (MDF) for the MAC domain. |
| 1.3.6.1.4.1.4491.2.1.20.1.16.1.6 | ColumndocsIf3MdCfgMultRxChModeEnabled | read-write | current | If set to 'true', this attribute enables Downstream Channel Bonding for the MAC Domain. |
| 1.3.6.1.4.1.4491.2.1.20.1.16.1.7 | ColumndocsIf3MdCfgMultTxChModeEnabled | read-write | current | If set to 'true', this attribute enables Multiple Transmit Channel (MTC) Mode for the MAC Domain. |
| 1.3.6.1.4.1.4491.2.1.20.1.16.1.8 | ColumndocsIf3MdCfgEarlyAuthEncrCtrl | read-write | current | This attribute enables or disables early authentication and encryption (EAE) signaling for the MAC Domain. It also defines the type of EAE enforcement in the c… |
| 1.3.6.1.4.1.4491.2.1.20.1.16.1.9 | ColumndocsIf3MdCfgTftpProxyEnabled | read-write | current | If set to 'true', this attribute enables TFTP Proxy functionality for the MAC Domain. |
| 1.3.6.1.4.1.4491.2.1.20.1.16.1.10 | ColumndocsIf3MdCfgSrcAddrVerifEnabled | read-write | current | If set to 'true', this attribute enables Source Address Verification (SAV) functionality for the MAC Domain. |
| 1.3.6.1.4.1.4491.2.1.20.1.16.1.11 | ColumndocsIf3MdCfgDownChannelAnnex | read-only | current | This attribute defines the ITU-J-83 Annex being used for this MAC Domain. The value of this attribute indicates the conformance of the implementation to import… |
| 1.3.6.1.4.1.4491.2.1.20.1.16.1.12 | ColumndocsIf3MdCfgCmUdcEnabled | read-write | current | If set to 'true', this attribute instructs the CMTS MAC Domain to enable Upstream Drop Classifiers (UDC) for the CMs attempting registration in this MAC Domain. |
| 1.3.6.1.4.1.4491.2.1.20.1.16.1.13 | ColumndocsIf3MdCfgSendUdcRulesEnabled | read-write | current | If set to 'true' and when the CM signals to the CMTS 'Upstream Drop Classifier Group ID' encodings, this attribute instructs the CMTS MAC Domain to send the Su… |
| 1.3.6.1.4.1.4491.2.1.20.1.16.1.14 | ColumndocsIf3MdCfgServiceTypeIdList | read-write | current | This attribute indicates the list of Service Type IDs associated with the MAC Domain. During the CM registration process the CMTS will attempt to redirect the … |
| 1.3.6.1.4.1.4491.2.1.20.1.16.1.15 | ColumndocsIf3MdCfgBpi2EnforceCtrl | read-write | current | This attribute indicates the level of BPI+ enforcement policies with the MAC Domain. The following BPI+ enforcement policies are defined in the case where BPI+… |
| 1.3.6.1.4.1.4491.2.1.20.1.16.1.16 | ColumndocsIf3MdCfgEnergyMgt1x1Enabled | read-write | current | This attribute indicates whether the CMTS is configured for 1x1 Energy Management Mode of operation on a per MAC Domain basis. If this attribute is set to 'tru… |
| 1.3.6.1.4.1.4491.2.1.20.1.17 | TabledocsIf3BondingGrpCfgTable | not-accessible | current | This object defines statically configured Downstream Bonding Groups and Upstream Bonding Groups on the CMTS. This object supports the creation and deletion of … |
| 1.3.6.1.4.1.4491.2.1.20.1.17.1 | RowdocsIf3BondingGrpCfgEntry | not-accessible | current | The conceptual row of docsIf3BondingGrpCfgTable. The ifIndex key corresponds to the MAC Domain interface where the Bonding Group is configured. The CMTS persis… |
| 1.3.6.1.4.1.4491.2.1.20.1.17.1.1 | ColumndocsIf3BondingGrpCfgDir | not-accessible | current | This attribute defines the ordered list of channels that comprise the channel set |
| 1.3.6.1.4.1.4491.2.1.20.1.17.1.2 | ColumndocsIf3BondingGrpCfgCfgId | not-accessible | current | This key represents the configured bonding group identifier in the indicated direction for the MAC Domain. This attribute is used for the sole purpose of track… |
| 1.3.6.1.4.1.4491.2.1.20.1.17.1.3 | ColumndocsIf3BondingGrpCfgChList | read-create | current | This attribute contains the list of channels of the bonding group. |
| 1.3.6.1.4.1.4491.2.1.20.1.17.1.4 | ColumndocsIf3BondingGrpCfgSfProvAttrMask | read-create | current | This attribute represents the Provisioned Attribute Mask encoding for the bonding group. |
| 1.3.6.1.4.1.4491.2.1.20.1.17.1.5 | ColumndocsIf3BondingGrpCfgDsidReseqWaitTime | read-create | current | For a Downstream Bonding Group, this attribute provides the DSID Resequencing Wait Time that is to be used for all DSIDs associated with this Downstream Bondin… |
| 1.3.6.1.4.1.4491.2.1.20.1.17.1.6 | ColumndocsIf3BondingGrpCfgDsidReseqWarnThrshld | read-create | current | For a Downstream Bonding Group, this attribute provides the DSID Resequencing Warning Threshold that is to be used for all DSIDs associated with this Downstrea… |
| 1.3.6.1.4.1.4491.2.1.20.1.17.1.7 | ColumndocsIf3BondingGrpCfgRowStatus | read-create | current | The status of this instance. |
| 1.3.6.1.4.1.4491.2.1.20.1.18 | TabledocsIf3DsBondingGrpStatusTable | not-accessible | current | This object returns administratively-configured and CMTS defined downstream bonding groups. |
| 1.3.6.1.4.1.4491.2.1.20.1.18.1 | RowdocsIf3DsBondingGrpStatusEntry | not-accessible | current | The conceptual row of docsIf3DsBondingGrpStatusTable. The ifIndex key corresponds to the MAC Domain interface where the Bonding Group is configured. |
| 1.3.6.1.4.1.4491.2.1.20.1.18.1.1 | ColumndocsIf3DsBondingGrpStatusChSetId | not-accessible | current | This key represents the identifier for the Downstream Bonding Group or the single-downstream channel of this instance. |
| 1.3.6.1.4.1.4491.2.1.20.1.18.1.2 | ColumndocsIf3DsBondingGrpStatusMdDsSgId | read-only | current | This attribute corresponds to the MD-DS-SG-ID that includes all the downstream channels of the Downstream Bonding Group. The value zero indicates that the bond… |
| 1.3.6.1.4.1.4491.2.1.20.1.18.1.3 | ColumndocsIf3DsBondingGrpStatusCfgId | read-only | current | This attribute provides the BondingGrpCfgId for the downstream bonding group if it was configured. Otherwise, the zero value indicates that the CMTS will defin… |
| 1.3.6.1.4.1.4491.2.1.20.1.19 | TabledocsIf3UsBondingGrpStatusTable | not-accessible | current | This object returns administratively-configured and CMTS-defined upstream bonding groups. |
| 1.3.6.1.4.1.4491.2.1.20.1.19.1 | RowdocsIf3UsBondingGrpStatusEntry | not-accessible | current | The conceptual row of docsIf3UsBondingGrpStatusTable. The ifIndex key corresponds to the MAC Domain interface where the Bonding Group is configured. |
| 1.3.6.1.4.1.4491.2.1.20.1.19.1.1 | ColumndocsIf3UsBondingGrpStatusChSetId | not-accessible | current | This key represents the identifier for the Upstream Bonding Group or the single-upstream channel of this instance. |
| 1.3.6.1.4.1.4491.2.1.20.1.19.1.2 | ColumndocsIf3UsBondingGrpStatusMdUsSgId | read-only | current | This attribute corresponds to the MD-US-SG-ID that includes all the upstream channels of the Upstream Bonding Group. The value zero indicates that the bonding … |
| 1.3.6.1.4.1.4491.2.1.20.1.19.1.3 | ColumndocsIf3UsBondingGrpStatusCfgId | read-only | current | This attribute provides the BondingGrpCfgId for the upstream bonding group if it was configured. Otherwise, the zero value indicates that the CMTS defines the … |
| 1.3.6.1.4.1.4491.2.1.20.1.20 | TabledocsIf3UsChExtTable | not-accessible | current | This object defines management extensions for upstream channels, in particular SCDMA parameters. |
| 1.3.6.1.4.1.4491.2.1.20.1.20.1 | RowdocsIf3UsChExtEntry | not-accessible | current | The conceptual row of docsIf3UsChExtTable. The ifIndex key corresponds to each of the upstream channels. |
| 1.3.6.1.4.1.4491.2.1.20.1.20.1.1 | ColumndocsIf3UsChExtSacCodeHoppingSelectionMode | read-only | current | This attribute indicates the selection mode for active codes and code hopping. 'none' Non-SCDMA channel 'sac1NoCodeHopping' Selectable active codes mode 1 and … |
| 1.3.6.1.4.1.4491.2.1.20.1.20.1.2 | ColumndocsIf3UsChExtScdmaSelectionStringActiveCodes | read-only | current | This attribute represents the active codes of the upstream channel and it is applicable only when SacCodeHoppingSelectionMode is 'sac2CodeHoppingMode2. |
| 1.3.6.1.4.1.4491.2.1.20.1.21 | NodedocsIf3CmCapabilities | |||
| 1.3.6.1.4.1.4491.2.1.20.1.21.1 | ScalardocsIf3CmCapabilitiesReq | read-only | current | This attribute contains the TLV encoding for TLV-5 sent in a REG-REQ. The first byte of this encoding is expected to be '05'H. |
| 1.3.6.1.4.1.4491.2.1.20.1.21.2 | ScalardocsIf3CmCapabilitiesRsp | read-only | current | This attribute contains the TLV encoding for TLV-5 received in a REG-RSP. The first byte of this encoding is expected to be '05'H. |
| 1.3.6.1.4.1.4491.2.1.20.1.22 | TabledocsIf3UsChSetTable | not-accessible | current | This object defines a set of upstream channels. These channel sets may be associated with channel bonding groups, MD-US-SGs, MD-CM-SGs, or any other channel se… |
| 1.3.6.1.4.1.4491.2.1.20.1.22.1 | RowdocsIf3UsChSetEntry | not-accessible | current | The conceptual row of docsIf3UsChSetTable. The ifIndex key corresponds to the MAC Domain interface where the upstream channel set is defined. |
| 1.3.6.1.4.1.4491.2.1.20.1.22.1.1 | ColumndocsIf3UsChSetId | not-accessible | current | This key defines a reference identifier for the upstream channel set within the MAC Domain. |
| 1.3.6.1.4.1.4491.2.1.20.1.22.1.2 | ColumndocsIf3UsChSetChList | read-only | current | This attribute defines the ordered list of channels that comprise the upstream channel set |
| 1.3.6.1.4.1.4491.2.1.20.1.23 | TabledocsIf3DsChSetTable | not-accessible | current | This object defines a set of downstream channels. These channel sets may be associated with channel bonding groups, MD-DS-SGs, MD-CM-SGs, or any other channel … |
| 1.3.6.1.4.1.4491.2.1.20.1.23.1 | RowdocsIf3DsChSetEntry | not-accessible | current | The conceptual row of docsIf3DsChSetTable. The ifIndex key corresponds to the MAC Domain interface where the downstream channel set is defined. |
| 1.3.6.1.4.1.4491.2.1.20.1.23.1.1 | ColumndocsIf3DsChSetId | not-accessible | current | This key defines a reference identifier for the downstream channel set within the MAC Domain. |
| 1.3.6.1.4.1.4491.2.1.20.1.23.1.2 | ColumndocsIf3DsChSetChList | read-only | current | This attribute defines the ordered list of channels that comprise the downstream channel set. |
| 1.3.6.1.4.1.4491.2.1.20.1.24 | TabledocsIf3SignalQualityExtTable | not-accessible | current | This object provides an in-channel received modulation error ratio metric for CM and CMTS. |
| 1.3.6.1.4.1.4491.2.1.20.1.24.1 | RowdocsIf3SignalQualityExtEntry | not-accessible | current | The conceptual row of docsIf3SignalQualityExtTable. At the CM, this object describes the received modulation error ratio of each downstream channel. At the CMT… |
| 1.3.6.1.4.1.4491.2.1.20.1.24.1.1 | ColumndocsIf3SignalQualityExtRxMER | read-only | current | RxMER provides an in-channel received Modulation Error Ratio (MER). RxMER is defined as an estimate, provided by the demodulator, of the ratio: (average conste… |
| 1.3.6.1.4.1.4491.2.1.20.1.24.1.2 | ColumndocsIf3SignalQualityExtRxMerSamples | read-only | current | RxMerSamples is a statistically significant number of symbols for the CM, or bursts for the CMTS, processed to arrive at the RxMER value. For the CMTS, the MER… |
| 1.3.6.1.4.1.4491.2.1.20.1.25 | TabledocsIf3CmtsSignalQualityExtTable | not-accessible | current | This object provides metrics and parameters associated with received carrier, noise and interference power levels in the upstream channels of the CMTS. |
| 1.3.6.1.4.1.4491.2.1.20.1.25.1 | RowdocsIf3CmtsSignalQualityExtEntry | not-accessible | current | The conceptual row of docsIf3CmtsSignalQualityExtTable. The ifIndex key corresponds to each of the upstream channels. The CMTS persists the configured values o… |
| 1.3.6.1.4.1.4491.2.1.20.1.25.1.1 | ColumndocsIf3CmtsSignalQualityExtCNIR | read-only | current | This attribute provides an upstream in-channel Carrier-to-Noise plus Interference Ratio (CNIR). CNIR is defined as the ratio of the expected commanded received… |
| 1.3.6.1.4.1.4491.2.1.20.1.25.1.2 | ColumndocsIf3CmtsSignalQualityExtExpectedRxSignalPower | read-write | current | ExpectedReceivedSignalPower is the power of the expected commanded received signal in the channel, referenced to the CMTS input. |
| 1.3.6.1.4.1.4491.2.1.20.1.26 | TabledocsIf3CmtsSpectrumAnalysisMeasTable | not-accessible | current | This object is used to configure the logical upstream interfaces to perform the spectrum measurements. This object supports creation and deletion of instances. |
| 1.3.6.1.4.1.4491.2.1.20.1.26.1 | RowdocsIf3CmtsSpectrumAnalysisMeasEntry | not-accessible | current | The conceptual row of docsIf3CmtsSpectrumAnalysisMeasTable. The ifIndex key corresponds to each of the upstream channels. The CMTS is not required to persist i… |
| 1.3.6.1.4.1.4491.2.1.20.1.26.1.1 | ColumndocsIf3CmtsSpectrumAnalysisMeasAmplitudeData | read-only | current | This attribute provides a list of the spectral amplitudes corresponding to the frequency bins ordered from lowest to highest frequencies covering the frequency… |
| 1.3.6.1.4.1.4491.2.1.20.1.26.1.2 | ColumndocsIf3CmtsSpectrumAnalysisMeasTimeInterval | read-only | current | TimeInterval is the CMTS estimated average repetition period of measurements. This attribute defines the average rate at which new spectra can be retrieved. |
| 1.3.6.1.4.1.4491.2.1.20.1.26.1.3 | ColumndocsIf3CmtsSpectrumAnalysisMeasRowStatus | read-create | current | The status of this instance. |
| 1.3.6.1.4.1.4491.2.1.20.1.27 | NodedocsIf3CmtsCmCtrl | |||
| 1.3.6.1.4.1.4491.2.1.20.1.27.1 | ScalardocsIf3CmtsCmCtrlCmdMacAddr | read-write | current | This attribute represents the MAC Address of the CM which the CMTS is instructed to send the CM-CTRL-REQ message. |
| 1.3.6.1.4.1.4491.2.1.20.1.27.2 | ScalardocsIf3CmtsCmCtrlCmdMuteUsChId | read-write | current | This attribute represents the Upstream Channel ID (UCID) to mute or unmute. A value of zero indicates all upstream channels. This attribute is only applicable … |
| 1.3.6.1.4.1.4491.2.1.20.1.27.3 | ScalardocsIf3CmtsCmCtrlCmdMuteInterval | read-write | current | This attribute represents the length of time that the mute operation is in effect. This attribute is only applicable when the docsIf3CmtsCmCtrlCmdCommit attrib… |
| 1.3.6.1.4.1.4491.2.1.20.1.27.4 | ScalardocsIf3CmtsCmCtrlCmdDisableForwarding | read-write | current | When set to 'true', this attribute disables data forwarding to the CMCI when the docsIf3CmtsCmCtrlCmdCommit attribute is set to 'disableForwarding'. When set t… |
| 1.3.6.1.4.1.4491.2.1.20.1.27.5 | ScalardocsIf3CmtsCmCtrlCmdCommit | read-write | current | This attribute indicates the type of command for the CMTS to trigger in the CM-CTRL-REQ message. This attribute will return the value of the last operation per… |
| 1.3.6.1.4.1.4491.2.1.20.1.28 | TabledocsIf3CmDpvStatsTable | not-accessible | current | This object represents the DOCSIS Path Verify Statistics collected in the cable modem device. The CMTS controls the logging of DPV statistics in the cable mode… |
| 1.3.6.1.4.1.4491.2.1.20.1.28.1 | RowdocsIf3CmDpvStatsEntry | not-accessible | current | The conceptual row of docsIf3CmDpvStatsTable. |
| 1.3.6.1.4.1.4491.2.1.20.1.28.1.1 | ColumndocsIf3CmDpvStatsGrpId | not-accessible | current | This key represents the DPV Group ID. The CM reports two instance of DPV statistics per downstream normally referred as Statistical Group 1 and Statistical Gro… |
| 1.3.6.1.4.1.4491.2.1.20.1.28.1.2 | ColumndocsIf3CmDpvStatsLastMeasLatency | read-only | current | This attribute represents the last latency measurement for this statistical group. |
| 1.3.6.1.4.1.4491.2.1.20.1.28.1.3 | ColumndocsIf3CmDpvStatsLastMeasTime | read-only | current | This attribute represents the last measurement time of the last latency measurement for this statistical group. This attribute reports the EPOC time value when… |
| 1.3.6.1.4.1.4491.2.1.20.1.28.1.4 | ColumndocsIf3CmDpvStatsMinLatency | read-only | current | This attribute represents the minimum latency measurement for this statistical group since the last time statistics were cleared. |
| 1.3.6.1.4.1.4491.2.1.20.1.28.1.5 | ColumndocsIf3CmDpvStatsMaxLatency | read-only | current | This attribute represents the maximum latency measurement for this statistical group since the last time statistics were cleared. |
| 1.3.6.1.4.1.4491.2.1.20.1.28.1.6 | ColumndocsIf3CmDpvStatsAvgLatency | read-only | current | This attribute represents the average latency measurement for this statistical group since the last time statistics were cleared. The averaging mechanism is co… |
| 1.3.6.1.4.1.4491.2.1.20.1.28.1.7 | ColumndocsIf3CmDpvStatsNumMeas | read-only | current | This attribute represents the number of latency measurements made for this statistical group since the last time statistics were cleared. |
| 1.3.6.1.4.1.4491.2.1.20.1.28.1.8 | ColumndocsIf3CmDpvStatsLastClearTime | read-only | current | This attribute represents the last time statistics were cleared for this statistical group. |
| 1.3.6.1.4.1.4491.2.1.20.1.29 | TabledocsIf3CmEventCtrlTable | not-accessible | current | This object represents the control mechanism to enable the dispatching of events based on the event Id. The following rules define the event control behavior: … |
| 1.3.6.1.4.1.4491.2.1.20.1.29.1 | RowdocsIf3CmEventCtrlEntry | not-accessible | current | The conceptual row of docsIf3CmEventCtrlTable. |
| 1.3.6.1.4.1.4491.2.1.20.1.29.1.1 | ColumndocsIf3CmEventCtrlEventId | not-accessible | current | This key represents the Event ID of the event being enabled for delivery to a dispatch mechanism (e.g. syslog). |
| 1.3.6.1.4.1.4491.2.1.20.1.29.1.2 | ColumndocsIf3CmEventCtrlStatus | read-create | current | The status of this instance. |
| 1.3.6.1.4.1.4491.2.1.20.1.30 | TabledocsIf3CmtsEventCtrlTable | not-accessible | current | This object represents the control mechanism to enable the dispatching of events based on the event Id. The following rules define the event control behavior: … |
| 1.3.6.1.4.1.4491.2.1.20.1.30.1 | RowdocsIf3CmtsEventCtrlEntry | not-accessible | current | The conceptual row of docsIf3CmtsEventCtrlTable. |
| 1.3.6.1.4.1.4491.2.1.20.1.30.1.1 | ColumndocsIf3CmtsEventCtrlEventId | not-accessible | current | This key represents the Event ID of the event being enabled for delivery to a dispatch mechanism (e.g. syslog). |
| 1.3.6.1.4.1.4491.2.1.20.1.30.1.2 | ColumndocsIf3CmtsEventCtrlStatus | read-create | current | The status of this instance. |
| 1.3.6.1.4.1.4491.2.1.20.1.31 | TabledocsIf3CmMdCfgTable | not-accessible | current | This object contains CM MAC domain level control and configuration attributes. |
| 1.3.6.1.4.1.4491.2.1.20.1.31.1 | RowdocsIf3CmMdCfgEntry | not-accessible | current | The conceptual row of docsIf3CmMdCfgTable. The ifIndex key corresponds to the MAC Domain interface. |
| 1.3.6.1.4.1.4491.2.1.20.1.31.1.1 | ColumndocsIf3CmMdCfgIpProvMode | read-write | current | This attribute specifies whether the CM honors or ignores the CMTS MDD TLV 5.1 setting in order to configure its IP provisioning mode. The CM relies upon the t… |
| 1.3.6.1.4.1.4491.2.1.20.1.31.1.2 | ColumndocsIf3CmMdCfgIpProvModeResetOnChange | read-write | current | This attribute determines if the CM is to automatically reset upon change of the IpProvMode attribute. The attribute has a default value of 'false' (2) which m… |
| 1.3.6.1.4.1.4491.2.1.20.1.31.1.3 | ColumndocsIf3CmMdCfgIpProvModeResetOnChangeHoldOffTimer | read-write | current | This attribute determines how long a CM with IpProvModeResetOnChange set to 'true' waits to reset. When the IpProvModeResetOnChange attribute is set to 'true' … |
| 1.3.6.1.4.1.4491.2.1.20.1.31.1.4 | ColumndocsIf3CmMdCfgIpProvModeStorageType | read-write | current | This attribute determines if the CM persists the value of IpProvMode across a single reset or across all resets. The default value of this attribute is 'nonVol… |
| 1.3.6.1.4.1.4491.2.1.20.1.34 | NodedocsIf3CmSpectrumAnalysisCtrlCmd | |||
| 1.3.6.1.4.1.4491.2.1.20.1.34.1 | ScalardocsIf3CmSpectrumAnalysisCtrlCmdEnable | read-write | current | This attribute is used to enable or disable the spectrum analyzer feature. Setting this attribute to true triggers the CM to initiate measurements for the spec… |
| 1.3.6.1.4.1.4491.2.1.20.1.34.2 | ScalardocsIf3CmSpectrumAnalysisCtrlCmdInactivityTimeout | read-write | current | This attribute controls the length of time after the last spectrum analysis measurement before the feature is automatically disabled. If set to a value of 0, t… |
| 1.3.6.1.4.1.4491.2.1.20.1.34.3 | ScalardocsIf3CmSpectrumAnalysisCtrlCmdFirstSegmentCenterFrequency | read-write | current | This attribute controls the center frequency of the first segment for the spectrum analysis measurement. The frequency bins for this segment lie symmetrically … |
| 1.3.6.1.4.1.4491.2.1.20.1.34.4 | ScalardocsIf3CmSpectrumAnalysisCtrlCmdLastSegmentCenterFrequency | read-write | current | This attribute controls the center frequency of the last segment of the spectrum analysis measurement. The frequency bins for this segment lie symmetrically to… |
| 1.3.6.1.4.1.4491.2.1.20.1.34.5 | ScalardocsIf3CmSpectrumAnalysisCtrlCmdSegmentFrequencySpan | read-write | current | This attribute controls the frequency span of each segment (instance) in the docsIf3CmSpectrumAnalysisMeasTable. If set to a value of 0, then a default span wi… |
| 1.3.6.1.4.1.4491.2.1.20.1.34.6 | ScalardocsIf3CmSpectrumAnalysisCtrlCmdNumBinsPerSegment | read-write | current | This attribute controls the number of bins collected by the measurement performed for each segment (instance) in the docsIf3CmSpectrumAnalysisMeasTable. Note t… |
| 1.3.6.1.4.1.4491.2.1.20.1.34.7 | ScalardocsIf3CmSpectrumAnalysisCtrlCmdEquivalentNoiseBandwidth | read-write | current | This attribute allows the user to request an equivalent noise bandwidth for the resolution bandwidth filter used in the spectrum analysis. This corresponds to … |
| 1.3.6.1.4.1.4491.2.1.20.1.34.8 | ScalardocsIf3CmSpectrumAnalysisCtrlCmdWindowFunction | read-write | current | This attribute controls or indicates the windowing function which will be used when performing the discrete Fourier transform for the analysis. The WindowFunct… |
| 1.3.6.1.4.1.4491.2.1.20.1.34.9 | ScalardocsIf3CmSpectrumAnalysisCtrlCmdNumberOfAverages | read-write | current | This attribute controls the number of averages that will be performed on spectral bins. The average will be computed using the 'leaky integrator' method, where… |
| 1.3.6.1.4.1.4491.2.1.20.1.36 | TabledocsIf3CmtsCmEmStatsTable | not-accessible | current | This table defines Energy Management mode statistics for the CM as reported by the CMTS. For example, such metrics can provide insight into configuration of ap… |
| 1.3.6.1.4.1.4491.2.1.20.1.36.1 | RowdocsIf3CmtsCmEmStatsEntry | not-accessible | current | The conceptual row of docsIf3CmtsCmEmStatsTable. |
| 1.3.6.1.4.1.4491.2.1.20.1.36.1.1 | ColumndocsIf3CmtsCmEmStatsEm1x1ModeTotalDuration | read-only | current | This attribute indicates the total time duration, in seconds since registration, the CM identified by docsIf3CmtsCmRegStatusId has been in Energy Management 1x… |
| 1.3.6.1.4.1.4491.2.1.20.2 | NodedocsIf3MibConformance | |||
| 1.3.6.1.4.1.4491.2.1.20.2.1 | NodedocsIf3MibCompliances | |||
| 1.3.6.1.4.1.4491.2.1.20.2.1.1 | CompliancedocsIf3CmtsCompliance | current | The compliance statement for the CMTS. | |
| 1.3.6.1.4.1.4491.2.1.20.2.1.2 | CompliancedocsIf3CmCompliance | current | The compliance statement for the CM. | |
| 1.3.6.1.4.1.4491.2.1.20.2.2 | NodedocsIf3MibGroups | |||
| 1.3.6.1.4.1.4491.2.1.20.2.2.1 | GroupdocsIf3CmtsGroup | current | Group of objects implemented in the CMTS | |
| 1.3.6.1.4.1.4491.2.1.20.2.2.2 | GroupdocsIf3CmGroup | current | Group of objects implemented in the CM | |
| 1.3.6.1.4.1.4491.2.1.20.2.2.3 | GroupdocsIf3CmtsNotificationGroup | current | CMTS is required to support notifications in this group | |
| 1.3.6.1.4.1.4491.2.1.20.2.2.4 | GroupdocsIf3CmNotificationGroup | current | CM is required to support notifications in this group |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AmplitudeData | OCTET STRING (SIZE(0 | 2..255)) | current | This data type represents a sequence of spectral amplitudes. Each spectral amplitude value corresponds to a bin. The format of the bin measurement is as follows. Sequence of: 4 bytes: ChCenterFreq The center frequency o… |
| AttrAggrRuleMask | OCTET STRING (SIZE (4)) | current | This data type represents a sequence of 32-bit positions that defines logical (e.g. AND, OR) operations to match against the channel list Provisioned Mask and Service Flow Required Mask bit positions when the CMTS is de… |
| AttributeMask | BITS { bonding(0), lowLatency(1), highAvailability(2) } | current | This data type consists of a sequence of 32-bit positions used to select the bonding group or the channel to which a service flow is assigned. DOCSIS defines three types of Attribute Masks for which this type applies: T… |
| ChannelList | OCTET STRING (SIZE (0..255)) | current | This data type represents a unique set of channel IDs in either the upstream or the downstream direction. Each octet represents a UCID or DCID depending on the direction of the channels within the list. The CMTS must en… |
| ChId | Unsigned32 (0..255) | current | This data type is an 8-bit number that represents a provisioned Downstream Channel ID (DCID) or a provisioned Upstream Channel ID (UCID). A Channel Id is unique per direction within a MAC Domain. The value zero is reser… |
| ChSetId | Unsigned32 | current | This data type is a CMTS-derived unique number within a MAC Domain used to reference a Channel Set within the CMTS. Values in the range of 1 to 255 define a single-channel Channel Set and correspond to either the Downst… |
| CmRegState | INTEGER {other(1), notReady(2), notSynchronized(3), phySynchronized(4), dsTopologyResolutionInProgress(21), usParametersAcquired(5), rangingInProgress(22), rangingComplete(6), eaeInProgress(14), dhcpv4InProgress(15), dhcpv6InProgress(16), dhcpv4Complete(7), dhcpv6Complete(17), todEstablished(8), securityEstablished(9), configFileDownloadComplete(10), registrationInProgress(18), registrationComplete(11), accessDenied(13), operational(12), bpiInit (19), forwardingDisabled(20), rfMuteAll(23) } | current | This data type defines the CM connectivity state as reported by the CM. The enumerated values associated with the CmRegState are: 'other' indicates any state not described below. 'notReady' indicates that the CM has not… |
| CmtsCmRegState | INTEGER {other (1), initialRanging(2), rangingAutoAdjComplete(4), startEae(10), startDhcpv4 (11), startDhcpv6(12), dhcpv4Complete(5), dhcpv6Complete(13), startConfigFileDownload(14), configFileDownloadComplete(15), startRegistration(16), registrationComplete(6), operational (8), bpiInit(9), forwardingDisabled(17), rfMuteAll(18) } | current | This data type defines the CM connectivity states as reported by the CMTS. The enumerated values associated with the CmtsCmRegState are: 'other' indicates any state not described below. 'initialRanging' indicates that t… |
| Dsid | Unsigned32 (0..1048575) | current | This data type defines the 20-bit Downstream Service Identifier (DSID) used by the CM for downstream resequencing, filtering, and forwarding. The value zero is reserved for use when the DSID is unknown or does not apply. |
| IfDirection | INTEGER { downstream(1), upstream(2) } | current | Indicates a direction on an RF MAC interface. The value downstream(1) is from Cable Modem Termination System to Cable Modem. The value upstream(2) is from Cable Modem to Cable Modem Termination System. |
| RangingState | INTEGER {other(1), aborted(2), retriesExceeded(3), success(4), continue(5), timeoutT4(6) } | current | This data type defines the CM ranging state as reported by the CMTS. The enumerated values associated with the RangingState are: 'other' indicates any state not described below. 'aborted' indicates that the CMTS has sen… |
| RcpId | OCTET STRING (SIZE (5)) | current | This data type defines a 'Receive Channel Profile Identifier' (RCP-ID). An RCP-ID consists of 5-octet length string where the first 3-bytes (from left to right corresponds to the Organizational Unique ID (OUI) followed … |
| ScdmaSelectionString | OCTET STRING (SIZE(0 | 16)) | current | This data type represents the S-CDMA selection string for active codes used with Selectable Active Codes Mode 2. A 128-bit string indicating which codes are active. The first element in the string corresponds to code 0 … |
| SpectrumAnalysisWindowFunction | INTEGER { other(0), hann(1), blackmanHarris(2), rectangular(3), hamming(4), flatTop(5), gaussian(6), chebyshev(7) } | current | This object controls the windowing function which will be used when performing the discrete fourier transform for the analysis. Note that all window functions may not be supported by all devices. If an attempt is made t… |
| Tlv8 | OCTET STRING (SIZE(0 | 2..255)) | current | This data type represents a single TLV encoding. This first octet represents the Type of the TLV. The second octet represents an unsigned 8-bit Length of the subsequent Value part of the TLV. The remaining octets repres… |