DOCS-IFEXT2-MIB
39 objects
This MIB module contains the management objects that enhance DOCSIS 2.0 feature set. It includes SCDMA capability of limiting the number of codes assigned to a CM over the total active codes, referred as Maximum Scheduled Codes (MSC).
Imported Objects
| CLAB-DEF-MIB | clabProjDocsis |
| DOCS-IF-MIB | docsIfCmtsCmStatusIndex TenthdB TenthdBmV |
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Gauge32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4491.2.1.5 | IdentitydocsIfExt2Mib | This MIB module contains the management objects that enhance DOCSIS 2.0 feature set. It includes SCDMA capability of limiting the number of codes assigned to a… | ||
| 1.3.6.1.4.1.4491.2.1.5.0 | NodedocsIfExt2Notifications | |||
| 1.3.6.1.4.1.4491.2.1.5.1 | NodedocsIfExt2MibObjects | |||
| 1.3.6.1.4.1.4491.2.1.5.1.1 | NodedocsIfExt2BaseObjects | |||
| 1.3.6.1.4.1.4491.2.1.5.1.2 | NodedocsIfExt2CmObjects | |||
| 1.3.6.1.4.1.4491.2.1.5.1.2.1 | TabledocsIfExt2CmMscStatusTable | not-accessible | current | This table extends the docsIfCmStatusTable to report the CM MSC status. |
| 1.3.6.1.4.1.4491.2.1.5.1.2.1.1 | RowdocsIfExt2CmMscStatusEntry | not-accessible | current | As an extension of docsIdCmStatusTable this table has entries for each ifEntry with an ifType of docsCableMaclayer(127) This entry is instantiated by the CM on… |
| 1.3.6.1.4.1.4491.2.1.5.1.2.1.1.1 | ColumndocsIfExt2CmMscStatusState | read-only | current | Indicates the current state of the Maximum Scheduled Codes feature on the CM. channelEnabled(1) S-CDMA Maximum Scheduled Codes is enabled in the UCD TLV-17. ch… |
| 1.3.6.1.4.1.4491.2.1.5.1.2.1.1.2 | ColumndocsIfExt2CmMscStatusPowerShortfall | read-only | current | Indicates the Power Shortfall at the CM, in units of tenth dB. The value is provided by the CM and is sent in the RNG-REQ message. It is internally calculated … |
| 1.3.6.1.4.1.4491.2.1.5.1.2.1.1.3 | ColumndocsIfExt2CmMscStatusCodeRatio | read-only | current | Indicates the maximum ratio of number of active codes to Maximum Scheduled Codes that the CM can support, as reported in the Ranging Request. |
| 1.3.6.1.4.1.4491.2.1.5.1.2.1.1.4 | ColumndocsIfExt2CmMscStatusMaximumScheduledCodes | read-only | current | Indicates the Maximum Scheduled Codes in use by the CM. The value is provided by the CMTS through a TLV value in the RNG-RSP message. Note that not all values … |
| 1.3.6.1.4.1.4491.2.1.5.1.2.1.1.5 | ColumndocsIfExt2CmMscStatusPowerHeadroom | read-only | current | Indicates the Maximum Scheduled Codes Power Headroom in use by the CM, in units of tenth dB. The value is provided by the CMTS in units of quarter dB through T… |
| 1.3.6.1.4.1.4491.2.1.5.1.2.1.1.6 | ColumndocsIfExt2CmMscStatusEffectivePower | read-only | current | Indicates the Effective Transmit Power of the CM. This is the power that would result hypothetically if, in a spreader-on frame, the CM were to transmit on all… |
| 1.3.6.1.4.1.4491.2.1.5.1.2.1.1.7 | ColumndocsIfExt2CmMscStatusIUC2Control | read-write | current | The CM usage of IUC2 when MSC is enabled: noIUC2(1): CM usage of IUC2 is prohibited limitedIUC2(2): CM is allowed to use IUC2 as long as the CM does not exceed… |
| 1.3.6.1.4.1.4491.2.1.5.1.3 | NodedocsIfExt2CmtsObjects | |||
| 1.3.6.1.4.1.4491.2.1.5.1.3.1 | ScalardocsIfExt2CmtsMscGlobalEnable | read-write | current | Indicates the global state of the Maximum Scheduled Code feature on the CMTS. The value true(1) indicates that this feature can be enabled on individual logica… |
| 1.3.6.1.4.1.4491.2.1.5.1.3.2 | TabledocsIfExt2CmtsCmMscStatusTable | not-accessible | current | This table extends the docsIfCmtsCmStatusTable to report CM MSC status. |
| 1.3.6.1.4.1.4491.2.1.5.1.3.2.1 | RowdocsIfExt2CmtsCmMscStatusEntry | not-accessible | current | An entry for MSC CM status report. Only CMs allocated to SCDMA upstream channels are included in this table. |
| 1.3.6.1.4.1.4491.2.1.5.1.3.2.1.1 | ColumndocsIfExt2CmtsCmMscStatusPowerShortfall | read-only | current | Indicates the Power Shortfall at the CM, in units of tenth dB. The value is provided by the CM and is sent in the RNG-REQ message. It is internally calculated … |
| 1.3.6.1.4.1.4491.2.1.5.1.3.2.1.2 | ColumndocsIfExt2CmtsCmMscStatusCodeRatio | read-only | current | Indicates the maximum ratio of number of active codes to Maximum Scheduled Codes that the CM reported in the Ranging Request. |
| 1.3.6.1.4.1.4491.2.1.5.1.3.2.1.3 | ColumndocsIfExt2CmtsCmMscStatusMaximumScheduledCodes | read-only | current | Indicates the Maximum Scheduled Codes value in use by the CM. The value is provided by the CMTS through a TLV in the RNG-RSP message. Note that not all values … |
| 1.3.6.1.4.1.4491.2.1.5.1.3.2.1.4 | ColumndocsIfExt2CmtsCmMscStatusPowerHeadroom | read-only | current | Indicates the Maximum Scheduled Codes Power Headroom in use by the CM, in units of tenth dB. The value is provided by the CMTS in units of quarter dB through a… |
| 1.3.6.1.4.1.4491.2.1.5.1.3.2.1.5 | ColumndocsIfExt2CmtsCmMscStatusMeasuredSNR | read-only | current | The signal to noise ratio perceived for this cable modem on the upstream logical channel as of the last station maintenance. |
| 1.3.6.1.4.1.4491.2.1.5.1.3.2.1.6 | ColumndocsIfExt2CmtsCmMscStatusEffectiveSNR | read-only | current | The signal to noise ratio estimated for this cable modem on the upstream logical channel, referenced to 64QAM modulation. It is defined as the measured SNR at … |
| 1.3.6.1.4.1.4491.2.1.5.1.3.3 | TabledocsIfExt2CmtsUpChannelMscTable | not-accessible | current | This table extends the docsIfUpstreamChannelTable to report CM MSC status. |
| 1.3.6.1.4.1.4491.2.1.5.1.3.3.1 | RowdocsIfExt2CmtsUpChannelMscEntry | not-accessible | current | An entry for MSC upstream status report. Only SCDMA logical upstream channels (i.e., ifType=docsCableUpstreamChannel(205) and docsIfUpChannelType=scdma(3)) are… |
| 1.3.6.1.4.1.4491.2.1.5.1.3.3.1.1 | ColumndocsIfExt2CmtsUpChannelMscState | read-write | current | Indicates the state of the Maximum Scheduled Codes feature for an individual logical channel on the CMTS. The state will transition automatically from dormant(… |
| 1.3.6.1.4.1.4491.2.1.5.1.3.3.1.2 | ColumndocsIfExt2CmtsUpChannelMSCTotalCMs | read-only | current | Total number of CMs with docsIfCmtsCmStatusValue of registrationComplete with MSC active. |
| 1.3.6.1.4.1.4491.2.1.5.1.3.3.1.3 | ColumndocsIfExt2CmtsUpChannelMSCLimitIUC1 | read-only | current | Indicates that, in order to prevent CMs from exceeding MSC, the CMTS will limit the scheduling of broadcast IUC1 to at most this many SCDMA codes per SCMDA fra… |
| 1.3.6.1.4.1.4491.2.1.5.1.3.3.1.4 | ColumndocsIfExt2CmtsUpChannelMSCMinimumValue | read-write | current | When Maximum Scheduled Codes is enabled, instructs the CMTS to assign cable modems MSC values no less than this value. |
| 1.3.6.1.4.1.4491.2.1.5.1.3.4 | TabledocsIfExt2CmtsUpChannelTable | not-accessible | current | This table extends the docsIfUpstreamChannelTable to report additional upstream status information. |
| 1.3.6.1.4.1.4491.2.1.5.1.3.4.1 | RowdocsIfExt2CmtsUpChannelEntry | not-accessible | current | An entry for upstream status information. |
| 1.3.6.1.4.1.4491.2.1.5.1.3.4.1.1 | ColumndocsIfExt2CmtsUpChannelTotalCMs | read-only | current | Total number of CMs with docsIfCmtsCmStatusValue of registrationComplete. |
| 1.3.6.1.4.1.4491.2.1.5.2 | NodedocsIfExt2Conformance | |||
| 1.3.6.1.4.1.4491.2.1.5.2.1 | NodedocsIfExt2Compliances | |||
| 1.3.6.1.4.1.4491.2.1.5.2.1.1 | CompliancedocsIfExt2Compliance | current | The compliance statement for DOCSIS 20 enhanced features. | |
| 1.3.6.1.4.1.4491.2.1.5.2.2 | NodedocsIfExt2Groups | |||
| 1.3.6.1.4.1.4491.2.1.5.2.2.1 | GroupdocsIfExt2CmGroup | current | Group of objects implemented in Cable Modems. | |
| 1.3.6.1.4.1.4491.2.1.5.2.2.2 | GroupdocsIfExt2CmtsGroup | current | Group of objects implemented in Cable Modem Termination Systems. |