DOCS-QOS3-MIB
289 objects
This MIB module contains the management objects for the management of QoS for channel bonding. Copyright 1999-2014 Cable Television Laboratories, Inc. All rights reserved.
Imported Objects
| CLAB-DEF-MIB | clabProjDocsis DocsL2vpnIfList |
| DIFFSERV-DSCP-TC | DscpOrAny |
| DOCS-IF3-MIB | AttrAggrRuleMask AttributeMask ChannelList ChId ChSetId Dsid IfDirection |
| IF-MIB | -- RFC 3411 InterfaceIndex ifIndex |
| INET-ADDRESS-MIB | -- RFC 2863 InetAddressType InetAddress InetPortNumber |
| SNMP-FRAMEWORK-MIB | -- RFC 2580 SnmpAdminString |
| SNMPv2-CONF | -- RFC 2579 OBJECT-GROUP MODULE-COMPLIANCE |
| SNMPv2-SMI | Counter32 Counter64 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | -- RFC 2578 TEXTUAL-CONVENTION MacAddress RowStatus StorageType TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4491.2.1.21 | IdentitydocsQosMib | This MIB module contains the management objects for the management of QoS for channel bonding. Copyright 1999-2014 Cable Television Laboratories, Inc. All righ… | ||
| 1.3.6.1.4.1.4491.2.1.21.1 | NodedocsQosMibObjects | |||
| 1.3.6.1.4.1.4491.2.1.21.1.1 | TabledocsQosPktClassTable | not-accessible | current | This object describes the packet classification configured on the CM or CMTS. The model is that a packet either received as input from an interface or transmit… |
| 1.3.6.1.4.1.4491.2.1.21.1.1.1 | RowdocsQosPktClassEntry | not-accessible | current | The conceptual row of docsQosPktClassTable. The ifIndex key corresponds to the MAC Domain interface of the service flow of this classifier. |
| 1.3.6.1.4.1.4491.2.1.21.1.1.1.1 | ColumndocsQosPktClassId | not-accessible | current | This key indicates the assigned identifier to the packet classifier instance by the CMTS, which is unique per Service Flow. For UDCs this corresponds to the Se… |
| 1.3.6.1.4.1.4491.2.1.21.1.1.1.2 | ColumndocsQosPktClassDirection | read-only | current | This attribute indicates the direction to which the classifier is applied. |
| 1.3.6.1.4.1.4491.2.1.21.1.1.1.3 | ColumndocsQosPktClassPriority | read-only | current | This attribute specifies the order of evaluation of the classifiers. The higher the value, the higher the priority. The value of 0 is used as default in provis… |
| 1.3.6.1.4.1.4491.2.1.21.1.1.1.4 | ColumndocsQosPktClassIpTosLow | read-only | current | This attribute indicates the low value of a range of TOS byte values. If the referenced parameter is not present in a classifier, this attribute reports the va… |
| 1.3.6.1.4.1.4491.2.1.21.1.1.1.5 | ColumndocsQosPktClassIpTosHigh | read-only | current | This attribute indicates the 8-bit high value of a range of TOS byte values. If the referenced parameter is not present in a classifier, this attribute reports… |
| 1.3.6.1.4.1.4491.2.1.21.1.1.1.6 | ColumndocsQosPktClassIpTosMask | read-only | current | This attribute indicates the mask value is bitwise ANDed with TOS byte in an IP packet, and this value is used for range checking of TosLow and TosHigh. If the… |
| 1.3.6.1.4.1.4491.2.1.21.1.1.1.7 | ColumndocsQosPktClassIpProtocol | read-only | current | This attribute indicates the value of the IP Protocol field required for IP packets to match this rule. The value 256 matches traffic with any IP Protocol valu… |
| 1.3.6.1.4.1.4491.2.1.21.1.1.1.8 | ColumndocsQosPktClassIpSourceAddr | read-only | current | This attribute specifies the value of the IP Source Address required for packets to match this rule. An IP packet matches the rule when the packet IP Source Ad… |
| 1.3.6.1.4.1.4491.2.1.21.1.1.1.9 | ColumndocsQosPktClassIpSourceMask | read-only | current | This attribute specifies which bits of a packet's IP Source Address are compared to match this rule. An IP packet matches the rule when the packet source addre… |
| 1.3.6.1.4.1.4491.2.1.21.1.1.1.10 | ColumndocsQosPktClassIpDestAddr | read-only | current | This attribute specifies the value of the IP Destination Address required for packets to match this rule. An IP packet matches the rule when the packet IP Dest… |
| 1.3.6.1.4.1.4491.2.1.21.1.1.1.11 | ColumndocsQosPktClassIpDestMask | read-only | current | This attribute specifies which bits of a packet's IP Destination Address are compared to match this rule. An IP packet matches the rule when the packet destina… |
| 1.3.6.1.4.1.4491.2.1.21.1.1.1.12 | ColumndocsQosPktClassSourcePortStart | read-only | current | This attribute specifies the low-end inclusive range of TCP/UDP source port numbers to which a packet is compared. This attribute is irrelevant for non-TCP/UDP… |
| 1.3.6.1.4.1.4491.2.1.21.1.1.1.13 | ColumndocsQosPktClassSourcePortEnd | read-only | current | This attribute specifies the high-end inclusive range of TCP/UDP source port numbers to which a packet is compared. This attribute is irrelevant for non-TCP/UD… |
| 1.3.6.1.4.1.4491.2.1.21.1.1.1.14 | ColumndocsQosPktClassDestPortStart | read-only | current | This attribute specifies the low-end inclusive range of TCP/UDP destination port numbers to which a packet is compared. If the referenced parameter is not pres… |
| 1.3.6.1.4.1.4491.2.1.21.1.1.1.15 | ColumndocsQosPktClassDestPortEnd | read-only | current | This attribute specifies the high-end inclusive range of TCP/UDP destination port numbers to which a packet is compared. If the referenced parameter is not pre… |
| 1.3.6.1.4.1.4491.2.1.21.1.1.1.16 | ColumndocsQosPktClassDestMacAddr | read-only | current | An Ethernet packet matches an entry when its destination MAC address bitwise ANDed with DestMacMask equals the value of DestMacAddr. If the referenced paramete… |
| 1.3.6.1.4.1.4491.2.1.21.1.1.1.17 | ColumndocsQosPktClassDestMacMask | read-only | current | An Ethernet packet matches an entry when its destination MAC address bitwise ANDed with DestMacMask equals the value of DestMacAddr. If the referenced paramete… |
| 1.3.6.1.4.1.4491.2.1.21.1.1.1.18 | ColumndocsQosPktClassSourceMacAddr | read-only | current | An Ethernet packet matches this entry when its source MAC address equals the value of this attribute. If the referenced parameter is not present in a classifie… |
| 1.3.6.1.4.1.4491.2.1.21.1.1.1.19 | ColumndocsQosPktClassEnetProtocolType | read-only | current | This attribute indicates the format of the layer 3 protocol ID in the Ethernet packet. A value of 'none' means that the rule does not use the layer 3 protocol … |
| 1.3.6.1.4.1.4491.2.1.21.1.1.1.20 | ColumndocsQosPktClassEnetProtocol | read-only | current | If EnetProtocolType is 'none', this attribute is ignored when considering whether a packet matches the current rule. If EnetProtocolType is 'ethertype', this a… |
| 1.3.6.1.4.1.4491.2.1.21.1.1.1.22 | ColumndocsQosPktClassUserPriLow | read-only | current | This attribute applies only to Ethernet frames using the 802.1P/Q tag header (indicated with EtherType 0x8100). Such frames include a 16-bit Tag that contains … |
| 1.3.6.1.4.1.4491.2.1.21.1.1.1.23 | ColumndocsQosPktClassUserPriHigh | read-only | current | This attribute applies only to Ethernet frames using the 802.1P/Qtag header (indicated with EtherType 0x8100). Such frames include a 16-bit Tag that contains a… |
| 1.3.6.1.4.1.4491.2.1.21.1.1.1.24 | ColumndocsQosPktClassVlanId | read-only | current | This attribute applies only to Ethernet frames using the 802.1P/Q tag header. Tagged packets must have a VLAN Identifier that matches the value in order to mat… |
| 1.3.6.1.4.1.4491.2.1.21.1.1.1.25 | ColumndocsQosPktClassState | read-only | current | This attribute indicates whether or not the classifier is enabled to classify packets to a Service Flow. If the referenced parameter is not present in the clas… |
| 1.3.6.1.4.1.4491.2.1.21.1.1.1.26 | ColumndocsQosPktClassPkts | read-only | current | This attribute counts the number of packets that have been classified using this entry. This includes all packets delivered to a Service Flow maximum rate poli… |
| 1.3.6.1.4.1.4491.2.1.21.1.1.1.27 | ColumndocsQosPktClassBitMap | read-only | current | This attribute indicates which parameter encodings were actually present in the DOCSIS packet classifier encoding signaled in the DOCSIS message that created o… |
| 1.3.6.1.4.1.4491.2.1.21.1.1.1.28 | ColumndocsQosPktClassIpAddrType | read-only | current | This attribute indicates the type of the Internet address for InetSourceAddr, InetSourceMask, InetDestAddr, and InetDestMask. If the referenced parameter is no… |
| 1.3.6.1.4.1.4491.2.1.21.1.1.1.29 | ColumndocsQosPktClassFlowLabel | read-only | current | This attribute represents the Flow Label field in the IPv6 header to be matched by the classifier. The value zero indicates that the Flow Label is not specifie… |
| 1.3.6.1.4.1.4491.2.1.21.1.1.1.30 | ColumndocsQosPktClassCmInterfaceMask | read-only | current | This attribute represents a bit-mask of the CM in-bound interfaces to which this classifier applies. This attribute only applies to QOS upstream Classifiers an… |
| 1.3.6.1.4.1.4491.2.1.21.1.1.1.31 | ColumndocsQosPktClassIcmpTypeLow | read-only | current | This attribute specifies the low-end inclusive range of the ICMP type numbers to which a packet is compared. If the referenced parameter is not present in a cl… |
| 1.3.6.1.4.1.4491.2.1.21.1.1.1.32 | ColumndocsQosPktClassIcmpTypeHigh | read-only | current | This attribute specifies the high-end inclusive range of the ICMP type numbers to which a packet is compared. If the referenced parameter is not present in a c… |
| 1.3.6.1.4.1.4491.2.1.21.1.2 | TabledocsQosParamSetTable | not-accessible | current | This object describes the set of QOS parameters defined in a managed device. DOCSIS 1.0 COS service profiles are not represented in this object. Each row corre… |
| 1.3.6.1.4.1.4491.2.1.21.1.2.1 | RowdocsQosParamSetEntry | not-accessible | current | The conceptual row of docsQosParamSetTable. The ifIndex key corresponds to the MAC Domain interface of the service flow of this Qos Param Set. |
| 1.3.6.1.4.1.4491.2.1.21.1.2.1.4 | ColumndocsQosParamSetServiceClassName | read-only | current | This attribute represents the Service Class Name from which the parameter set values were derived. If the referenced parameter is not present in the correspond… |
| 1.3.6.1.4.1.4491.2.1.21.1.2.1.5 | ColumndocsQosParamSetPriority | read-only | current | This attribute represents the relative priority of a Service Flow. Higher numbers indicate higher priority. This priority should only be used to differentiate … |
| 1.3.6.1.4.1.4491.2.1.21.1.2.1.6 | ColumndocsQosParamSetMaxTrafficRate | read-only | current | This attribute represents the maximum sustained traffic rate allowed for this Service Flow in bits/sec. It counts all MAC frame data PDUs from the bytes follow… |
| 1.3.6.1.4.1.4491.2.1.21.1.2.1.7 | ColumndocsQosParamSetMaxTrafficBurst | read-only | current | This attribute specifies the token bucket size in bytes for this parameter set. The value is calculated from the byte following the MAC header HCS to the end o… |
| 1.3.6.1.4.1.4491.2.1.21.1.2.1.8 | ColumndocsQosParamSetMinReservedRate | read-only | current | This attribute specifies the guaranteed minimum rate in bits/sec for this parameter set. The value is calculated from the byte following the MAC header HCS to … |
| 1.3.6.1.4.1.4491.2.1.21.1.2.1.9 | ColumndocsQosParamSetMinReservedPkt | read-only | current | This attribute specifies an assumed minimum packet size in bytes for which the MinReservedRate will be provided. The value is calculated from the byte followin… |
| 1.3.6.1.4.1.4491.2.1.21.1.2.1.10 | ColumndocsQosParamSetActiveTimeout | read-only | current | This attribute specifies the maximum duration in seconds that resources remain unused on an active service flow before the CMTS signals that both the active an… |
| 1.3.6.1.4.1.4491.2.1.21.1.2.1.11 | ColumndocsQosParamSetAdmittedTimeout | read-only | current | This attribute specifies the maximum duration in seconds that resources remain in admitted state before resources must be released. The value of 0 signifies an… |
| 1.3.6.1.4.1.4491.2.1.21.1.2.1.12 | ColumndocsQosParamSetMaxConcatBurst | read-only | current | This attribute specifies the maximum concatenated burst in bytes that an upstream Service Flow is allowed. The value is calculated from the FC byte of the Conc… |
| 1.3.6.1.4.1.4491.2.1.21.1.2.1.13 | ColumndocsQosParamSetSchedulingType | read-only | current | This attribute specifies the upstream scheduling service used for upstream Service Flow. If the referenced parameter is not present in the corresponding DOCSIS… |
| 1.3.6.1.4.1.4491.2.1.21.1.2.1.14 | ColumndocsQosParamSetNomPollInterval | read-only | current | This attribute specifies the nominal interval in microseconds between successive unicast request opportunities on an upstream Service Flow. This attribute appl… |
| 1.3.6.1.4.1.4491.2.1.21.1.2.1.15 | ColumndocsQosParamSetTolPollJitter | read-only | current | This attribute specifies the maximum amount of time in microseconds that the unicast request interval may be delayed from the nominal periodic schedule on an u… |
| 1.3.6.1.4.1.4491.2.1.21.1.2.1.16 | ColumndocsQosParamSetUnsolicitGrantSize | read-only | current | This attribute specifies the unsolicited grant size in bytes. The grant size includes the entire MAC frame data PDU from the Frame Control byte to the end of t… |
| 1.3.6.1.4.1.4491.2.1.21.1.2.1.17 | ColumndocsQosParamSetNomGrantInterval | read-only | current | This attribute specifies the nominal interval in microseconds between successive data grant opportunities on an upstream Service Flow. The referenced parameter… |
| 1.3.6.1.4.1.4491.2.1.21.1.2.1.18 | ColumndocsQosParamSetTolGrantJitter | read-only | current | This attribute specifies the maximum amount of time in microseconds that the transmission opportunities may be delayed from the nominal periodic schedule. The … |
| 1.3.6.1.4.1.4491.2.1.21.1.2.1.19 | ColumndocsQosParamSetGrantsPerInterval | read-only | current | This attribute specifies the number of data grants per Nominal Grant Interval (NomGrantInterval). The referenced parameter is applicable only for upstream flow… |
| 1.3.6.1.4.1.4491.2.1.21.1.2.1.20 | ColumndocsQosParamSetTosAndMask | read-only | current | This attribute specifies the AND mask for the IP TOS byte for overwriting an IPv4 packet's TOS value or IPv6 packet's Traffic Class value. The IP packet TOS by… |
| 1.3.6.1.4.1.4491.2.1.21.1.2.1.21 | ColumndocsQosParamSetTosOrMask | read-only | current | This attribute specifies the OR mask for the IPv4 TOS value or IPv6 Traffic Class value. See the description of TosAndMask for further details. The IP TOS octe… |
| 1.3.6.1.4.1.4491.2.1.21.1.2.1.22 | ColumndocsQosParamSetMaxLatency | read-only | current | This attribute specifies the maximum latency between the reception of a packet by the CMTS on its NSI and the forwarding of the packet to the RF interface. A v… |
| 1.3.6.1.4.1.4491.2.1.21.1.2.1.23 | ColumndocsQosParamSetType | not-accessible | current | This key represents the QoS Parameter Set Type of the Service Flow. The following values are defined: 'active' Indicates the Active QOS parameter set, describi… |
| 1.3.6.1.4.1.4491.2.1.21.1.2.1.24 | ColumndocsQosParamSetRequestPolicyOct | read-only | current | This attribute specifies which transmit interval opportunities the CM omits for upstream transmission requests and packet transmissions. This object takes its … |
| 1.3.6.1.4.1.4491.2.1.21.1.2.1.25 | ColumndocsQosParamSetBitMap | read-only | current | This attribute indicates the set of QOS Parameter Set parameters actually signaled in the DOCSIS registration or dynamic service request message that created o… |
| 1.3.6.1.4.1.4491.2.1.21.1.2.1.26 | ColumndocsQosParamSetServiceFlowId | not-accessible | current | This key represents the Service Flow ID for the service flow. |
| 1.3.6.1.4.1.4491.2.1.21.1.2.1.27 | ColumndocsQosParamSetRequiredAttrMask | read-only | current | This attribute specifies the Required Attribute Mask to compare with the Provisioned Required Attributes when selecting the bonding groups for the service flow… |
| 1.3.6.1.4.1.4491.2.1.21.1.2.1.28 | ColumndocsQosParamSetForbiddenAttrMask | read-only | current | This attribute specifies the Forbidden Attribute Mask to compare with the Provisioned Forbidden Attributes when selecting the bonding groups for the service fl… |
| 1.3.6.1.4.1.4491.2.1.21.1.2.1.29 | ColumndocsQosParamSetAttrAggrRuleMask | read-only | current | This attribute specifies the Attribute Aggregation Mask to compare the Service Flow Required and Forbidden Attributes with the CMTS dynamically-created bonding… |
| 1.3.6.1.4.1.4491.2.1.21.1.2.1.30 | ColumndocsQosParamSetAppId | read-only | current | This attribute represents the Application Identifier associated with the service flow for purposes beyond the scope of this specification. If the referenced pa… |
| 1.3.6.1.4.1.4491.2.1.21.1.2.1.31 | ColumndocsQosParamSetMultiplierContentionReqWindow | read-only | current | This attribute specifies the multiplier to be applied by a CM when performing contention request backoff for data requests. This attribute only applies to upst… |
| 1.3.6.1.4.1.4491.2.1.21.1.2.1.32 | ColumndocsQosParamSetMultiplierBytesReq | read-only | current | This attribute specifies the assumed bandwidth request multiplier. This attribute only applies to upstream Service Flows in 3.0 operation. If the referenced pa… |
| 1.3.6.1.4.1.4491.2.1.21.1.2.1.33 | ColumndocsQosParamSetMaxReqPerSidCluster | read-only | deprecated | This attribute specifies the maximum number of requests that a CM can make within a given SID Cluster before it must switch to a different SID Cluster to make … |
| 1.3.6.1.4.1.4491.2.1.21.1.2.1.34 | ColumndocsQosParamSetMaxOutstandingBytesPerSidCluster | read-only | deprecated | This attribute specifies the maximum number of bytes for which a CM can have requests outstanding on a given SID Cluster. If defined number of bytes are outsta… |
| 1.3.6.1.4.1.4491.2.1.21.1.2.1.35 | ColumndocsQosParamSetMaxTotBytesReqPerSidCluster | read-only | deprecated | This attribute specifies the maximum total number of bytes a CM can have requested using a given SID Cluster before it must switch to a different SID Cluster t… |
| 1.3.6.1.4.1.4491.2.1.21.1.2.1.36 | ColumndocsQosParamSetMaxTimeInSidCluster | read-only | deprecated | This attribute specifies the maximum time in milliseconds that a CM may use a particular SID Cluster before it must switch to a different SID Cluster to make f… |
| 1.3.6.1.4.1.4491.2.1.21.1.2.1.37 | ColumndocsQosParamSetPeakTrafficRate | read-only | current | This attribute specifies the rate parameter 'P' of a token-bucket-based peak rate limiter for packets of a service flow. A value of 0 signifies no Peak Traffic… |
| 1.3.6.1.4.1.4491.2.1.21.1.2.1.38 | ColumndocsQosParamSetDsResequencing | read-only | current | This attribute specifies if a resequencing DSID need to be allocated to the service flow. The value 'resequencingDsidIfBonded' indicates that a resequencing DS… |
| 1.3.6.1.4.1.4491.2.1.21.1.2.1.39 | ColumndocsQosParamSetMinimumBuffer | read-only | current | This attribute represents the configured minimum buffer size for the service flow. |
| 1.3.6.1.4.1.4491.2.1.21.1.2.1.40 | ColumndocsQosParamSetTargetBuffer | read-only | current | This attribute represents the configured target buffer size for the service flow. The value 0 indicates that no target buffer size was configured, and the devi… |
| 1.3.6.1.4.1.4491.2.1.21.1.2.1.41 | ColumndocsQosParamSetMaximumBuffer | read-only | current | This attribute represents the configured maximum buffer size for the service flow. The value 4294967295 indicates that no maximum buffer size was configured, a… |
| 1.3.6.1.4.1.4491.2.1.21.1.3 | TabledocsQosServiceFlowTable | not-accessible | current | This object describes the set of DOCSIS-QOS Service Flows in a managed device. |
| 1.3.6.1.4.1.4491.2.1.21.1.3.1 | RowdocsQosServiceFlowEntry | not-accessible | current | The conceptual row of docsQosServiceFlowTable. The ifIndex key corresponds to the MAC Domain interface of this service flow. |
| 1.3.6.1.4.1.4491.2.1.21.1.3.1.1 | ColumndocsQosServiceFlowId | not-accessible | current | This key represents an identifier assigned to a Service Flow by CMTS within a MAC Domain. The value 0 is used only for the purpose of reporting instances of th… |
| 1.3.6.1.4.1.4491.2.1.21.1.3.1.6 | ColumndocsQosServiceFlowSID | read-only | current | Service Identifier (SID) assigned to an admitted or active Service Flow. This attribute reports a value of 0 if a Service ID is not associated with the Service… |
| 1.3.6.1.4.1.4491.2.1.21.1.3.1.7 | ColumndocsQosServiceFlowDirection | read-only | current | This attribute represents the direction of the Service Flow. |
| 1.3.6.1.4.1.4491.2.1.21.1.3.1.8 | ColumndocsQosServiceFlowPrimary | read-only | current | This attribute reflects whether Service Flow is the primary or a secondary Service Flow. |
| 1.3.6.1.4.1.4491.2.1.21.1.3.1.9 | ColumndocsQosServiceFlowParamSetTypeStatus | read-only | current | This attribute represents the status of the service flow based on the admission state. 'active' bit set to '1' indicates that the service flow is active and th… |
| 1.3.6.1.4.1.4491.2.1.21.1.3.1.10 | ColumndocsQosServiceFlowChSetId | read-only | current | This attribute represents the Channel Set Id associated with the service flow. |
| 1.3.6.1.4.1.4491.2.1.21.1.3.1.11 | ColumndocsQosServiceFlowAttrAssignSuccess | read-only | current | If set to 'true', this attribute indicates that the current channel set associated with the service flow meets the Required and Forbidden Attribute Mask encodi… |
| 1.3.6.1.4.1.4491.2.1.21.1.3.1.12 | ColumndocsQosServiceFlowDsid | read-only | current | This attribute indicates the DSID associated with the downstream service flow. downstream service flows without a DSID or upstream Service Flows report the val… |
| 1.3.6.1.4.1.4491.2.1.21.1.3.1.13 | ColumndocsQosServiceFlowMaxReqPerSidCluster | read-only | current | This attribute specifies the maximum number of requests that a CM can make within a given SID Cluster before it must switch to a different SID Cluster to make … |
| 1.3.6.1.4.1.4491.2.1.21.1.3.1.14 | ColumndocsQosServiceFlowMaxOutstandingBytesPerSidCluster | read-only | current | This attribute specifies the maximum number of bytes for which a CM can have requests outstanding on a given SID Cluster. If defined number of bytes are outsta… |
| 1.3.6.1.4.1.4491.2.1.21.1.3.1.15 | ColumndocsQosServiceFlowMaxTotBytesReqPerSidCluster | read-only | current | This attribute specifies the maximum total number of bytes a CM can have requested using a given SID Cluster before it must switch to a different SID Cluster t… |
| 1.3.6.1.4.1.4491.2.1.21.1.3.1.16 | ColumndocsQosServiceFlowMaxTimeInSidCluster | read-only | current | This attribute specifies the maximum time in milliseconds that a CM may use a particular SID Cluster before it must switch to a different SID Cluster to make f… |
| 1.3.6.1.4.1.4491.2.1.21.1.3.1.17 | ColumndocsQosServiceFlowBufferSize | read-only | current | This attribute specifies the buffer size for the service flow. For the CM this attribute only applies to upstream Service Flows, for the CMTS this attribute on… |
| 1.3.6.1.4.1.4491.2.1.21.1.4 | TabledocsQosServiceFlowStatsTable | not-accessible | current | This object describes statistics associated with the Service Flows in a managed device. |
| 1.3.6.1.4.1.4491.2.1.21.1.4.1 | RowdocsQosServiceFlowStatsEntry | not-accessible | current | The conceptual row of docsQosServiceFlowStatsTable. The ifIndex key corresponds to the MAC Domain interface of the service flow. |
| 1.3.6.1.4.1.4491.2.1.21.1.4.1.1 | ColumndocsQosServiceFlowPkts | read-only | current | For outgoing Service Flows, this attribute counts the number of Packet Data PDUs forwarded to this Service Flow. For incoming upstream CMTS service flows, this… |
| 1.3.6.1.4.1.4491.2.1.21.1.4.1.2 | ColumndocsQosServiceFlowOctets | read-only | current | This attribute indicates the count of the number of octets from the byte after the MAC header HCS to the end of the CRC for all packets counted in the ServiceF… |
| 1.3.6.1.4.1.4491.2.1.21.1.4.1.3 | ColumndocsQosServiceFlowTimeCreated | read-only | current | This attribute indicates the value of sysUpTime when the service flow was created. |
| 1.3.6.1.4.1.4491.2.1.21.1.4.1.4 | ColumndocsQosServiceFlowTimeActive | read-only | current | This attribute indicates the number of seconds that the service flow has been active. This counter's last discontinuity is the ifCounterDiscontinuityTime for o… |
| 1.3.6.1.4.1.4491.2.1.21.1.4.1.5 | ColumndocsQosServiceFlowPHSUnknowns | read-only | current | For incoming upstream CMTS service flows, this attribute counts the number of packets received with an unknown payload header suppression index. The service fl… |
| 1.3.6.1.4.1.4491.2.1.21.1.4.1.6 | ColumndocsQosServiceFlowPolicedDropPkts | read-only | current | For outgoing service flows, this attribute counts the number of Packet Data PDUs classified to this service flow dropped due to: (1) exceeding the selected Buf… |
| 1.3.6.1.4.1.4491.2.1.21.1.4.1.7 | ColumndocsQosServiceFlowPolicedDelayPkts | read-only | current | This attribute counts only outgoing packets delayed in order to maintain the Maximum Sustained Traffic Rate. This attribute will always report a value of 0 for… |
| 1.3.6.1.4.1.4491.2.1.21.1.5 | TabledocsQosUpstreamStatsTable | not-accessible | current | This object describes statistics associated with upstream service flows. All counted frames must be received without a Frame Check Sequence (FCS) error. |
| 1.3.6.1.4.1.4491.2.1.21.1.5.1 | RowdocsQosUpstreamStatsEntry | not-accessible | current | The conceptual row of docsQosUpstreamStatsTable. The ifIndex key corresponds to the upstream logical channel interface of the service flow. A DOCSIS 3.0 CMTS p… |
| 1.3.6.1.4.1.4491.2.1.21.1.5.1.1 | ColumndocsQosSID | not-accessible | current | This key identifies a service ID for an admitted or active upstream service flow. |
| 1.3.6.1.4.1.4491.2.1.21.1.5.1.2 | ColumndocsQosUpstreamFragments | read-only | current | This attribute indicates the number of fragmentation headers received on an upstream service flow, regardless of whether the fragment was correctly reassembled… |
| 1.3.6.1.4.1.4491.2.1.21.1.5.1.3 | ColumndocsQosUpstreamFragDiscards | read-only | current | This attribute indicates the number of upstream fragments discarded and not assembled into a valid upstream packet. This counter's last discontinuity is the if… |
| 1.3.6.1.4.1.4491.2.1.21.1.5.1.4 | ColumndocsQosUpstreamConcatBursts | read-only | current | This attribute indicates the number of concatenation headers received on an upstream service flow. This counter's last discontinuity is the ifCounterDiscontinu… |
| 1.3.6.1.4.1.4491.2.1.21.1.6 | TabledocsQosDynamicServiceStatsTable | not-accessible | current | This object describes statistics associated with the Dynamic Service Flows, Dynamic Channel Changes and Dynamic Bonding Changes in a managed device within a MA… |
| 1.3.6.1.4.1.4491.2.1.21.1.6.1 | RowdocsQosDynamicServiceStatsEntry | not-accessible | current | The conceptual row of docsQosDynamicServiceStatsTable. The ifIndex key corresponds to the MAC Domain interface of the service flow. |
| 1.3.6.1.4.1.4491.2.1.21.1.6.1.1 | ColumndocsQosIfDirection | not-accessible | current | This attribute indicates the interface direction for the instance the statistics are collected. |
| 1.3.6.1.4.1.4491.2.1.21.1.6.1.2 | ColumndocsQosDSAReqs | read-only | current | This attribute indicates the number of Dynamic Service Addition Requests, including retries. Discontinuities in the value of this counter can occur at reinitia… |
| 1.3.6.1.4.1.4491.2.1.21.1.6.1.3 | ColumndocsQosDSARsps | read-only | current | The number of Dynamic Service Addition Responses, including retries. Discontinuities in the value of this counter can occur at reinitialization of the managed … |
| 1.3.6.1.4.1.4491.2.1.21.1.6.1.4 | ColumndocsQosDSAAcks | read-only | current | The number of Dynamic Service Addition Acknowledgements, including retries. Discontinuities in the value of this counter can occur at reinitialization of the m… |
| 1.3.6.1.4.1.4491.2.1.21.1.6.1.5 | ColumndocsQosDSCReqs | read-only | current | The number of Dynamic Service Change Requests, including retries. Discontinuities in the value of this counter can occur at reinitialization of the managed sys… |
| 1.3.6.1.4.1.4491.2.1.21.1.6.1.6 | ColumndocsQosDSCRsps | read-only | current | The number of Dynamic Service Change Responses, including retries. Discontinuities in the value of this counter can occur at reinitialization of the managed sy… |
| 1.3.6.1.4.1.4491.2.1.21.1.6.1.7 | ColumndocsQosDSCAcks | read-only | current | The number of Dynamic Service Change Acknowledgements, including retries. Discontinuities in the value of this counter can occur at reinitialization of the man… |
| 1.3.6.1.4.1.4491.2.1.21.1.6.1.8 | ColumndocsQosDSDReqs | read-only | current | The number of Dynamic Service Delete Requests, including retries. Discontinuities in the value of this counter can occur at reinitialization of the managed sys… |
| 1.3.6.1.4.1.4491.2.1.21.1.6.1.9 | ColumndocsQosDSDRsps | read-only | current | The number of Dynamic Service Delete Responses, including retries. Discontinuities in the value of this counter can occur at reinitialization of the managed sy… |
| 1.3.6.1.4.1.4491.2.1.21.1.6.1.10 | ColumndocsQosDynamicAdds | read-only | current | The number of successful Dynamic Service Addition transactions. Discontinuities in the value of this counter can occur at reinitialization of the managed syste… |
| 1.3.6.1.4.1.4491.2.1.21.1.6.1.11 | ColumndocsQosDynamicAddFails | read-only | current | The number of failed Dynamic Service Addition transactions. Discontinuities in the value of this counter can occur at reinitialization of the managed system, a… |
| 1.3.6.1.4.1.4491.2.1.21.1.6.1.12 | ColumndocsQosDynamicChanges | read-only | current | The number of successful Dynamic Service Change transactions. Discontinuities in the value of this counter can occur at reinitialization of the managed system,… |
| 1.3.6.1.4.1.4491.2.1.21.1.6.1.13 | ColumndocsQosDynamicChangeFails | read-only | current | The number of failed Dynamic Service Change transactions. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and… |
| 1.3.6.1.4.1.4491.2.1.21.1.6.1.14 | ColumndocsQosDynamicDeletes | read-only | current | The number of successful Dynamic Service Delete transactions. Discontinuities in the value of this counter can occur at reinitialization of the managed system,… |
| 1.3.6.1.4.1.4491.2.1.21.1.6.1.15 | ColumndocsQosDynamicDeleteFails | read-only | current | The number of failed Dynamic Service Delete transactions. Discontinuities in the value of this counter can occur at reinitialization of the managed system, and… |
| 1.3.6.1.4.1.4491.2.1.21.1.6.1.16 | ColumndocsQosDCCReqs | read-only | current | The number of Dynamic Channel Change Request messages traversing an interface. This count is nonzero only on downstream direction rows. This count should inclu… |
| 1.3.6.1.4.1.4491.2.1.21.1.6.1.17 | ColumndocsQosDCCRsps | read-only | current | The number of Dynamic Channel Change Response messages traversing an interface. This count is nonzero only on upstream direction rows. This count should includ… |
| 1.3.6.1.4.1.4491.2.1.21.1.6.1.18 | ColumndocsQosDCCAcks | read-only | current | The number of Dynamic Channel Change Acknowledgement messages traversing an interface. This count is nonzero only on downstream direction rows. This count shou… |
| 1.3.6.1.4.1.4491.2.1.21.1.6.1.19 | ColumndocsQosDCCs | read-only | current | The number of successful Dynamic Channel Change transactions. This count is nonzero only on downstream direction rows. Discontinuities in the value of this cou… |
| 1.3.6.1.4.1.4491.2.1.21.1.6.1.20 | ColumndocsQosDCCFails | read-only | current | The number of failed Dynamic Channel Change transactions. This count is nonzero only on downstream direction rows. Discontinuities in the value of this counter… |
| 1.3.6.1.4.1.4491.2.1.21.1.6.1.21 | ColumndocsQosDCCRspDeparts | read-only | current | This attribute contains the number of Dynamic Channel Change Response (depart) messages. It only applies to upstream direction. Discontinuities in the value of… |
| 1.3.6.1.4.1.4491.2.1.21.1.6.1.22 | ColumndocsQosDCCRspArrives | read-only | current | This attribute contains the number of Dynamic Channel Change Response (arrive) messages and should include retries. It only applies to the upstream direction. … |
| 1.3.6.1.4.1.4491.2.1.21.1.6.1.23 | ColumndocsQosDbcReqs | read-only | current | This attribute contains the number of Dynamic Bonding Change Requests, including retries. It only applies to the upstream direction. Discontinuities in the val… |
| 1.3.6.1.4.1.4491.2.1.21.1.6.1.24 | ColumndocsQosDbcRsps | read-only | current | This attribute contains the number of Dynamic Bonding Change Responses, including retries. It only applies to the upstream direction. Discontinuities in the va… |
| 1.3.6.1.4.1.4491.2.1.21.1.6.1.25 | ColumndocsQosDbcAcks | read-only | current | This attribute contains the number of Dynamic Bonding Change Acknowledgements, including retries. It only applies to the downstream direction. Discontinuities … |
| 1.3.6.1.4.1.4491.2.1.21.1.6.1.26 | ColumndocsQosDbcSuccesses | read-only | current | This attribute contains the number of fully successful Dynamic Bonding Change transactions. It only applies to the downstream direction and does not include DB… |
| 1.3.6.1.4.1.4491.2.1.21.1.6.1.27 | ColumndocsQosDbcFails | read-only | current | This attribute contains the number of failed Dynamic Bonding Change transactions. It only applies to the downstream direction. Note that Partial Service is not… |
| 1.3.6.1.4.1.4491.2.1.21.1.6.1.28 | ColumndocsQosDbcPartial | read-only | current | This attribute contains the number of unsuccessful Dynamic Bonding Change transactions that result in Partial Service. IT only applies to the downstream direct… |
| 1.3.6.1.4.1.4491.2.1.21.1.7 | TabledocsQosServiceFlowLogTable | not-accessible | current | This object contains a log of the disconnected Service Flows in a managed device. |
| 1.3.6.1.4.1.4491.2.1.21.1.7.1 | RowdocsQosServiceFlowLogEntry | not-accessible | current | The conceptual row of docsQosServiceFlowLogTable. |
| 1.3.6.1.4.1.4491.2.1.21.1.7.1.1 | ColumndocsQosServiceFlowLogIndex | not-accessible | current | This key indicates an unique index for a logged service flow. |
| 1.3.6.1.4.1.4491.2.1.21.1.7.1.2 | ColumndocsQosServiceFlowLogIfIndex | read-only | current | This attribute indicates the MAC Domain Interface index where the service flow was present. |
| 1.3.6.1.4.1.4491.2.1.21.1.7.1.3 | ColumndocsQosServiceFlowLogSFID | read-only | current | This attribute indicates the identifier assigned to the service flow. |
| 1.3.6.1.4.1.4491.2.1.21.1.7.1.4 | ColumndocsQosServiceFlowLogCmMac | read-only | current | This attribute indicates the MAC address of the cable modem associated with the service flow. |
| 1.3.6.1.4.1.4491.2.1.21.1.7.1.5 | ColumndocsQosServiceFlowLogPkts | read-only | current | This attribute indicates the final value of the Pkts attribute in the ServiceFlowStats object for the service flow. |
| 1.3.6.1.4.1.4491.2.1.21.1.7.1.6 | ColumndocsQosServiceFlowLogOctets | read-only | current | This attribute indicates the final value of the Pkts attribute in the ServiceFlowStats object for the service flow. |
| 1.3.6.1.4.1.4491.2.1.21.1.7.1.7 | ColumndocsQosServiceFlowLogTimeDeleted | read-only | current | This attribute indicates the value of sysUpTime when the service flow was deleted. |
| 1.3.6.1.4.1.4491.2.1.21.1.7.1.8 | ColumndocsQosServiceFlowLogTimeCreated | read-only | current | This attribute indicates the value of sysUpTime when the service flow was created. |
| 1.3.6.1.4.1.4491.2.1.21.1.7.1.9 | ColumndocsQosServiceFlowLogTimeActive | read-only | current | This attribute indicates the total time that the service flow was active. |
| 1.3.6.1.4.1.4491.2.1.21.1.7.1.11 | ColumndocsQosServiceFlowLogDirection | read-only | current | This attribute indicates the value of Service Flow direction for the service flow. |
| 1.3.6.1.4.1.4491.2.1.21.1.7.1.12 | ColumndocsQosServiceFlowLogPrimary | read-only | current | If set to 'true', this attribute indicates that the Service Flow in the log was a Primary Service Flow, otherwise, a Secondary Service Flow. |
| 1.3.6.1.4.1.4491.2.1.21.1.7.1.13 | ColumndocsQosServiceFlowLogServiceClassName | read-only | current | This attribute indicates the value of ServiceClassName for the provisioned QOS Parameter Set of the service flow. |
| 1.3.6.1.4.1.4491.2.1.21.1.7.1.14 | ColumndocsQosServiceFlowLogPolicedDropPkts | read-only | current | This attribute indicates the final value of PolicedDropPkts attribute of the ServiceFlowStats object for the service flow. |
| 1.3.6.1.4.1.4491.2.1.21.1.7.1.15 | ColumndocsQosServiceFlowLogPolicedDelayPkts | read-only | current | This attribute indicates the final value of PolicedDelayPkts attribute of the ServiceFlowStats object for the service flow. |
| 1.3.6.1.4.1.4491.2.1.21.1.7.1.16 | ColumndocsQosServiceFlowLogControl | read-write | current | This attribute when set to 'destroy' removes this instance from the object. Reading this attribute returns the value 'active'. |
| 1.3.6.1.4.1.4491.2.1.21.1.8 | TabledocsQosServiceClassTable | not-accessible | current | This object describes a provisioned service class on a CMTS. Each object instance defines a template for certain DOCSIS QOS Parameter Set values. When a CM cre… |
| 1.3.6.1.4.1.4491.2.1.21.1.8.1 | RowdocsQosServiceClassEntry | not-accessible | current | The conceptual row of docsQosServiceClassTable. |
| 1.3.6.1.4.1.4491.2.1.21.1.8.1.1 | ColumndocsQosServiceClassName | not-accessible | current | This key indicates the Service Class Name associated with this object instance. DOCSIS specifies that the maximum size is 16 ASCII characters including a termi… |
| 1.3.6.1.4.1.4491.2.1.21.1.8.1.3 | ColumndocsQosServiceClassStatus | read-create | current | The conceptual row status of this object. |
| 1.3.6.1.4.1.4491.2.1.21.1.8.1.4 | ColumndocsQosServiceClassPriority | read-create | current | This attribute is the template for the Priority attribute of the QoS Parameter Set. |
| 1.3.6.1.4.1.4491.2.1.21.1.8.1.5 | ColumndocsQosServiceClassMaxTrafficRate | read-create | current | This attribute is the template for the MaxTrafficRate attribute of the QoS Parameter Set. |
| 1.3.6.1.4.1.4491.2.1.21.1.8.1.6 | ColumndocsQosServiceClassMaxTrafficBurst | read-create | current | This attribute is the template for the MaxTrafficBurst attribute of the QoS Parameter Set. |
| 1.3.6.1.4.1.4491.2.1.21.1.8.1.7 | ColumndocsQosServiceClassMinReservedRate | read-create | current | This attribute is the template for the MinReservedRate attribute of the QoS Parameter Set. |
| 1.3.6.1.4.1.4491.2.1.21.1.8.1.8 | ColumndocsQosServiceClassMinReservedPkt | read-create | current | This attribute is the template for the MinReservedPkt attribute of the QoS Parameter Set. |
| 1.3.6.1.4.1.4491.2.1.21.1.8.1.9 | ColumndocsQosServiceClassMaxConcatBurst | read-create | current | This attribute is the template for the MaxConcatBurst attribute of the QoS Parameter Set. |
| 1.3.6.1.4.1.4491.2.1.21.1.8.1.10 | ColumndocsQosServiceClassNomPollInterval | read-create | current | This attribute is the template for the NomPollInterval attribute of the QoS Parameter Set. |
| 1.3.6.1.4.1.4491.2.1.21.1.8.1.11 | ColumndocsQosServiceClassTolPollJitter | read-create | current | This attribute is the template for the TolPolJitter attribute of the QoS Parameter Set. |
| 1.3.6.1.4.1.4491.2.1.21.1.8.1.12 | ColumndocsQosServiceClassUnsolicitGrantSize | read-create | current | This attribute is the template for the UnsolicitGrantSize attribute of the QoS Parameter Set. |
| 1.3.6.1.4.1.4491.2.1.21.1.8.1.13 | ColumndocsQosServiceClassNomGrantInterval | read-create | current | This attribute is the template for the NomGrantInterval attribute of the QoS Parameter Set. |
| 1.3.6.1.4.1.4491.2.1.21.1.8.1.14 | ColumndocsQosServiceClassTolGrantJitter | read-create | current | This attribute is the template for the TolGrantJitter attribute of the QoS Parameter Set. |
| 1.3.6.1.4.1.4491.2.1.21.1.8.1.15 | ColumndocsQosServiceClassGrantsPerInterval | read-create | current | This attribute is the template for the GrantsPerInterval attribute of the QoS Parameter Set. |
| 1.3.6.1.4.1.4491.2.1.21.1.8.1.16 | ColumndocsQosServiceClassMaxLatency | read-create | current | This attribute is the template for the MaxLatency attribute of the QoS Parameter Set. |
| 1.3.6.1.4.1.4491.2.1.21.1.8.1.17 | ColumndocsQosServiceClassActiveTimeout | read-create | current | This attribute is the template for the ActiveTimeout attribute of the QoS Parameter Set. |
| 1.3.6.1.4.1.4491.2.1.21.1.8.1.18 | ColumndocsQosServiceClassAdmittedTimeout | read-create | current | This attribute is the template for the AddmitedTimeout attribute of the QoS Parameter Set. |
| 1.3.6.1.4.1.4491.2.1.21.1.8.1.19 | ColumndocsQosServiceClassSchedulingType | read-create | current | This attribute is the template for the SchedulingType attribute of the QoS Parameter Set. |
| 1.3.6.1.4.1.4491.2.1.21.1.8.1.20 | ColumndocsQosServiceClassRequestPolicy | read-create | current | This attribute is the template for the ReqPolicyOct attribute of the QoS Parameter Set. |
| 1.3.6.1.4.1.4491.2.1.21.1.8.1.21 | ColumndocsQosServiceClassTosAndMask | read-create | current | This attribute is the template for the TosAndMask attribute of the QoS Parameter Set. |
| 1.3.6.1.4.1.4491.2.1.21.1.8.1.22 | ColumndocsQosServiceClassTosOrMask | read-create | current | This attribute is the template for the TosOrMask attribute of the QoS Parameter Set. |
| 1.3.6.1.4.1.4491.2.1.21.1.8.1.23 | ColumndocsQosServiceClassDirection | read-create | current | This attribute is the template for the Direction attribute of the QoS Parameter Set. |
| 1.3.6.1.4.1.4491.2.1.21.1.8.1.24 | ColumndocsQosServiceClassStorageType | read-create | current | This attribute defines whether this row is kept in volatile storage and lost upon reboot or whether it is backed up by non-volatile or permanent storage. 'perm… |
| 1.3.6.1.4.1.4491.2.1.21.1.8.1.25 | ColumndocsQosServiceClassDSCPOverwrite | read-create | current | This attribute allows the overwrite of the DSCP field per RFC 3260. If this attribute is -1, then the corresponding TosAndMask value is set to be 'FF'H and Tos… |
| 1.3.6.1.4.1.4491.2.1.21.1.8.1.26 | ColumndocsQosServiceClassRequiredAttrMask | read-create | current | This attribute is the template for the RequiredAttrMask attribute of the QoS Parameter Set. |
| 1.3.6.1.4.1.4491.2.1.21.1.8.1.27 | ColumndocsQosServiceClassForbiddenAttrMask | read-create | current | This attribute is the template for the ForbiddenAttrMask attribute of the QoS Parameter Set. |
| 1.3.6.1.4.1.4491.2.1.21.1.8.1.28 | ColumndocsQosServiceClassAttrAggrRuleMask | read-create | current | This attribute is the template for the AttrAggregationMask attribute of the QoS Parameter Set. |
| 1.3.6.1.4.1.4491.2.1.21.1.8.1.29 | ColumndocsQosServiceClassAppId | read-create | current | This attribute is the template for the AppId attribute of the QoS Parameter Set. |
| 1.3.6.1.4.1.4491.2.1.21.1.8.1.30 | ColumndocsQosServiceClassMultiplierContentionReqWindow | read-create | current | This attribute is the template for the MultiplierContentionReqWindow attribute of the QoS Parameter Set. |
| 1.3.6.1.4.1.4491.2.1.21.1.8.1.31 | ColumndocsQosServiceClassMultiplierBytesReq | read-create | current | This attribute is the template for the MultiplierBytesReq attribute of the QoS Parameter Set. |
| 1.3.6.1.4.1.4491.2.1.21.1.8.1.32 | ColumndocsQosServiceClassMaxReqPerSidCluster | read-create | deprecated | This attribute is the template for the MaxReqPerSidCluster attribute of the QoS Parameter Set. This attribute has been deprecated and replaced with docsQosServ… |
| 1.3.6.1.4.1.4491.2.1.21.1.8.1.33 | ColumndocsQosServiceClassMaxOutstandingBytesPerSidCluster | read-create | deprecated | This attribute is the template for the MaxOutstandingBytesPerSidCluster attribute of the QoS Parameter Set. This attribute has been deprecated and replaced wit… |
| 1.3.6.1.4.1.4491.2.1.21.1.8.1.34 | ColumndocsQosServiceClassMaxTotBytesReqPerSidCluster | read-create | deprecated | This attribute is the template for the MaxTotBytesReqPerSidCluster attribute of the QoS Parameter Set. This attribute has been deprecated and replaced with doc… |
| 1.3.6.1.4.1.4491.2.1.21.1.8.1.35 | ColumndocsQosServiceClassMaxTimeInSidCluster | read-create | deprecated | This attribute is the template for the MaxTimeInSidCluster attribute of the QoS Parameter Set. This attribute has been deprecated and replaced with docsQosServ… |
| 1.3.6.1.4.1.4491.2.1.21.1.8.1.36 | ColumndocsQosServiceClassPeakTrafficRate | read-create | current | This attribute is the template for the PeakTrafficRate attribute of the QoS Parameter Set. |
| 1.3.6.1.4.1.4491.2.1.21.1.8.1.37 | ColumndocsQosServiceClassDsResequencing | read-create | current | This attribute is the template for the DsResequencing attribute of the QoS Parameter Set. |
| 1.3.6.1.4.1.4491.2.1.21.1.8.1.38 | ColumndocsQosServiceClassMinimumBuffer | read-create | current | This attribute is the template for the MinimumBuffer attribute of the QoS Parameter Set. |
| 1.3.6.1.4.1.4491.2.1.21.1.8.1.39 | ColumndocsQosServiceClassTargetBuffer | read-create | current | This attribute is the template for the TargetBuffer attribute of the QoS Parameter Set. |
| 1.3.6.1.4.1.4491.2.1.21.1.8.1.40 | ColumndocsQosServiceClassMaximumBuffer | read-create | current | This attribute is the template for the MaximumBuffer attribute of the QoS Parameter Set. |
| 1.3.6.1.4.1.4491.2.1.21.1.10 | TabledocsQosPHSTable | not-accessible | current | This object describes the set of payload header suppression of Service Flows. |
| 1.3.6.1.4.1.4491.2.1.21.1.10.1 | RowdocsQosPHSEntry | not-accessible | current | The conceptual row of docsQosPHSTable. The ifIndex key corresponds to the MAC Domain interface of the service flow of the classifier that includes this PHS rul… |
| 1.3.6.1.4.1.4491.2.1.21.1.10.1.2 | ColumndocsQosPHSField | read-only | current | This attribute indicates the Payload Header suppression field defines the bytes of the header that must be suppressed/restored by the sending/receiving device.… |
| 1.3.6.1.4.1.4491.2.1.21.1.10.1.3 | ColumndocsQosPHSMask | read-only | current | This attribute defines the bit mask that is used in combination with the PHSField. It defines which bytes in the header must be suppressed/restored by the send… |
| 1.3.6.1.4.1.4491.2.1.21.1.10.1.4 | ColumndocsQosPHSSize | read-only | current | This attribute specifies the number of bytes in the header to be suppressed and restored. The value of this attribute matches the number of bytes in the Field … |
| 1.3.6.1.4.1.4491.2.1.21.1.10.1.5 | ColumndocsQosPHSVerify | read-only | current | If 'true', this attribute indicates that the sender must verify that the PHS Field is the same as the content in the packet to be suppressed. |
| 1.3.6.1.4.1.4491.2.1.21.1.10.1.7 | ColumndocsQosPHSIndex | read-only | current | This attribute uniquely references the PHS rule for a given service flow. |
| 1.3.6.1.4.1.4491.2.1.21.1.11 | TabledocsQosCmtsMacToSrvFlowTable | not-accessible | current | This object provides the mapping of unicast service flows with the cable modem the service flows belongs to. |
| 1.3.6.1.4.1.4491.2.1.21.1.11.1 | RowdocsQosCmtsMacToSrvFlowEntry | not-accessible | current | The conceptual row of docsQosCmtsMacToSrvFlowTable. |
| 1.3.6.1.4.1.4491.2.1.21.1.11.1.1 | ColumndocsQosCmtsCmMac | not-accessible | current | This key represents the MAC address for the referenced CM. |
| 1.3.6.1.4.1.4491.2.1.21.1.11.1.2 | ColumndocsQosCmtsServiceFlowId | not-accessible | current | This key represents the identifier of the Service Flow. |
| 1.3.6.1.4.1.4491.2.1.21.1.11.1.3 | ColumndocsQosCmtsIfIndex | read-only | current | This attribute represents the interface index of the MAC domain of the Service Flow and where the CableModem is registered. |
| 1.3.6.1.4.1.4491.2.1.21.1.12 | TabledocsQosServiceFlowSidClusterTable | not-accessible | current | This object defines the SID clusters associated with an upstream service flow. |
| 1.3.6.1.4.1.4491.2.1.21.1.12.1 | RowdocsQosServiceFlowSidClusterEntry | not-accessible | current | The conceptual row of docsQosServiceFlowSidClusterTable. The ifIndex key corresponds to the MAC Domain interface of the service flow. |
| 1.3.6.1.4.1.4491.2.1.21.1.12.1.1 | ColumndocsQosServiceFlowSidClusterId | not-accessible | current | This key represents the SID Cluster ID of the SID Cluster. |
| 1.3.6.1.4.1.4491.2.1.21.1.12.1.2 | ColumndocsQosServiceFlowSidClusterUcid | not-accessible | current | This key represents the upstream Channel ID mapped to the corresponding SID. |
| 1.3.6.1.4.1.4491.2.1.21.1.12.1.3 | ColumndocsQosServiceFlowSidClusterSid | read-only | current | This attribute represents the SID assigned to the upstream channel in this SID Cluster. |
| 1.3.6.1.4.1.4491.2.1.21.1.13 | TabledocsQosGrpServiceFlowTable | not-accessible | current | This object provides extensions to the service flow information for Group Service Flows (GSFs). |
| 1.3.6.1.4.1.4491.2.1.21.1.13.1 | RowdocsQosGrpServiceFlowEntry | not-accessible | current | The conceptual row of docsQosGrpServiceFlowTable. The ifIndex key corresponds to the MAC Domain interface of the group service flow. |
| 1.3.6.1.4.1.4491.2.1.21.1.13.1.1 | ColumndocsQosGrpServiceFlowIsDef | read-only | current | This attribute indicates whether the GSF QOS Parameter Set corresponds to the Default Group Service Flow. |
| 1.3.6.1.4.1.4491.2.1.21.1.13.1.2 | ColumndocsQosGrpServiceFlowQosConfigId | read-only | current | This attribute indicates the Group QoS Configuration (GQC) identifier used of the creation of this GSF. The value zero indicates that the Service Flow is using… |
| 1.3.6.1.4.1.4491.2.1.21.1.13.1.3 | ColumndocsQosGrpServiceFlowNumSess | read-only | current | This attribute indicates the number of sessions that are configured in an aggregated Service Flow. If this is a single session replication, the value of this a… |
| 1.3.6.1.4.1.4491.2.1.21.1.13.1.4 | ColumndocsQosGrpServiceFlowSrcAddr | read-only | current | This attribute specifies the specific multicast Source Address that is configured in a single session Service Flow. If this is an aggregate Service Flow (NumSe… |
| 1.3.6.1.4.1.4491.2.1.21.1.13.1.5 | ColumndocsQosGrpServiceFlowGrpAddr | read-only | current | This attribute specifies the specific Multicast Group Address that is configured in a single session Service Flow. If this is an aggregate Service Flow (NumSes… |
| 1.3.6.1.4.1.4491.2.1.21.1.14 | TabledocsQosGrpPktClassTable | not-accessible | current | This object provides additional packet classification information for Group Classifier References (GCRs) in a Group Service Flow (GSF). |
| 1.3.6.1.4.1.4491.2.1.21.1.14.1 | RowdocsQosGrpPktClassEntry | not-accessible | current | The conceptual row of docsQosGrpPktClassTable. The ifIndex key corresponds to the MAC Domain interface of the service flow of this group classifier. |
| 1.3.6.1.4.1.4491.2.1.21.1.14.1.1 | ColumndocsQosGrpPktClassGrpConfigId | read-only | current | This attribute indicates the GC identifier used of the creation of this GSF. |
| 1.3.6.1.4.1.4491.2.1.21.1.15 | TabledocsQosUpChCounterExtTable | not-accessible | current | This object provides extensions for service flow statistics for fragmentation for channel bonding. |
| 1.3.6.1.4.1.4491.2.1.21.1.15.1 | RowdocsQosUpChCounterExtEntry | not-accessible | current | The conceptual row of docsQosUpChCounterExtTable. The ifIndex key corresponds to the upstream Channel Interface of the service flow. |
| 1.3.6.1.4.1.4491.2.1.21.1.15.1.1 | ColumndocsQosUpChCounterExtSgmtValids | read-only | current | This attribute represents the total number segments processed on this channel. Discontinuities in the value of this counter can occur at reinitialization of th… |
| 1.3.6.1.4.1.4491.2.1.21.1.15.1.2 | ColumndocsQosUpChCounterExtSgmtDiscards | read-only | current | This attribute represents the total number of discarded segments on this channel due to segment HCS problems. Discontinuities in the value of this counter can … |
| 1.3.6.1.4.1.4491.2.1.21.1.16 | TabledocsQosServiceFlowCcfStatsTable | not-accessible | current | This object provides upstream service flow statistics for Continuous Concatenation and Fragmentation (CCF). The CMTS may choose to not instantiate this object … |
| 1.3.6.1.4.1.4491.2.1.21.1.16.1 | RowdocsQosServiceFlowCcfStatsEntry | not-accessible | current | The conceptual row of docsQosServiceFlowCcfStatsTable. The ifIndex key corresponds to the MAC Domain interface of the service flow. |
| 1.3.6.1.4.1.4491.2.1.21.1.16.1.1 | ColumndocsQosServiceFlowCcfStatsSgmtValids | read-only | current | This attribute contains the number of segments counted on this service flow regardless of whether the fragment was correctly reassembled into valid packets. Th… |
| 1.3.6.1.4.1.4491.2.1.21.1.16.1.2 | ColumndocsQosServiceFlowCcfStatsSgmtLost | read-only | current | This attribute counts the number of segments which the CMTS segment reassembly function determines were lost. This attribute only gathers information for Segme… |
| 1.3.6.1.4.1.4491.2.1.21.1.17 | TabledocsQosCmServiceUsStatsTable | not-accessible | current | This object defines DOCSIS MAC services primitive statistics of upstream service flows. In pre-3.0 DOCSIS devices this statistics exists per SID for either Cos… |
| 1.3.6.1.4.1.4491.2.1.21.1.17.1 | RowdocsQosCmServiceUsStatsEntry | not-accessible | current | The conceptual row of docsQosCmServiceUsStatsTable. The ifIndex key corresponds to the MAC Domain interface of the service flow. |
| 1.3.6.1.4.1.4491.2.1.21.1.17.1.1 | ColumndocsQosCmServiceUsStatsTxSlotsImmed | read-only | current | This attribute contains the number of upstream mini-slots which have been used to transmit data PDUs in immediate (contention) mode. This includes only those P… |
| 1.3.6.1.4.1.4491.2.1.21.1.17.1.2 | ColumndocsQosCmServiceUsStatsTxSlotsDed | read-only | current | This attribute contains the number of upstream mini-slots which have been used to transmit data PDUs in dedicated mode (i.e., as a result of a unicast Data Gra… |
| 1.3.6.1.4.1.4491.2.1.21.1.17.1.3 | ColumndocsQosCmServiceUsStatsTxRetries | read-only | current | This attribute contains the number of attempts to transmit data PDUs containing requests for acknowledgment that did not result in acknowledgment. Discontinuit… |
| 1.3.6.1.4.1.4491.2.1.21.1.17.1.4 | ColumndocsQosCmServiceUsStatsTxExceededs | read-only | current | This attribute contains the number of attempts to transmit bandwidth requests which did not result in acknowledgment. Discontinuities in the value of this coun… |
| 1.3.6.1.4.1.4491.2.1.21.1.17.1.5 | ColumndocsQosCmServiceUsStatsRqRetries | read-only | current | This attribute contains the number of attempts to transmit bandwidth requests which did not result in acknowledgment. Discontinuities in the value of this coun… |
| 1.3.6.1.4.1.4491.2.1.21.1.17.1.6 | ColumndocsQosCmServiceUsStatsRqExceededs | read-only | current | This attribute contains the number of requests for bandwidth which failed due to excessive retries without acknowledgment. Discontinuities in the value of this… |
| 1.3.6.1.4.1.4491.2.1.21.1.17.1.7 | ColumndocsQosCmServiceUsStatsSgmts | read-only | current | This attribute contains the number of segments sent on this service flow. Discontinuities in the value of this counter can occur at reinitialization of the man… |
| 1.3.6.1.4.1.4491.2.1.21.1.18 | TabledocsQosCmtsDsidTable | not-accessible | current | This object describes DSID information stored in the CMTS. The CMTS reports the current status of existing DSIDs. When a DSID is created during the registratio… |
| 1.3.6.1.4.1.4491.2.1.21.1.18.1 | RowdocsQosCmtsDsidEntry | not-accessible | current | The conceptual row of docsQosCmtsDsidTable. The ifIndex key corresponds to the MAC Domain interface of the DSID. |
| 1.3.6.1.4.1.4491.2.1.21.1.18.1.1 | ColumndocsQosCmtsDsidDsid | not-accessible | current | This key represents the DSID. |
| 1.3.6.1.4.1.4491.2.1.21.1.18.1.2 | ColumndocsQosCmtsDsidUsage | read-only | current | This attribute indicates the properties of the DSID. The bits are defined as follows: 'resequencing' This bit is set to 1 for a Resequencing DSID. 'multicastCa… |
| 1.3.6.1.4.1.4491.2.1.21.1.18.1.3 | ColumndocsQosCmtsDsidDsChSet | read-only | current | This attribute represents the Downstream Channel Set over which the DSID is being resequenced. |
| 1.3.6.1.4.1.4491.2.1.21.1.18.1.4 | ColumndocsQosCmtsDsidReseqWaitTime | read-only | current | This attribute represents the DSID Resequencing Wait Time that is used for this DSID. This attribute is only valid when the Usage attribute has the resequencin… |
| 1.3.6.1.4.1.4491.2.1.21.1.18.1.5 | ColumndocsQosCmtsDsidReseqWarnThrshld | read-only | current | This attribute represents the DSID Resequencing Warning Threshold that is used for this DSID. The value of 0 indicates that the threshold warnings are disabled… |
| 1.3.6.1.4.1.4491.2.1.21.1.18.1.6 | ColumndocsQosCmtsDsidStatusHldoffTimerSeqOutOfRng | read-only | current | This attribute represents the hold-off timer for reporting Out-of-Range Events via the CM-STATUS MAC Management message. This attribute is only valid when the … |
| 1.3.6.1.4.1.4491.2.1.21.1.18.1.7 | ColumndocsQosCmtsDsidCurrentSeqNum | read-only | current | This attribute reports the value of the most recent sequence number assigned by the CMTS for this DSID. This attribute is only valid when the Usage attribute h… |
| 1.3.6.1.4.1.4491.2.1.21.1.19 | TabledocsQosCmtsDebugDsidTable | not-accessible | current | The CMTS Debug DSID object contains the control of DSID debug statistics reporting An instance in this object defines the DSID and MAC domain to which the Cmts… |
| 1.3.6.1.4.1.4491.2.1.21.1.19.1 | RowdocsQosCmtsDebugDsidEntry | not-accessible | current | The conceptual row of docsQosCmtsDebugDsidTable. The ifIndex key corresponds to the MAC Domain interface of the DSID. |
| 1.3.6.1.4.1.4491.2.1.21.1.19.1.1 | ColumndocsQosCmtsDebugDsidDsid | not-accessible | current | This attribute represents the DSID value to be debugged, identified by the IfIndex attribute of this object. |
| 1.3.6.1.4.1.4491.2.1.21.1.19.1.2 | ColumndocsQosCmtsDebugDsidRowStatus | read-create | current | The conceptual row status of this object. |
| 1.3.6.1.4.1.4491.2.1.21.1.20 | TabledocsQosCmtsDebugDsidStatsTable | not-accessible | current | The CMTS Debug DSID Stats object describes statistics at the CMTS for the forwarding of DSID-labeled downstream packets. The CMTS creates an instance for every… |
| 1.3.6.1.4.1.4491.2.1.21.1.20.1 | RowdocsQosCmtsDebugDsidStatsEntry | not-accessible | current | The conceptual row of docsQosCmtsDebugDsidStatsTable. The ifIndex key corresponds to the MAC Domain interface of the DSID. |
| 1.3.6.1.4.1.4491.2.1.21.1.20.1.1 | ColumndocsQosCmtsDebugDsidStatsDsIfIndex | not-accessible | current | This key represents an interface index of a downstream channel that belongs to the DSID |
| 1.3.6.1.4.1.4491.2.1.21.1.20.1.2 | ColumndocsQosCmtsDebugDsidStatsDsidPackets | read-only | current | This attribute is a counter which contains the number of packets transmitted by the CMTS which are labeled with the DSID on the downstream channel. Discontinui… |
| 1.3.6.1.4.1.4491.2.1.21.1.20.1.3 | ColumndocsQosCmtsDebugDsidStatsDsidOctets | read-only | current | This attribute counts the number of bytes transmitted by the CMTS which are labeled with the DSID on the downstream interface. Discontinuities in the value of … |
| 1.3.6.1.4.1.4491.2.1.21.1.21 | TabledocsQosCmDsidTable | not-accessible | current | When a DSID is created, during the registration process or a DBC transaction,. The CM reports the current status of existing DSID, for example, if a DSID is de… |
| 1.3.6.1.4.1.4491.2.1.21.1.21.1 | RowdocsQosCmDsidEntry | not-accessible | current | The conceptual row of docsQosCmDsidTable The ifIndex key corresponds to the MAC Domain interface of the DSID. |
| 1.3.6.1.4.1.4491.2.1.21.1.21.1.1 | ColumndocsQosCmDsidDsid | not-accessible | current | This key represents the DSID. |
| 1.3.6.1.4.1.4491.2.1.21.1.21.1.2 | ColumndocsQosCmDsidUsage | read-only | current | This attribute indicates the properties of the DSID. The bits are defined as follows: 'resequencing' : This bit is set to 1 for a Resequencing DSID. 'multicast… |
| 1.3.6.1.4.1.4491.2.1.21.1.21.1.3 | ColumndocsQosCmDsidNumReseqChs | read-only | current | This attribute represents the number of channels in the downstream resequencing channel list for this DSID. When a DSID is used only for a non-bonded Multicast… |
| 1.3.6.1.4.1.4491.2.1.21.1.21.1.4 | ColumndocsQosCmDsidReseqChList | read-only | current | This attribute represents the Downstream Channel Set over which the DSID is being resequenced. |
| 1.3.6.1.4.1.4491.2.1.21.1.21.1.5 | ColumndocsQosCmDsidReseqWaitTime | read-only | current | This attribute represents the DSID Resequencing Wait Time that is used for this DSID. This attribute is only valid when the Usage attribute has the resequencin… |
| 1.3.6.1.4.1.4491.2.1.21.1.21.1.6 | ColumndocsQosCmDsidReseqWarnThrshld | read-only | current | This attribute represents the DSID Resequencing Warning Threshold that is used for this DSID. The value of 0 indicates that the threshold warnings are disabled… |
| 1.3.6.1.4.1.4491.2.1.21.1.21.1.7 | ColumndocsQosCmDsidStatusHldoffTimerSeqOutOfRng | read-only | current | This attribute represents the hold-off timer for reporting Out-of-Range Events via the CM-STATUS MAC Management message. This attribute is only valid when the … |
| 1.3.6.1.4.1.4491.2.1.21.1.21.1.8 | ColumndocsQosCmDsidOutOfRangeDiscards | read-only | current | This attribute represents the current count of out-of-range packets discarded by the CM for a given resequencing context since an in-range packet was received.… |
| 1.3.6.1.4.1.4491.2.1.21.1.21.1.9 | ColumndocsQosCmDsidNextExpectedSeqNum | read-only | current | This attribute represents the Next Expected Packet Sequence Number for a given resequencing context. This attribute is only valid when the Usage attribute has … |
| 1.3.6.1.4.1.4491.2.1.21.1.21.1.10 | ColumndocsQosCmDsidCmInterfaceMask | read-only | current | This attribute represents the bitmap of the interfaces communicated to the CM in a Multicast DSID encoding. |
| 1.3.6.1.4.1.4491.2.1.21.1.21.1.11 | ColumndocsQosCmDsidFwdCmInterfaceMask | read-only | current | This attribute represents the bitmap of the interfaces to which the CM forwards multicast traffic: a logical OR of interfaces identified in CmInterfaceMask and… |
| 1.3.6.1.4.1.4491.2.1.21.1.22 | TabledocsQosCmDsidStatsTable | not-accessible | current | This object defines a set of statistics the CM collects per Dsid. |
| 1.3.6.1.4.1.4491.2.1.21.1.22.1 | RowdocsQosCmDsidStatsEntry | not-accessible | current | The conceptual row of docsQosCmDsidStatsTable. |
| 1.3.6.1.4.1.4491.2.1.21.1.22.1.1 | ColumndocsQosCmDsidStatsDsid | not-accessible | current | This key represents the interface index of the MAC Domain associated with the DSID. |
| 1.3.6.1.4.1.4491.2.1.21.1.22.1.2 | ColumndocsQosCmDsidStatsSeqNumMissing | read-only | current | This attribute counts the number of times the Next Expected Packet Sequence Number is declared lost. In this case one or more data packets are lost. This is ge… |
| 1.3.6.1.4.1.4491.2.1.21.1.22.1.3 | ColumndocsQosCmDsidStatsSkewThreshExceeds | read-only | current | This attribute counts in-range sequenced packets which were successfully received by the CM after a wait time longer than the Resequencing Warning Threshold. |
| 1.3.6.1.4.1.4491.2.1.21.1.22.1.4 | ColumndocsQosCmDsidStatsOutOfRangePackets | read-only | current | This attribute counts the number of packets Counter received in a DSID reassembly context where the sequence number which is out of range. |
| 1.3.6.1.4.1.4491.2.1.21.1.22.1.5 | ColumndocsQosCmDsidStatsNumPackets | read-only | current | This attribute counts the total number of data packets of a DSID context forwarded for further processing. |
| 1.3.6.1.4.1.4491.2.1.21.1.23 | TabledocsQosCmDsidClientTable | not-accessible | current | This object contains the client MAC addresses that the CMTS requests that the CM uses to replicate Multicast DSIDs during registration or during a DBC transact… |
| 1.3.6.1.4.1.4491.2.1.21.1.23.1 | RowdocsQosCmDsidClientEntry | not-accessible | current | The conceptual row of docsQosCmDsidClientTable. |
| 1.3.6.1.4.1.4491.2.1.21.1.23.1.1 | ColumndocsQosCmDsidClientDsid | not-accessible | current | This key defines the DSID that the client MAC addresses are associated with. |
| 1.3.6.1.4.1.4491.2.1.21.1.23.1.2 | ColumndocsQosCmDsidClientClientMacId | not-accessible | current | This key defines a uniquely identified Client Mac Addresses associated with the DSID. |
| 1.3.6.1.4.1.4491.2.1.21.1.23.1.3 | ColumndocsQosCmDsidClientClientMacAddr | read-only | current | This attribute defines a client MAC address to which Multicast traffic labeled with this DSID should be forwarded. |
| 1.3.6.1.4.1.4491.2.1.21.2 | NodedocsQosMibConformance | |||
| 1.3.6.1.4.1.4491.2.1.21.2.1 | NodedocsQosMibCompliances | |||
| 1.3.6.1.4.1.4491.2.1.21.2.1.1 | CompliancedocsQosCompliance | current | The compliance statement of managed objects common for Cable Modem Termination Systems (CMTS) and Cable Modems (CM). | |
| 1.3.6.1.4.1.4491.2.1.21.2.2 | NodedocsQosMibGroups | |||
| 1.3.6.1.4.1.4491.2.1.21.2.2.1 | GroupdocsQosBaseGroup | current | Group of objects implemented in both CM and CMTS. | |
| 1.3.6.1.4.1.4491.2.1.21.2.2.2 | GroupdocsQosCmtsGroup | current | Group of objects implemented in the CMTS only. | |
| 1.3.6.1.4.1.4491.2.1.21.2.2.3 | GroupdocsQosCmGroup | current | Group of objects implemented in the CM only. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| BitRate | Unsigned32 | current | The rate of traffic in unit of bits per second. Used to specify traffic rate for QOS. |
| SchedulingType | INTEGER { undefined (1), bestEffort (2), nonRealTimePollingService(3), realTimePollingService(4), unsolictedGrantServiceWithAD(5), unsolictedGrantService(6) } | current | The scheduling service provided by a CMTS for an upstream Service Flow. If the parameter is omitted from an upstream QOS Parameter Set, this object takes the value of bestEffort (2). This parameter must be reported as u… |