E5-110-AESCOMMON-MIB
52 objects
No module-level DESCRIPTION found.
Imported Objects
| E5-110-MIB | aesSeriesCommon |
| RFC-1212 | OBJECT-TYPE |
| RFC1213-MIB | DisplayString ifIndex |
| SNMPv2-SMI | Unsigned32 |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6321.1.2.3.1.97.1 | ScalaraesMaxNumOfProfiles | read-only | current | The maximum number of ADSL profiles which the system supports. |
| 1.3.6.1.4.1.6321.1.2.3.1.97.2 | TableaesLineConfTable | not-accessible | current | This table includes common attributes describing the ADSL line. |
| 1.3.6.1.4.1.6321.1.2.3.1.97.2.1 | RowaesLineConfEntry | not-accessible | current | An entry in aesLineConfTable. |
| 1.3.6.1.4.1.6321.1.2.3.1.97.2.1.1 | ColumnaesLineConfAdslMode | read-write | current | The mode of the ADSL line. |
| 1.3.6.1.4.1.6321.1.2.3.1.97.2.1.2 | ColumnaesLineConfEncap | read-write | current | The encapsulation of the ADSL line. |
| 1.3.6.1.4.1.6321.1.2.3.1.97.2.1.3 | ColumnaesLineConfVpi | read-write | current | The VPI of the ADSL line. |
| 1.3.6.1.4.1.6321.1.2.3.1.97.2.1.4 | ColumnaesLineConfVci | read-write | current | The VCI of the ADSL line. |
| 1.3.6.1.4.1.6321.1.2.3.1.97.2.1.5 | ColumnaesLineConfAnnexL | read-write | current | The annex L setting of the ADSL line(Only in AnnexA). |
| 1.3.6.1.4.1.6321.1.2.3.1.97.2.1.6 | ColumnaesLineConfPmMode | read-write | current | The power management mode of the ADSL line. |
| 1.3.6.1.4.1.6321.1.2.3.1.97.2.1.7 | ColumnaesLineConfRateMode | read-write | current | Defines what form of transmit rate adaptation is configured on this modem. See ADSL Forum TR-005 [3] for more information. |
| 1.3.6.1.4.1.6321.1.2.3.1.97.2.1.8 | ColumnaesLineConfAnnexM | read-write | current | The annex M setting of the ADSL line. |
| 1.3.6.1.4.1.6321.1.2.3.1.97.3 | NodeaesLineDiagnostic | |||
| 1.3.6.1.4.1.6321.1.2.3.1.97.3.1 | ScalaraesAtucLineDiagLATN | read-only | current | Line Attenuation. |
| 1.3.6.1.4.1.6321.1.2.3.1.97.3.2 | ScalaraesAtucLineDiagSATN | read-only | current | Signal Attenuation. |
| 1.3.6.1.4.1.6321.1.2.3.1.97.3.3 | ScalaraesAtucLineDiagSNRM | read-only | current | Signal-to-Noise Ratio Margin. |
| 1.3.6.1.4.1.6321.1.2.3.1.97.3.4 | ScalaraesAtucLineDiagACTATP | read-only | current | Actual Aggregate Transmit Power. |
| 1.3.6.1.4.1.6321.1.2.3.1.97.3.5 | ScalaraesAtucLineDiagATTNDR | read-only | current | Attainable Net Data Rate, in bps. |
| 1.3.6.1.4.1.6321.1.2.3.1.97.3.6 | ScalaraesAturLineDiagLATN | read-only | current | Line Attenuation. |
| 1.3.6.1.4.1.6321.1.2.3.1.97.3.7 | ScalaraesAturLineDiagSATN | read-only | current | Signal Attenuation. |
| 1.3.6.1.4.1.6321.1.2.3.1.97.3.8 | ScalaraesAturLineDiagSNRM | read-only | current | Signal-to-Noise Ratio Margin. |
| 1.3.6.1.4.1.6321.1.2.3.1.97.3.9 | ScalaraesAturLineDiagACTATP | read-only | current | Actual Aggregate Transmit Power. |
| 1.3.6.1.4.1.6321.1.2.3.1.97.3.10 | ScalaraesAturLineDiagATTNDR | read-only | current | Attainable Net Data Rate, in bps. |
| 1.3.6.1.4.1.6321.1.2.3.1.97.3.11 | ScalaraesLineDiagTarget | read-write | current | Ifindex of the ADSL port which will be diagnosed. |
| 1.3.6.1.4.1.6321.1.2.3.1.97.3.12 | ScalaraesLineDiagOps | read-write | current | The manager sets the object to one to start line diagnostics and the agent clears the object to zero when diagnostics is successfully completed. |
| 1.3.6.1.4.1.6321.1.2.3.1.97.3.13 | ScalaraesLineDiagFailReason | read-only | current | The reason of failed diagnostics. |
| 1.3.6.1.4.1.6321.1.2.3.1.97.4 | NodeaesLineDiagPs | |||
| 1.3.6.1.4.1.6321.1.2.3.1.97.4.1 | ScalaraesAtucNumOfSubcarriersPerPort | read-only | current | The number of subcarriers per port for ATU-C. |
| 1.3.6.1.4.1.6321.1.2.3.1.97.4.2 | ScalaraesAturNumOfSubcarriersPerPort | read-only | current | The number of subcarriers per port for ATU-R. |
| 1.3.6.1.4.1.6321.1.2.3.1.97.4.3 | ScalaraesLineDiagPsCCFLirl1 | read-only | current | Channel Characteristics Function H(f) per subcarrier. The value is the real part of a complex value in liner scale. The first two octets specify the li.rl valu… |
| 1.3.6.1.4.1.6321.1.2.3.1.97.4.4 | ScalaraesLineDiagPsCCFLirl2 | read-only | current | Channel Characteristics Function H(f) per subcarrier. The value is the real part of a complex value in liner scale. The first two octets specify the li.rl valu… |
| 1.3.6.1.4.1.6321.1.2.3.1.97.4.5 | ScalaraesLineDiagPsCCFLiim1 | read-only | current | Channel Characteristics Function H(f) per subcarrier. The value is the image part of a complex value in liner scale. The first two octets specify the li.im val… |
| 1.3.6.1.4.1.6321.1.2.3.1.97.4.6 | ScalaraesLineDiagPsCCFLiim2 | read-only | current | Channel Characteristics Function H(f) per subcarrier. The value is the image part of a complex value in liner scale. The first two octets specify the li.im val… |
| 1.3.6.1.4.1.6321.1.2.3.1.97.4.7 | ScalaraesLineDiagPsCCFLog1 | read-only | current | Channel Characteristics Function H(f) per subcarrier. The value provides magnitude value in a logarithmic scale. The first two octets specify the log value for… |
| 1.3.6.1.4.1.6321.1.2.3.1.97.4.8 | ScalaraesLineDiagPsCCFLog2 | read-only | current | Channel Characteristics Function H(f) per subcarrier. The value provides magnitude value in a logarithmic scale. The first two octets specify the log value for… |
| 1.3.6.1.4.1.6321.1.2.3.1.97.4.9 | ScalaraesLineDiagPsQLN | read-only | current | Quiet Line Noise PSD QLN(f) per subcarrier. The first octet specify QLN for subcarrier 1, and the second octet specify QLN for subcarrier 2, and so on. The obj… |
| 1.3.6.1.4.1.6321.1.2.3.1.97.4.10 | ScalaraesLineDiagPsSNR | read-only | current | Signal-to-Noise Ratio SNR(f) per subcarrier. The first octet specify SNR for subcarrier 1, and the second octet specify SNR for subcarrier 2, and so on. The ob… |
| 1.3.6.1.4.1.6321.1.2.3.1.97.5 | ScalaraesMaxNumOfAlarmProfiles | read-only | current | The maximum number of ADSL alarm profiles which the system supports. |
| 1.3.6.1.4.1.6321.1.2.3.1.97.6 | TableaesBitLoadingTable | not-accessible | current | This table provides the number of bits per carrier for each ADSL port. |
| 1.3.6.1.4.1.6321.1.2.3.1.97.6.1 | RowaesBitLoadingEntry | not-accessible | current | An entry in aesBitLoadingTable. |
| 1.3.6.1.4.1.6321.1.2.3.1.97.6.1.1 | ColumnaesBitLoadingBits | read-only | current | This object provides the number of bits for all carriers in the port. The first octet specify the number of bits for carrier 1, and the second octet specify th… |
| 1.3.6.1.4.1.6321.1.2.3.1.97.6.1.2 | ColumnaesBitLoadingAtucNumOfCarriers | read-only | current | The number of carriers for ATU-C. |
| 1.3.6.1.4.1.6321.1.2.3.1.97.6.1.3 | ColumnaesBitLoadingAturNumOfCarriers | read-only | current | The number of carriers for ATU-R. |
| 1.3.6.1.4.1.6321.1.2.3.1.97.7 | TableaesLineStatusTable | not-accessible | current | This table includes the ADSL line status. |
| 1.3.6.1.4.1.6321.1.2.3.1.97.7.1 | RowaesLineStatusEntry | not-accessible | current | An entry in aesLineStatusTable. |
| 1.3.6.1.4.1.6321.1.2.3.1.97.7.1.1 | ColumnaesLineStatusAdslMode | read-only | current | The link up mode of the ADSL line. |
| 1.3.6.1.4.1.6321.1.2.3.1.97.8 | Nodeselt | |||
| 1.3.6.1.4.1.6321.1.2.3.1.97.8.1 | ScalarseltTarget | read-write | current | IfIndex of the port which would be performed single end loopback test. |
| 1.3.6.1.4.1.6321.1.2.3.1.97.8.2 | ScalarseltOps | read-write | current | The manager sets the object to 1 to start the selt and the agent clears the object to zero when selt is successfully completed. |
| 1.3.6.1.4.1.6321.1.2.3.1.97.8.3 | ScalarseltStatus | read-only | current | Status description of the selt result. |
| 1.3.6.1.4.1.6321.1.2.3.1.97.8.4 | ScalarseltCableType | read-only | current | The cable type that selt result indicates. |
| 1.3.6.1.4.1.6321.1.2.3.1.97.8.5 | ScalarseltLoopEstimateLengthFt | read-only | current | The estimated loop length that selt result indicates. |
| 1.3.6.1.4.1.6321.1.2.3.1.97.8.6 | ScalarseltLoopEstimateLengthMeter | read-only | current | The estimated loop length that selt result indicates. |