MIB Viewer

E5-110-IESCOMMON-MIB

239 objects
No module-level DESCRIPTION found.
Imported Objects
E5-110-MIBe5x110 iesSeriesCommon
Q-BRIDGE-MIBPortList
RFC-1212--
RFC-1215TRAP-TYPE
RFC1155-SMIenterprises IpAddress
RFC1213-MIBDisplayString ifIndex PhysAddress
SNMPv2-SMIOBJECT-TYPE
SNMPv2-TCRowStatus
OIDNameAccessStatusDescription
1.3.6.1.4.1.6321.1.2.3.1.1NoderebootSend a message to the manager that the system is going to reboot. The variable is the reason why the system reboots.
1.3.6.1.4.1.6321.1.2.3.1.2NodesystemShutdownSend a message to the manager that the system is going to shutdown. The variable is the reason that causes the system to shutdown.
1.3.6.1.4.1.6321.1.2.3.1.3NodeoverheatSend a message to the manager that the system is overheated. The variable in the binding list is the current temperature in Celsius of the system.
1.3.6.1.4.1.6321.1.2.3.1.4NodeoverheatOverSend a message to the manager that the overheated condition is over. The variable in the binding list is the current temperature in Celsius of the system.
1.3.6.1.4.1.6321.1.2.3.1.5NodeerrLogSend a message to the manager that an error log is created in system. The variable in the binding list is the content of the error log.
1.3.6.1.4.1.6321.1.2.3.1.6NodefanRpmLowSend a message to the manager that the rpm of the fan is too low. The variable in the binding list is the current rpm of the fan.
1.3.6.1.4.1.6321.1.2.3.1.7NodefanRpmNormalSend a message to the manager that the low-rpm condition of the fan is over. The variable in the binding list is the current rpm of the fan.
1.3.6.1.4.1.6321.1.2.3.1.8NodevoltageOutOfRangeSend a message to the manager that the voltage of the system is out of range. The variable in the binding list is the current voltage in volt of the system.
1.3.6.1.4.1.6321.1.2.3.1.9NodevoltageNormalSend a message to the manager that the low-voltage condition is over. The variable in the binding list is the current voltage in volt of the system.
1.3.6.1.4.1.6321.1.2.3.1.10NodesystemMaintenanceFailureSend a message to the manager that the system maintence operation fail. The variable in the variable binding indicates the problem.
1.3.6.1.4.1.6321.1.2.3.1.11NodeconfigChangeThis notification indicates that the configuration data of one module is changed.
1.3.6.1.4.1.6321.1.2.3.1.12NodemoduleUpA moduleUp trap signifies that the sending protocol entity recognizes that one of the modules represented in the agent's configuration has come up.
1.3.6.1.4.1.6321.1.2.3.1.13NodemoduleDownA moduleDown trap signifies that the sending protocol entity recognizes a failure in one of the modules represented in the agent's configuration.
1.3.6.1.4.1.6321.1.2.3.1.14NodemodulePlugInA modulePlugIn trap signifies that the sending protocol entity recognizes that one module is plugged into the device.
1.3.6.1.4.1.6321.1.2.3.1.15NodemodulePullOutA modulePullOut trap signifies that the sending protocol entity recognizes one module is pulled out from the device.
1.3.6.1.4.1.6321.1.2.3.1.16NodepowerDC48VAFailureThe trap signifies that the power supply of DC 48V at the right side of main Chassis (front view) failed.
1.3.6.1.4.1.6321.1.2.3.1.17NodepowerDC48VANormalThe trap signifies that the power supply of DC 48V at the right side of main Chassis (front view) is in normal state.
1.3.6.1.4.1.6321.1.2.3.1.18NodepowerDC48VBFailureThe trap signifies that the power supply of DC 48V at the left side of main Chassis (front view) failed.
1.3.6.1.4.1.6321.1.2.3.1.19NodepowerDC48VBNormalThe trap signifies that the power supply of DC 48V at the left side of main Chassis (front view) is in normal state.
1.3.6.1.4.1.6321.1.2.3.1.20NodeextAlarmInputTriggerThe trap signifies that the external alarm input of MSC card is triggered.
1.3.6.1.4.1.6321.1.2.3.1.21NodeextAlarmInputReleaseThe trap signifies that the external alarm input of MSC card is released.
1.3.6.1.4.1.6321.1.2.3.1.22NodethermalSensorFailureThe trap signifies that the thermal sensor failed.
1.3.6.1.4.1.6321.1.2.3.1.23NodemscSwitchOverOKThe trap signifies that MSC card is switched over successfully. The value of iesSlotId is the slot ID of the current working MSC.
1.3.6.1.4.1.6321.1.2.3.1.24NodenetworkTopologyChangeThe trap signifies the network topology is changed.
1.3.6.1.4.1.6321.1.2.3.1.25NodeadslAtucLofThe trap signifies ATU-C Loss of Framing.
1.3.6.1.4.1.6321.1.2.3.1.26NodeadslAturLofThe trap signifies ATU-R Loss of Framing.
1.3.6.1.4.1.6321.1.2.3.1.27NodeadslAtucLosThe trap signifies ATU-C Loss of Signal.
1.3.6.1.4.1.6321.1.2.3.1.28NodeadslAturLosThe trap signifies ATU-R Loss of Signal.
1.3.6.1.4.1.6321.1.2.3.1.29NodeadslAturLprThe trap signifies ATU-R Loss of Power.
1.3.6.1.4.1.6321.1.2.3.1.30NodeadslAtucLofClearThe trap signifies ATU-C Loss of Framing is cleared.
1.3.6.1.4.1.6321.1.2.3.1.31NodeadslAturLofClearThe trap signifies ATU-R Loss of Framing is cleared.
1.3.6.1.4.1.6321.1.2.3.1.32NodeadslAtucLosClearThe trap signifies ATU-C Loss of Signal is cleared.
1.3.6.1.4.1.6321.1.2.3.1.33NodeadslAturLosClearThe trap signifies ATU-R Loss of Signal is cleared.
1.3.6.1.4.1.6321.1.2.3.1.34NodeadslAturLprClearThe trap signifies ATU-R Loss of Power is cleared.
1.3.6.1.4.1.6321.1.2.3.1.98.1NodeiesChassis
1.3.6.1.4.1.6321.1.2.3.1.98.1.1ScalariesNumOfChassisread-onlycurrentThe number of chassis in the IES-2000/3000 system
1.3.6.1.4.1.6321.1.2.3.1.98.1.2TableiesChassisTablenot-accessiblecurrentThe table which contains the chassis information in IES-2000/3000 system
1.3.6.1.4.1.6321.1.2.3.1.98.1.2.1RowiesChassisEntrynot-accessiblecurrent
1.3.6.1.4.1.6321.1.2.3.1.98.1.2.1.1ColumniesChassisIdread-onlycurrentThe Chassis ID
1.3.6.1.4.1.6321.1.2.3.1.98.1.2.1.2ColumniesChassisFrameNumberread-writecurrentThe Frame ID
1.3.6.1.4.1.6321.1.2.3.1.98.1.2.1.3ColumniesChassisSerialNumberread-onlycurrentThe Chassis Serial Number
1.3.6.1.4.1.6321.1.2.3.1.98.1.2.1.4ColumniesChassisNumberread-writecurrentThe Chassis Number which is defined by the system administrator for management purpose
1.3.6.1.4.1.6321.1.2.3.1.98.1.2.1.5ColumniesChassisStatusread-onlycurrentThe current status of the chassis.
1.3.6.1.4.1.6321.1.2.3.1.98.1.2.1.6ColumniesChassisProductPartNumberread-onlycurrentProduct part number
1.3.6.1.4.1.6321.1.2.3.1.98.1.2.1.7ColumniesChassisHwRevisionNumberread-onlycurrentHardware revision Number
1.3.6.1.4.1.6321.1.2.3.1.98.1.2.1.8ColumniesChassisCleiCoderead-onlycurrentCLEI code
1.3.6.1.4.1.6321.1.2.3.1.98.1.2.1.9ColumniesChassisHwVersionread-onlycurrentHardware version
1.3.6.1.4.1.6321.1.2.3.1.98.1.2.1.10ColumniesChassisMacAddressread-onlycurrentMAC address
1.3.6.1.4.1.6321.1.2.3.1.98.1.3TableiesSlotTablenot-accessiblecurrentThe table which contains the slot information in a chassis of IES-2000/3000 system
1.3.6.1.4.1.6321.1.2.3.1.98.1.3.1RowiesSlotEntrynot-accessiblecurrent
1.3.6.1.4.1.6321.1.2.3.1.98.1.3.1.1ColumniesSlotIdread-onlycurrentIdentity of the slot
1.3.6.1.4.1.6321.1.2.3.1.98.1.3.1.2ColumniesSlotModuleTyperead-onlycurrentCard type of the plug-in card in IES-2000/3000.
1.3.6.1.4.1.6321.1.2.3.1.98.1.3.1.3ColumniesSlotModuleDescrread-onlycurrentThe descriptions of the plug-in card in IES-2000/3000.
1.3.6.1.4.1.6321.1.2.3.1.98.1.3.1.4ColumniesSlotModuleFWVersionread-onlycurrentThe firmware version of the plug-in card in IES-2000/3000.
1.3.6.1.4.1.6321.1.2.3.1.98.1.3.1.5ColumniesSlotModuleDriverVersionread-onlycurrentThe DSL driver of the plug-in card in IES-2000/3000.
1.3.6.1.4.1.6321.1.2.3.1.98.1.3.1.6ColumniesSlotModuleModemCodeVersionread-onlycurrentThe DSL modem code version of the plug-in card in IES-2000/3000
1.3.6.1.4.1.6321.1.2.3.1.98.1.3.1.7ColumniesSlotModuleStatusread-onlycurrentThe module state of the plug-in card in IES-2000/3000
1.3.6.1.4.1.6321.1.2.3.1.98.1.3.1.8ColumniesSlotModuleAlarmStatusread-onlycurrentThis variable indicates the alarm status of the module. It is a bit map represented as a sum, therefore, it can represent multiple defects simultaneously. The …
1.3.6.1.4.1.6321.1.2.3.1.98.1.4TableiesMscPortConfTablenot-accessiblecurrentThe table contains port configuration information in MSC1000.
1.3.6.1.4.1.6321.1.2.3.1.98.1.4.1RowiesMscPortConfEntrynot-accessiblecurrent
1.3.6.1.4.1.6321.1.2.3.1.98.1.4.1.1ColumniesMscPortIdread-onlycurrentIdentity of the extension slot in MSC1000.
1.3.6.1.4.1.6321.1.2.3.1.98.1.4.1.2ColumniesMscPortTyperead-onlycurrentPort type of the extension slot in MSC1000.
1.3.6.1.4.1.6321.1.2.3.1.98.1.4.1.3ColumniesMscPortIfIndexread-onlycurrent
1.3.6.1.4.1.6321.1.2.3.1.98.1.4.1.4ColumniesMscPortSpeedread-writecurrent
1.3.6.1.4.1.6321.1.2.3.1.98.1.4.1.5ColumniesMscPortDuplexread-writecurrent
1.3.6.1.4.1.6321.1.2.3.1.98.1.4.1.6ColumniesMscPortFlowControlread-writecurrent
1.3.6.1.4.1.6321.1.2.3.1.98.1.4.1.7ColumniesMscPortDefaultVLANTaggingread-writecurrent
1.3.6.1.4.1.6321.1.2.3.1.98.1.4.1.8ColumniesMscPortTrunkGroupIdread-onlycurrent
1.3.6.1.4.1.6321.1.2.3.1.98.1.4.1.9ColumniesMscPortModeread-writecurrentThe operational mode for uplink and subtending ports in MSC. Only the operational mode of subtending ports can be modified.
1.3.6.1.4.1.6321.1.2.3.1.98.1.4.1.10ColumniesMscPortVLANTrunkingread-writecurrentThe VLAN trunking setting for uplink and subtending ports in MSC.
1.3.6.1.4.1.6321.1.2.3.1.98.2NodeiesHWMonitor
1.3.6.1.4.1.6321.1.2.3.1.98.2.1TableiesFanRpmTablenot-accessiblecurrentA table that contains rpm information about the fans.
1.3.6.1.4.1.6321.1.2.3.1.98.2.1.1RowiesFanRpmEntrynot-accessiblecurrentA list of rpm information for each fan.
1.3.6.1.4.1.6321.1.2.3.1.98.2.1.1.1ColumniesFanRpmIndexread-onlycurrentThe identity of the fan.
1.3.6.1.4.1.6321.1.2.3.1.98.2.1.1.2ColumniesFanRpmCurValueread-onlycurrentThe current rpm of the fan.
1.3.6.1.4.1.6321.1.2.3.1.98.2.1.1.3ColumniesFanRpmMaxValueread-onlycurrentThe maximum rpm ever performed by the fan.
1.3.6.1.4.1.6321.1.2.3.1.98.2.1.1.4ColumniesFanRpmMinValueread-onlycurrentThe minimum rpm ever performed by the fan.
1.3.6.1.4.1.6321.1.2.3.1.98.2.1.1.5ColumniesFanRpmLowThreshread-onlycurrentThe low threshold of the rpm of the fan. If the current rpm is less than the threshold, the device will initiate the fanRpmLow trap.
1.3.6.1.4.1.6321.1.2.3.1.98.2.1.1.6ColumniesFanRpmDescrread-onlycurrentThe description of the fan (e.g. location, function, etc.).
1.3.6.1.4.1.6321.1.2.3.1.98.2.2TableiesVoltageTablenot-accessiblecurrentA table that contains voltage information about the system.
1.3.6.1.4.1.6321.1.2.3.1.98.2.2.1RowiesVoltageEntrynot-accessiblecurrentA list of voltage information for each sensor.
1.3.6.1.4.1.6321.1.2.3.1.98.2.2.1.1ColumniesVoltageIndexread-onlycurrentThe identity of the sensor.
1.3.6.1.4.1.6321.1.2.3.1.98.2.2.1.2ColumniesVoltageCurValueread-onlycurrentThe current voltage detected by the sensor (in milli-voltage).
1.3.6.1.4.1.6321.1.2.3.1.98.2.2.1.3ColumniesVoltageMaxValueread-onlycurrentThe maximum voltage ever detected by the sensor (in milli-voltage).
1.3.6.1.4.1.6321.1.2.3.1.98.2.2.1.4ColumniesVoltageMinValueread-onlycurrentThe minimum voltage ever detected by the sensor (in milli-voltage).
1.3.6.1.4.1.6321.1.2.3.1.98.2.2.1.5ColumniesVoltageNominalValueread-onlycurrentThe nominal voltage which the power should supply (in milli-voltage).
1.3.6.1.4.1.6321.1.2.3.1.98.2.2.1.6ColumniesVoltageLowThreshread-onlycurrentThe low threshold of the voltage (in milli-voltage). If the current voltage is less than the threshold, the device will initiate the voltageLow trap.
1.3.6.1.4.1.6321.1.2.3.1.98.2.2.1.7ColumniesVoltageDescrread-onlycurrentThe description of the voltage (e.g. location, nominal value, etc.).
1.3.6.1.4.1.6321.1.2.3.1.98.2.3TableiesSysTempTablenot-accessiblecurrentA table that contains temperature information about system.
1.3.6.1.4.1.6321.1.2.3.1.98.2.3.1RowiesSysTempEntrynot-accessiblecurrentA list of temperature information for each sensor.
1.3.6.1.4.1.6321.1.2.3.1.98.2.3.1.1ColumniesSysTempIndexread-onlycurrentThe identity of the sensor.
1.3.6.1.4.1.6321.1.2.3.1.98.2.3.1.2ColumniesSysTempCurValueread-onlycurrentThe current temperature detected in Celsius by the sensor.
1.3.6.1.4.1.6321.1.2.3.1.98.2.3.1.3ColumniesSysTempMaxValueread-onlycurrentThe maximum temperature ever detected in Celsius by the sensor.
1.3.6.1.4.1.6321.1.2.3.1.98.2.3.1.4ColumniesSysTempMinValueread-onlycurrentThe minimum temperature ever detected in Celsius by the sensor.
1.3.6.1.4.1.6321.1.2.3.1.98.2.3.1.5ColumniesSysTempHighThreshread-onlycurrentThe high threshold of the temperature in Celsius. If the current temperature is higher than the threshold, the device will initiate the overheat trap.
1.3.6.1.4.1.6321.1.2.3.1.98.2.3.1.6ColumniesSysTempDescrread-onlycurrentThe description of the temperature sensor (e.g. location, function, etc.).
1.3.6.1.4.1.6321.1.2.3.1.98.3NodeiesSysMgnt
1.3.6.1.4.1.6321.1.2.3.1.98.3.1NodeiesSysState
1.3.6.1.4.1.6321.1.2.3.1.98.3.1.1ScalariesSystemCurrentStatusread-onlycurrentThis variable indicates the status of the system. The sysCurrentStatus is a bit map represented as a sum, therefore, it can represent multiple defects simultan…
1.3.6.1.4.1.6321.1.2.3.1.98.3.1.2ScalariesProblemCauseread-onlycurrentIt describes the problem occurred in the system, e.g. maintenance operation failures, system reboot, error log, ...etc.
1.3.6.1.4.1.6321.1.2.3.1.98.3.2NodeiesSysMaintenance
1.3.6.1.4.1.6321.1.2.3.1.98.3.2.1ScalariesMaintenanceOpsread-writecurrentThe managed object is for system maintenance. When the EMS wants to trigger the system maitenance operation, the EMS shall send SNMP-SET message to set the cor…
1.3.6.1.4.1.6321.1.2.3.1.98.3.2.2ScalariesMaintenanceTargetread-writecurrentThe managed object is used for identify the target on which the maintenance operation should be performed.
1.3.6.1.4.1.6321.1.2.3.1.98.3.2.3ScalariesMaintenanceDSLConfOpsread-writecurrentThe managed object is for xDSL line configuration. When the EMS wants to issue the desired operation, the EMS shall send SNMP-SET message to set the correspond…
1.3.6.1.4.1.6321.1.2.3.1.98.3.2.4ScalariesMaintenanceDSLConfTargetread-writecurrentThe managed object is used for identify the target on which the line configuration should be performed. The target is encoded as: Byte 1: the octet specifies a…
1.3.6.1.4.1.6321.1.2.3.1.98.3.2.5ScalariesMaintenanceDSLConfProfileNameread-writecurrentThe DSL profile name
1.3.6.1.4.1.6321.1.2.3.1.98.3.2.6ScalariesMaintenanceDSLConfModeread-writecurrentThe DSL mode. The semantic for each bit is: Bit 1: ADSL, G.lite Bit 2: ADSL, G.dmt Bit 3: ADSL, T1.413 Bit 4: ADSL, Auto Bit 5: ADSL, ETSI Bit 6: ADSL2, Bit 7:…
1.3.6.1.4.1.6321.1.2.3.1.98.3.2.7ScalariesMaintenanceDSLConfPktFilterread-writecurrentThe packet filter. The semantic for each bit is: Bit 1: accept all Bit 2: accept PPPoE only Bit 3: reject ARP Bit 4: reject DHCP Bit 5: reject EAPOL Bit 6: rej…
1.3.6.1.4.1.6321.1.2.3.1.98.3.2.8ScalariesMaintenanceDSLConfDot1xControlread-writecurrentThe configuration defines the 802.1x control type.
1.3.6.1.4.1.6321.1.2.3.1.98.3.2.9ScalariesMaintenanceDSLConfDot1xReauthPeriodread-writecurrentThe configuration defines the 802.1x re-authentication period (seconds).
1.3.6.1.4.1.6321.1.2.3.1.98.3.2.10ScalariesMaintenanceDSLConfMacCountread-writecurrentThe configuration defines the number of mac addresses which can pass through the port.
1.3.6.1.4.1.6321.1.2.3.1.98.3.2.11ScalariesMaintenanceVpiread-writecurrentVPI of the channel
1.3.6.1.4.1.6321.1.2.3.1.98.3.2.12ScalariesMaintenanceVciread-writecurrentVCI of the channel
1.3.6.1.4.1.6321.1.2.3.1.98.3.2.13ScalariesMaintenanceDSLConfAlarmProfileNameread-writecurrentThe DSL alarm profile name
1.3.6.1.4.1.6321.1.2.3.1.98.3.2.14ScalariesMaintenanceDSLConfAnnexLread-writecurrentThe annex L setting of the ADSL line (Only in AnnexA).
1.3.6.1.4.1.6321.1.2.3.1.98.3.2.15ScalariesMaintenanceDSLConfPmModeread-writecurrentThe power management mode of the ADSL line.
1.3.6.1.4.1.6321.1.2.3.1.98.3.2.16ScalariesMaintenanceDSLConfRateModeread-writecurrentDefines what form of transmit rate adaptation is configured on this modem. See ADSL Forum TR-005 [3] for more information.
1.3.6.1.4.1.6321.1.2.3.1.98.3.2.17ScalariesMaintenanceDSLConfIgmpFilterread-writecurrentThe IGMP filter name.
1.3.6.1.4.1.6321.1.2.3.1.98.3.3NodeiesSysTimeSetup
1.3.6.1.4.1.6321.1.2.3.1.98.3.3.1ScalariesTimeServerModeread-writecurrentThe mechanism of Time Server when the system boots up.
1.3.6.1.4.1.6321.1.2.3.1.98.3.3.2ScalariesTimeServerIPread-writecurrentThe IP Address of Time Server
1.3.6.1.4.1.6321.1.2.3.1.98.3.3.3ScalariesSystemTimeread-writecurrentThe system time
1.3.6.1.4.1.6321.1.2.3.1.98.3.3.4ScalariesSystemDateread-writecurrentThe system date
1.3.6.1.4.1.6321.1.2.3.1.98.3.3.5ScalariesSystemTimeZoneread-writecurrentThe system time zone
1.3.6.1.4.1.6321.1.2.3.1.98.3.4NodeiesSysAccessControl
1.3.6.1.4.1.6321.1.2.3.1.98.3.4.1TableiesAccessCtrlTablenot-accessiblecurrentA table that contains information about service access control.
1.3.6.1.4.1.6321.1.2.3.1.98.3.4.1.1RowiesAccessCtrlEntrynot-accessiblecurrentA list of access control entry.
1.3.6.1.4.1.6321.1.2.3.1.98.3.4.1.1.1ColumniesAccessCtrlServiceread-onlycurrentThe service type of the access control entry.
1.3.6.1.4.1.6321.1.2.3.1.98.3.4.1.1.2ColumniesAccessCtrlEnableread-writecurrentEnable or disable the service.
1.3.6.1.4.1.6321.1.2.3.1.98.3.4.1.1.3ColumniesAccessCtrlPortread-writecurrentThe port number which the service uses.
1.3.6.1.4.1.6321.1.2.3.1.98.3.4.2ScalariesMaxNumOfSecuredClientsread-onlycurrentThe maximum number of sets of secured clients.
1.3.6.1.4.1.6321.1.2.3.1.98.3.4.3TableiesSecuredClientTablenot-accessiblecurrentA table that contains information about secured clients.
1.3.6.1.4.1.6321.1.2.3.1.98.3.4.3.1RowiesSecuredClientEntrynot-accessiblecurrentA list of secured client entry.
1.3.6.1.4.1.6321.1.2.3.1.98.3.4.3.1.1ColumniesSecuredClientStartIpread-onlycurrentThe starting IP address of a set of secured clients.
1.3.6.1.4.1.6321.1.2.3.1.98.3.4.3.1.2ColumniesSecuredClientEndIpread-onlycurrentThe ending IP address of a set of secured clients.
1.3.6.1.4.1.6321.1.2.3.1.98.3.4.3.1.3ColumniesSecuredClientServiceread-createcurrentEach bit corresponds to a service. The bit is set to 1 if the service is enabled, and set to 0 if the service is disabled. The various bit positions are: BIT 1…
1.3.6.1.4.1.6321.1.2.3.1.98.3.4.3.1.4ColumniesSecuredClientRowStatusread-createcurrentThis object is used to create a new row or modify or delete an existing row in this table. A row is activated by setting this object to `active', and is deacti…
1.3.6.1.4.1.6321.1.2.3.1.98.3.5NodeiesSysStaticRoute
1.3.6.1.4.1.6321.1.2.3.1.98.3.5.1ScalariesMaxNumOfStaticRoutesread-onlycurrentThe maximum number of static routes.
1.3.6.1.4.1.6321.1.2.3.1.98.3.5.2TableiesStaticRouteTablenot-accessiblecurrentA table that contains information about static routes.
1.3.6.1.4.1.6321.1.2.3.1.98.3.5.2.1RowiesStaticRouteEntrynot-accessiblecurrentA list of static route entry.
1.3.6.1.4.1.6321.1.2.3.1.98.3.5.2.1.1ColumniesStaticRouteNameread-onlycurrentThe name of the static route.
1.3.6.1.4.1.6321.1.2.3.1.98.3.5.2.1.2ColumniesStaticRouteDestread-createcurrentThe destination IP address of the static route.
1.3.6.1.4.1.6321.1.2.3.1.98.3.5.2.1.3ColumniesStaticRouteMaskread-createcurrentThe subnet mask of the static route.
1.3.6.1.4.1.6321.1.2.3.1.98.3.5.2.1.4ColumniesStaticRouteGatewayread-createcurrentThe gateway IP address of the static route.
1.3.6.1.4.1.6321.1.2.3.1.98.3.5.2.1.5ColumniesStaticRouteMetricread-createcurrentThe routing metric of the static route.
1.3.6.1.4.1.6321.1.2.3.1.98.3.5.2.1.6ColumniesStaticRouteRowStatusread-createcurrentThis object is used to create a new row or modify or delete an existing row in this table. A row is activated by setting this object to `active', and is deacti…
1.3.6.1.4.1.6321.1.2.3.1.98.3.6NodeiesSyslogSetup
1.3.6.1.4.1.6321.1.2.3.1.98.3.6.1ScalariesSysLogEnableread-writecurrentEnable/disable syslog function.
1.3.6.1.4.1.6321.1.2.3.1.98.3.6.2ScalariesSysLogServerread-writecurrentIP address of the syslog server.
1.3.6.1.4.1.6321.1.2.3.1.98.3.6.3ScalariesSysLogFacilityread-writecurrentLog facility used by the syslog function.
1.3.6.1.4.1.6321.1.2.3.1.98.3.7NodeiesSysDhcpSetup
1.3.6.1.4.1.6321.1.2.3.1.98.3.7.1ScalariesDhcpRelayEnableread-writecurrentEnable/disable DHCP relay function.
1.3.6.1.4.1.6321.1.2.3.1.98.3.7.2ScalariesDhcpRelayOption82Enableread-writecurrentEnable/disable DHCP relay Option82 function.
1.3.6.1.4.1.6321.1.2.3.1.98.3.7.3ScalariesDhcpRelayOption82Inforead-writecurrentUser specific Option82 information.
1.3.6.1.4.1.6321.1.2.3.1.98.3.7.4ScalariesMaxNumOfDhcpServersread-onlycurrentThe maximum number of DHCP servers.
1.3.6.1.4.1.6321.1.2.3.1.98.3.7.5TableiesDhcpServerTablenot-accessiblecurrentA table that contains DHCP server information.
1.3.6.1.4.1.6321.1.2.3.1.98.3.7.5.1RowiesDhcpServerEntrynot-accessiblecurrentThe entry of DHCP server table.
1.3.6.1.4.1.6321.1.2.3.1.98.3.7.5.1.1ColumniesDhcpServerIpread-onlycurrentThe IP address of the DHCP server.
1.3.6.1.4.1.6321.1.2.3.1.98.3.7.5.1.2ColumniesDhcpServerRowStatusread-createcurrentThe row status of the DHCP server entry.
1.3.6.1.4.1.6321.1.2.3.1.98.3.8NodeiesSysSNMPSetup
1.3.6.1.4.1.6321.1.2.3.1.98.3.8.1ScalariesMaxNumberOfTrapDestinationsread-onlycurrentThe max number of the trap destinations.
1.3.6.1.4.1.6321.1.2.3.1.98.3.8.2TableiesSNMPTrapDestTablenot-accessiblecurrentA table that contains SNMP trap destination information.
1.3.6.1.4.1.6321.1.2.3.1.98.3.8.2.1RowiesSNMPTrapDestEntrynot-accessiblecurrentThe entry of SNMP trap destination table.
1.3.6.1.4.1.6321.1.2.3.1.98.3.8.2.1.1ColumniesTrapDestIpread-onlycurrentThe IP address of the trap destination.
1.3.6.1.4.1.6321.1.2.3.1.98.3.8.2.1.2ColumniesTrapDestPortread-onlycurrentThe UDP port of the trap destination.
1.3.6.1.4.1.6321.1.2.3.1.98.3.8.2.1.3ColumniesTrapDestRowStatusread-createcurrentThe row status of the trap destination entry.
1.3.6.1.4.1.6321.1.2.3.1.98.3.8.3ScalariesSnmpGetCommunityread-writecurrentThe SNMP get community.
1.3.6.1.4.1.6321.1.2.3.1.98.3.8.4ScalariesSnmpSetCommunityread-writecurrentThe SNMP set community.
1.3.6.1.4.1.6321.1.2.3.1.98.3.8.5ScalariesSnmpTrapCommunityread-writecurrentThe SNMP trap community.
1.3.6.1.4.1.6321.1.2.3.1.98.3.9NodeiesSysDot1xSetup
1.3.6.1.4.1.6321.1.2.3.1.98.3.9.1ScalariesMaxNumberOfRadiusServersread-onlycurrentThe max number of the RADIUS Servers.
1.3.6.1.4.1.6321.1.2.3.1.98.3.9.2TableiesRadiusServerTablenot-accessiblecurrentA table that contains Radius Server information.
1.3.6.1.4.1.6321.1.2.3.1.98.3.9.2.1RowiesRadiusServerEntrynot-accessiblecurrentThe entry of Radius Server table.
1.3.6.1.4.1.6321.1.2.3.1.98.3.9.2.1.1ColumniesRadiusServerIndexread-onlycurrentThe identity of the RADIUS server.
1.3.6.1.4.1.6321.1.2.3.1.98.3.9.2.1.2ColumniesRadiusServerIpread-createcurrentThe IP address of the Radius Server.
1.3.6.1.4.1.6321.1.2.3.1.98.3.9.2.1.3ColumniesRadiusServerPortread-createcurrentThe UDP port of the Radius Server.
1.3.6.1.4.1.6321.1.2.3.1.98.3.9.2.1.4ColumniesRadiusSharedSecretread-createcurrentThe shared secret of the Radius Server.
1.3.6.1.4.1.6321.1.2.3.1.98.3.9.2.1.5ColumniesRadiusServerRowStatusread-createcurrentThe row status of the Radius Server entry.
1.3.6.1.4.1.6321.1.2.3.1.98.3.9.3ScalariesDot1xEnableread-writecurrentEnable/disable the 802.1x function.
1.3.6.1.4.1.6321.1.2.3.1.98.3.9.4TableiesDot1xPortTablenot-accessiblecurrentThis table includes the configuration of 802.1x.
1.3.6.1.4.1.6321.1.2.3.1.98.3.9.4.1RowiesDot1xPortEntrynot-accessiblecurrentAn entry in iesDot1xPortTable.
1.3.6.1.4.1.6321.1.2.3.1.98.3.9.4.1.1ColumniesDot1xPortEnableread-writecurrentThe option defines if the port enables 802.1x settings.
1.3.6.1.4.1.6321.1.2.3.1.98.3.9.4.1.2ColumniesDot1xPortControlread-writecurrentThe configuration defines the 802.1x port control type.
1.3.6.1.4.1.6321.1.2.3.1.98.3.9.4.1.3ColumniesDot1xPortReAuthEnableread-writecurrentThe option defines if the port enables 802.1x re-authentication.
1.3.6.1.4.1.6321.1.2.3.1.98.3.9.4.1.4ColumniesDot1xPortReAuthPeriodread-writecurrentThe configuration defines the 802.1x re-authentication period (seconds) for each port.
1.3.6.1.4.1.6321.1.2.3.1.98.3.10NodeiesSysMacFilter
1.3.6.1.4.1.6321.1.2.3.1.98.3.10.1TableiesMacFilterStatusTablenot-accessiblecurrentThis table includes the status of mac filtering for each port.
1.3.6.1.4.1.6321.1.2.3.1.98.3.10.1.1RowiesMacFilterStatusEntrynot-accessiblecurrentAn entry in iesMacFilterStatusTable.
1.3.6.1.4.1.6321.1.2.3.1.98.3.10.1.1.1ColumniesMacFilterStatusEnableread-writecurrentThe option defines if the port enables mac filtering.
1.3.6.1.4.1.6321.1.2.3.1.98.3.10.2ScalariesMaxNumberOfMacFiltersread-onlycurrentThe max number of the mac filters in the system.
1.3.6.1.4.1.6321.1.2.3.1.98.3.10.3ScalariesMaxNumberOfMacFiltersPerPortread-onlycurrentThe max number of the mac filters for each port.
1.3.6.1.4.1.6321.1.2.3.1.98.3.10.4ScalariesCurrNumberOfMacFiltersread-onlycurrentThe current number of the mac filters in the system.
1.3.6.1.4.1.6321.1.2.3.1.98.3.10.5TableiesMacFilterTablenot-accessiblecurrentA table that contains the mac filtering information.
1.3.6.1.4.1.6321.1.2.3.1.98.3.10.5.1RowiesMacFilterEntrynot-accessiblecurrentThe entry of iesMacFilterTable.
1.3.6.1.4.1.6321.1.2.3.1.98.3.10.5.1.1ColumniesMacFilterMacAddrread-onlycurrentThe mac address which can pass through the port.
1.3.6.1.4.1.6321.1.2.3.1.98.3.10.5.1.2ColumniesMacFilterRowStatusread-createcurrentThe row status of the entry.
1.3.6.1.4.1.6321.1.2.3.1.98.3.11NodeiesSysPacketFilter
1.3.6.1.4.1.6321.1.2.3.1.98.3.11.1TableiesPacketFilterTablenot-accessiblecurrentThis table includes packet filtering for each port.
1.3.6.1.4.1.6321.1.2.3.1.98.3.11.1.1RowiesPacketFilterEntrynot-accessiblecurrentAn entry in iesPacketFilterTable.
1.3.6.1.4.1.6321.1.2.3.1.98.3.11.1.1.1ColumniesPacketFilterread-writecurrentThe packet filter. The semantic for each bit is: Bit 1: accept all Bit 2: accept PPPoE only Bit 3: reject ARP Bit 4: reject DHCP Bit 5: reject EAPOL Bit 6: rej…
1.3.6.1.4.1.6321.1.2.3.1.98.3.12NodeiesSysMacCountFilter
1.3.6.1.4.1.6321.1.2.3.1.98.3.12.1TableiesMacCountFilterTablenot-accessiblecurrentThis table includes mac count filtering for each port.
1.3.6.1.4.1.6321.1.2.3.1.98.3.12.1.1RowiesMacCountFilterEntrynot-accessiblecurrentAn entry in iesMacCountFilterTable.
1.3.6.1.4.1.6321.1.2.3.1.98.3.12.1.1.1ColumniesMacCountFilterStatusread-writecurrentThe option defines if the port enables mac count filtering.
1.3.6.1.4.1.6321.1.2.3.1.98.3.12.1.1.2ColumniesMacCountFilterCountread-writecurrentThe number of mac addresses which can pass through the port.
1.3.6.1.4.1.6321.1.2.3.1.98.3.13NodeiesSysMulticastGroup
1.3.6.1.4.1.6321.1.2.3.1.98.3.13.1ScalariesMaxNumberOfMulticastGroupsread-onlycurrentThe max number of static multicast groups in the system.
1.3.6.1.4.1.6321.1.2.3.1.98.3.13.2TableiesMulticastGroupTablenot-accessiblecurrentA table that contains static multicast group information.
1.3.6.1.4.1.6321.1.2.3.1.98.3.13.2.1RowiesMulticastGroupEntrynot-accessiblecurrentThe entry of multicast group table.
1.3.6.1.4.1.6321.1.2.3.1.98.3.13.2.1.1ColumniesMulticastGroupMacAddrread-onlycurrentThe multicast MAC address of the group.
1.3.6.1.4.1.6321.1.2.3.1.98.3.13.2.1.2ColumniesMulticastGroupPortsread-createcurrentThe port list which specifies the ports joining the multicast group.
1.3.6.1.4.1.6321.1.2.3.1.98.3.13.2.1.3ColumniesMulticastGroupRowStatusread-createcurrentThe row status of the multicast group entry.
1.3.6.1.4.1.6321.1.2.3.1.98.3.14NodeiesSysIgmpFilter
1.3.6.1.4.1.6321.1.2.3.1.98.3.14.1ScalariesMaxNumberOfIgmpFiltersread-onlycurrentThe max number of IGMP filters in the system.
1.3.6.1.4.1.6321.1.2.3.1.98.3.14.2TableiesIgmpFilterTablenot-accessiblecurrentA table that contains IGMP filters.
1.3.6.1.4.1.6321.1.2.3.1.98.3.14.2.1RowiesIgmpFilterEntrynot-accessiblecurrentThe entry of IGMP filter table.
1.3.6.1.4.1.6321.1.2.3.1.98.3.14.2.1.1ColumniesIgmpFilterNameread-onlycurrentThe IGMP filter name.
1.3.6.1.4.1.6321.1.2.3.1.98.3.14.2.1.2ColumniesIgmpFilterIndexread-onlycurrentThe index which specifies the filter rule.
1.3.6.1.4.1.6321.1.2.3.1.98.3.14.2.1.3ColumniesIgmpFilterStartIpread-createcurrentThe start IP of the filter rule.
1.3.6.1.4.1.6321.1.2.3.1.98.3.14.2.1.4ColumniesIgmpFilterEndIpread-createcurrentThe end IP of the filter rule.
1.3.6.1.4.1.6321.1.2.3.1.98.3.14.2.1.5ColumniesIgmpFilterRowStatusread-createcurrentThe row status of the IGMP filter entry.
1.3.6.1.4.1.6321.1.2.3.1.98.3.14.3TableiesIgmpFilterPortTablenot-accessiblecurrentThis table specifies the IGMP filter of the port.
1.3.6.1.4.1.6321.1.2.3.1.98.3.14.3.1RowiesIgmpFilterPortEntrynot-accessiblecurrentAn entry in iesIgmpFilterPortTable.
1.3.6.1.4.1.6321.1.2.3.1.98.3.14.3.1.1ColumniesIgmpFilterPortFilterread-writecurrentThe IGMP filter of the port.
1.3.6.1.4.1.6321.1.2.3.1.98.4NodeiesL2SW
1.3.6.1.4.1.6321.1.2.3.1.98.4.1ScalariesIGMPSnoopingEnabledread-writecurrentA flag indicating whether IGMP snooping function is enabled or not.
1.3.6.1.4.1.6321.1.2.3.1.98.4.2ScalariesManagementVLANIdread-writecurrentThe VLAN ID for management.
1.3.6.1.4.1.6321.1.2.3.1.98.4.3ScalariesMaxNumOfStaticVlansread-onlycurrentThe maximum number of static VLANs supported by the system.
1.3.6.1.4.1.6321.1.2.3.1.98.4.4ScalariesMaxNumOfTrunkGroupsread-onlycurrentThe maximum number of trunk groups.
1.3.6.1.4.1.6321.1.2.3.1.98.4.5TableiesTrunkGroupTablenot-accessiblecurrentA table that contains trunk group configuration.
1.3.6.1.4.1.6321.1.2.3.1.98.4.5.1RowiesTrunkGroupEntrynot-accessiblecurrentThe entry of trunk group table
1.3.6.1.4.1.6321.1.2.3.1.98.4.5.1.1ColumniesTrunkGroupIdread-onlycurrentThe ID of the trunk group
1.3.6.1.4.1.6321.1.2.3.1.98.4.5.1.2ColumniesTrunkGroupNameread-createcurrentThe name of the trunk group
1.3.6.1.4.1.6321.1.2.3.1.98.4.5.1.3ColumniesTrunkGroupPortsread-createcurrentThe port list of the trunk group
1.3.6.1.4.1.6321.1.2.3.1.98.4.5.1.4ColumniesTrunkGroupRowStatusread-createcurrentThe row status of the trunk group entry
1.3.6.1.4.1.6321.1.2.3.1.98.4.6ScalariesPortIsolationEnableread-writecurrentA flag indicating whether VLAN port isolation function is enabled or not.
1.3.6.1.4.1.6321.1.2.3.1.98.4.7ScalariesRSTPEnableread-writecurrentEnable/Disable RSTP.
1.3.6.1.4.1.6321.1.2.3.1.98.4.8ScalariesSwitchModeread-writecurrentSwitch DSLAM's operatrion Mode.
MIB Viewer