MIB Viewer

E5-121-MIB

1063 objects
No module-level DESCRIPTION found.
Imported Objects
BRIDGE-MIBBridgeId dot1dBasePort MacAddress Timeout
IEEE8021-CFMD8-MIB MISSINGdot1agCfmMaIndex dot1agCfmMdIndex dot1agCfmMepIdentifier
P-BRIDGE-MIBdot1dTrafficClass
Q-BRIDGE-MIBdot1qVlanIndex PortList VlanIndex
RFC1155-SMIenterprises
RFC1213-MIBDisplayString ifIndex PhysAddress
SNMPv2-SMICounter32 Counter64 Gauge32 IpAddress NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32
SNMPv2-TCRowStatus TEXTUAL-CONVENTION
OIDNameAccessStatusDescription
1.3.6.1.4.1.6321NodecalixNetworks
1.3.6.1.4.1.6321.1NodecalixRegistrations
1.3.6.1.4.1.6321.1.2NodecalixProducts
1.3.6.1.4.1.6321.1.2.3Nodee5x100
1.3.6.1.4.1.6321.1.2.3.4Nodee5x121
1.3.6.1.4.1.6321.1.2.3.4.2Nodealarmconf
1.3.6.1.4.1.6321.1.2.3.4.2.1ScalaralarmOpsread-writecurrentThe manager sets the corresponding bit value to 1 to start the operation and the agent clears the object to zero when the operation is successfully completed. …
1.3.6.1.4.1.6321.1.2.3.4.2.2TablealarmConfTablenot-accessiblecurrentThis table includes alarm configuration.
1.3.6.1.4.1.6321.1.2.3.4.2.2.1RowalarmConfEntrynot-accessiblecurrentAn entry in alarmConfTable.
1.3.6.1.4.1.6321.1.2.3.4.2.2.1.1ColumnalarmConfIdread-onlycurrent5000:vdslLine_up 5001:vdslLine_down 5002:vdsl_tca_lol 5003:vdsl_tca_lof 5004:vdsl_tca_los 5005:vdsl_tca_lop 5006:vdsl_tca_es 5007:vdsl_tca_ses 5008:vdsl_tca_ua…
1.3.6.1.4.1.6321.1.2.3.4.2.2.1.2ColumnalarmConfFacilityread-writecurrentAlarm facility.
1.3.6.1.4.1.6321.1.2.3.4.2.2.1.3ColumnalarmConfTargetread-writecurrentThe destination which alarms are reported to. Set the bit to 1 to enable the target. BIT 1: snmp trap BIT 2: syslog
1.3.6.1.4.1.6321.1.2.3.4.2.2.1.4ColumnalarmConfSeverityread-writecurrentAlarm severity
1.3.6.1.4.1.6321.1.2.3.4.2.2.1.5ColumnalarmConfClearableread-writecurrentSetting the object to one indicates that the alarm is to be cleared when user submits alarm clear.
1.3.6.1.4.1.6321.1.2.3.4.2.3TablealarmCurrTablenot-accessiblecurrentThis table includes current alarm information.
1.3.6.1.4.1.6321.1.2.3.4.2.3.1RowalarmCurrEntrynot-accessiblecurrentAn entry in alarmCurrTable.
1.3.6.1.4.1.6321.1.2.3.4.2.3.1.1ColumnalarmCurrIndexread-onlycurrentIndex of the alarm.
1.3.6.1.4.1.6321.1.2.3.4.2.3.1.2ColumnalarmCurrOccurTimeread-onlycurrentAlarm occurence time (in hundredths of a second) since the system was last re-initialized.
1.3.6.1.4.1.6321.1.2.3.4.2.3.1.3ColumnalarmCurrTrapOidread-onlycurrentTrap OID of the alarm.
1.3.6.1.4.1.6321.1.2.3.4.2.3.1.4ColumnalarmCurrParam1read-onlycurrentThe 1st parameter of the alarm.
1.3.6.1.4.1.6321.1.2.3.4.2.3.1.5ColumnalarmCurrParam2read-onlycurrentThe 2nd parameter of the alarm.
1.3.6.1.4.1.6321.1.2.3.4.2.3.1.6ColumnalarmCurrParam3read-onlycurrentThe 3rd parameter of the alarm.
1.3.6.1.4.1.6321.1.2.3.4.2.3.1.7ColumnalarmCurrParam4read-onlycurrentThe 4th parameter of the alarm.
1.3.6.1.4.1.6321.1.2.3.4.2.3.1.8ColumnalarmCurrParam5read-onlycurrentThe 5th parameter of the alarm.
1.3.6.1.4.1.6321.1.2.3.4.2.3.1.9ColumnalarmCurrParam6read-onlycurrentThe 6th parameter of the alarm.
1.3.6.1.4.1.6321.1.2.3.4.2.3.1.10ColumnalarmCurrParam7read-onlycurrentThe 7th parameter of the alarm.
1.3.6.1.4.1.6321.1.2.3.4.2.3.1.11ColumnalarmCurrParam8read-onlycurrentThe 8th parameter of the alarm.
1.3.6.1.4.1.6321.1.2.3.4.2.3.1.12ColumnalarmCurrTimeDescrread-onlycurrentThe string representation of occurence time (YYYY/MM/DD HH:MM:SS).
1.3.6.1.4.1.6321.1.2.3.4.2.3.1.13ColumnalarmCurrSeverityread-onlycurrentThe severity of the alarm.
1.3.6.1.4.1.6321.1.2.3.4.2.3.1.14ColumnalarmCurrDescrread-onlycurrentThe description of the alarm.
1.3.6.1.4.1.6321.1.2.3.4.2.4TablealarmSeverityPortTablenot-accessiblecurrentThis table includes the configuration of alarm reporting severity threshold for each port.
1.3.6.1.4.1.6321.1.2.3.4.2.4.1RowalarmSeverityPortEntrynot-accessiblecurrentAn entry in alarmSeverityPortTable.
1.3.6.1.4.1.6321.1.2.3.4.2.4.1.1ColumnseverityThreshread-writecurrentThe minimum alarm severity that is reported.
1.3.6.1.4.1.6321.1.2.3.4.4Nodediagnostic
1.3.6.1.4.1.6321.1.2.3.4.4.3Nodeselt
1.3.6.1.4.1.6321.1.2.3.4.4.3.1ScalarseltTargetread-writecurrentIfIndex of the port which would be performed single end loopback test.
1.3.6.1.4.1.6321.1.2.3.4.4.3.2ScalarseltOpsread-writecurrentThe manager sets the object to 1 to start the selt and the agent clears the object to zero when selt is successfully completed.
1.3.6.1.4.1.6321.1.2.3.4.4.3.3ScalarseltStatusread-onlycurrentStatus description of the selt result.
1.3.6.1.4.1.6321.1.2.3.4.4.3.4ScalarseltCableTyperead-onlycurrentThe cable type that selt result indicates.
1.3.6.1.4.1.6321.1.2.3.4.4.3.5ScalarseltLoopEstimateLengthFtread-onlycurrentThe estimated loop length that selt result indicates.
1.3.6.1.4.1.6321.1.2.3.4.4.3.6ScalarseltLoopEstimateLengthMeterread-onlycurrentThe estimated loop length that selt result indicates.
1.3.6.1.4.1.6321.1.2.3.4.4.4Nodeldm
1.3.6.1.4.1.6321.1.2.3.4.4.4.1ScalarldmTargetread-writecurrentIfIndex of the port which would be performed ldm test.
1.3.6.1.4.1.6321.1.2.3.4.4.4.2ScalarldmOpsread-writecurrentThe manager sets the object to 1 to start the ldm test and the agent clears the object to zero when ldm test is successfully completed.
1.3.6.1.4.1.6321.1.2.3.4.4.4.3ScalarldmStatusread-onlycurrentStatus description of ldm test result.
1.3.6.1.4.1.6321.1.2.3.4.4.4.4ScalarldmXtucLoopAttenuationread-onlycurrentLoop Attenuation.
1.3.6.1.4.1.6321.1.2.3.4.4.4.5ScalarldmXtucSignalAttenuationread-onlycurrentSignal Attenuation.
1.3.6.1.4.1.6321.1.2.3.4.4.4.6ScalarldmXtucSignalMarginread-onlycurrentSignal Margin.
1.3.6.1.4.1.6321.1.2.3.4.4.4.7ScalarldmXtucAggregateTxPowerread-onlycurrentActual Aggregate Transmit Power.
1.3.6.1.4.1.6321.1.2.3.4.4.4.8ScalarldmXtucAttainableBitRateread-onlycurrentAttainable Bit Rate.
1.3.6.1.4.1.6321.1.2.3.4.4.4.9ScalarldmXturLoopAttenuationread-onlycurrentLoop Attenuation.
1.3.6.1.4.1.6321.1.2.3.4.4.4.10ScalarldmXturSignalAttenuationread-onlycurrentSignal Attenuation.
1.3.6.1.4.1.6321.1.2.3.4.4.4.11ScalarldmXturSignalMarginread-onlycurrentSignal Margin.
1.3.6.1.4.1.6321.1.2.3.4.4.4.12ScalarldmXturAggregateTxPowerread-onlycurrentActual Aggregate Transmit Power.
1.3.6.1.4.1.6321.1.2.3.4.4.4.13ScalarldmXturAttainableBitRateread-onlycurrentAttainable Bit Rate.
1.3.6.1.4.1.6321.1.2.3.4.4.4.14ScalarldmXtucNumOfSubcarriersPerPortread-onlycurrentThe number of subcarriers per port for ATU-C.
1.3.6.1.4.1.6321.1.2.3.4.4.4.15ScalarldmXturNumOfSubcarriersPerPortread-onlycurrentThe number of subcarriers per port for ATU-R.
1.3.6.1.4.1.6321.1.2.3.4.4.4.16ScalarldmXtucHlinScaleread-onlycurrentScale of Hlin.
1.3.6.1.4.1.6321.1.2.3.4.4.4.17ScalarldmXtucHlinReal1read-onlycurrentThe object provides real part of Hlin for the first 256 subcarriers. Each subcarrier takes two octets to store the value.
1.3.6.1.4.1.6321.1.2.3.4.4.4.18ScalarldmXtucHlinReal2read-onlycurrentThe object provides real part of Hlin for the last 256 subcarriers. Each subcarrier takes two octets to store the value.
1.3.6.1.4.1.6321.1.2.3.4.4.4.19ScalarldmXtucHlinImage1read-onlycurrentThe object provides image part of Hlin for the first 256 subcarriers. Each subcarrier takes two octets to store the value.
1.3.6.1.4.1.6321.1.2.3.4.4.4.20ScalarldmXtucHlinImage2read-onlycurrentThe object provides image part of Hlin for the last 256 subcarriers. Each subcarrier takes two octets to store the value.
1.3.6.1.4.1.6321.1.2.3.4.4.4.21ScalarldmXtucHlog1read-onlycurrentThe object provides Hlog for the first 256 subcarriers. Each subcarrier takes two octets to store the value.
1.3.6.1.4.1.6321.1.2.3.4.4.4.22ScalarldmXtucHlog2read-onlycurrentThe object provides Hlog for the last 256 subcarriers. Each subcarrier takes two octets to store the value.
1.3.6.1.4.1.6321.1.2.3.4.4.4.23ScalarldmXtucQln1read-onlycurrentThe object provides QLN for the first 256 subcarriers. Each subcarrier takes two octets to store the value.
1.3.6.1.4.1.6321.1.2.3.4.4.4.24ScalarldmXtucQln2read-onlycurrentThe object provides QLN for the last 256 subcarriers. Each subcarrier takes two octets to store the value.
1.3.6.1.4.1.6321.1.2.3.4.4.4.25ScalarldmXtucSnr1read-onlycurrentThe object provides SNR for the first 256 subcarriers. Each subcarrier takes two octets to store the value.
1.3.6.1.4.1.6321.1.2.3.4.4.4.26ScalarldmXtucSnr2read-onlycurrentThe object provides SNR for the last 256 subcarriers. Each subcarrier takes two octets to store the value.
1.3.6.1.4.1.6321.1.2.3.4.4.4.27ScalarldmXturHlinScaleread-onlycurrentScale of Hlin.
1.3.6.1.4.1.6321.1.2.3.4.4.4.28ScalarldmXturHlinRealread-onlycurrentReal part of Hlin. Each subcarrier takes two octets to store the value.
1.3.6.1.4.1.6321.1.2.3.4.4.4.29ScalarldmXturHlinImageread-onlycurrentImage part of Hlin. Each subcarrier takes two octets to store the value.
1.3.6.1.4.1.6321.1.2.3.4.4.4.30ScalarldmXturHlogread-onlycurrentHlog of subcarrier. Each subcarrier takes two octets to store the value.
1.3.6.1.4.1.6321.1.2.3.4.4.4.31ScalarldmXturQlnread-onlycurrentQLN of subcarrier. Each subcarrier takes two octets to store the value.
1.3.6.1.4.1.6321.1.2.3.4.4.4.32ScalarldmXturSnrread-onlycurrentSNR of subcarrier. Each subcarrier takes two octets to store the value.
1.3.6.1.4.1.6321.1.2.3.4.4.4.33ScalarldmXtucHlogGroupFactorread-onlycurrentThe Hlog group factor of ATU-C.
1.3.6.1.4.1.6321.1.2.3.4.4.4.34ScalarldmXtucQlnGroupFactorread-onlycurrentThe Qln group factor of ATU-C.
1.3.6.1.4.1.6321.1.2.3.4.4.4.35ScalarldmXtucSnrGroupFactorread-onlycurrentThe Snr group factor of ATU-C.
1.3.6.1.4.1.6321.1.2.3.4.4.4.36ScalarldmXturHlogGroupFactorread-onlycurrentThe Hlog group factor of ATU-R.
1.3.6.1.4.1.6321.1.2.3.4.4.4.37ScalarldmXturQlnGroupFactorread-onlycurrentThe Qln group factor of ATU-R.
1.3.6.1.4.1.6321.1.2.3.4.4.4.38ScalarldmXturSnrGroupFactorread-onlycurrentThe Snr group factor of ATU-R.
1.3.6.1.4.1.6321.1.2.3.4.4.5Nodemlt
1.3.6.1.4.1.6321.1.2.3.4.4.5.1ScalarmltTargetread-writecurrentIfIndex of the port which would be performed Metallic Link Test.
1.3.6.1.4.1.6321.1.2.3.4.4.5.2ScalarmltOpsread-writecurrentThe manager sets the object to 1 to start the mlt and the agent clears the object to zero when mlt is successfully completed.
1.3.6.1.4.1.6321.1.2.3.4.4.5.3ScalarmltOptionread-writecurrentall : test all items vac: test AC voltage vdc: test DC voltage rload: test load resistance riso: test isolation resistance cap: test capacitor ren: test REN va…
1.3.6.1.4.1.6321.1.2.3.4.4.5.4ScalarmltForceread-writecurrentForce test even the port is in use.
1.3.6.1.4.1.6321.1.2.3.4.4.5.5NodemltResult
1.3.6.1.4.1.6321.1.2.3.4.4.5.5.1ScalarmltVacTipread-onlycurrent
1.3.6.1.4.1.6321.1.2.3.4.4.5.5.2ScalarmltVacRingread-onlycurrent
1.3.6.1.4.1.6321.1.2.3.4.4.5.5.3ScalarmltVacDiffread-onlycurrent
1.3.6.1.4.1.6321.1.2.3.4.4.5.5.4ScalarmltVdcTipread-onlycurrent
1.3.6.1.4.1.6321.1.2.3.4.4.5.5.5ScalarmltVdcRingread-onlycurrent
1.3.6.1.4.1.6321.1.2.3.4.4.5.5.6ScalarmltVdcDiffread-onlycurrent
1.3.6.1.4.1.6321.1.2.3.4.4.5.5.7ScalarmltRLoopread-onlycurrent
1.3.6.1.4.1.6321.1.2.3.4.4.5.5.8ScalarmltRtgread-onlycurrent
1.3.6.1.4.1.6321.1.2.3.4.4.5.5.9ScalarmltRrgread-onlycurrent
1.3.6.1.4.1.6321.1.2.3.4.4.5.5.10ScalarmltRtrread-onlycurrent
1.3.6.1.4.1.6321.1.2.3.4.4.5.5.11ScalarmltCtgread-onlycurrent
1.3.6.1.4.1.6321.1.2.3.4.4.5.5.12ScalarmltCrgread-onlycurrent
1.3.6.1.4.1.6321.1.2.3.4.4.5.5.13ScalarmltCtrread-onlycurrent
1.3.6.1.4.1.6321.1.2.3.4.4.5.5.14ScalarmltRenread-onlycurrent
1.3.6.1.4.1.6321.1.2.3.4.4.5.5.15ScalarmltVRingread-onlycurrent
1.3.6.1.4.1.6321.1.2.3.4.4.5.5.16ScalarmltVMeteringread-onlycurrent
1.3.6.1.4.1.6321.1.2.3.4.4.5.5.17ScalarmltDialToneDetectedread-onlycurrent
1.3.6.1.4.1.6321.1.2.3.4.4.5.5.18ScalarmltDetectedDtmfCountread-onlycurrent
1.3.6.1.4.1.6321.1.2.3.4.4.5.5.19ScalarmltDialToneDelayread-onlycurrent
1.3.6.1.4.1.6321.1.2.3.4.4.5.6TablemltRelayTablenot-accessiblecurrentPerform specified MLT relay function, or turn off MLT relay function in specified subscriber.
1.3.6.1.4.1.6321.1.2.3.4.4.5.6.1RowmltRelayEntrynot-accessiblecurrentAn entry of mltRelayTable.
1.3.6.1.4.1.6321.1.2.3.4.4.5.6.1.1ColumnmltRelaySetread-writecurrentBy default, relay function is turned off.
1.3.6.1.4.1.6321.1.2.3.4.7Nodemulticast
1.3.6.1.4.1.6321.1.2.3.4.7.1ScalarigmpEnableread-writecurrentEnable/disable IGMP protocol.
1.3.6.1.4.1.6321.1.2.3.4.7.4NodemcastBandwidth
1.3.6.1.4.1.6321.1.2.3.4.7.4.1ScalarmcastDefaultBandwidthread-writecurrentDefault bandwidth requirement for a multicast channel.
1.3.6.1.4.1.6321.1.2.3.4.7.4.2ScalarmaxNumOfMcastBwread-onlycurrentThe maximum number of row entries that user can create in mcastBwTable.
1.3.6.1.4.1.6321.1.2.3.4.7.4.3TablemcastBwTablenot-accessiblecurrentThis table defines bandwidth budget for a range of multicast IP channels.
1.3.6.1.4.1.6321.1.2.3.4.7.4.3.1RowmcastBwEntrynot-accessiblecurrentAn entry of mcastBwTable.
1.3.6.1.4.1.6321.1.2.3.4.7.4.3.1.1ColumnmcastBwIndexread-onlycurrentThe index which specify the entry.
1.3.6.1.4.1.6321.1.2.3.4.7.4.3.1.2ColumnmcastBwStartIpread-onlycurrentThe start multicast IP of the bandwidth control range.
1.3.6.1.4.1.6321.1.2.3.4.7.4.3.1.3ColumnmcastBwEndIpread-onlycurrentThe end multicast IP of the bandwidth control range.
1.3.6.1.4.1.6321.1.2.3.4.7.4.3.1.4ColumnmcastBwBandwidthread-createcurrentThe bandwidth budget for the multicast IP channels.
1.3.6.1.4.1.6321.1.2.3.4.7.4.3.1.5ColumnmcastBwRowStatusread-createcurrentThe row status of the entry.
1.3.6.1.4.1.6321.1.2.3.4.7.4.4TablemcastBwPortTablenot-accessiblecurrentThis table specify the multicast bandwidth control of the port.
1.3.6.1.4.1.6321.1.2.3.4.7.4.4.1RowmcastBwPortEntrynot-accessiblecurrentAn entry of mcastBwPortTable.
1.3.6.1.4.1.6321.1.2.3.4.7.4.4.1.1ColumnmcastBwPortEnableread-writecurrentEnable/disable multicast bandwidth control for a port.
1.3.6.1.4.1.6321.1.2.3.4.7.4.4.1.2ColumnmcastBwPortBandwidthread-writecurrentSet bandwidth threshold for a port.
1.3.6.1.4.1.6321.1.2.3.4.7.5NodeigmpCount
1.3.6.1.4.1.6321.1.2.3.4.7.5.1TableigmpCountPortTablenot-accessiblecurrentThis table specify the IGMP count limiting of the port.
1.3.6.1.4.1.6321.1.2.3.4.7.5.1.1RowigmpCountPortEntrynot-accessiblecurrentAn entry of igmpCountPortTable.
1.3.6.1.4.1.6321.1.2.3.4.7.5.1.1.1ColumnigmpCountPortEnableread-writecurrentEnable/disable IGMP count limiting for a port.
1.3.6.1.4.1.6321.1.2.3.4.7.5.1.1.2ColumnigmpCountPortLimitread-writecurrentThe maximum allowed IGMP report count for a port.
1.3.6.1.4.1.6321.1.2.3.4.7.6Nodemvlan
1.3.6.1.4.1.6321.1.2.3.4.7.6.1ScalarmaxNumOfMvlanread-onlycurrentThe maximum number of row entries that user can create in mvlanTable.
1.3.6.1.4.1.6321.1.2.3.4.7.6.2TablemvlanTablenot-accessiblecurrentA table containing static configuration information for each multicast VLAN configured into the device.
1.3.6.1.4.1.6321.1.2.3.4.7.6.2.1RowmvlanEntrynot-accessiblecurrentAn entry of mvlanTable.
1.3.6.1.4.1.6321.1.2.3.4.7.6.2.1.1ColumnmvlanIndexread-onlycurrentThe VLAN-ID refering to this VLAN.
1.3.6.1.4.1.6321.1.2.3.4.7.6.2.1.2ColumnmvlanNameread-createcurrentAn administratively assigned string, which may be used to identify the VLAN.
1.3.6.1.4.1.6321.1.2.3.4.7.6.2.1.3ColumnmvlanEgressPortsread-createcurrentThe set of ports which are permanently assigned to the egress list for this multicast VLAN.
1.3.6.1.4.1.6321.1.2.3.4.7.6.2.1.4ColumnmvlanUntaggedPortsread-createcurrentThe set of ports which should transmit egress packets for this multicast VLAN as untagged.
1.3.6.1.4.1.6321.1.2.3.4.7.6.2.1.5ColumnmvlanRowStatusread-createcurrentThis object indicates the status of this entry.
1.3.6.1.4.1.6321.1.2.3.4.7.6.3TablemvlanTranslateTablenot-accessiblecurrentA table that contains multicast to VLAN translation.
1.3.6.1.4.1.6321.1.2.3.4.7.6.3.1RowmvlanTranslateEntrynot-accessiblecurrentAn entry of mvlanTranslateTable.
1.3.6.1.4.1.6321.1.2.3.4.7.6.3.1.1ColumnmvlanTranslateIndexread-onlycurrentThe index which specif the entry.
1.3.6.1.4.1.6321.1.2.3.4.7.6.3.1.2ColumnmvlanTranslateStartIpread-writecurrentThe start IP of the multicast VLAN translation.
1.3.6.1.4.1.6321.1.2.3.4.7.6.3.1.3ColumnmvlanTranslateEndIpread-writecurrentThe end IP of the multicast VLAN translation.
1.3.6.1.4.1.6321.1.2.3.4.7.7NodequeryVid
1.3.6.1.4.1.6321.1.2.3.4.7.7.1ScalarmaxNumOfQryVidread-onlycurrentThe maximum number of row entries that user can create in qryVidConfTable.
1.3.6.1.4.1.6321.1.2.3.4.7.7.2TableqryVidConfTablenot-accessiblecurrentThis table defines statically set VLANs used for response IGMP report.
1.3.6.1.4.1.6321.1.2.3.4.7.7.2.1RowqryVidConfEntrynot-accessiblecurrentAn entry in qryVidConfTable.
1.3.6.1.4.1.6321.1.2.3.4.7.7.2.1.1ColumnqryVidread-onlycurrentVLAN ID.
1.3.6.1.4.1.6321.1.2.3.4.7.7.2.1.2ColumnqryVidRowStatusread-createcurrentThis object indicates the status of this entry.
1.3.6.1.4.1.6321.1.2.3.4.7.7.3TableqryVidStatusTablenot-accessiblecurrentThis table shows statically set or dynamically learned VLANs used for response IGMP report.
1.3.6.1.4.1.6321.1.2.3.4.7.7.3.1RowqryVidStatusEntrynot-accessiblecurrentAn entry in qryVidStatusTable.
1.3.6.1.4.1.6321.1.2.3.4.7.7.3.1.1ColumnqryVidTyperead-onlycurrentVLAN type.
1.3.6.1.4.1.6321.1.2.3.4.7.9ScalarigmpVersionread-writecurrentSetting IGMP version.
1.3.6.1.4.1.6321.1.2.3.4.7.10ScalarigmpLeaveModeread-writecurrentConfigure IGMP leave message handling mode.
1.3.6.1.4.1.6321.1.2.3.4.7.11NodeigmpTimer
1.3.6.1.4.1.6321.1.2.3.4.7.11.1ScalarigmpQryIntervalread-writecurrentSet IGMP query interval, 10~1000 in seconds.
1.3.6.1.4.1.6321.1.2.3.4.7.11.2ScalarigmpRobustread-writecurrentSet IGMP query Robustness, 1~5.
1.3.6.1.4.1.6321.1.2.3.4.7.11.3ScalarigmpQryRespIntervalread-writecurrentSet IGMP query response interval, 1~100 in 100 milliseconds.
1.3.6.1.4.1.6321.1.2.3.4.7.11.4ScalarigmpLastMemQryIntervalread-writecurrentSet IGMP Last Member Query interval, 1~5 in 100 milliseconds.
1.3.6.1.4.1.6321.1.2.3.4.7.11.5ScalarigmpLastMemQryRobustread-writecurrentSet Last Member Query Robustness, 1~5.
1.3.6.1.4.1.6321.1.2.3.4.7.12NodeauditQuery
1.3.6.1.4.1.6321.1.2.3.4.7.12.1ScalarauditQryEnableread-writecurrentEnable/disable IGMP audit query.
1.3.6.1.4.1.6321.1.2.3.4.7.12.2ScalarauditQryIntervalread-writecurrentSet IGMP Audit Query Interval, 1~4 in 100 milliseconds.
1.3.6.1.4.1.6321.1.2.3.4.7.12.3ScalarauditQryRobustread-writecurrentSet IGMP Audit Query Robustness, 1~5.
1.3.6.1.4.1.6321.1.2.3.4.7.13NodeigmpProfile
1.3.6.1.4.1.6321.1.2.3.4.7.13.1ScalarmaxNumberOfIgmpProfilesread-onlycurrentThe max number of IGMP profiles in the system.
1.3.6.1.4.1.6321.1.2.3.4.7.13.2TableigmpProfileTablenot-accessiblecurrentA table that contains IGMP Profiles.
1.3.6.1.4.1.6321.1.2.3.4.7.13.2.1RowigmpProfileEntrynot-accessiblecurrentThe entry of IGMP Profile table.
1.3.6.1.4.1.6321.1.2.3.4.7.13.2.1.1ColumnigmpProfileNameread-onlycurrentThe IGMP Profile name.
1.3.6.1.4.1.6321.1.2.3.4.7.13.2.1.2ColumnigmpProfileEnableread-writecurrentEnable/disable IGMP Profile.
1.3.6.1.4.1.6321.1.2.3.4.7.13.2.1.3ColumnigmpProfileMaxGroupread-writecurrentSet maximum allowed multicast group, 1~64.
1.3.6.1.4.1.6321.1.2.3.4.7.13.2.1.4ColumnigmpProfileRowStatusread-createcurrentThe row status of the IGMP Profile entry.
1.3.6.1.4.1.6321.1.2.3.4.7.13.3TableigmpFilterTablenot-accessiblecurrentA table that contains IGMP Filters.
1.3.6.1.4.1.6321.1.2.3.4.7.13.3.1RowigmpFilterEntrynot-accessiblecurrentThe entry of IGMP Filter table.
1.3.6.1.4.1.6321.1.2.3.4.7.13.3.1.1ColumnigmpFilterIndexread-onlycurrentThe index which specifies the filter rule.
1.3.6.1.4.1.6321.1.2.3.4.7.13.3.1.2ColumnigmpFilterStartIpread-createcurrentThe start IP of the filter rule.
1.3.6.1.4.1.6321.1.2.3.4.7.13.3.1.3ColumnigmpFilterEndIpread-createcurrentThe end IP of the filter rule.
1.3.6.1.4.1.6321.1.2.3.4.7.13.4TableigmpProfilePortTablenot-accessiblecurrentThis table specifies the IGMP Profile of the port.
1.3.6.1.4.1.6321.1.2.3.4.7.13.4.1RowigmpProfilePortEntrynot-accessiblecurrentAn entry in igmpProfilePortTable.
1.3.6.1.4.1.6321.1.2.3.4.7.13.4.1.1ColumnigmpProfilePortProfileread-writecurrentThe IGMP Profile of the port.
1.3.6.1.4.1.6321.1.2.3.4.8Nodeport
1.3.6.1.4.1.6321.1.2.3.4.8.1TablesubrPortTablenot-accessiblecurrentThis table includes subscriber attributes for the port.
1.3.6.1.4.1.6321.1.2.3.4.8.1.1RowsubrPortEntrynot-accessiblecurrentAn entry in subrPortTable.
1.3.6.1.4.1.6321.1.2.3.4.8.1.1.1ColumnsubrPortNameread-writecurrentName of the subscriber.
1.3.6.1.4.1.6321.1.2.3.4.8.1.1.2ColumnsubrPortTelread-writecurrentTelephone number of the subscriber.
1.3.6.1.4.1.6321.1.2.3.4.8.3NodevdslPort
1.3.6.1.4.1.6321.1.2.3.4.8.3.1TablevdslLineConfTablenot-accessiblecurrentThis table includes common attributes describing the VDSL line. This table is supported by R2.00 and later versions.
1.3.6.1.4.1.6321.1.2.3.4.8.3.1.1RowvdslLineConfEntrynot-accessiblecurrentAn entry in vdslLineConfTable.
1.3.6.1.4.1.6321.1.2.3.4.8.3.1.1.1ColumnvdslLineConfUpboread-writecurrentEnable/disable upstream power backoff control.
1.3.6.1.4.1.6321.1.2.3.4.8.3.1.1.2ColumnvdslLineConfVdslProfileread-writecurrentSet VDSL profile.
1.3.6.1.4.1.6321.1.2.3.4.8.3.1.1.4ColumnvdslLineConfRfiBandread-writecurrentSet VDSL customized RFI configuration. disable: not apply RFI notch to port ansi: use pre-defined ANSI RFI notch etsi: use pre-defined ETSI notch custom: user …
1.3.6.1.4.1.6321.1.2.3.4.8.3.1.1.5ColumnvdslLineConfIpqosProfileread-writecurrent
1.3.6.1.4.1.6321.1.2.3.4.8.3.1.1.6ColumnvdslLineConfVturInpread-writecurrentVTUR minimum INP value
1.3.6.1.4.1.6321.1.2.3.4.8.3.1.1.7ColumnvdslLineConfVtucInpread-writecurrentVTUC mimimum INT value
1.3.6.1.4.1.6321.1.2.3.4.8.3.1.1.8ColumnvdslLineConfOptionMaskread-writecurrentBit1: disable Trellis coding in ADSL mode Bit2: disable Reed-Solomon coding for ADSL Bit3: disable upstream bitswaps Bit4: disable downstream bitwaps Bit5: dis…
1.3.6.1.4.1.6321.1.2.3.4.8.3.1.1.9ColumnvdslLineConfUpboForceLengthread-writecurrent-1 means max(kl0_CO,kl0_CPE). -2 means min(kl0_CO,kl0_CPE). -3 means kl0_CO. -4 means kl0_CPE. -5 means kl0_CPE + delta as calculated from.
1.3.6.1.4.1.6321.1.2.3.4.8.3.1.1.10ColumnvdslLineConfPsdShaperead-writecurrentPSD mask type
1.3.6.1.4.1.6321.1.2.3.4.8.3.1.1.11ColumnvdslLineConfDpboread-writecurrentEnable/Disable DPBO
1.3.6.1.4.1.6321.1.2.3.4.8.3.1.1.12ColumnvdslLineConfDpboParamEselread-writecurrentDPBO ESEL parameter
1.3.6.1.4.1.6321.1.2.3.4.8.3.1.1.13ColumnvdslLineConfDpboParamEscmaread-writecurrentDPBO ESCMA parameter -1~1.5 in step of 1/256.
1.3.6.1.4.1.6321.1.2.3.4.8.3.1.1.14ColumnvdslLineConfDpboParamEscmbread-writecurrentDPBO ESCMB parameter -1~1.5 in step of 1/256.
1.3.6.1.4.1.6321.1.2.3.4.8.3.1.1.15ColumnvdslLineConfDpboParamEscmcread-writecurrentDPBO ESCMC parameter -1~1.5 in step of 1/256.
1.3.6.1.4.1.6321.1.2.3.4.8.3.1.1.16ColumnvdslLineConfDpboParamMusread-writecurrentDPBO MUS parameter.
1.3.6.1.4.1.6321.1.2.3.4.8.3.1.1.17ColumnvdslLineConfDpboParamFminread-writecurrentDPBO FMIN parameter
1.3.6.1.4.1.6321.1.2.3.4.8.3.1.1.18ColumnvdslLineConfDpboParamFmaxread-writecurrentDPBO FMAX parameter
1.3.6.1.4.1.6321.1.2.3.4.8.3.1.1.19ColumnvdslLineConfDpboParamPsdIdread-writecurrentValid range for setting is 1~6.
1.3.6.1.4.1.6321.1.2.3.4.8.3.2NodevdslVlan
1.3.6.1.4.1.6321.1.2.3.4.8.3.2.1TablevdslPortConfTablenot-accessiblecurrentThis table includes common attributes describing the VDSL port. This table is supported by R2.00 and later versions.
1.3.6.1.4.1.6321.1.2.3.4.8.3.2.1.1RowvdslPortConfEntrynot-accessiblecurrentAn entry in vdslPortConfTable.
1.3.6.1.4.1.6321.1.2.3.4.8.3.2.1.1.4ColumnvdslPortConfTlsEnableread-writecurrentEnable/disable the transparent LAN service.
1.3.6.1.4.1.6321.1.2.3.4.8.3.2.1.1.5ColumnvdslPortConfTlsVidread-writecurrentThe transparent LAN service s-tag VID.
1.3.6.1.4.1.6321.1.2.3.4.8.3.2.1.1.6ColumnvdslPortConfTlsPriorityread-writecurrentThe transparent LAN service s-tag priority.
1.3.6.1.4.1.6321.1.2.3.4.8.3.2.1.1.7ColumnvdslPortConfDtEnableread-writecurrentEnable/disable the Double Tagging service.
1.3.6.1.4.1.6321.1.2.3.4.8.3.2.1.1.8ColumnvdslPortConfDtSVidread-writecurrentThe Double Tagging service s-tag VID.
1.3.6.1.4.1.6321.1.2.3.4.8.3.2.1.1.9ColumnvdslPortConfDtSPriorityread-writecurrentThe Double Tagging service s-tag priority.
1.3.6.1.4.1.6321.1.2.3.4.8.3.2.1.1.10ColumnvdslPortConfDtCVidread-writecurrentThe Double Tagging service c-tag VID.
1.3.6.1.4.1.6321.1.2.3.4.8.3.2.1.1.11ColumnvdslPortConfDtCPriorityread-writecurrentThe Double Tagging service c-tag priority.
1.3.6.1.4.1.6321.1.2.3.4.8.3.2.2TablevdslPortVlanTranslateTablenot-accessiblecurrentA table that contains VLAN translation.
1.3.6.1.4.1.6321.1.2.3.4.8.3.2.2.1RowvdslPortVlanTranslateEntrynot-accessiblecurrentAn entry in vdslPortVlanTranslateTable.
1.3.6.1.4.1.6321.1.2.3.4.8.3.2.2.1.1ColumnvdslPortVlanTranslateVpiread-onlycurrentVPI of the vtt.
1.3.6.1.4.1.6321.1.2.3.4.8.3.2.2.1.2ColumnvdslPortVlanTranslateVciread-onlycurrentVCI of the vtt.
1.3.6.1.4.1.6321.1.2.3.4.8.3.2.2.1.3ColumnvdslPortVlanTranslateCxvidread-onlycurrentCXVID of the vtt.
1.3.6.1.4.1.6321.1.2.3.4.8.3.2.2.1.4ColumnvdslPortVlanTranslateCvidread-onlycurrentCVID of the vtt.
1.3.6.1.4.1.6321.1.2.3.4.8.3.2.2.1.5ColumnvdslPortVlanTranslateSvidread-onlycurrentSVID of the vtt.
1.3.6.1.4.1.6321.1.2.3.4.8.3.2.2.1.6ColumnvdslPortVlanTranslateDsonlyread-onlycurrentDonwstream direction only of the vtt.
1.3.6.1.4.1.6321.1.2.3.4.8.3.2.2.1.7ColumnvdslPortVlanTranslateRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in this table.
1.3.6.1.4.1.6321.1.2.3.4.8.3.2.4TablevdslPortPvlanTablenot-accessiblecurrentProtocol VLAN configuration table.
1.3.6.1.4.1.6321.1.2.3.4.8.3.2.4.1RowvdslPortPvlanEntrynot-accessiblecurrentAn entry in vdslPortPvlanTable.
1.3.6.1.4.1.6321.1.2.3.4.8.3.2.4.1.1ColumnvdslPortPvlanEtyperead-onlycurrent0~0xffff.
1.3.6.1.4.1.6321.1.2.3.4.8.3.2.4.1.2ColumnvdslPortPvlanVidread-createcurrent
1.3.6.1.4.1.6321.1.2.3.4.8.3.2.4.1.3ColumnvdslPortPvlanPriorityread-createcurrent
1.3.6.1.4.1.6321.1.2.3.4.8.3.2.4.1.4ColumnvdslPortPvlanRowStatusread-createcurrent
1.3.6.1.4.1.6321.1.2.3.4.8.3.3TablevdslRfiCustomTablenot-accessiblecurrentThis table includes VDSL customized RFI configuration. This table is supported by R2.00 and later versions.
1.3.6.1.4.1.6321.1.2.3.4.8.3.3.1RowvdslRfiCustomEntrynot-accessiblecurrentAn entry in vdslRfiCustomTable.
1.3.6.1.4.1.6321.1.2.3.4.8.3.3.1.1ColumnvdslRfiCustomIndexread-onlycurrentIndex of the table.
1.3.6.1.4.1.6321.1.2.3.4.8.3.3.1.2ColumnvdslRfiCustomStartFreqread-writecurrentThe start value of the customized frequency range.
1.3.6.1.4.1.6321.1.2.3.4.8.3.3.1.3ColumnvdslRfiCustomEndFreqread-writecurrentThe end value of the customized frequency range.
1.3.6.1.4.1.6321.1.2.3.4.8.3.3.1.4ColumnvdslRfiCustomEnableread-writecurrentEnable or disable the customized frequency range setting.
1.3.6.1.4.1.6321.1.2.3.4.8.3.4TablevdslLineConfUpboParamTablenot-accessiblecurrentThis table includes VDSL UPBO configuration.
1.3.6.1.4.1.6321.1.2.3.4.8.3.4.1RowvdslLineConfUpboParamEntrynot-accessiblecurrentAn entry in vdslLineConfUpboParamTable.
1.3.6.1.4.1.6321.1.2.3.4.8.3.4.1.1ColumnvdslLineConfUpboParamBandread-onlycurrentIndex of the table.
1.3.6.1.4.1.6321.1.2.3.4.8.3.4.1.2ColumnvdslLineConfUpboParamAread-writecurrent
1.3.6.1.4.1.6321.1.2.3.4.8.3.4.1.3ColumnvdslLineConfUpboParamBread-writecurrent
1.3.6.1.4.1.6321.1.2.3.4.8.3.5TablevdslLineConfDpboTablenot-accessiblecurrentThis table includes VDSL DPBO configuration.
1.3.6.1.4.1.6321.1.2.3.4.8.3.5.1RowvdslLineConfDpboEntrynot-accessiblecurrentAn entry in vdslLineConfDpboTable.
1.3.6.1.4.1.6321.1.2.3.4.8.3.5.1.1ColumnvdslLineConfDpboIndexread-onlycurrentIndex of the table.
1.3.6.1.4.1.6321.1.2.3.4.8.3.5.1.2ColumnvdslLineConfDpboToneread-writecurrent
1.3.6.1.4.1.6321.1.2.3.4.8.3.5.1.3ColumnvdslLineConfDpboPsdread-writecurrent
1.3.6.1.4.1.6321.1.2.3.4.8.4Nodepvc
1.3.6.1.4.1.6321.1.2.3.4.8.4.1ScalarmaxNumOfPvcsread-onlycurrentThe maximum number of PVCs which could be created on a port.
1.3.6.1.4.1.6321.1.2.3.4.8.4.2TablepvcTablenot-accessiblecurrentThis table includes PVC configuration.
1.3.6.1.4.1.6321.1.2.3.4.8.4.2.1RowpvcEntrynot-accessiblecurrentAn entry in pvcTable.
1.3.6.1.4.1.6321.1.2.3.4.8.4.2.1.1ColumnpvcVpiread-onlycurrentVPI of the pvc.
1.3.6.1.4.1.6321.1.2.3.4.8.4.2.1.2ColumnpvcVciread-onlycurrentVCI of the pvc.
1.3.6.1.4.1.6321.1.2.3.4.8.4.2.1.3ColumnpvcPvidread-onlycurrentDefault VID of the pvc.
1.3.6.1.4.1.6321.1.2.3.4.8.4.2.1.5ColumnpvcPriorityread-createcurrent802.1p default priority of the pvc.
1.3.6.1.4.1.6321.1.2.3.4.8.4.2.1.6ColumnpvcProfileread-createcurrentThe value of this object identifies the row in the ipqosProfileTable.
1.3.6.1.4.1.6321.1.2.3.4.8.4.2.1.7ColumnpvcEncapread-createcurrentEncapsulation of the pvc.
1.3.6.1.4.1.6321.1.2.3.4.8.4.2.1.8ColumnpvcRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in this table.
1.3.6.1.4.1.6321.1.2.3.4.8.4.2.1.11ColumnpvcAcNameread-createcurrentAccess concentrator name for paepvc.
1.3.6.1.4.1.6321.1.2.3.4.8.4.2.1.12ColumnpvcServiceNameread-createcurrentService name for paepvc.
1.3.6.1.4.1.6321.1.2.3.4.8.4.2.1.13ColumnpvcHelloTimeread-createcurrentThe system will close the PVC if there are not any LCP echo messages passed through during the LCP hello time.
1.3.6.1.4.1.6321.1.2.3.4.8.4.2.1.14ColumnpvcAutoread-createcurrentEnable/disable auto detection for PPPoE/PPPoA encapsulation.
1.3.6.1.4.1.6321.1.2.3.4.8.4.3TablepvcStateTablenot-accessiblecurrentThis table show current PVC status.
1.3.6.1.4.1.6321.1.2.3.4.8.4.3.1RowpvcStateEntrynot-accessiblecurrentAn entry in pvcStateTable.
1.3.6.1.4.1.6321.1.2.3.4.8.4.3.1.1ColumnpvcStateVpiread-onlycurrentVPI of the pvc.
1.3.6.1.4.1.6321.1.2.3.4.8.4.3.1.2ColumnpvcStateVciread-onlycurrentVCI of the pvc.
1.3.6.1.4.1.6321.1.2.3.4.8.4.3.1.3ColumnpvcStatePvidread-onlycurrentDefault VID of the pvc.
1.3.6.1.4.1.6321.1.2.3.4.8.4.3.1.4ColumnpvcStatePriorityread-onlycurrent802.1p default priority of the pvc.
1.3.6.1.4.1.6321.1.2.3.4.8.4.3.1.8ColumnpvcStateChannelTyperead-onlycurrentThe value of this object identifies the channel type at runtime.
1.3.6.1.4.1.6321.1.2.3.4.8.4.3.1.9ColumnpvcStateEncapread-onlycurrentThe value of this object identifies the channel encapsulation at runtime.
1.3.6.1.4.1.6321.1.2.3.4.8.8Noderpvc
1.3.6.1.4.1.6321.1.2.3.4.8.8.1TablerpvcGatewayTablenot-accessiblecurrentThis table includes Routed Gateway configuration.
1.3.6.1.4.1.6321.1.2.3.4.8.8.1.1RowrpvcGatewayEntrynot-accessiblecurrentAn entry in Routed Gateway table.
1.3.6.1.4.1.6321.1.2.3.4.8.8.1.1.1ColumnrpvcGatewayIpread-onlycurrentIP of RPVC gateway.
1.3.6.1.4.1.6321.1.2.3.4.8.8.1.1.2ColumnrpvcGatewayVlanIdread-writecurrentVlan id send to this RPVC gateway.
1.3.6.1.4.1.6321.1.2.3.4.8.8.1.1.3ColumnrpvcGatewayRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in this table.
1.3.6.1.4.1.6321.1.2.3.4.8.8.1.1.4ColumnrpvcGatewayPriorityread-writecurrent802.1p p bit send to this RPVC gateway.
1.3.6.1.4.1.6321.1.2.3.4.8.8.2TablerpvcTablenot-accessiblecurrentThis table includes RPVC configuration.
1.3.6.1.4.1.6321.1.2.3.4.8.8.2.1RowrpvcEntrynot-accessiblecurrentAn entry in rpvcTable.
1.3.6.1.4.1.6321.1.2.3.4.8.8.2.1.1ColumnrpvcVpiread-onlycurrentVPI of the rpvc.
1.3.6.1.4.1.6321.1.2.3.4.8.8.2.1.2ColumnrpvcVciread-onlycurrentVCI of the rpvc.
1.3.6.1.4.1.6321.1.2.3.4.8.8.2.1.3ColumnrpvcEncapread-createcurrentEncapsulation of the rpvc.
1.3.6.1.4.1.6321.1.2.3.4.8.8.2.1.4ColumnrpvcProfileread-createcurrentThe ipqos profile of the rpvc.
1.3.6.1.4.1.6321.1.2.3.4.8.8.2.1.5ColumnrpvcIpread-onlycurrentThe IP of the rpvc.
1.3.6.1.4.1.6321.1.2.3.4.8.8.2.1.6ColumnrpvcNetmaskread-onlycurrentThe IP mask of the rpvc IP.
1.3.6.1.4.1.6321.1.2.3.4.8.8.2.1.7ColumnrpvcGatewayIpAddressread-createcurrentThe gateway IP of rpvc.
1.3.6.1.4.1.6321.1.2.3.4.8.8.2.1.8ColumnrpvcRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in this table.
1.3.6.1.4.1.6321.1.2.3.4.8.8.3TablerpvcRouteDomainTablenot-accessiblecurrentThis table includes RPVC route domain configuration.
1.3.6.1.4.1.6321.1.2.3.4.8.8.3.1RowrpvcRouteDomainEntrynot-accessiblecurrentAn entry in rpvcRouteDomainTable.
1.3.6.1.4.1.6321.1.2.3.4.8.8.3.1.1ColumnrpvcRouteDomainVpiread-onlycurrentVPI of the rpvc.
1.3.6.1.4.1.6321.1.2.3.4.8.8.3.1.2ColumnrpvcRouteDomainVciread-onlycurrentVCI of the rpvc.
1.3.6.1.4.1.6321.1.2.3.4.8.8.3.1.3ColumnrpvcRouteDomainIpread-onlycurrentThe route domain IP.
1.3.6.1.4.1.6321.1.2.3.4.8.8.3.1.4ColumnrpvcRouteDomainNetmaskread-onlycurrentThe IP mask of the route domain IP.
1.3.6.1.4.1.6321.1.2.3.4.8.8.3.1.5ColumnrpvcRouteDomainRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in this table.
1.3.6.1.4.1.6321.1.2.3.4.8.8.4ScalarrpvcArpAgingTimeread-writecurrentSet RPVC ARP proxy aging time 10..10000 seconds, 0 to disable againg.
1.3.6.1.4.1.6321.1.2.3.4.8.8.5ScalarrpvcArpFlushread-writecurrentFlush the RPVC ARP proxy table.
1.3.6.1.4.1.6321.1.2.3.4.8.9TabledsBcastDisableTablenot-accessiblecurrentThis table includes Down Stream Bcast configuration.
1.3.6.1.4.1.6321.1.2.3.4.8.9.1RowdsBcastDisableEntrynot-accessiblecurrentAn entry in Down Stream Bcast table.
1.3.6.1.4.1.6321.1.2.3.4.8.9.1.1ColumndsBcastDisableVlanIdread-onlycurrentdownstream broadcast disabled vid.
1.3.6.1.4.1.6321.1.2.3.4.8.9.1.2ColumndsBcastDisableRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in this table.
1.3.6.1.4.1.6321.1.2.3.4.8.10Nodepaepvc
1.3.6.1.4.1.6321.1.2.3.4.8.10.1TablepaepvcTablenot-accessiblecurrentThis table includes PPPoAoE PVC configuration.
1.3.6.1.4.1.6321.1.2.3.4.8.10.1.1RowpaepvcEntrynot-accessiblecurrentAn entry of paepvcTable.
1.3.6.1.4.1.6321.1.2.3.4.8.10.1.1.1ColumnpaepvcVpiread-onlycurrentVPI of the pvc.
1.3.6.1.4.1.6321.1.2.3.4.8.10.1.1.2ColumnpaepvcVciread-onlycurrentVCI of the pvc.
1.3.6.1.4.1.6321.1.2.3.4.8.10.1.1.3ColumnpaepvcPvidread-onlycurrentDefault VID of the pvc.
1.3.6.1.4.1.6321.1.2.3.4.8.10.1.1.4ColumnpaepvcEncapread-createcurrentEncapsulation of the paepvc.
1.3.6.1.4.1.6321.1.2.3.4.8.10.1.1.5ColumnpaepvcPriorityread-createcurrent802.1p default priority of the pvc.
1.3.6.1.4.1.6321.1.2.3.4.8.10.1.1.6ColumnpaepvcProfileread-createcurrentThe value of this object identifies the row in the ipqosProfileTable.
1.3.6.1.4.1.6321.1.2.3.4.8.10.1.1.7ColumnpaepvcAcNameread-createcurrentAccess concentrator name.
1.3.6.1.4.1.6321.1.2.3.4.8.10.1.1.8ColumnpaepvcServiceNameread-createcurrentService name.
1.3.6.1.4.1.6321.1.2.3.4.8.10.1.1.9ColumnpaepvcHelloTimeread-createcurrentThe system will close the PVC if there are not any LCP echo messages passed through during the LCP hello time.
1.3.6.1.4.1.6321.1.2.3.4.8.10.1.1.10ColumnpaepvcRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in this table.
1.3.6.1.4.1.6321.1.2.3.4.8.10.1.1.12ColumnpaepvcCvidread-createcurrentDefault C-VID of the pvc.
1.3.6.1.4.1.6321.1.2.3.4.8.10.1.1.13ColumnpaepvcCPriorityread-createcurrent802.1p default C-priority of the pvc.
1.3.6.1.4.1.6321.1.2.3.4.8.11Nodetlspvc
1.3.6.1.4.1.6321.1.2.3.4.8.11.1TabletlspvcTablenot-accessiblecurrentThis table includes Transparent LAN Service (TLS) PVC configuration.
1.3.6.1.4.1.6321.1.2.3.4.8.11.1.1RowtlspvcEntrynot-accessiblecurrentAn entry of tlspvcTable.
1.3.6.1.4.1.6321.1.2.3.4.8.11.1.1.1ColumntlspvcVpiread-onlycurrentVPI of the pvc.
1.3.6.1.4.1.6321.1.2.3.4.8.11.1.1.2ColumntlspvcVciread-onlycurrentVCI of the pvc.
1.3.6.1.4.1.6321.1.2.3.4.8.11.1.1.3ColumntlspvcSvidread-onlycurrents-tag VLAN ID of the pvc.
1.3.6.1.4.1.6321.1.2.3.4.8.11.1.1.4ColumntlspvcEncapread-createcurrentEncapsulation of the tlspvc.
1.3.6.1.4.1.6321.1.2.3.4.8.11.1.1.5ColumntlspvcSpriorityread-createcurrents-tag priority of the pvc.
1.3.6.1.4.1.6321.1.2.3.4.8.11.1.1.6ColumntlspvcProfileread-createcurrentThe value of this object identifies the row in the ipqosProfileTable.
1.3.6.1.4.1.6321.1.2.3.4.8.11.1.1.7ColumntlspvcRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in this table.
1.3.6.1.4.1.6321.1.2.3.4.8.13Nodedtpvc
1.3.6.1.4.1.6321.1.2.3.4.8.13.1TabledtpvcTablenot-accessiblecurrentThis table includes Double Tagging (DT) PVC configuration.
1.3.6.1.4.1.6321.1.2.3.4.8.13.1.1RowdtpvcEntrynot-accessiblecurrentAn entry of dtpvcTable.
1.3.6.1.4.1.6321.1.2.3.4.8.13.1.1.1ColumndtpvcVpiread-onlycurrentVPI of the pvc.
1.3.6.1.4.1.6321.1.2.3.4.8.13.1.1.2ColumndtpvcVciread-onlycurrentVCI of the pvc.
1.3.6.1.4.1.6321.1.2.3.4.8.13.1.1.3ColumndtpvcSvidread-onlycurrents-tag VLAN ID of the pvc.
1.3.6.1.4.1.6321.1.2.3.4.8.13.1.1.4ColumndtpvcSpriorityread-createcurrents-tag priority of the pvc.
1.3.6.1.4.1.6321.1.2.3.4.8.13.1.1.5ColumndtpvcCvidread-createcurrentc-tag VLAN ID of the pvc.
1.3.6.1.4.1.6321.1.2.3.4.8.13.1.1.6ColumndtpvcCpriorityread-createcurrentc-tag priority of the pvc.
1.3.6.1.4.1.6321.1.2.3.4.8.13.1.1.7ColumndtpvcEncapread-createcurrentEncapsulation of the dtpvc.
1.3.6.1.4.1.6321.1.2.3.4.8.13.1.1.8ColumndtpvcProfileread-createcurrentThe value of this object identifies the row in the ipqosProfileTable.
1.3.6.1.4.1.6321.1.2.3.4.8.13.1.1.9ColumndtpvcRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in this table.
1.3.6.1.4.1.6321.1.2.3.4.8.13.1.1.10ColumndtpvcSuperChannelread-createcurrentSpecified the configured DTPVC is a super channel.
1.3.6.1.4.1.6321.1.2.3.4.8.13.1.1.11ColumndtpvcAcNameread-createcurrentAccess concentrator name for paepvc.
1.3.6.1.4.1.6321.1.2.3.4.8.13.1.1.12ColumndtpvcServiceNameread-createcurrentService name for paepvc.
1.3.6.1.4.1.6321.1.2.3.4.8.13.1.1.13ColumndtpvcHelloTimeread-createcurrentThe system will close the PVC if there are not any LCP echo messages passed through during the LCP hello time.
1.3.6.1.4.1.6321.1.2.3.4.8.13.1.1.14ColumndtpvcAutoread-createcurrentEnable/disable auto detection for PPPoE/PPPoA encapsulation.
1.3.6.1.4.1.6321.1.2.3.4.8.13.2TabledtpvcStateTablenot-accessiblecurrentThis table show current DTPVC status.
1.3.6.1.4.1.6321.1.2.3.4.8.13.2.1RowdtpvcStateEntrynot-accessiblecurrentAn entry in dtpvcStateTable.
1.3.6.1.4.1.6321.1.2.3.4.8.13.2.1.1ColumndtpvcStateVpiread-onlycurrentVPI of the dtpvc.
1.3.6.1.4.1.6321.1.2.3.4.8.13.2.1.2ColumndtpvcStateVciread-onlycurrentVCI of the dtpvc.
1.3.6.1.4.1.6321.1.2.3.4.8.13.2.1.3ColumndtpvcStateSvidread-onlycurrentDefault S-VID of the dtpvc.
1.3.6.1.4.1.6321.1.2.3.4.8.13.2.1.4ColumndtpvcStateSPriorityread-onlycurrentS-priority of the dtpvc.
1.3.6.1.4.1.6321.1.2.3.4.8.13.2.1.5ColumndtpvcStateCvidread-onlycurrentDefault C-VID of the dtpvc.
1.3.6.1.4.1.6321.1.2.3.4.8.13.2.1.6ColumndtpvcStateCPriorityread-onlycurrentC-priority of the dtpvc.
1.3.6.1.4.1.6321.1.2.3.4.8.13.2.1.8ColumndtpvcStateChannelTyperead-onlycurrentThe value of this object identifies the channel type at runtime.
1.3.6.1.4.1.6321.1.2.3.4.8.13.2.1.9ColumndtpvcStateEncapread-onlycurrentThe value of this object identifies the channel encapsulation at runtime.
1.3.6.1.4.1.6321.1.2.3.4.8.14NodevoipPort
1.3.6.1.4.1.6321.1.2.3.4.8.14.1TablevoipSipLineConfTablenot-accessiblecurrentThis table includes common attributes describing the VoIP line.
1.3.6.1.4.1.6321.1.2.3.4.8.14.1.1RowvoipSipLineConfEntrynot-accessiblecurrentAn entry in voipSipLineConfTable.
1.3.6.1.4.1.6321.1.2.3.4.8.14.1.1.1ColumnvoipSipLineConfSipProfileread-writecurrentSIP profile name.
1.3.6.1.4.1.6321.1.2.3.4.8.14.1.1.2ColumnvoipSipLineConfSipCallSvcProfileread-writecurrentSIP call service profile name.
1.3.6.1.4.1.6321.1.2.3.4.8.14.1.1.3ColumnvoipSipLineConfDspProfileread-writecurrentDSP profile name.
1.3.6.1.4.1.6321.1.2.3.4.8.14.2NodeportOperations
1.3.6.1.4.1.6321.1.2.3.4.8.14.2.1ScalarvoipPortTargetread-writecurrentThe managed object is used for identify the target on which the port configuration should be performed. The target is encoded as: Byte 1: 0, Reserved(chaises) …
1.3.6.1.4.1.6321.1.2.3.4.8.14.2.2ScalarvoipPortOpsread-writecurrentThe managed object is for VoIP configuration. When the EMS wants to issue the desired operation, the EMS shall send SNMP-SET message to set the corresponding b…
1.3.6.1.4.1.6321.1.2.3.4.8.14.3TablevoipPortTelTablenot-accessiblecurrentThis table includes VoIP tel for the port.
1.3.6.1.4.1.6321.1.2.3.4.8.14.3.1RowvoipPortTelEntrynot-accessiblecurrentAn entry in voipPortTelTable.
1.3.6.1.4.1.6321.1.2.3.4.8.14.3.1.1ColumnvoipPortTelread-writecurrentVoIP's telephone number of the specified port.
1.3.6.1.4.1.6321.1.2.3.4.8.14.4TablevoipH248LineConfTablenot-accessiblecurrentThis table includes common attributes describing the VoIP line.
1.3.6.1.4.1.6321.1.2.3.4.8.14.4.1RowvoipH248LineConfEntrynot-accessiblecurrentAn entry in voipH248LineConfTable.
1.3.6.1.4.1.6321.1.2.3.4.8.14.4.1.1ColumnvoipH248LineConfMgNameread-onlycurrentMG name.
1.3.6.1.4.1.6321.1.2.3.4.8.14.4.1.2ColumnvoipH248LineConfDspProfileread-writecurrentDSP profile name.
1.3.6.1.4.1.6321.1.2.3.4.8.14.4.1.3ColumnvoipH248LineConfVBDProfileread-writecurrentDSP profile name for Voice Band Data (FAX or Modem) mode.
1.3.6.1.4.1.6321.1.2.3.4.8.14.5TablevoipPortH248TerminationTablenot-accessiblecurrentThis table includes Termination name.
1.3.6.1.4.1.6321.1.2.3.4.8.14.5.1RowvoipPortH248TerminationEntrynot-accessiblecurrentAn entry in voipPortH248TerminationTable.
1.3.6.1.4.1.6321.1.2.3.4.8.14.5.1.1ColumnvoipPortH248TermNameread-onlycurrentTermination name of MG.
1.3.6.1.4.1.6321.1.2.3.4.8.14.6TablevoipPortGainTablenot-accessiblecurrentThis table includes Port Gain.
1.3.6.1.4.1.6321.1.2.3.4.8.14.6.1RowvoipPortGainEntrynot-accessiblecurrentAn entry in voipPortGainTable.
1.3.6.1.4.1.6321.1.2.3.4.8.14.6.1.1ColumnvoipPortTXGainread-writecurrentTX Gain of the port, -200~200 in unit of 0.1dB.
1.3.6.1.4.1.6321.1.2.3.4.8.14.6.1.2ColumnvoipPortRXGainread-writecurrentRX Gain of the port, -200~200 in unit of 0.1dB.
1.3.6.1.4.1.6321.1.2.3.4.8.14.7TablevoipPortSeizureModeTablenot-accessiblecurrentThis table includes Port Seizure Mode.
1.3.6.1.4.1.6321.1.2.3.4.8.14.7.1RowvoipPortSeizureModeEntrynot-accessiblecurrentAn entry in voipPortSeizureModeTable.
1.3.6.1.4.1.6321.1.2.3.4.8.14.7.1.1ColumnvoipPortSeizureModeread-writecurrentPort Seizure Mode.
1.3.6.1.4.1.6321.1.2.3.4.8.14.8TablevoipPortSipAuthTablenot-accessiblecurrentThis table includes VoIP port SIP authentication related configuration.
1.3.6.1.4.1.6321.1.2.3.4.8.14.8.1RowvoipPortSipAuthEntrynot-accessiblecurrentAn entry in voipPortSipAuthTable.
1.3.6.1.4.1.6321.1.2.3.4.8.14.8.1.1ColumnvoipPortSipAuthModeread-writecurrentAuthentication mode for VoIP port SIP registration.
1.3.6.1.4.1.6321.1.2.3.4.8.14.8.1.2ColumnvoipPortSipAuthUsernameread-writecurrentVoIP port SIP registration username.
1.3.6.1.4.1.6321.1.2.3.4.8.14.8.1.3ColumnvoipPortSipAuthPasswdOnread-writecurrentPassword is necessary or not for VoIP port SIP registration.
1.3.6.1.4.1.6321.1.2.3.4.8.14.8.1.4ColumnvoipPortSipAuthPasswdread-writecurrentVoIP port SIP registration password.
1.3.6.1.4.1.6321.1.2.3.4.8.14.9TablevoipPortSipCallsvcTablenot-accessiblecurrentThis table includes VoIp port SIP call service related configuration.
1.3.6.1.4.1.6321.1.2.3.4.8.14.9.1RowvoipPortSipCallsvcEntrynot-accessiblecurrentAn entry in voipPortSipCallsvcTable.
1.3.6.1.4.1.6321.1.2.3.4.8.14.9.1.1ColumnvoipPortSipCallsvcModeread-writecurrentVoIP port SIP call service mode.
1.3.6.1.4.1.6321.1.2.3.4.8.14.9.1.2ColumnvoipPortSipCallsvcStateMaskread-writecurrentBit 1 callforward : call forward(Not supported) Bit 2 callhold : call hold Bit 3 callwait : call waiting Bit 4 callreturn : call return(Not supported) Bit 5 ca…
1.3.6.1.4.1.6321.1.2.3.4.8.14.9.1.3ColumnvoipPortSipCallsvcCPCOnread-writecurrentPerform calling party control, or turn off.
1.3.6.1.4.1.6321.1.2.3.4.8.14.9.1.4ColumnvoipPortSipCallsvcCPCTimeoutread-writecurrentVoIP port SIP delay hang up time of called party in seconds.
1.3.6.1.4.1.6321.1.2.3.4.8.15NodesnrMgn
1.3.6.1.4.1.6321.1.2.3.4.8.15.1TablesnrMgnTablenot-accessiblecurrentA table containing the per port SNR Margin configuration.
1.3.6.1.4.1.6321.1.2.3.4.8.15.1.1RowsnrMgnEntrynot-accessiblecurrentAn entry of snrMgnTable.
1.3.6.1.4.1.6321.1.2.3.4.8.15.1.1.1ColumnsnrMgnModeread-writecurrentConfigure DSL SNR margin configuration mode of the specified ports. Profile: the SNR margin configuration comes from DSL profile. Line: the SNR margin configur…
1.3.6.1.4.1.6321.1.2.3.4.8.15.1.1.2ColumnsnrMgnUcTargetread-writecurrentConfigured Target Signal/Noise Margin. This is the Noise Margin the modem must achieve with a BER of 10-7 or better to successfully complete initialization.
1.3.6.1.4.1.6321.1.2.3.4.8.15.1.1.3ColumnsnrMgnUcMaxread-writecurrentConfigured Maximum acceptable Signal/Noise Margin. If the Noise Margin is above this the modem should attempt to reduce its power output to optimize its operat…
1.3.6.1.4.1.6321.1.2.3.4.8.15.1.1.4ColumnsnrMgnUcMinread-writecurrentConfigured Minimum acceptable Signal/Noise Margin. If the noise margin falls below this level, the modem should attempt to increase its power output. If that i…
1.3.6.1.4.1.6321.1.2.3.4.8.15.1.1.5ColumnsnrMgnUcDownshiftread-writecurrentConfigured Signal/Noise Margin for rate downshift. If the noise margin falls below this level, the modem should attempt to decrease its transmit rate. In the c…
1.3.6.1.4.1.6321.1.2.3.4.8.15.1.1.6ColumnsnrMgnUcUpshiftread-writecurrentConfigured Signal/Noise Margin for rate upshift. If the noise margin rises above this level, the modem should attempt to increase its transmit rate. In the cas…
1.3.6.1.4.1.6321.1.2.3.4.8.15.1.1.7ColumnsnrMgnUrTargetread-writecurrentConfigured Target Signal/Noise Margin. This is the Noise Margin the modem must achieve with a BER of 10-7 or better to successfully complete initialization.
1.3.6.1.4.1.6321.1.2.3.4.8.15.1.1.8ColumnsnrMgnUrMaxread-writecurrentConfigured Maximum acceptable Signal/Noise Margin. If the Noise Margin is above this the modem should attempt to reduce its power output to optimize its operat…
1.3.6.1.4.1.6321.1.2.3.4.8.15.1.1.9ColumnsnrMgnUrMinread-writecurrentConfigured Minimum acceptable Signal/Noise Margin. If the noise margin falls below this level, the modem should attempt to increase its power output. If that i…
1.3.6.1.4.1.6321.1.2.3.4.8.15.1.1.10ColumnsnrMgnUrDownshiftread-writecurrentConfigured Signal/Noise Margin for rate downshift. If the noise margin falls below this level, the modem should attempt to decrease its transmit rate. In the c…
1.3.6.1.4.1.6321.1.2.3.4.8.15.1.1.11ColumnsnrMgnUrUpshiftread-writecurrentConfigured Signal/Noise Margin for rate upshift. If the noise margin rises above this level, the modem should attempt to increase its transmit rate. In the cas…
1.3.6.1.4.1.6321.1.2.3.4.8.16NodedslRate
1.3.6.1.4.1.6321.1.2.3.4.8.16.1TabledslRateTablenot-accessiblecurrentA table containing the per port DSL Rate configuration.
1.3.6.1.4.1.6321.1.2.3.4.8.16.1.1RowdslRateEntrynot-accessiblecurrentAn entry of dslRateTable.
1.3.6.1.4.1.6321.1.2.3.4.8.16.1.1.1ColumndslRateModeread-writecurrentConfigure DSL Rate configuration mode of the specified ports. Profile: the DSL Rate configuration comes from DSL profile. Line: the DSL Rate configuration come…
1.3.6.1.4.1.6321.1.2.3.4.8.16.1.1.2ColumndslRateLatencyModeread-onlycurrentThe latency mode is fast or interleave
1.3.6.1.4.1.6321.1.2.3.4.8.16.1.1.3ColumndslRateXtucMaxInterleaveDelayread-writecurrentConfigured maximum Interleave Delay for this channel. Interleave delay applies only to the interleave channel and defines the mapping (relative spacing) betwee…
1.3.6.1.4.1.6321.1.2.3.4.8.16.1.1.4ColumndslRateXtucMaxTxRateread-writecurrentConfigured Maximum Transmit rate for `Fast' or `Interleave' channels, in bps.
1.3.6.1.4.1.6321.1.2.3.4.8.16.1.1.5ColumndslRateXtucMinTxRateread-writecurrentConfigured Minimum Transmit rate for `Fast' or `Interleave' channels, in bps
1.3.6.1.4.1.6321.1.2.3.4.8.16.1.1.6ColumndslRateXturMaxInterleaveDelayread-writecurrentConfigured maximum Interleave Delay for this channel. Interleave delay applies only to the interleave channel and defines the mapping (relative spacing) betwee…
1.3.6.1.4.1.6321.1.2.3.4.8.16.1.1.7ColumndslRateXturMaxTxRateread-writecurrentConfigured Target Signal/Noise Margin. This is the Noise Margin the modem must achieve with a BER of 10-7 or better to successfully complete initialization.
1.3.6.1.4.1.6321.1.2.3.4.8.16.1.1.8ColumndslRateXturMinTxRateread-writecurrentConfigured Maximum Transmit rate for `Fast' or `Interleave' channels, in bps.
1.3.6.1.4.1.6321.1.2.3.4.8.51Nodegbond
1.3.6.1.4.1.6321.1.2.3.4.8.51.1TablegbondGroupTablenot-accessiblecurrentA table containing the G.Bond configuration information for each bonding group of the device.
1.3.6.1.4.1.6321.1.2.3.4.8.51.1.1RowgbondGroupEntrynot-accessiblecurrentAn entry of gbondTable.
1.3.6.1.4.1.6321.1.2.3.4.8.51.1.1.1ColumngbondGroupNameread-onlycurrentAn administratively assigned string, which may be used to identify bonding group.
1.3.6.1.4.1.6321.1.2.3.4.8.51.1.1.2ColumngbondGroupPortsread-createcurrentThe set of ports which are currently assigned to the bonding group of specified group name. Byte 1: Reserved(chassis) Byte 2~3: Reserved(slot) Byte 4: Reserved…
1.3.6.1.4.1.6321.1.2.3.4.8.51.1.1.4ColumngbondGroupUpRateread-onlycurrentThe UP stream rate.
1.3.6.1.4.1.6321.1.2.3.4.8.51.1.1.5ColumngbondGroupDownRateread-onlycurrentThe DOWN stream rate.
1.3.6.1.4.1.6321.1.2.3.4.8.51.1.1.6ColumngbondGroupRowStatusread-createcurrentThis object indicates the status of this entry.
1.3.6.1.4.1.6321.1.2.3.4.9Nodeprofile
1.3.6.1.4.1.6321.1.2.3.4.9.1NodesraShiftMarginProfile
1.3.6.1.4.1.6321.1.2.3.4.9.1.1TablesraShiftMarginProfileTablenot-accessiblecurrentThis table includes sra shift margin related configuration.
1.3.6.1.4.1.6321.1.2.3.4.9.1.1.1RowsraShiftMarginProfileEntrynot-accessiblecurrentAn entry in ipqosProfileTable.
1.3.6.1.4.1.6321.1.2.3.4.9.1.1.1.1ColumnsraShiftMarginProfileNameread-onlycurrentThis object identifies a row in this table.
1.3.6.1.4.1.6321.1.2.3.4.9.1.1.1.2ColumnxtucConfDownshiftSnrMgnread-createcurrentSpecifies the downstream SRA Down Shift Margin in units of 0.25 dB, for a range of 0 to 31.75 dB. in unit of 1 db.
1.3.6.1.4.1.6321.1.2.3.4.9.1.1.1.3ColumnxtucConfUpshiftSnrMgnread-createcurrentSpecifies the downstream SRA UP Shift Margin in units of 0.25 dB, for a range of 0 to 31.75 dB. in unit of 1 db.
1.3.6.1.4.1.6321.1.2.3.4.9.1.1.1.4ColumnxtucConfDownshiftTimeread-onlycurrentSpecifies the downstream SRA Down Shift time in units of 1 sec , for a range of 0 to 16383 sec. in unit of 1 sec.
1.3.6.1.4.1.6321.1.2.3.4.9.1.1.1.5ColumnxtucConfUpshiftTimeread-onlycurrentSpecifies the downstream SRA UP Shift time in units of 1 sec , for a range of 0 to 16383 sec. in unit of 1 sec.
1.3.6.1.4.1.6321.1.2.3.4.9.1.1.1.6ColumnxturConfDownshiftSnrMgnread-createcurrentSpecifies the upstream SRA Down Shift Margin in units of 0.25 dB, for a range of 0 to 31.75 dB. in unit of 1 db.
1.3.6.1.4.1.6321.1.2.3.4.9.1.1.1.7ColumnxturConfUpshiftSnrMgnread-createcurrentSpecifies the upstream SRA UP Shift Margin in units of 0.25 dB, for a range of 0 to 31.75 dB. in unit of 1 db.
1.3.6.1.4.1.6321.1.2.3.4.9.1.1.1.8ColumnxturConfDownshiftTimeread-onlycurrentSpecifies the upstream SRA Down Shift time in units of 1 sec , for a range of 0 to 16383 sec. in unit of 1 sec.
1.3.6.1.4.1.6321.1.2.3.4.9.1.1.1.9ColumnxturConfUpshiftTimeread-onlycurrentSpecifies the upstream SRA UP Shift time in units of 1 sec , for a range of 0 to 16383 sec. in unit of 1 sec.
1.3.6.1.4.1.6321.1.2.3.4.9.1.1.1.10ColumnsraShiftMarginProfileStatusread-createcurrentThis object is used to create a new row or modify or delete an existing row in this table.
1.3.6.1.4.1.6321.1.2.3.4.9.7NodevoipProfile
1.3.6.1.4.1.6321.1.2.3.4.9.7.1NodesipProfile
1.3.6.1.4.1.6321.1.2.3.4.9.7.1.1ScalarmaxNumOfSipProfilesread-onlycurrentThe maximum number of SIP profiles supported by the system.
1.3.6.1.4.1.6321.1.2.3.4.9.7.1.2TablesipProfileTablenot-accessiblecurrentThis table includes SIP protocol related configuration.
1.3.6.1.4.1.6321.1.2.3.4.9.7.1.2.1RowsipProfileEntrynot-accessiblecurrentAn entry in sipProfileTable.
1.3.6.1.4.1.6321.1.2.3.4.9.7.1.2.1.1ColumnsipProfileNameread-onlycurrentThis object is used by the SIP profile table in order to identify a row of this table.
1.3.6.1.4.1.6321.1.2.3.4.9.7.1.2.1.2ColumnsipProfileSipSvrread-createcurrentIP used for SIP registration or SIP domain name.
1.3.6.1.4.1.6321.1.2.3.4.9.7.1.2.1.3ColumnsipProfileRegSvrread-createcurrentRegistration server IP or registration server domain name.
1.3.6.1.4.1.6321.1.2.3.4.9.7.1.2.1.4ColumnsipProfileProxySvrread-createcurrentProxy server IP or proxy server doamin name.
1.3.6.1.4.1.6321.1.2.3.4.9.7.1.2.1.5ColumnsipProfileSipPortread-createcurrentSIP UA port number.
1.3.6.1.4.1.6321.1.2.3.4.9.7.1.2.1.6ColumnsipProfileRegSvrPortread-createcurrentRegistration server port number.
1.3.6.1.4.1.6321.1.2.3.4.9.7.1.2.1.7ColumnsipProfileProxySvrPortread-createcurrentProxy server port number.
1.3.6.1.4.1.6321.1.2.3.4.9.7.1.2.1.8ColumnsipProfileUriTyperead-createcurrent
1.3.6.1.4.1.6321.1.2.3.4.9.7.1.2.1.9ColumnsipProfilePbitread-createcurrent802.1p bit for SIP and RTP packet.
1.3.6.1.4.1.6321.1.2.3.4.9.7.1.2.1.10ColumnsipProfileDscpread-createcurrentDSCP for SIP and RTP packet.
1.3.6.1.4.1.6321.1.2.3.4.9.7.1.2.1.11ColumnsipProfileKeepAliveread-createcurrent
1.3.6.1.4.1.6321.1.2.3.4.9.7.1.2.1.12ColumnsipProfileSeread-createcurrentSession expiration time in seconds.
1.3.6.1.4.1.6321.1.2.3.4.9.7.1.2.1.13ColumnsipProfilePrackread-createcurrent
1.3.6.1.4.1.6321.1.2.3.4.9.7.1.2.1.14ColumnsipProfileRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in the table.
1.3.6.1.4.1.6321.1.2.3.4.9.7.1.2.1.15ColumnsipProfileRegExpireread-createcurrentRegistration expiration time in seconds.
1.3.6.1.4.1.6321.1.2.3.4.9.7.1.3ScalarmaxNumOfSipCallSvcProfilesread-onlycurrentThe maximum number of SIP call service profiles supported by the system.
1.3.6.1.4.1.6321.1.2.3.4.9.7.1.4TablesipCallSvcProfileTablenot-accessiblecurrentThis table includes SIP call service related configuration.
1.3.6.1.4.1.6321.1.2.3.4.9.7.1.4.1RowsipCallSvcProfileEntrynot-accessiblecurrentAn entry in sipCallSvcProfileTable.
1.3.6.1.4.1.6321.1.2.3.4.9.7.1.4.1.1ColumnsipCallSvcProfileNameread-onlycurrentThis object is used by the SIP call service profile table in order to identify a row of this table.
1.3.6.1.4.1.6321.1.2.3.4.9.7.1.4.1.2ColumnsipCallSvcProfilePasswdOnread-createcurrentPassword is necessary or not for SIP registration.
1.3.6.1.4.1.6321.1.2.3.4.9.7.1.4.1.3ColumnsipCallSvcProfilePasswdread-createcurrentSIP registration password.
1.3.6.1.4.1.6321.1.2.3.4.9.7.1.4.1.4ColumnsipCallSvcProfileNumberPlanOnread-createcurrent
1.3.6.1.4.1.6321.1.2.3.4.9.7.1.4.1.5ColumnsipCallSvcProfileNumberPlanCcread-createcurrentCountry code, only digit 0..9 are allowed.
1.3.6.1.4.1.6321.1.2.3.4.9.7.1.4.1.6ColumnsipCallSvcProfileNumberPlanNdcread-createcurrentNational destination code, only digit 0..9 are allowed.
1.3.6.1.4.1.6321.1.2.3.4.9.7.1.4.1.7ColumnsipCallSvcProfileNumberPlanTableread-createcurrentNumbering plan table name.
1.3.6.1.4.1.6321.1.2.3.4.9.7.1.4.1.8ColumnsipCallSvcProfileStateMaskread-createcurrentBit 1 callforward : call forward(Not supported) Bit 2 callhold : call hold Bit 3 callwait : call waiting Bit 4 callreturn : call return(Not supported) Bit 5 ca…
1.3.6.1.4.1.6321.1.2.3.4.9.7.1.4.1.9ColumnsipCallSvcProfileDtmfread-createcurrentdtmf bypass : bypass DTMF tone dtmf rfc2833 : DTMF tone relay according to RFC2833 dtmf rfc2833like : DTMF tone relay by SIP INFO message, but RFC2833 payload …
1.3.6.1.4.1.6321.1.2.3.4.9.7.1.4.1.10ColumnsipCallSvcProfileFaxread-createcurrentfax g711 : FAX service pass through by ITU-T G.711 fax t38 : FAX service by ITU-T T.38
1.3.6.1.4.1.6321.1.2.3.4.9.7.1.4.1.11ColumnsipCallSvcProfileRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in the table.
1.3.6.1.4.1.6321.1.2.3.4.9.7.1.4.1.12ColumnsipCallSvcProfileFlashTyperead-createcurrentflash invite : will send SIP INVITE message while press flash button. flash bypass : flash event will be handled by current switch type specified in sipCallSvc…
1.3.6.1.4.1.6321.1.2.3.4.9.7.1.4.1.13ColumnsipCallSvcProfileFlashInforead-createcurrentStrings carried in SIP INFO when specified in sipCallSvcProfileFlashType is sipinfo-5 and sipinfo-6.
1.3.6.1.4.1.6321.1.2.3.4.9.7.1.4.1.14ColumnsipCallSvcProfileSoftSwitchTyperead-createcurrentSoftswitch type is configured to specify softswitch-dependent behavior, currently only flash event is softswitch-dependent and should follow the softswitch typ…
1.3.6.1.4.1.6321.1.2.3.4.9.7.1.4.1.15ColumnsipCallSvcProfileCPCOnread-createcurrentPerform calling party control, or turn off.
1.3.6.1.4.1.6321.1.2.3.4.9.7.1.4.1.16ColumnsipCallSvcProfileCPCTimeoutread-createcurrentDelay hang up time of called party in seconds.
1.3.6.1.4.1.6321.1.2.3.4.9.7.2ScalarmaxNumOfDspProfilesread-onlycurrentThe maximum number of DSP profiles supported by the system.
1.3.6.1.4.1.6321.1.2.3.4.9.7.3TabledspProfileTablenot-accessiblecurrentThis table includes DSP related configuration.
1.3.6.1.4.1.6321.1.2.3.4.9.7.3.1RowdspProfileEntrynot-accessiblecurrentAn entry in dspProfileTable.
1.3.6.1.4.1.6321.1.2.3.4.9.7.3.1.1ColumndspProfileNameread-onlycurrentThis object is used by the DSP profile table in order to identify a row of this table.
1.3.6.1.4.1.6321.1.2.3.4.9.7.3.1.2ColumndspProfileCodecread-createcurrent0x01: g711a 0x02: g711mu 0x03: g723 0x04: g726-16 0x05: g726-24 0x06: g726-32 0x07: g726-40 0x08: g729ab the value of dspProfileCodec is OCTET STRING, there ar…
1.3.6.1.4.1.6321.1.2.3.4.9.7.3.1.3ColumndspProfilePlayBufferMinDelayread-createcurrentPlay buffer minimum delay in milliseconds. It should be less than or equal to dspProfilePlayBufferMaxDelay.
1.3.6.1.4.1.6321.1.2.3.4.9.7.3.1.4ColumndspProfilePlayBufferMaxDelayread-createcurrentPlay buffer maximum delay in milliseconds. It should be greater than or equal to dspProfilePlayBufferMinDelay.
1.3.6.1.4.1.6321.1.2.3.4.9.7.3.1.5ColumndspProfileEchoTailread-createcurrentEcho cancellation echo tail period in milliseconds.
1.3.6.1.4.1.6321.1.2.3.4.9.7.3.1.6ColumndspProfileRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in the table.
1.3.6.1.4.1.6321.1.2.3.4.9.7.3.1.7ColumndspProfileG711Vpiread-createcurrentVoice Packetization Interval(VPI) of codec G.711 in milliseconds. The values are 10, 20, 30, 40
1.3.6.1.4.1.6321.1.2.3.4.9.7.3.1.8ColumndspProfileG723Vpiread-createcurrentVoice Packetization Interval(VPI) of G.723 codec in milliseconds. The values are 30,60
1.3.6.1.4.1.6321.1.2.3.4.9.7.3.1.9ColumndspProfileG726Vpiread-createcurrentVoice Packetization Interval(VPI) of G.726 codec in milliseconds. The values are 10, 20, 30, 40
1.3.6.1.4.1.6321.1.2.3.4.9.7.3.1.10ColumndspProfileG729Vpiread-createcurrentVoice Packetization Interval(VPI) of G.729 codec in milliseconds. The values are 10, 20, 30, 40, 50, 60
1.3.6.1.4.1.6321.1.2.3.4.9.7.4Nodeh248Profile
1.3.6.1.4.1.6321.1.2.3.4.9.7.4.1ScalarmaxNumOfH248Profilesread-onlycurrentThe maximum number of H248 profiles supported by the system.
1.3.6.1.4.1.6321.1.2.3.4.9.7.4.2Tableh248ProfileTablenot-accessiblecurrentThis table includes H248 profile related configuration.
1.3.6.1.4.1.6321.1.2.3.4.9.7.4.2.1Rowh248ProfileEntrynot-accessiblecurrentAn entry in h248ProfileTable.
1.3.6.1.4.1.6321.1.2.3.4.9.7.4.2.1.1Columnh248ProfileNameread-onlycurrentThis object is used by the H248 profile table in order to identify a row of this table.
1.3.6.1.4.1.6321.1.2.3.4.9.7.4.2.1.2Columnh248ProfileMgcSvrread-createcurrentMGC IP or MGC doamin name.
1.3.6.1.4.1.6321.1.2.3.4.9.7.4.2.1.3Columnh248ProfileMgcPortread-createcurrentMGC port number.
1.3.6.1.4.1.6321.1.2.3.4.9.7.4.2.1.4Columnh248ProfileMgc2Onread-createcurrentSecondary MGC on/off.
1.3.6.1.4.1.6321.1.2.3.4.9.7.4.2.1.5Columnh248ProfileMgc2Svrread-createcurrentSecondary MGC IP or MGC doamin name. h248ProfileMgc2On needs to turn on if user want to set Secondary MGC IP or domain name.
1.3.6.1.4.1.6321.1.2.3.4.9.7.4.2.1.6Columnh248ProfileMgc2Portread-createcurrentSecondary MGC port number. h248ProfileMgc2On needs to turn on if user want to set Secondary MGC port number.
1.3.6.1.4.1.6321.1.2.3.4.9.7.4.2.1.7Columnh248ProfileTransportread-createcurrentTransport procotol used by the H.248 protocol stack.
1.3.6.1.4.1.6321.1.2.3.4.9.7.4.2.1.8Columnh248ProfileEncoderead-createcurrentEncoding type used by the H.248 protocol stack
1.3.6.1.4.1.6321.1.2.3.4.9.7.4.2.1.9Columnh248ProfilePbitread-createcurrent802.1p bit for H.248 packet.
1.3.6.1.4.1.6321.1.2.3.4.9.7.4.2.1.10Columnh248ProfileDscpread-createcurrentDSCP for H.248 packet.
1.3.6.1.4.1.6321.1.2.3.4.9.7.4.2.1.11Columnh248ProfileRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in the table.
1.3.6.1.4.1.6321.1.2.3.4.9.7.4.2.1.12Columnh248ProfileVbdread-createcurrentVBD mode support on/off
1.3.6.1.4.1.6321.1.2.3.4.9.7.4.2.1.14Columnh248ProfileEphemeralPrefixread-createcurrentEphemeral Termination Prefix
1.3.6.1.4.1.6321.1.2.3.4.9.7.4.2.1.15Columnh248ProfileSoftswitchread-createcurrentSoftswitch type
1.3.6.1.4.1.6321.1.2.3.4.9.7.4.2.1.16Columnh248ProfileForceVerread-createcurrentForce using H.248 version 1
1.3.6.1.4.1.6321.1.2.3.4.9.7.4.2.1.17Columnh248ProfileStartRTPPortread-createcurrentStart of RTP port number.
1.3.6.1.4.1.6321.1.2.3.4.9.7.4.2.1.18Columnh248ProfileEndRTPPortread-createcurrentEnd of RTP port number.
1.3.6.1.4.1.6321.1.2.3.4.9.7.4.2.1.19Columnh248ProfileEphemeralStartNumberread-createcurrentEphemeral termination suffix start number, up to 15 digits.
1.3.6.1.4.1.6321.1.2.3.4.9.7.4.2.1.20Columnh248ProfileEphemeralSuffixLengthread-createcurrentEphemeral termination suffix number length , padding zero at the front if not long enough.
1.3.6.1.4.1.6321.1.2.3.4.9.7.4.2.1.21Columnh248ProfilePhysicalPrefixread-createcurrentPhysical Termination Prefix.
1.3.6.1.4.1.6321.1.2.3.4.9.7.4.2.1.22Columnh248ProfilePhysicalStartNumberread-createcurrentPhysical termination suffix start number, up to 15 digits.
1.3.6.1.4.1.6321.1.2.3.4.9.7.4.2.1.23Columnh248ProfilePhysicalSuffixLengthread-createcurrentPhysical termination suffix number length , padding zero at the front if not long enough.
1.3.6.1.4.1.6321.1.2.3.4.9.7.4.2.1.24Columnh248ProfileRfc2833Moderead-createcurrentRFC2833 mode support.
1.3.6.1.4.1.6321.1.2.3.4.9.7.4.2.1.25Columnh248ProfileRfc2833ModePayloadTyperead-createcurrentPayload type of RFC2833 mode.
1.3.6.1.4.1.6321.1.2.3.4.9.8NodeipqosProfile
1.3.6.1.4.1.6321.1.2.3.4.9.8.1ScalarmaxNumOfIpqosProfilesread-onlycurrentThe maximum number of IPQOS profiles supported by the system.
1.3.6.1.4.1.6321.1.2.3.4.9.8.2TableipqosProfileTablenot-accessiblecurrentThis table includes IPQOS related configuration.
1.3.6.1.4.1.6321.1.2.3.4.9.8.2.1RowipqosProfileEntrynot-accessiblecurrentAn entry in ipqosProfileTable.
1.3.6.1.4.1.6321.1.2.3.4.9.8.2.1.1ColumnipqosProfileNameread-onlycurrentThis object is used by the IPQOS profile table in order to identify a row of this table.
1.3.6.1.4.1.6321.1.2.3.4.9.8.2.1.2ColumnipqosProfileNumOfQueueread-createcurrentThe number of IPQOS queues.
1.3.6.1.4.1.6321.1.2.3.4.9.8.2.1.3ColumnipqosProfileRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in the table.
1.3.6.1.4.1.6321.1.2.3.4.9.8.3TableipqosProfileQueueTablenot-accessiblecurrentThis table includes IPQOS queue related configuration.
1.3.6.1.4.1.6321.1.2.3.4.9.8.3.1RowipqosProfileQueueEntrynot-accessiblecurrentAn entry in ipqosProfileQueueTable.
1.3.6.1.4.1.6321.1.2.3.4.9.8.3.1.1ColumnipqosProfileQueueIndexread-onlycurrentIPQOS queue index.
1.3.6.1.4.1.6321.1.2.3.4.9.8.3.1.2ColumnipqosProfileQueuePIRread-writecurrentPeak rate.(multiple of 256)
1.3.6.1.4.1.6321.1.2.3.4.9.8.3.1.3ColumnipqosProfileQueueCIRread-writecurrentCommited rate.(multiple of 256)
1.3.6.1.4.1.6321.1.2.3.4.9.8.3.1.4ColumnipqosProfileQueuePBSread-writecurrentPeak burst size.(mutiple of 256)
1.3.6.1.4.1.6321.1.2.3.4.9.8.3.1.5ColumnipqosProfileQueueCBSread-writecurrentCommited burst size.(mutiple of 256)
1.3.6.1.4.1.6321.1.2.3.4.9.8.3.1.6ColumnipqosProfileQueueLevelread-writecurrentQueue level.
1.3.6.1.4.1.6321.1.2.3.4.9.8.3.1.7ColumnipqosProfileQueueWeightread-writecurrentQueue weight.
1.3.6.1.4.1.6321.1.2.3.4.10Nodeswitch
1.3.6.1.4.1.6321.1.2.3.4.10.6Nodedot3ad
1.3.6.1.4.1.6321.1.2.3.4.10.6.1Tabledot3adTablenot-accessiblecurrentThe table contains 802.3ad configuration.
1.3.6.1.4.1.6321.1.2.3.4.10.6.1.1Rowdot3adEntrynot-accessiblecurrent
1.3.6.1.4.1.6321.1.2.3.4.10.6.1.1.1Columndot3adGroupIdread-onlycurrentGroup ID 1 for the subtending group and 2 for the uplink group.
1.3.6.1.4.1.6321.1.2.3.4.10.6.1.1.2Columndot3adEnableread-writecurrentEnable/disable 802.3ad function.
1.3.6.1.4.1.6321.1.2.3.4.10.6.2ScalarlacpPriorityread-writecurrentLACP system priority.
1.3.6.1.4.1.6321.1.2.3.4.10.6.3ScalarlacpTimeoutread-writecurrentThe time interval to exchange LACP packets in order to check that the peer port in the trunk group is still up.
1.3.6.1.4.1.6321.1.2.3.4.10.6.4TableportTrunkingTablenot-accessiblecurrentThe table contains current status of port trunking.
1.3.6.1.4.1.6321.1.2.3.4.10.6.4.1RowportTrunkingEntrynot-accessiblecurrent
1.3.6.1.4.1.6321.1.2.3.4.10.6.4.1.1ColumnportTrunkingGroupIdread-onlycurrentGroup ID 1 for the subtending group and 2 for the uplink group.
1.3.6.1.4.1.6321.1.2.3.4.10.6.4.1.2ColumnportTrunkingStatusread-onlycurrentPort trunking status.
1.3.6.1.4.1.6321.1.2.3.4.10.6.4.1.3ColumnportTrunkingPortListread-onlycurrentThe port list which actually joins the trunking group.
1.3.6.1.4.1.6321.1.2.3.4.10.10Nodedscp
1.3.6.1.4.1.6321.1.2.3.4.10.10.1TabledscpMappingTablenot-accessiblecurrentThe table contains DSCP mapping configuration for the adsl ports.
1.3.6.1.4.1.6321.1.2.3.4.10.10.1.1RowdscpMappingEntrynot-accessiblecurrentAn entry of dscpMappingTable.
1.3.6.1.4.1.6321.1.2.3.4.10.10.1.1.1ColumndscpSrcCodePointread-onlycurrentThe DSCP source code point used for mapping.
1.3.6.1.4.1.6321.1.2.3.4.10.10.1.1.3ColumndscpMapPriorityread-writecurrentThe mapping p bits that will replace the source p bits in the incoming packet.
1.3.6.1.4.1.6321.1.2.3.4.10.10.2TabledscpPortTablenot-accessiblecurrentThe table contains DSCP mapping configuration for the adsl ports.
1.3.6.1.4.1.6321.1.2.3.4.10.10.2.1RowdscpPortEntrynot-accessiblecurrentAn entry of dscpPortTable.
1.3.6.1.4.1.6321.1.2.3.4.10.10.2.1.1ColumndscpStatusEnableread-writecurrentThe DSCP port status.
1.3.6.1.4.1.6321.1.2.3.4.10.12NodevlanIsolation
1.3.6.1.4.1.6321.1.2.3.4.10.12.1TablevlanIsolationTablenot-accessiblecurrentA table contains configuration of isolated VLAN.
1.3.6.1.4.1.6321.1.2.3.4.10.12.1.1RowvlanIsolationEntrynot-accessiblecurrentAn entry of vlanIsolationTable.
1.3.6.1.4.1.6321.1.2.3.4.10.12.1.1.1ColumnvlanIsolationRowStatusread-createcurrentRow status of the table used to create/delete an entry.
1.3.6.1.4.1.6321.1.2.3.4.10.13NodeenetMtu
1.3.6.1.4.1.6321.1.2.3.4.10.13.1ScalarenetMtuEntryread-writecurrentSets the MTU size for layer 2 frame, size from 1526 to 1532, default value is 1526.
1.3.6.1.4.1.6321.1.2.3.4.10.14Nodetpid
1.3.6.1.4.1.6321.1.2.3.4.10.14.1ScalartpidEntryread-writecurrentSets TPID(Tag Protocol Identifier) of tagged frame, 0~FFFF.
1.3.6.1.4.1.6321.1.2.3.4.10.15Nodecfm
1.3.6.1.4.1.6321.1.2.3.4.10.15.1TablecfmLoopbackPortTablenot-accessiblecurrentA table that contains CFM information.
1.3.6.1.4.1.6321.1.2.3.4.10.15.1.1RowcfmLoopbackPortEntrynot-accessiblecurrentAn entry in cfmLoopbackPortTable.
1.3.6.1.4.1.6321.1.2.3.4.10.15.1.1.1ColumncfmLoopbackPortStateread-writecurrentCFM loopback enable/disable on the port.
1.3.6.1.4.1.6321.1.2.3.4.10.15.2TablecfmMIPTablenot-accessiblecurrent
1.3.6.1.4.1.6321.1.2.3.4.10.15.2.1RowcfmMIPEntrynot-accessiblecurrentAn entry in cfmMIPTable.
1.3.6.1.4.1.6321.1.2.3.4.10.15.2.1.3ColumncfmPortnot-accessiblecurrent
1.3.6.1.4.1.6321.1.2.3.4.10.15.2.1.4ColumncfmMIPRowStatusread-createcurrent
1.3.6.1.4.1.6321.1.2.3.4.10.15.2.1.5ColumncfmMIPMacAddrread-writecurrentCFM MIP mac address
1.3.6.1.4.1.6321.1.2.3.4.10.15.3ScalarcfmActionEnableStatusread-writecurrentCFM Action enable status for the CO device
1.3.6.1.4.1.6321.1.2.3.4.10.15.4ScalarcfmModeread-writecurrentCFM follow standard mode
1.3.6.1.4.1.6321.1.2.3.4.10.15.5ScalarcfmLbmTimeoutread-writecurrentCFM LBM timeout, 100-86400 ms
1.3.6.1.4.1.6321.1.2.3.4.10.15.6ScalarcfmLbmDataTlvLengthread-writecurrentCFM LBM data tlv length, 0-1400 bytes
1.3.6.1.4.1.6321.1.2.3.4.10.15.7TablecfmLbrTablenot-accessiblecurrentA table that contains CFM LBR results.
1.3.6.1.4.1.6321.1.2.3.4.10.15.7.1RowcfmLbrEntrynot-accessiblecurrentAn entry in cfmLbrTable.
1.3.6.1.4.1.6321.1.2.3.4.10.15.7.1.1ColumncfmLbmIndexread-onlycurrentCFM lbm index.
1.3.6.1.4.1.6321.1.2.3.4.10.15.7.1.2ColumncfmLbrIndexread-onlycurrentCFM lbr index.
1.3.6.1.4.1.6321.1.2.3.4.10.15.7.1.3ColumncfmLbrSrcMacread-onlycurrentCFM lbr source address.
1.3.6.1.4.1.6321.1.2.3.4.10.15.7.1.4ColumncfmLbrStatusread-onlycurrentCFM lbr status.
1.3.6.1.4.1.6321.1.2.3.4.10.15.7.1.5ColumncfmLbrRttread-onlycurrentCFM lbr rtt in ms.
1.3.6.1.4.1.6321.1.2.3.4.10.51Nodedhcp
1.3.6.1.4.1.6321.1.2.3.4.10.51.2TabledhcpRelay82Tablenot-accessiblecurrentA table that contains DHCP Relay configuration.
1.3.6.1.4.1.6321.1.2.3.4.10.51.2.1RowdhcpRelay82Entrynot-accessiblecurrentThe entry of DHCP Relay table.
1.3.6.1.4.1.6321.1.2.3.4.10.51.2.1.1ColumndhcpRelay82PrimaryServerread-writecurrentThe IP address of the DHCP Relay primary server.
1.3.6.1.4.1.6321.1.2.3.4.10.51.2.1.2ColumndhcpRelay82SecondaryServerread-writecurrentThe IP address of the DHCP Relay secondary server.
1.3.6.1.4.1.6321.1.2.3.4.10.51.2.1.3ColumndhcpRelay82ActiveServerread-onlycurrentThe current active DHCP Relay server.
1.3.6.1.4.1.6321.1.2.3.4.10.51.2.1.4ColumndhcpRelay82Enableread-createcurrentEnable/disable DHCP relay and Option82 function.
1.3.6.1.4.1.6321.1.2.3.4.10.51.2.1.5ColumndhcpRelay82Inforead-createcurrentUser specific Option82 information.
1.3.6.1.4.1.6321.1.2.3.4.10.51.2.1.6ColumndhcpRelay82RelayModeread-createcurrentDHCP relay mode.
1.3.6.1.4.1.6321.1.2.3.4.10.51.2.1.8ColumndhcpRelay82Suboption2Enableread-createcurrentEnable/disable Option 82 sub-option 2.
1.3.6.1.4.1.6321.1.2.3.4.10.51.2.1.9ColumndhcpRelay82Suboption2Inforead-createcurrentUser specified information for Option 82 sub-option 2.
1.3.6.1.4.1.6321.1.2.3.4.10.51.2.1.10ColumndhcpRelay82EntryEnableread-createcurrentEnable/disable DHCP Relay
1.3.6.1.4.1.6321.1.2.3.4.10.51.2.1.11ColumndhcpRelay82EntryOptionModeread-createcurrentOption82 format.
1.3.6.1.4.1.6321.1.2.3.4.10.51.2.1.12ColumndhcpRelay82VlanIpread-writecurrentThe IP address of the DHCP Relay interface for this VLAN.
1.3.6.1.4.1.6321.1.2.3.4.10.51.2.1.13ColumndhcpRelay82VlanMaskread-writecurrentThe network mask of the DHCP Relay interface for this VLAN.
1.3.6.1.4.1.6321.1.2.3.4.10.51.2.1.14ColumndhcpRelay82VlanGatewayread-writecurrentThe gateway of the DHCP Relay interface for this VLAN.
1.3.6.1.4.1.6321.1.2.3.4.10.51.2.1.15ColumndhcpRelay82ThirdServerread-writecurrentThe IP address of the DHCP Relay third server.
1.3.6.1.4.1.6321.1.2.3.4.10.51.2.1.16ColumndhcpRelay82FourthServerread-writecurrentThe IP address of the DHCP Relay fourth server.
1.3.6.1.4.1.6321.1.2.3.4.10.51.2.1.17ColumndhcpRelay82FifthServerread-writecurrentThe IP address of the DHCP Relay fifth server.
1.3.6.1.4.1.6321.1.2.3.4.10.51.2.1.18ColumndhcpRelay82ServerVidread-writecurrentThe VID of the DHCP Relay server for this VLAN.
1.3.6.1.4.1.6321.1.2.3.4.10.51.8NodedhcpRelayTest
1.3.6.1.4.1.6321.1.2.3.4.10.51.8.1ScalardhcpRelayTestVidread-writecurrentSetting the VID of the test server.
1.3.6.1.4.1.6321.1.2.3.4.10.51.8.2ScalardhcpRelayTestIpread-writecurrentSetting the IP of the test server.
1.3.6.1.4.1.6321.1.2.3.4.10.51.8.3ScalardhcpRelayTestOpsread-writecurrentSet the object to 1 to test DHCP server.
1.3.6.1.4.1.6321.1.2.3.4.10.51.8.4ScalardhcpRelayTestStatusread-onlycurrentDisplay testing server status.
1.3.6.1.4.1.6321.1.2.3.4.10.51.9NodedhcpRelayArp
1.3.6.1.4.1.6321.1.2.3.4.10.51.9.1TabledhcpRelayArpShowTablenot-accessiblecurrentThe table displays DHCP ARP.
1.3.6.1.4.1.6321.1.2.3.4.10.51.9.1.1RowdhcpRelayArpShowEntrynot-accessiblecurrentAn entry of dhcpRelayArpShowTable.
1.3.6.1.4.1.6321.1.2.3.4.10.51.9.1.1.1ColumndhcpRelayArpShowVidread-onlycurrentDisplay the VID of the DHCP ARP entry.
1.3.6.1.4.1.6321.1.2.3.4.10.51.9.1.1.2ColumndhcpRelayArpShowIpread-onlycurrentDisplay the IP of the DHCP ARP entry.
1.3.6.1.4.1.6321.1.2.3.4.10.51.9.1.1.3ColumndhcpRelayArpShowMacread-onlycurrentDisplay the MAC of the DHCP ARP entry.
1.3.6.1.4.1.6321.1.2.3.4.10.51.9.2ScalardhcpRelayArpFlushOpsread-writecurrentSet the object to 1 to start flushing.
1.3.6.1.4.1.6321.1.2.3.4.10.53Nodemacfilter
1.3.6.1.4.1.6321.1.2.3.4.10.53.1TablemacFilterPortTablenot-accessiblecurrentThis table includes the status of mac filtering for each port.
1.3.6.1.4.1.6321.1.2.3.4.10.53.1.1RowmacFilterPortEntrynot-accessiblecurrentAn entry in macFilterPortTable.
1.3.6.1.4.1.6321.1.2.3.4.10.53.1.1.1ColumnmacFilterPortEnableread-writecurrentEnable/disable MAC filtering for the port.
1.3.6.1.4.1.6321.1.2.3.4.10.53.1.1.2ColumnmacFilterPortMacCountread-writecurrentThe total number of MAC addresses allowed for the port.
1.3.6.1.4.1.6321.1.2.3.4.10.53.1.1.3ColumnmacFilterPortFilterModeread-writecurrentThe mac filter mode (accept or deny) for the port.
1.3.6.1.4.1.6321.1.2.3.4.10.53.2ScalarmaxNumOfMacFiltersInSystemread-onlycurrentThe max number of mac filters supported in the system.
1.3.6.1.4.1.6321.1.2.3.4.10.53.3ScalarmaxNumOfMacFiltersPerPortread-onlycurrentThe max number of mac filters supported per port.
1.3.6.1.4.1.6321.1.2.3.4.10.53.4ScalarcurrNumOfMacFiltersInSystemread-onlycurrentThe current number of mac filters in the system.
1.3.6.1.4.1.6321.1.2.3.4.10.53.5TablemacFilterTablenot-accessiblecurrentA table that contains the mac filter addresses.
1.3.6.1.4.1.6321.1.2.3.4.10.53.5.1RowmacFilterEntrynot-accessiblecurrentThe entry of macFilterTable.
1.3.6.1.4.1.6321.1.2.3.4.10.53.5.1.1ColumnmacFilterAddrread-onlycurrentThe mac address which can pass through or be rejected from the port.
1.3.6.1.4.1.6321.1.2.3.4.10.53.5.1.2ColumnmacFilterRowStatusread-createcurrentThe row status of the entry.
1.3.6.1.4.1.6321.1.2.3.4.10.53.6NodemacfilterBatchSet
1.3.6.1.4.1.6321.1.2.3.4.10.53.6.1ScalarmacfilterTargetread-writecurrentThis managed object is used for identify the target on which the port configuration should be performed. The target is encoded as: Byte 1: 0, Reserved(chassis)…
1.3.6.1.4.1.6321.1.2.3.4.10.53.6.2ScalarmacfilterOpsread-writecurrentThe corresponding bit is set to 1 to start the operation. The various bit positions are: BIT 1: enable mac filter BIT 2: enable mac count filter BIT 3: disable…
1.3.6.1.4.1.6321.1.2.3.4.10.53.6.3ScalarmacFilterMacCountForBatchSetread-writecurrentThe total number of MAC addresses allowed for a port.
1.3.6.1.4.1.6321.1.2.3.4.10.53.7TableouiFilterTablenot-accessiblecurrentA table that contains the OUI filter addresses.
1.3.6.1.4.1.6321.1.2.3.4.10.53.7.1RowouiFilterEntrynot-accessiblecurrentThe entry of ouiFilterTable.
1.3.6.1.4.1.6321.1.2.3.4.10.53.7.1.1ColumnouiFilterAddrread-onlycurrentThe first three bytes of the mac address which can pass through or be rejected from the port.
1.3.6.1.4.1.6321.1.2.3.4.10.53.7.1.2ColumnouiFilterRowStatusread-createcurrentThe row status of the entry.
1.3.6.1.4.1.6321.1.2.3.4.10.53.8ScalarmaxNumOfOuiFiltersPerPortread-onlycurrentThe max number of OUI filters supported per port.
1.3.6.1.4.1.6321.1.2.3.4.10.53.9TableouiFilterPortTablenot-accessiblecurrentThis table includes the status of oui filtering for each port.
1.3.6.1.4.1.6321.1.2.3.4.10.53.9.1RowouiFilterPortEntrynot-accessiblecurrentAn entry in macFilterPortTable.
1.3.6.1.4.1.6321.1.2.3.4.10.53.9.1.1ColumnouiFilterPortEnableread-writecurrentEnable/disable oui filtering for the port.
1.3.6.1.4.1.6321.1.2.3.4.10.53.9.1.2ColumnouiFilterPortFilterModeread-writecurrentThe oui filter mode (accept or deny) for the port.
1.3.6.1.4.1.6321.1.2.3.4.10.55NodedhcpSnoop
1.3.6.1.4.1.6321.1.2.3.4.10.55.1TabledhcpSnoopPortTablenot-accessiblecurrentThis table includes DHCP snooping enable/disable for each port.
1.3.6.1.4.1.6321.1.2.3.4.10.55.1.1RowdhcpSnoopPortEntrynot-accessiblecurrentAn entry of dhcpSnoopPortTable.
1.3.6.1.4.1.6321.1.2.3.4.10.55.1.1.1ColumndhcpSnoopEnableread-writecurrentEnable/disable DHCP snooping for a port.
1.3.6.1.4.1.6321.1.2.3.4.10.55.1.1.2ColumndhcpSnoopMaxcntread-writecurrentSet the max entries of the DHCP ARP table.
1.3.6.1.4.1.6321.1.2.3.4.10.55.1.1.3ColumndhcpSnoopSmacverifyEnableread-writecurrentEnable/disable DHCP source MAC verify for a port.
1.3.6.1.4.1.6321.1.2.3.4.10.55.2ScalardhcpSnoopTargetread-writecurrentThis managed object is used for identify the target on which the operation should be performed. The target is encoded as: Byte 1: the octet specifies a set of …
1.3.6.1.4.1.6321.1.2.3.4.10.55.3ScalardhcpSnoopOpsread-writecurrentThe corresponding bit is set to 1 to start the operation. The various bit positions are: BIT 1: DHCP snooping table flush.
1.3.6.1.4.1.6321.1.2.3.4.10.55.4TabledhcpStaticTablenot-accessiblecurrentThis table defines DHCP static IP addresses.
1.3.6.1.4.1.6321.1.2.3.4.10.55.4.1RowdhcpStaticEntrynot-accessiblecurrentAn entry of dhcpStaticTable.
1.3.6.1.4.1.6321.1.2.3.4.10.55.4.1.1ColumndhcpStaticIpAddrread-onlycurrentThe IP address which can pass through the port.
1.3.6.1.4.1.6321.1.2.3.4.10.55.4.1.2ColumndhcpStaticRowStatusread-createcurrentRow status of the table entry.
1.3.6.1.4.1.6321.1.2.3.4.10.55.5ScalarmaxNumOfDhcpStaticIpread-onlycurrentThe maximum number of DHCP static IP addresses which can be created for a port.
1.3.6.1.4.1.6321.1.2.3.4.10.55.6ScalardhcpSnoopMaxcntModeread-writecurrentWhen DHCP snooping table is full, new DHCP lease will replace first one in option 0 or will be dropped in option 1.
1.3.6.1.4.1.6321.1.2.3.4.10.56Nodeacl
1.3.6.1.4.1.6321.1.2.3.4.10.56.1TableaclSetTablenot-accessiblecurrentaclsetTable.
1.3.6.1.4.1.6321.1.2.3.4.10.56.1.1RowaclSetEntrynot-accessiblecurrentAn entry of aclSetTable.
1.3.6.1.4.1.6321.1.2.3.4.10.56.1.1.1ColumnaclSetVpiread-onlycurrentVPI value
1.3.6.1.4.1.6321.1.2.3.4.10.56.1.1.2ColumnaclSetVciread-onlycurrentVCI value
1.3.6.1.4.1.6321.1.2.3.4.10.56.1.1.3ColumnaclSetProfileNameread-onlycurrentACL Profile name
1.3.6.1.4.1.6321.1.2.3.4.10.56.1.1.4ColumnaclSetRowStatusread-writecurrentRowStatus of aclSetEntry
1.3.6.1.4.1.6321.1.2.3.4.10.56.2TableaclProfileTablenot-accessiblecurrentaclProfileTable.
1.3.6.1.4.1.6321.1.2.3.4.10.56.2.1RowaclProfileEntrynot-accessiblecurrentAn entry of aclProfileTable.
1.3.6.1.4.1.6321.1.2.3.4.10.56.2.1.1ColumnaclProfileRuleNameread-onlycurrentProfile rule name
1.3.6.1.4.1.6321.1.2.3.4.10.56.2.1.2ColumnaclProfileRuleNumberread-writecurrentThe managed object is for acl profile rule configuration. etype <etype> vlan <vid> (1), etype <etype> smac <mac> (2), etype <etype> dmac <mac> (3), vlan <vid> …
1.3.6.1.4.1.6321.1.2.3.4.10.56.2.1.3ColumnaclProfileActionNumberread-writecurrentProfile action number. Bit 1: rate Bit 2: rvlan Bit 3: rpri Bit 4: deny Bit 1, Bit 2 & Bit 3 can multiple selection.
1.3.6.1.4.1.6321.1.2.3.4.10.56.2.1.4ColumnaclProfileRuleParamMaskread-writecurrentProfile rule parameter mask. BIT 1: srcip <ip>/<mask> BIT 2: dstip <ip>/<mask> BIT 3: tos <stos> <etos> BIT 4: srcport <sport> <eport> BIT 5: dstport <sport> <…
1.3.6.1.4.1.6321.1.2.3.4.10.56.2.1.5ColumnaclProfileRuleEtyperead-writecurrentProfile rule etype
1.3.6.1.4.1.6321.1.2.3.4.10.56.2.1.6ColumnaclProfileRuleVidread-writecurrentProfile rule vid
1.3.6.1.4.1.6321.1.2.3.4.10.56.2.1.7ColumnaclProfileRuleSmacread-writecurrentProfile rule source MAC
1.3.6.1.4.1.6321.1.2.3.4.10.56.2.1.8ColumnaclProfileRuleDmacread-writecurrentProfile rule destination MAC
1.3.6.1.4.1.6321.1.2.3.4.10.56.2.1.9ColumnaclProfileRulePriorityread-writecurrentProfile rule priority
1.3.6.1.4.1.6321.1.2.3.4.10.56.2.1.10ColumnaclProfileRuleProtocolread-writecurrentProfile rule protocol. icmp(1),igmp(2),ip(4),tcp(6), udp(17),gre(47),ospf(89), other ptype
1.3.6.1.4.1.6321.1.2.3.4.10.56.2.1.21ColumnaclProfileActionRateread-writecurrentProfile action to replace to this rate
1.3.6.1.4.1.6321.1.2.3.4.10.56.2.1.22ColumnaclProfileActionrvlanread-writecurrentProfile action to replace to this vlan
1.3.6.1.4.1.6321.1.2.3.4.10.56.2.1.23ColumnaclProfileActionrpriread-writecurrentProfile action to replace to this priority
1.3.6.1.4.1.6321.1.2.3.4.10.56.2.1.24ColumnaclProfileRowStatusread-writecurrentThe row status of the entry.
1.3.6.1.4.1.6321.1.2.3.4.10.56.2.1.25ColumnaclProfileRuleSipread-createcurrentSource IP.
1.3.6.1.4.1.6321.1.2.3.4.10.56.2.1.26ColumnaclProfileRuleDipread-createcurrentDestination IP.
1.3.6.1.4.1.6321.1.2.3.4.10.56.2.1.27ColumnaclProfileRuleSportread-createcurrentSource port.
1.3.6.1.4.1.6321.1.2.3.4.10.56.2.1.28ColumnaclProfileRuleDportread-createcurrentDestination port.
1.3.6.1.4.1.6321.1.2.3.4.10.57NodepppoeAgent
1.3.6.1.4.1.6321.1.2.3.4.10.57.1TablepppoeAgentTablenot-accessiblecurrentA table that contains PPPoE intermediate agent configuration.
1.3.6.1.4.1.6321.1.2.3.4.10.57.1.1RowpppoeAgentEntrynot-accessiblecurrentAn entry of pppoeAgentTable.
1.3.6.1.4.1.6321.1.2.3.4.10.57.1.1.1ColumnpppoeAgentEnableread-createcurrentEnable/disable PppoE intermediate agent function.
1.3.6.1.4.1.6321.1.2.3.4.10.57.1.1.2ColumnpppoeAgentInforead-createcurrentUser specific Option82 information.
1.3.6.1.4.1.6321.1.2.3.4.10.57.1.1.3ColumnpppoeAgentRowStatusread-createcurrentRow status of the table entry.
1.3.6.1.4.1.6321.1.2.3.4.10.57.1.1.4ColumnpppoeAgentOptionModeread-createcurrentOption82 format.
1.3.6.1.4.1.6321.1.2.3.4.10.57.2ScalarmaxNumOfPppoeAgentConfread-onlycurrentThe maximum number of rows that can be created in pppoeAgentTable.
1.3.6.1.4.1.6321.1.2.3.4.10.58Noden1mac
1.3.6.1.4.1.6321.1.2.3.4.10.58.1Scalarn1macReplaceMacread-onlycurrentThis MAC address will be used to replace client's MAC address.
1.3.6.1.4.1.6321.1.2.3.4.10.58.2Tablen1macPortTablenot-accessiblecurrentThe table contains N to 1 MAC configuration for DSL ports.
1.3.6.1.4.1.6321.1.2.3.4.10.58.2.1Rown1macPortEntrynot-accessiblecurrentAn entry of n1macPortTable.
1.3.6.1.4.1.6321.1.2.3.4.10.58.2.1.1Columnn1macStatusEnableread-writecurrentThe port status of n1mac function.
1.3.6.1.4.1.6321.1.2.3.4.10.60Nodemacff
1.3.6.1.4.1.6321.1.2.3.4.10.60.1TablemacFfTablenot-accessiblecurrentA table that contains MAC Force Forwarding configuration.
1.3.6.1.4.1.6321.1.2.3.4.10.60.1.1RowmacFfEntrynot-accessiblecurrentAn entry of macFfTable.
1.3.6.1.4.1.6321.1.2.3.4.10.60.1.1.1ColumnmacFfIndexread-onlycurrentIndex of the MACFF.
1.3.6.1.4.1.6321.1.2.3.4.10.60.1.1.2ColumnmacFfVidread-writecurrentThe VLAN-ID refering to this AR/AS.
1.3.6.1.4.1.6321.1.2.3.4.10.60.1.1.3ColumnmacFfArIPread-writecurrentIP of this AR/AS
1.3.6.1.4.1.6321.1.2.3.4.10.60.1.1.4ColumnmacFfSrcIPread-writecurrentThe source IP address of the MACFF.
1.3.6.1.4.1.6321.1.2.3.4.10.60.1.1.5ColumnmacFfSrcMaskread-writecurrentThe subnet mask of source IP mask.
1.3.6.1.4.1.6321.1.2.3.4.10.60.1.1.6ColumnmacFfRowStatusread-createcurrentThe row status of the MacFfEntry entry.
1.3.6.1.4.1.6321.1.2.3.4.10.60.3ScalarmacFfArpFlushread-writecurrentSet the object to 1 to flush mac table.
1.3.6.1.4.1.6321.1.2.3.4.10.60.4ScalarmaxNumOfMacFfVlanInSystemread-onlycurrentThe max number of macff Vlans supported in the system.
1.3.6.1.4.1.6321.1.2.3.4.10.60.5TablemacFfVlanTablenot-accessiblecurrentA table that contains MAC Force Forwarding Vlan configuration.
1.3.6.1.4.1.6321.1.2.3.4.10.60.5.1RowmacFfVlanEntrynot-accessiblecurrentAn entry of macFfVlanTable.
1.3.6.1.4.1.6321.1.2.3.4.10.60.5.1.1ColumnmacFfVlanRowstatusread-createcurrentRow status of the table used to create/delete an entry.
1.3.6.1.4.1.6321.1.2.3.4.10.60.6TablemacFfStaticIPTablenot-accessiblecurrent
1.3.6.1.4.1.6321.1.2.3.4.10.60.6.1RowmacFfStaticIPEntrynot-accessiblecurrentAn entry of macFfTable.
1.3.6.1.4.1.6321.1.2.3.4.10.60.6.1.1ColumnmacFfStaticIPPortread-onlycurrentThe port number, 1 ~ 48.
1.3.6.1.4.1.6321.1.2.3.4.10.60.6.1.2ColumnmacFfStaticIPVidread-onlycurrentVLAN ID of the IP range, 1 ~ 4094, the vid should be enable the MACFF function first.
1.3.6.1.4.1.6321.1.2.3.4.10.60.6.1.3ColumnmacFfstaticIPread-onlycurrentThe specified IP range.
1.3.6.1.4.1.6321.1.2.3.4.10.60.6.1.4ColumnmacFfStaticIPMaskread-onlycurrentMask_bits is 24 .. 32.
1.3.6.1.4.1.6321.1.2.3.4.10.60.6.1.5ColumnmacFfStaticIPRowStatusread-createcurrentThe row status used to configure the table entry.
1.3.6.1.4.1.6321.1.2.3.4.10.60.7TablemacFfServerMacTablenot-accessiblecurrent
1.3.6.1.4.1.6321.1.2.3.4.10.60.7.1RowmacFfServerMacEntrynot-accessiblecurrentAn entry of macFfTable.
1.3.6.1.4.1.6321.1.2.3.4.10.60.7.1.1ColumnmacFfServerMacVidread-onlycurrentVLAN ID of the IP range, 1 ~ 4094, the vid should be enable the MACFF function first.
1.3.6.1.4.1.6321.1.2.3.4.10.60.7.1.2ColumnmacFfServerMacAddrread-onlycurrentThe mac address.
1.3.6.1.4.1.6321.1.2.3.4.10.60.7.1.3ColumnmacFfServerMacRowStatusread-createcurrentThe row status used to configure the table entry.
1.3.6.1.4.1.6321.1.2.3.4.11Nodesys
1.3.6.1.4.1.6321.1.2.3.4.11.4NodetimeSetup
1.3.6.1.4.1.6321.1.2.3.4.11.4.7NodedayLightSaving
1.3.6.1.4.1.6321.1.2.3.4.11.4.7.1ScalardayLightSavingAdminStatusread-writecurrent
1.3.6.1.4.1.6321.1.2.3.4.11.4.7.2NodedayLightSavingStartTime
1.3.6.1.4.1.6321.1.2.3.4.11.4.7.2.1ScalardayLightSavingStartMonthread-writecurrent
1.3.6.1.4.1.6321.1.2.3.4.11.4.7.2.2ScalardayLightSavingStartWeekread-writecurrent
1.3.6.1.4.1.6321.1.2.3.4.11.4.7.2.3ScalardayLightSavingStartWdayread-writecurrent
1.3.6.1.4.1.6321.1.2.3.4.11.4.7.2.4ScalardayLightSavingStartHourread-writecurrent1: 01:00, 2: 02:00 3: 03:00 4: 04:00 5: 05:00 6: 06:00 7: 07:00 8: 08:00 9: 09:00 10: 10:00 11: 11:00 12: 12:00 13: 13:00 14: 14:00 15: 15:00 16: 16:00 17: 17:…
1.3.6.1.4.1.6321.1.2.3.4.11.4.7.3NodedayLightSavingEndTime
1.3.6.1.4.1.6321.1.2.3.4.11.4.7.3.1ScalardayLightSavingEndMonthread-writecurrent
1.3.6.1.4.1.6321.1.2.3.4.11.4.7.3.2ScalardayLightSavingEndWeekread-writecurrent
1.3.6.1.4.1.6321.1.2.3.4.11.4.7.3.3ScalardayLightSavingEndWdayread-writecurrent
1.3.6.1.4.1.6321.1.2.3.4.11.4.7.3.4ScalardayLightSavingEndHourread-writecurrent1: 01:00, 2: 02:00 3: 03:00 4: 04:00 5: 05:00 6: 06:00 7: 07:00 8: 08:00 9: 09:00 10: 10:00 11: 11:00 12: 12:00 13: 13:00 14: 14:00 15: 15:00 16: 16:00 17: 17:…
1.3.6.1.4.1.6321.1.2.3.4.11.5NodeaccessCtrl
1.3.6.1.4.1.6321.1.2.3.4.11.5.2TablesecuredClientTablenot-accessiblecurrentA table that contains information about secured clients.
1.3.6.1.4.1.6321.1.2.3.4.11.5.2.1RowsecuredClientEntrynot-accessiblecurrentA list of secured client entry.
1.3.6.1.4.1.6321.1.2.3.4.11.5.2.1.1ColumnsecuredClientIndexread-onlycurrentThe index of the entry.
1.3.6.1.4.1.6321.1.2.3.4.11.5.2.1.2ColumnsecuredClientStartIpread-writecurrentThe starting IP address of the secured client set.
1.3.6.1.4.1.6321.1.2.3.4.11.5.2.1.3ColumnsecuredClientEndIpread-writecurrentThe ending IP address of the secured client set.
1.3.6.1.4.1.6321.1.2.3.4.11.5.2.1.4ColumnsecuredClientServiceread-writecurrentEach bit corresponds to a service. The bit is set to 1 if the service is enabled, and set to 0 if the service is disabled. The various bit positions are: BIT 1…
1.3.6.1.4.1.6321.1.2.3.4.11.5.2.1.5ColumnsecuredClientEnableread-writecurrentEnable/disable the entry.
1.3.6.1.4.1.6321.1.2.3.4.11.8NodeextAlarm
1.3.6.1.4.1.6321.1.2.3.4.11.8.1TableextAlarmTablenot-accessiblecurrentA table that contains external alarm information.
1.3.6.1.4.1.6321.1.2.3.4.11.8.1.1RowextAlarmEntrynot-accessiblecurrentThe entry of external alarm table.
1.3.6.1.4.1.6321.1.2.3.4.11.8.1.1.1ColumnextAlarmIndexread-onlycurrentThe index of the entry.
1.3.6.1.4.1.6321.1.2.3.4.11.8.1.1.2ColumnextAlarmNameread-writecurrentThe external alarm name.
1.3.6.1.4.1.6321.1.2.3.4.11.8.1.1.3ColumnextAlarmStatusread-onlycurrentDispaly 'Normal' or 'Alarm' string
1.3.6.1.4.1.6321.1.2.3.4.11.8.1.1.4ColumnextAlarmTriggeredModeread-writecurrentThe external alarm triggered mode.
1.3.6.1.4.1.6321.1.2.3.4.11.9Nodeuser
1.3.6.1.4.1.6321.1.2.3.4.11.9.1ScalaruserAuthModeread-writecurrentUser authentication procsssing mode.
1.3.6.1.4.1.6321.1.2.3.4.11.9.2ScalaruserAuthServerIpread-writecurrentThe IP address of the authentication server.
1.3.6.1.4.1.6321.1.2.3.4.11.9.3ScalaruserAuthServerPortread-writecurrentThe port of the authentication server.
1.3.6.1.4.1.6321.1.2.3.4.11.9.4ScalaruserAuthServerSecretread-writecurrentThe secret between the authentication server and the NE for authentication process.
1.3.6.1.4.1.6321.1.2.3.4.11.9.5TableuserTablenot-accessiblecurrentA table that contains user information.
1.3.6.1.4.1.6321.1.2.3.4.11.9.5.1RowuserEntrynot-accessiblecurrentAn entry of userTable.
1.3.6.1.4.1.6321.1.2.3.4.11.9.5.1.1ColumnuserNameread-onlycurrentThe user name.
1.3.6.1.4.1.6321.1.2.3.4.11.9.5.1.2ColumnuserPasswordread-createcurrentThe user password.
1.3.6.1.4.1.6321.1.2.3.4.11.9.5.1.3ColumnuserPriviledgeread-createcurrentThe user priviledge to decide what operation the user can and cannot do.
1.3.6.1.4.1.6321.1.2.3.4.11.9.5.1.4ColumnuserRowStatusread-createcurrentThe row status used to create or delete a user.
1.3.6.1.4.1.6321.1.2.3.4.11.9.6ScalaruserAuthDefaultPriviledgeread-writecurrentThe user default priviledge to be assigned when radius authentication succeds but no user priviledge information(radius service-type) is provided.
1.3.6.1.4.1.6321.1.2.3.4.11.10NodeusbCastCtrl
1.3.6.1.4.1.6321.1.2.3.4.11.10.1ScalarusBcastCtrlEnableread-writecurrentEnable/disable upstream broadcast control.
1.3.6.1.4.1.6321.1.2.3.4.11.10.2ScalarusBcastCtrlRateread-writecurrent
1.3.6.1.4.1.6321.1.2.3.4.11.11NodedsQos
1.3.6.1.4.1.6321.1.2.3.4.11.11.1ScalardsQosEnableModeread-writecurrentEnable internal overriding mode to VLAN, DSCP or IP Precedence, or disable the overriding mode.
1.3.6.1.4.1.6321.1.2.3.4.11.11.2ScalardsQosDefaultPriread-writecurrentSet the internal default p.bit after overiding. All values not configured in the overriding table are assigned to the default p.bit
1.3.6.1.4.1.6321.1.2.3.4.11.11.3TabledsQoSOverridingTablenot-accessiblecurrentThis table includes downstream QoS overriding information.
1.3.6.1.4.1.6321.1.2.3.4.11.11.3.1RowdsQoSOverridingEntrynot-accessiblecurrentAn entry in dsQoSOverridingTable.
1.3.6.1.4.1.6321.1.2.3.4.11.11.3.1.1ColumndsQosPriorityread-onlycurrentInternal P.bit after overriding.
1.3.6.1.4.1.6321.1.2.3.4.11.11.3.1.2ColumndsQosValueListread-writecurrentVLAN ID, DSCP, or IP Precedence based on the internal overriding mode configured. VLAN ID 1 ~ 4094, DSCP 0 ~ 63, IP Precedence 0 ~ 7. value_list example: <1>, …
1.3.6.1.4.1.6321.1.2.3.4.11.12ScalarstdioTimeoutread-writecurrentSet the CLI/TELNET/WEB Session timeout, 0, or 1~300 minutes, 0 => disable.
1.3.6.1.4.1.6321.1.2.3.4.11.13ScalarisConfigChangedread-onlycurrentIf system configuration has been changed.
1.3.6.1.4.1.6321.1.2.3.4.11.14NodefwUpgrade
1.3.6.1.4.1.6321.1.2.3.4.11.14.1ScalarfwUpgradeVersionread-writecurrentConfigure the target firmware version that will be upgraded.
1.3.6.1.4.1.6321.1.2.3.4.11.14.2ScalarfwUpgradeCheckread-writecurrentEnable/disable firmware upgrade version checking feature.
1.3.6.1.4.1.6321.1.2.3.4.11.14.3ScalarfwUpgradeStatusread-onlycurrentDisplay current firmware upgrade status.
1.3.6.1.4.1.6321.1.2.3.4.11.15NodedelayedReboot
1.3.6.1.4.1.6321.1.2.3.4.11.15.1ScalardelayedRebootTimerread-writecurrent5~1800 secs, 0: reboot immediately.
1.3.6.1.4.1.6321.1.2.3.4.11.15.2ScalardelayedRebootRemainingTimeread-onlycurrentDisplay the remaining time of scheduled reboot.
1.3.6.1.4.1.6321.1.2.3.4.11.15.3ScalardelayedRebootCancelread-writecurrentcancel the scheduled reboot.
1.3.6.1.4.1.6321.1.2.3.4.12Nodetrap
1.3.6.1.4.1.6321.1.2.3.4.13Nodestatistics
1.3.6.1.4.1.6321.1.2.3.4.13.1ScalarigmpQueryCntTotalread-onlycurrentThe total number of IGMP query messages received.
1.3.6.1.4.1.6321.1.2.3.4.13.2ScalarigmpReportCntTotalread-onlycurrentThe total number of IGMP report messages received.
1.3.6.1.4.1.6321.1.2.3.4.13.3ScalarigmpLeaveCntTotalread-onlycurrentThe total number of IGMP leave messages received.
1.3.6.1.4.1.6321.1.2.3.4.13.4ScalarigmpNumOfActiveGroupsread-onlycurrentThe total number of IGMP learned groups.
1.3.6.1.4.1.6321.1.2.3.4.13.5TableigmpGroupTablenot-accessiblecurrentThis table includes igmp group information.
1.3.6.1.4.1.6321.1.2.3.4.13.5.1RowigmpGroupEntrynot-accessiblecurrentAn entry in igmpGroupTable.
1.3.6.1.4.1.6321.1.2.3.4.13.5.1.1ColumnigmpGroupIpread-onlycurrentigmp group IP
1.3.6.1.4.1.6321.1.2.3.4.13.5.1.2ColumnigmpGroupvidread-onlycurrentvlan id
1.3.6.1.4.1.6321.1.2.3.4.13.5.1.3ColumnigmpGroupnumberOfMembersread-onlycurrentnumber Of Members
1.3.6.1.4.1.6321.1.2.3.4.13.5.1.4ColumnigmpGroupMemberPortsread-onlycurrentGroup Member Ports
1.3.6.1.4.1.6321.1.2.3.4.13.6TableigmpGroupPortTablenot-accessiblecurrentThis table includes igmp Group port information.
1.3.6.1.4.1.6321.1.2.3.4.13.6.1RowigmpGroupPortEntrynot-accessiblecurrentAn entry in igmpGroupPortTable.
1.3.6.1.4.1.6321.1.2.3.4.13.6.1.1ColumnigmpGroupPortIpread-onlycurrentIgmp Group IP
1.3.6.1.4.1.6321.1.2.3.4.13.6.1.2ColumnigmpGroupPortvidread-onlycurrentIgmp Group vid
1.3.6.1.4.1.6321.1.2.3.4.13.7TableigmpGroupV2Tablenot-accessiblecurrentA table that displays IGMP learned group member information.
1.3.6.1.4.1.6321.1.2.3.4.13.7.1RowigmpGroupV2Entrynot-accessiblecurrentAn entry of igmpGroupV2Table.
1.3.6.1.4.1.6321.1.2.3.4.13.7.1.1ColumnigmpGroupV2Vidread-onlycurrentThe IGMP group VLAN ID.
1.3.6.1.4.1.6321.1.2.3.4.13.7.1.2ColumnigmpGroupV2Ipread-onlycurrentThe multicast IP address.
1.3.6.1.4.1.6321.1.2.3.4.13.7.1.3ColumnigmpGroupV2NumOfMembersread-onlycurrentThe number of member ports in the group.
1.3.6.1.4.1.6321.1.2.3.4.13.7.1.4ColumnigmpGroupV2MemberPortsread-onlycurrentThe member port list of the group.
1.3.6.1.4.1.6321.1.2.3.4.13.8TableigmpGroupPortV2Tablenot-accessiblecurrentA table that displays IGMP joined groups in this port.
1.3.6.1.4.1.6321.1.2.3.4.13.8.1RowigmpGroupPortV2Entrynot-accessiblecurrentAn entry of igmpGroupPortV2Table.
1.3.6.1.4.1.6321.1.2.3.4.13.8.1.1ColumnigmpGroupPortV2Vidread-onlycurrentThe IGMP group VLAN ID.
1.3.6.1.4.1.6321.1.2.3.4.13.8.1.2ColumnigmpGroupPortV2Ipread-onlycurrentThe multicast IP address.
1.3.6.1.4.1.6321.1.2.3.4.13.8.1.3ColumnigmpGroupPortV2SourceIpread-onlycurrentThe source IP address that joins the IGMP group.
1.3.6.1.4.1.6321.1.2.3.4.13.9TableigmpPortCtrlPduTablenot-accessiblecurrentA table that displays IGMP related counter values in this port.
1.3.6.1.4.1.6321.1.2.3.4.13.9.1RowigmpPortCtrlPduEntrynot-accessiblecurrentAn entry of igmpPortCtrlPduTable.
1.3.6.1.4.1.6321.1.2.3.4.13.9.1.1ColumnigmpPortCtrlPduQueryCntread-onlycurrentThe total number of IGMP query messages received in this port.
1.3.6.1.4.1.6321.1.2.3.4.13.9.1.2ColumnigmpPortCtrlPduReportCntread-onlycurrentThe total number of IGMP report messages received in this port.
1.3.6.1.4.1.6321.1.2.3.4.13.9.1.3ColumnigmpPortCtrlPduLeaveCntread-onlycurrentThe total number of IGMP leave messages received in this port.
1.3.6.1.4.1.6321.1.2.3.4.13.9.1.4ColumnigmpPortNumOfActiveGroupsread-onlycurrentThe total number of active IGMP groups in this port.
1.3.6.1.4.1.6321.1.2.3.4.13.9.1.5ColumnigmpPortCtrlAuditLeaveCntread-onlycurrentThe total number of groups left by audit query.
1.3.6.1.4.1.6321.1.2.3.4.13.11NodedhcpStats
1.3.6.1.4.1.6321.1.2.3.4.13.11.1TabledhcpSnoopIpTablenot-accessiblecurrentThis table shows the IP addresses and netmasks offered by the DHCP server.
1.3.6.1.4.1.6321.1.2.3.4.13.11.1.1RowdhcpSnoopIpEntrynot-accessiblecurrentAn entry of dhcpSnoopIpTable.
1.3.6.1.4.1.6321.1.2.3.4.13.11.1.1.1ColumndhcpSnoopIpread-onlycurrentThe snooped IP address.
1.3.6.1.4.1.6321.1.2.3.4.13.11.1.1.2ColumndhcpSnoopMacread-onlycurrentThe snooped MAC address.
1.3.6.1.4.1.6321.1.2.3.4.13.11.1.1.3ColumndhcpSnoopVidread-onlycurrentThe snooped VLAN ID.
1.3.6.1.4.1.6321.1.2.3.4.13.11.1.1.4ColumndhcpSnoopMaskread-onlycurrentThe snooped IP mask
1.3.6.1.4.1.6321.1.2.3.4.13.11.1.1.5ColumndhcpSnoopGatewayread-onlycurrentThe snooped Gateway.
1.3.6.1.4.1.6321.1.2.3.4.13.11.1.1.6ColumndhcpSnoopRouteMapread-onlycurrentThe refrence bit map of the dhcp route
1.3.6.1.4.1.6321.1.2.3.4.13.11.2TabledhcpSnoopCounterTablenot-accessiblecurrentThis table shows the DHCP statistics.
1.3.6.1.4.1.6321.1.2.3.4.13.11.2.1RowdhcpSnoopCounterEntrynot-accessiblecurrentAn entry of dhcpSnoopCounterTable.
1.3.6.1.4.1.6321.1.2.3.4.13.11.2.1.1ColumndhcpDiscoveryread-onlycurrentThe total number of received DHCP server discovery packets.
1.3.6.1.4.1.6321.1.2.3.4.13.11.2.1.2ColumndhcpOfferread-onlycurrentThe total number of received DHCP server offer packets.
1.3.6.1.4.1.6321.1.2.3.4.13.11.2.1.3ColumndhcpRequestread-onlycurrentThe total number of received DHCP IP request packets.
1.3.6.1.4.1.6321.1.2.3.4.13.11.2.1.4ColumndhcpAckread-onlycurrentThe total number of received DHCP IP acknowledge packets.
1.3.6.1.4.1.6321.1.2.3.4.13.11.2.1.5ColumndhcpAckBySnoopFullread-onlycurrentThe total number of received DHCP IP acknowledge packets that replace the oldest snooping entry in snooping table due to table full.
1.3.6.1.4.1.6321.1.2.3.4.13.11.3TabledhcpRouteTablenot-accessiblecurrentA table that contains dhcp route information.
1.3.6.1.4.1.6321.1.2.3.4.13.11.3.1RowdhcpRouteEntrynot-accessiblecurrentAn entry of dhcpRouteTable.
1.3.6.1.4.1.6321.1.2.3.4.13.11.3.1.1ColumndhcpRouteIndexread-onlycurrent
1.3.6.1.4.1.6321.1.2.3.4.13.11.3.1.2ColumndhcpRouteVidread-onlycurrentThe VLAN-ID refering to this dhcp route.
1.3.6.1.4.1.6321.1.2.3.4.13.11.3.1.3ColumndhcpRouteIPread-onlycurrentIP of this dhcp route
1.3.6.1.4.1.6321.1.2.3.4.13.11.3.1.4ColumndhcpRouteMaskread-onlycurrentThe subnet mask of source IP mask.
1.3.6.1.4.1.6321.1.2.3.4.13.11.3.1.5ColumndhcpRouteGwIPread-onlycurrentThe gateway IP address.
1.3.6.1.4.1.6321.1.2.3.4.13.12NodepaepvcStats
1.3.6.1.4.1.6321.1.2.3.4.13.12.1TablepaepvcSessionTablenot-accessiblecurrentThis table shows the paepvc session statistics.
1.3.6.1.4.1.6321.1.2.3.4.13.12.1.1RowpaepvcSessionEntrynot-accessiblecurrentAn entry of paepvcSessionTable.
1.3.6.1.4.1.6321.1.2.3.4.13.12.1.1.1ColumnpaepvcSessionVpiread-onlycurrentThe PAEPVC VPI.
1.3.6.1.4.1.6321.1.2.3.4.13.12.1.1.2ColumnpaepvcSessionVciread-onlycurrentThe PAEPVC VCI.
1.3.6.1.4.1.6321.1.2.3.4.13.12.1.1.3ColumnpaepvcSessionStateread-onlycurrentThe PAEPVC status.
1.3.6.1.4.1.6321.1.2.3.4.13.12.1.1.4ColumnpaepvcSessionIdread-onlycurrentThe PAEPVC session ID.
1.3.6.1.4.1.6321.1.2.3.4.13.12.1.1.5ColumnpaepvcSessionUptimeread-onlycurrentThe PAEPVC session uptime.
1.3.6.1.4.1.6321.1.2.3.4.13.12.1.1.6ColumnpaepvcSessionacnameread-onlycurrentAccess concentrator name.
1.3.6.1.4.1.6321.1.2.3.4.13.12.1.1.7ColumnpaepvcSessionsrvcnameread-onlycurrentService name.
1.3.6.1.4.1.6321.1.2.3.4.13.12.2TablepaepvcCountTablenot-accessiblecurrentThis table shows the paepvc counters.
1.3.6.1.4.1.6321.1.2.3.4.13.12.2.1RowpaepvcCountEntrynot-accessiblecurrentAn entry of paepvcCountTable.
1.3.6.1.4.1.6321.1.2.3.4.13.12.2.1.1ColumnpaepvcCountVpiread-onlycurrentThe PAEPVC VPI.
1.3.6.1.4.1.6321.1.2.3.4.13.12.2.1.2ColumnpaepvcCountVciread-onlycurrentThe PAEPVC VCI.
1.3.6.1.4.1.6321.1.2.3.4.13.12.2.1.3ColumnpaepvcCountPppLcpCfgReqRxread-onlycurrentThe number of ppp lcp config-request received.
1.3.6.1.4.1.6321.1.2.3.4.13.12.2.1.4ColumnpaepvcCountPppLcpEchoReqRxread-onlycurrentThe number of ppp lcp echo-request received.
1.3.6.1.4.1.6321.1.2.3.4.13.12.2.1.5ColumnpaepvcCountPppLcpEchoReplyRxread-onlycurrentThe number of ppp lcp echo-reply received.
1.3.6.1.4.1.6321.1.2.3.4.13.12.2.1.6ColumnpaepvcCountPadiTxread-onlycurrentThe number of pppoe padi transfered
1.3.6.1.4.1.6321.1.2.3.4.13.12.2.1.7ColumnpaepvcCountPadoRxread-onlycurrentThe number of pppoe pado received
1.3.6.1.4.1.6321.1.2.3.4.13.12.2.1.8ColumnpaepvcCountPadrTxread-onlycurrentThe number of pppoe padr transfered
1.3.6.1.4.1.6321.1.2.3.4.13.12.2.1.9ColumnpaepvcCountPadsRxread-onlycurrentThe number of pppoe pads received
1.3.6.1.4.1.6321.1.2.3.4.13.12.2.1.10ColumnpaepvcCountPadtTxread-onlycurrentThe number of pppoe padt transfered
1.3.6.1.4.1.6321.1.2.3.4.13.12.2.1.11ColumnpaepvcCountPadtRxread-onlycurrentThe number of pppoe padt received
1.3.6.1.4.1.6321.1.2.3.4.13.12.2.1.12ColumnpaepvcCountSrvcnameErrRxread-onlycurrentThe number of pppoe service name error received
1.3.6.1.4.1.6321.1.2.3.4.13.12.2.1.13ColumnpaepvcCountAcSystemErrRxread-onlycurrentThe number of pppoe access concentrator name error received
1.3.6.1.4.1.6321.1.2.3.4.13.12.2.1.14ColumnpaepvcCountGenericErrTxread-onlycurrentThe number of pppoe generic error transfered
1.3.6.1.4.1.6321.1.2.3.4.13.12.2.1.15ColumnpaepvcCountGenericErrRxread-onlycurrentThe number of pppoe generic error received
1.3.6.1.4.1.6321.1.2.3.4.13.13NodemacStats
1.3.6.1.4.1.6321.1.2.3.4.13.13.1ScalarmacDisplayTargetread-writecurrentThis managed object is a filter used for identify the target from which the MAC addresses are learned in macTable. The target could be: 99: all ports in the sy…
1.3.6.1.4.1.6321.1.2.3.4.13.13.2TablemacTablenot-accessiblecurrentA table that contains information about unicast entries for which the bridge has forwarding and/or filtering information. This information is used by the trans…
1.3.6.1.4.1.6321.1.2.3.4.13.13.2.1RowmacEntrynot-accessiblecurrentAn entry of macTable.
1.3.6.1.4.1.6321.1.2.3.4.13.13.2.1.1ColumnmacAddressread-onlycurrentA unicast MAC address for which the bridge has forwarding and/or filtering information.
1.3.6.1.4.1.6321.1.2.3.4.13.13.2.1.2ColumnmacPortread-onlycurrentThe port from which the mac address has been learned.
1.3.6.1.4.1.6321.1.2.3.4.13.13.2.1.3ColumnmacStatusread-onlycurrentThe status of this entry.
1.3.6.1.4.1.6321.1.2.3.4.13.13.2.1.4ColumnmacVidread-onlycurrentThe vlan id of this entry.
1.3.6.1.4.1.6321.1.2.3.4.13.15Noden1macStats
1.3.6.1.4.1.6321.1.2.3.4.13.15.1Tablen1macTablenot-accessiblecurrentA table that contains information about N to 1 MAC translation, including connection type, session id/IP and MAC address.
1.3.6.1.4.1.6321.1.2.3.4.13.15.1.1Rown1macEntrynot-accessiblecurrentAn entry of n1macTable.
1.3.6.1.4.1.6321.1.2.3.4.13.15.1.1.1Columnn1macProtoValread-onlycurrentThe protocol value of specified connection. If the connection is pppoe/pppoaoe, the value stands for session id; if the connection is ipoe/ipoaoe, the value me…
1.3.6.1.4.1.6321.1.2.3.4.13.15.1.1.2Columnn1macProtoTyperead-onlycurrentProtocol type of the connection which the MAC is translated.
1.3.6.1.4.1.6321.1.2.3.4.13.15.1.1.3Columnn1macMacAddrread-onlycurrentThe translated MAC address.
1.3.6.1.4.1.6321.1.2.3.4.13.16NodeenetStats
1.3.6.1.4.1.6321.1.2.3.4.13.16.1ScalarenetPrimaryPortread-onlycurrentIfIndex is used for identifying the Primary Ethernet Port when dot3ad is disabled.
1.3.6.1.4.1.6321.1.2.3.4.13.16.2TableenetSfpInfoTablenot-accessiblecurrentThis table includes sfp info of enet port.
1.3.6.1.4.1.6321.1.2.3.4.13.16.2.1RowenetSfpInfoEntrynot-accessiblecurrentAn entry in enetSfpInfoTable.
1.3.6.1.4.1.6321.1.2.3.4.13.16.2.1.1ColumnenetSfpInfoTxpowerread-onlycurrentMeasured Tx Output Power.
1.3.6.1.4.1.6321.1.2.3.4.13.16.2.1.2ColumnenetSfpInfoRxpowerread-onlycurrentMeasured Rx Output Power.
1.3.6.1.4.1.6321.1.2.3.4.13.16.2.1.3ColumnenetSfpInfoTemperatureread-onlycurrentMeasured temperature.
1.3.6.1.4.1.6321.1.2.3.4.13.16.2.1.4ColumnenetSfpInfoTxBiasread-onlycurrentMeasured tx bias.
1.3.6.1.4.1.6321.1.2.3.4.13.16.2.1.5ColumnenetSfpInfoVoltageread-onlycurrentMeasured voltage.
1.3.6.1.4.1.6321.1.2.3.4.13.17NodevdslStats
1.3.6.1.4.1.6321.1.2.3.4.13.17.2TablevdslLineStatsTablenot-accessiblecurrentThe table displays VDSL line statistics.
1.3.6.1.4.1.6321.1.2.3.4.13.17.2.1RowvdslLineStatsEntrynot-accessiblecurrentAn entry of vdslLineStatsTable.
1.3.6.1.4.1.6321.1.2.3.4.13.17.2.1.1ColumnvdslLineStatsVtucBits1read-onlycurrentThe object provides Bits for the VTU-C 1024 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 15.
1.3.6.1.4.1.6321.1.2.3.4.13.17.2.1.2ColumnvdslLineStatsVtucBits2read-onlycurrentThe object provides Bits for the VTU-C 1024 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 15.
1.3.6.1.4.1.6321.1.2.3.4.13.17.2.1.3ColumnvdslLineStatsVtucBits3read-onlycurrentThe object provides Bits for the VTU-C 1024 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 15.
1.3.6.1.4.1.6321.1.2.3.4.13.17.2.1.4ColumnvdslLineStatsVtucBits4read-onlycurrentThe object provides Bits for the VTU-C 1024 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 15.
1.3.6.1.4.1.6321.1.2.3.4.13.17.2.1.5ColumnvdslLineStatsVturBits1read-onlycurrentThe object provides Bits for the VTU-R 1024 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 15.
1.3.6.1.4.1.6321.1.2.3.4.13.17.2.1.6ColumnvdslLineStatsVturBits2read-onlycurrentThe object provides Bits for the VTU-R 1024 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 15.
1.3.6.1.4.1.6321.1.2.3.4.13.17.2.1.7ColumnvdslLineStatsVturBits3read-onlycurrentThe object provides Bits for the VTU-R 1024 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 15.
1.3.6.1.4.1.6321.1.2.3.4.13.17.2.1.8ColumnvdslLineStatsVturBits4read-onlycurrentThe object provides Bits for the VTU-R 1024 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 15.
1.3.6.1.4.1.6321.1.2.3.4.13.17.2.1.9ColumnvdslLineStatsVtucGain1read-onlycurrentThe object provides Gain for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in…
1.3.6.1.4.1.6321.1.2.3.4.13.17.2.1.10ColumnvdslLineStatsVtucGain2read-onlycurrentThe object provides Gain for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in…
1.3.6.1.4.1.6321.1.2.3.4.13.17.2.1.11ColumnvdslLineStatsVtucGain3read-onlycurrentThe object provides Gain for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in…
1.3.6.1.4.1.6321.1.2.3.4.13.17.2.1.12ColumnvdslLineStatsVtucGain4read-onlycurrentThe object provides Gain for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in…
1.3.6.1.4.1.6321.1.2.3.4.13.17.2.1.13ColumnvdslLineStatsVtucGain5read-onlycurrentThe object provides Gain for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in…
1.3.6.1.4.1.6321.1.2.3.4.13.17.2.1.14ColumnvdslLineStatsVtucGain6read-onlycurrentThe object provides Gain for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in…
1.3.6.1.4.1.6321.1.2.3.4.13.17.2.1.15ColumnvdslLineStatsVtucGain7read-onlycurrentThe object provides Gain for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in…
1.3.6.1.4.1.6321.1.2.3.4.13.17.2.1.16ColumnvdslLineStatsVtucGain8read-onlycurrentThe object provides Gain for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in…
1.3.6.1.4.1.6321.1.2.3.4.13.17.2.1.17ColumnvdslLineStatsVturGain1read-onlycurrentThe object provides Gain for the VTU-R 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in…
1.3.6.1.4.1.6321.1.2.3.4.13.17.2.1.18ColumnvdslLineStatsVturGain2read-onlycurrentThe object provides Gain for the VTU-R 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in…
1.3.6.1.4.1.6321.1.2.3.4.13.17.2.1.19ColumnvdslLineStatsVturGain3read-onlycurrentThe object provides Gain for the VTU-R 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in…
1.3.6.1.4.1.6321.1.2.3.4.13.17.2.1.20ColumnvdslLineStatsVturGain4read-onlycurrentThe object provides Gain for the VTU-R 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in…
1.3.6.1.4.1.6321.1.2.3.4.13.17.2.1.21ColumnvdslLineStatsVturGain5read-onlycurrentThe object provides Gain for the VTU-R 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in…
1.3.6.1.4.1.6321.1.2.3.4.13.17.2.1.22ColumnvdslLineStatsVturGain6read-onlycurrentThe object provides Gain for the VTU-R 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in…
1.3.6.1.4.1.6321.1.2.3.4.13.17.2.1.23ColumnvdslLineStatsVturGain7read-onlycurrentThe object provides Gain for the VTU-R 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in…
1.3.6.1.4.1.6321.1.2.3.4.13.17.2.1.24ColumnvdslLineStatsVturGain8read-onlycurrentThe object provides Gain for the VTU-R 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in…
1.3.6.1.4.1.6321.1.2.3.4.13.17.2.1.25ColumnvdslLineStatsVtucHlogread-onlycurrentThe object provides Hlog for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. The real Hlog(f) value is represented as (6-m(i)/1…
1.3.6.1.4.1.6321.1.2.3.4.13.17.2.1.26ColumnvdslLineStatsVturHlogread-onlycurrentThe object provides Hlog for the VTU-R 512 subcarriers. Each subcarrier takes two octets to store the value. The real Hlog(f) value is represented as (6-m(i)/1…
1.3.6.1.4.1.6321.1.2.3.4.13.17.2.1.27ColumnvdslLineStatsVtucQlnread-onlycurrentThe object provides Qln for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. The QLN(f) is represented as ( -23-n(i)/2), with n(…
1.3.6.1.4.1.6321.1.2.3.4.13.17.2.1.28ColumnvdslLineStatsVturQlnread-onlycurrentThe object provides Qln for the VTU-R 512 subcarriers. Each subcarrier takes two octets to store the value. The QLN(f) is represented as ( -23-n(i)/2), with n(…
1.3.6.1.4.1.6321.1.2.3.4.13.17.2.1.29ColumnvdslLineStatsVtucSnrread-onlycurrentThe object provides Snr for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. Octet i is set to a value in the range 0 to 254 (-3…
1.3.6.1.4.1.6321.1.2.3.4.13.17.2.1.30ColumnvdslLineStatsVturSnrread-onlycurrentThe object provides Snr for the VTU-R 512 subcarriers. Each subcarrier takes two octets to store the value. Octet i is set to a value in the range 0 to 254 (-3…
1.3.6.1.4.1.6321.1.2.3.4.13.17.2.1.31ColumnvdslLineStatsVtucTssiread-onlycurrentThe object provides Tssi for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. Each value in this array is 16 bits wide. The tssi…
1.3.6.1.4.1.6321.1.2.3.4.13.17.2.1.32ColumnvdslLineStatsVturTssiread-onlycurrentThe object provides Tssi for the VTU-R 512 subcarriers. Each subcarrier takes two octets to store the value. Each value in this array is 16 bits wide. The tssi…
1.3.6.1.4.1.6321.1.2.3.4.13.17.2.1.33ColumnvdslLineStatsProtocolread-onlycurrentThe actual line protocol.
1.3.6.1.4.1.6321.1.2.3.4.13.18NodevoipStats
1.3.6.1.4.1.6321.1.2.3.4.13.18.1TablevoipLineStatusTablenot-accessiblecurrentThe table displays VoIP line status.
1.3.6.1.4.1.6321.1.2.3.4.13.18.1.1RowvoipLineStatusEntrynot-accessiblecurrentAn entry of voipLineStatusTable.
1.3.6.1.4.1.6321.1.2.3.4.13.18.1.1.1ColumnvoipLineStatusPhoneStatusread-onlycurrentPhone status of the line.
1.3.6.1.4.1.6321.1.2.3.4.13.18.1.1.2ColumnvoipLineStatusServiceStatusread-onlycurrentService status of the line.
1.3.6.1.4.1.6321.1.2.3.4.13.18.2TablevoipLineInfoTablenot-accessiblecurrentThe table displays VoIP line information.
1.3.6.1.4.1.6321.1.2.3.4.13.18.2.1RowvoipLineInfoEntrynot-accessiblecurrentAn entry of voipLineInfoTable.
1.3.6.1.4.1.6321.1.2.3.4.13.18.2.1.1ColumnvoipLineInfoSipLocalUriread-onlycurrent
1.3.6.1.4.1.6321.1.2.3.4.13.18.2.1.2ColumnvoipLineInfoSipRemoteUriread-onlycurrent
1.3.6.1.4.1.6321.1.2.3.4.13.18.2.1.3ColumnvoipLineInfoRtpTxCodecTyperead-onlycurrent
1.3.6.1.4.1.6321.1.2.3.4.13.18.2.1.4ColumnvoipLineInfoRtpRxCodecTyperead-onlycurrent
1.3.6.1.4.1.6321.1.2.3.4.13.18.2.1.5ColumnvoipLineInfoRtpTxPtread-onlycurrent
1.3.6.1.4.1.6321.1.2.3.4.13.18.2.1.6ColumnvoipLineInfoRtpRxPtread-onlycurrent
1.3.6.1.4.1.6321.1.2.3.4.13.18.2.1.7ColumnvoipLineInfoRtpLocalIpread-onlycurrent
1.3.6.1.4.1.6321.1.2.3.4.13.18.2.1.8ColumnvoipLineInfoRtpRemoteIpread-onlycurrent
1.3.6.1.4.1.6321.1.2.3.4.13.18.2.1.9ColumnvoipLineInfoRtpLocalPortread-onlycurrent
1.3.6.1.4.1.6321.1.2.3.4.13.18.2.1.10ColumnvoipLineInfoRtpRemotePortread-onlycurrent
1.3.6.1.4.1.6321.1.2.3.4.13.18.2.1.11ColumnvoipLineInfoSipLocalUri2read-onlycurrent
1.3.6.1.4.1.6321.1.2.3.4.13.18.2.1.12ColumnvoipLineInfoSipRemoteUri2read-onlycurrent
1.3.6.1.4.1.6321.1.2.3.4.13.18.2.1.13ColumnvoipLineInfoRtpTxCodecType2read-onlycurrent
1.3.6.1.4.1.6321.1.2.3.4.13.18.2.1.14ColumnvoipLineInfoRtpRxCodecType2read-onlycurrent
1.3.6.1.4.1.6321.1.2.3.4.13.18.2.1.15ColumnvoipLineInfoRtpTxPt2read-onlycurrent
1.3.6.1.4.1.6321.1.2.3.4.13.18.2.1.16ColumnvoipLineInfoRtpRxPt2read-onlycurrent
1.3.6.1.4.1.6321.1.2.3.4.13.18.2.1.17ColumnvoipLineInfoRtpLocalIp2read-onlycurrent
1.3.6.1.4.1.6321.1.2.3.4.13.18.2.1.18ColumnvoipLineInfoRtpRemoteIp2read-onlycurrent
1.3.6.1.4.1.6321.1.2.3.4.13.18.2.1.19ColumnvoipLineInfoRtpLocalPort2read-onlycurrent
1.3.6.1.4.1.6321.1.2.3.4.13.18.2.1.20ColumnvoipLineInfoRtpRemotePort2read-onlycurrent
1.3.6.1.4.1.6321.1.2.3.4.13.18.3NodevoipH248Status
1.3.6.1.4.1.6321.1.2.3.4.13.18.3.1ScalarvoipH248StatusMgNameread-onlycurrentMG name.
1.3.6.1.4.1.6321.1.2.3.4.13.18.3.2ScalarvoipH248StatusMgStatusread-onlycurrentMg connection status.
1.3.6.1.4.1.6321.1.2.3.4.13.18.4NodevoipActiveCallStat
1.3.6.1.4.1.6321.1.2.3.4.13.18.4.1ScalarvoipActiveCallStatCurrentActiveCallsread-onlycurrentNumber of current active calls.
1.3.6.1.4.1.6321.1.2.3.4.13.18.4.2ScalarvoipActiveCallStatFailAttemptsread-onlycurrentFailed attempts to setup active call.
1.3.6.1.4.1.6321.1.2.3.4.13.18.4.3ScalarvoipActiveCallStatClearread-writecurrentThe manager sets the corresponding bit value to 1 to start the operation and the agent clears the object to zero when the operation is successfully completed. …
1.3.6.1.4.1.6321.1.2.3.4.13.19NodemacffStats
1.3.6.1.4.1.6321.1.2.3.4.13.19.1TablemacFfStatsTablenot-accessiblecurrentA table that contains MAC Force Forwarding static configuration and dynamic information.
1.3.6.1.4.1.6321.1.2.3.4.13.19.1.1RowmacFfStatsEntrynot-accessiblecurrentAn entry of macFfStatsTable.
1.3.6.1.4.1.6321.1.2.3.4.13.19.1.1.1ColumnmacFfStatsIndexread-onlycurrentIndex of the MACFF.
1.3.6.1.4.1.6321.1.2.3.4.13.19.1.1.2ColumnmacFfStatsVidread-onlycurrentThe VLAN-ID refering to this AR/AS.
1.3.6.1.4.1.6321.1.2.3.4.13.19.1.1.3ColumnmacFfStatsArIPread-onlycurrentIP of this AR/AS
1.3.6.1.4.1.6321.1.2.3.4.13.19.1.1.4ColumnmacFfStatsSrcIPread-onlycurrentThe source IP address of the MACFF.
1.3.6.1.4.1.6321.1.2.3.4.13.19.1.1.5ColumnmacFfStatsSrcMaskread-onlycurrentThe subnet mask of source IP mask.
1.3.6.1.4.1.6321.1.2.3.4.13.19.2TablemacFfArpTablenot-accessiblecurrentA table that contains MAC Force Forwarding ARP information.
1.3.6.1.4.1.6321.1.2.3.4.13.19.2.1RowmacFfArpEntrynot-accessiblecurrentAn entry of macFfArpTable.
1.3.6.1.4.1.6321.1.2.3.4.13.19.2.1.1ColumnmacFfArpVidread-onlycurrentThe VLAN-ID refering to this AR/AS.
1.3.6.1.4.1.6321.1.2.3.4.13.19.2.1.2ColumnmacFfArpIPread-onlycurrentIP of this AR/AS.
1.3.6.1.4.1.6321.1.2.3.4.13.19.2.1.3ColumnmacFfArpPortread-onlycurrentPort of this AR/AS.
1.3.6.1.4.1.6321.1.2.3.4.13.19.2.1.4ColumnmacFfArpMacread-onlycurrentMAC address of the AR or AS.
1.3.6.1.4.1.6321.1.2.3.4.13.19.3TablemacFfArpCounterTablenot-accessiblecurrentA table that contains MAC Force Forwarding ARP counter information.
1.3.6.1.4.1.6321.1.2.3.4.13.19.3.1RowmacFfArpCounterEntrynot-accessiblecurrentAn entry of macFfArpCounterTable.
1.3.6.1.4.1.6321.1.2.3.4.13.19.3.1.1ColumnmacFfArpCounterRequestTXread-onlycurrentARP Request TX counter.
1.3.6.1.4.1.6321.1.2.3.4.13.19.3.1.2ColumnmacFfArpCounterRequestRXread-onlycurrentARP Request RX counter.
1.3.6.1.4.1.6321.1.2.3.4.13.19.3.1.3ColumnmacFfArpCounterRequestRXDropread-onlycurrentARP Request RX drop counter.
1.3.6.1.4.1.6321.1.2.3.4.13.19.3.1.4ColumnmacFfArpCounterReplyTXread-onlycurrentARP Reply TX counter.
1.3.6.1.4.1.6321.1.2.3.4.13.19.3.1.5ColumnmacFfArpCounterReplyRXread-onlycurrentARP Reply RX counter.
1.3.6.1.4.1.6321.1.2.3.4.13.19.3.1.6ColumnmacFfArpCounterReplyRXDropread-onlycurrentARP Reply RX drop counter.
1.3.6.1.4.1.6321.1.2.3.4.13.20NodeadslStats
1.3.6.1.4.1.6321.1.2.3.4.13.20.1TableadslPortUtilTablenot-accessiblecurrentThis table includes adsl port utilization.
1.3.6.1.4.1.6321.1.2.3.4.13.20.1.1RowadslPortUtilEntrynot-accessiblecurrentAn entry in adslPortUtilEntry.
1.3.6.1.4.1.6321.1.2.3.4.13.20.1.1.1ColumnadslPortUtilTxread-onlycurrentMeasure adsl port's tx utilization.
1.3.6.1.4.1.6321.1.2.3.4.13.20.1.1.2ColumnadslPortUtilRxread-onlycurrentMeasure adsl port's rx utilization.
1.3.6.1.4.1.6321.1.2.3.4.13.20.1.1.3ColumnadslStatsXturInpread-onlycurrentXTUR minimum INP value.
1.3.6.1.4.1.6321.1.2.3.4.13.20.1.1.4ColumnadslStatsXtucInpread-onlycurrentXTUC minimum INP valu.
1.3.6.1.4.1.6321.1.2.3.4.14Nodeclear
1.3.6.1.4.1.6321.1.2.3.4.14.1ScalarcounterClearTargetread-writecurrentThis managed object is used for identify the target on which the counter would be cleared. The target is encoded as: Byte 1: reserved Byte 2~3: reserved Byte 4…
1.3.6.1.4.1.6321.1.2.3.4.14.2ScalarcounterClearOpsread-writecurrentThe corresponding bit is set to 1 to start the operation. The various bit positions are: BIT 1: clear interface counters BIT 2: clear pvc packet counters BIT 3…
1.3.6.1.4.1.6321.1.2.3.4.14.3ScalarcounterClearVpiread-writecurrentVPI of the pvc whose counters would be cleared.
1.3.6.1.4.1.6321.1.2.3.4.14.4ScalarcounterClearVciread-writecurrentVCI of the pvc whose counters would be cleared.
1.3.6.1.4.1.6321.1.2.3.4.16Nodevoip
1.3.6.1.4.1.6321.1.2.3.4.16.1NodevoipArp
1.3.6.1.4.1.6321.1.2.3.4.16.1.1ScalarvoipArpFlushOpsread-writecurrentSet the object to 1 to start flushing.
1.3.6.1.4.1.6321.1.2.3.4.16.1.2TablevoipArpShowTablenot-accessiblecurrentDisplay ARP entries learnt in specified slot.
1.3.6.1.4.1.6321.1.2.3.4.16.1.2.1RowvoipArpShowEntrynot-accessiblecurrentAn entry of voipArpShowTable.
1.3.6.1.4.1.6321.1.2.3.4.16.1.2.1.1ColumnvoipArpShowIpread-onlycurrent
1.3.6.1.4.1.6321.1.2.3.4.16.1.2.1.2ColumnvoipArpShowMacread-onlycurrent
1.3.6.1.4.1.6321.1.2.3.4.16.2NodevoipSip
1.3.6.1.4.1.6321.1.2.3.4.16.2.1ScalarmaxNumOfVoipNumberPlanread-onlycurrentThe maximum number of VoIP number plan supported by the system.
1.3.6.1.4.1.6321.1.2.3.4.16.2.2TablevoipNumberPlanTablenot-accessiblecurrentConfigure numbering plan entry of specified index in specified payphone charging table.
1.3.6.1.4.1.6321.1.2.3.4.16.2.2.1RowvoipNumberPlanEntrynot-accessiblecurrentAn entry of voipNumberPlanTable.
1.3.6.1.4.1.6321.1.2.3.4.16.2.2.1.1ColumnvoipNumberPlanNameread-onlycurrentNumbering plan table name.
1.3.6.1.4.1.6321.1.2.3.4.16.2.2.1.2ColumnvoipNumberPlanIndexread-onlycurrent
1.3.6.1.4.1.6321.1.2.3.4.16.2.2.1.3ColumnvoipNumberPlanPatternread-createcurrentAllowed characters are 0~9, *, T, S, P, x, ., | and range format characters that include '~', ',' and parenthesis '(', ')', brackets '[', ']', braces '{', '}' …
1.3.6.1.4.1.6321.1.2.3.4.16.2.2.1.4ColumnvoipNumberPlanRuleread-createcurrentAllowed characters are 0~9, and '\c' stand for country code, '\d' stand for national destination code, '\1' stand for matched string enclosed by the parenthesi…
1.3.6.1.4.1.6321.1.2.3.4.16.2.2.1.5ColumnvoipNumberPlanRowStatusread-createcurrentThis object is used to create a new entry or delete an existing entry in this table.
1.3.6.1.4.1.6321.1.2.3.4.16.2.3TablevoipNumberPlanDftTablenot-accessiblecurrentConfigure the action rule after inter-digit timeout in specified entry of numbering plan table.
1.3.6.1.4.1.6321.1.2.3.4.16.2.3.1RowvoipNumberPlanDftEntrynot-accessiblecurrentAn entry of voipNumberDftPlanTable.
1.3.6.1.4.1.6321.1.2.3.4.16.2.3.1.1ColumnvoipNumberPlanDftRuleread-createcurrentAllowed characters are 0~9, and '\c' stand for country code, '\d' stand for national destination code, '\1' stand for matched string enclosed by the parenthesi…
1.3.6.1.4.1.6321.1.2.3.4.16.2.4NodedigitSetup
1.3.6.1.4.1.6321.1.2.3.4.16.2.4.1NodetimeoutSetup
1.3.6.1.4.1.6321.1.2.3.4.16.2.4.1.1ScalarinitialTimeoutread-writecurrentFirst digit must be dialed before this timeout, 1 ~ 20 seconds.
1.3.6.1.4.1.6321.1.2.3.4.16.2.4.1.2ScalarinterDigitTimeoutread-writecurrentIf no pattern string is fully matched, the inter-digit timeout will trigger device to send out current dialed digits, 1 ~ 20 seconds.
1.3.6.1.4.1.6321.1.2.3.4.16.2.4.1.3ScalardigitPauseTimeoutread-writecurrentIf a pattern string is end with the T pattern, the pattern string will not be matched until the timeout happens, 1 ~ 20 seconds.
1.3.6.1.4.1.6321.1.2.3.4.16.2.4.1.4ScalarmatchingTimeoutread-writecurrentIf a pattern string is fully matched, and there are other pattern strings partially matched, the pattern string will be sent out if the timeout happens, 1 ~ 20…
1.3.6.1.4.1.6321.1.2.3.4.16.3NodevoipIp
1.3.6.1.4.1.6321.1.2.3.4.16.3.1ScalarvoipIpSetIpread-writecurrentVoIP's IP address.
1.3.6.1.4.1.6321.1.2.3.4.16.3.2ScalarvoipIpSetVidread-writecurrentVoIP's VLAN ID.
1.3.6.1.4.1.6321.1.2.3.4.16.3.3ScalarvoipIpSetMaskread-writecurrentVoIP's network mask.
1.3.6.1.4.1.6321.1.2.3.4.16.3.4ScalarvoipIpSetDhcpClientEnableread-writecurrentEnable/disable VoIP's DHCP Client.
1.3.6.1.4.1.6321.1.2.3.4.16.3.5ScalarvoipIpGatewayread-writecurrentIP of default VoIP gateway.
1.3.6.1.4.1.6321.1.2.3.4.16.4NodevoipDns
1.3.6.1.4.1.6321.1.2.3.4.16.4.1ScalarvoipDnsIpread-writecurrentIP address.
1.3.6.1.4.1.6321.1.2.3.4.16.7ScalarmaxNumOfVoipRouteread-onlycurrentThe maximum number of VoIP routing entries.
1.3.6.1.4.1.6321.1.2.3.4.16.8TablevoipRouteTablenot-accessiblecurrent
1.3.6.1.4.1.6321.1.2.3.4.16.8.1RowvoipRouteEntrynot-accessiblecurrentAn entry of voipRouteTable.
1.3.6.1.4.1.6321.1.2.3.4.16.8.1.1ColumnvoipRouteIpread-onlycurrentIP address.
1.3.6.1.4.1.6321.1.2.3.4.16.8.1.2ColumnvoipRouteGatewayread-onlycurrentGateway IP.
1.3.6.1.4.1.6321.1.2.3.4.16.8.1.3ColumnvoipRouteMaskread-onlycurrentNetwork mask.
1.3.6.1.4.1.6321.1.2.3.4.16.8.1.4ColumnvoipRouteMetricread-createcurrentMetric number of the route.
1.3.6.1.4.1.6321.1.2.3.4.16.8.1.5ColumnvoipRouteRowStatusread-createcurrentThis object is used to create a new entry or delete an existing entry in this table.
1.3.6.1.4.1.6321.1.2.3.4.16.9ScalarvoipCountryCoderead-writecurrentConfigure country (information) for VoIP services.
1.3.6.1.4.1.6321.1.2.3.4.16.10NodevoipH248
1.3.6.1.4.1.6321.1.2.3.4.16.10.1ScalarmaxNumOfVoipH248MgConfread-onlycurrentThe maximum number of virtual media gateway supported by the system.
1.3.6.1.4.1.6321.1.2.3.4.16.10.2NodevoipH248MgConf
1.3.6.1.4.1.6321.1.2.3.4.16.10.2.1ScalarvoipH248MgNameread-writecurrentMG name.
1.3.6.1.4.1.6321.1.2.3.4.16.10.2.2ScalarvoipH248MgEnableread-writecurrentEnable/disable MG.
1.3.6.1.4.1.6321.1.2.3.4.16.10.2.3ScalarvoipH248MgH248Profileread-writecurrentH248 profile name used by MG.
1.3.6.1.4.1.6321.1.2.3.4.16.10.2.4ScalarvoipH248MgPortread-writecurrentPort number used by MG.
1.3.6.1.4.1.6321.1.2.3.4.16.11NodevoipRing
1.3.6.1.4.1.6321.1.2.3.4.16.11.1TablevoipRingTablenot-accessiblecurrent
1.3.6.1.4.1.6321.1.2.3.4.16.11.1.1RowvoipRingEntrynot-accessiblecurrentAn entry of voipRouteTable.
1.3.6.1.4.1.6321.1.2.3.4.16.11.1.1.1ColumnvoipRingIndexread-onlycurrent
1.3.6.1.4.1.6321.1.2.3.4.16.11.1.1.2ColumnvoipRingNameread-createcurrentRing identifier used in SIP Alert-Info header field
1.3.6.1.4.1.6321.1.2.3.4.16.11.1.1.3ColumnvoipRingOn1read-createcurrentfirst on time in milliseconds
1.3.6.1.4.1.6321.1.2.3.4.16.11.1.1.4ColumnvoipRingOff1read-createcurrentfirst off time in milliseconds
1.3.6.1.4.1.6321.1.2.3.4.16.11.1.1.5ColumnvoipRingOn2read-createcurrentsecond on time in milliseconds
1.3.6.1.4.1.6321.1.2.3.4.16.11.1.1.6ColumnvoipRingOff2read-createcurrentsecond off time in milliseconds
1.3.6.1.4.1.6321.1.2.3.4.16.11.1.1.7ColumnvoipRingOn3read-createcurrentthird on time in milliseconds
1.3.6.1.4.1.6321.1.2.3.4.16.11.1.1.8ColumnvoipRingOff3read-createcurrentthird off time in milliseconds
1.3.6.1.4.1.6321.1.2.3.4.16.11.2ScalarvoipRingSetDefaultread-writecurrentSet the index to default value.
1.3.6.1.4.1.6321.1.2.3.4.16.12ScalarvoipBootRegDelayread-writecurrentRegistration delay in seconds.
1.3.6.1.4.1.6321.1.2.3.4.16.13NodevoipActiveCall
1.3.6.1.4.1.6321.1.2.3.4.16.13.1ScalarvoipActiveCallMaxActiveCallsread-writecurrentConfigure maximum number of concurrent active calls, 0~96.
1.3.6.1.4.1.6321.1.2.3.4.16.13.2ScalarvoipActiveCallThresholdread-writecurrentThe threshold to report or clear alarm, 50~100.
1.3.6.1.4.1.6321.1.2.3.4.16.100ScalarvoipModeread-writecurrentConfigure the Mode for VoIP Service.
1.3.6.1.4.1.6321.1.2.3.4.97NodeaesSeriesCommon
1.3.6.1.4.1.6321.1.2.3.4.98NodeiesSeriesCommon
1.3.6.1.4.1.6321.1.2.3.4.99NodeaccessSwitchCommonATM
MIB Viewer