IEEE8021-CFMD8-MIB
23 objects
No module-level DESCRIPTION found.
Imported Objects
| IF-MIB | InterfaceIndex InterfaceIndexOrZero |
| LLDP-MIB | LldpChassisId LldpChassisIdSubtype LldpPortId LldpPortIdSubtype |
| Q-BRIDGE-MIB | VlanId VlanIdOrNone |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | MacAddress RowStatus TAddress TDomain TEXTUAL-CONVENTION TimeInterval TimeStamp TruthValue |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Dot1afCfmIndexIntegerNextFree | always contains a legal value (if non-zero) for an index that is not currently used in the relevant table. The Command Generator (Network Management Application) reads this variable and uses the (non-zero) value read when creating a new row with an SNMP SET. When the SET is performed, the Command Responder (agent) must determine whether the value is indeed still unused; Two Network Management Applications may attempt to create a row (configuration entry) simultaneously and use the same value. If it is currently unused, the SET succeeds and the Command Responder (agent) changes the value of this object, according to an implementation-specific algorithm. If the value is in use, however, the SET fails. The Network Management Application must then re-read this variable to obtain a new usable value. | current | |
| Dot1agCfmCcmInterval | INTEGER { intervalInvalid (0), interval300Hz (1), interval10ms (2), interval100ms (3), interval1s (4), interval10s (5), interval1min (6), interval10min (7) } | current | Indicates the interval at which CCMs are sent by a MEP. The possible values are: intervalInvalid(0) No CCMs are sent (disabled). interval300Hz(1) CCMs are sent every 3 1/3 milliseconds (300Hz). interval10ms(2) CCMs are … |
| Dot1agCfmConfigErrors | BITS { cfmLeak(0), conflictingVids(1), excessiveLevels(2), overlappedLevels(3) } | current | While making the MIP creation evaluation described in 802.1ag clause 22.2.3, the management entity can encounter errors in the configuration. These are possible errors that can be encountered: CFMleak(0) MA x is associa… |
| Dot1agCfmEgressActionFieldValue | INTEGER { egrOK (1), egrDown (2), egrBlocked (3), egrVid (4) } Dot1agCfmRemoteMepState::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Operational state of the remote MEP state machine. This state machine monitors the reception of valid CCMs from a remote MEP with a specific MEPID. It uses a timer that expires in 3.5 times the length of time indicated by the dot1agCfmMaCcmInterval object. rMepIdle(1) Momentary state during reset. rMepStart(2) The timer has not expired since the state machine was reset, and no valid CCM has yet been received. rMepFailed(3) The timer has expired, both since the state machine was reset, and since a valid CCM was received. rMepOk(4) The timer has not expired since a valid CCM was received. " REFERENCE "802.1ag clauses 12.14.7.6.3:b, 20.22" SYNTAX INTEGER { rMepIdle (1), rMepStart (2), rMepFailed (3), rMepOk (4) } | current | Possible values returned in the egress action field |
| Dot1agCfmFngState | INTEGER { fngReset (1), fngDefect (2), fngReportDefect (3), fngDefectReported (4), fngDefectClearing (5) } | current | Indicates the diferent states of the MEP Fault Notification Generator State Machine. fngReset(1) No defect has been present since the dot1agCfmMepFngResetTime timer expired, or since the state machine was last reset. fn… |
| Dot1agCfmHighestDefectPri | INTEGER { none (0), defRDICCM (1), defMACstatus (2), defRemoteCCM (3), defErrorCCM (4), defXconCCM (5) } | current | An enumerated value, equal to the contents of the variable highestDefect (20.33.9 and Table 20-1), indicating the highest-priority defect that has been present since the MEP Fault Notification Generator State Machine wa… |
| Dot1agCfmIdPermission | INTEGER { sendIdNone (1), sendIdChassis (2), sendIdManage (3), sendIdChassisManage (4), sendIdDefer (5) } | current | Indicates what, if anything, is to be included in the Sender ID TLV transmitted in CCMs, LBMs, LTMs, and LTRs. The valid values are: sendIdNone(1) The Sender ID TLV is not to be sent. sendIdChassis(2) The Chassis ID Len… |
| Dot1agCfmIngressActionFieldValue | INTEGER { ingOk (1), ingDown (2), ingBlocked (3), ingVid (4) } | current | Possible values returned in the ingress action field. |
| Dot1agCfmInterfaceStatus | INTEGER { isNoInterfaceStatusTLV (0), isUp (1), isDown (2), isTesting (3), isUnknown (4), isDormant (5), isNotPresent (6), isLowerLayerDown (7) } | current | An enumerated value from the Interface Status TLV from the last CCM received from the last MEP. It indicates the status of the Interface within which the MEP transmitting the CCM is configured, or the next lower Interfa… |
| Dot1agCfmLowestAlarmPri | INTEGER { allDef (1), macRemErrXcon (2), remErrXcon (3), errXcon (4), xcon (5), noXcon (6) } | current | An integer value specifying the lowest priority defect that is allowed to generate a Fault Alarm (20.9.5), either: allDef(1) DefRDICCM, DefMACstatus, DefRemoteCCM, DefErrorCCM, and DefXconCCM; macRemErrXcon(2) Only DefM… |
| Dot1agCfmMaintAssocName | OCTET STRING (SIZE(1..45)) | current | Denotes a generic Maintenance Association Name. It is the part of the Maintenance Association Identifier which is unique within the Maintenance Domain Name and is appended to the Maintenance Domain Name to form the Main… |
| Dot1agCfmMaintAssocNameType | INTEGER { primaryVid (1), charString (2), unsignedInt16 (3), rfc2865VpnId (4) } | current | A value that represents a type (and thereby the format) of a Dot1agCfmMaintAssocName. The value can be one of the following: ieeeReserved(0) Reserved for definition by IEEE 802.1 recommend to not use zero unless absolut… |
| Dot1agCfmMaintDomainName | OCTET STRING (SIZE(1..43)) | current | Denotes a generic Maintenance Domain Name. A Dot1agCfmMaintDomainName value is always interpreted within the context of a Dot1agCfmMaintDomainNameType value. Every usage of the Dot1agCfmMaintDomainName textual conventio… |
| Dot1agCfmMaintDomainNameType | INTEGER { none (1), dnsLikeName (2), macAddressAndUint (3), charString (4) } | current | A value that represents a type (and thereby the format) of a Dot1agCfmMaintDomainName. The value can be one of the following: ieeeReserved(0) Reserved for definition by IEEE 802.1 recommend to not use zero unless absolu… |
| Dot1agCfmMDLevel | Integer32 (0..7) | current | Integer identifying the Maintenance Domain Level (MD Level). Higher numbers correspond to higher Maintenance Domains, those with the greatest physical reach, with the highest values for customers' CFM PDUs. Lower number… |
| Dot1agCfmMDLevelOrNone | Integer32 (-1 | 0..7) | current | Integer identifying the Maintenance Domain Level (MD Level). Higher numbers correspond to higher Maintenance Domains, those with the greatest physical reach, with the highest values for customers' CFM packets. Lower num… |
| Dot1agCfmMepDefects | BITS { bDefRDICCM(0), bDefMACstatus(1), bDefRemoteCCM(2), bDefErrorCCM(3), bDefXconCCM(4) } | current | A MEP can detect and report a number of defects, and multiple defects can be present at the same time. These defects are: bDefRDICCM(0) A remote MEP is reported the RDI bit in its last CCM. bDefMACstatus(1) Either some … |
| Dot1agCfmMepId | Unsigned32 (1..8191) | current | Maintenance association End Point Identifier (MEPID): A small integer, unique over a given Maintenance Association, identifying a specific MEP. |
| Dot1agCfmMepIdOrZero | Unsigned32 (0 | 1..8191) | current | Maintenance association End Point Identifier (MEPID): A small integer, unique over a given Maintenance Association, identifying a specific MEP. The special value 0 is allowed to indicate special cases, for example that … |
| Dot1agCfmMhfCreation | INTEGER { defMHFnone (1), defMHFdefault (2), defMHFexplicit (3), defMHFdefer (4) } | current | Indicates if the Management Entity can create MHFs. The valid values are: defMHFnone(1) No MHFs can be created for this VID. defMHFdefault(2) MHFs can be created on this VID on any Bridge port through which this VID can… |
| Dot1agCfmMpDirection | INTEGER { down (1), up (2) } | current | Indicates the direction in which the Maintenance association (MEP or MIP) faces on the bridge port: down(1) Sends Continuity Check Messages away from the MAC Relay Entity. up(2) Sends Continuity Check Messages towards t… |
| Dot1agCfmPortStatus | INTEGER { psNoPortStateTLV (0), psBlocked (1), psUp (2) } | current | An enumerated value from he Port Status TLV from the last CCM received from the last MEP. It indicates the ability of the Bridge Port on which the transmitting MEP resides to pass ordinary data, regardless of the status… |
| Dot1agCfmRelayActionFieldValue | INTEGER { rlyHit (1), rlyFdb (2), rlyMpdb (3) } | current | Possible values the Relay action field can take. |